@camstack/addon-model-studio 1.1.164 → 1.1.165

package/dist/model-studio.addon.js

@@ -5884,7 +5884,7 @@ var ZodIssueCode = {
 var ZodFirstPartyTypeKind;
 ZodFirstPartyTypeKind || (ZodFirstPartyTypeKind = {});
 //#endregion
-//#region ../types/dist/sleep-De1BvmWo.mjs
+//#region ../types/dist/sleep-i3eUVc-d.mjs
 /**
 * The audio chunk plane's byte format, and the ONE expansion from a coded
 * window to float samples (D455).
@@ -13930,6 +13930,97 @@ method(object({ integrationId: string() }), object({ filters: array(AdoptionFilt
 	auth: "admin"
 });
 /**
+* device-admin-link — "this device has a management page of its own, and here
+* is its address".
+*
+* ## Why this is not a `deviceConfig` cap
+*
+* There is nothing to edit. A `deviceConfig` cap (D14) exists so the framework
+* can DERIVE a settings form from `getOptions` + `getStatus` and route a flat
+* patch back through a setter; it costs a `builderId` reducer in
+* `device-config-contribution.ts` and a `*-config-schema.ts` beside it, and it
+* renders a form section. This cap answers ONE question with ONE read and
+* renders a button. Nothing about it is a form, so it carries no `deviceConfig`
+* block, no `settings`, no `runtimeState` and no reducer — exactly like
+* `reboot`, the other pure-RPC device-native cap.
+*
+* ## Absent, and the difference between "no page" and "we cannot say"
+*
+* The two are answered at DIFFERENT layers, on purpose:
+*
+*  - **"We cannot say"** → the provider never registers the cap for that
+*    device. A VeSync humidifier, a Petkit feeder, a Dreame vacuum and a Dreo
+*    fan are reached only through a vendor cloud; there is no address to hand
+*    out and no page to open. A Tuya plug, a Wyze camera and a Gree air
+*    conditioner DO have a LAN IP, and still have no HTTP management page
+*    behind it. None of them register, so `deviceManager.getBindings` never
+*    lists the cap and no surface asks.
+*  - **"This device has no page, and I know that"** → the provider registers
+*    and `getAdminLink` returns `null`. This is the answer for a device whose
+*    sibling DOES have a page: a Reolink battery camera reached over UDP by
+*    `uid` with a blank `host`, an Ecowitt gateway configured in `listener`
+*    transport, a Home Assistant broker authenticated by supervisor token
+*    (which carries no `baseUrl` at all).
+*
+* Both draw NOTHING. A button that opens a browser error is worse than no
+* button, and D62 is the same rule from the other side: an off switch is
+* reported off, never made to look broken. There is no third state where the
+* UI renders a disabled button "because the device might have a page".
+*
+* ## The URL never carries credentials
+*
+* Not in userinfo, not in a query string. Every provider builds through
+* `buildDeviceAdminUrl` (`device-admin-link-url.ts`), which takes host, port,
+* scheme and path as separate arguments — there is no parameter a secret could
+* arrive in — and re-checks its own output for the `scheme://user:pass@` shape
+* that `scripts/check-no-credential-urls-in-fixtures.ts` bans from recorded
+* output. `scripts/check-admin-link-builder-is-the-only-url-source.ts` is what
+* keeps providers from hand-rolling one anyway.
+*
+* This matters here more than anywhere else in the repo, because every provider
+* that knows a device's host knows its PASSWORD too: `{ host, port, username,
+* password }` sit in one object on Hikvision, Amcrest, Reolink and ONVIF alike,
+* and `http://admin:hunter2@192.168.50.139/` is a URL a browser accepts. The
+* camera's own page will ask for its own login. That is correct, and pre-
+* filling it is the operator's business, not ours.
+*
+* ## It is a LAN fact
+*
+* The URL addresses the device where the NODE can see it. It is not proxied,
+* not made reachable from outside, and not sent anywhere. A surface renders it
+* as a link the operator's own browser follows, on the operator's own network,
+* or renders nothing.
+*/
+/**
+* Whose page is it. The distinction is for the OPERATOR, who needs to know
+* before clicking whether he is about to land on a camera's own web server or
+* inside Home Assistant.
+*/
+var AdminLinkTargetEnum = _enum(["device", "integration"]);
+var DeviceAdminLinkSchema = object({
+	/**
+	* Absolute `http(s)://` URL. Built by `buildDeviceAdminUrl` and therefore
+	* free of userinfo and of any credential-shaped query key.
+	*/
+	url: string(),
+	/**
+	* What the surface calls it — "Web UI", "Home Assistant", "UniFi controller".
+	* The PROVIDER names it, because only the provider knows what the page is;
+	* a UI that invented the label from the addon id would call the Home
+	* Assistant device page "Provider Homeassistant".
+	*/
+	label: string(),
+	target: AdminLinkTargetEnum,
+	/**
+	* Host the URL points at, without scheme, port or path — for the tooltip, so
+	* an operator can see WHERE the button goes before he follows it. Redundant
+	* with `url` by construction; carried separately so no surface has to parse
+	* a URL to show it.
+	*/
+	host: string()
+});
+method(object({ deviceId: number().int().nonnegative() }), DeviceAdminLinkSchema.nullable(), { auth: "admin" });
+/**
 * `device-export` — collection cap for addons that export camstack
 * devices to external ecosystems (HomeAssistant via MQTT discovery,
 * HomeKit/HAP, Alexa Smart Home, …).
@@ -26713,6 +26804,307 @@ DeviceType.Camera, method(object({ deviceId: number() }), DayNightOptionsSchema)
 	auth: "admin"
 });
 /**
+* Vendor-neutral **onboard** recording + storage cap — what the CAMERA
+* writes to the CAMERA's own card, on the camera's own schedule.
+*
+* This is NOT `recording.cap.ts`. That one is CamStack's recorder: our
+* footage ledger, our storage locations, our retention. This one has a
+* different authority — the camera's firmware — and per D62 it stores
+* nothing of its own. Every value here is read from the camera and every
+* write goes back to the camera; there is no CamStack-side mirror that
+* could disagree with the device.
+*
+* ## One shape, two firmwares
+*
+* Measured 2026-09-22 against the live fleet:
+*
+* | fact | Hikvision (ISAPI) | Reolink (Baichuan) |
+* | --- | --- | --- |
+* | storage | `ContentMgmt/Storage` `<hdd>` rows: status, capacity, freeSpace (MB) | `getHddInfoList` (cmd 102): `mount`, `format`, `capacity` GB + `capacityM` MB remainder |
+* | tracks | several (101 **and** 103 on both 1436 and 3833), each with its own schedule | one per channel |
+* | schedule | per track, 7 `ScheduleAction` blocks: DayOfWeek + TimeOfDay range + ONE `ActionRecordingMode` | per trigger type, a 168-char weekly HOUR mask |
+* | triggers | `CMR`, `MOTION` | `Normal`, `MD`, `people`, `vehicle`, `dog_cat`, `crossline`, `intrude`, `loitering` |
+* | pre-record | `PreRecordTimeSeconds` | `preRecordTime` |
+* | post-record | `PostRecordTimeSeconds` | `recordDelayTime` |
+* | overwrite | per track `LoopEnable` | `cycle`, with `cycleList` enumerating the accepted values |
+* | segment length | not exposed on V5.7.1 | `packageTime` (minutes) |
+*
+* The two schedule models look different and are the same thing in
+* different coordinates: both answer "for this trigger, during which
+* weekly windows does the camera record". {@link RecordWindow} is that
+* question in one shape — Hikvision's ranges map straight onto it,
+* Reolink's mask expands into hour-aligned windows.
+*
+* ## Union, not intersection
+*
+* **The same fields exist on every camera.** What differs per device is
+* which VALUES that device accepts, and that is what {@link
+* RecordingOnboardOptions} reports — a `{ readable, writable, reason }`
+* per field plus the schedule's own limits. A control a camera cannot
+* honour is rendered DISABLED WITH ITS REASON, never missing and never
+* dead: disabled must not look like broken.
+*
+* ## Refusal by name
+*
+* A write a camera cannot honour is refused with a sentence the operator
+* can read — never accepted and dropped. Both providers refuse through
+* {@link describeOnboardRefusal}, so the vocabulary is one function and
+* one test, not two hand-written vendor opinions.
+*
+* Follows the D14 `deviceConfig` archetype (see `stream-params.cap.ts`):
+* `getOptions` advertises per-camera availability, `getStatus` (auto-
+* injected from `status`) reports the live values, and a single
+* `setSettings` mutation applies a partial change. No hand-written
+* settings-contribution methods.
+*/
+/**
+* What makes the camera start recording during a window.
+*
+* The union of both vendors' vocabularies. `continuous` is Hikvision's
+* `CMR` and Reolink's `Normal`; `motion` is `MOTION` / `MD`. The
+* object-class triggers are Reolink-only today and the smart-event ones
+* (`lineCrossing`, `intrusion`, `loitering`) are Reolink-only on the
+* firmwares measured — a camera that cannot record on a trigger simply
+* does not list it in `options.schedule.triggers`, and a window naming
+* it is REFUSED, not dropped.
+*/
+var RecordTriggerSchema = _enum([
+	"continuous",
+	"motion",
+	"person",
+	"vehicle",
+	"animal",
+	"lineCrossing",
+	"intrusion",
+	"loitering",
+	"alarmInput"
+]);
+/**
+* One weekly recording window: "on `day`, from `startMinute` to
+* `endMinute`, record on `trigger`".
+*
+* `day` is 0 = Monday … 6 = Sunday (ISO order, which is also the order
+* both firmwares enumerate). Minutes are local camera time since
+* midnight; `endMinute` may be 1440, meaning end of day — that is
+* Hikvision's literal `24:00` and Reolink's 24th mask slot, and
+* collapsing it to 0 would turn a whole-day window into an empty one.
+*/
+var RecordWindowSchema = object({
+	trigger: RecordTriggerSchema,
+	day: number().int().min(0).max(6),
+	startMinute: number().int().min(0).max(1439),
+	endMinute: number().int().min(1).max(1440)
+});
+/** Status of one physical volume, as the camera itself describes it. */
+var OnboardStorageVolumeSchema = object({
+	/** The camera's own id for the volume (`hdd/id`, Reolink `HddInfo/number`). */
+	id: string(),
+	/** The camera's own name for it, when it gives one (`hddName`). */
+	label: string().optional(),
+	status: _enum([
+		"ok",
+		"unformatted",
+		"error",
+		"offline",
+		"unknown"
+	]),
+	/**
+	* Total size in MB, or **null when the camera did not say**.
+	*
+	* Never 0 for an unreadable value: a measurement that failed is not a
+	* measurement (D393), and a card whose size is unknown must not be
+	* rendered as a card of size zero.
+	*/
+	capacityMb: number().nullable(),
+	/**
+	* Free space in MB, or null when unknown.
+	*
+	* **Not a proxy for "has footage".** Measured 2026-09-22: 1436 and
+	* 1439 both report exactly 11776 MB free — the fixed reserve a looping
+	* card converges on once it has wrapped. At loop steady state the
+	* number is identical whether the camera recorded yesterday or stopped
+	* a month ago.
+	*/
+	freeMb: number().nullable(),
+	/** True when the camera reports the volume writable (`property` RW). */
+	writable: boolean().optional()
+});
+object({
+	storage: discriminatedUnion("kind", [
+		object({
+			kind: literal("present"),
+			volumes: array(OnboardStorageVolumeSchema)
+		}),
+		object({
+			kind: literal("absent"),
+			reason: string()
+		}),
+		object({
+			kind: literal("unknown"),
+			reason: string()
+		})
+	]),
+	tracks: array(object({
+		id: string(),
+		enabled: boolean(),
+		isVideo: boolean(),
+		/** From the camera's own track description. Null when it does not say. */
+		codec: string().nullable(),
+		resolution: string().nullable(),
+		/** Per-track overwrite flag, where the firmware keeps it per track. */
+		overwriteWhenFull: boolean().nullable()
+	})),
+	/**
+	* The track the write path targets — the enabled VIDEO one. Null when
+	* no track could be identified, which is itself a refusal reason.
+	*/
+	primaryTrackId: string().nullable(),
+	/** Master "record to the card at all" switch. */
+	enabled: boolean().nullable(),
+	overwriteWhenFull: boolean().nullable(),
+	preRecordSec: number().nullable(),
+	postRecordSec: number().nullable(),
+	/** Length of one recorded file, in minutes. */
+	segmentMinutes: number().nullable(),
+	/** The primary track's weekly windows, flattened. */
+	windows: array(RecordWindowSchema),
+	/**
+	* How many windows the camera described that CamStack could NOT read —
+	* an unrecognised trigger, an unparseable clock, a weekday it does not
+	* name.
+	*
+	* A dropped window is work the reader threw away, and a schedule that
+	* silently shows fewer rows than the camera holds is how an operator
+	* saves back a schedule shorter than the one they were looking at
+	* (D391). Non-zero means the window list is INCOMPLETE and a write
+	* that replaces it would delete what was not shown — which is why a
+	* provider reporting a non-zero count also reports the schedule as not
+	* writable.
+	*/
+	unreadableWindows: number(),
+	/**
+	* The camera is scheduled to record and has NO usable storage.
+	*
+	* A first-class fact because it is the fleet's most common silent
+	* defect: measured 2026-09-22, 1441 and 3831 are both motion-recording
+	* to a card that is not there. Neither the schedule nor the storage
+	* read says anything wrong on its own; only the pair does.
+	*/
+	recordingToNowhere: boolean(),
+	lastFetchedAt: number()
+});
+/** Numeric range descriptor — `{ min, max, step }` per the getOptions convention. */
+var RangeSchema = object({
+	min: number(),
+	max: number(),
+	step: number()
+});
+/**
+* The values a camera actually takes for a numeric field, when they are a SET
+* rather than a range.
+*
+* `{min,max,step}` cannot say what these two firmwares do. Measured on 1436
+* (I91DN) on 2026-09-22 by writing each value and reading it back:
+*
+* - pre-record: `0, 5, 10, 15, 20, 25, 30` and `2147483647` (INT32_MAX, the
+*   camera's "no limit" — `-1` and `4294967295` both land on it);
+* - post-record: `5, 10, 30, 60, 120, 300, 600`.
+*
+* Neither is expressible as a step: the first has a sentinel two billion away
+* from its neighbours, the second doubles and then jumps. A range that tried
+* would forbid values the camera takes AND permit values it silently replaces
+* with 5 — wrong in both directions at once.
+*
+* `sentinel` names the member that is not a duration, so a surface can render
+* "no limit" instead of `2147483647` seconds.
+*/
+var AllowedValuesSchema = object({
+	values: array(number()).min(1),
+	sentinel: object({
+		value: number(),
+		meaning: _enum(["no-limit", "disabled"])
+	}).optional()
+});
+/**
+* Per-field availability on ONE camera.
+*
+* The field exists on every camera — this says whether this one can be
+* read and whether it can be written, and `reason` says why not when
+* either is false. The UI renders the control DISABLED with the reason
+* rather than hiding it, so a limitation is legible instead of looking
+* like a missing feature.
+*/
+var OnboardFieldSupportSchema = object({
+	readable: boolean(),
+	writable: boolean(),
+	/** Required whenever `readable` or `writable` is false. */
+	reason: string().optional()
+});
+/** What this camera's schedule model can express. */
+var OnboardScheduleSupportSchema = object({
+	support: OnboardFieldSupportSchema,
+	/**
+	* The smallest time step the camera can express, in minutes.
+	*
+	* Hikvision takes arbitrary minutes (`00:05:00`–`23:57:00` observed on
+	* 1436's track 103). Reolink's schedule is a 7×24 HOUR mask, so 60. A
+	* window whose edges are not a multiple of this is REFUSED rather than
+	* quietly rounded — rounding is how an operator's 06:30 becomes 06:00
+	* and nothing says so.
+	*/
+	granularityMinutes: number(),
+	/** Triggers this camera can record on. A window naming another is refused. */
+	triggers: array(RecordTriggerSchema),
+	/**
+	* False when the camera stores ONE trigger per time range, so two
+	* windows overlapping on the same day cannot carry different triggers.
+	* True on Reolink, whose mask is per-trigger and independent.
+	*/
+	supportsOverlappingTriggers: boolean()
+});
+var RecordingOnboardOptionsSchema = object({
+	enabled: OnboardFieldSupportSchema,
+	overwriteWhenFull: OnboardFieldSupportSchema,
+	preRecordSec: OnboardFieldSupportSchema,
+	preRecordSecRange: RangeSchema.optional(),
+	/** Preferred over the range when the camera takes a SET, not a span. */
+	preRecordSecAllowed: AllowedValuesSchema.optional(),
+	postRecordSec: OnboardFieldSupportSchema,
+	postRecordSecRange: RangeSchema.optional(),
+	/** Preferred over the range when the camera takes a SET, not a span. */
+	postRecordSecAllowed: AllowedValuesSchema.optional(),
+	segmentMinutes: OnboardFieldSupportSchema,
+	segmentMinutesRange: RangeSchema.optional(),
+	/** Preferred over the range when the camera takes a SET, not a span. */
+	segmentMinutesAllowed: AllowedValuesSchema.optional(),
+	schedule: OnboardScheduleSupportSchema
+});
+/**
+* A partial change. Every field optional.
+*
+* Unlike the other `deviceConfig` caps, a provider here does **NOT**
+* silently ignore a field it cannot support — it refuses, by name,
+* through {@link describeOnboardRefusal}. Silence on a recording setting
+* is the failure D62 exists to prevent: the operator believes the camera
+* is recording the way the form says, and it is not.
+*/
+var RecordingOnboardPatchSchema = object({
+	enabled: boolean().optional(),
+	overwriteWhenFull: boolean().optional(),
+	preRecordSec: number().optional(),
+	postRecordSec: number().optional(),
+	segmentMinutes: number().optional(),
+	/** The complete new window set for the primary track — not a delta. */
+	windows: array(RecordWindowSchema).optional()
+});
+DeviceType.Camera, method(object({ deviceId: number() }), RecordingOnboardOptionsSchema), method(object({
+	deviceId: number(),
+	settings: RecordingOnboardPatchSchema
+}), _void(), {
+	kind: "mutation",
+	auth: "admin"
+});
+/**
 * Generic device-level status snapshot. Auto-registered by `BaseDevice`
 * for every device, regardless of provider — the kernel needs a uniform
 * cap-keyed slice for the basic device flags every consumer expects to
@@ -35705,6 +36097,12 @@ Object.freeze({
 		addonId: null,
 		access: "view"
 	},
+	"deviceAdminLink.getAdminLink": {
+		capName: "device-admin-link",
+		capScope: "device",
+		addonId: null,
+		access: "view"
+	},
 	"deviceAdoption.adopt": {
 		capName: "device-adoption",
 		capScope: "system",
@@ -39743,6 +40141,24 @@ Object.freeze({
 		addonId: null,
 		access: "view"
 	},
+	"recordingOnboard.getOptions": {
+		capName: "recording-onboard",
+		capScope: "device",
+		addonId: null,
+		access: "view"
+	},
+	"recordingOnboard.getStatus": {
+		capName: "recording-onboard",
+		capScope: "device",
+		addonId: null,
+		access: "view"
+	},
+	"recordingOnboard.setSettings": {
+		capName: "recording-onboard",
+		capScope: "device",
+		addonId: null,
+		access: "create"
+	},
 	"recordingSignal.getStatus": {
 		capName: "recording-signal",
 		capScope: "device",
@@ -41629,6 +42045,11 @@ Object.freeze({
 		form: "single",
 		optional: true
 	}],
+	"deviceAdminLink.getAdminLink": [{
+		name: "deviceId",
+		form: "single",
+		optional: false
+	}],
 	"deviceAdoption.release": [{
 		name: "camDeviceId",
 		form: "single",
@@ -43014,6 +43435,16 @@ Object.freeze({
 		form: "single",
 		optional: true
 	}],
+	"recordingOnboard.getOptions": [{
+		name: "deviceId",
+		form: "single",
+		optional: false
+	}],
+	"recordingOnboard.setSettings": [{
+		name: "deviceId",
+		form: "single",
+		optional: false
+	}],
 	"recordingSignal.getStatus": [{
 		name: "deviceId",
 		form: "single",