@callstack/apex 0.2.1 → 0.3.0

package/README.md

@@ -1,65 +1,232 @@
 # Apex CLI
 
-Configures the AI coding assistants installed on your machine to use
-[Callstack Apex](https://apex.callstack.com/) — an OpenAI-compatible endpoint
-serving the `callstack/Apex` model.
+Configures the AI coding assistants on your machine to use
+[Callstack Apex](https://apex.callstack.com/) (`callstack/Apex`).
 
-## Install
+`apex init` detects the assistants on your machine, lets you pick which ones to configure,
+shows every change it wants to make, and only then writes. Nothing changes until you say so.
 
-```sh
-curl -fsSL https://apex.callstack.ai/install.sh | sh
-```
-
-This checks for Node.js 18+ and then runs `npx @callstack/apex init` for you.
+## Install
 
-If you already have Node.js, you can skip the script entirely:
+Requires Node.js 22+ and npm. Nothing to install first:
 
 ```sh
 npx @callstack/apex init
 ```
 
-## What `init` does
+An npx run leaves no `apex` command behind, so after setup it offers to install the same version
+globally (`npm install -g @callstack/apex`), which is what makes `apex undo` and `apex run codex`
+work later; the rest of this README uses that short form. Say no, or run non-interactively, and
+every next step Apex CLI prints is spelled `npx @callstack/apex …` instead. Uninstalling does not
+undo your configs, so run `apex undo` first if you want them back.
 
-It detects which of these are installed and writes (or updates) their config
-to point at Apex, backing up any existing file first (`<file>.bak-<timestamp>`):
+## Commands
 
-| Assistant | Config written |
-| --- | --- |
-| Claude Code | `~/.claude/settings.json` |
-| Codex | `~/.codex/config.toml`, `~/.codex/callstack_ai.config.toml` |
-| OpenCode | `~/.config/opencode/opencode.json` (v1 or v2 format, auto-detected), `~/.local/share/opencode/auth.json` (if absent, v1 only) |
-| pi | `~/.pi/agent/models.json` |
-| Cursor | manual steps (GUI-only, printed to the terminal) |
-| VS Code + GitHub Copilot | manual steps (GUI-only, printed to the terminal) |
-| Vercel AI SDK / Eve | `.env` in the current project, if it depends on `ai`/`eve` |
+| Command | What it does | Writes by default? |
+| --- | --- | --- |
+| `apex detect [--json]` | Finds assistants on `PATH`, in config directories and in macOS `/Applications`; shows what would change | No, never |
+| `apex init` | Interactive setup: multiselect of detected assistants, colourised change preview, confirmation | Only after you confirm |
+| `apex init --no-interactive` | Prints the plan without asking questions | No |
+| `apex init --apply` | Writes the planned changes without asking | Yes |
+| `apex undo` | Reverts the most recent Apex CLI setup, with the same preview and confirmation | Only after you confirm |
+| `apex undo --list` | Shows recorded setups and which are already undone (`--json` prints the journal) | No |
+| `apex run <assistant> [-- <args>]` | Launches the assistant with the gateway, model and credentials in the child environment | No |
+| `apex completion <zsh\|bash\|fish>` | Prints a shell completion script | No |
 
-You'll be prompted for your Apex API key (input hidden), or pass it directly:
+Each command accepts only its own flags, and `--help` and the shell completions list exactly those:
 
-```sh
-npx @callstack/apex init --api-key sk-XXX
-# or
-APEX_API_KEY=sk-XXX npx @callstack/apex init --yes
-```
+| Command | Flags |
+| --- | --- |
+| `init` | `--assistants <ids>`, `--no-interactive`, `--apply`, `--no-diff`, `--json`, `--help` |
+| `detect` | `--json`, `--help` |
+| `undo` | `--no-interactive`, `--apply`, `--no-diff`, `--json`, `--list`, `--help` |
 
-Other flags: `--dry-run` (show changes without writing), `--only <ids>` /
-`--skip <ids>` (comma-separated, see `apex list` for ids).
+`apex init --wat` fails fast, and so does a flag in the wrong command
+(`apex detect --no-diff`). Only `--apply` writes, so there is no "preview *and* write" to argue
+about. `--assistants <ids>` is a comma list of `opencode`, `codex`,
+`claude`, `pi`, `cursor`, `copilot`, `ai-sdk`.
 
-## Commands
+Non-interactive callers (`--no-interactive`, `--json`, pipes, CI) never get a prompt and never
+have files changed unless they also pass `--apply`. `--json` prints a machine-readable plan with
+`mode`, `applied`, `appliedPaths`, per-file `changes` and `nextSteps` instead of the human UI. If a
+write fails halfway through a batch, the payload still reports what already landed plus the `error`,
+and the exit code is 1.
+
+### Shell completion
 
 ```sh
-apex init      # detect + configure
-apex list      # show which assistants are detected, without changing anything
+apex completion zsh  > "${fpath[1]}/_apex"                          # then rehash
+apex completion bash >> ~/.bashrc                                   # then source ~/.bashrc
+apex completion fish > ~/.config/fish/completions/apex.fish
 ```
 
-## Security
-
-Your Apex API key is written locally to config files under your home
-directory (and, for JS projects, to a local `.env`). Never commit these
-files or share the key. Rotate it if you suspect it leaked.
-
-## Local development
+## What a review looks like
 
-```sh
-npm link
-apex --help
 ```
+ ┌────────────────────────────────────────────────────────────────────────────┐
+ │ Apex CLI · Configure callstack/Apex for your favorite harness              │
+ │                                                                            │
+ │ Nothing is written until you confirm.                                      │
+ └────────────────────────────────────────────────────────────────────────────┘
+│
+◆  Set up callstack/Apex for which assistants?  (space toggles, enter confirms)
+│  OpenCode, Codex
+│
+◇  Set up callstack/Apex for which assistants?  (space toggles, enter confirms)
+│  OpenCode, Codex
+
+
+   Planned changes:
+
+   Update     ~/.config/opencode/opencode.json
+   --- ~/.config/opencode/opencode.json
+   +++ ~/.config/opencode/opencode.json
+   @@ -1,4 +1,19 @@
+    {
+      // keep this comment
+   -  "theme": "dark"
+   +  "theme": "dark",
+   +  "provider": {
+   +    "callstack.ai": { … }
+   +  }
+    }
+
+   Create     ~/.codex/callstack_ai.config.toml
+   --- /dev/null
+   +++ ~/.codex/callstack_ai.config.toml
+   @@ -0,0 +1,10 @@
+   +model_provider = "callstack_ai"
+
+   Existing files get a .apex-backup-<id> copy first.        (dimmed)
+│
+◇  Apply these changes?
+   ✔ ~/.config/opencode/opencode.json backup: opencode.json.apex-backup-b4c42657
+
+
+   Environment
+
+   ✓ CALLSTACK_AUTH_TOKEN is set in this shell
+   Apex CLI never reads, stores or logs the key itself.
+
+
+   Use these commands to run callstack/Apex with your selected harnesses:
+
+   apex run opencode  opencode --model callstack.ai/callstack/Apex        (dimmed)
+   apex run codex     codex --profile callstack_ai
+
+   ...or pick "callstack/Apex" from the UI when setting up manually.
+   For more instructions, visit:
+   https://app.notion.com/p/callstack/Apex-how-to-use-it-36d5d027c0f880e99d03d1c37a77382f
+
+   If you want to undo the changes, run apex undo
+```
+`Environment` only shows the `export CALLSTACK_AUTH_TOKEN=…` line while the variable is missing; once
+it is set you get a green `✓ CALLSTACK_AUTH_TOKEN is set in this shell` instead. The closing block shows
+what each `apex run` expands to, links the guide (the URL is never folded, so it stays clickable), and
+mentions `apex undo` only when something was actually written.
+
+The diff is the change list: it only shows the lines that actually move, paths are shortened to
+`~/…`, and values under keys like `apiKey`, `token` or `secret` are redacted, so a preview can be
+pasted into a ticket safely. A file Apex CLI created diffs from `/dev/null`, and one it is deleting
+diffs to `/dev/null`. `--no-diff` swaps the diff for one `+ key  value` row per setting.
+
+## Reversing changes
+
+`apex undo` re-applies the inverse of the last setup, named by the time it ran: files Apex CLI
+created are deleted, files it edited go back to their pre-setup bytes. It only touches a file whose current content still hashes
+to what Apex CLI wrote; anything you edited afterwards is left alone and reported. A setup whose
+remaining files can only be left alone does not block the older ones: the next `apex undo` moves on
+to the most recent setup that still has something to restore. Restores create
+their own backup first, so an undo is itself reversible. Apex CLI records each batch in
+`$APEX_STATE_DIR/journal.json` (default `~/.local/state/apex/journal.json`, mode `0600`); the last
+20 batches are kept. Deleting the journal only forgets the history, it never changes a config.
+
+## Integrations
+
+| Assistant | Configuration | Behavior |
+| --- | --- | --- |
+| OpenCode | `~/.config/opencode/opencode.json` or `.jsonc` | Adds `provider.callstack.ai`, OpenAI-compatible transport, model and environment-key reference; preserves the default model. A config already in OpenCode 2's `providers` format gets the v2 entry instead, and you add the key with `/connect`. |
+| Codex 0.134.0+ | `~/.codex/callstack_ai.config.toml` | Adds a self-contained Responses API provider/profile; leaves base config and default model untouched. |
+| Claude Code | `~/.claude/settings.json` | Merges attribution flag only; use `apex run claude` for gateway credentials and model selection. |
+| Pi | `~/.pi/agent/models.json` | Adds `providers.callstack` with Chat Completions, Apex and `$CALLSTACK_AUTH_TOKEN`; preserves other models. Requires a Pi version supporting `$VAR` key interpolation. |
+| Cursor | Guided setup | Prints endpoint, API-key and custom-model steps; does not modify private editor storage. |
+| VS Code / Copilot | Guided setup | Detects VS Code, not whether Copilot is installed; prints custom-endpoint steps and model JSON, retaining the editor-generated secret reference. |
+| Vercel AI SDK / Eve | Guided setup | Detected from the `package.json` in the directory you run Apex CLI from (`ai`, `@ai-sdk/openai` or `eve`); prints the connector snippet, which reads the key from `CALLSTACK_AUTH_TOKEN`, and the Eve context-window setting. Nothing is written into the project. |
+
+OpenCode, Pi, Codex and the Copilot model JSON also declare what Apex can do, in each tool's own
+fields: a 262,144-token context window, 16,384 output tokens, tool calling, image input, and the
+`none`/`low`/`medium`/`xhigh` reasoning efforts (default `medium`). Cursor and Claude Code have no
+such fields for a custom model.
+
+Respects `XDG_CONFIG_HOME`, `CODEX_HOME`, `CLAUDE_CONFIG_DIR`, `PI_CODING_AGENT_DIR`,
+`XDG_STATE_HOME`/`APEX_STATE_DIR`, and Windows `APPDATA`. Project-specific settings and custom
+`OPENCODE_CONFIG` files are not modified and may override global configuration. A new OpenCode
+config is written in the v1 format, which OpenCode 2 also reads. Older Codex
+releases using inline `[profiles]` need a manual migration or a newer Codex release.
+
+Windows: file configuration supports Windows paths, but `apex run` refuses `.cmd`/`.bat` shims to
+avoid shell interpolation; launch the configured assistant directly or use WSL.
+
+## Authentication
+
+Provide `CALLSTACK_AUTH_TOKEN` through your shell or a secret manager. Apex CLI never prompts for,
+logs, stores or validates the key, and never writes it to a config file; configs only reference it.
+A hidden prompt keeps it out of your shell history:
+
+```bash
+read -r -s -p 'Callstack API key: ' CALLSTACK_AUTH_TOKEN; echo
+export CALLSTACK_AUTH_TOKEN
+apex run codex
+```
+
+Other launchers: `apex run opencode`, `apex run claude`, `apex run pi`, `apex run codex -- --help`.
+Launchers pass extra arguments through unchanged (without a shell), can be overridden by explicit
+user arguments, and never run `init`. `apex run claude` sets the gateway URL, token, attribution
+flag and model aliases in the child process only, leaving your default Claude provider alone.
+
+## Safety and recovery
+
+Apex CLI will not break what you already have.
+
+- It shows every change first, and writes nothing until you say yes. If you script it, only
+  `--apply` writes.
+- It copies a file next to itself before it edits that file, so you can always put the old one back.
+- It keeps your comments, your other settings, and your default model.
+- It never asks for your API key, writes it down, or sends it anywhere. You keep it in
+  `CALLSTACK_AUTH_TOKEN`, and the CLI prints `<redacted>` wherever a secret would show.
+- If a config file is broken, set up another way, or a link to somewhere else, Apex CLI stops and
+  tells you. It does not overwrite it.
+- `apex undo` gives your old setup back. It only touches files that still match what Apex CLI wrote.
+
+How that works underneath:
+
+- Previews print paths and key/value changes, never secrets.
+- All selected configurations are parsed before any write. Malformed files, conflicting Codex
+  profile keys and symlinked files or directories are refused, and one bad assistant blocks the
+  whole batch instead of half-applying it.
+- JSON/JSONC edits preserve comments and unrelated keys. The Callstack endpoint is set to the
+  documented one. A key the assistant already has (in OpenCode's own key store, or in Pi's
+  `models.json`, where Apex CLI 0.2 put them) is kept, so upgrading never leaves an assistant
+  without a key; otherwise the config references `CALLSTACK_AUTH_TOKEN`.
+- Writes use same-directory temporary files plus rename with mode `0600` (new directories `0700`),
+  and abort if the file changed on disk between planning and saving. This is not a lock or a
+  multi-file transaction: a later I/O failure can leave earlier writes applied. `apex undo`
+  cleans that up.
+- Backups and newly created files are printed with every save. To recover by hand, close the
+  assistant and restore the printed `*.apex-backup-<id>` file over its config after reviewing any
+  intervening edits. Backups can contain previous secrets.
+- No shell startup file is ever edited. The CLI makes no API requests and cannot verify your
+  key or gateway access; launch a configured assistant to test the connection.
+
+## Configuration references
+
+- Official Codex advanced configuration: `https://developers.openai.com/codex/config-advanced/`
+  (separate profile files for 0.134.0+; provider is placed in that profile).
+- OpenCode v1 configuration: `https://dev.opencode.ai/docs/config/`
+  (JSONC and `{env:VARIABLE}` support).
+- Pi custom models: `https://github.com/badlogic/pi-mono/blob/main/packages/coding-agent/docs/models.md`
+  (`$VARIABLE` key interpolation; bare uppercase names are literals in current docs).
+
+## Contributing
+
+See [CONTRIBUTING.md](CONTRIBUTING.md).

package/bin/apex.js

@@ -1,4 +1,13 @@
 #!/usr/bin/env node
-'use strict';
+import { existsSync } from 'node:fs';
+import { dirname, join } from 'node:path';
+import { fileURLToPath, pathToFileURL } from 'node:url';
 
-require('../src/cli.js').main(process.argv.slice(2));
+const dist = join(dirname(fileURLToPath(import.meta.url)), '..', 'dist', 'cli.js');
+
+if (!existsSync(dist)) {
+  process.stderr.write('Missing dist/cli.js bundle. Run `npm run build` first.\n');
+  process.exit(1);
+}
+
+await import(pathToFileURL(dist).href);