@blockcast/mmt-container 0.3.0 → 0.4.0-main.1cd3cdea89da

package/node_modules/@blockcast/mmt-fec/node_modules/@blockcast/mmt-base/src/net-constants.ts

@@ -1,17 +0,0 @@
-/**
- * AMT well-known UDP port (RFC 7450 §4).
- *
- * The single definition for the whole repo. It lives here, in the one package
- * both `@blockcast/mmt-transport` and `@blockcast/mmt-container` already
- * depend on, because the two apply it on opposite sides of a boundary that
- * does not otherwise share code:
- *
- * - container resolves it where `networkSource` semantics live, so a catalog
- *   relay that names no port is reachable instead of handing a join a
- *   portless relay that fails.
- * - transport applies it when reading a catalog, dialling a gateway, and
- *   answering DRIAD — but deliberately not at every boundary. Which call
- *   sites do and do not take the default is transport's business; the
- *   reasoning lives beside those call sites, not here.
- */
-export const DEFAULT_AMT_RELAY_PORT = 2268;

package/node_modules/@blockcast/mmt-fec/node_modules/@blockcast/mmt-base/src/ntp-short.ts

@@ -1,67 +0,0 @@
-/**
- * NTP short format (RFC 5905 §6): an unsigned 32-bit, 16.16 fixed-point count
- * of seconds. The MMTP header `timestamp` field (ISO/IEC 23008-1 §9.2.2)
- * carries each packet's UTC sending instant in this format, so the value wraps
- * to 0 every 2^16 s (~18.2 h).
- *
- * Plain numeric order on these values breaks at every wrap: a retained
- * `Math.max` stays at the pre-wrap value and every later instant compares as
- * older. Order send times only with {@link compareNtpShort}, which applies
- * RFC 1982 serial-number arithmetic over the field's width.
- */
-
-/** Width in bits of the MMTP `timestamp` field (NTP short). */
-export const NTP_SHORT_BITS = 32
-
-/** Number of distinct NTP-short values; the field wraps to 0 here. */
-export const NTP_SHORT_MODULUS = 2 ** NTP_SHORT_BITS
-
-/**
- * RFC 1982 §3.2's `2^(SERIAL_BITS - 1)`. Two values whose forward distance is
- * below this are ordered; exactly this far apart they are not ordered at all.
- * Two instants must be less than this far apart (2^15 s, ~9.1 h of send time)
- * for the comparison to give their true order.
- */
-export const NTP_SHORT_HALF_RANGE = 2 ** (NTP_SHORT_BITS - 1)
-
-/**
- * Serial order of one NTP-short value relative to another.
- *
- * `'unordered'` is RFC 1982's undefined case: the values are exactly
- * {@link NTP_SHORT_HALF_RANGE} apart, so neither precedes the other. It is
- * never folded into `'before'` or `'after'`; each caller decides what an
- * unorderable pair means for it.
- */
-export type NtpShortOrder = 'before' | 'equal' | 'after' | 'unordered'
-
-/** True when `value` is an NTP-short value: an integer in [0, NTP_SHORT_MODULUS). */
-export function isNtpShort(value: number): boolean {
-  return Number.isInteger(value) && value >= 0 && value < NTP_SHORT_MODULUS
-}
-
-/**
- * RFC 1982 serial comparison of NTP-short `a` against `b`: `'after'` when `a`
- * is the later instant, `'before'` when it is the earlier one.
- *
- * The answer is the true order only while the two instants are less than
- * {@link NTP_SHORT_HALF_RANGE} apart. Past that a 32-bit field cannot tell
- * later from earlier, and the result names whichever direction is nearer.
- * This is not a total order (it is not transitive across the whole space), so
- * it must never be used to sort.
- *
- * @throws {RangeError} if either operand is not an NTP-short value
- */
-export function compareNtpShort(a: number, b: number): NtpShortOrder {
-  if (!isNtpShort(a) || !isNtpShort(b)) {
-    throw new RangeError(
-      `NTP-short values must be integers in [0, 2^${NTP_SHORT_BITS}), got ${String(a)} and ${String(b)}`,
-    )
-  }
-  if (a === b) return 'equal'
-  // Forward distance from b to a, reduced into [1, NTP_SHORT_MODULUS). Both
-  // operands are below 2^32, so every step is exact in a double.
-  const forward = (a - b + NTP_SHORT_MODULUS) % NTP_SHORT_MODULUS
-  if (forward < NTP_SHORT_HALF_RANGE) return 'after'
-  if (forward > NTP_SHORT_HALF_RANGE) return 'before'
-  return 'unordered'
-}

package/node_modules/@blockcast/mmt-fec/node_modules/@blockcast/mmt-base/src/serial-number.ts

@@ -1,107 +0,0 @@
-/**
- * RFC 1982 serial-number arithmetic for the 32-bit MMTP AL-FEC symbol
- * counters (ISO/IEC 23008-1:2023 C.5.2 SS_ID, C.5.3 SS_Start).
- *
- * SS_ID is a 32-bit field, so a stream that runs long enough wraps it to 0.
- * Ordering two SS_IDs (or two blocks by their first SS_ID) with `<` reads
- * every post-wrap value as older than every pre-wrap one. Serial order
- * agrees with `<` whenever the two values are less than 2^31 apart, so for
- * every stream that has not reached the wrap the result is unchanged; only
- * the order across the wrap point differs (BLO-35597 iso:5).
- */
-
-/** 2^SERIAL_BITS for SERIAL_BITS = 32. */
-export const SERIAL32_SPAN = 0x1_0000_0000
-
-/** RFC 1982 §3.2's 2^(SERIAL_BITS - 1). */
-export const SERIAL32_HALF = 0x8000_0000
-
-function assertUint32(value: number, name: string): void {
-  if (!Number.isInteger(value) || value < 0 || value >= SERIAL32_SPAN) {
-    throw new RangeError(`${name} must be a uint32 (got ${value})`)
-  }
-}
-
-/**
- * RFC 1982 §3.1 addition, extended to negative `n` for the matching
- * subtraction: `(s + n) mod 2^32`. `n` must lie in (-2^31, 2^31).
- */
-export function serial32Add(s: number, n: number): number {
-  assertUint32(s, 's')
-  if (!Number.isInteger(n) || n <= -SERIAL32_HALF || n >= SERIAL32_HALF) {
-    throw new RangeError(`serial addend must lie in (-2^31, 2^31) (got ${n})`)
-  }
-  return (s + n + SERIAL32_SPAN) % SERIAL32_SPAN
-}
-
-/** Forward distance from `from` to `to`: `(to - from) mod 2^32`. */
-export function serial32Distance(from: number, to: number): number {
-  return (to - from) >>> 0
-}
-
-/**
- * RFC 1982 §3.2: `a` precedes `b`. Values exactly 2^31 apart are unordered
- * (neither precedes the other).
- */
-export function serial32Precedes(a: number, b: number): boolean {
-  const distance = serial32Distance(a, b)
-  return distance !== 0 && distance < SERIAL32_HALF
-}
-
-/**
- * First SS_ID of block `sbn` under the K-stride numbering every current
- * sender uses (`SS_ID = SBN * K + ESI`, C.5.2), reduced mod 2^32.
- */
-export function kStrideBlockStart(sbn: number, k: number): number {
-  assertUint32(sbn, 'sbn')
-  if (!Number.isInteger(k) || k < 1 || k >= SERIAL32_HALF) {
-    throw new RangeError(`k must be a positive integer below 2^31 (got ${k})`)
-  }
-  // sbn < 2^32 and k < 2^31 keep the product below 2^63, but a double is
-  // exact only to 2^53; split the product so every step is exact.
-  const high = Math.floor(sbn / 0x1_0000) // < 2^16
-  const low = sbn % 0x1_0000              // < 2^16
-  return (((high * k) % SERIAL32_SPAN) * 0x1_0000 + low * k) % SERIAL32_SPAN
-}
-
-/**
- * Whether block `a` precedes block `b`, ordering the blocks by their first
- * SS_ID in serial arithmetic. Identical to `a < b` for any two blocks of a
- * stream that has not wrapped SS_ID.
- */
-export function kStrideBlockPrecedes(a: number, b: number, k: number): boolean {
-  return serial32Precedes(kStrideBlockStart(a, k), kStrideBlockStart(b, k))
-}
-
-/**
- * How many blocks `a` lies behind `b`: 0 when `a` does not precede `b`,
- * otherwise `ceil(distance / K)` over the SS_ID distance between their first
- * symbols. Without a wrap that is exactly `b - a`; across the wrap the one
- * short pre-wrap block (2^32 mod K symbols) still counts as one block.
- */
-export function kStrideBlocksBehind(a: number, b: number, k: number): number {
-  const from = kStrideBlockStart(a, k)
-  const to = kStrideBlockStart(b, k)
-  if (!serial32Precedes(from, to)) return 0
-  return Math.ceil(serial32Distance(from, to) / k)
-}
-
-/**
- * Whether `sbn` and `k` describe a block of the K-stride numbering:
- * `sbn` a uint32, `k` an integer in 1..2^31-1.
- */
-export function isKStrideBlock(sbn: number, k: number): boolean {
-  return Number.isInteger(sbn) && sbn >= 0 && sbn < SERIAL32_SPAN &&
-    Number.isInteger(k) && k >= 1 && k < SERIAL32_HALF
-}
-
-/**
- * The block after `sbn`: `sbn + 1`, or 0 once `(sbn + 1) * K` reaches 2^32
- * and the next SS_ID wraps (C.5.2). There are `ceil(2^32 / K)` blocks per
- * wrap, the last of them short when K does not divide 2^32.
- */
-export function kStrideNextBlock(sbn: number, k: number): number {
-  assertUint32(sbn, 'sbn')
-  kStrideBlockStart(sbn, k) // validates k
-  return (sbn + 1) * k >= SERIAL32_SPAN ? 0 : sbn + 1
-}