@blueyerobotics/protocol-definitions 3.2.0-b032513b → 3.2.0-b371a87f

package/dist/message_formats.d.ts

@@ -154,6 +154,22 @@ export declare enum NotificationLevel {
 }
 export declare function notificationLevelFromJSON(object: any): NotificationLevel;
 export declare function notificationLevelToJSON(object: NotificationLevel): string;
+/**
+ * Storage location.
+ *
+ * Used to specify which storage location to use for recording photos and videos.
+ */
+export declare enum StorageLocation {
+    /** STORAGE_LOCATION_UNSPECIFIED - Unspecified. */
+    STORAGE_LOCATION_UNSPECIFIED = 0,
+    /** STORAGE_LOCATION_INTERNAL - Internal storage of the drone. */
+    STORAGE_LOCATION_INTERNAL = 1,
+    /** STORAGE_LOCATION_REMOVABLE - Removable storage device. */
+    STORAGE_LOCATION_REMOVABLE = 2,
+    UNRECOGNIZED = -1
+}
+export declare function storageLocationFromJSON(object: any): StorageLocation;
+export declare function storageLocationToJSON(object: StorageLocation): string;
 /** Drone models produced by Blueye. */
 export declare enum Model {
     /** MODEL_UNSPECIFIED - ModelName not specified. */
@@ -168,6 +184,8 @@ export declare enum Model {
     MODEL_X3 = 3,
     /** MODEL_X3_ULTRA - Blueye X3 Ultra. */
     MODEL_X3_ULTRA = 6,
+    /** MODEL_X7 - Blueye X7. */
+    MODEL_X7 = 7,
     /** MODEL_NEXT - Blueye ? */
     MODEL_NEXT = 5,
     UNRECOGNIZED = -1
@@ -194,24 +212,35 @@ export declare function pressureSensorTypeToJSON(object: PressureSensorType): st
 export declare enum Resolution {
     /** RESOLUTION_UNSPECIFIED - Resolution not specified. */
     RESOLUTION_UNSPECIFIED = 0,
-    /** RESOLUTION_FULLHD_1080P - 1080p Full HD resolution. */
-    RESOLUTION_FULLHD_1080P = 1,
-    /** RESOLUTION_HD_720P - 720p HD resolution. */
+    /** RESOLUTION_VGA_480P - VGA (640x480). */
+    RESOLUTION_VGA_480P = 4,
+    /** RESOLUTION_HD_720P - 720p HD (1280x720). */
     RESOLUTION_HD_720P = 2,
-    /** RESOLUTION_UHD_4K - 4K Ultra HD resolution. */
+    /** RESOLUTION_FULLHD_1080P - 1080p Full HD (1920x1080). */
+    RESOLUTION_FULLHD_1080P = 1,
+    /** RESOLUTION_UHD_4K - 4K Ultra HD (3840x2160, Only supported on X3 Ultra). */
     RESOLUTION_UHD_4K = 3,
+    /** RESOLUTION_QHD_2K - 2K QHD (2560x1440, Only supported on X3 Ultra). */
+    RESOLUTION_QHD_2K = 5,
     UNRECOGNIZED = -1
 }
 export declare function resolutionFromJSON(object: any): Resolution;
 export declare function resolutionToJSON(object: Resolution): string;
-/** Available camera frame rates. */
+/**
+ * Available camera frame rates.
+ *
+ * If the requested frame rate is higher than what is supported at the current resolution,
+ * the frame rate will be reduced while the resolution is respected.
+ */
 export declare enum Framerate {
     /** FRAMERATE_UNSPECIFIED - Framerate not specified. */
     FRAMERATE_UNSPECIFIED = 0,
     /** FRAMERATE_FPS_30 - 30 frames per second. */
     FRAMERATE_FPS_30 = 1,
-    /** FRAMERATE_FPS_25 - 25 frames per second. */
+    /** FRAMERATE_FPS_25 - 25 frames per second. (Only supported on Pioneer/Pro/X1/X3) */
     FRAMERATE_FPS_25 = 2,
+    /** FRAMERATE_FPS_60 - 60 frames per second. (Only supported on X3 Ultra at QHD, 1080p and 720p) */
+    FRAMERATE_FPS_60 = 3,
     UNRECOGNIZED = -1
 }
 export declare function framerateFromJSON(object: any): Framerate;
@@ -228,6 +257,17 @@ export declare enum Camera {
 }
 export declare function cameraFromJSON(object: any): Camera;
 export declare function cameraToJSON(object: Camera): string;
+export declare enum StreamingProtocol {
+    /** STREAMING_PROTOCOL_UNSPECIFIED - Streaming protocol not specified. */
+    STREAMING_PROTOCOL_UNSPECIFIED = 0,
+    /** STREAMING_PROTOCOL_RTSP_H264 - RTSP streaming protocol using H264 codec. */
+    STREAMING_PROTOCOL_RTSP_H264 = 1,
+    /** STREAMING_PROTOCOL_RTSP_MJPEG - RTSP streaming protocol using MJPEG codec. No recording when activated. */
+    STREAMING_PROTOCOL_RTSP_MJPEG = 2,
+    UNRECOGNIZED = -1
+}
+export declare function streamingProtocolFromJSON(object: any): StreamingProtocol;
+export declare function streamingProtocolToJSON(object: StreamingProtocol): string;
 /** Available temperature units. */
 export declare enum TemperatureUnit {
     /** TEMPERATURE_UNIT_UNSPECIFIED - Temperature unit not specified. */
@@ -390,8 +430,12 @@ export declare enum GuestPortDeviceID {
     GUEST_PORT_DEVICE_ID_WATERLINKED_SONAR_3D15 = 43,
     /** GUEST_PORT_DEVICE_ID_CERULEAN_TRACKER_650 - Cerulean Tracker 650. */
     GUEST_PORT_DEVICE_ID_CERULEAN_TRACKER_650 = 44,
-    /** GUEST_PORT_DEVICE_ID_BLUEYE_EXTERNAL_USB_STORAGE - Blueye External USB Storage */
+    /** GUEST_PORT_DEVICE_ID_BLUEYE_EXTERNAL_USB_STORAGE - Blueye External USB Storage. */
     GUEST_PORT_DEVICE_ID_BLUEYE_EXTERNAL_USB_STORAGE = 45,
+    /** GUEST_PORT_DEVICE_ID_BLUEYE_MULTIBEAM_SERVO_V2 - Blueye Multibeam Skid Servo V2. */
+    GUEST_PORT_DEVICE_ID_BLUEYE_MULTIBEAM_SERVO_V2 = 46,
+    /** GUEST_PORT_DEVICE_ID_CERULEAN_OMNISCAN_450_COMPACT - Cerulean Omniscan 450 Compact. */
+    GUEST_PORT_DEVICE_ID_CERULEAN_OMNISCAN_450_COMPACT = 47,
     UNRECOGNIZED = -1
 }
 export declare function guestPortDeviceIDFromJSON(object: any): GuestPortDeviceID;
@@ -533,6 +577,49 @@ export declare enum LogEntry_LogLevel {
 }
 export declare function logEntry_LogLevelFromJSON(object: any): LogEntry_LogLevel;
 export declare function logEntry_LogLevelToJSON(object: LogEntry_LogLevel): string;
+export interface KernelLogEntry {
+    /** Log level, info, warning, error, etc. */
+    level: KernelLogEntry_KernelLogLevel;
+    /** Sequence number of the log entry. */
+    seqnum: number;
+    /** Timestamp of the log entry. */
+    timestamp: Date | undefined;
+    /** Log messages. */
+    messages: string[];
+    /** List of key-value pairs. */
+    fields: KernelLogEntry_KeyValuePair[];
+}
+/** Kernel log level. */
+export declare enum KernelLogEntry_KernelLogLevel {
+    /** KERNEL_LOG_LEVEL_UNSPECIFIED - Unspecified log level. */
+    KERNEL_LOG_LEVEL_UNSPECIFIED = 0,
+    /** KERNEL_LOG_LEVEL_EMERG - Emergency log level. */
+    KERNEL_LOG_LEVEL_EMERG = 1,
+    /** KERNEL_LOG_LEVEL_ALERT - Alert log level. */
+    KERNEL_LOG_LEVEL_ALERT = 2,
+    /** KERNEL_LOG_LEVEL_CRIT - Critical log level. */
+    KERNEL_LOG_LEVEL_CRIT = 3,
+    /** KERNEL_LOG_LEVEL_ERR - Error log level. */
+    KERNEL_LOG_LEVEL_ERR = 4,
+    /** KERNEL_LOG_LEVEL_WARNING - Warning log level. */
+    KERNEL_LOG_LEVEL_WARNING = 5,
+    /** KERNEL_LOG_LEVEL_NOTICE - Notice log level. */
+    KERNEL_LOG_LEVEL_NOTICE = 6,
+    /** KERNEL_LOG_LEVEL_INFO - Informational log level. */
+    KERNEL_LOG_LEVEL_INFO = 7,
+    /** KERNEL_LOG_LEVEL_DEBUG - Debug log level. */
+    KERNEL_LOG_LEVEL_DEBUG = 8,
+    UNRECOGNIZED = -1
+}
+export declare function kernelLogEntry_KernelLogLevelFromJSON(object: any): KernelLogEntry_KernelLogLevel;
+export declare function kernelLogEntry_KernelLogLevelToJSON(object: KernelLogEntry_KernelLogLevel): string;
+/** Key-value pair used for structured logging. */
+export interface KernelLogEntry_KeyValuePair {
+    /** Key of the key-value pair. */
+    key: string;
+    /** Value of the key-value pair. */
+    value: string;
+}
 /** If you use both values at the same time they cancel each other out. */
 export interface MotionInput {
     /** Forward (positive) and backwards (negative) movement. (-1..1). */
@@ -702,6 +789,12 @@ export interface RecordState {
     multibeamSeconds: number;
     /** Multibeam record fps. */
     multibeamFps: number;
+    /** Storage location used for main camera recording. */
+    mainStorageLocation: StorageLocation;
+    /** Storage location used for guestport camera recording. */
+    guestportStorageLocation: StorageLocation;
+    /** Storage location used for multibeam recording. */
+    multibeamStorageLocation: StorageLocation;
 }
 /** Time-lapse state published if time-lapse mission is running. */
 export interface TimeLapseState {
@@ -1169,7 +1262,7 @@ export interface DiveTime {
     /** Number of seconds the drone has been submerged. */
     value: number;
 }
-/** Which cameras are supposed to be recording. */
+/** Which cameras or multibeam are supposed to be recording. */
 export interface RecordOn {
     /** Record the main camera. */
     main: boolean;
@@ -1195,6 +1288,8 @@ export interface StoragePartition {
     devicePath: string;
     /** Mount path of the partition. */
     mountPath: string;
+    /** Label of the partition. */
+    label: string;
 }
 /** Removable storage device. */
 export interface RemovableStorageDevice {
@@ -1217,10 +1312,12 @@ export declare enum RemovableStorageDevice_Status {
     STATUS_UNSPECIFIED = 0,
     /** STATUS_READY - The storage device is valid and ready for use. */
     STATUS_READY = 1,
-    /** STATUS_FORMATTING - The storage device is being formatted */
+    /** STATUS_FORMATTING - The storage device is being formatted. */
     STATUS_FORMATTING = 2,
     /** STATUS_ERROR - The storage device is in an error state. */
     STATUS_ERROR = 3,
+    /** STATUS_UNPLUGGED - The storage device is not present. */
+    STATUS_UNPLUGGED = 4,
     UNRECOGNIZED = -1
 }
 export declare function removableStorageDevice_StatusFromJSON(object: any): RemovableStorageDevice_Status;
@@ -1449,22 +1546,50 @@ export interface CameraParameters {
     mjpgBitrate: number;
     /** Shutter speed  (1/10000 * s), -1 for automatic exposure. */
     exposure: number;
-    /** White balance temperature (2800..9300), -1 for automatic white balance. */
+    /** White balance temp (Pioneer/Pro/X1/X3: 2800..9300, Ultra: 2300..15000), -1 for auto. */
     whiteBalance: number;
-    /** Hue (-40..40), 0 as default. */
+    /** Hue (-40..40), 0 as default. Only available on Pioneer/Pro/X1/X3. */
     hue: number;
-    /** Iso gain (0..1). */
+    /** Iso gain (0..1). Only available on Pioneer/Pro/X1/X3. */
     gain: number;
+    /** Brightness (-10..10), 0 as default. Only available on Ultra */
+    brightness: number;
+    /** Contrast (-50..50), 0 as default. Only available on Ultra. */
+    contrast: number;
+    /** Saturation (0..50), 8 as default. Only available on Ultra. */
+    saturation: number;
+    /** Gamma (4..79), 22 as default. Only available on Ultra. */
+    gamma: number;
+    /** Sharpness (-20..20), -20 as default. Only available on Ultra. */
+    sharpness: number;
+    /** Backlight compensation (-150..150), 10 as default. Only available on Ultra. */
+    backlightCompensation: number;
+    /** Noise reduction (-20..20), -20 as default. Only available on Ultra. */
+    denoise: number;
+    /** Enable eHDR mode. Default true. Only available on Ultra. */
+    ehdrEnabled: boolean;
+    /** Minimum number of eHDR frames. (1..4), default 1. Only available on Ultra. */
+    ehdrExposureMinNumber: number;
+    /** Maximum number of eHDR frames. (1..4), default 2. Only on Ultra. Setting larger than 2 can reduce the framerate. */
+    ehdrExposureMaxNumber: number;
     /** Stream, recording and image resolution (deprecated). */
     resolution: Resolution;
     /** Stream resolution. */
     streamResolution: Resolution;
     /** Recording and image resolution. */
     recordingResolution: Resolution;
+    /** Streaming protocol. */
+    streamingProtocol: StreamingProtocol;
     /** Stream and recording framerate. */
     framerate: Framerate;
     /** Which camera the parameters belong to. */
     camera: Camera;
+    /**
+     * Network MTU (Maximum Transmission Unit) size for video streaming in bytes (68..65535).
+     * If 0 or unset, the system will use a default of 1400.
+     * The Blueye App allows users to set values between 500 and 1460.
+     */
+    mtuSize: number;
 }
 /**
  * Overlay parameters.
@@ -1690,8 +1815,7 @@ export interface MultibeamPing {
     /** Size in bytes of each row in the ping data image. */
     step: number;
     /**
-     * Bearing angle of each column of the sonar data
-     * (in 100th of a degree, multiply by 0.01 to get a value in degrees).
+     * Bearing angle of each column of the sonar data in degrees.
      * The sonar image is not sampled uniformly in the bearing direction.
      */
     bearings: number[];
@@ -1847,8 +1971,61 @@ export interface CPUInfo {
     /** Communication queue load (0..1). */
     commQueueLoad: number;
 }
+/**
+ * Surface Unit battery information.
+ *
+ * This message is published by the Surface Unit, and re-published by
+ * the drone over the communication protocol.
+ */
+export interface SurfaceUnitBatteryInfo {
+    /** Battery charge status. */
+    status: SurfaceUnitBatteryInfo_ChargeStatus;
+    /** Battery level (0..1). */
+    level: number;
+}
+export declare enum SurfaceUnitBatteryInfo_ChargeStatus {
+    CHARGE_STATUS_UNSPECIFIED = 0,
+    CHARGE_STATUS_DISCHARGE = 1,
+    CHARGE_STATUS_CHARGE = 2,
+    CHARGE_STATUS_CHARGE_ERROR = 3,
+    UNRECOGNIZED = -1
+}
+export declare function surfaceUnitBatteryInfo_ChargeStatusFromJSON(object: any): SurfaceUnitBatteryInfo_ChargeStatus;
+export declare function surfaceUnitBatteryInfo_ChargeStatusToJSON(object: SurfaceUnitBatteryInfo_ChargeStatus): string;
+/**
+ * Surface Unit version information.
+ *
+ * This message is published by the Surface Unit, and re-published by
+ * the drone over the communication protocol.
+ */
+export interface SurfaceUnitVersionInfo {
+    /** Surface Unit firmware version (x.y.z). */
+    version: string;
+}
+/** Generic filter settings. */
+export interface FilterMessage {
+    /** If the filter is enabled. */
+    enabled: boolean;
+    /** Intensity of the filter (0..1). */
+    intensity: number;
+}
+/**
+ * Digital pan, tilt, and zoom state for the main camera.
+ *
+ * Only supported on X3 Ultra. Controls digital (not mechanical) zoom.
+ */
+export interface CameraPanTiltZoom {
+    /** Horizontal pan (-1.0..1.0), where 0.0 is center. */
+    pan: number;
+    /** Vertical tilt (-1.0..1.0), where 0.0 is center. */
+    tilt: number;
+    /** Zoom level (0.0..1.0), where 0.0 is no zoom and 1.0 is maximum zoom. */
+    zoom: number;
+}
 export declare const BinlogRecord: MessageFns<BinlogRecord>;
 export declare const LogEntry: MessageFns<LogEntry>;
+export declare const KernelLogEntry: MessageFns<KernelLogEntry>;
+export declare const KernelLogEntry_KeyValuePair: MessageFns<KernelLogEntry_KeyValuePair>;
 export declare const MotionInput: MessageFns<MotionInput>;
 export declare const Lights: MessageFns<Lights>;
 export declare const Laser: MessageFns<Laser>;
@@ -1934,6 +2111,10 @@ export declare const MultibeamFrameOffset: MessageFns<MultibeamFrameOffset>;
 export declare const MutltibeamRecordingIndex: MessageFns<MutltibeamRecordingIndex>;
 export declare const PersistentStorageSettings: MessageFns<PersistentStorageSettings>;
 export declare const CPUInfo: MessageFns<CPUInfo>;
+export declare const SurfaceUnitBatteryInfo: MessageFns<SurfaceUnitBatteryInfo>;
+export declare const SurfaceUnitVersionInfo: MessageFns<SurfaceUnitVersionInfo>;
+export declare const FilterMessage: MessageFns<FilterMessage>;
+export declare const CameraPanTiltZoom: MessageFns<CameraPanTiltZoom>;
 type Builtin = Date | Function | Uint8Array | string | number | boolean | undefined;
 type DeepPartial<T> = T extends Builtin ? T : T extends globalThis.Array<infer U> ? globalThis.Array<DeepPartial<U>> : T extends ReadonlyArray<infer U> ? ReadonlyArray<DeepPartial<U>> : T extends {} ? {
     [K in keyof T]?: DeepPartial<T[K]>;