@byteluck-fe/model-driven-shared 6.2.0-1-beta.13 → 6.2.0-1-beta.16

package/dist/esm/locales/zh-CN.json

@@ -1,241 +1,241 @@
-{
-  "isNotNumber": "请输入一个数字",
-  "isNotString": "请输入一个字符串",
-  "isNotObject": "请输入一个对象",
-  "isNotArray": "请输入一个数组",
-  "isNotBoolean": "请输入一个布尔",
-  "runtimeRequired": "{caption}必填",
-  "pleaseEnterCaption": "请输入标题",
-  "pleaseEnterCaptionTip": "请输入气泡提示语",
-  "pleaseEnterRowCaption": "请输入行标题",
-  "pleaseEnterPlaceholder": "请输入提示文字",
-  "pleaseEnterFieldCode": "请绑定数据项",
-  "pleaseEnterForm": "请绑定表单",
-  "pleaseEnterList": "请绑定列表",
-  "pleaseEnterProcess": "请绑定流程",
-  "pleaseEnterLabel": "请输入显示值",
-  "pleaseEnterValue": "请输入存储值",
-  "bizKeyNotBindFiled": "单据编号未绑定数据项",
-  "pleaseSelectOneField": "请至少选择一个显示字段！",
-  "pleaseEnterNumberRange": "请输入大于等于{min}且小于等于{max}的数值",
-  "pleaseEnterAValueGreaterThanMin": "请输入大于等于{min}的数值",
-  "pleaseEnterAValueLessThanMax": "请输入小于等于{max}的数值",
-  "numberRangeSetError": "数值范围设置有误",
-  "stringRangeError": "请输入长度大于等于{min}且小于等于{max}的值",
-  "attachmentMaxSize": "附件大小必须在0MB至1000MB之间",
-  "pleaseEnterTotalScoreSetting": "请填写总分设置",
-  "theTotalScoreMustNotBeLessThan1": "总分不能小于1",
-  "scoreDefaultValueRange": "默认值必须在{min}和{max}之间",
-  "attachmentLimitError": "附件上传的数量超过了限制",
-  "PleaseReselectTheOptionalQuantity": "请重新选择可选数量",
-  "TheMaximumLengthIsGreaterThanTheMinimumLength": "该控件最大长度需大于最小长度",
-  "TheMinimumLengthIsGreaterThanTheMaximumLength": "该控件最小长度需小于最大长度",
-  "PleaseSelectTheCorrectOptionSettings": "请选择正确的选项设置",
-  "optionIdIsRepeat": "选项ID不能重复",
-  "optionIsRequired": "请输入至少一条选项",
-  "pleaseEnterDataCode": "请绑定业务模型",
-  "pleaseEnterValueFieldCode": "请绑定存储值",
-  "pleaseEnterSvcCode": "请绑定服务",
-  "pleaseBindAtLeastOneDisplayValue": "至少绑定一个显示值",
-  "pleaseSelectProvince": "请选择省",
-  "pleaseSelectCity": "请选择市",
-  "pleaseSelectDistrict": "请选择区",
-  "limitRowsCannotBeLessThan0": "最少填写行数不能小于0",
-  "TheNumberOfRowsCannotBeLessThanMinRows": "行数量不能小于{min}行",
-  "pleaseEnterColumnWidth": "请输入列宽",
-  "pleaseSetTheLogicalRelationshipOfAllRuleConditions": "请设置所有规则条件的逻辑关系",
-  "pleaseCompleteAllRulesAndConditions": "请将所有规则条件填写完整",
-  "pleaseSelectControl": "请选择控件",
-  "pleaseSelectAtLeastOneColumn": "请至少选择一个显示字段",
-  "pleaseSelectFillBackMode": "请选择回填设置",
-  "pleaseSelectDashboard": "请选择仪表盘",
-  "rootNodeIsRequired": "请选择根节点",
-  "theViewNameCannotBeEmpty": "视图名称不能为空",
-  "pleaseSelectOcrType": "请选择识别类型",
-  "pleaseSelectAtLeastOneFieldToFillIn": "请至少选择一个字段进行填充",
-  "pleaseChooseAtLeastOne": "请至少选择一个",
-  "pleaseEnterButtonContent": "请输入按钮标题",
-  "pleaseEnterDataCodeInDataSetting": "请在数据设置中绑定业务模型",
-  "pleaseEnterValueFieldCodeInDataSetting": "请在数据设置中绑定存储值",
-  "pleaseEnterSvcCodeInDataSetting": "请在数据设置中绑定服务",
-  "pleaseBindAtLeastOneDisplayValueInDataSetting": "请在数据设置中至少绑定一个显示值",
-  "rootNodeIsRequiredInDataSetting": "请在数据设置中选择根节点",
-  "pleaseEnterMaxHeight": "请输入最大高度",
-  "pleaseEnterWatermark": "水印不能为空",
-  "pleaseEnterFileName": "文件名称不能为空",
-  "pleaseUploadAtLeastOnePrintTemplate": "请至少上传一个打印模版！",
-  "pleaseAssignBusiness": "请选择指定业务部门",
-  "pleaseAssignExternal": "请选择指定外部组织",
-  "pleaseEnterAliasCode": "请输入子表别名",
-  "pleaseSelectDataCode": "请选择关联表设置业务模型",
-  "pleaseSelectSvcCode": "请选择关联表设置绑定服务",
-  "pleaseSelectJoinFieldCode": "请选择关联子表字段",
-  "pleaseSelectMainFieldCode": "请选择关联主表字段",
-  "pleaseSelectSortFieldCode": "请选择排序字段",
-  "batchDeleteButton": "批量删除",
-  "batchPrintListButton": "批量打印",
-  "batchPrintRecordList": "批量打印记录",
-  "button": "按钮",
-  "createFormListButton": "创建单据",
-  "dashboard": "仪表盘",
-  "divider": "分割线",
-  "exportListButton": "导出",
-  "formSelectButton": "表单操作",
-  "importRecordListButton": "导入",
-  "invoiceCheckButton": "发票识别",
-  "link": "链接",
-  "listSelectButton": "列表选择",
-  "ListViewSelect": "列表视图",
-  "operationButton": "操作按钮",
-  "pagination": "分页",
-  "submissionRecordListButton": "批量提交记录",
-  "text": "说明文字",
-  "textOcrButton": "文字识别",
-  "title": "标题组件",
-  "approvalStatusColumn": "当前审批状态",
-  "array": "数组",
-  "autoNumber": "自动编号",
-  "custom": "自定义",
-  "decimal": "数值",
-  "department": "部门",
-  "employee": "人员",
-  "file": "附件",
-  "image": "图片",
-  "location": "地址",
-  "operation": "操作",
-  "order": "序号",
-  "people": "人员",
-  "long": "长文本",
-  "timescope": "日期区间",
-  "timestamp": "日期",
-  "varchar": "短文本",
-  "gridLayoutWrap": "换行容器Wrap",
-  "gridTable": "表格",
-  "subTable": "明细子表",
-  "address": "地址",
-  "amount": "金额",
-  "calc": "计算公式",
-  "checkBox": "多选",
-  "electronicSignature": "电子签章",
-  "input": "单行文本",
-  "number": "数字",
-  "organizationSelection": "业务组织",
-  "radio": "单选",
-  "richText": "富文本",
-  "score": "评分",
-  "searchNumberRange": "数字区间",
-  "select": "下拉单选",
-  "selectMultiple": "下拉多选",
-  "selectRelation": "关联单选",
-  "textarea": "多行文本",
-  "tree": "树",
-  "vueFormItem": "Vue容器",
-  "vuePage": "Vue页面",
-  "WPS": "在线文档",
-  "actionBar": "按钮操作栏",
-  "advancedContainer": "高级容器",
-  "cardGroup": "分组",
-  "col": "栅格列",
-  "dataView": "数据容器",
-  "grid": "画布",
-  "gridLayoutContainer": "换行容器",
-  "gridRow": "栅格等分行",
-  "listView": "列表容器",
-  "page": "自由页面",
-  "position": "定位子容器",
-  "positioningContainer": "定位容器",
-  "row": "栅格布局",
-  "subtableColumn": "明细子表单元格",
-  "subtableRow": "明细子表行",
-  "tab": "标签页",
-  "tabPane": "标签单元",
-  "toolbox": "工具栏",
-  "batchSubmissionListButton": "批量提交",
-  "exportRecordListButton": "导出记录",
-  "listViewSelect": "列表视图",
-  "endTime": "结束时间",
-  "startTime": "开始时间",
-  "unit": "单位",
-  "result": "结果",
-  "currency": "币种",
-  "endDate": "结束日期",
-  "startDate": "开始日期",
-  "pleaseSelectCompanyName": "请选择公司名称",
-  "pleaseSelectPhoneOrEmail": "请选择手机号/邮箱",
-  "pleaseSelectSignType": "请选择签章类型",
-  "pleaseSelectSigner": "请选择签署人",
-  "pleaseSelectOnlyOne": "至少需要一个签署人",
-  "pleaseSelectSignFile": "请选择签署文件",
-  "pleaseSelect": "请选择",
-  "pleaseSelectOrg": "请选择组织",
-  "pleaseSelectDept": "请选择部门",
-  "pleaseSelectEndDate": "请选择结束日期",
-  "pleaseSelectStartDate": "请选择开始日期",
-  "pleaseChooseAddress": "请选择地址",
-  "modalConfirm": "弹窗确认时",
-  "tabChange": "标签页切换时",
-  "rowSelected": "行选中时",
-  "listDataImport": "列表数据导入前",
-  "rowDelete": "行删除前",
-  "rowClick": "行点击时",
-  "cellRender": "操作列渲染时",
-  "onClickBtn": "点击操作按钮时",
-  "rename": "重命名时",
-  "onSaveFile": "保存文件时",
-  "onOpenFile": "打开文件时",
-  "onFocus": "获取焦点时",
-  "onBlur": "失去焦点时",
-  "onInput": "用户输入时",
-  "listDataAdd": "列表数据插入前",
-  "listDataDelete": "列表数据删除时",
-  "listDataBack": "列表数据返回时",
-  "listDataCreate": "列表数据查询构建时",
-  "listDataChange": "列表数据变化时",
-  "search": "搜索时",
-  "valueChange": "值发生变化时",
-  "finished": "执行完成时",
-  "click": "点击时",
-  "pleaseEnterNameorEmail": "请输入人员姓名或邮箱",
-  "pleaseEnterDate": "请输入日期",
-  "pleaseEnterAutonumber": "请输入自动编号",
-  "pleaseEnter": "请输入",
-  "defaultTemplate": "默认模版",
-  "left": "左右布局",
-  "top": "上下布局",
-  "default": "普通",
-  "readonly": "只读",
-  "required": "必填",
-  "textTip": "提示文字",
-  "hideCaption": "隐藏标题",
-  "titleRequired": "标题必填",
-  "organizationalForm": "组织形态",
-  "businessType": "业务类型",
-  "deleteConfirm": "确定要删除此条数据吗？",
-  "hide": "隐藏",
-  "processStatus": "流程状态",
-  "approvedDocuments": "审批通过单据",
-  "delete": "删除",
-  "edit": "编辑",
-  "view": "查看",
-  "loadCtrlErrorTip": "加载自定义控件异常，会影响到的控件：{id}",
-  "loadCtrlError": "内置组件加载错误",
-  "fullLine": "充满整行",
-  "min": "最小值",
-  "max": "最大值",
-  "createWPS": "新建文档",
-  "reset": "重置",
-  "query": "查询",
-  "detailed": "明细",
-  "print": "打印",
-  "draft": "保存草稿",
-  "save": "保存",
-  "cancel": "取消",
-  "uploadImg": "上传图片",
-  "signature": "发起签署",
-  "uploadFile": "上传附件",
-  "linkContent": "我是一个链接",
-  "referenceList":"引用列表",
-  "optionOne":"选项一",
-  "optionTwo":"选项二",
-  "optionThird":"选项三"
-}
+{
+  "isNotNumber": "请输入一个数字",
+  "isNotString": "请输入一个字符串",
+  "isNotObject": "请输入一个对象",
+  "isNotArray": "请输入一个数组",
+  "isNotBoolean": "请输入一个布尔",
+  "runtimeRequired": "{caption}必填",
+  "pleaseEnterCaption": "请输入标题",
+  "pleaseEnterCaptionTip": "请输入气泡提示语",
+  "pleaseEnterRowCaption": "请输入行标题",
+  "pleaseEnterPlaceholder": "请输入提示文字",
+  "pleaseEnterFieldCode": "请绑定数据项",
+  "pleaseEnterForm": "请绑定表单",
+  "pleaseEnterList": "请绑定列表",
+  "pleaseEnterProcess": "请绑定流程",
+  "pleaseEnterLabel": "请输入显示值",
+  "pleaseEnterValue": "请输入存储值",
+  "bizKeyNotBindFiled": "单据编号未绑定数据项",
+  "pleaseSelectOneField": "请至少选择一个显示字段！",
+  "pleaseEnterNumberRange": "请输入大于等于{min}且小于等于{max}的数值",
+  "pleaseEnterAValueGreaterThanMin": "请输入大于等于{min}的数值",
+  "pleaseEnterAValueLessThanMax": "请输入小于等于{max}的数值",
+  "numberRangeSetError": "数值范围设置有误",
+  "stringRangeError": "请输入长度大于等于{min}且小于等于{max}的值",
+  "attachmentMaxSize": "附件大小必须在0MB至1000MB之间",
+  "pleaseEnterTotalScoreSetting": "请填写总分设置",
+  "theTotalScoreMustNotBeLessThan1": "总分不能小于1",
+  "scoreDefaultValueRange": "默认值必须在{min}和{max}之间",
+  "attachmentLimitError": "附件上传的数量超过了限制",
+  "PleaseReselectTheOptionalQuantity": "请重新选择可选数量",
+  "TheMaximumLengthIsGreaterThanTheMinimumLength": "该控件最大长度需大于最小长度",
+  "TheMinimumLengthIsGreaterThanTheMaximumLength": "该控件最小长度需小于最大长度",
+  "PleaseSelectTheCorrectOptionSettings": "请选择正确的选项设置",
+  "optionIdIsRepeat": "选项ID不能重复",
+  "optionIsRequired": "请输入至少一条选项",
+  "pleaseEnterDataCode": "请绑定业务模型",
+  "pleaseEnterValueFieldCode": "请绑定存储值",
+  "pleaseEnterSvcCode": "请绑定服务",
+  "pleaseBindAtLeastOneDisplayValue": "至少绑定一个显示值",
+  "pleaseSelectProvince": "请选择省",
+  "pleaseSelectCity": "请选择市",
+  "pleaseSelectDistrict": "请选择区",
+  "limitRowsCannotBeLessThan0": "最少填写行数不能小于0",
+  "TheNumberOfRowsCannotBeLessThanMinRows": "行数量不能小于{min}行",
+  "pleaseEnterColumnWidth": "请输入列宽",
+  "pleaseSetTheLogicalRelationshipOfAllRuleConditions": "请设置所有规则条件的逻辑关系",
+  "pleaseCompleteAllRulesAndConditions": "请将所有规则条件填写完整",
+  "pleaseSelectControl": "请选择控件",
+  "pleaseSelectAtLeastOneColumn": "请至少选择一个显示字段",
+  "pleaseSelectFillBackMode": "请选择回填设置",
+  "pleaseSelectDashboard": "请选择仪表盘",
+  "rootNodeIsRequired": "请选择根节点",
+  "theViewNameCannotBeEmpty": "视图名称不能为空",
+  "pleaseSelectOcrType": "请选择识别类型",
+  "pleaseSelectAtLeastOneFieldToFillIn": "请至少选择一个字段进行填充",
+  "pleaseChooseAtLeastOne": "请至少选择一个",
+  "pleaseEnterButtonContent": "请输入按钮标题",
+  "pleaseEnterDataCodeInDataSetting": "请在数据设置中绑定业务模型",
+  "pleaseEnterValueFieldCodeInDataSetting": "请在数据设置中绑定存储值",
+  "pleaseEnterSvcCodeInDataSetting": "请在数据设置中绑定服务",
+  "pleaseBindAtLeastOneDisplayValueInDataSetting": "请在数据设置中至少绑定一个显示值",
+  "rootNodeIsRequiredInDataSetting": "请在数据设置中选择根节点",
+  "pleaseEnterMaxHeight": "请输入最大高度",
+  "pleaseEnterWatermark": "水印不能为空",
+  "pleaseEnterFileName": "文件名称不能为空",
+  "pleaseUploadAtLeastOnePrintTemplate": "请至少上传一个打印模版！",
+  "pleaseAssignBusiness": "请选择指定业务部门",
+  "pleaseAssignExternal": "请选择指定外部组织",
+  "pleaseEnterAliasCode": "请输入子表别名",
+  "pleaseSelectDataCode": "请选择关联表设置业务模型",
+  "pleaseSelectSvcCode": "请选择关联表设置绑定服务",
+  "pleaseSelectJoinFieldCode": "请选择关联子表字段",
+  "pleaseSelectMainFieldCode": "请选择关联主表字段",
+  "pleaseSelectSortFieldCode": "请选择排序字段",
+  "batchDeleteButton": "批量删除",
+  "batchPrintListButton": "批量打印",
+  "batchPrintRecordList": "批量打印记录",
+  "button": "按钮",
+  "createFormListButton": "创建单据",
+  "dashboard": "仪表盘",
+  "divider": "分割线",
+  "exportListButton": "导出",
+  "formSelectButton": "表单操作",
+  "importRecordListButton": "导入",
+  "invoiceCheckButton": "发票识别",
+  "link": "链接",
+  "listSelectButton": "列表选择",
+  "ListViewSelect": "列表视图",
+  "operationButton": "操作按钮",
+  "pagination": "分页",
+  "submissionRecordListButton": "批量提交记录",
+  "text": "说明文字",
+  "textOcrButton": "文字识别",
+  "title": "标题组件",
+  "approvalStatusColumn": "当前审批状态",
+  "array": "数组",
+  "autoNumber": "自动编号",
+  "custom": "自定义",
+  "decimal": "数值",
+  "department": "部门",
+  "employee": "人员",
+  "file": "附件",
+  "image": "图片",
+  "location": "地址",
+  "operation": "操作",
+  "order": "序号",
+  "people": "人员",
+  "long": "长文本",
+  "timescope": "日期区间",
+  "timestamp": "日期",
+  "varchar": "短文本",
+  "gridLayoutWrap": "换行容器Wrap",
+  "gridTable": "表格",
+  "subTable": "明细子表",
+  "address": "地址",
+  "amount": "金额",
+  "calc": "计算公式",
+  "checkBox": "多选",
+  "electronicSignature": "电子签章",
+  "input": "单行文本",
+  "number": "数字",
+  "organizationSelection": "业务组织",
+  "radio": "单选",
+  "richText": "富文本",
+  "score": "评分",
+  "searchNumberRange": "数字区间",
+  "select": "下拉单选",
+  "selectMultiple": "下拉多选",
+  "selectRelation": "关联单选",
+  "textarea": "多行文本",
+  "tree": "树",
+  "vueFormItem": "Vue容器",
+  "vuePage": "Vue页面",
+  "WPS": "在线文档",
+  "actionBar": "按钮操作栏",
+  "advancedContainer": "高级容器",
+  "cardGroup": "分组",
+  "col": "栅格列",
+  "dataView": "数据容器",
+  "grid": "画布",
+  "gridLayoutContainer": "换行容器",
+  "gridRow": "栅格等分行",
+  "listView": "列表容器",
+  "page": "自由页面",
+  "position": "定位子容器",
+  "positioningContainer": "定位容器",
+  "row": "栅格布局",
+  "subtableColumn": "明细子表单元格",
+  "subtableRow": "明细子表行",
+  "tab": "标签页",
+  "tabPane": "标签单元",
+  "toolbox": "工具栏",
+  "batchSubmissionListButton": "批量提交",
+  "exportRecordListButton": "导出记录",
+  "listViewSelect": "列表视图",
+  "endTime": "结束时间",
+  "startTime": "开始时间",
+  "unit": "单位",
+  "result": "结果",
+  "currency": "币种",
+  "endDate": "结束日期",
+  "startDate": "开始日期",
+  "pleaseSelectCompanyName": "请选择公司名称",
+  "pleaseSelectPhoneOrEmail": "请选择手机号/邮箱",
+  "pleaseSelectSignType": "请选择签章类型",
+  "pleaseSelectSigner": "请选择签署人",
+  "pleaseSelectOnlyOne": "至少需要一个签署人",
+  "pleaseSelectSignFile": "请选择签署文件",
+  "pleaseSelect": "请选择",
+  "pleaseSelectOrg": "请选择组织",
+  "pleaseSelectDept": "请选择部门",
+  "pleaseSelectEndDate": "请选择结束日期",
+  "pleaseSelectStartDate": "请选择开始日期",
+  "pleaseChooseAddress": "请选择地址",
+  "modalConfirm": "弹窗确认时",
+  "tabChange": "标签页切换时",
+  "rowSelected": "行选中时",
+  "listDataImport": "列表数据导入前",
+  "rowDelete": "行删除前",
+  "rowClick": "行点击时",
+  "cellRender": "操作列渲染时",
+  "onClickBtn": "点击操作按钮时",
+  "rename": "重命名时",
+  "onSaveFile": "保存文件时",
+  "onOpenFile": "打开文件时",
+  "onFocus": "获取焦点时",
+  "onBlur": "失去焦点时",
+  "onInput": "用户输入时",
+  "listDataAdd": "列表数据插入前",
+  "listDataDelete": "列表数据删除时",
+  "listDataBack": "列表数据返回时",
+  "listDataCreate": "列表数据查询构建时",
+  "listDataChange": "列表数据变化时",
+  "search": "搜索时",
+  "valueChange": "值发生变化时",
+  "finished": "执行完成时",
+  "click": "点击时",
+  "pleaseEnterNameorEmail": "请输入人员姓名或邮箱",
+  "pleaseEnterDate": "请输入日期",
+  "pleaseEnterAutonumber": "请输入自动编号",
+  "pleaseEnter": "请输入",
+  "defaultTemplate": "默认模版",
+  "left": "左右布局",
+  "top": "上下布局",
+  "default": "普通",
+  "readonly": "只读",
+  "required": "必填",
+  "textTip": "提示文字",
+  "hideCaption": "隐藏标题",
+  "titleRequired": "标题必填",
+  "organizationalForm": "组织形态",
+  "businessType": "业务类型",
+  "deleteConfirm": "确定要删除此条数据吗？",
+  "hide": "隐藏",
+  "processStatus": "流程状态",
+  "approvedDocuments": "审批通过单据",
+  "delete": "删除",
+  "edit": "编辑",
+  "view": "查看",
+  "loadCtrlErrorTip": "加载自定义控件异常，会影响到的控件：{id}",
+  "loadCtrlError": "内置组件加载错误",
+  "fullLine": "充满整行",
+  "min": "最小值",
+  "max": "最大值",
+  "createWPS": "新建文档",
+  "reset": "重置",
+  "query": "查询",
+  "detailed": "明细",
+  "print": "打印",
+  "draft": "保存草稿",
+  "save": "保存",
+  "cancel": "取消",
+  "uploadImg": "上传图片",
+  "signature": "发起签署",
+  "uploadFile": "上传附件",
+  "linkContent": "我是一个链接",
+  "referenceList":"引用列表",
+  "optionOne":"选项一",
+  "optionTwo":"选项二",
+  "optionThird":"选项三"
+}

package/dist/esm/updateValueFromKeys.js

@@ -1,10 +1,10 @@
 import { warn } from './log';
-/**
- * 通过key字符串类修改对象上边的属性
- * @param obj 执行修改的对象
- * @param key 修改的key,可以是 name,可以是0,可以是深层嵌套的obj.0,obj[0].name等等
- * @param value 修改的值
- * @return boolean 是否修改成功
+/**
+ * 通过key字符串类修改对象上边的属性
+ * @param obj 执行修改的对象
+ * @param key 修改的key,可以是 name,可以是0,可以是深层嵌套的obj.0,obj[0].name等等
+ * @param value 修改的值
+ * @return boolean 是否修改成功
  * */ export function updateValueFromKeys(obj, key, value) {
     // 'obj[0].name' 会被转换为 obj.0.name 然后变成  ['obj', 0, 'name']数组，最终匹配内容
     var keyList = key.replace(/\[(\d)]/g, function(text, $1) {

package/dist/esm/utils.js

@@ -94,16 +94,16 @@ export function wait() {
         setTimeout(resolve, time);
     });
 }
-/**
- * schema逐个遍历，提供转换回调
- * @author qiyu
- * @param schemaItems
- * @param convertion
- * @example
- import { loop, camelizeKeys } from 'model-driven-front/lib/utils/dataCleaner'
- new_model = loop(new_model, (item: any) => {
-     return camelizeKeys(item)
-   })
+/**
+ * schema逐个遍历，提供转换回调
+ * @author qiyu
+ * @param schemaItems
+ * @param convertion
+ * @example
+ import { loop, camelizeKeys } from 'model-driven-front/lib/utils/dataCleaner'
+ new_model = loop(new_model, (item: any) => {
+     return camelizeKeys(item)
+   })
  */ export function loop(schemaItems, convertion) {
     var new_items = [];
     if (Array.isArray(schemaItems)) {