@camstack/addon-export-hap 1.2.75 → 1.2.77

package/dist/hap-export.addon.js

@@ -8219,7 +8219,8 @@ var CameraSwitchAuthoritySchema = discriminatedUnion("kind", [
 var CameraSwitchUnavailableReasonSchema = _enum([
 	"no-provider",
 	"source-unreachable",
-	"not-configured"
+	"not-configured",
+	"device-disabled"
 ]);
 /**
 * One switch, resolved for one camera.
@@ -13554,7 +13555,12 @@ var ConfigEntrySchema = object({
 	value: unknown(),
 	description: string().optional()
 });
-var LinkedDevicesModeSchema = _enum(["auto", "manual"]);
+/**
+* Only `manual` since D356: the operator picks, nothing links itself. The
+* field survives on the wire because a viewer already OTA'd parses it —
+* drop it once no shipped client reads `mode`.
+*/
+var LinkedDevicesModeSchema = _enum(["manual"]);
 /** One resolved linked device — the compact projection consumers need. */
 var LinkedDeviceSchema = object({
 	deviceId: number(),
@@ -23876,12 +23882,20 @@ var BatteryStatusSchema = object({
 	* Charging source. `'dc'` covers wall/USB adapters; `'solar'` is
 	* Reolink-specific for the Solar Panel 2 accessory (will become
 	* common on other battery cams). `'none'` means running on battery
-	* alone.
+	* alone — a NEGATIVE the firmware actually reported.
+	*
+	* `'unknown'` is the absence of an answer: the provider has not read the
+	* power fields yet, or the firmware reported neither. Before it existed,
+	* two unreadable fields produced `'none'`, and a camera nobody had reached
+	* was drawn "on battery alone" — the same D315 defect `percentage` closed
+	* by going nullable. Consumers SKIP it (no charger state published, no
+	* glyph, no HomeKit ChargingState) rather than coerce it either way.
 	*/
 	charging: _enum([
 		"dc",
 		"solar",
-		"none"
+		"none",
+		"unknown"
 	]),
 	/**
 	* True when the camera firmware has gone into low-power mode. Battery
@@ -85461,10 +85475,12 @@ var LOW_BATTERY_THRESHOLD_PCT = 20;
 *  - `BatteryStatus.charging`:
 *      `'none'` → `ChargingState.NOT_CHARGING`
 *      `'dc' | 'solar'` → `ChargingState.CHARGING`
+*      `'unknown'` (or absent) → not written; HomeKit has no "unknown" and
+*      either value would be a claim
 *  - `percentage <= LOW_BATTERY_THRESHOLD_PCT` → `StatusLowBattery.LOW`
 */
 var batteryCharacteristicUpdates = reader(BatteryStatusSchema.pick({ percentage: true }).extend({ charging: BatteryStatusSchema.shape.charging.optional() }), (status) => {
-	if (status.percentage === null) return status.charging === void 0 ? [] : [{
+	if (status.percentage === null) return status.charging === void 0 || status.charging === "unknown" ? [] : [{
 		characteristic: import_dist.Characteristic.ChargingState,
 		value: status.charging === "none" ? import_dist.Characteristic.ChargingState.NOT_CHARGING : import_dist.Characteristic.ChargingState.CHARGING
 	}];
@@ -85474,7 +85490,7 @@ var batteryCharacteristicUpdates = reader(BatteryStatusSchema.pick({ percentage:
 			characteristic: import_dist.Characteristic.BatteryLevel,
 			value: pct
 		},
-		...status.charging === void 0 ? [] : [{
+		...status.charging === void 0 || status.charging === "unknown" ? [] : [{
 			characteristic: import_dist.Characteristic.ChargingState,
 			value: status.charging === "none" ? import_dist.Characteristic.ChargingState.NOT_CHARGING : import_dist.Characteristic.ChargingState.CHARGING
 		}],

package/dist/hap-export.addon.mjs

@@ -8207,7 +8207,8 @@ var CameraSwitchAuthoritySchema = discriminatedUnion("kind", [
 var CameraSwitchUnavailableReasonSchema = _enum([
 	"no-provider",
 	"source-unreachable",
-	"not-configured"
+	"not-configured",
+	"device-disabled"
 ]);
 /**
 * One switch, resolved for one camera.
@@ -13542,7 +13543,12 @@ var ConfigEntrySchema = object({
 	value: unknown(),
 	description: string().optional()
 });
-var LinkedDevicesModeSchema = _enum(["auto", "manual"]);
+/**
+* Only `manual` since D356: the operator picks, nothing links itself. The
+* field survives on the wire because a viewer already OTA'd parses it —
+* drop it once no shipped client reads `mode`.
+*/
+var LinkedDevicesModeSchema = _enum(["manual"]);
 /** One resolved linked device — the compact projection consumers need. */
 var LinkedDeviceSchema = object({
 	deviceId: number(),
@@ -23864,12 +23870,20 @@ var BatteryStatusSchema = object({
 	* Charging source. `'dc'` covers wall/USB adapters; `'solar'` is
 	* Reolink-specific for the Solar Panel 2 accessory (will become
 	* common on other battery cams). `'none'` means running on battery
-	* alone.
+	* alone — a NEGATIVE the firmware actually reported.
+	*
+	* `'unknown'` is the absence of an answer: the provider has not read the
+	* power fields yet, or the firmware reported neither. Before it existed,
+	* two unreadable fields produced `'none'`, and a camera nobody had reached
+	* was drawn "on battery alone" — the same D315 defect `percentage` closed
+	* by going nullable. Consumers SKIP it (no charger state published, no
+	* glyph, no HomeKit ChargingState) rather than coerce it either way.
 	*/
 	charging: _enum([
 		"dc",
 		"solar",
-		"none"
+		"none",
+		"unknown"
 	]),
 	/**
 	* True when the camera firmware has gone into low-power mode. Battery
@@ -85449,10 +85463,12 @@ var LOW_BATTERY_THRESHOLD_PCT = 20;
 *  - `BatteryStatus.charging`:
 *      `'none'` → `ChargingState.NOT_CHARGING`
 *      `'dc' | 'solar'` → `ChargingState.CHARGING`
+*      `'unknown'` (or absent) → not written; HomeKit has no "unknown" and
+*      either value would be a claim
 *  - `percentage <= LOW_BATTERY_THRESHOLD_PCT` → `StatusLowBattery.LOW`
 */
 var batteryCharacteristicUpdates = reader(BatteryStatusSchema.pick({ percentage: true }).extend({ charging: BatteryStatusSchema.shape.charging.optional() }), (status) => {
-	if (status.percentage === null) return status.charging === void 0 ? [] : [{
+	if (status.percentage === null) return status.charging === void 0 || status.charging === "unknown" ? [] : [{
 		characteristic: import_dist.Characteristic.ChargingState,
 		value: status.charging === "none" ? import_dist.Characteristic.ChargingState.NOT_CHARGING : import_dist.Characteristic.ChargingState.CHARGING
 	}];
@@ -85462,7 +85478,7 @@ var batteryCharacteristicUpdates = reader(BatteryStatusSchema.pick({ percentage:
 			characteristic: import_dist.Characteristic.BatteryLevel,
 			value: pct
 		},
-		...status.charging === void 0 ? [] : [{
+		...status.charging === void 0 || status.charging === "unknown" ? [] : [{
 			characteristic: import_dist.Characteristic.ChargingState,
 			value: status.charging === "none" ? import_dist.Characteristic.ChargingState.NOT_CHARGING : import_dist.Characteristic.ChargingState.CHARGING
 		}],

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@camstack/addon-export-hap",
-  "version": "1.2.75",
+  "version": "1.2.77",
   "description": "HomeKit (HAP) exporter for CamStack devices. Publishes each exposed device as its own HomeKit accessory: cameras and doorbells with SRTP streaming, HomeKit Secure Video, motion, two-way audio, PTZ and battery; switches, lights, locks and sensors through a capability→service table.",
   "keywords": [
     "camstack",