@camstack/addon-auth 1.2.78 → 1.2.79

package/dist/{dist-CuXyrGjy.js → dist-B_kQwQY0.js}

@@ -6444,6 +6444,21 @@ var CameraStreamSchema = object({
 	*/
 	autoEligible: boolean().optional(),
 	/**
+	* The profile slot the PUBLISHER says this stream is: `low` for a stream
+	* whose only sensible role is the low-bandwidth one, `high` for a main
+	* stream. Consulted by the broker's automatic ranking
+	* (`rankInitialAssignment`) BEFORE the pixel-count heuristic, and only there:
+	* an operator's manual assignment still wins, and an absent hint is the
+	* pixel-ranked default every camera had before this field existed.
+	*
+	* Why it exists: a camera with ONE stream ranked to `mid` — the slot no
+	* storage class is written for on its own (`recordings` is high|mid,
+	* `recordingsLow` is low) and the one profile scrub does not read. The robot
+	* camera's single 720p relay is a `low` in every respect except the slot the
+	* heuristic put it in.
+	*/
+	profileHint: CamProfileSchema.optional(),
+	/**
 	* Transport-specific opaque metadata. The broker passes it through to
 	* the source reader without inspecting it. Currently used by
 	* `pull-rfc4571` streams to carry the upstream SDP (so the reader can
@@ -8008,7 +8023,22 @@ var RecordingTriggersSchema = object({
 	* il livello: un contatto trovato già aperto al riavvio del runner non fa
 	* registrare.
 	*/
-	sensorDeviceIds: array(number().int().positive()).min(1).max(16).refine(noDuplicates, { message: "sensorDeviceIds must not repeat a device" }).optional()
+	sensorDeviceIds: array(number().int().positive()).min(1).max(16).refine(noDuplicates, { message: "sensorDeviceIds must not repeat a device" }).optional(),
+	/**
+	* La camera registra per tutta la durata del SEGNALE che lei stessa
+	* pubblica — la cap `recording-signal` (`active: true` mentre il device è in
+	* funzione: un robot che pulisce). È un LIVELLO, non un fronte: la finestra
+	* resta aperta finché il segnale è alto e si chiude `postBufferSec` dopo la
+	* caduta, così una pulizia di quaranta minuti è UNA clip.
+	*
+	* Non nomina un device: il segnale è della camera stessa, tenuto fresco dal
+	* suo provider (D224); il recorder lo ascolta su `DeviceStateChanged` e lo
+	* riconcilia leggendo la slice via RPC, con un tetto oltre il quale un
+	* segnale mai abbassato (un evento perso) non può tenere aperta una
+	* registrazione (D11). Vedi `recorder/addon/band-decision.ts`
+	* (`holdTrigger` / `releaseTrigger`).
+	*/
+	deviceSignal: boolean().optional()
 });
 /**
 * Mode of a single recording band — the recorder per-band vocabulary.
@@ -11523,6 +11553,8 @@ method(object({
 	label: string().optional(),
 	deviceFeatures: array(string()).optional(),
 	autoEligible: boolean().optional(),
+	/** The slot the publisher says this stream IS — see `CameraStreamSchema.profileHint`. */
+	profileHint: CamProfileSchema.optional(),
 	metadata: record(string(), unknown()).optional(),
 	/** Required when kind === 'derived' — the source camStreamId the
 	*  derived broker reads its encoded plane from.
@@ -27875,6 +27907,47 @@ method(object({
 	auth: "protected"
 });
 /**
+* A camera's own "record me NOW" LEVEL — a signal the device raises while
+* something it knows about is happening (a robot vacuum cleaning, a machine
+* running, a gate open) and lowers when it stops.
+*
+* It is a level, not an edge. The sensor triggers the recorder already listens
+* to (`SOURCE_CAP_ACTIVE_FIELD`) fire on a rising edge and record for a fixed
+* post-buffer; a cleaning lasts forty minutes, and forty minutes of "this is
+* still happening" cannot be expressed as an edge plus a post-buffer without
+* either re-triggering on a timer (polling — D224 forbids the consumer keeping
+* the fact fresh) or picking a post-buffer long enough to cover every job,
+* which records the dock for that long after every short one. So the recorder
+* reads the LEVEL: it records for as long as `active` is true, plus the band's
+* own post-buffer once it falls.
+*
+* Who owns the fact: the PROVIDER of the device, which already reads the state
+* the signal is derived from (the vacuum's lifecycle state, for Dreame). It
+* writes this slice on every change; consumers subscribe to the kernel's
+* `DeviceStateChanged` for it and read it back through
+* `deviceState.getCapSlice` to reconcile — never a second copy, never a poll
+* against the device (D224, D8/D11).
+*
+* Deliberately NOT a `binary` sensor on the camera: a binary sensor is exported
+* to Home Assistant, HomeKit and the sensor picker as a thing an operator can
+* bind, and "the camera wants to record" is not a room sensor. It is a fact
+* about the camera, on the camera.
+*/
+var RecordingSignalStatusSchema = object({
+	/** True while the device asks to be recorded. */
+	active: boolean(),
+	/**
+	* Why, in the provider's own vocabulary (a vacuum's `cleaning` / `docked`,
+	* …). Free text for the log line and the UI badge; the recorder never
+	* branches on it.
+	*/
+	reason: string(),
+	/** Ms epoch of the last `active` transition. 0 if never observed. */
+	lastChangedAt: number()
+});
+RecordingSignalStatusSchema.extend({ lastFetchedAt: number() });
+DeviceType.Camera, method(object({ deviceId: number() }), RecordingSignalStatusSchema);
+/**
 * scene-monitor — device-scoped reference-region state cap. An operator marks
 * a rect ROI on a camera frame and names one or more states; the engine
 * (pipeline-analytics, designated post-processing node) reports which state is
@@ -28247,6 +28320,8 @@ var CamStreamDescriptorSchema = object({
 	deviceFeatures: array(string()).optional(),
 	/** Eligible for automatic profile assignment. Absent = `true`. */
 	autoEligible: boolean().optional(),
+	/** The slot the publisher says this stream IS — see `CameraStreamSchema.profileHint`. */
+	profileHint: CamProfileSchema.optional(),
 	/** Transport-specific opaque metadata (e.g. rfc4571 SDP). */
 	metadata: record(string(), unknown()).optional()
 });
@@ -34192,6 +34267,12 @@ Object.freeze({
 		addonId: null,
 		access: "view"
 	},
+	"recordingSignal.getStatus": {
+		capName: "recording-signal",
+		capScope: "device",
+		addonId: null,
+		access: "view"
+	},
 	"sceneMonitor.captureReference": {
 		capName: "scene-monitor",
 		capScope: "device",
@@ -37184,6 +37265,11 @@ Object.freeze({
 		form: "single",
 		optional: true
 	}],
+	"recordingSignal.getStatus": [{
+		name: "deviceId",
+		form: "single",
+		optional: false
+	}],
 	"sceneMonitor.captureReference": [{
 		name: "deviceId",
 		form: "single",

package/dist/{dist-1fcG0PiH.mjs → dist-Z61zMCWZ.mjs}

@@ -6444,6 +6444,21 @@ var CameraStreamSchema = object({
 	*/
 	autoEligible: boolean().optional(),
 	/**
+	* The profile slot the PUBLISHER says this stream is: `low` for a stream
+	* whose only sensible role is the low-bandwidth one, `high` for a main
+	* stream. Consulted by the broker's automatic ranking
+	* (`rankInitialAssignment`) BEFORE the pixel-count heuristic, and only there:
+	* an operator's manual assignment still wins, and an absent hint is the
+	* pixel-ranked default every camera had before this field existed.
+	*
+	* Why it exists: a camera with ONE stream ranked to `mid` — the slot no
+	* storage class is written for on its own (`recordings` is high|mid,
+	* `recordingsLow` is low) and the one profile scrub does not read. The robot
+	* camera's single 720p relay is a `low` in every respect except the slot the
+	* heuristic put it in.
+	*/
+	profileHint: CamProfileSchema.optional(),
+	/**
 	* Transport-specific opaque metadata. The broker passes it through to
 	* the source reader without inspecting it. Currently used by
 	* `pull-rfc4571` streams to carry the upstream SDP (so the reader can
@@ -8008,7 +8023,22 @@ var RecordingTriggersSchema = object({
 	* il livello: un contatto trovato già aperto al riavvio del runner non fa
 	* registrare.
 	*/
-	sensorDeviceIds: array(number().int().positive()).min(1).max(16).refine(noDuplicates, { message: "sensorDeviceIds must not repeat a device" }).optional()
+	sensorDeviceIds: array(number().int().positive()).min(1).max(16).refine(noDuplicates, { message: "sensorDeviceIds must not repeat a device" }).optional(),
+	/**
+	* La camera registra per tutta la durata del SEGNALE che lei stessa
+	* pubblica — la cap `recording-signal` (`active: true` mentre il device è in
+	* funzione: un robot che pulisce). È un LIVELLO, non un fronte: la finestra
+	* resta aperta finché il segnale è alto e si chiude `postBufferSec` dopo la
+	* caduta, così una pulizia di quaranta minuti è UNA clip.
+	*
+	* Non nomina un device: il segnale è della camera stessa, tenuto fresco dal
+	* suo provider (D224); il recorder lo ascolta su `DeviceStateChanged` e lo
+	* riconcilia leggendo la slice via RPC, con un tetto oltre il quale un
+	* segnale mai abbassato (un evento perso) non può tenere aperta una
+	* registrazione (D11). Vedi `recorder/addon/band-decision.ts`
+	* (`holdTrigger` / `releaseTrigger`).
+	*/
+	deviceSignal: boolean().optional()
 });
 /**
 * Mode of a single recording band — the recorder per-band vocabulary.
@@ -11523,6 +11553,8 @@ method(object({
 	label: string().optional(),
 	deviceFeatures: array(string()).optional(),
 	autoEligible: boolean().optional(),
+	/** The slot the publisher says this stream IS — see `CameraStreamSchema.profileHint`. */
+	profileHint: CamProfileSchema.optional(),
 	metadata: record(string(), unknown()).optional(),
 	/** Required when kind === 'derived' — the source camStreamId the
 	*  derived broker reads its encoded plane from.
@@ -27875,6 +27907,47 @@ method(object({
 	auth: "protected"
 });
 /**
+* A camera's own "record me NOW" LEVEL — a signal the device raises while
+* something it knows about is happening (a robot vacuum cleaning, a machine
+* running, a gate open) and lowers when it stops.
+*
+* It is a level, not an edge. The sensor triggers the recorder already listens
+* to (`SOURCE_CAP_ACTIVE_FIELD`) fire on a rising edge and record for a fixed
+* post-buffer; a cleaning lasts forty minutes, and forty minutes of "this is
+* still happening" cannot be expressed as an edge plus a post-buffer without
+* either re-triggering on a timer (polling — D224 forbids the consumer keeping
+* the fact fresh) or picking a post-buffer long enough to cover every job,
+* which records the dock for that long after every short one. So the recorder
+* reads the LEVEL: it records for as long as `active` is true, plus the band's
+* own post-buffer once it falls.
+*
+* Who owns the fact: the PROVIDER of the device, which already reads the state
+* the signal is derived from (the vacuum's lifecycle state, for Dreame). It
+* writes this slice on every change; consumers subscribe to the kernel's
+* `DeviceStateChanged` for it and read it back through
+* `deviceState.getCapSlice` to reconcile — never a second copy, never a poll
+* against the device (D224, D8/D11).
+*
+* Deliberately NOT a `binary` sensor on the camera: a binary sensor is exported
+* to Home Assistant, HomeKit and the sensor picker as a thing an operator can
+* bind, and "the camera wants to record" is not a room sensor. It is a fact
+* about the camera, on the camera.
+*/
+var RecordingSignalStatusSchema = object({
+	/** True while the device asks to be recorded. */
+	active: boolean(),
+	/**
+	* Why, in the provider's own vocabulary (a vacuum's `cleaning` / `docked`,
+	* …). Free text for the log line and the UI badge; the recorder never
+	* branches on it.
+	*/
+	reason: string(),
+	/** Ms epoch of the last `active` transition. 0 if never observed. */
+	lastChangedAt: number()
+});
+RecordingSignalStatusSchema.extend({ lastFetchedAt: number() });
+DeviceType.Camera, method(object({ deviceId: number() }), RecordingSignalStatusSchema);
+/**
 * scene-monitor — device-scoped reference-region state cap. An operator marks
 * a rect ROI on a camera frame and names one or more states; the engine
 * (pipeline-analytics, designated post-processing node) reports which state is
@@ -28247,6 +28320,8 @@ var CamStreamDescriptorSchema = object({
 	deviceFeatures: array(string()).optional(),
 	/** Eligible for automatic profile assignment. Absent = `true`. */
 	autoEligible: boolean().optional(),
+	/** The slot the publisher says this stream IS — see `CameraStreamSchema.profileHint`. */
+	profileHint: CamProfileSchema.optional(),
 	/** Transport-specific opaque metadata (e.g. rfc4571 SDP). */
 	metadata: record(string(), unknown()).optional()
 });
@@ -34192,6 +34267,12 @@ Object.freeze({
 		addonId: null,
 		access: "view"
 	},
+	"recordingSignal.getStatus": {
+		capName: "recording-signal",
+		capScope: "device",
+		addonId: null,
+		access: "view"
+	},
 	"sceneMonitor.captureReference": {
 		capName: "scene-monitor",
 		capScope: "device",
@@ -37184,6 +37265,11 @@ Object.freeze({
 		form: "single",
 		optional: true
 	}],
+	"recordingSignal.getStatus": [{
+		name: "deviceId",
+		form: "single",
+		optional: false
+	}],
 	"sceneMonitor.captureReference": [{
 		name: "deviceId",
 		form: "single",

package/dist/magic-link/auth-magic-link.addon.js

@@ -3,7 +3,7 @@ Object.defineProperties(exports, {
 	[Symbol.toStringTag]: { value: "Module" }
 });
 require("../chunk-Cek0wNdY.js");
-const require_dist = require("../dist-CuXyrGjy.js");
+const require_dist = require("../dist-B_kQwQY0.js");
 //#region src/magic-link/auth-magic-link.addon.ts
 /**
 * Magic-link authentication addon.

package/dist/magic-link/auth-magic-link.addon.mjs

@@ -1,4 +1,4 @@
-import { a as loginMethodCapability, c as BaseAddon, i as buildAddonRouteProvider, r as authProviderCapability, s as errMsg, t as addonRoutesCapability } from "../dist-1fcG0PiH.mjs";
+import { a as loginMethodCapability, c as BaseAddon, i as buildAddonRouteProvider, r as authProviderCapability, s as errMsg, t as addonRoutesCapability } from "../dist-Z61zMCWZ.mjs";
 //#region src/magic-link/auth-magic-link.addon.ts
 /**
 * Magic-link authentication addon.

package/dist/oidc/auth-oidc.addon.js

@@ -3,7 +3,7 @@ Object.defineProperties(exports, {
 	[Symbol.toStringTag]: { value: "Module" }
 });
 const require_chunk = require("../chunk-Cek0wNdY.js");
-const require_dist = require("../dist-CuXyrGjy.js");
+const require_dist = require("../dist-B_kQwQY0.js");
 let node_crypto = require("node:crypto");
 node_crypto = require_chunk.__toESM(node_crypto);
 //#region node_modules/jose/dist/webapi/lib/buffer_utils.js

package/dist/oidc/auth-oidc.addon.mjs

@@ -1,4 +1,4 @@
-import { a as loginMethodCapability, c as BaseAddon, i as buildAddonRouteProvider, r as authProviderCapability, s as errMsg, t as addonRoutesCapability } from "../dist-1fcG0PiH.mjs";
+import { a as loginMethodCapability, c as BaseAddon, i as buildAddonRouteProvider, r as authProviderCapability, s as errMsg, t as addonRoutesCapability } from "../dist-Z61zMCWZ.mjs";
 import * as crypto$1 from "node:crypto";
 //#region node_modules/jose/dist/webapi/lib/buffer_utils.js
 var encoder = new TextEncoder();

package/dist/webauthn/{_virtual_mf-localSharedImportMap___mfe_internal__addon_auth_webauthn_widgets-BoPzbyak.mjs → _virtual_mf-localSharedImportMap___mfe_internal__addon_auth_webauthn_widgets-8ljfNyNt.mjs}

@@ -3,7 +3,7 @@ import "./dist-CYZr2fwk.mjs";
 var e = {
 	"@camstack/sdk": {
 		name: "@camstack/sdk",
-		version: "1.2.75",
+		version: "1.2.76",
 		scope: ["default"],
 		loaded: !1,
 		from: "addon_auth_webauthn_widgets",
@@ -18,7 +18,7 @@ var e = {
 	},
 	"@camstack/types": {
 		name: "@camstack/types",
-		version: "1.2.155",
+		version: "1.2.156",
 		scope: ["default"],
 		loaded: !1,
 		from: "addon_auth_webauthn_widgets",
@@ -33,7 +33,7 @@ var e = {
 	},
 	"@camstack/ui-library": {
 		name: "@camstack/ui-library",
-		version: "1.2.122",
+		version: "1.2.123",
 		scope: ["default"],
 		loaded: !1,
 		from: "addon_auth_webauthn_widgets",

package/dist/webauthn/auth-webauthn.addon.js

@@ -3,7 +3,7 @@ Object.defineProperties(exports, {
 	[Symbol.toStringTag]: { value: "Module" }
 });
 const require_chunk = require("../chunk-Cek0wNdY.js");
-const require_dist = require("../dist-CuXyrGjy.js");
+const require_dist = require("../dist-B_kQwQY0.js");
 let stream = require("stream");
 stream = require_chunk.__toESM(stream, 1);
 let http = require("http");

package/dist/webauthn/auth-webauthn.addon.mjs

@@ -1,4 +1,4 @@
-import { a as loginMethodCapability, c as BaseAddon, d as number, f as object, l as array, n as addonWidgetsSourceCapability, o as userPasskeysCapability, p as string, u as boolean } from "../dist-1fcG0PiH.mjs";
+import { a as loginMethodCapability, c as BaseAddon, d as number, f as object, l as array, n as addonWidgetsSourceCapability, o as userPasskeysCapability, p as string, u as boolean } from "../dist-Z61zMCWZ.mjs";
 import { createRequire } from "node:module";
 import Stream from "stream";
 import http from "http";

package/dist/webauthn/{hostInit-9Be0I0r5.mjs → hostInit-CIi6EGuw.mjs}

@@ -36,7 +36,7 @@ async function r() {
 				}
 			},
 			"@camstack/types": {
-				version: "1.2.155",
+				version: "1.2.156",
 				scope: "default",
 				shareConfig: {
 					singleton: !0,
@@ -45,7 +45,7 @@ async function r() {
 				}
 			},
 			"@camstack/sdk": {
-				version: "1.2.75",
+				version: "1.2.76",
 				scope: "default",
 				shareConfig: {
 					singleton: !0,
@@ -81,7 +81,7 @@ async function r() {
 				}
 			},
 			"@camstack/ui-library": {
-				version: "1.2.122",
+				version: "1.2.123",
 				scope: "default",
 				shareConfig: {
 					singleton: !0,

package/dist/webauthn/remoteEntry.js

@@ -30,7 +30,7 @@ async function d(e) {
 	}
 }
 async function f() {
-	return l ||= d(() => import("./_virtual_mf-localSharedImportMap___mfe_internal__addon_auth_webauthn_widgets-BoPzbyak.mjs")).catch((e) => {
+	return l ||= d(() => import("./_virtual_mf-localSharedImportMap___mfe_internal__addon_auth_webauthn_widgets-8ljfNyNt.mjs")).catch((e) => {
 		throw l = void 0, e;
 	}), l;
 }

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@camstack/addon-auth",
-  "version": "1.2.78",
+  "version": "1.2.79",
   "description": "Authentication bundle — magic-link, OIDC, and WebAuthn/passkey. Multi-entry npm package shipping 3 addons under a single bundle; each addon keeps its own id, capabilities, and runner.",
   "keywords": [
     "camstack",