@blamejs/pki 0.8.1 → 0.8.2

package/CHANGELOG.md

@@ -4,6 +4,31 @@ All notable changes to `@blamejs/pki` are documented here. The format
 follows [Keep a Changelog](https://keepachangelog.com/en/1.1.0/); this
 project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+## v0.8.2 — 2026-09-25
+
+A distinguished name can be read back from its string form, and twelve attributes the name table published can finally be encoded.
+
+### Added
+
+- `pki.x509.parseDn(dn)` reads a distinguished-name string into `{ rdns, dn, bytes }`, using the attribute names and value escaping of RFC 4514 sections 2.4 and 3, including the `#`-prefixed hex form for a value whose ASN.1 type has no string form. `bytes` is raw `Name` DER, the form `spec.subject` and `spec.issuer` already take, so a name read from text can be signed without rebuilding it. Components are read in the order they are written, which is the order every `dn` here is emitted in and the order `openssl x509 -subject` prints; RFC 4514 section 2.1 specifies the opposite order, so a string from a directory tool that follows it names the components from last to first. Malformed input throws `x509/bad-dn`.
+- Twelve distinguished-name attributes are registered: `initials`, `generationQualifier`, `distinguishedNameQualifier`, `pseudonym`, `userId`, `businessCategory`, `postalCode`, `name`, `organizationIdentifier`, and the three CA/Browser Forum jurisdiction attributes. Each already had a short name in `pki.C.NAMES.DN_SHORT`, and `pki.oid.byName` returned undefined for all twelve, so `pki.x509.sign` refused a subject naming any of them.
+
+### Changed
+
+- The `dn` string of a name carrying one of those twelve attributes now labels it by name rather than by dotted OID, so a subject that read `2.5.4.15=Private Organization` reads `businessCategory=Private Organization`. The encoded certificate is unaffected; this is the rendered string, which `pki.inspect` and the `lint` findings also show.
+
+### Fixed
+
+- A string value beginning with U+FEFF keeps it. Reading a `UTF8String` went through a decoder that treats a leading U+FEFF as a byte-order mark and removes it, so the decoded value differed from the bytes that encoded it and two certificates whose subjects differed only by that character produced names that compared equal. X.690 gives U+FEFF no special meaning inside a string, and the same correction applies to the deterministic CBOR reader and the shared text decoder behind the protocol clients.
+- A `#`-prefixed attribute value is held to everything the plain string form is held to. It carries the value's own DER, so it previously bypassed the attribute's string type, its alphabet, its size bounds and the non-empty rule; a `countryName` of five characters, a `serialNumber` containing an underscore and an empty `commonName` could each be encoded that way and produced a name whose own emitted string would not parse. The supplied DER must now be the string type the attribute's module entry names, and its content is held to the same checks.
+- Four distinguished-name attributes are encoded with the ASN.1 string type their profile gives them, rather than as `UTF8String`: `domainComponent` and `emailAddress` as `IA5String`, and `distinguishedNameQualifier`, `serialNumber`, `countryName` and `jurisdictionCountryName` as `PrintableString`, the last two bounded to the two characters of a country code. A certificate carrying a `DC=` or `SERIALNUMBER=` component was non-conforming, and the alphabet each type restricts a value to was not applied, so a value those types cannot hold was accepted and encoded anyway. The size bounds the same module states are enforced with them: a `serialNumber` of 1 to 64 characters, an `emailAddress` of 1 to 255. Certificates already issued are unaffected; this changes the bytes newly issued ones carry.
+- `pki.x509.sign` accepts an attribute value in the two forms a parsed name hands back. A value whose type has no string form comes back as `#` followed by the hex of its DER, and a literal value beginning with `#` or a backslash comes back with a leading backslash; both were encoded as those literal characters instead of being read, so a name taken out of one certificate could not be written into another unchanged.
+
+### Documentation
+
+- Every obsoleted standards citation in README.md, ROADMAP.md and SECURITY.md names its successor beside it, so a reader is not sent to a number that is no longer current for its subject. Among them: RFC 4210 and RFC 9480 for CMP, now RFC 9810 and RFC 9811; RFC 5272, RFC 5273, RFC 5274 and RFC 6402 for CMC, now RFC 10002, RFC 10003 and RFC 10004; RFC 5019 for the lightweight OCSP profile, now RFC 9919; RFC 9579 for PBMAC1, now RFC 9879; RFC 8398 and RFC 8399 for internationalized names, now RFC 9598 and RFC 9549; RFC 2875 for Diffie-Hellman proof of possession, now RFC 6955; and RFC 8446 for TLS 1.3, now RFC 9846.
+- The roadmap's vulnerability table gains the CVE-2020-0601 row for the class refused at key import since 0.8.0, and states where the named-curve identifiers come from: RFC 5480 section 2.1.1.1 and RFC 5639 section 4.1, rather than the TLS cipher-suite document previously cited.
+
 ## v0.8.1 — 2026-09-19
 
 CMS gains its last RFC 5652 content type, and the OID registry names every curve a certificate can declare.

package/README.md

@@ -206,7 +206,7 @@ comment blocks, is at [pkijs.com](https://pkijs.com).
 | `pki.cbor` | Strict, bounded deterministic CBOR codec (RFC 8949). `decode` returns a zero-copy node tree, plus `read.*` typed leaf readers including the keyed lookup `read.mapGet` (text or COSE-label integer key, with the map's major type asserted in the accessor). Fail-closed on every non-canonical shape: indefinite length, non-minimal argument, unsorted or duplicate map keys, non-shortest float, trailing bytes |
 | `pki.oid` | Two-way OID ↔ name registry, seeded with RFC 5280 and the NIST PQC arcs — `name`, `byName`, `register`, `toArcs`/`fromArcs`, `toDER`/`fromDER`, and the `isDottedDecimal` string predicate |
 | `pki.webcrypto` | A W3C `SubtleCrypto` engine over `node:crypto` — `sign`/`verify`/`encrypt`/`decrypt`/`deriveBits`/`digest`/`generateKey`/`importKey`/`exportKey` across RSA, ECDSA, ECDH, Ed25519/Ed448, AES, HMAC, HKDF, PBKDF2 and SHA, plus post-quantum ML-DSA-44/65/87, SLH-DSA, and ML-KEM-512/768/1024 key generation with certificate and PKCS#8 import. The RFC 9935 seed / expandedKey / both private-key CHOICE is validated fail-closed, so an OpenSSL-legacy bare seed or an internally inconsistent key is rejected with a typed error. `encapsulateBits` and `decapsulateBits` are the ML-KEM key-establishment pair the CMS `KEMRecipientInfo` arm rides on, with the FIPS 203 §7.3 ciphertext-length check enforced here so a direct caller inherits it. Cross-implementation use is undefined in the specification, so a `CryptoKey` from a different WebCrypto implementation is refused here with a typed fault naming its origin; the `pki.*` verbs adopt such a key instead, whether it came from the platform or from a separately installed copy of this toolkit |
-| `pki.tls` | RFC 8879 certificate compression and the RFC 8446 §4.4.2 Certificate message it carries, which is the handshake's largest payload. `decompressCertificate` decodes a `CompressedCertificate` and returns the algorithm, the declared uncompressed length, the recovered message raw, and its per-entry certificate DER. Decompression carries the two-sided bound §5 requires: capped at the message's own declared length so a bomb is refused mid-stream, then compared to that declaration exactly, which catches the under-length direction a cap alone cannot see. An algorithm outside the RFC 8879 registry, one the runtime cannot decompress, or one the receiver never advertised is refused before any decompressor is handed the bytes; an empty compressed body is a framing violation (`tls/bad-framing`); and trailing bytes, after the message or after the compressed frame, are refused (`tls/trailing-data`), so one chain has exactly one encoding. `compressCertificate` is the inverse and round-trips its own output before returning. `parseCertificateMessage` decodes the RFC 8446 §4.4.2 message on its own, surfacing each entry's certificate DER ready for `pki.schema.x509.parse` alongside its raw extensions; a separate extension negotiates `certificate_type`, so it is declared, never guessed. All three registered algorithms (zlib, brotli, zstd) are implemented, each offered only where the running Node decompresses it safely — one whose decompressor answers a truncated frame with a short result instead of a fault is dropped at startup rather than advertised with a truncation it cannot detect. Structure only: no handshake is spoken and no certificate verified — `decompressCertificate`, `compressCertificate`, `parseCertificateMessage` |
+| `pki.tls` | RFC 8879 certificate compression and the RFC 8446 §4.4.2 Certificate message it carries (RFC 8446 is obsoleted by RFC 9846), which is the handshake's largest payload. `decompressCertificate` decodes a `CompressedCertificate` and returns the algorithm, the declared uncompressed length, the recovered message raw, and its per-entry certificate DER. Decompression carries the two-sided bound §5 requires: capped at the message's own declared length so a bomb is refused mid-stream, then compared to that declaration exactly, which catches the under-length direction a cap alone cannot see. An algorithm outside the RFC 8879 registry, one the runtime cannot decompress, or one the receiver never advertised is refused before any decompressor is handed the bytes; an empty compressed body is a framing violation (`tls/bad-framing`); and trailing bytes, after the message or after the compressed frame, are refused (`tls/trailing-data`), so one chain has exactly one encoding. `compressCertificate` is the inverse and round-trips its own output before returning. `parseCertificateMessage` decodes the RFC 8446 §4.4.2 message on its own, surfacing each entry's certificate DER ready for `pki.schema.x509.parse` alongside its raw extensions; a separate extension negotiates `certificate_type`, so it is declared, never guessed. All three registered algorithms (zlib, brotli, zstd) are implemented, each offered only where the running Node decompresses it safely — one whose decompressor answers a truncated frame with a short result instead of a fault is dropped at startup rather than advertised with a truncation it cannot detect. Structure only: no handshake is spoken and no certificate verified — `decompressCertificate`, `compressCertificate`, `parseCertificateMessage` |
 | `pki.schema` | The schema family. `parse` detects which PKI format a DER or PEM input encodes and routes it to the right parser; `all` enumerates the registered formats; the engine and per-format members are grouped here |
 | `pki.schema.x509` | Certificates (RFC 5280) parsed into structured, validated fields. Each extension is surfaced by name with its `extnValue` bytes; the shared extension decoders that read those bytes are what `pki.lint.certificate`, `pki.inspect` and `pki.path.validate` consume, and they cover the RFC 3739 / ETSI EN 319 412-5 qualified-certificate `qcStatements` (EU-qualified declaration, reliance limit, QSCD flag, certificate type, retention, PDS URLs, country of qualification), the Microsoft Active Directory Certificate Services enrollment extensions (certificate template, CA version, previous-CA-certificate hash, application policies), subject information access, subject directory attributes, and the RFC 6960 OCSP no-check responder marker. Unknown statements stay opaque, fail-closed Fail-closed — `parse`, `pemDecode`, `pemEncode` |
 | `pki.schema.c509` | C509 certificates (draft-ietf-cose-cbor-encoded-cert), the compact CBOR profile of X.509, decoded fail-closed under deterministic CBOR. `encode` is the byte-exact inverse: a DER X.509 v3 certificate forward-transforms to a compact type-3 C509 whose reconstruction reproduces the original DER byte for byte, so the original signature still verifies. A `parse` result re-emits its native array in canonical deterministic CBOR, with the registry integer shorthands, the C509 compressions, and the compact draft-20 per-extension value forms: the scalar extensions (keyUsage, basicConstraints, extended key usage, subject key identifier, inhibitAnyPolicy, OCSP No Check, TLS Feature), the general-name-bearing extensions (subjectAltName, issuer alternative name, name constraints, CRL distribution points, freshest CRL, authority and subject information access, and the full authority key identifier) over one shared GeneralNames codec, certificate policies with their CPS-URI and UserNotice qualifiers, policy mappings and policy constraints, subject directory attributes, and the RFC 3779 resource-delegation extensions (IP address blocks and AS identifiers) with their RFC 8360 v2 twins, whose addresses ride either the delta-coded integer form or the byte-string form the specification mandates once an address exceeds eight octets. A value the compact form cannot carry exactly falls back to the byte-string form with its bytes intact; a certificate outside the invertible set throws a typed `C509Error`. Called explicitly, since it is CBOR rather than DER and so is not auto-routed |
@@ -223,26 +223,26 @@ comment blocks, is at [pkijs.com](https://pkijs.com).
 | `pki.schema.csrattrs` | EST CSR Attributes (`CsrAttrs`, RFC 8951 §3.5 / RFC 9908) — the `AttrOrOID` items a server sends to shape an enrollment: bare OIDs, attributes with raw values, and decoded views of the RFC 9908 meaningful types (extension requests, EC and RSA key-type conventions, the certification-request-info template). Unknown types are surfaced raw; structure and the RFC 9908 semantic MUSTs are fail-closed — `parse` |
 | `pki.est` | Enrollment over Secure Transport (RFC 7030 / 8951 / 9908 / 7616). The client verbs `cacerts`, `simpleenroll`, `simplereenroll`, `serverkeygen`, `csrattrs`, and `fullcmc` drive the RFC 7030 flow over `pki.transport` (inject your own via `opts.transport`, or take the fail-closed default): HTTPS only, an explicit trust anchor required, same-origin redirects followed while a downgrade or loop is refused, a 202 Retry-After surfaced but never slept, HTTP Basic or Digest (RFC 7616, SHA-256 / SHA-512-256; MD5 and no-qop refused by default) answered only after the server is authenticated, and the issued certificate chosen by public-key match. `serverkeygen` requests a server-generated key, cleartext or an opaque CMS EnvelopedData, with encryption bound to the CSR's key-identifier attribute over a confidentiality-bearing cipher. `csrattrs` fetches the CA's RFC 9908 attributes policy. For §3.5 channel binding, `simpleenroll` and `simplereenroll` accept a CSR builder `(tls) -> csr` instead of a CSR: it runs after the handshake with that connection's `tlsUnique`, so the request is signed over the session it is sent on, and it re-runs on any new connection a redirect or auth retry opens, recreating the CSR for that session (§3.2.1). A builder alongside Digest authentication is refused, since that header is computed over the body before the handshake. `fullcmc` (§4.3) carries a CMC Full PKI Request and reduces the CA's answer through `pki.cmc.verify` to one terminal outcome, refusing a response that fails to echo the transaction and nonce the request carried, or that covers a key the request never asked for; a certs-only reply to a bound request is refused rather than read as an issuance. Under the verbs sit the transport-agnostic codecs they compose: the RFC 8951 base64 transfer codec (which ignores Content-Transfer-Encoding), the `multipart/mixed` splitter, the certs-only and serverkeygen response validators over CMS, the enroll-attribute builders, and the HTTP response classifier — `transferDecode`/`transferEncode`, `parseCertsOnly`, `splitMultipartMixed`, `parseServerKeygenResponse`, `findIssuedCert`, `classifyResponse`, `paths`, and the builders |
 | `pki.scep` | SCEP pkiMessage codec (RFC 8894), the client side of Simple Certificate Enrollment. `build(spec)` assembles a request: a `PKCSReq` or `RenewalReq` wraps a PKCS#10 certification request, whose own proof-of-possession it verifies first; a `CertPoll` wraps an IssuerAndSubject naming the issuing CA and the request subject; and a `GetCert` or `GetCRL` wraps an IssuerAndSerialNumber naming a certificate by its issuer and a positive serial of at most 20 octets. It encrypts the messageData to the CA as the inner EnvelopedData (`pkcsPKIEnvelope`, AES-128-CBC), and signs that under the transaction attributes RFC 8894 §3.2 defines, a messageType, a caller-unique transactionId, and a 16-byte senderNonce. The recipient CA certificate must assert `keyEncipherment`. `build` also issues the CA-side `CertRep` response (§3.3.2): a SUCCESS envelopes a certs-only SignedData of the issued certificate (or the CRL for a GetCRL) to the requester and signs it under the CA key, while a FAILURE (carrying a `failInfo`) or a PENDING omits the pkcsPKIEnvelope and is signed detached, each echoing the request's senderNonce as `recipientNonce`. `parse(bytes, opts?)` reads a `PKCSReq`, `RenewalReq`, `CertPoll`, `GetCert`, `GetCRL`, or `CertRep` back (a messageType outside the RFC 8894 registry is refused): it verifies the outer signature first and refuses a message whose signature does not check, so the transaction attributes it returns come only from a verified signer, never alongside a false verdict. Because a valid signature only proves self-consistency with the embedded certificate, pass `opts.signerCert` to authenticate a CA response against the CA certificate you hold (a public-key mismatch is refused, `signerAuthenticated` reports the result); a caller that omits it gets a crypto-only verdict and must authenticate the surfaced `signerCert` itself. It maps the messageType, pkiStatus, failInfo, and the nonces from their RFC 8894 enumerants and refuses an unknown one; given `recipientKey` it decrypts the `pkcsPKIEnvelope` to the messageData, and given `expectedSenderNonce` it refuses a response whose recipientNonce does not echo it. It reads a CA's CertRep in full. `getCACaps(baseUrl, opts?)`, `getCACert(baseUrl, opts?)`, `getNextCACert(baseUrl, opts)`, `enroll(baseUrl, opts)`, `renew(baseUrl, opts)`, `getCert(baseUrl, opts)`, and `getCrl(baseUrl, opts)` carry that codec to a live CA over HTTP (RFC 8894 §4) through an injectable transport (`pki.transport.https` by default): `getCACaps` reports the CA's advertised capabilities and never lowers the client's algorithm choice on the unauthenticated response, `getCACert` pins the CA certificate to an out-of-band `expectedFingerprint` a returned certificate must match, `getNextCACert` fetches the CA's next (rollover) certificate and verifies the SignedData response against the current CA certificate (`caCertificate`) before returning it, refusing a response signed by any other key, and `enroll` and `renew` POST a PKCSReq or RenewalReq, authenticate the CertRep against the CA certificate and its nonce echo, select the issued certificate by public-key match, throw on a FAILURE with the CA's failInfo, and poll a PENDING response with CertPoll requests until the CA answers or a bounded poll-count and total-wait budget is spent. `getCert` and `getCrl` retrieve an already-issued certificate or a CA CRL by issuer and serial number, authenticated the same way; RFC 8894 §2.6, §2.7, and §3.3.4 recommend these queries only where HTTP certificate-store access (RFC 4387), LDAP, or a CRL distribution point is unavailable, so prefer those where a CA offers them. A PKIOperation goes over HTTP POST by default; `httpMethod: "GET"` carries it base64-encoded in the URL query for a legacy CA that accepts only GET (RFC 8894 §4.1). Every verb reaches an https CA through a forward proxy with `opts.proxy = { url, auth?, tls? }`: a `CONNECT` tunnel is opened to the proxy and the origin TLS is negotiated inside it, so the proxy carries the enrollment without being able to read it or substitute the origin certificate. Basic proxy authentication (RFC 7617) is sent only over an `https://` proxy, where it rides the authenticated TLS-to-proxy channel; an `http://` proxy is tunnel-only, and credentials over a plaintext proxy are refused rather than exposed (see `pki.transport`) — `build`, `parse`, `parseCapabilities`, `getCACaps`, `getCACert`, `getNextCACert`, `enroll`, `renew`, `getCert`, `getCrl` |
-| `pki.transport` | The shared, fail-closed `node:https` transport the enrollment clients drive. `pki.transport.https(defaults)` returns a `transport(request) → { status, headers, body, tls }`, where `tls` carries the negotiated `protocol`, `cipher`, raw `peerCertificate`, and one channel binding per TLS version: on TLS 1.2 the RFC 5929 `tlsUnique` that `pki.est.challengePasswordFromTlsUnique` links to an EST enrollment (RFC 7030 §3.5), and on TLS 1.3 the RFC 9266 `tlsExporter` (32 bytes under the label `EXPORTER-Channel-Binding`, zero-length context). Each is `null` on the version that does not define it, and `tlsExporter` is withheld below TLS 1.3 because RFC 9266 §2 also requires the RFC 7627 extended master secret, which Node gives no way to confirm. Since `tlsUnique` on the response arrives after the body was sent, a request `body` may instead be a function `(tls) -> bytes` the transport invokes after the handshake and before it writes the body, so the caller builds a channel-bound CSR from `tlsUnique` on the same connection it posts over. It may return a promise, so the CSR can be signed with `pki.csr.sign` while the connection is held open; a callback that throws, rejects, or returns anything other than bytes or a string fails the request closed rather than posting an empty enrollment. This is the toolkit's only socket choke point: an explicit trust anchor (or an opt-in to the system store) is required, `rejectUnauthorized` is always on, TLS is floored at 1.2, the response body is capped while it streams, and a stalled socket times out. The EST, ACME, and CMP clients reuse it verbatim. A `request.proxy = { url, auth?, tls? }` reaches the origin through a forward proxy: a `CONNECT` tunnel is opened to the proxy and the origin TLS is negotiated inside it under the identical origin trust policy, so the proxy cannot read the origin's encrypted session or substitute an authenticated origin certificate. Proxy credentials are sent only over an `https://` proxy, whose own certificate is verified against `proxy.tls`, so they ride an authenticated channel; a plaintext `http://` proxy is tunnel-only and carrying `auth` on one is refused (`proxy-auth-requires-tls`) rather than exposing the credentials to the proxy hop. `auth.scheme` is `"basic"` (RFC 7617), which sends its credential on the first CONNECT, or `"digest"` (RFC 7616), which answers the proxy's `Proxy-Authenticate` challenge on a `407` by hashing the method `CONNECT` over the authority-form target, and answers exactly once, so a proxy repeating its challenge has rejected the credential rather than obtained another attempt. Digest runs the policy the origin verbs apply, refusing MD5 and a challenge carrying no `qop` unless `auth.allowMD5` / `auth.allowLegacyQop` says otherwise. A malformed option, a failed CONNECT, an unverified proxy certificate, or an unaccepted credential fails closed. The SCEP, EST, ACME, and CMP clients each thread it through as `opts.proxy`. If you inject your own transport, return `tls` too: `pki.est.serverkeygen` asserts the negotiated cipher can protect the delivered private key, and a transport that reports no cipher is trusted rather than refused, so omitting the field silently skips that check — `https` |
+| `pki.transport` | The shared, fail-closed `node:https` transport the enrollment clients drive. `pki.transport.https(defaults)` returns a `transport(request) → { status, headers, body, tls }`, where `tls` carries the negotiated `protocol`, `cipher`, raw `peerCertificate`, and one channel binding per TLS version: on TLS 1.2 the RFC 5929 `tlsUnique` that `pki.est.challengePasswordFromTlsUnique` links to an EST enrollment (RFC 7030 §3.5), and on TLS 1.3 the RFC 9266 `tlsExporter` (32 bytes under the label `EXPORTER-Channel-Binding`, zero-length context). Each is `null` on the version that does not define it, and `tlsExporter` is withheld below TLS 1.3 because RFC 9266 §2 also requires the extended master secret of RFC 7627 (obsoleted by RFC 9846), which Node gives no way to confirm. Since `tlsUnique` on the response arrives after the body was sent, a request `body` may instead be a function `(tls) -> bytes` the transport invokes after the handshake and before it writes the body, so the caller builds a channel-bound CSR from `tlsUnique` on the same connection it posts over. It may return a promise, so the CSR can be signed with `pki.csr.sign` while the connection is held open; a callback that throws, rejects, or returns anything other than bytes or a string fails the request closed rather than posting an empty enrollment. This is the toolkit's only socket choke point: an explicit trust anchor (or an opt-in to the system store) is required, `rejectUnauthorized` is always on, TLS is floored at 1.2, the response body is capped while it streams, and a stalled socket times out. The EST, ACME, and CMP clients reuse it verbatim. A `request.proxy = { url, auth?, tls? }` reaches the origin through a forward proxy: a `CONNECT` tunnel is opened to the proxy and the origin TLS is negotiated inside it under the identical origin trust policy, so the proxy cannot read the origin's encrypted session or substitute an authenticated origin certificate. Proxy credentials are sent only over an `https://` proxy, whose own certificate is verified against `proxy.tls`, so they ride an authenticated channel; a plaintext `http://` proxy is tunnel-only and carrying `auth` on one is refused (`proxy-auth-requires-tls`) rather than exposing the credentials to the proxy hop. `auth.scheme` is `"basic"` (RFC 7617), which sends its credential on the first CONNECT, or `"digest"` (RFC 7616), which answers the proxy's `Proxy-Authenticate` challenge on a `407` by hashing the method `CONNECT` over the authority-form target, and answers exactly once, so a proxy repeating its challenge has rejected the credential rather than obtained another attempt. Digest runs the policy the origin verbs apply, refusing MD5 and a challenge carrying no `qop` unless `auth.allowMD5` / `auth.allowLegacyQop` says otherwise. A malformed option, a failed CONNECT, an unverified proxy certificate, or an unaccepted credential fails closed. The SCEP, EST, ACME, and CMP clients each thread it through as `opts.proxy`. If you inject your own transport, return `tls` too: `pki.est.serverkeygen` asserts the negotiated cipher can protect the delivered private key, and a transport that reports no cipher is trusted rather than refused, so omitting the field silently skips that check — `https` |
 | `pki.jose` | Flattened JWS (RFC 7515) and JWK thumbprints (RFC 7638). `sign` and `verify` run a Flattened JWS against declarative profiles (ACME outer, EAB inner, keyChange inner) that carry the required and forbidden header rules as data. `base64url` is the strict RFC 4648 §5 codec, rejecting padding, non-alphabet characters, and non-canonical trailing bits. `parseJson` is a bounded reader that refuses duplicate members at any depth. `thumbprint` is the RFC 7638 / 8037 / 9964 canonical digest. The algorithm registry binds each `alg` to its key type (ES/RS/PS/EdDSA/ML-DSA), leaving no code path for `alg:none`, an RS256→HS256 key confusion, or an all-zero ECDSA signature; `assertPublicJwk` refuses a JWK carrying private material, so an exported private key is never published; `verify` holds a JWS's own embedded `jwk` to the same rule (RFC 7515 §4.1.3), so a message carrying a private key in its header is refused rather than returned in the verdict. `opts.key` names the key a message must be signed under and governs: where the profile also permits an embedded header `jwk`, the two must be the same key — compared as RFC 7638 thumbprints, so member order cannot make equal keys differ — and a disagreement is refused rather than resolved in the message's favor. `keySource` reports which key answered, since a signature checked against a key you named is a different claim from one checked against the key the message carried — `sign`, `verify`, `base64url`, `parseJson`, `thumbprint`, `assertPublicJwk` |
 | `pki.acme` | ACME (RFC 8555 / 8737 / 8738 / 9773). `client(directoryUrl, opts)` is a stateful client driving a live CA directory over `pki.transport`: `newAccount`, `newOrder`, `newAuthz`, `getOrder`, `getAuthorization`, `getChallenge`, `respondToChallenge`, `finalize`, `pollOrder`, `pollAuthorization`, and `downloadCertificate` walk the issuance flow, with `newAuthz` pre-authorizing a single identifier (§7.4.1) and `downloadCertificate` binding the issued certificate to the order — its key, its identifiers, or both; at least one is required by default and the result reports `boundToKey` / `boundToIdentifiers` — before choosing among alternate chains (`Link rel="alternate"`, §7.4.2, via a `selectChain` predicate bounded by `maxAlternates`). `revokeCert` (account-key or certificate-key signed), `keyChange`, `updateAccount` (change the account contacts, §7.3.2), `listOrders` (the account's orders list, following the §7.1.2.1 `Link rel="next"` pagination bounded by a page cap and confined to the orders origin), `deactivateAccount`, `deactivateAuthorization`, `renewalInfo` (ARI), `renewalWindow` (the RFC 9773 §4.2/4.3 renewal decision), and `scheduleRenewal` (the §4.1 auto-sleeping renewal loop that sleeps until the selected instant and refetches until it is time to renew, stopping at the certificate's notAfter) complete the lifecycle. Every URL is HTTPS only, an explicit trust anchor is required, each request carries a fresh single-use nonce with a bounded badNonce retry (and, when `opts.resignKeys` supplies caller-approved alternative account-key algorithms, a bounded RFC 8555 §6.2 badSignatureAlgorithm re-sign that the CA's advertised list can only filter, never widen, so it cannot force a weaker algorithm), reads are POST-as-GET, polling is bounded and sleeps on a Retry-After via an injectable sleeper capped by a poll count and a total-wait budget, and every response body is size-capped. The transport is injectable via `opts.transport`. Over the message layer it composes resource-object validators (closed status enums, conditional-required fields, unknown fields ignored), the three §7.1.6 state machines, the request builders (newAccount with External Account Binding, newOrder with `replaces`, finalize with a CSR identifier-set match and account-key-reuse rejection, challenge responses, deactivation, revokeCert in both key modes, the keyChange nested JWS, POST-as-GET), the http-01 / dns-01 / tls-alpn-01 challenge computations, the dns and ip identifier validators, and the ARI certID with serial sign-padding preserved — `client`, `validate`, `identify`, `assertTransition`, the builders, `keyAuthorization`, `http01`, `dns01`, `tlsAlpn01Extension`, `verifyTlsAlpn01`, `ariCertId` |
 | `pki.schema.smime` | S/MIME ESS signed-attribute values (RFC 5035 / RFC 8551). `parseSigningCertificate` and `parseSigningCertificateV2` bind a signature to its signing certificate (cert hash, hash algorithm, issuer `GeneralNames` and serial); `parseSmimeCapabilities` decodes the ordered capability list; `decodeAttribute` dispatches a CMS attribute by OID, enforcing the single-value rule and deferring on unknown types. A companion decoder for CMS signed attributes rather than an auto-routed format — `parseSigningCertificate`, `parseSigningCertificateV2`, `parseSmimeCapabilities`, `decodeAttribute` |
-| `pki.cmc` | Build and interpret CMC messages (RFC 5272). `build(spec, signer)` assembles a Full PKI Request across all three request arms (PKCS#10, CRMF, other) and carries it either way RFC 5272 §3.2 allows: `{ cert, key }` signs it, while `{ mac: { identifier, secret } }` authenticates it under a shared secret for a client that holds no key yet, using the PasswordRecipientInfo that section requires and deriving the key from the identifier followed by the secret. A key that cannot sign for itself proves possession another way: `spec.popChallenge` answers the authority's encrypted challenge (RFC 5272 §6.7), decrypting the proof value, confirming it hashes to the witness the challenge carries, and returning the MAC the authority asked for, with `cmc/pop-failed` when the value is not the one issued. A signed request goes through `pki.cms.sign` under `id-cct-PKIData`. A PKCS#10 (`tcr`) request is verified against its own proof-of-possession before signing, so a request whose self-signature does not verify under its subject public key is refused rather than signed into a message a CA would reject. Body-part identifiers are unique across the whole message and never the reserved 0; a caller's clash is refused rather than renumbered, since a control may already reference it. An Identity Proof V2 witness is computed over the `reqSequence` bytes exactly as emitted (§6.2.1 step 1) rather than a re-serialization, a POP Link Witness is emitted only alongside the POP Link Random control §6.3.1.1 requires beside it, and a renewal carries neither Identification nor Identity Proof in either version. `verify(response, sent)` takes what the CA returned plus the state the client retained and reduces it to one terminal outcome: `issued`, `pending`, `confirm-required`, `pop-required`, or `rejected`. It binds the exchange first — Transaction Identifier, the Sender and Recipient Nonce echo compared in constant time and by full value so a truncation cannot match, and the Data Return echo — with each check applying only if the client sent that half, and, once sent, an absent or differing echo being a refusal, which is the replay defense. `bodyPartIDs` extends the same rule to what the response is about: a status reporting on a body part the request never sent is refused, which the transaction and nonce cannot catch, because a server can echo both correctly while answering about a different message. Several status controls are permitted and the worst governs, so a failure cannot hide behind an earlier success; the absence of any status control is success, per §6.1.2. The carrier's signature must verify (§3.2.1.3.4): a conforming SignedData carries its own signer certificate, so the ordinary build-then-verify flow needs nothing extra and the verdict reports `signatureVerified: true`. Where the signer is found nowhere the posture is fail-closed with a named opt-out — supply `certs` with the responder's certificate, or `allowUnverified: true`, in which case the verdict reports `signatureVerified: false`. Doing neither is refused, the opt-out never excuses a signature that is present and wrong, and a carrier with no signer at all is refused outright. The response's own `cmsSequence` and `otherMsgs` come back raw, since a request whose only arm was the other-message form has no certificate to return and §4.1 puts its answer there. Nothing is trusted: issued certificates are read from the CMS certificate bag (§4.2) and surfaced raw for `pki.path.validate`, and a Publish Trust Anchors control is surfaced with `trusted: false` rather than added to a store — `build`, `verify` |
-| `pki.schema.cmc` | Decode CMC messages (RFC 5272 as updated by RFC 6402): a Full PKI Request (`PKIData`) or Full PKI Response (`PKIResponse`) riding inside a CMS SignedData, reached by the encapsulated content type (`id-cct-PKIData` / `id-cct-PKIResponse`). Controls are surfaced in wire order with their values raw, so an unrecognized one is data rather than a fault. Tagged requests decode across all three arms. The status verdicts (`CMCStatusInfo` v1 and `CMCStatusInfoV2`) are collected as an ordered list, and the RFC 6402 two-module `OtherStatusInfo` ambiguity — `pendInfo` and `extendedFailInfo` are both untagged SEQUENCEs in the 1988 module, told apart only by their first element — is resolved by inspection and refused when it cannot be told apart. Body-part identity is unique across the whole message rather than per sequence, 0 is reserved as the reference to the enclosing PKIData, and the `reqSequence` bytes are surfaced exactly as they appeared so an Identity Proof witness is computed over the wire bytes. A companion decoder for CMS content rather than an auto-routed format — `parse`, `parsePkiData`, `parsePkiResponse` |
+| `pki.cmc` | Build and interpret CMC messages (RFC 5272, obsoleted by RFC 10002). `build(spec, signer)` assembles a Full PKI Request across all three request arms (PKCS#10, CRMF, other) and carries it either way RFC 5272 §3.2 allows: `{ cert, key }` signs it, while `{ mac: { identifier, secret } }` authenticates it under a shared secret for a client that holds no key yet, using the PasswordRecipientInfo that section requires and deriving the key from the identifier followed by the secret. A key that cannot sign for itself proves possession another way: `spec.popChallenge` answers the authority's encrypted challenge (RFC 5272 §6.7), decrypting the proof value, confirming it hashes to the witness the challenge carries, and returning the MAC the authority asked for, with `cmc/pop-failed` when the value is not the one issued. A signed request goes through `pki.cms.sign` under `id-cct-PKIData`. A PKCS#10 (`tcr`) request is verified against its own proof-of-possession before signing, so a request whose self-signature does not verify under its subject public key is refused rather than signed into a message a CA would reject. Body-part identifiers are unique across the whole message and never the reserved 0; a caller's clash is refused rather than renumbered, since a control may already reference it. An Identity Proof V2 witness is computed over the `reqSequence` bytes exactly as emitted (§6.2.1 step 1) rather than a re-serialization, a POP Link Witness is emitted only alongside the POP Link Random control §6.3.1.1 requires beside it, and a renewal carries neither Identification nor Identity Proof in either version. `verify(response, sent)` takes what the CA returned plus the state the client retained and reduces it to one terminal outcome: `issued`, `pending`, `confirm-required`, `pop-required`, or `rejected`. It binds the exchange first — Transaction Identifier, the Sender and Recipient Nonce echo compared in constant time and by full value so a truncation cannot match, and the Data Return echo — with each check applying only if the client sent that half, and, once sent, an absent or differing echo being a refusal, which is the replay defense. `bodyPartIDs` extends the same rule to what the response is about: a status reporting on a body part the request never sent is refused, which the transaction and nonce cannot catch, because a server can echo both correctly while answering about a different message. Several status controls are permitted and the worst governs, so a failure cannot hide behind an earlier success; the absence of any status control is success, per §6.1.2. The carrier's signature must verify (§3.2.1.3.4): a conforming SignedData carries its own signer certificate, so the ordinary build-then-verify flow needs nothing extra and the verdict reports `signatureVerified: true`. Where the signer is found nowhere the posture is fail-closed with a named opt-out — supply `certs` with the responder's certificate, or `allowUnverified: true`, in which case the verdict reports `signatureVerified: false`. Doing neither is refused, the opt-out never excuses a signature that is present and wrong, and a carrier with no signer at all is refused outright. The response's own `cmsSequence` and `otherMsgs` come back raw, since a request whose only arm was the other-message form has no certificate to return and §4.1 puts its answer there. Nothing is trusted: issued certificates are read from the CMS certificate bag (§4.2) and surfaced raw for `pki.path.validate`, and a Publish Trust Anchors control is surfaced with `trusted: false` rather than added to a store — `build`, `verify` |
+| `pki.schema.cmc` | Decode CMC messages (RFC 5272 as updated by RFC 6402, the pair obsoleted by RFC 10002 / 10003 / 10004): a Full PKI Request (`PKIData`) or Full PKI Response (`PKIResponse`) riding inside a CMS SignedData, reached by the encapsulated content type (`id-cct-PKIData` / `id-cct-PKIResponse`). Controls are surfaced in wire order with their values raw, so an unrecognized one is data rather than a fault. Tagged requests decode across all three arms. The status verdicts (`CMCStatusInfo` v1 and `CMCStatusInfoV2`) are collected as an ordered list, and the RFC 6402 two-module `OtherStatusInfo` ambiguity — `pendInfo` and `extendedFailInfo` are both untagged SEQUENCEs in the 1988 module, told apart only by their first element — is resolved by inspection and refused when it cannot be told apart. Body-part identity is unique across the whole message rather than per sequence, 0 is reserved as the reference to the enclosing PKIData, and the `reqSequence` bytes are surfaced exactly as they appeared so an Identity Proof witness is computed over the wire bytes. A companion decoder for CMS content rather than an auto-routed format — `parse`, `parsePkiData`, `parsePkiResponse` |
 | `pki.schema.engine` | The declarative ASN.1 structure-schema engine every format parser composes — `walk`, `encode`, `embeddedDer`, and the schema combinators |
 | `pki.path` | Certification-path validation (RFC 5280 §6). `validate` runs the §6.1 state machine over an ordered path and a trust anchor: signature chaining across RSA, ECDSA, EdDSA, ML-DSA, SLH-DSA and hybrid composite ML-DSA (a composite is accepted only when both its post-quantum and traditional components verify), validity windows, name chaining, basic constraints and path length, key usage, name constraints, and the certificate-policy tree. It returns a structured verdict with per-check reason codes and enforces a `pki.trust` anchor's per-purpose distrust-after dates and delegator purposes through `checkPurpose` — an anchor that carries either one with no purpose named to select by is refused as a configuration fault rather than validated as though it carried none. The verdict says what was established. `revocationChecked` takes the weakest outcome on the path: `false` with no checker supplied, `"determined"` when every certificate got an explicit good or revoked answer, `"waived"` when `softFail` turned an undetermined one into a pass, and `"undetermined"` when one could not be answered at all — which includes a checker that throws, a fault `softFail` does not waive because `softFail` opts into an undetermined answer, not into a broken checker. `anchorConstraints` names the purpose the anchor was judged under and whether each of its two constraints applied. `crlChecker` supplies CRL-based revocation, covering partitioned and sharded CRLs, whose §6.3.3 Distribution Point ↔ IDP correspondence lets corresponding shards accumulate reason coverage until all eight revocation reasons are covered, and delta CRLs, merged onto the complete CRL they may be combined with (§5.2.4) so a held certificate its delta releases reads good, while a delta that merges with nothing still reports what it lists and still withholds good. `ocspChecker` supplies OCSP-based revocation (RFC 6960: CertID binding, responder authorization, signature, currency) over the same pluggable hook. `build(leaf, opts)` is the discovering complement (RFC 4158): from a leaf, an untrusted pool of candidate CA certificates, and a trust store, it finds the ordered leaf-to-anchor path `validate` accepts, using name chaining plus the RFC 4158 §3.5 sort hints (an AKI/SKI match, an anchor-adjacent issuer, CA plus keyCertSign, validity at the check time — ordering hints, never filters), a depth-first search with backtracking so the first accepted path wins, and a bounded search (chain-length cap, candidate-expansion cap, identity-tuple visited set) so a cross-certificate cycle or Bridge-CA fan-out terminates deterministically. Every accept flows through `validate`, and its verdict is cross-checked against `openssl verify`. Opt-in AIA `caIssuers` fetching (`opts.fetchAia: true`) discovers a missing intermediate from a certificate's Authority Information Access URL (§4.2.2.1) over `pki.transport`, triggered only on a pool miss and bounded against SSRF and amplification: HTTPS only, a total fetch budget that caps fetching silently rather than throwing, a per-cert URL cap, a build-wide URL dedupe, a response-size and certificate-count cap, no redirect following, and every fault a silent skip. The TLS trust (`opts.tls`) stays distinct from the PKI `trustAnchors`, and every fetched certificate remains untrusted pool material that still flows through `validate` (never a trust anchor). It is off by default, so the default build is byte-identical offline. An `opts.direction` of `"reverse"` searches from a trust anchor toward the leaf (RFC 4158 §3.1), narrower when the anchor set is small and the leaf's issuer options fan out, and `"auto"` picks the direction by first-hop fan-out; reverse building reuses the same pool, visited set, caps, and `validate` gate, so the direction changes only search order, and the anchor is excluded from the returned path. Reverse building is pool-only and does not combine with `fetchAia`. When `opts.userInitialPolicySet` names acceptable certificate-policy OIDs and more than one path validates, build returns the accepted path whose user-constrained policy set best satisfies that set (RFC 4158 §4) rather than the first accepted path, the ranking bounded by the same candidate cap and a malformed set refused with `path/bad-input`; an `anyPolicy` entry is unconstrained and returns the first accepted path. In a mesh of cross-certified domains, where many candidates chain by name to the same place, a candidate is ranked by how many leading relative distinguished names it shares with the name the search is heading for (§3.5.16 and the §3.5.19 reverse method), so a certificate in the target's own domain is tried before one from a cross-certified domain, and forward building sorts a candidate under every candidate that can complete the path when its path length constraint cannot cover the certificates already below it (§3.5.7), an ordering that outranks the other hints rather than competing with them. No candidate is removed and an unbounded search still reaches every path the pool holds; a bounded one spends `maxCandidatesConsidered` on whichever branches the order steers it to. Pure and re-entrant — `validate`, `build`, `crlChecker`, `ocspChecker` |
-| `pki.x509` | Certificate issuance (RFC 5280 §4). `sign(spec, issuer, opts)` builds and signs a certificate from a `spec` of subject (a common-name string, an array of RDNs, or raw Name DER), the public key being certified, the validity window, an optional serial, and an optional `extensions` object. `randomSerial()` draws the same 20-octet CSPRNG serial the signer uses when the spec names none, so a serial can be reserved or logged before the certificate is issued. The `issuer` is a key alone (self-signed: issuer equals subject, signed with that key), a name plus public key plus key, or an issuing certificate plus key. The signature algorithm is resolved from the signing key through the shared registry, so RSA (PKCS#1 v1.5 or PSS via `opts.pss`), ECDSA P-256/384/521, Ed25519, Ed448, ML-DSA-44/65/87, the twelve SLH-DSA sets, and the composite arms all issue without a per-algorithm branch. It encodes basic constraints, key usage, extended key usage, subject and authority key identifiers (the SKI derived by SHA-1 of the subject key; the AKI optionally naming the issuing certificate by name and serial; both emitted without being named, the SKI on every certificate and the AKI on every certificate that is not self-signed, which is what RFC 5280 §4.2.1.1 and §4.2.1.2 place on the issuing CA, and `false` declines each only where the RFC allows the omission), subject alternative names, certificate policies with their RFC 5280 section 4.2.1.4 qualifiers (a CPS pointer and a user notice), name constraints, authority information access, CRL distribution points, the freshest CRL, issuer alternative names, the policy machinery path validation acts on (policy constraints, inhibit anyPolicy, policy mappings), the RFC 3739 qualified-certificate statements including the ETSI EN 319 412-5 set, the RFC 6962 certificate-transparency pair (the precertificate poison and the embedded SCT list), the Active Directory Certificate Services enrollment extensions (certificate template, legacy template name, CA version, previous-CA-certificate hash, application policies), subject information access, subject directory attributes, and the RFC 6960 OCSP no-check responder marker, from the spec. That is every extension the shared certificate-extension decoders read, so any certificate `pki.lint.certificate` and `pki.inspect` can read in full the toolkit can also issue; any other extension is taken as pre-encoded DER. `extensions.nameConstraints` takes `{ permitted, excluded }` lists of GeneralName-form objects, restricting what the CA being issued may itself issue; each base is held to the rule for a constraint base, and the extension is emitted critical as §4.2.1.10 requires. It derives the version from the field set and enforces the serial bounds, the UTCTime/GeneralizedTime cutover, the DER default omissions, and the CA cross-field rules; a violation throws a typed `CertificateError`. Returns DER, or a PEM `CERTIFICATE` with `opts.pem`. Every arm is independently verified by OpenSSL. `extension(name, value, opts)` encodes one Extension DER from the same plain value form, for the pre-encoded array form on the certificate, CSR, and CRL signers: the criticality follows what the signer emits, `opts.critical` reaches only the extensions whose criticality is the issuer's choice, and an unregistered dotted OID takes its extnValue as bytes. Parsing stays at `pki.schema.x509.parse` — `sign`, `randomSerial`, `extension` |
+| `pki.x509` | Certificate issuance (RFC 5280 §4). `sign(spec, issuer, opts)` builds and signs a certificate from a `spec` of subject (a common-name string, an array of RDNs, or raw Name DER), the public key being certified, the validity window, an optional serial, and an optional `extensions` object. `randomSerial()` draws the same 20-octet CSPRNG serial the signer uses when the spec names none, so a serial can be reserved or logged before the certificate is issued. `parseDn(dn)` reads a distinguished-name string into `{ rdns, dn, bytes }`, the inverse of the `dn` every parsed name carries, with `bytes` being the raw Name DER `spec.subject` and `spec.issuer` take. The `issuer` is a key alone (self-signed: issuer equals subject, signed with that key), a name plus public key plus key, or an issuing certificate plus key. The signature algorithm is resolved from the signing key through the shared registry, so RSA (PKCS#1 v1.5 or PSS via `opts.pss`), ECDSA P-256/384/521, Ed25519, Ed448, ML-DSA-44/65/87, the twelve SLH-DSA sets, and the composite arms all issue without a per-algorithm branch. It encodes basic constraints, key usage, extended key usage, subject and authority key identifiers (the SKI derived by SHA-1 of the subject key; the AKI optionally naming the issuing certificate by name and serial; both emitted without being named, the SKI on every certificate and the AKI on every certificate that is not self-signed, which is what RFC 5280 §4.2.1.1 and §4.2.1.2 place on the issuing CA, and `false` declines each only where the RFC allows the omission), subject alternative names, certificate policies with their RFC 5280 section 4.2.1.4 qualifiers (a CPS pointer and a user notice), name constraints, authority information access, CRL distribution points, the freshest CRL, issuer alternative names, the policy machinery path validation acts on (policy constraints, inhibit anyPolicy, policy mappings), the RFC 3739 qualified-certificate statements including the ETSI EN 319 412-5 set, the RFC 6962 certificate-transparency pair (the precertificate poison and the embedded SCT list), the Active Directory Certificate Services enrollment extensions (certificate template, legacy template name, CA version, previous-CA-certificate hash, application policies), subject information access, subject directory attributes, and the RFC 6960 OCSP no-check responder marker, from the spec. That is every extension the shared certificate-extension decoders read, so any certificate `pki.lint.certificate` and `pki.inspect` can read in full the toolkit can also issue; any other extension is taken as pre-encoded DER. `extensions.nameConstraints` takes `{ permitted, excluded }` lists of GeneralName-form objects, restricting what the CA being issued may itself issue; each base is held to the rule for a constraint base, and the extension is emitted critical as §4.2.1.10 requires. It derives the version from the field set and enforces the serial bounds, the UTCTime/GeneralizedTime cutover, the DER default omissions, and the CA cross-field rules; a violation throws a typed `CertificateError`. Returns DER, or a PEM `CERTIFICATE` with `opts.pem`. Every arm is independently verified by OpenSSL. `extension(name, value, opts)` encodes one Extension DER from the same plain value form, for the pre-encoded array form on the certificate, CSR, and CRL signers: the criticality follows what the signer emits, `opts.critical` reaches only the extensions whose criticality is the issuer's choice, and an unregistered dotted OID takes its extnValue as bytes. Parsing stays at `pki.schema.x509.parse` — `sign`, `randomSerial`, `extension`, `parseDn` |
 | `pki.csr` | PKCS#10 certification-request issuance (RFC 2986 / RFC 2985). `sign(spec, key, opts)` builds and signs a `CertificationRequest` from a `spec` of subject (which may be empty), the public key being certified, an optional `extensionRequest` carrying the requested v3 extensions a CA copies into the issued certificate (subject alternative names, key usage, extended key usage, basic constraints, certificate policies, subject key identifier, the RFC 3739 qualified-certificate statements, the Microsoft certificate template and application policies, subject information access, subject directory attributes, or an array of pre-encoded Extension DER; an extension the issuing CA assigns, such as the authority key identifier or the OCSP no-check marker, is refused by name rather than requested), and an optional `challengePassword`. `key` (or `{ key }`) is the subject's own private key: the request is self-signed to prove possession of the private half of `subjectPublicKey`, and that proof is verified before the request is returned, which is what `openssl req -verify` checks. The signature algorithm is resolved from the subject key, so RSA (PKCS#1 v1.5 or PSS via `opts.pss`), ECDSA, EdDSA, ML-DSA, SLH-DSA, and the composite arms all sign without a per-algorithm branch. Returns DER, or a PEM `CERTIFICATE REQUEST` with `opts.pem`; malformed input throws a typed `CsrError`. `verify(request)` asks the same question of a request someone else produced, over its exact signed `certificationRequestInfo` bytes under the `subjectPKInfo` inside them, through the one path-validation signature engine. It answers `{ verified, subject, subjectPublicKeyInfo, attributes, certificationRequestInfoBytes }`, all re-derived from the signed bytes, so a CA issues from the fields the signature covers rather than from the object it passed in. A `verified: true` says the producer held that private key and that the subject and requested extensions are the ones they signed; who they are is the enrollment protocol's question, not this one. Parsing stays at `pki.schema.csr.parse` — `sign`, `verify` |
 | `pki.attrcert` | Attribute-certificate issuance (RFC 5755). `sign(spec, issuer, opts)` builds and signs an `AttributeCertificate` as an Attribute Authority: a `spec` of `holder` (exactly one of an entity name, a `baseCertificateID` reference, a `fromCertificate` binding, or an object digest), the validity window as GeneralizedTime, an optional serial (positive, at most 20 octets, randomly generated when omitted), the `attributes` (role, clearance, group, chargingIdentity, accessIdentity, authenticationInfo, or pre-encoded Attribute DER), and optional `extensions` (auditIdentity, targetInformation, noRevAvail, aaControls, acProxying, authorityKeyIdentifier, cRLDistributionPoints, authorityInfoAccess, or pre-encoded Extension DER) each with its RFC 5755 criticality. The authorityKeyIdentifier is emitted without being named (sec. 4.3.3) and holds the AA certificate's subject key identifier; both extension forms are held to the rules sec. 4.3 and 4.4 place on the issuer (an audit identity of 1 to 20 octets, one Targets element and no targetCert, an OCSP location that is an HTTP URL, one distribution point naming a single DN or HTTP / LDAP URL, a role name that is a URI). An attribute certificate is never self-signed, so the `issuer` is the signing AA, supplied as `{ cert, key }` or `{ name, publicKey, key }`. The signature algorithm is resolved from the AA key, so RSA (PKCS#1 v1.5 or PSS via `opts.pss`), ECDSA, EdDSA, ML-DSA, SLH-DSA, and the composite arms all sign without a per-algorithm branch, and the signature is verified under the AA public key before the certificate is returned. Returns DER, or a PEM `ATTRIBUTE CERTIFICATE` with `opts.pem`; malformed input throws a typed `AttrCertError`. `verify(ac, issuer, opts)` is the receiving side, performing the RFC 5755 sec. 5 checks an attribute certificate and a named issuer can settle between them: the signature over the exact `AttributeCertificateInfo` bytes through the one path-validation signature engine, the AC naming the issuer this verifier trusts (compared as a distinguished name), the evaluation instant lying within the validity with equality at either bound succeeding as the section states, the sec. 4.3.2 targeting rule, and rejection of any critical extension this verb does not process (section 5 defines support as parsing the value AND rejecting where the value would reject, so `aaControls` and `acProxying`, whose constraints it does not evaluate, are refused when critical). It answers `{ verified, signatureValid, validityChecked, targetingChecked, holderBindingChecked, issuerPathChecked, holder, issuer, attributes, extensions, notBefore, notAfter, serialNumberHex, reason }` with the fields re-derived from the signed bytes; the holder's own certificate chain and the AC issuer's chain need certificates the verb is not given, so those slots report `false` rather than letting their absence read as a pass. Parsing stays at `pki.schema.attrcert.parse` — `sign`, `verify` |
-| `pki.crmf` | Certificate-request-message issuance (RFC 4211). `build(spec, key, opts)` assembles a `CertReqMessages` from a `spec` of `certReqId` (default 0, with the RFC 9483 `-1` sentinel allowed), a `certTemplate` of the requested fields (`subject`, `publicKey` as the SPKI DER of the key being certified, `validity`, requested `extensions`, an optional `version` 2), optional `controls` and `regInfo` (regToken, authenticator, utf8Pairs, oldCertID, protocolEncrKey, or pre-encoded `AttributeTypeAndValue` DER), and an optional `pop` selector. `key` (or `{ key }`) is the requester's private key: the message carries a `POPOSigningKey` proof of possession signed with the private half of `certTemplate.publicKey` and verified before the message is returned, exactly as a PKCS#10 CSR proves possession. A complete template signs the `CertRequest`; an incomplete one signs a `POPOSigningKeyInput`. The signature algorithm is resolved from the requested public key, so RSA (PKCS#1 v1.5 or PSS via `opts.pss`), ECDSA, EdDSA, ML-DSA, SLH-DSA, and the composite arms all sign without a per-algorithm branch. `key` is optional for a `raVerified` proof. A key that cannot sign, which is where an ML-KEM enrollment sits, takes a `POPOPrivKey` proof instead (RFC 4211 sec. 4.2, sec. 4.3): `pop.type` of `keyEncipherment` or `keyAgreement` with `pop.method: 'subsequentMessage'` declares whether an encrypted certificate (`encrCert`) or a challenge (`challengeResp`) completes the proof over the enrolling protocol's next exchange, and `pop.method: 'encryptedKey'` encloses the requester's private key for the CA in a CMS `EnvelopedData` under `id-ct-encKeyWithID`, requiring `pop.privateKey`, `pop.recipients`, the `pop.identifier` sec. 4.2.1 makes mandatory, and `pop.archive: true` because RFC 9810 sec. 5.2.8.3.1 permits the method only where archival is intended. The enclosed key must be the private half of `certTemplate.publicKey`, or the proof demonstrates possession of a key the request never asked to have certified. The `thisMessage` and `dhMAC` alternatives the specification deprecates are refused with their successors named. `pop.method: 'agreeMAC'` completes the four: `pop.key` is the requester's finite-field Diffie-Hellman private key, as a PKCS#8 DER, a PEM `PRIVATE KEY` block or a `KeyObject`, and `pop.caCert` the authority's certificate it already holds; the two agree a static secret (RFC 2875 sec. 3), and the key derived from it MACs the DER `certReq` under `id-dhPop-static-HMAC-SHA1`. Either key may name its group in the PKCS#3 or the X9.42 encoding. `pop.key` must be the private half of `certTemplate.publicKey`, and the template must name both a subject and a public key. Pass an array of specs for a batch; the CA-assigned template fields are never emitted. Returns DER, or a PEM block with `opts.pem`; malformed input throws a typed `CrmfError`. `verifyPop(messages)` is the receiving side: for each `CertReqMsg` it verifies the `POPOSigningKey` signature over the bytes RFC 4211 sec. 4.1 names — the DER of `poposkInput` when present, of `certReq` when not — through the one path-validation signature engine, and answers `{ verified, messages: [{ verified, method, cryptographicallyVerified, certReqId, subject, subjectBound, publicKey, reason }] }` with the fields re-derived from the message's own bytes. Each verdict reports only what its preimage covers: `publicKey` is the key possession was proven for, and `subject` is the requested name when the `certReq` was signed. A `poposkInput` preimage covers the key and the sender alone, so any subject beside it is unsigned and is withheld with `subjectBound: false`. A `raVerified` proof is an RA's out-of-band assertion and a `keyEncipherment` or `keyAgreement` proof completes over a later exchange, so each is reported unverified with its `method` named instead of guessed. Parsing stays at `pki.schema.crmf.parse` — `build`, `verifyPop` |
+| `pki.crmf` | Certificate-request-message issuance (RFC 4211). `build(spec, key, opts)` assembles a `CertReqMessages` from a `spec` of `certReqId` (default 0, with the RFC 9483 `-1` sentinel allowed), a `certTemplate` of the requested fields (`subject`, `publicKey` as the SPKI DER of the key being certified, `validity`, requested `extensions`, an optional `version` 2), optional `controls` and `regInfo` (regToken, authenticator, utf8Pairs, oldCertID, protocolEncrKey, or pre-encoded `AttributeTypeAndValue` DER), and an optional `pop` selector. `key` (or `{ key }`) is the requester's private key: the message carries a `POPOSigningKey` proof of possession signed with the private half of `certTemplate.publicKey` and verified before the message is returned, exactly as a PKCS#10 CSR proves possession. A complete template signs the `CertRequest`; an incomplete one signs a `POPOSigningKeyInput`. The signature algorithm is resolved from the requested public key, so RSA (PKCS#1 v1.5 or PSS via `opts.pss`), ECDSA, EdDSA, ML-DSA, SLH-DSA, and the composite arms all sign without a per-algorithm branch. `key` is optional for a `raVerified` proof. A key that cannot sign, which is where an ML-KEM enrollment sits, takes a `POPOPrivKey` proof instead (RFC 4211 sec. 4.2, sec. 4.3): `pop.type` of `keyEncipherment` or `keyAgreement` with `pop.method: 'subsequentMessage'` declares whether an encrypted certificate (`encrCert`) or a challenge (`challengeResp`) completes the proof over the enrolling protocol's next exchange, and `pop.method: 'encryptedKey'` encloses the requester's private key for the CA in a CMS `EnvelopedData` under `id-ct-encKeyWithID`, requiring `pop.privateKey`, `pop.recipients`, the `pop.identifier` sec. 4.2.1 makes mandatory, and `pop.archive: true` because RFC 9810 sec. 5.2.8.3.1 permits the method only where archival is intended. The enclosed key must be the private half of `certTemplate.publicKey`, or the proof demonstrates possession of a key the request never asked to have certified. The `thisMessage` and `dhMAC` alternatives the specification deprecates are refused with their successors named. `pop.method: 'agreeMAC'` completes the four: `pop.key` is the requester's finite-field Diffie-Hellman private key, as a PKCS#8 DER, a PEM `PRIVATE KEY` block or a `KeyObject`, and `pop.caCert` the authority's certificate it already holds; the two agree a static secret (RFC 2875 sec. 3, obsoleted by RFC 6955), and the key derived from it MACs the DER `certReq` under `id-dhPop-static-HMAC-SHA1`. Either key may name its group in the PKCS#3 or the X9.42 encoding. `pop.key` must be the private half of `certTemplate.publicKey`, and the template must name both a subject and a public key. Pass an array of specs for a batch; the CA-assigned template fields are never emitted. Returns DER, or a PEM block with `opts.pem`; malformed input throws a typed `CrmfError`. `verifyPop(messages)` is the receiving side: for each `CertReqMsg` it verifies the `POPOSigningKey` signature over the bytes RFC 4211 sec. 4.1 names — the DER of `poposkInput` when present, of `certReq` when not — through the one path-validation signature engine, and answers `{ verified, messages: [{ verified, method, cryptographicallyVerified, certReqId, subject, subjectBound, publicKey, reason }] }` with the fields re-derived from the message's own bytes. Each verdict reports only what its preimage covers: `publicKey` is the key possession was proven for, and `subject` is the requested name when the `certReq` was signed. A `poposkInput` preimage covers the key and the sender alone, so any subject beside it is unsigned and is withheld with `subjectBound: false`. A `raVerified` proof is an RA's out-of-band assertion and a `keyEncipherment` or `keyAgreement` proof completes over a later exchange, so each is reported unverified with its `method` named instead of guessed. Parsing stays at `pki.schema.crmf.parse` — `build`, `verifyPop` |
 | `pki.cmp` | CMP message building, transfer, and verification (RFC 9810). `build(message, opts)` assembles a protected `PKIMessage`. `message.header` carries the `sender` and `recipient` GeneralNames (including the anonymous NULL-DN) plus optional transaction metadata; a `transactionID` or `senderNonce` the caller omits is filled with 16 fresh random bytes (RFC 9810 §5.1.1, the width a receiver requires under RFC 9483 §3.5), and a `senderNonce` given under 128 bits is refused; a signature-protected `sender` the caller omits is filled with the signer certificate's subject (§3.1); `message.body` is a single-key object naming the arm — request-side `ir`, `cr`, `kur`, `krr` (key recovery, §5.3.7), `ccr` (cross-certification, §5.3.11: a `CertReqMessages` at the normative floor, where the requesting CA keeps its private key so a private-key-transport encryptedKey proof-of-possession is refused, and the optional App. D.6 single-request cardinality is not enforced), `p10cr`, `certConf`, `pollReq`, `genm`, `rr`, responder-side `ip`, `cp`, `kup`, `ccp`, `rp`, `genp`, `error`, `pollRep`, `krp`, `pkiconf`, and the registration-authority `nested` wrapper of complete PKIMessages (RFC 9810 §5.1.3.5). Protection is exactly one of `opts.{ key, cert }`, a signature under the sender key with the algorithm resolved from the signer certificate so RSA (PKCS#1 v1.5 / PSS), ECDSA, EdDSA, ML-DSA, SLH-DSA, and the composite arms all sign without a per-algorithm branch, `opts.mac`, a PBMAC1 shared-secret HMAC (RFC 9481 / 9579, PBKDF2-derived), or `opts.kem`, a KEM-based MAC for a client whose key can only establish secrets (RFC 9810 §5.1.3.4): the ciphertext a peer encapsulated to its ML-KEM key is decapsulated, the key is derived under HKDF-SHA256 with a context bound to the transaction identifier of the message that carried the ciphertext, and `pki.cmp.verify` checks it from the shared secret. Protection covers the exact DER of the virtual `ProtectedPart` and is self-verified before the message is returned, and `protectionAlg` is derived rather than caller-set, so the message the parser accepts is coherent by construction. A `p10cr` request's PKCS#10 proof-of-possession is verified before the message is protected, so one whose self-signature does not verify under its subject public key is refused rather than sent. `transfer(url, message, opts)` carries a built message to a CMP endpoint over `pki.transport` (RFC 9811): one POST of the DER PKIMessage, with the response classified fail-closed — 200 only for success, a non-200 2xx or an un-followed 3xx refused, a 4xx or 5xx carrying a CMP error PKIMessage forwarded as the integrity-protected verdict — and protection surfaced rather than verified. `wellKnownUrl(base, opts)` builds the §3.4 `/.well-known/cmp` request-URIs. `verify(message, opts)` checks the protection on an incoming message, either a signature through the same certification-path engine `pki.crl.verify` and `pki.ocsp.verify` use, with the EdDSA low-order-point and algorithm-confusion gates, or a PBMAC1 MAC recomputed from `opts.sharedSecret` and the message's own PBKDF2 parameters and constant-time compared, over the exact `ProtectedPart` reconstructed from the parser's raw slices. It is fail-closed on an unprotected message, a MAC algorithm it does not compute (reported as MAC-protected under that algorithm, never as a failed signature), an omitted keyLength, or a SHA-1 PRF, and returns a `{ valid, trusted, protectionType, signer, ... }` verdict. With `opts.trustAnchors` the signer certificate is fully path-validated (RFC 5280 §6.1 plus the RFC 9483 §3.2 `keyUsage.digitalSignature` gate) at a trusted current time, or an explicit `opts.time` for historical verification and never the message's self-asserted `messageTime`, before it is reported trusted; without one the verdict is crypto-only and the signer certificate is surfaced to anchor. `session(opts)` returns a stateful enrollment session whose `enroll(request)` drives a full `ir` / `cr` / `kur` / `p10cr` transaction over the shared transport, composing `build`, `transfer`, and `verify`. Every response is protection-verified, signer-trusted, and bound to the exchange (a stable `transactionID`, a fresh-`senderNonce` and echoed-`recipNonce` chain) before its body is read, with a bounded `pollReq` / `pollRep` loop for a `waiting` status and a `certConf` / `pkiConf` (or implicit) confirmation carrying an explicit `hashAlg` for a signature algorithm that does not convey its hash. It returns a terminal `{ outcome, certificate, chain, status, trusted, confirmed, implicitConfirm, transactionID, polls, transcript }`. A certification authority can take longer to answer than a process is held open, so a `poll-timeout` carries a `resumeToken` and `resumePoll(token)` continues the same transaction in a later process: the token is plain JSON naming the transaction, the nonce the next request echoes, the polled request and the arm its grant arrives on, and the key the grant must certify. It carries no secret and grants nothing, since the protection material and the endpoint come from the session built to resume with, and the resumed poll verifies, nonce-binds, and key-binds every response. Its fields are what the resumed exchange is held to, so store it where the enrollment's own state is stored: someone who can rewrite it can widen what the resumed session accepts, as far as that session's trust anchors and the authority's protection allow and no further. The same session also drives the other two RFC 9483 operations under that shell: `revoke(request)` sends an `rr` naming a certificate as `{ certificate }` or `{ certDetails }` with an optional CRLReason `reason`, and returns `revoked` / `rejected` / `poll-timeout`; `info(request)` sends a `genm` for one of the four support messages — `{ caCerts }`, `{ rootCaCert }`, `{ certReqTemplate }`, `{ crlUpdate }` — and returns `answered` with the decoded `value` and a `present` flag, since an absent response value is how each says nothing is available. A session revokes its own certificate: the signature over the request is the proof of authorization (§4.2), so the named certificate must be `opts.cert` and a PBMAC1 session is refused. The signature flavor requires `opts.trustAnchors` to authenticate the CA; a verified rejection or error and an exhausted poll budget are terminal verdicts, while a tampered, untrusted, or desynchronized response is a typed throw. Returns DER, or a PEM `CMP` block with `opts.pem`; malformed input throws a typed `CmpError`. `openKeyPackage(container, opts)` opens a private key the CA generated centrally and delivered in the `privateKey` field of a granted `CertifiedKeyPair` (RFC 9483 §4.1.6): a CMS `SignedData` over an RFC 5958 `AsymmetricKeyPackage`, sealed in a CMS `EnvelopedData`. `opts.key` (with `opts.cert`) opens the key transport and key agreement containers a signature-protected request selects, `opts.password` the password container a MAC-protected request selects. The authority is authorized before any key material is returned: its certificate must chain to an anchor in `opts.trustAnchors` AND assert the `id-kp-cmKGA` extended key usage, since a certificate with no `extendedKeyUsage` permits every purpose and so authorizes nothing; `opts.authorizedBySharedSecret` states §4.1.6's exemption for an entity that authorizes by the secret that protected its request. Returns `{ keys, kga, trusted }`, where each key is a PKCS#8 `PrivateKeyInfo` ready for `pki.key.import`; `keys` is the whole RFC 5958 `AsymmetricKeyPackage` (`SIZE (1..MAX)`), while a session enrollment requires the sequence of one §4.1.6 profiles it to. Both CMS layers are read as a ContentInfo or as the bare structure, told apart by what the SEQUENCE opens with. `session(opts)` drives the whole exchange under `opts.acceptCentralKeyGeneration`: the request omits `certTemplate.publicKey`, carries no proof of possession, and goes out as `cmp2021`; the session opens the delivered container with the credential it enrolled under and surfaces it as `deliveredKey`, having first checked that the issued certificate certifies the delivered key. Without the option, such a request and such a grant are both refused. Parsing stays at `pki.schema.cmp.parse` — `build`, `transfer`, `wellKnownUrl`, `verify`, `openKeyPackage`, `session` |
 | `pki.crl` | CRL issuance and verification (RFC 5280 §5). `sign(spec, issuer, opts)` builds and signs a `CertificateList` from a `spec` of `thisUpdate` and `nextUpdate`, an optional `crlNumber`, a `revoked` array (each entry a `serialNumber` and `revocationDate` with an optional `reason` or `invalidityDate`), and an optional `extensions` object (authority key identifier, issuer alternative name, issuing distribution point, delta-CRL indicator, freshest CRL, authority information access, which is every extension RFC 5280 §5.2 defines) or an array of pre-encoded Extension DER, with an `issuer` of `{ cert, key }` or `{ name, publicKey, key }`. The authority key identifier is emitted on every CRL whether or not it is named, as §5.2.1 places it on every conforming issuer, from the issuer certificate's SKI or the issuer key. The signature algorithm is resolved from the issuer key, so RSA (PKCS#1 v1.5 or PSS via `opts.pss`), ECDSA, EdDSA, ML-DSA, SLH-DSA, and the composite arms all sign without a per-algorithm branch. The version is derived from the extension set (v2 when any CRL or entry extension is present, else v1), the outer `signatureAlgorithm` matches `tbsCertList.signature`, an empty revocation list omits the field rather than emitting an empty SEQUENCE, `reasonCode` is an ENUMERATED and `invalidityDate` is always GeneralizedTime, the RFC fixes per-extension criticality, and the produced signature is verified under the issuer key before return. `verify(crl, issuer)` checks a CRL signature through the one path-validation signature engine, algorithm-confusion and EdDSA low-order gates included; handed a certificate rather than a bare key it also asks what only a certificate can answer — that the certificate is the issuer the CRL names, and that its `keyUsage`, when present, asserts `cRLSign` — so a CRL minted under an end-entity certificate of the same CA does not verify as that CA's. `isRevoked(crl, serialNumber, opts)` looks a serial up, and first checks that the CRL is one a serial can be looked up in at all — it is handed a serial and nothing else, so a CRL that speaks for part of its issuer's certificates is refused rather than answered from. A delta CRL lists changes since a base, so an entry recording a release reads as a revocation when read alone; an indirect CRL carries other issuers' entries, whose serials are unrelated to yours; and any other `issuingDistributionPoint` narrows the CRL to one distribution point, one kind of certificate, or a subset of revocation reasons, none of which a serial can be matched against. A CRL speaks for a span as well as a set, so `opts.time` states the instant the question is asked at and a list that has stopped speaking for it — `nextUpdate` passed, `thisUpdate` later, or no `nextUpdate` stated at all — is refused rather than read as a clean bill of health; without `opts.time` the lookup is structural and an absent serial means only that it is not on that list. `pki.path.crlChecker` is the verb for all of them: it is handed the certificate, merges a delta with its base, performs the §6.3.3 correspondence, and decides currency against the material it fetched. Returns DER, or a PEM `X509 CRL` with `opts.pem`; malformed input throws a typed `CrlError`. Parsing stays at `pki.schema.crl.parse` — `sign`, `verify`, `isRevoked` |
 | `pki.key` | Key-material lifecycle (RFC 5958 / RFC 8018). `encrypt(privateKey, password, opts)` wraps a PKCS#8 private key (DER, PEM, or an extractable `CryptoKey`) into an `EncryptedPrivateKeyInfo` under PBES2 (PBKDF2 with AES-CBC-Pad), where `opts` selects the `cipher` (`aes-256-cbc` default, `aes-192-cbc`, `aes-128-cbc`), the `prf` (`hmacWithSHA256` default, SHA-384/512, SHA-1), the `iterations` (default 600000), and the `salt`. The plaintext is validated as PKCS#8 before encryption, a default `prf` and `keyLength` are omitted so the parameters are byte-exact with OpenSSL, and the output is re-parsed before return. `decrypt(encrypted, password, opts)` recovers the inner `PrivateKeyInfo`, re-validated through `pki.schema.pkcs8.parse`: only PBES2 / PBKDF2 / AES-CBC is accepted (PBES1, PBMAC1, and scrypt are refused), the salt and iteration count are bounded before any derivation (`opts.maxIterations` lowers the cap), and a malformed parameter set or wrong-length IV is a distinct typed error. Because a MAC-less PBES2-CBC decrypt must not become a padding oracle (RFC 8018 §8), a wrong password and a valid-pad-but-not-a-key both surface the one uniform `key/decrypt-failed`. `export(key, opts)` and `import(input, opts)` move a private key as PKCS#8 or a public key as SubjectPublicKeyInfo. The key may come from the platform's WebCrypto or from a separately installed copy of this toolkit, and is exported through whichever holds its material; a non-extractable key, or one whose implementation keeps its material out of reach, is refused with that as the reason. Encoding is delegated to WebCrypto, so RSA carries an explicit NULL, EC a named curve, and Ed25519/Ed448/X25519/X448 omit parameters, and an ambiguous RSA or EC import requires `opts.algorithm`. `generate(algorithm, opts)` produces a key pair over RSA, ECDSA/ECDH, the Edwards and Montgomery curves, and the FIPS post-quantum ML-DSA and ML-KEM; `publicFromPrivate(privateKey)` derives the public key. Returns DER or PEM, with a typed `KeyError` on failure. Parsing stays at `pki.schema.pkcs8.parse` — `encrypt`, `decrypt`, `export`, `import`, `generate`, `publicFromPrivate` |
-| `pki.pkcs12` | PKCS#12 (.p12/.pfx) issuance and reading (RFC 7292 / RFC 9579). `build(spec, opts)` assembles a store from the OpenSSL-style `{ key, cert, ca?, friendlyName?, localKeyId? }` or the full `{ safeContents: [...] }`, where each element is a plaintext or PBES2-encrypted `SafeContents` of key, shroudedKey, cert, crl, secret, or nested `safeContents` bags. Keys and certs are validated before wrapping, a key paired with a certificate (the `{ key, cert }` form, or bags sharing a `localKeyId`) must be the private half of that certificate's public key, and `friendlyName` (BMPString) and `localKeyId` are single-value. Integrity is a classic Appendix B HMAC (the default, for maximum interoperability) or an RFC 9579 PBMAC1 (`opts.mac.algorithm`) over SHA-256/384/512, with shrouded keys and cert safes encrypted under RFC 8018 PBES2 (AES-128/192/256-CBC). Every password is encoded the PKCS#12 way — BMPString+NULL for the classic MAC, UTF-8 for the PBES2 bags and PBMAC1 — which is what OpenSSL and NSS consume, so a file it emits opens in both, cross-checked bidirectionally. The MAC covers the exact AuthenticatedSafe byte range, a DEFAULT-1 `MacData.iterations` is rejected up front, and the store is re-parsed before return. `verifyMac(pfx, password, opts)` recomputes a classic or PBMAC1 MAC over `macedBytes` and constant-time-compares it, throwing on a MAC-less or public-key-integrity store. Public-key integrity (`opts.integrity.mode: "public-key"`) wraps the AuthenticatedSafe in a CMS SignedData instead of a MAC, signed by any `pki.cms.sign` signer and carrying no MacData (§4); privacy stays independent, so `password` still PBES2-encrypts the bags. Public-key privacy wraps a SafeContents as a CMS EnvelopedData (AES-CBC, `id-envelopedData`, never GCM) encrypted to recipient public keys through the `pki.cms.encrypt` recipient model, via per-safe `recipients` or the `opts.recipientCerts` convenience, restricted to certificate recipients (RSA-OAEP, ECDH, X25519, X448, ML-KEM) since a password or KEK recipient could not be reopened by `open`. All four integrity-by-privacy combinations are permitted (§3.1). `open(pfx, password, opts)` reads a store back: it verifies the MAC first, so a wrong password is the MAC verdict rather than a decrypt error, then PBES2-decrypts every privacy safe and shrouded key bag and returns `{ integrityMode, macVerified, signers, keys, certs, crls, secrets }` — keys as re-validated PKCS#8 DER, certs, CRLs and secrets as raw DER, all with `friendlyName` and `localKeyId`, nested safes recursively. A MAC-less store is refused unless `opts.allowUnauthenticated`. A public-key-integrity store is verified through its CMS SignedData signature first (`pkcs12/signature-invalid` on failure), with the signer surfaced in `signers` but never trust-chained, which remains the caller's `pki.path.validate` step. A legacy-PBE store's Appendix C 3DES and RC2 bags are decrypted, RC2 through an in-tree RFC 2268 cipher, so an `openssl pkcs12 -legacy` or NSS store opens; the legacy RC4 schemes are refused. An `id-envelopedData` safe is decrypted with `opts.recipientKey` after the integrity gate (`pkcs12/no-recipient-key` when absent), every recipient-side fault and every post-integrity decrypt failure collapsing to the uniform `pkcs12/decrypt-failed`, and `opts.keys: 'crypto'` imports each key to a `CryptoKey`. It reads what OpenSSL and NSS produce. Returns DER or a PEM `PKCS12`, with a typed `Pkcs12Error` on failure. Parsing stays at `pki.schema.pkcs12.parse` — `build`, `verifyMac`, `open` |
-| `pki.cms` | CMS signing, verification, encryption, and compression (RFC 5652). `sign(content, signers, opts)` produces a SignedData (§5), attached or detached, with one or many signers over RSA, RSASSA-PSS, ECDSA, EdDSA, the post-quantum ML-DSA-44/65/87 (RFC 9882) and SLH-DSA (all twelve FIPS 205 sets, RFC 9814), and composite ML-DSA pairing ML-DSA with a traditional RSA, ECDSA, or EdDSA key (accepted only when both components verify, draft-ietf-lamps-cms-composite-sigs). It builds the signed attributes (content-type, message-digest, signing-time) as canonical DER, signs the exact §5.4 preimage, and emits a DER `Buffer` or PEM. The content may also be an async iterable of byte chunks, which signs a large detached payload without holding it in memory: the payload is hashed incrementally under every signer's digest algorithm in one pass, and `verify` accepts the same streamed form as its `content` option. A signer may also be key-only — `{ key, spki, keyIdentifier }` with no certificate — which RFC 5272 §3.2 requires when a Full PKI Request's signer is the key of a certification request that request carries: the signer identifier takes the subjectKeyIdentifier form carrying the identifier the request declares, the signature scheme resolves from the request's own public key, and no certificate is embedded. `verify(input, opts)` parses a SignedData over the strict `pki.schema.cms` codec, locates each SignerInfo's signer certificate by its issuerAndSerialNumber or subjectKeyIdentifier, and checks the signature over the exact §5.4 preimage: with signed attributes present it confirms the message-digest attribute equals the content digest and verifies over the DER re-encoding of the SignedAttributes (the on-wire `[0]` tag replaced by a universal SET OF), and otherwise directly over the content. It returns a per-signer verdict with the matched signer certificate. `valid` and `trusted` are separate claims and neither implies the other: a SignedData carries its own certificates, so `valid` says the signature is sound under one of them and nothing about who signed, while `trusted` says every signer chained to a root named in `opts.trustAnchors`, validated through the same RFC 5280 path engine `pki.path.validate` uses. Without anchors there is nothing to chain to and `trusted` is `false`; anchors that cannot be read throw, rather than reading as untrusted. An unrecognized option is refused rather than ignored. `countersign(cms, signers, opts)` adds a countersignature (§11.4) — a `SignerInfo` over the countersigned SignerInfo's signature value, any signer algorithm, nestable, with the primary bytes preserved so it still verifies — attached as the id-countersignature unsigned attribute; `verify` returns each countersignature's verdict under `signers[i].countersignatures` and every unsigned attribute — including an RFC 3161 timestamp token, attachable via `sign`'s `unsignedAttributes` — under `signers[i].unsignedAttrs`, surfaced unauthenticated. `encrypt(content, recipients, opts)` produces an EnvelopedData, AuthEnvelopedData (AES-GCM, the authenticated default), or EncryptedData, with recipients auto-dispatched off the certificate key to key transport (RSAES-OAEP; v1.5 is never emitted), key agreement (ephemeral-static ECDH over P-256/384/521 with the X9.63 KDF, and X25519/X448 with HKDF), symmetric key wrap, password (PBKDF2 with RFC 3211 PWRI-KEK), or the post-quantum ML-KEM (and composite ML-KEM, draft-lamps-pq-composite-kem) KEMRecipientInfo (RFC 9629/9936), wrapping one fresh content key for every recipient. The content may also be an async iterable of byte chunks, streamed through the AES-GCM or AES-CBC content cipher so a large plaintext is encrypted without being buffered whole; the ciphertext is assembled before the definite-length encryptedContent is emitted, byte-for-byte the buffered form. `decrypt(input, keyMaterial, opts)` recovers the content through the matching arm and returns it with an `authenticated` flag; every secret-dependent failure collapses to one uniform `cms/decrypt-failed` verdict (Bleichenbacher, EFAIL, and password-oracle freedom), and PKCS#1 v1.5 is decrypt-only under the RFC 3218 implicit-rejection countermeasure. With `opts.stream: true` the recovered `content` is an async iterable of plaintext chunks instead of a single Buffer, for a payload too large to hold whole; the authenticated modes (AuthEnvelopedData, AuthenticatedData, AES-GCM) verify integrity before the iterable yields, so a forged message throws before any plaintext is exposed, while a CBC EnvelopedData or EncryptedData yields the plaintext as the cipher produces it. Every key-establishment secret the toolkit allocates is wiped once used, on the failing path as well as the succeeding one: the KEM shared secret and its derived key-encryption key, the raw ECDH / X25519 / X448 agreement secret, a password-derived key-encryption key, and the content-encryption key itself, cleared once the message is complete since all recipients share it. Caller-supplied key material is never written to (best-effort; NIST SP 800-227 §4.2, RFC 9629 §7). `authenticate(content, recipients, opts)` produces an `id-ct-authData` (§9): cleartext content plus an HMAC-SHA-256/384/512 MAC, authenticated but not encrypted, with the fresh MAC key wrapped for every recipient through the same RecipientInfo model. The MAC covers the authenticated attributes (content-type and message-digest) re-tagged to the EXPLICIT SET OF (§9.2), or the content octets directly; `decrypt` recovers the MAC key, recomputes the MAC and independently the message-digest (§9.3), and releases the content only after both pass, with every secret-dependent failure collapsing to the uniform `cms/decrypt-failed`. `compress(content, opts)` and `decompress(input, opts)` produce and consume a CompressedData (RFC 3274; ZLIB, version 0, id-alg-zlibCompress); decompress bounds the uncompressed output at 16 MiB and stops before it is materialized, so a decompression bomb fails closed as `cms/decompress-too-large`. Compression is a size transform with no integrity or confidentiality (RFC 8551 §2.4.5). `certsOnly(certs, opts?)` builds a certs-only certificate-management message (RFC 8551 §3.8): a degenerate SignedData with an empty signerInfos and no eContent that conveys certificates and CRLs without signing anything, `parseCertsOnly(input, opts?)` reads one back to its raw certificate and CRL DER (a CRL-only message is valid here, unlike the cert-required RFC 5272 form that `pki.est.parseCertsOnly` reads), and `isCertsOnly(input)` recognizes one structurally. Fail-closed with typed `cms/*` errors — `sign`, `verify`, `countersign`, `encrypt`, `authenticate`, `decrypt`, `compress`, `decompress`, `certsOnly`, `parseCertsOnly`, `isCertsOnly` |
+| `pki.pkcs12` | PKCS#12 (.p12/.pfx) issuance and reading (RFC 7292 / RFC 9579, the latter obsoleted by RFC 9879). `build(spec, opts)` assembles a store from the OpenSSL-style `{ key, cert, ca?, friendlyName?, localKeyId? }` or the full `{ safeContents: [...] }`, where each element is a plaintext or PBES2-encrypted `SafeContents` of key, shroudedKey, cert, crl, secret, or nested `safeContents` bags. Keys and certs are validated before wrapping, a key paired with a certificate (the `{ key, cert }` form, or bags sharing a `localKeyId`) must be the private half of that certificate's public key, and `friendlyName` (BMPString) and `localKeyId` are single-value. Integrity is a classic Appendix B HMAC (the default, for maximum interoperability) or an RFC 9579 PBMAC1 (`opts.mac.algorithm`) over SHA-256/384/512, with shrouded keys and cert safes encrypted under RFC 8018 PBES2 (AES-128/192/256-CBC). Every password is encoded the PKCS#12 way — BMPString+NULL for the classic MAC, UTF-8 for the PBES2 bags and PBMAC1 — which is what OpenSSL and NSS consume, so a file it emits opens in both, cross-checked bidirectionally. The MAC covers the exact AuthenticatedSafe byte range, a DEFAULT-1 `MacData.iterations` is rejected up front, and the store is re-parsed before return. `verifyMac(pfx, password, opts)` recomputes a classic or PBMAC1 MAC over `macedBytes` and constant-time-compares it, throwing on a MAC-less or public-key-integrity store. Public-key integrity (`opts.integrity.mode: "public-key"`) wraps the AuthenticatedSafe in a CMS SignedData instead of a MAC, signed by any `pki.cms.sign` signer and carrying no MacData (§4); privacy stays independent, so `password` still PBES2-encrypts the bags. Public-key privacy wraps a SafeContents as a CMS EnvelopedData (AES-CBC, `id-envelopedData`, never GCM) encrypted to recipient public keys through the `pki.cms.encrypt` recipient model, via per-safe `recipients` or the `opts.recipientCerts` convenience, restricted to certificate recipients (RSA-OAEP, ECDH, X25519, X448, ML-KEM) since a password or KEK recipient could not be reopened by `open`. All four integrity-by-privacy combinations are permitted (§3.1). `open(pfx, password, opts)` reads a store back: it verifies the MAC first, so a wrong password is the MAC verdict rather than a decrypt error, then PBES2-decrypts every privacy safe and shrouded key bag and returns `{ integrityMode, macVerified, signers, keys, certs, crls, secrets }` — keys as re-validated PKCS#8 DER, certs, CRLs and secrets as raw DER, all with `friendlyName` and `localKeyId`, nested safes recursively. A MAC-less store is refused unless `opts.allowUnauthenticated`. A public-key-integrity store is verified through its CMS SignedData signature first (`pkcs12/signature-invalid` on failure), with the signer surfaced in `signers` but never trust-chained, which remains the caller's `pki.path.validate` step. A legacy-PBE store's Appendix C 3DES and RC2 bags are decrypted, RC2 through an in-tree RFC 2268 cipher, so an `openssl pkcs12 -legacy` or NSS store opens; the legacy RC4 schemes are refused. An `id-envelopedData` safe is decrypted with `opts.recipientKey` after the integrity gate (`pkcs12/no-recipient-key` when absent), every recipient-side fault and every post-integrity decrypt failure collapsing to the uniform `pkcs12/decrypt-failed`, and `opts.keys: 'crypto'` imports each key to a `CryptoKey`. It reads what OpenSSL and NSS produce. Returns DER or a PEM `PKCS12`, with a typed `Pkcs12Error` on failure. Parsing stays at `pki.schema.pkcs12.parse` — `build`, `verifyMac`, `open` |
+| `pki.cms` | CMS signing, verification, encryption, and compression (RFC 5652). `sign(content, signers, opts)` produces a SignedData (§5), attached or detached, with one or many signers over RSA, RSASSA-PSS, ECDSA, EdDSA, the post-quantum ML-DSA-44/65/87 (RFC 9882) and SLH-DSA (all twelve FIPS 205 sets, RFC 9814), and composite ML-DSA pairing ML-DSA with a traditional RSA, ECDSA, or EdDSA key (accepted only when both components verify, draft-ietf-lamps-cms-composite-sigs). It builds the signed attributes (content-type, message-digest, signing-time) as canonical DER, signs the exact §5.4 preimage, and emits a DER `Buffer` or PEM. The content may also be an async iterable of byte chunks, which signs a large detached payload without holding it in memory: the payload is hashed incrementally under every signer's digest algorithm in one pass, and `verify` accepts the same streamed form as its `content` option. A signer may also be key-only — `{ key, spki, keyIdentifier }` with no certificate — which RFC 5272 §3.2 requires when a Full PKI Request's signer is the key of a certification request that request carries: the signer identifier takes the subjectKeyIdentifier form carrying the identifier the request declares, the signature scheme resolves from the request's own public key, and no certificate is embedded. `verify(input, opts)` parses a SignedData over the strict `pki.schema.cms` codec, locates each SignerInfo's signer certificate by its issuerAndSerialNumber or subjectKeyIdentifier, and checks the signature over the exact §5.4 preimage: with signed attributes present it confirms the message-digest attribute equals the content digest and verifies over the DER re-encoding of the SignedAttributes (the on-wire `[0]` tag replaced by a universal SET OF), and otherwise directly over the content. It returns a per-signer verdict with the matched signer certificate. `valid` and `trusted` are separate claims and neither implies the other: a SignedData carries its own certificates, so `valid` says the signature is sound under one of them and nothing about who signed, while `trusted` says every signer chained to a root named in `opts.trustAnchors`, validated through the same RFC 5280 path engine `pki.path.validate` uses. Without anchors there is nothing to chain to and `trusted` is `false`; anchors that cannot be read throw, rather than reading as untrusted. An unrecognized option is refused rather than ignored. `countersign(cms, signers, opts)` adds a countersignature (§11.4) — a `SignerInfo` over the countersigned SignerInfo's signature value, any signer algorithm, nestable, with the primary bytes preserved so it still verifies — attached as the id-countersignature unsigned attribute; `verify` returns each countersignature's verdict under `signers[i].countersignatures` and every unsigned attribute — including an RFC 3161 timestamp token, attachable via `sign`'s `unsignedAttributes` — under `signers[i].unsignedAttrs`, surfaced unauthenticated. `encrypt(content, recipients, opts)` produces an EnvelopedData, AuthEnvelopedData (AES-GCM, the authenticated default), or EncryptedData, with recipients auto-dispatched off the certificate key to key transport (RSAES-OAEP; v1.5 is never emitted), key agreement (ephemeral-static ECDH over P-256/384/521 with the X9.63 KDF, and X25519/X448 with HKDF), symmetric key wrap, password (PBKDF2 with the PWRI-KEK of RFC 3211, carried forward by RFC 3370), or the post-quantum ML-KEM (and composite ML-KEM, draft-lamps-pq-composite-kem) KEMRecipientInfo (RFC 9629/9936), wrapping one fresh content key for every recipient. The content may also be an async iterable of byte chunks, streamed through the AES-GCM or AES-CBC content cipher so a large plaintext is encrypted without being buffered whole; the ciphertext is assembled before the definite-length encryptedContent is emitted, byte-for-byte the buffered form. `decrypt(input, keyMaterial, opts)` recovers the content through the matching arm and returns it with an `authenticated` flag; every secret-dependent failure collapses to one uniform `cms/decrypt-failed` verdict (Bleichenbacher, EFAIL, and password-oracle freedom), and PKCS#1 v1.5 is decrypt-only under the RFC 3218 implicit-rejection countermeasure. With `opts.stream: true` the recovered `content` is an async iterable of plaintext chunks instead of a single Buffer, for a payload too large to hold whole; the authenticated modes (AuthEnvelopedData, AuthenticatedData, AES-GCM) verify integrity before the iterable yields, so a forged message throws before any plaintext is exposed, while a CBC EnvelopedData or EncryptedData yields the plaintext as the cipher produces it. Every key-establishment secret the toolkit allocates is wiped once used, on the failing path as well as the succeeding one: the KEM shared secret and its derived key-encryption key, the raw ECDH / X25519 / X448 agreement secret, a password-derived key-encryption key, and the content-encryption key itself, cleared once the message is complete since all recipients share it. Caller-supplied key material is never written to (best-effort; NIST SP 800-227 §4.2, RFC 9629 §7). `authenticate(content, recipients, opts)` produces an `id-ct-authData` (§9): cleartext content plus an HMAC-SHA-256/384/512 MAC, authenticated but not encrypted, with the fresh MAC key wrapped for every recipient through the same RecipientInfo model. The MAC covers the authenticated attributes (content-type and message-digest) re-tagged to the EXPLICIT SET OF (§9.2), or the content octets directly; `decrypt` recovers the MAC key, recomputes the MAC and independently the message-digest (§9.3), and releases the content only after both pass, with every secret-dependent failure collapsing to the uniform `cms/decrypt-failed`. `compress(content, opts)` and `decompress(input, opts)` produce and consume a CompressedData (RFC 3274; ZLIB, version 0, id-alg-zlibCompress); decompress bounds the uncompressed output at 16 MiB and stops before it is materialized, so a decompression bomb fails closed as `cms/decompress-too-large`. Compression is a size transform with no integrity or confidentiality (RFC 8551 §2.4.5). `certsOnly(certs, opts?)` builds a certs-only certificate-management message (RFC 8551 §3.8): a degenerate SignedData with an empty signerInfos and no eContent that conveys certificates and CRLs without signing anything, `parseCertsOnly(input, opts?)` reads one back to its raw certificate and CRL DER (a CRL-only message is valid here, unlike the cert-required RFC 5272 form that `pki.est.parseCertsOnly` reads), and `isCertsOnly(input)` recognizes one structurally. Fail-closed with typed `cms/*` errors — `sign`, `verify`, `countersign`, `encrypt`, `authenticate`, `decrypt`, `compress`, `decompress`, `certsOnly`, `parseCertsOnly`, `isCertsOnly` |
 | `pki.smime` | S/MIME message assembly, verification, encryption, and compression over the CMS layer (RFC 8551). `sign(content, signers, opts)` wraps a MIME entity in either form: `multipart/signed`, where the content stays readable in any MUA and a detached CMS SignedData rides alongside as `application/pkcs7-signature` with a matching `micalg`, or `application/pkcs7-mime; smime-type=signed-data`, where the whole entity is a base64 CMS SignedData. The signed bytes are the entity's §3.1.1 canonical form with CRLF line endings, and `verify(message, opts)` unwraps both forms and recomputes over the same canonicalizer, so a transport that re-wraps line endings still verifies while a tampered part fails. `encrypt(content, recipients, opts)` envelopes a MIME entity as an opaque `application/pkcs7-mime` message and `decrypt(message, keyMaterial, opts)` opens one, as `smime-type=authEnveloped-data` (AES-GCM, confidentiality and integrity, the default) or `smime-type=enveloped-data` (AES-CBC, confidentiality only, so `decrypt` reports `authenticated: false`, the §3.3 no-integrity caveat). The `smime-type` is derived from the CMS body rather than the header, and decryption is fail-closed and oracle-free. The crypto is entirely `pki.cms.sign` / `verify` / `encrypt` / `decrypt`, so it is algorithm-agnostic: any RSA / RSASSA-PSS / ECDSA / EdDSA / ML-DSA / SLH-DSA signer and any RSA-OAEP / ECDH / X25519 / X448 / AES-KW / PBKDF2 / ML-KEM recipient carries through. As with `cms.verify`, `verify` returns the per-signer verdict plus the recovered content, and `valid` and `trusted` are separate claims: `valid` says the signature is sound under a certificate the message carried, `trusted` says every signer chained to a root named in `opts.trustAnchors`. Anchoring here is validated for email at both ends of the chain — the signer certificate must carry `emailProtection` (RFC 8550 §4.4.4) and the anchor's own trust metadata must permit that purpose, since a root can be distrusted for email while remaining a good TLS root. `sign` refuses a signer certificate a conforming reader would reject: a `keyUsage` extension without `digitalSignature` or `nonRepudiation` (RFC 8550 §4.4.2), or an `extendedKeyUsage` extension without `emailProtection` or `anyExtendedKeyUsage` (§4.4.4); a certificate carrying neither extension signs. Override either with `requiredEku` / `checkPurpose`. `compress(content, opts)` and `decompress(message, opts)` add the opaque `application/pkcs7-mime; smime-type=compressed-data; name=smime.p7z` frame (§3.6, RFC 3274), a size transform with no integrity or confidentiality (§2.4.5), bounded against a bomb; the recovered content, which may itself be signed or enveloped, is returned for the caller to re-verify. Header protection (RFC 9788): `sign` and `encrypt` take `opts.protectHeaders`, which inlines the caller's `opts.headers` on the Cryptographic Payload root (its Content-Type gaining `hp="clear"` when signed or `hp="cipher"` when encrypted) so the CMS signature or encryption covers them, defeating a transport that rewrites or reads Subject, From, and the rest. `verify` and `decrypt` surface the authenticated inner set as `protectedHeaders` plus `headerProtection { present, mode, fromMismatch, confidential, legacy }`, so a tampered outer header cannot alter it and `fromMismatch` flags an outer From that disagrees. Encryption applies a Header Confidentiality Policy: the default `hcp_baseline` obscures the outer Subject to `[...]` and removes Comments and Keywords, so the real values live only in the ciphertext, and `decrypt` recovers them. Every emitted header routes through a fail-closed injection guard that rejects a CR, LF, or NUL value and a non-ftext name, and a malformed or contradictory `hp` wrap fails closed as `smime/bad-header-protection` rather than silently downgrading. The CMS crypto is unchanged. Inbound legacy RFC 8551 header protection is recognized opt-in: `verify` and `decrypt` with `opts.legacyHeaderProtection` detect a legacy `message/rfc822`-wrapped payload by the RFC 9788 §4.10.1 four-condition identification and surface the inner headers under `headerProtection.legacy = { headers, mode, fromMismatch, confidential }`, where `headers` is an ordered `[{ name, value }]` array retaining legally repeated fields such as `Received`. Those never appear in `protectedHeaders` and never set `present: true`. Because a legacy message is structurally indistinguishable from an ordinary forwarded `message/rfc822`, this is an explicit heuristic (§4.10.2, "no strong end-to-end guarantees"): a caller keying trust off `present` or `protectedHeaders` is never misled, and only one that explicitly reads `headerProtection.legacy.headers` and cross-checks `legacy.fromMismatch` consumes it. It is off by default, and a nested crypto layer, an inner `hp=`, a non-`message/rfc822` payload, or a duplicate Content-Type reports `legacy: null`. Bidirectionally interoperable with `openssl smime` and `openssl cms`. `buildCertsOnly(certs, opts?)` wraps a `pki.cms.certsOnly` certificate-management message in one `application/pkcs7-mime; smime-type=certs-only; name=smime.p7c` entity, read back by OpenSSL's `pkcs7 -print_certs`. Fail-closed with typed `smime/*` errors — `sign`, `verify`, `encrypt`, `decrypt`, `compress`, `decompress`, `buildCertsOnly` |
 | `pki.tsp` | Time-Stamp Protocol (RFC 3161). `sign(messageImprint, tsa, opts)` produces a TimeStampToken: a CMS SignedData over `pki.cms.sign` whose content is a `TSTInfo` carrying the timestamped message imprint, the TSA policy, a serial number, and `genTime` with optional accuracy, nonce, and ordering, plus the §2.4.2 signing-certificate attribute binding the token to the TSA certificate (SHA-2 imprints, any `pki.cms.sign` TSA key). The TSA certificate is held to §2.3 before signing (one critical extendedKeyUsage naming timeStamping alone) with the codes `verify` answers, `genTime` keeps its milliseconds as the §2.4.2 fraction of a second, and an accuracy naming no field is refused. `request` and `parseRequest` build and parse the TimeStampReq a client sends (imprint, requested policy, nonce, certReq); `response` and `parseResponse` handle the TimeStampResp a TSA returns, either a granted status wrapping a token or a rejection with PKIStatus and failure info, with the §2.4.2 status-to-token coupling enforced in both directions. `verify(token, data, opts)` verifies a token fail-closed: the CMS signature over the exact signed bytes, the message imprint recomputed from the data, the TSTInfo content type, the ESSCertID(V2) binding to the TSA certificate, the §2.3 critical timeStamping-only extendedKeyUsage, the request nonce when used, and, with a trust anchor supplied, full certification-path validation of the TSA certificate at the token's `genTime` — judged under the `timeStamping` purpose, so an anchor's own per-purpose trust metadata reaches the decision rather than sitting inert. It returns `{ valid, trusted, genTime, serialNumber, tstInfo, ... }`, where `trusted` is the separate claim that the authority chained to an anchor you named: without one there is nothing to chain to and it is `false`, which is the distinction a timestamp re-read years later turns on — `sign`, `request`, `parseRequest`, `response`, `parseResponse`, `verify` |
-| `pki.ocsp` | Online Certificate Status Protocol (RFC 6960), both the responder and relying-party surface. `buildRequest(query, opts)` builds an OCSPRequest for one or more `{ cert, issuer }` pairs, with the CertID hashed under SHA-1 by default per the RFC 5019 lightweight profile or under SHA-2, plus an optional RFC 9654 nonce (32 to 128 octets, the requester floor that section sets) and an optional requestor signature, under which the signer certificate's subject is the requestorName unless one is stated (RFC 6960 §4.1.2). `sign(responseData, responder, opts)` produces a signed BasicOCSPResponse over the exact `ResponseData` DER, from the issuing CA directly or a delegated responder, under any `pki.cms.sign` key including the post-quantum ML-DSA and SLH-DSA sets, with `good`, `revoked` (reason and time), or `unknown` per-certificate status, and per-response `singleExtensions` naming the §4.4.4 archive cutoff and the §4.4.2 CRL reference as fields, each read back by name by the parser. The signer refuses what its own lint would grade an error: a pre-encoded singleExtension that RFC 6960 places in requests or in responseExtensions, a CRL entry extension carried at the wrong criticality, and CRL references or entry extensions on a non-issued response, which itself places the §4.4.8 extended revoked definition in responseExtensions without being asked. `buildErrorResponse(status)` produces the unsigned §2.3 error (`tryLater`, `unauthorized`, and the rest). `verify(response, opts)` verifies a response fail-closed against the same hardened gates `pki.path.ocspChecker` runs: the CertID binding, responder authorization (the issuing CA, or a CA-issued delegate bearing id-kp-OCSPSigning and id-pkix-ocsp-nocheck and passing the full out-of-path certificate gates), the signature over `tbsResponseDataBytes`, currency against `thisUpdate` and `nextUpdate`, and the request-nonce echo. It returns `{ status: "good" / "revoked" / "unknown", ... }` and never silently accepts. `verifyRequest(request, opts)` is the responder-side inverse of `buildRequest`: it verifies a client's signed request (RFC 6960 §4.1.1) under the requestor certificate the request carries, trying each embedded certificate since the field is unordered, and reports `signed`, `signatureValid`, every certificate whose key verified the signature and whose subject is the `requestorName` the request states (`signerCerts`, so a key carried under an expired certificate beside its renewal is not hidden behind ordering, while a same-key certificate under another name is not the requestor) with the first one's decoded subject, the full embedded certificate bag (`certs`, including intermediates for path building), and the request's CertIDs; the name check is reported as `requestorNamed` (RFC 6960 §4.1.2) and `valid` requires it, a request no verifying certificate names falls back to listing the verifying ones with `valid: false`, and an unsigned request is reported with `signed: false` rather than refused. Transport-free — `buildRequest`, `sign`, `buildErrorResponse`, `verify`, `verifyRequest` |
+| `pki.ocsp` | Online Certificate Status Protocol (RFC 6960), both the responder and relying-party surface. `buildRequest(query, opts)` builds an OCSPRequest for one or more `{ cert, issuer }` pairs, with the CertID hashed under SHA-1 by default per the RFC 5019 lightweight profile (obsoleted by RFC 9919) or under SHA-2, plus an optional RFC 9654 nonce (32 to 128 octets, the requester floor that section sets) and an optional requestor signature, under which the signer certificate's subject is the requestorName unless one is stated (RFC 6960 §4.1.2). `sign(responseData, responder, opts)` produces a signed BasicOCSPResponse over the exact `ResponseData` DER, from the issuing CA directly or a delegated responder, under any `pki.cms.sign` key including the post-quantum ML-DSA and SLH-DSA sets, with `good`, `revoked` (reason and time), or `unknown` per-certificate status, and per-response `singleExtensions` naming the §4.4.4 archive cutoff and the §4.4.2 CRL reference as fields, each read back by name by the parser. The signer refuses what its own lint would grade an error: a pre-encoded singleExtension that RFC 6960 places in requests or in responseExtensions, a CRL entry extension carried at the wrong criticality, and CRL references or entry extensions on a non-issued response, which itself places the §4.4.8 extended revoked definition in responseExtensions without being asked. `buildErrorResponse(status)` produces the unsigned §2.3 error (`tryLater`, `unauthorized`, and the rest). `verify(response, opts)` verifies a response fail-closed against the same hardened gates `pki.path.ocspChecker` runs: the CertID binding, responder authorization (the issuing CA, or a CA-issued delegate bearing id-kp-OCSPSigning and id-pkix-ocsp-nocheck and passing the full out-of-path certificate gates), the signature over `tbsResponseDataBytes`, currency against `thisUpdate` and `nextUpdate`, and the request-nonce echo. It returns `{ status: "good" / "revoked" / "unknown", ... }` and never silently accepts. `verifyRequest(request, opts)` is the responder-side inverse of `buildRequest`: it verifies a client's signed request (RFC 6960 §4.1.1) under the requestor certificate the request carries, trying each embedded certificate since the field is unordered, and reports `signed`, `signatureValid`, every certificate whose key verified the signature and whose subject is the `requestorName` the request states (`signerCerts`, so a key carried under an expired certificate beside its renewal is not hidden behind ordering, while a same-key certificate under another name is not the requestor) with the first one's decoded subject, the full embedded certificate bag (`certs`, including intermediates for path building), and the request's CertIDs; the name check is reported as `requestorNamed` (RFC 6960 §4.1.2) and `valid` requires it, a request no verifying certificate names falls back to listing the verifying ones with `valid: false`, and an unsigned request is reported with `signed: false` rather than refused. Transport-free — `buildRequest`, `sign`, `buildErrorResponse`, `verify`, `verifyRequest` |
 | `pki.ct` | Certificate Transparency (RFC 6962). `parseSctList` decodes the `SignedCertificateTimestampList` a certificate or OCSP response carries, a TLS-presentation-language payload inside the §3.3 double DER wrap, into per-SCT log id, exact `timestamp` (BigInt), named signature algorithm, and raw signature. `reconstructSignedData` rebuilds the exact `digitally-signed` preimage, and `verifySct` verifies an SCT signature against a log's public key, routing an ECDSA signature through the strict DER-conformance gate and verifying through the crypto engine, resolving true or false and throwing a typed error on a structural fault. On the producing side, `encodeSctList` builds the extension value byte for byte as the exact inverse of `parseSctList`, and `signSct` performs a log's signing step. For trust, `parseLogList` ingests the CT log-list JSON into constraint-carrying trusted logs, recomputing each log's id as SHA-256 of its key and refusing a disagreeing id (a swapped key, §3.2) and decoding the state and temporal-interval constraints; `verifySctWithLogList` resolves the log key from an SCT's log id, enforces the state (usable, qualified, and readonly trusted; retired only before retirement; pending and rejected refused) and the temporal-interval window, then delegates the signature check to `verifySct`. `verifyLogListSignature(json, signature, publicKey)` verifies the detached `log_list.sig` over the raw log-list bytes against a caller-pinned signer key (RSASSA-PKCS1-v1.5/SHA-256 and an EC P-256 arm, with forgeable-key defenses failing closed), cross-checked against `openssl dgst`. `fetchLogList(opts)` turns that chain into a live client: it GETs the `log_list.json` and its detached `log_list.sig` over `pki.transport`, verifies the detached signature over the raw fetched bytes against a caller-pinned distributor key before parsing, so an unverified document is never parsed, read, cached, or surfaced, then ingests the same bytes through `parseLogList` and returns the trusted-log set plus the surfaced `version` and `timestamp`. Above the per-SCT layer, `verifySctList` renders a certificate-level verdict over every SCT a certificate carries (§3.3), reporting how many distinct trusted logs verified an SCT (so a duplicated SCT cannot inflate the count) and from how many distinct trusted operators against a caller's CT policy (`minScts` and `minOperators`, both defaulting to the RFC floor of one), where a policy shortfall is a verdict and a per-SCT failure is a recorded row rather than a thrown call; `x509CertEntry` reconstructs the precertificate log entry from a final certificate by removing the SCT-list extension from its TBSCertificate as byte surgery, so its embedded SCTs verify end to end (§3.2). The toolkit bakes in no vendor URL or key, TLS trust is explicit with `rejectUnauthorized` always on, each response is size-capped before the trust chain, and the transport is injectable so the whole path is testable offline — `parseSctList`, `reconstructSignedData`, `verifySct`, `encodeSctList`, `signSct`, `parseLogList`, `verifySctWithLogList`, `verifySctList`, `x509CertEntry`, `verifyLogListSignature`, `fetchLogList` |
 | `pki.merkle` | Merkle-tree proof verification (RFC 6962 / RFC 9162). `leafHash`, `nodeHash`, and `emptyRootHash` build the domain-separated (0x00 leaf, 0x01 node) SHA-256 tree hashes. `verifyInclusion` folds an audit proof back to a root, and `verifyConsistency` reconstructs both the old and new root, which is the append-only guarantee; each is constant-time-compared to a trusted checkpoint root. Fail-closed on bad geometry, sync hashing, transport-free — `leafHash`, `nodeHash`, `emptyRootHash`, `verifyInclusion`, `verifyConsistency` |
 | `pki.trust` | Mozilla and CCADB trust-store ingestion. `parseCertdata` reads the NSS `certdata.txt` object stream and `parseCcadbCsv` the CCADB CSV export, both into one constraint-carrying anchor shape: the per-purpose trust bits, where only `CKT_NSS_TRUSTED_DELEGATOR` grants, and the per-purpose distrust-after dates the bare root list omits. Certificate and trust objects pair by byte-exact issuer and serial rather than adjacency and are cross-checked against the parsed DER, so metadata cannot attach to the wrong root. `anchor()` hands an entry to `pki.path.validate({ trustAnchors, checkPurpose })`, and `anchor(entry, { nameConstraints })` attaches the namespace a root program trusts a root for when that is narrower than the root certificate states, a `{ permitted, excluded }` pair of `{ tag, base }` subtrees that `validate` seeds as the RFC 5280 §6.1.1(h)(i) initial value, intersecting with each certificate's own constraints. Offline, fail-closed, bounded — `parseCertdata`, `parseCcadbCsv`, `anchor` |

package/lib/asn1-der.js

@@ -555,7 +555,7 @@ function _assertWellFormedUtf16(s) {
 
 function _decodeUtf8Strict(buf) {
   try {
-    return new TextDecoder("utf-8", { fatal: true }).decode(buf);
+    return new TextDecoder("utf-8", { fatal: true, ignoreBOM: true }).decode(buf);
   } catch (_e) {
     throw new Asn1Error("asn1/bad-utf8-string", "invalid UTF-8 in UTF8String");
   }

package/lib/cbor-det.js

@@ -46,7 +46,7 @@ var CborError = frameworkError.CborError;
 var _fbuf = new ArrayBuffer(8);
 var _fdv = new DataView(_fbuf);
 
-var _utf8 = new TextDecoder("utf-8", { fatal: true });
+var _utf8 = new TextDecoder("utf-8", { fatal: true, ignoreBOM: true });
 
 var _MAX_EPOCH_SECONDS = 8640000000000n;
 

package/lib/guard-name.js

@@ -21,6 +21,10 @@ var _numToString = intrinsic.uncurry(Number.prototype.toString);
 var _create = intrinsic.create;
 var _hasOwn = intrinsic.hasOwn;
 var _fromCharCode = String.fromCharCode;
+var _bufferFrom = intrinsic.bufferFrom;
+var _TextDecoderCtor = TextDecoder;
+var _utf8Fatal = new _TextDecoderCtor("utf-8", { fatal: true, ignoreBOM: true });
+var _decodeUtf8 = intrinsic.uncurry(_TextDecoderCtor.prototype.decode);
 var _String = String;
 var _isArray = Array.isArray;
 var _isBuffer = intrinsic.isBuffer;
@@ -159,6 +163,124 @@ function escapeControlBytes(str) {
 }
 
 var DN_SPECIAL = intrinsic.assign(intrinsic.create(null), { 0x2c: 1, 0x2b: 1, 0x22: 1, 0x5c: 1, 0x3c: 1, 0x3e: 1, 0x3b: 1 });
+
+function _hexNibble(c) {
+  if (c >= 0x30 && c <= 0x39) return c - 0x30;
+  if (c >= 0x41 && c <= 0x46) return c - 0x41 + 10;
+  if (c >= 0x61 && c <= 0x66) return c - 0x61 + 10;
+  return -1;
+}
+function _isAttrTypeStart(c) { return (c >= 0x41 && c <= 0x5a) || (c >= 0x61 && c <= 0x7a); }
+function _isAttrTypeChar(c) { return _isAttrTypeStart(c) || (c >= 0x30 && c <= 0x39) || c === 0x2d; }
+function _isDigit(c) { return c >= 0x30 && c <= 0x39; }
+
+// @enforced-by behavioral -- the descriptor grammar has no rename-proof shape distinct
+function isAttributeDescriptor(name) {
+  if (typeof name !== "string" || name.length === 0) return false;
+  if (!_isAttrTypeStart(_charCodeAt(name, 0))) return false;
+  for (var i = 1; i < name.length; i++) {
+    if (!_isAttrTypeChar(_charCodeAt(name, i))) return false;
+  }
+  return true;
+}
+
+// @enforced-by behavioral -- the inverse of escapeDnValue has no rename-proof shape distinct
+function parseDnString(str, E, code, label) {
+  if (typeof str !== "string") throw E(code, label + " must be a string");
+  var rdns = [], atvs = [], i = 0, n = str.length;
+  if (n === 0) return rdns;
+  for (;;) {
+    var typeStart = i;
+    var first = _charCodeAt(str, i);
+    if (_isDigit(first)) {
+      while (i < n && (_isDigit(_charCodeAt(str, i)) || _charCodeAt(str, i) === 0x2e)) i++;
+    } else if (_isAttrTypeStart(first)) {
+      while (i < n && _isAttrTypeChar(_charCodeAt(str, i))) i++;
+    }
+    if (i === typeStart) throw E(code, label + " has a component with no attribute type");
+    var type = _strSlice(str, typeStart, i);
+    if (i >= n || _charCodeAt(str, i) !== 0x3d) throw E(code, label + " component " + type + " has no '=' after its attribute type");
+    i++;
+
+    var value = "", hex = null, pending = [];
+    function flushPending() {
+      if (pending.length === 0) return;
+      var decoded;
+      try { decoded = _decodeUtf8(_utf8Fatal, _bufferFrom(pending)); }
+      catch (e) { throw E(code, label + " has a run of '\\' hex escapes that is not valid UTF-8 (RFC 4514 sec. 3)", e); }
+      value += decoded;
+      pending = [];
+    }
+    if (i < n && _charCodeAt(str, i) === 0x23) {
+      i++;
+      var hexStart = i;
+      while (i < n && _hexNibble(_charCodeAt(str, i)) >= 0) i++;
+      var span = i - hexStart;
+      if (span === 0 || (span & 1) === 1) throw E(code, label + " has a '#' value that is not an even number of hex digits");
+      hex = _strSlice(str, hexStart, i);
+    } else {
+      var valueStart = i, lastWasBareSpace = false;
+      for (; i < n; i++) {
+        var c = _charCodeAt(str, i);
+        if (c === 0x2c || c === 0x2b) break;
+        if (c !== 0x5c) {
+          if (c === 0x00 || c === 0x22 || c === 0x3b || c === 0x3c || c === 0x3e) {
+            throw E(code, label + " has an unescaped character RFC 4514 sec. 3 requires to be escaped");
+          }
+          if (c === 0x20 && i === valueStart) {
+            throw E(code, label + " has an unescaped leading space, which RFC 4514 sec. 3 requires to be escaped");
+          }
+          lastWasBareSpace = c === 0x20;
+        } else {
+          lastWasBareSpace = false;
+        }
+        if (c === 0x5c) {
+          i++;
+          if (i >= n) throw E(code, label + " ends with a trailing '\\' that escapes nothing");
+          var e1 = _charCodeAt(str, i);
+          var h1 = _hexNibble(e1);
+          if (h1 >= 0) {
+            if (i + 1 >= n) throw E(code, label + " has a '\\' hex escape with only one digit");
+            var h2 = _hexNibble(_charCodeAt(str, i + 1));
+            if (h2 < 0) throw E(code, label + " has a '\\' hex escape whose second digit is not hex");
+            _append(pending, h1 * 16 + h2);
+            i++;
+            continue;
+          }
+          if (e1 !== 0x20 && e1 !== 0x23 && e1 !== 0x3d && DN_SPECIAL[e1] !== 1) {
+            throw E(code, label + " escapes a character RFC 4514 sec. 2.4 does not give a meaning to");
+          }
+          flushPending();
+          value += _charAt(str, i);
+          continue;
+        }
+        flushPending();
+        value += _charAt(str, i);
+      }
+      flushPending();
+      if (lastWasBareSpace) {
+        throw E(code, label + " has an unescaped trailing space, which RFC 4514 sec. 3 requires to be escaped");
+      }
+    }
+    _append(atvs, { type: type, value: hex === null ? value : null, hex: hex });
+
+    if (i >= n) { _append(rdns, atvs); return rdns; }
+    var sep = _charCodeAt(str, i);
+    if (sep !== 0x2c && sep !== 0x2b) {
+      throw E(code, label + " has a component followed by a character that is not a separator");
+    }
+    i++;
+    if (sep === 0x2b) {
+      if (i >= n) throw E(code, label + " ends with a '+' that joins nothing");
+    } else {
+      _append(rdns, atvs);
+      atvs = [];
+      if (i >= n) throw E(code, label + " ends with a separator that joins nothing");
+      while (i < n && _charCodeAt(str, i) === 0x20) i++;
+      if (i >= n) throw E(code, label + " ends with a separator that joins nothing");
+    }
+  }
+}
 // @enforced-by behavioral -- the escaping has no rename-proof code shape distinct
 function escapeDnValue(v) {
   var s = _String(v), out = "";
@@ -535,7 +657,8 @@ module.exports = intrinsic.freeze({
   capturedRdns: capturedRdns, copyDnRdns: copyDnRdns,
   assertNoControlBytes: assertNoControlBytes, assertPrintableIa5: assertPrintableIa5,
   dnEqual: dnEqual, rdnEqual: rdnEqual, emailEqual: emailEqual, dpnCorresponds: dpnCorresponds,
-  escapeControlBytes: escapeControlBytes, escapeDnValue: escapeDnValue,
+  escapeControlBytes: escapeControlBytes, escapeDnValue: escapeDnValue, parseDnString: parseDnString,
+  isAttributeDescriptor: isAttributeDescriptor,
   lowerAscii: lowerAscii, uriSchemeIs: uriSchemeIs,
   stripTrailingDot: stripTrailingDot, isFqdnHost: isFqdnHost, splitMailbox: splitMailbox,
   constraintBaseRefusal: constraintBaseRefusal,

package/lib/guard-text.js

@@ -24,7 +24,7 @@ function decode(input, maxBytes, ErrorClass, spec) {
     input = bytes.source(input, ErrorClass, spec.badInput, spec.label);
     if (bytes.lengthOf(input) > maxBytes) throw new ErrorClass(spec.tooLarge, spec.label + " exceeds the size cap");
     if (spec.fatal) {
-      try { return _decode(new _TextDecoder(charset, { fatal: true }), input); }
+      try { return _decode(new _TextDecoder(charset, { fatal: true, ignoreBOM: true }), input); }
       catch (e) { throw new ErrorClass(spec.badDecode, spec.label + " is not valid " + charset, e); }
     }
     return _toString(input, charset);

package/lib/oid.js

@@ -46,8 +46,13 @@ var FAMILIES = Object.assign(Object.create(null), {
   attributeType: { base: [2, 5, 4], of: {
     commonName: 3, surname: 4, serialNumber: 5, countryName: 6,
     localityName: 7, stateOrProvinceName: 8, streetAddress: 9,
-    organizationName: 10, organizationalUnitName: 11, title: 12, givenName: 42,
-    clearance: 55, role: 72 } },
+    organizationName: 10, organizationalUnitName: 11, title: 12,
+    businessCategory: 15, postalCode: 17, name: 41, givenName: 42,
+    initials: 43, generationQualifier: 44, distinguishedNameQualifier: 46,
+    clearance: 55, pseudonym: 65, role: 72, organizationIdentifier: 97 } },
+
+  cabfJurisdiction: { base: [1, 3, 6, 1, 4, 1, 311, 60, 2, 1], of: {
+    jurisdictionLocalityName: 1, jurisdictionStateOrProvinceName: 2, jurisdictionCountryName: 3 } },
 
   certExtension: { base: [2, 5, 29], of: {
     subjectDirectoryAttributes: 9,
@@ -339,7 +344,7 @@ var FAMILIES = Object.assign(Object.create(null), {
   nistKem: { base: [2, 16, 840, 1, 101, 3, 4, 4], of: {
     "id-ml-kem-512": 1, "id-ml-kem-768": 2, "id-ml-kem-1024": 3 } },
 
-  datatype: { base: [0, 9, 2342, 19200300, 100, 1], of: { domainComponent: 25 } },
+  datatype: { base: [0, 9, 2342, 19200300, 100, 1], of: { userId: 1, domainComponent: 25 } },
 
   fidoGenCe: { base: [1, 3, 6, 1, 4, 1, 45724, 1, 1], of: { idFidoGenCeAaguid: 4 } },
 

package/lib/pki-build.js

@@ -265,6 +265,27 @@ function _isDottedOid(s) {
 
 var b = asn1.build;
 
+/** @internal The distinguished-name attributes RFC 5280 App. A.1 types as something other than
+ *  DirectoryString, with the SIZE constraint the module states. Every other attribute is a
+ *  DirectoryString and takes UTF8String. A row here, not a branch, so a newly registered
+ *  attribute whose module entry names a type is a data addition. */
+var ATV_TYPE = intrinsic.assign(intrinsic.create(null), {
+  countryName: { encode: b.printable, tag: asn1.TAGS.PRINTABLE_STRING, size: [2, 2], what: "X520countryName, PrintableString SIZE(2)" },
+  jurisdictionCountryName: { encode: b.printable, tag: asn1.TAGS.PRINTABLE_STRING, size: [2, 2], what: "a jurisdiction country code, PrintableString SIZE(2)" },
+  distinguishedNameQualifier: { encode: b.printable, tag: asn1.TAGS.PRINTABLE_STRING, what: "X520dnQualifier, PrintableString" },
+  serialNumber: { encode: b.printable, tag: asn1.TAGS.PRINTABLE_STRING, size: [1, 64], what: "X520SerialNumber, PrintableString" },
+  emailAddress: { encode: b.ia5, tag: asn1.TAGS.IA5_STRING, size: [1, 255], what: "EmailAddress, IA5String" },
+  domainComponent: { encode: b.ia5, tag: asn1.TAGS.IA5_STRING, what: "DomainComponent, IA5String (RFC 4519 sec. 2.4)" },
+});
+
+/** @internal The DirectoryString CHOICE of RFC 5280 App. A.1. Every attribute the toolkit
+ *  publishes a short name for and does not give its own row above is valued as one, so a
+ *  pre-encoded value for one of them must be a member. An attribute with no published short
+ *  name has a syntax this toolkit does not claim to know, and its value stays opaque. */
+var DIRECTORY_STRING_TAGS = intrinsic.assign(intrinsic.create(null), {});
+[asn1.TAGS.TELETEX_STRING, asn1.TAGS.PRINTABLE_STRING, asn1.TAGS.UNIVERSAL_STRING,
+  asn1.TAGS.UTF8_STRING, asn1.TAGS.BMP_STRING].forEach(function (t) { DIRECTORY_STRING_TAGS[t] = 1; });
+
 var KU_BIT = intrinsic.assign(intrinsic.create(null), {
   digitalSignature: 0, nonRepudiation: 1, contentCommitment: 1, keyEncipherment: 2,
   dataEncipherment: 3, keyAgreement: 4, keyCertSign: 5, cRLSign: 6, encipherOnly: 7, decipherOnly: 8,
@@ -360,19 +381,55 @@ function makeBuilder(ctx) {
     return (y >= 1950 && y <= 2049) ? b.utcTime(date) : b.generalizedTime(date);
   }
 
-  function atvString(attrName, value) {
-    if (attrName === "countryName") {
-      if (String(value).length !== 2) throw E("bad-name", "countryName must be a two-letter ISO 3166 code (PrintableString SIZE(2))");
-      return b.printable(value);
+  function assertAtvValue(attrName, value) {
+    if (value == null || value === "") throw E("bad-name", "the " + attrName + " attribute value must be a non-empty string");
+    var row = ATV_TYPE[attrName];
+    if (!row || !row.size) return;
+    var len = _String(value).length;
+    if (len < row.size[0] || len > row.size[1]) {
+      throw E("bad-name", attrName + " must be " + (row.size[0] === row.size[1]
+        ? "exactly " + row.size[0] + " characters" : row.size[0] + " to " + row.size[1] + " characters") +
+        " (" + row.what + ", RFC 5280 App. A.1)");
     }
-    if (attrName === "emailAddress") return b.ia5(value);
-    return b.utf8(value);
+  }
+  function atvString(attrName, value) {
+    assertAtvValue(attrName, value);
+    var row = ATV_TYPE[attrName];
+    if (!row) return b.utf8(value);
+    return row.encode(value);
   }
   function encodeAtv(attrName, value) {
     if (value == null || value === "") throw E("bad-name", "the " + attrName + " attribute value must be a non-empty string");
     var typeOid = O(attrName);
     if (typeOid == null) throw E("bad-name", "unknown distinguished-name attribute " + guard.text.showValue(attrName));
     var valueTlv;
+    if (typeof value === "string" && _charCodeAt(value, 0) === 0x23) {
+      var raw = guard.encoding.hex(_sliceStr(value, 1), null, rawErr, ctx.prefix + "/bad-name", "a #hex attribute value");
+      guard.der.tlv(raw, rawErr, ctx.prefix + "/bad-name", "a #hex attribute value");
+      var rawNode = asn1.decode(raw);
+      var typeRow = ATV_TYPE[attrName];
+      var universalPrimitive = rawNode.tagClass === "universal" && !rawNode.constructed;
+      if (typeRow && (!universalPrimitive || rawNode.tagNumber !== typeRow.tag)) {
+        throw E("bad-name", "the " + attrName + " #hex value must be encoded as " + typeRow.what);
+      }
+      if (!typeRow && intrinsic.hasOwn(C.NAMES.DN_SHORT, attrName) &&
+          (!universalPrimitive || !DIRECTORY_STRING_TAGS[rawNode.tagNumber])) {
+        throw E("bad-name", "the " + attrName + " #hex value must be a DirectoryString: a TeletexString, PrintableString, UniversalString, UTF8String or BMPString (RFC 5280 App. A.1)");
+      }
+      var rawText;
+      try {
+        rawText = asn1.read.string(rawNode);
+      } catch (_e) {
+        rawText = null;
+      }
+      if (rawText !== null) {
+        try { atvString(attrName, rawText); }
+        catch (e) { if (e instanceof ErrorClass) throw e; throw E("bad-name", "the " + attrName + " #hex value carries characters invalid for that attribute's string type", e); }
+      }
+      return b.sequence([b.oid(typeOid), raw]);
+    }
+    if (typeof value === "string" && _charCodeAt(value, 0) === 0x5c) value = _sliceStr(value, 1);
+    if (value === "") throw E("bad-name", "the " + attrName + " attribute value must be a non-empty string");
     try { valueTlv = atvString(attrName, value); }
     catch (e) { if (e instanceof ErrorClass) throw e; throw E("bad-name", "the " + attrName + " value has characters invalid for its string type", e); }
     return b.sequence([b.oid(typeOid), valueTlv]);

package/lib/schema-pkix.js

@@ -403,7 +403,8 @@ function name(ns, opts) {
       _forEach(rdnItem.value.items, function (atvItem) {
         var a = atvItem.value.result;
         _push(atvs, a);
-        var label = (a.name && _hasOwn(DN_SHORT, a.name) && DN_SHORT[a.name]) || a.name || a.type;
+        var label = (a.name && _hasOwn(DN_SHORT, a.name) && DN_SHORT[a.name]) ||
+          (guard.name.isAttributeDescriptor(a.name) ? a.name : a.type);
         _push(atvParts, label + "=" + _dnDisplayValue(a.value));
       });
       _push(rdns, atvs);

package/lib/x509-sign.js

@@ -23,6 +23,9 @@ var signScheme = require("./sign-scheme");
 var guard = require("./guard-all");
 var intrinsic = require("./guard-intrinsic");
 var _isArray = intrinsic.isArray, _bufferEquals = intrinsic.bufferEquals;
+var _dnCharCodeAt = intrinsic.uncurry(String.prototype.charCodeAt);
+var _dnKeys = intrinsic.keys;
+var _dnHasOwn = intrinsic.hasOwn;
 var frameworkError = require("./framework-error");
 var schema = require("./schema-engine");
 var pkix = require("./schema-pkix");
@@ -788,4 +791,100 @@ function _extension(name, value, opts) {
   return _ext(row.oid, critical, valueDer);
 }
 
-module.exports = { sign: sign, randomSerial: randomSerial, extension: extension };
+/**
+ * @primitive  pki.x509.parseDn
+ * @signature  pki.x509.parseDn(dn) -> { rdns, dn, bytes }
+ * @since      0.8.2
+ * @status     stable
+ * @spec       RFC 4514
+ * @related    pki.x509.sign, pki.schema.x509.parse
+ *
+ * Read a distinguished-name string into the `Name` a builder takes, using the attribute names
+ * and value escaping of RFC 4514 sec. 2.4 and sec. 3. It is the inverse of the `dn` string
+ * every parsed name carries: `bytes` is the encoded `Name`, ready to hand to `pki.x509.sign`
+ * as a `subject` or `issuer`, and `dn` is the string re-emitted from what was read, which for
+ * a string this toolkit produced is the string it was given.
+ *
+ * Components are read in the order they are written, so the first one written is the first
+ * element of the encoded `Name`. That is the order every `dn` here is emitted in, and the
+ * order `openssl x509 -subject` prints. RFC 4514 sec. 2.1 specifies the opposite order, so a
+ * string from a directory tool that follows it names the components from last to first;
+ * reverse them before parsing one.
+ *
+ * The string form does not carry the ASN.1 string type of each value, so a parsed value takes
+ * the type this toolkit encodes that attribute with: `PrintableString` for `countryName`,
+ * `IA5String` for `emailAddress`, `UTF8String` otherwise. A name written by something that
+ * chose different types will re-encode to different bytes, which is why RFC 4514 sec. 2.4
+ * defines the `#`-prefixed hex form: a value given that way is the exact DER of the
+ * `AttributeValue` and round-trips byte for byte.
+ *
+ * Malformed input throws `x509/bad-dn`. A non-string throws `x509/bad-input`.
+ *
+ * `bytes` is raw `Name` DER, the form `spec.subject` and `spec.issuer` take alongside a string
+ * or an array of RDNs, so a name read from a string can be signed without rebuilding it.
+ *
+ * @example
+ *   var name = pki.x509.parseDn("C=US, O=Example Inc, CN=leaf");
+ *   name.rdns.length;               // -> 3
+ *   name.rdns[0][0].name;           // -> "countryName"
+ *   name.dn;                        // -> "C=US, O=Example Inc, CN=leaf"
+ *   Buffer.isBuffer(name.bytes);    // -> true
+ */
+function parseDn(dn) {
+  if (typeof dn !== "string") throw _err("x509/bad-input", "pki.x509.parseDn takes a distinguished-name string");
+  var components = guard.name.parseDnString(dn, _err, "x509/bad-dn", "the distinguished name");
+  var spec = [];
+  for (var i = 0; i < components.length; i++) {
+    var rdn = components[i], out = intrinsic.create(null);
+    for (var j = 0; j < rdn.length; j++) {
+      var atv = rdn[j];
+      var attrName;
+      try { attrName = _dnAttrName(atv.type); }
+      catch (e) {
+        if (e instanceof CertificateError && e.code === "x509/bad-dn") throw e;
+        throw _err("x509/bad-dn", "the distinguished name has an attribute type that does not resolve: " + guard.text.showValue(atv.type), e);
+      }
+      if (_dnHasOwn(out, attrName)) {
+        throw _err("x509/bad-dn", "the distinguished name repeats " + attrName + " inside one relative distinguished name");
+      }
+      out[attrName] = atv.hex === null ? _dnLiteralValue(atv.value) : "#" + atv.hex;
+    }
+    guard.list.append(spec, out);
+  }
+  var bytes, read;
+  try {
+    bytes = _b.encodeName(spec);
+    read = schema.walk(NAME_SCHEMA, asn1.decode(bytes), NS).result;
+  } catch (e) {
+    throw _err("x509/bad-dn", "the distinguished name does not encode: " + (e && e.message), e);
+  }
+  return { rdns: read.rdns, dn: read.dn, bytes: bytes };
+}
+
+function _dnAttrName(type) {
+  if (oid.isDottedDecimal(type)) {
+    var byOid = oid.name(type);
+    if (!byOid) throw _err("x509/bad-dn", "the distinguished name names an unregistered attribute OID " + type);
+    return byOid;
+  }
+  var wanted = guard.name.lowerAscii(type);
+  var shortNames = pkix.DN_SHORT;
+  var keys = _dnKeys(shortNames);
+  for (var i = 0; i < keys.length; i++) {
+    if (guard.name.lowerAscii(shortNames[keys[i]]) === wanted || guard.name.lowerAscii(keys[i]) === wanted) return keys[i];
+  }
+  var table = oid.all();
+  var dotted = _dnKeys(table);
+  for (var j = 0; j < dotted.length; j++) {
+    var registered = table[dotted[j]];
+    if (guard.name.lowerAscii(registered) === wanted) return registered;
+  }
+  throw _err("x509/bad-dn", "the distinguished name names an unknown attribute " + guard.text.showValue(type));
+}
+
+function _dnLiteralValue(value) {
+  var first = _dnCharCodeAt(value, 0);
+  return (first === 0x23 || first === 0x5c) ? "\\" + value : value;
+}
+
+module.exports = { sign: sign, randomSerial: randomSerial, extension: extension, parseDn: parseDn };

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@blamejs/pki",
-  "version": "0.8.1",
+  "version": "0.8.2",
   "description": "Pure-JavaScript PKI toolkit that owns its stack — X.509, ASN.1/DER, CMS, PQC-first.",
   "license": "Apache-2.0",
   "author": "blamejs contributors",
@@ -68,7 +68,9 @@
     "test": "node test/smoke.js",
     "lint": "eslint --max-warnings 0 .",
     "fuzz": "npm ci --prefix fuzz && npx --prefix fuzz jazzer fuzz/asn1-der.fuzz.js -- -max_total_time=60",
-    "gates": "node test/layer-0-primitives/codebase-patterns.test.js && node scripts/validate-source-comment-blocks.js && node scripts/check-api-snapshot.js && node scripts/check-spelling-consistency.js && node scripts/check-engine-floor.js",
+    "gates": "node test/layer-0-primitives/codebase-patterns.test.js && node scripts/validate-source-comment-blocks.js && node scripts/check-api-snapshot.js && node scripts/check-spelling-consistency.js && node scripts/check-engine-floor.js && node scripts/check-cve-vectors.js && node scripts/check-rfc-currency.js",
+    "check:cve-vectors": "node scripts/check-cve-vectors.js",
+    "check:rfc-currency": "node scripts/check-rfc-currency.js",
     "check:engine-floor": "node scripts/check-engine-floor.js",
     "check:spelling": "node scripts/check-spelling-consistency.js",
     "coverage": "c8 --include=lib/** --include=index.js --reporter=text-summary --reporter=lcov node test/smoke.js",

package/sbom.cdx.json

@@ -2,10 +2,10 @@
   "$schema": "http://cyclonedx.org/schema/bom-1.5.schema.json",
   "bomFormat": "CycloneDX",
   "specVersion": "1.5",
-  "serialNumber": "urn:uuid:e0552083-e17a-4a74-b1fc-ea82fcb57a1e",
+  "serialNumber": "urn:uuid:b0bab233-a055-413d-8f5b-3ed8a3f7a8c4",
   "version": 1,
   "metadata": {
-    "timestamp": "2026-09-19T23:58:45.411Z",
+    "timestamp": "2026-09-20T02:50:18.934Z",
     "lifecycles": [
       {
         "phase": "build"
@@ -19,14 +19,14 @@
       }
     ],
     "component": {
-      "bom-ref": "@blamejs/pki@0.8.1",
+      "bom-ref": "@blamejs/pki@0.8.2",
       "type": "application",
       "name": "pki",
-      "version": "0.8.1",
+      "version": "0.8.2",
       "scope": "required",
       "author": "blamejs contributors",
       "description": "Pure-JavaScript PKI toolkit that owns its stack — X.509, ASN.1/DER, CMS, PQC-first.",
-      "purl": "pkg:npm/%40blamejs/pki@0.8.1",
+      "purl": "pkg:npm/%40blamejs/pki@0.8.2",
       "properties": [],
       "externalReferences": [
         {
@@ -54,7 +54,7 @@
   "components": [],
   "dependencies": [
     {
-      "ref": "@blamejs/pki@0.8.1",
+      "ref": "@blamejs/pki@0.8.2",
       "dependsOn": []
     }
   ]