@blamejs/pki 0.7.41 → 0.7.43

package/CHANGELOG.md

@@ -4,6 +4,30 @@ All notable changes to `@blamejs/pki` are documented here. The format
 follows [Keep a Changelog](https://keepachangelog.com/en/1.1.0/); this
 project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+## v0.7.43 — 2026-09-12
+
+A CMP message carries the transaction fields a receiver requires.
+
+### Changed
+
+- pki.cmp.build fills a header transactionID or senderNonce the caller omits with 16 fresh random bytes, under every protection flavor, so a message built without them verifies on receipt; a KEM-protected message given no transactionID binds its derivation to the filled one. A senderNonce given under 128 bits is refused with cmp/bad-input. Explicit values travel verbatim, and a recipNonce is never filled.
+
+### Fixed
+
+- pki.scep.build refuses a transactionId carrying a character outside the PrintableString set (RFC 8894 sec. 3.2.1.1) with scep/bad-input naming the rule, where the codec's own asn1/bad-printable-string surfaced.
+
+## v0.7.42 — 2026-09-12
+
+An S/MIME message is signed only under a certificate a receiving agent accepts a mail signature from.
+
+### Changed
+
+- pki.smime.sign refuses, with smime/bad-signer-certificate, a signer certificate whose keyUsage extension asserts neither digitalSignature nor nonRepudiation (RFC 8550 sec. 4.4.2) or whose extendedKeyUsage extension carries neither emailProtection nor anyExtendedKeyUsage (sec. 4.4.4), naming the signer by position. A certificate that carries neither extension signs, as a reader presumes both key usage bits and any purpose for it. The rule is about the certificate the message carries: a key-only signer, which RFC 8550 sec. 3 permits where correspondents hold each other's certificates by other means, still signs, and the reader holds the certificate it supplies to the same rule. The signer descriptors are read once, so a certificate accessor answers the same certificate to this check and to the signing, and a sparse signer list is refused before it is traversed.
+
+### Fixed
+
+- The emailProtection requirement pki.smime.verify applies to a trusted signer is cited to RFC 8550 sec. 4.4.4, the certificate-handling specification, in the README and the reference; it was cited to RFC 8551.
+
 ## v0.7.41 — 2026-09-12
 
 A delivered or archived private key is proven the private half of its certificate with the key itself.

package/README.md

@@ -235,12 +235,12 @@ comment blocks, is at [pkijs.com](https://pkijs.com).
 | `pki.csr` | PKCS#10 certification-request issuance (RFC 2986 / RFC 2985). `sign(spec, key, opts)` builds and signs a `CertificationRequest` from a `spec` of subject (which may be empty), the public key being certified, an optional `extensionRequest` carrying the requested v3 extensions a CA copies into the issued certificate (subject alternative names, key usage, extended key usage, basic constraints, certificate policies, subject key identifier, the RFC 3739 qualified-certificate statements, the Microsoft certificate template and application policies, subject information access, subject directory attributes, or an array of pre-encoded Extension DER; an extension the issuing CA assigns, such as the authority key identifier or the OCSP no-check marker, is refused by name rather than requested), and an optional `challengePassword`. `key` (or `{ key }`) is the subject's own private key: the request is self-signed to prove possession of the private half of `subjectPublicKey`, and that proof is verified before the request is returned, which is what `openssl req -verify` checks. The signature algorithm is resolved from the subject key, so RSA (PKCS#1 v1.5 or PSS via `opts.pss`), ECDSA, EdDSA, ML-DSA, SLH-DSA, and the composite arms all sign without a per-algorithm branch. Returns DER, or a PEM `CERTIFICATE REQUEST` with `opts.pem`; malformed input throws a typed `CsrError`. `verify(request)` asks the same question of a request someone else produced, over its exact signed `certificationRequestInfo` bytes under the `subjectPKInfo` inside them, through the one path-validation signature engine. It answers `{ verified, subject, subjectPublicKeyInfo, attributes, certificationRequestInfoBytes }`, all re-derived from the signed bytes, so a CA issues from the fields the signature covers rather than from the object it passed in. A `verified: true` says the producer held that private key and that the subject and requested extensions are the ones they signed; who they are is the enrollment protocol's question, not this one. Parsing stays at `pki.schema.csr.parse` — `sign`, `verify` |
 | `pki.attrcert` | Attribute-certificate issuance (RFC 5755). `sign(spec, issuer, opts)` builds and signs an `AttributeCertificate` as an Attribute Authority: a `spec` of `holder` (exactly one of an entity name, a `baseCertificateID` reference, a `fromCertificate` binding, or an object digest), the validity window as GeneralizedTime, an optional serial (positive, at most 20 octets, randomly generated when omitted), the `attributes` (role, clearance, group, chargingIdentity, accessIdentity, authenticationInfo, or pre-encoded Attribute DER), and optional `extensions` (auditIdentity, targetInformation, noRevAvail, aaControls, acProxying, authorityKeyIdentifier, cRLDistributionPoints, authorityInfoAccess, or pre-encoded Extension DER) each with its RFC 5755 criticality. The authorityKeyIdentifier is emitted without being named (sec. 4.3.3) and holds the AA certificate's subject key identifier; both extension forms are held to the rules sec. 4.3 and 4.4 place on the issuer (an audit identity of 1 to 20 octets, one Targets element and no targetCert, an OCSP location that is an HTTP URL, one distribution point naming a single DN or HTTP / LDAP URL, a role name that is a URI). An attribute certificate is never self-signed, so the `issuer` is the signing AA, supplied as `{ cert, key }` or `{ name, publicKey, key }`. The signature algorithm is resolved from the AA key, so RSA (PKCS#1 v1.5 or PSS via `opts.pss`), ECDSA, EdDSA, ML-DSA, SLH-DSA, and the composite arms all sign without a per-algorithm branch, and the signature is verified under the AA public key before the certificate is returned. Returns DER, or a PEM `ATTRIBUTE CERTIFICATE` with `opts.pem`; malformed input throws a typed `AttrCertError`. `verify(ac, issuer, opts)` is the receiving side, performing the RFC 5755 sec. 5 checks an attribute certificate and a named issuer can settle between them: the signature over the exact `AttributeCertificateInfo` bytes through the one path-validation signature engine, the AC naming the issuer this verifier trusts (compared as a distinguished name), the evaluation instant lying within the validity with equality at either bound succeeding as the section states, the sec. 4.3.2 targeting rule, and rejection of any critical extension this verb does not process (section 5 defines support as parsing the value AND rejecting where the value would reject, so `aaControls` and `acProxying`, whose constraints it does not evaluate, are refused when critical). It answers `{ verified, signatureValid, validityChecked, targetingChecked, holderBindingChecked, issuerPathChecked, holder, issuer, attributes, extensions, notBefore, notAfter, serialNumberHex, reason }` with the fields re-derived from the signed bytes; the holder's own certificate chain and the AC issuer's chain need certificates the verb is not given, so those slots report `false` rather than letting their absence read as a pass. Parsing stays at `pki.schema.attrcert.parse` — `sign`, `verify` |
 | `pki.crmf` | Certificate-request-message issuance (RFC 4211). `build(spec, key, opts)` assembles a `CertReqMessages` from a `spec` of `certReqId` (default 0, with the RFC 9483 `-1` sentinel allowed), a `certTemplate` of the requested fields (`subject`, `publicKey` as the SPKI DER of the key being certified, `validity`, requested `extensions`, an optional `version` 2), optional `controls` and `regInfo` (regToken, authenticator, utf8Pairs, oldCertID, protocolEncrKey, or pre-encoded `AttributeTypeAndValue` DER), and an optional `pop` selector. `key` (or `{ key }`) is the requester's private key: the message carries a `POPOSigningKey` proof of possession signed with the private half of `certTemplate.publicKey` and verified before the message is returned, exactly as a PKCS#10 CSR proves possession. A complete template signs the `CertRequest`; an incomplete one signs a `POPOSigningKeyInput`. The signature algorithm is resolved from the requested public key, so RSA (PKCS#1 v1.5 or PSS via `opts.pss`), ECDSA, EdDSA, ML-DSA, SLH-DSA, and the composite arms all sign without a per-algorithm branch. `key` is optional for a `raVerified` proof. A key that cannot sign, which is where an ML-KEM enrollment sits, takes a `POPOPrivKey` proof instead (RFC 4211 sec. 4.2, sec. 4.3): `pop.type` of `keyEncipherment` or `keyAgreement` with `pop.method: 'subsequentMessage'` declares whether an encrypted certificate (`encrCert`) or a challenge (`challengeResp`) completes the proof over the enrolling protocol's next exchange, and `pop.method: 'encryptedKey'` encloses the requester's private key for the CA in a CMS `EnvelopedData` under `id-ct-encKeyWithID`, requiring `pop.privateKey`, `pop.recipients`, the `pop.identifier` sec. 4.2.1 makes mandatory, and `pop.archive: true` because RFC 9810 sec. 5.2.8.3.1 permits the method only where archival is intended. The enclosed key must be the private half of `certTemplate.publicKey`, or the proof demonstrates possession of a key the request never asked to have certified. The `thisMessage` and `dhMAC` alternatives the specification deprecates are refused with their successors named. `pop.method: 'agreeMAC'` completes the four: `pop.key` is the requester's finite-field Diffie-Hellman private key, as a PKCS#8 DER, a PEM `PRIVATE KEY` block or a `KeyObject`, and `pop.caCert` the authority's certificate it already holds; the two agree a static secret (RFC 2875 sec. 3), and the key derived from it MACs the DER `certReq` under `id-dhPop-static-HMAC-SHA1`. Either key may name its group in the PKCS#3 or the X9.42 encoding. `pop.key` must be the private half of `certTemplate.publicKey`, and the template must name both a subject and a public key. Pass an array of specs for a batch; the CA-assigned template fields are never emitted. Returns DER, or a PEM block with `opts.pem`; malformed input throws a typed `CrmfError`. `verifyPop(messages)` is the receiving side: for each `CertReqMsg` it verifies the `POPOSigningKey` signature over the bytes RFC 4211 sec. 4.1 names — the DER of `poposkInput` when present, of `certReq` when not — through the one path-validation signature engine, and answers `{ verified, messages: [{ verified, method, cryptographicallyVerified, certReqId, subject, subjectBound, publicKey, reason }] }` with the fields re-derived from the message's own bytes. Each verdict reports only what its preimage covers: `publicKey` is the key possession was proven for, and `subject` is the requested name when the `certReq` was signed. A `poposkInput` preimage covers the key and the sender alone, so any subject beside it is unsigned and is withheld with `subjectBound: false`. A `raVerified` proof is an RA's out-of-band assertion and a `keyEncipherment` or `keyAgreement` proof completes over a later exchange, so each is reported unverified with its `method` named instead of guessed. Parsing stays at `pki.schema.crmf.parse` — `build`, `verifyPop` |
-| `pki.cmp` | CMP message building, transfer, and verification (RFC 9810). `build(message, opts)` assembles a protected `PKIMessage`. `message.header` carries the `sender` and `recipient` GeneralNames (including the anonymous NULL-DN) plus optional transaction metadata; `message.body` is a single-key object naming the arm — request-side `ir`, `cr`, `kur`, `krr` (key recovery, §5.3.7), `ccr` (cross-certification, §5.3.11: a `CertReqMessages` at the normative floor, where the requesting CA keeps its private key so a private-key-transport encryptedKey proof-of-possession is refused, and the optional App. D.6 single-request cardinality is not enforced), `p10cr`, `certConf`, `pollReq`, `genm`, `rr`, responder-side `ip`, `cp`, `kup`, `ccp`, `rp`, `genp`, `error`, `pollRep`, `krp`, `pkiconf`, and the registration-authority `nested` wrapper of complete PKIMessages (RFC 9810 §5.1.3.5). Protection is exactly one of `opts.{ key, cert }`, a signature under the sender key with the algorithm resolved from the signer certificate so RSA (PKCS#1 v1.5 / PSS), ECDSA, EdDSA, ML-DSA, SLH-DSA, and the composite arms all sign without a per-algorithm branch, `opts.mac`, a PBMAC1 shared-secret HMAC (RFC 9481 / 9579, PBKDF2-derived), or `opts.kem`, a KEM-based MAC for a client whose key can only establish secrets (RFC 9810 §5.1.3.4): the ciphertext a peer encapsulated to its ML-KEM key is decapsulated, the key is derived under HKDF-SHA256 with a context bound to the transaction identifier of the message that carried the ciphertext, and `pki.cmp.verify` checks it from the shared secret. Protection covers the exact DER of the virtual `ProtectedPart` and is self-verified before the message is returned, and `protectionAlg` is derived rather than caller-set, so the message the parser accepts is coherent by construction. A `p10cr` request's PKCS#10 proof-of-possession is verified before the message is protected, so one whose self-signature does not verify under its subject public key is refused rather than sent. `transfer(url, message, opts)` carries a built message to a CMP endpoint over `pki.transport` (RFC 9811): one POST of the DER PKIMessage, with the response classified fail-closed — 200 only for success, a non-200 2xx or an un-followed 3xx refused, a 4xx or 5xx carrying a CMP error PKIMessage forwarded as the integrity-protected verdict — and protection surfaced rather than verified. `wellKnownUrl(base, opts)` builds the §3.4 `/.well-known/cmp` request-URIs. `verify(message, opts)` checks the protection on an incoming message, either a signature through the same certification-path engine `pki.crl.verify` and `pki.ocsp.verify` use, with the EdDSA low-order-point and algorithm-confusion gates, or a PBMAC1 MAC recomputed from `opts.sharedSecret` and the message's own PBKDF2 parameters and constant-time compared, over the exact `ProtectedPart` reconstructed from the parser's raw slices. It is fail-closed on an unprotected message, a MAC algorithm it does not compute (reported as MAC-protected under that algorithm, never as a failed signature), an omitted keyLength, or a SHA-1 PRF, and returns a `{ valid, trusted, protectionType, signer, ... }` verdict. With `opts.trustAnchors` the signer certificate is fully path-validated (RFC 5280 §6.1 plus the RFC 9483 §3.2 `keyUsage.digitalSignature` gate) at a trusted current time, or an explicit `opts.time` for historical verification and never the message's self-asserted `messageTime`, before it is reported trusted; without one the verdict is crypto-only and the signer certificate is surfaced to anchor. `session(opts)` returns a stateful enrollment session whose `enroll(request)` drives a full `ir` / `cr` / `kur` / `p10cr` transaction over the shared transport, composing `build`, `transfer`, and `verify`. Every response is protection-verified, signer-trusted, and bound to the exchange (a stable `transactionID`, a fresh-`senderNonce` and echoed-`recipNonce` chain) before its body is read, with a bounded `pollReq` / `pollRep` loop for a `waiting` status and a `certConf` / `pkiConf` (or implicit) confirmation carrying an explicit `hashAlg` for a signature algorithm that does not convey its hash. It returns a terminal `{ outcome, certificate, chain, status, trusted, confirmed, implicitConfirm, transactionID, polls, transcript }`. A certification authority can take longer to answer than a process is held open, so a `poll-timeout` carries a `resumeToken` and `resumePoll(token)` continues the same transaction in a later process: the token is plain JSON naming the transaction, the nonce the next request echoes, the polled request and the arm its grant arrives on, and the key the grant must certify. It carries no secret and grants nothing, since the protection material and the endpoint come from the session built to resume with, and the resumed poll verifies, nonce-binds, and key-binds every response. Its fields are what the resumed exchange is held to, so store it where the enrollment's own state is stored: someone who can rewrite it can widen what the resumed session accepts, as far as that session's trust anchors and the authority's protection allow and no further. The same session also drives the other two RFC 9483 operations under that shell: `revoke(request)` sends an `rr` naming a certificate as `{ certificate }` or `{ certDetails }` with an optional CRLReason `reason`, and returns `revoked` / `rejected` / `poll-timeout`; `info(request)` sends a `genm` for one of the four support messages — `{ caCerts }`, `{ rootCaCert }`, `{ certReqTemplate }`, `{ crlUpdate }` — and returns `answered` with the decoded `value` and a `present` flag, since an absent response value is how each says nothing is available. A session revokes its own certificate: the signature over the request is the proof of authorization (§4.2), so the named certificate must be `opts.cert` and a PBMAC1 session is refused. The signature flavor requires `opts.trustAnchors` to authenticate the CA; a verified rejection or error and an exhausted poll budget are terminal verdicts, while a tampered, untrusted, or desynchronized response is a typed throw. Returns DER, or a PEM `CMP` block with `opts.pem`; malformed input throws a typed `CmpError`. `openKeyPackage(container, opts)` opens a private key the CA generated centrally and delivered in the `privateKey` field of a granted `CertifiedKeyPair` (RFC 9483 §4.1.6): a CMS `SignedData` over an RFC 5958 `AsymmetricKeyPackage`, sealed in a CMS `EnvelopedData`. `opts.key` (with `opts.cert`) opens the key transport and key agreement containers a signature-protected request selects, `opts.password` the password container a MAC-protected request selects. The authority is authorized before any key material is returned: its certificate must chain to an anchor in `opts.trustAnchors` AND assert the `id-kp-cmKGA` extended key usage, since a certificate with no `extendedKeyUsage` permits every purpose and so authorizes nothing; `opts.authorizedBySharedSecret` states §4.1.6's exemption for an entity that authorizes by the secret that protected its request. Returns `{ keys, kga, trusted }`, where each key is a PKCS#8 `PrivateKeyInfo` ready for `pki.key.import`; `keys` is the whole RFC 5958 `AsymmetricKeyPackage` (`SIZE (1..MAX)`), while a session enrollment requires the sequence of one §4.1.6 profiles it to. Both CMS layers are read as a ContentInfo or as the bare structure, told apart by what the SEQUENCE opens with. `session(opts)` drives the whole exchange under `opts.acceptCentralKeyGeneration`: the request omits `certTemplate.publicKey`, carries no proof of possession, and goes out as `cmp2021`; the session opens the delivered container with the credential it enrolled under and surfaces it as `deliveredKey`, having first checked that the issued certificate certifies the delivered key. Without the option, such a request and such a grant are both refused. Parsing stays at `pki.schema.cmp.parse` — `build`, `transfer`, `wellKnownUrl`, `verify`, `openKeyPackage`, `session` |
+| `pki.cmp` | CMP message building, transfer, and verification (RFC 9810). `build(message, opts)` assembles a protected `PKIMessage`. `message.header` carries the `sender` and `recipient` GeneralNames (including the anonymous NULL-DN) plus optional transaction metadata; a `transactionID` or `senderNonce` the caller omits is filled with 16 fresh random bytes (RFC 9810 §5.1.1, the width a receiver requires under RFC 9483 §3.5), and a `senderNonce` given under 128 bits is refused; `message.body` is a single-key object naming the arm — request-side `ir`, `cr`, `kur`, `krr` (key recovery, §5.3.7), `ccr` (cross-certification, §5.3.11: a `CertReqMessages` at the normative floor, where the requesting CA keeps its private key so a private-key-transport encryptedKey proof-of-possession is refused, and the optional App. D.6 single-request cardinality is not enforced), `p10cr`, `certConf`, `pollReq`, `genm`, `rr`, responder-side `ip`, `cp`, `kup`, `ccp`, `rp`, `genp`, `error`, `pollRep`, `krp`, `pkiconf`, and the registration-authority `nested` wrapper of complete PKIMessages (RFC 9810 §5.1.3.5). Protection is exactly one of `opts.{ key, cert }`, a signature under the sender key with the algorithm resolved from the signer certificate so RSA (PKCS#1 v1.5 / PSS), ECDSA, EdDSA, ML-DSA, SLH-DSA, and the composite arms all sign without a per-algorithm branch, `opts.mac`, a PBMAC1 shared-secret HMAC (RFC 9481 / 9579, PBKDF2-derived), or `opts.kem`, a KEM-based MAC for a client whose key can only establish secrets (RFC 9810 §5.1.3.4): the ciphertext a peer encapsulated to its ML-KEM key is decapsulated, the key is derived under HKDF-SHA256 with a context bound to the transaction identifier of the message that carried the ciphertext, and `pki.cmp.verify` checks it from the shared secret. Protection covers the exact DER of the virtual `ProtectedPart` and is self-verified before the message is returned, and `protectionAlg` is derived rather than caller-set, so the message the parser accepts is coherent by construction. A `p10cr` request's PKCS#10 proof-of-possession is verified before the message is protected, so one whose self-signature does not verify under its subject public key is refused rather than sent. `transfer(url, message, opts)` carries a built message to a CMP endpoint over `pki.transport` (RFC 9811): one POST of the DER PKIMessage, with the response classified fail-closed — 200 only for success, a non-200 2xx or an un-followed 3xx refused, a 4xx or 5xx carrying a CMP error PKIMessage forwarded as the integrity-protected verdict — and protection surfaced rather than verified. `wellKnownUrl(base, opts)` builds the §3.4 `/.well-known/cmp` request-URIs. `verify(message, opts)` checks the protection on an incoming message, either a signature through the same certification-path engine `pki.crl.verify` and `pki.ocsp.verify` use, with the EdDSA low-order-point and algorithm-confusion gates, or a PBMAC1 MAC recomputed from `opts.sharedSecret` and the message's own PBKDF2 parameters and constant-time compared, over the exact `ProtectedPart` reconstructed from the parser's raw slices. It is fail-closed on an unprotected message, a MAC algorithm it does not compute (reported as MAC-protected under that algorithm, never as a failed signature), an omitted keyLength, or a SHA-1 PRF, and returns a `{ valid, trusted, protectionType, signer, ... }` verdict. With `opts.trustAnchors` the signer certificate is fully path-validated (RFC 5280 §6.1 plus the RFC 9483 §3.2 `keyUsage.digitalSignature` gate) at a trusted current time, or an explicit `opts.time` for historical verification and never the message's self-asserted `messageTime`, before it is reported trusted; without one the verdict is crypto-only and the signer certificate is surfaced to anchor. `session(opts)` returns a stateful enrollment session whose `enroll(request)` drives a full `ir` / `cr` / `kur` / `p10cr` transaction over the shared transport, composing `build`, `transfer`, and `verify`. Every response is protection-verified, signer-trusted, and bound to the exchange (a stable `transactionID`, a fresh-`senderNonce` and echoed-`recipNonce` chain) before its body is read, with a bounded `pollReq` / `pollRep` loop for a `waiting` status and a `certConf` / `pkiConf` (or implicit) confirmation carrying an explicit `hashAlg` for a signature algorithm that does not convey its hash. It returns a terminal `{ outcome, certificate, chain, status, trusted, confirmed, implicitConfirm, transactionID, polls, transcript }`. A certification authority can take longer to answer than a process is held open, so a `poll-timeout` carries a `resumeToken` and `resumePoll(token)` continues the same transaction in a later process: the token is plain JSON naming the transaction, the nonce the next request echoes, the polled request and the arm its grant arrives on, and the key the grant must certify. It carries no secret and grants nothing, since the protection material and the endpoint come from the session built to resume with, and the resumed poll verifies, nonce-binds, and key-binds every response. Its fields are what the resumed exchange is held to, so store it where the enrollment's own state is stored: someone who can rewrite it can widen what the resumed session accepts, as far as that session's trust anchors and the authority's protection allow and no further. The same session also drives the other two RFC 9483 operations under that shell: `revoke(request)` sends an `rr` naming a certificate as `{ certificate }` or `{ certDetails }` with an optional CRLReason `reason`, and returns `revoked` / `rejected` / `poll-timeout`; `info(request)` sends a `genm` for one of the four support messages — `{ caCerts }`, `{ rootCaCert }`, `{ certReqTemplate }`, `{ crlUpdate }` — and returns `answered` with the decoded `value` and a `present` flag, since an absent response value is how each says nothing is available. A session revokes its own certificate: the signature over the request is the proof of authorization (§4.2), so the named certificate must be `opts.cert` and a PBMAC1 session is refused. The signature flavor requires `opts.trustAnchors` to authenticate the CA; a verified rejection or error and an exhausted poll budget are terminal verdicts, while a tampered, untrusted, or desynchronized response is a typed throw. Returns DER, or a PEM `CMP` block with `opts.pem`; malformed input throws a typed `CmpError`. `openKeyPackage(container, opts)` opens a private key the CA generated centrally and delivered in the `privateKey` field of a granted `CertifiedKeyPair` (RFC 9483 §4.1.6): a CMS `SignedData` over an RFC 5958 `AsymmetricKeyPackage`, sealed in a CMS `EnvelopedData`. `opts.key` (with `opts.cert`) opens the key transport and key agreement containers a signature-protected request selects, `opts.password` the password container a MAC-protected request selects. The authority is authorized before any key material is returned: its certificate must chain to an anchor in `opts.trustAnchors` AND assert the `id-kp-cmKGA` extended key usage, since a certificate with no `extendedKeyUsage` permits every purpose and so authorizes nothing; `opts.authorizedBySharedSecret` states §4.1.6's exemption for an entity that authorizes by the secret that protected its request. Returns `{ keys, kga, trusted }`, where each key is a PKCS#8 `PrivateKeyInfo` ready for `pki.key.import`; `keys` is the whole RFC 5958 `AsymmetricKeyPackage` (`SIZE (1..MAX)`), while a session enrollment requires the sequence of one §4.1.6 profiles it to. Both CMS layers are read as a ContentInfo or as the bare structure, told apart by what the SEQUENCE opens with. `session(opts)` drives the whole exchange under `opts.acceptCentralKeyGeneration`: the request omits `certTemplate.publicKey`, carries no proof of possession, and goes out as `cmp2021`; the session opens the delivered container with the credential it enrolled under and surfaces it as `deliveredKey`, having first checked that the issued certificate certifies the delivered key. Without the option, such a request and such a grant are both refused. Parsing stays at `pki.schema.cmp.parse` — `build`, `transfer`, `wellKnownUrl`, `verify`, `openKeyPackage`, `session` |
 | `pki.crl` | CRL issuance and verification (RFC 5280 §5). `sign(spec, issuer, opts)` builds and signs a `CertificateList` from a `spec` of `thisUpdate` and `nextUpdate`, an optional `crlNumber`, a `revoked` array (each entry a `serialNumber` and `revocationDate` with an optional `reason` or `invalidityDate`), and an optional `extensions` object (authority key identifier, issuer alternative name, issuing distribution point, delta-CRL indicator, freshest CRL, authority information access, which is every extension RFC 5280 §5.2 defines) or an array of pre-encoded Extension DER, with an `issuer` of `{ cert, key }` or `{ name, publicKey, key }`. The authority key identifier is emitted on every CRL whether or not it is named, as §5.2.1 places it on every conforming issuer, from the issuer certificate's SKI or the issuer key. The signature algorithm is resolved from the issuer key, so RSA (PKCS#1 v1.5 or PSS via `opts.pss`), ECDSA, EdDSA, ML-DSA, SLH-DSA, and the composite arms all sign without a per-algorithm branch. The version is derived from the extension set (v2 when any CRL or entry extension is present, else v1), the outer `signatureAlgorithm` matches `tbsCertList.signature`, an empty revocation list omits the field rather than emitting an empty SEQUENCE, `reasonCode` is an ENUMERATED and `invalidityDate` is always GeneralizedTime, the RFC fixes per-extension criticality, and the produced signature is verified under the issuer key before return. `verify(crl, issuer)` checks a CRL signature through the one path-validation signature engine, algorithm-confusion and EdDSA low-order gates included; handed a certificate rather than a bare key it also asks what only a certificate can answer — that the certificate is the issuer the CRL names, and that its `keyUsage`, when present, asserts `cRLSign` — so a CRL minted under an end-entity certificate of the same CA does not verify as that CA's. `isRevoked(crl, serialNumber, opts)` looks a serial up, and first checks that the CRL is one a serial can be looked up in at all — it is handed a serial and nothing else, so a CRL that speaks for part of its issuer's certificates is refused rather than answered from. A delta CRL lists changes since a base, so an entry recording a release reads as a revocation when read alone; an indirect CRL carries other issuers' entries, whose serials are unrelated to yours; and any other `issuingDistributionPoint` narrows the CRL to one distribution point, one kind of certificate, or a subset of revocation reasons, none of which a serial can be matched against. A CRL speaks for a span as well as a set, so `opts.time` states the instant the question is asked at and a list that has stopped speaking for it — `nextUpdate` passed, `thisUpdate` later, or no `nextUpdate` stated at all — is refused rather than read as a clean bill of health; without `opts.time` the lookup is structural and an absent serial means only that it is not on that list. `pki.path.crlChecker` is the verb for all of them: it is handed the certificate, merges a delta with its base, performs the §6.3.3 correspondence, and decides currency against the material it fetched. Returns DER, or a PEM `X509 CRL` with `opts.pem`; malformed input throws a typed `CrlError`. Parsing stays at `pki.schema.crl.parse` — `sign`, `verify`, `isRevoked` |
 | `pki.key` | Key-material lifecycle (RFC 5958 / RFC 8018). `encrypt(privateKey, password, opts)` wraps a PKCS#8 private key (DER, PEM, or an extractable `CryptoKey`) into an `EncryptedPrivateKeyInfo` under PBES2 (PBKDF2 with AES-CBC-Pad), where `opts` selects the `cipher` (`aes-256-cbc` default, `aes-192-cbc`, `aes-128-cbc`), the `prf` (`hmacWithSHA256` default, SHA-384/512, SHA-1), the `iterations` (default 600000), and the `salt`. The plaintext is validated as PKCS#8 before encryption, a default `prf` and `keyLength` are omitted so the parameters are byte-exact with OpenSSL, and the output is re-parsed before return. `decrypt(encrypted, password, opts)` recovers the inner `PrivateKeyInfo`, re-validated through `pki.schema.pkcs8.parse`: only PBES2 / PBKDF2 / AES-CBC is accepted (PBES1, PBMAC1, and scrypt are refused), the salt and iteration count are bounded before any derivation (`opts.maxIterations` lowers the cap), and a malformed parameter set or wrong-length IV is a distinct typed error. Because a MAC-less PBES2-CBC decrypt must not become a padding oracle (RFC 8018 §8), a wrong password and a valid-pad-but-not-a-key both surface the one uniform `key/decrypt-failed`. `export(key, opts)` and `import(input, opts)` move a private key as PKCS#8 or a public key as SubjectPublicKeyInfo. The key may come from the platform's WebCrypto or from a separately installed copy of this toolkit, and is exported through whichever holds its material; a non-extractable key, or one whose implementation keeps its material out of reach, is refused with that as the reason. Encoding is delegated to WebCrypto, so RSA carries an explicit NULL, EC a named curve, and Ed25519/Ed448/X25519/X448 omit parameters, and an ambiguous RSA or EC import requires `opts.algorithm`. `generate(algorithm, opts)` produces a key pair over RSA, ECDSA/ECDH, the Edwards and Montgomery curves, and the FIPS post-quantum ML-DSA and ML-KEM; `publicFromPrivate(privateKey)` derives the public key. Returns DER or PEM, with a typed `KeyError` on failure. Parsing stays at `pki.schema.pkcs8.parse` — `encrypt`, `decrypt`, `export`, `import`, `generate`, `publicFromPrivate` |
 | `pki.pkcs12` | PKCS#12 (.p12/.pfx) issuance and reading (RFC 7292 / RFC 9579). `build(spec, opts)` assembles a store from the OpenSSL-style `{ key, cert, ca?, friendlyName?, localKeyId? }` or the full `{ safeContents: [...] }`, where each element is a plaintext or PBES2-encrypted `SafeContents` of key, shroudedKey, cert, crl, secret, or nested `safeContents` bags. Keys and certs are validated before wrapping, a key paired with a certificate (the `{ key, cert }` form, or bags sharing a `localKeyId`) must be the private half of that certificate's public key, and `friendlyName` (BMPString) and `localKeyId` are single-value. Integrity is a classic Appendix B HMAC (the default, for maximum interoperability) or an RFC 9579 PBMAC1 (`opts.mac.algorithm`) over SHA-256/384/512, with shrouded keys and cert safes encrypted under RFC 8018 PBES2 (AES-128/192/256-CBC). Every password is encoded the PKCS#12 way — BMPString+NULL for the classic MAC, UTF-8 for the PBES2 bags and PBMAC1 — which is what OpenSSL and NSS consume, so a file it emits opens in both, cross-checked bidirectionally. The MAC covers the exact AuthenticatedSafe byte range, a DEFAULT-1 `MacData.iterations` is rejected up front, and the store is re-parsed before return. `verifyMac(pfx, password, opts)` recomputes a classic or PBMAC1 MAC over `macedBytes` and constant-time-compares it, throwing on a MAC-less or public-key-integrity store. Public-key integrity (`opts.integrity.mode: "public-key"`) wraps the AuthenticatedSafe in a CMS SignedData instead of a MAC, signed by any `pki.cms.sign` signer and carrying no MacData (§4); privacy stays independent, so `password` still PBES2-encrypts the bags. Public-key privacy wraps a SafeContents as a CMS EnvelopedData (AES-CBC, `id-envelopedData`, never GCM) encrypted to recipient public keys through the `pki.cms.encrypt` recipient model, via per-safe `recipients` or the `opts.recipientCerts` convenience, restricted to certificate recipients (RSA-OAEP, ECDH, X25519, X448, ML-KEM) since a password or KEK recipient could not be reopened by `open`. All four integrity-by-privacy combinations are permitted (§3.1). `open(pfx, password, opts)` reads a store back: it verifies the MAC first, so a wrong password is the MAC verdict rather than a decrypt error, then PBES2-decrypts every privacy safe and shrouded key bag and returns `{ integrityMode, macVerified, signers, keys, certs, crls, secrets }` — keys as re-validated PKCS#8 DER, certs, CRLs and secrets as raw DER, all with `friendlyName` and `localKeyId`, nested safes recursively. A MAC-less store is refused unless `opts.allowUnauthenticated`. A public-key-integrity store is verified through its CMS SignedData signature first (`pkcs12/signature-invalid` on failure), with the signer surfaced in `signers` but never trust-chained, which remains the caller's `pki.path.validate` step. A legacy-PBE store's Appendix C 3DES and RC2 bags are decrypted, RC2 through an in-tree RFC 2268 cipher, so an `openssl pkcs12 -legacy` or NSS store opens; the legacy RC4 schemes are refused. An `id-envelopedData` safe is decrypted with `opts.recipientKey` after the integrity gate (`pkcs12/no-recipient-key` when absent), every recipient-side fault and every post-integrity decrypt failure collapsing to the uniform `pkcs12/decrypt-failed`, and `opts.keys: 'crypto'` imports each key to a `CryptoKey`. It reads what OpenSSL and NSS produce. Returns DER or a PEM `PKCS12`, with a typed `Pkcs12Error` on failure. Parsing stays at `pki.schema.pkcs12.parse` — `build`, `verifyMac`, `open` |
 | `pki.cms` | CMS signing, verification, encryption, and compression (RFC 5652). `sign(content, signers, opts)` produces a SignedData (§5), attached or detached, with one or many signers over RSA, RSASSA-PSS, ECDSA, EdDSA, the post-quantum ML-DSA-44/65/87 (RFC 9882) and SLH-DSA (all twelve FIPS 205 sets, RFC 9814), and composite ML-DSA pairing ML-DSA with a traditional RSA, ECDSA, or EdDSA key (accepted only when both components verify, draft-ietf-lamps-cms-composite-sigs). It builds the signed attributes (content-type, message-digest, signing-time) as canonical DER, signs the exact §5.4 preimage, and emits a DER `Buffer` or PEM. The content may also be an async iterable of byte chunks, which signs a large detached payload without holding it in memory: the payload is hashed incrementally under every signer's digest algorithm in one pass, and `verify` accepts the same streamed form as its `content` option. A signer may also be key-only — `{ key, spki, keyIdentifier }` with no certificate — which RFC 5272 §3.2 requires when a Full PKI Request's signer is the key of a certification request that request carries: the signer identifier takes the subjectKeyIdentifier form carrying the identifier the request declares, the signature scheme resolves from the request's own public key, and no certificate is embedded. `verify(input, opts)` parses a SignedData over the strict `pki.schema.cms` codec, locates each SignerInfo's signer certificate by its issuerAndSerialNumber or subjectKeyIdentifier, and checks the signature over the exact §5.4 preimage: with signed attributes present it confirms the message-digest attribute equals the content digest and verifies over the DER re-encoding of the SignedAttributes (the on-wire `[0]` tag replaced by a universal SET OF), and otherwise directly over the content. It returns a per-signer verdict with the matched signer certificate. `valid` and `trusted` are separate claims and neither implies the other: a SignedData carries its own certificates, so `valid` says the signature is sound under one of them and nothing about who signed, while `trusted` says every signer chained to a root named in `opts.trustAnchors`, validated through the same RFC 5280 path engine `pki.path.validate` uses. Without anchors there is nothing to chain to and `trusted` is `false`; anchors that cannot be read throw, rather than reading as untrusted. An unrecognized option is refused rather than ignored. `countersign(cms, signers, opts)` adds a countersignature (§11.4) — a `SignerInfo` over the countersigned SignerInfo's signature value, any signer algorithm, nestable, with the primary bytes preserved so it still verifies — attached as the id-countersignature unsigned attribute; `verify` returns each countersignature's verdict under `signers[i].countersignatures` and every unsigned attribute — including an RFC 3161 timestamp token, attachable via `sign`'s `unsignedAttributes` — under `signers[i].unsignedAttrs`, surfaced unauthenticated. `encrypt(content, recipients, opts)` produces an EnvelopedData, AuthEnvelopedData (AES-GCM, the authenticated default), or EncryptedData, with recipients auto-dispatched off the certificate key to key transport (RSAES-OAEP; v1.5 is never emitted), key agreement (ephemeral-static ECDH over P-256/384/521 with the X9.63 KDF, and X25519/X448 with HKDF), symmetric key wrap, password (PBKDF2 with RFC 3211 PWRI-KEK), or the post-quantum ML-KEM (and composite ML-KEM, draft-lamps-pq-composite-kem) KEMRecipientInfo (RFC 9629/9936), wrapping one fresh content key for every recipient. The content may also be an async iterable of byte chunks, streamed through the AES-GCM or AES-CBC content cipher so a large plaintext is encrypted without being buffered whole; the ciphertext is assembled before the definite-length encryptedContent is emitted, byte-for-byte the buffered form. `decrypt(input, keyMaterial, opts)` recovers the content through the matching arm and returns it with an `authenticated` flag; every secret-dependent failure collapses to one uniform `cms/decrypt-failed` verdict (Bleichenbacher, EFAIL, and password-oracle freedom), and PKCS#1 v1.5 is decrypt-only under the RFC 3218 implicit-rejection countermeasure. With `opts.stream: true` the recovered `content` is an async iterable of plaintext chunks instead of a single Buffer, for a payload too large to hold whole; the authenticated modes (AuthEnvelopedData, AuthenticatedData, AES-GCM) verify integrity before the iterable yields, so a forged message throws before any plaintext is exposed, while a CBC EnvelopedData or EncryptedData yields the plaintext as the cipher produces it. Every key-establishment secret the toolkit allocates is wiped once used, on the failing path as well as the succeeding one: the KEM shared secret and its derived key-encryption key, the raw ECDH / X25519 / X448 agreement secret, a password-derived key-encryption key, and the content-encryption key itself, cleared once the message is complete since all recipients share it. Caller-supplied key material is never written to (best-effort; NIST SP 800-227 §4.2, RFC 9629 §7). `authenticate(content, recipients, opts)` produces an `id-ct-authData` (§9): cleartext content plus an HMAC-SHA-256/384/512 MAC, authenticated but not encrypted, with the fresh MAC key wrapped for every recipient through the same RecipientInfo model. The MAC covers the authenticated attributes (content-type and message-digest) re-tagged to the EXPLICIT SET OF (§9.2), or the content octets directly; `decrypt` recovers the MAC key, recomputes the MAC and independently the message-digest (§9.3), and releases the content only after both pass, with every secret-dependent failure collapsing to the uniform `cms/decrypt-failed`. `compress(content, opts)` and `decompress(input, opts)` produce and consume a CompressedData (RFC 3274; ZLIB, version 0, id-alg-zlibCompress); decompress bounds the uncompressed output at 16 MiB and stops before it is materialized, so a decompression bomb fails closed as `cms/decompress-too-large`. Compression is a size transform with no integrity or confidentiality (RFC 8551 §2.4.5). `certsOnly(certs, opts?)` builds a certs-only certificate-management message (RFC 8551 §3.8): a degenerate SignedData with an empty signerInfos and no eContent that conveys certificates and CRLs without signing anything, `parseCertsOnly(input, opts?)` reads one back to its raw certificate and CRL DER (a CRL-only message is valid here, unlike the cert-required RFC 5272 form that `pki.est.parseCertsOnly` reads), and `isCertsOnly(input)` recognizes one structurally. Fail-closed with typed `cms/*` errors — `sign`, `verify`, `countersign`, `encrypt`, `authenticate`, `decrypt`, `compress`, `decompress`, `certsOnly`, `parseCertsOnly`, `isCertsOnly` |
-| `pki.smime` | S/MIME message assembly, verification, encryption, and compression over the CMS layer (RFC 8551). `sign(content, signers, opts)` wraps a MIME entity in either form: `multipart/signed`, where the content stays readable in any MUA and a detached CMS SignedData rides alongside as `application/pkcs7-signature` with a matching `micalg`, or `application/pkcs7-mime; smime-type=signed-data`, where the whole entity is a base64 CMS SignedData. The signed bytes are the entity's §3.1.1 canonical form with CRLF line endings, and `verify(message, opts)` unwraps both forms and recomputes over the same canonicalizer, so a transport that re-wraps line endings still verifies while a tampered part fails. `encrypt(content, recipients, opts)` envelopes a MIME entity as an opaque `application/pkcs7-mime` message and `decrypt(message, keyMaterial, opts)` opens one, as `smime-type=authEnveloped-data` (AES-GCM, confidentiality and integrity, the default) or `smime-type=enveloped-data` (AES-CBC, confidentiality only, so `decrypt` reports `authenticated: false`, the §3.3 no-integrity caveat). The `smime-type` is derived from the CMS body rather than the header, and decryption is fail-closed and oracle-free. The crypto is entirely `pki.cms.sign` / `verify` / `encrypt` / `decrypt`, so it is algorithm-agnostic: any RSA / RSASSA-PSS / ECDSA / EdDSA / ML-DSA / SLH-DSA signer and any RSA-OAEP / ECDH / X25519 / X448 / AES-KW / PBKDF2 / ML-KEM recipient carries through. As with `cms.verify`, `verify` returns the per-signer verdict plus the recovered content, and `valid` and `trusted` are separate claims: `valid` says the signature is sound under a certificate the message carried, `trusted` says every signer chained to a root named in `opts.trustAnchors`. Anchoring here is validated for email at both ends of the chain — the signer certificate must carry `emailProtection` (RFC 8551 §4.4.4) and the anchor's own trust metadata must permit that purpose, since a root can be distrusted for email while remaining a good TLS root. Override either with `requiredEku` / `checkPurpose`. `compress(content, opts)` and `decompress(message, opts)` add the opaque `application/pkcs7-mime; smime-type=compressed-data; name=smime.p7z` frame (§3.6, RFC 3274), a size transform with no integrity or confidentiality (§2.4.5), bounded against a bomb; the recovered content, which may itself be signed or enveloped, is returned for the caller to re-verify. Header protection (RFC 9788): `sign` and `encrypt` take `opts.protectHeaders`, which inlines the caller's `opts.headers` on the Cryptographic Payload root (its Content-Type gaining `hp="clear"` when signed or `hp="cipher"` when encrypted) so the CMS signature or encryption covers them, defeating a transport that rewrites or reads Subject, From, and the rest. `verify` and `decrypt` surface the authenticated inner set as `protectedHeaders` plus `headerProtection { present, mode, fromMismatch, confidential, legacy }`, so a tampered outer header cannot alter it and `fromMismatch` flags an outer From that disagrees. Encryption applies a Header Confidentiality Policy: the default `hcp_baseline` obscures the outer Subject to `[...]` and removes Comments and Keywords, so the real values live only in the ciphertext, and `decrypt` recovers them. Every emitted header routes through a fail-closed injection guard that rejects a CR, LF, or NUL value and a non-ftext name, and a malformed or contradictory `hp` wrap fails closed as `smime/bad-header-protection` rather than silently downgrading. The CMS crypto is unchanged. Inbound legacy RFC 8551 header protection is recognized opt-in: `verify` and `decrypt` with `opts.legacyHeaderProtection` detect a legacy `message/rfc822`-wrapped payload by the RFC 9788 §4.10.1 four-condition identification and surface the inner headers under `headerProtection.legacy = { headers, mode, fromMismatch, confidential }`, where `headers` is an ordered `[{ name, value }]` array retaining legally repeated fields such as `Received`. Those never appear in `protectedHeaders` and never set `present: true`. Because a legacy message is structurally indistinguishable from an ordinary forwarded `message/rfc822`, this is an explicit heuristic (§4.10.2, "no strong end-to-end guarantees"): a caller keying trust off `present` or `protectedHeaders` is never misled, and only one that explicitly reads `headerProtection.legacy.headers` and cross-checks `legacy.fromMismatch` consumes it. It is off by default, and a nested crypto layer, an inner `hp=`, a non-`message/rfc822` payload, or a duplicate Content-Type reports `legacy: null`. Bidirectionally interoperable with `openssl smime` and `openssl cms`. `buildCertsOnly(certs, opts?)` wraps a `pki.cms.certsOnly` certificate-management message in one `application/pkcs7-mime; smime-type=certs-only; name=smime.p7c` entity, read back by OpenSSL's `pkcs7 -print_certs`. Fail-closed with typed `smime/*` errors — `sign`, `verify`, `encrypt`, `decrypt`, `compress`, `decompress`, `buildCertsOnly` |
+| `pki.smime` | S/MIME message assembly, verification, encryption, and compression over the CMS layer (RFC 8551). `sign(content, signers, opts)` wraps a MIME entity in either form: `multipart/signed`, where the content stays readable in any MUA and a detached CMS SignedData rides alongside as `application/pkcs7-signature` with a matching `micalg`, or `application/pkcs7-mime; smime-type=signed-data`, where the whole entity is a base64 CMS SignedData. The signed bytes are the entity's §3.1.1 canonical form with CRLF line endings, and `verify(message, opts)` unwraps both forms and recomputes over the same canonicalizer, so a transport that re-wraps line endings still verifies while a tampered part fails. `encrypt(content, recipients, opts)` envelopes a MIME entity as an opaque `application/pkcs7-mime` message and `decrypt(message, keyMaterial, opts)` opens one, as `smime-type=authEnveloped-data` (AES-GCM, confidentiality and integrity, the default) or `smime-type=enveloped-data` (AES-CBC, confidentiality only, so `decrypt` reports `authenticated: false`, the §3.3 no-integrity caveat). The `smime-type` is derived from the CMS body rather than the header, and decryption is fail-closed and oracle-free. The crypto is entirely `pki.cms.sign` / `verify` / `encrypt` / `decrypt`, so it is algorithm-agnostic: any RSA / RSASSA-PSS / ECDSA / EdDSA / ML-DSA / SLH-DSA signer and any RSA-OAEP / ECDH / X25519 / X448 / AES-KW / PBKDF2 / ML-KEM recipient carries through. As with `cms.verify`, `verify` returns the per-signer verdict plus the recovered content, and `valid` and `trusted` are separate claims: `valid` says the signature is sound under a certificate the message carried, `trusted` says every signer chained to a root named in `opts.trustAnchors`. Anchoring here is validated for email at both ends of the chain — the signer certificate must carry `emailProtection` (RFC 8550 §4.4.4) and the anchor's own trust metadata must permit that purpose, since a root can be distrusted for email while remaining a good TLS root. `sign` refuses a signer certificate a conforming reader would reject: a `keyUsage` extension without `digitalSignature` or `nonRepudiation` (RFC 8550 §4.4.2), or an `extendedKeyUsage` extension without `emailProtection` or `anyExtendedKeyUsage` (§4.4.4); a certificate carrying neither extension signs. Override either with `requiredEku` / `checkPurpose`. `compress(content, opts)` and `decompress(message, opts)` add the opaque `application/pkcs7-mime; smime-type=compressed-data; name=smime.p7z` frame (§3.6, RFC 3274), a size transform with no integrity or confidentiality (§2.4.5), bounded against a bomb; the recovered content, which may itself be signed or enveloped, is returned for the caller to re-verify. Header protection (RFC 9788): `sign` and `encrypt` take `opts.protectHeaders`, which inlines the caller's `opts.headers` on the Cryptographic Payload root (its Content-Type gaining `hp="clear"` when signed or `hp="cipher"` when encrypted) so the CMS signature or encryption covers them, defeating a transport that rewrites or reads Subject, From, and the rest. `verify` and `decrypt` surface the authenticated inner set as `protectedHeaders` plus `headerProtection { present, mode, fromMismatch, confidential, legacy }`, so a tampered outer header cannot alter it and `fromMismatch` flags an outer From that disagrees. Encryption applies a Header Confidentiality Policy: the default `hcp_baseline` obscures the outer Subject to `[...]` and removes Comments and Keywords, so the real values live only in the ciphertext, and `decrypt` recovers them. Every emitted header routes through a fail-closed injection guard that rejects a CR, LF, or NUL value and a non-ftext name, and a malformed or contradictory `hp` wrap fails closed as `smime/bad-header-protection` rather than silently downgrading. The CMS crypto is unchanged. Inbound legacy RFC 8551 header protection is recognized opt-in: `verify` and `decrypt` with `opts.legacyHeaderProtection` detect a legacy `message/rfc822`-wrapped payload by the RFC 9788 §4.10.1 four-condition identification and surface the inner headers under `headerProtection.legacy = { headers, mode, fromMismatch, confidential }`, where `headers` is an ordered `[{ name, value }]` array retaining legally repeated fields such as `Received`. Those never appear in `protectedHeaders` and never set `present: true`. Because a legacy message is structurally indistinguishable from an ordinary forwarded `message/rfc822`, this is an explicit heuristic (§4.10.2, "no strong end-to-end guarantees"): a caller keying trust off `present` or `protectedHeaders` is never misled, and only one that explicitly reads `headerProtection.legacy.headers` and cross-checks `legacy.fromMismatch` consumes it. It is off by default, and a nested crypto layer, an inner `hp=`, a non-`message/rfc822` payload, or a duplicate Content-Type reports `legacy: null`. Bidirectionally interoperable with `openssl smime` and `openssl cms`. `buildCertsOnly(certs, opts?)` wraps a `pki.cms.certsOnly` certificate-management message in one `application/pkcs7-mime; smime-type=certs-only; name=smime.p7c` entity, read back by OpenSSL's `pkcs7 -print_certs`. Fail-closed with typed `smime/*` errors — `sign`, `verify`, `encrypt`, `decrypt`, `compress`, `decompress`, `buildCertsOnly` |
 | `pki.tsp` | Time-Stamp Protocol (RFC 3161). `sign(messageImprint, tsa, opts)` produces a TimeStampToken: a CMS SignedData over `pki.cms.sign` whose content is a `TSTInfo` carrying the timestamped message imprint, the TSA policy, a serial number, and `genTime` with optional accuracy, nonce, and ordering, plus the §2.4.2 signing-certificate attribute binding the token to the TSA certificate (SHA-2 imprints, any `pki.cms.sign` TSA key). The TSA certificate is held to §2.3 before signing (one critical extendedKeyUsage naming timeStamping alone) with the codes `verify` answers, `genTime` keeps its milliseconds as the §2.4.2 fraction of a second, and an accuracy naming no field is refused. `request` and `parseRequest` build and parse the TimeStampReq a client sends (imprint, requested policy, nonce, certReq); `response` and `parseResponse` handle the TimeStampResp a TSA returns, either a granted status wrapping a token or a rejection with PKIStatus and failure info, with the §2.4.2 status-to-token coupling enforced in both directions. `verify(token, data, opts)` verifies a token fail-closed: the CMS signature over the exact signed bytes, the message imprint recomputed from the data, the TSTInfo content type, the ESSCertID(V2) binding to the TSA certificate, the §2.3 critical timeStamping-only extendedKeyUsage, the request nonce when used, and, with a trust anchor supplied, full certification-path validation of the TSA certificate at the token's `genTime` — judged under the `timeStamping` purpose, so an anchor's own per-purpose trust metadata reaches the decision rather than sitting inert. It returns `{ valid, trusted, genTime, serialNumber, tstInfo, ... }`, where `trusted` is the separate claim that the authority chained to an anchor you named: without one there is nothing to chain to and it is `false`, which is the distinction a timestamp re-read years later turns on — `sign`, `request`, `parseRequest`, `response`, `parseResponse`, `verify` |
 | `pki.ocsp` | Online Certificate Status Protocol (RFC 6960), both the responder and relying-party surface. `buildRequest(query, opts)` builds an OCSPRequest for one or more `{ cert, issuer }` pairs, with the CertID hashed under SHA-1 by default per the RFC 5019 lightweight profile or under SHA-2, plus an optional RFC 9654 nonce (32 to 128 octets, the requester floor that section sets) and an optional requestor signature, under which the signer certificate's subject is the requestorName unless one is stated (RFC 6960 §4.1.2). `sign(responseData, responder, opts)` produces a signed BasicOCSPResponse over the exact `ResponseData` DER, from the issuing CA directly or a delegated responder, under any `pki.cms.sign` key including the post-quantum ML-DSA and SLH-DSA sets, with `good`, `revoked` (reason and time), or `unknown` per-certificate status, and per-response `singleExtensions` naming the §4.4.4 archive cutoff and the §4.4.2 CRL reference as fields, each read back by name by the parser. The signer refuses what its own lint would grade an error: a pre-encoded singleExtension that RFC 6960 places in requests or in responseExtensions, a CRL entry extension carried at the wrong criticality, and CRL references or entry extensions on a non-issued response, which itself places the §4.4.8 extended revoked definition in responseExtensions without being asked. `buildErrorResponse(status)` produces the unsigned §2.3 error (`tryLater`, `unauthorized`, and the rest). `verify(response, opts)` verifies a response fail-closed against the same hardened gates `pki.path.ocspChecker` runs: the CertID binding, responder authorization (the issuing CA, or a CA-issued delegate bearing id-kp-OCSPSigning and id-pkix-ocsp-nocheck and passing the full out-of-path certificate gates), the signature over `tbsResponseDataBytes`, currency against `thisUpdate` and `nextUpdate`, and the request-nonce echo. It returns `{ status: "good" / "revoked" / "unknown", ... }` and never silently accepts. `verifyRequest(request, opts)` is the responder-side inverse of `buildRequest`: it verifies a client's signed request (RFC 6960 §4.1.1) under the requestor certificate the request carries, trying each embedded certificate since the field is unordered, and reports `signed`, `signatureValid`, every certificate whose key verified the signature and whose subject is the `requestorName` the request states (`signerCerts`, so a key carried under an expired certificate beside its renewal is not hidden behind ordering, while a same-key certificate under another name is not the requestor) with the first one's decoded subject, the full embedded certificate bag (`certs`, including intermediates for path building), and the request's CertIDs; the name check is reported as `requestorNamed` (RFC 6960 §4.1.2) and `valid` requires it, a request no verifying certificate names falls back to listing the verifying ones with `valid: false`, and an unsigned request is reported with `signed: false` rather than refused. Transport-free — `buildRequest`, `sign`, `buildErrorResponse`, `verify`, `verifyRequest` |
 | `pki.ct` | Certificate Transparency (RFC 6962). `parseSctList` decodes the `SignedCertificateTimestampList` a certificate or OCSP response carries, a TLS-presentation-language payload inside the §3.3 double DER wrap, into per-SCT log id, exact `timestamp` (BigInt), named signature algorithm, and raw signature. `reconstructSignedData` rebuilds the exact `digitally-signed` preimage, and `verifySct` verifies an SCT signature against a log's public key, routing an ECDSA signature through the strict DER-conformance gate and verifying through the crypto engine, resolving true or false and throwing a typed error on a structural fault. On the producing side, `encodeSctList` builds the extension value byte for byte as the exact inverse of `parseSctList`, and `signSct` performs a log's signing step. For trust, `parseLogList` ingests the CT log-list JSON into constraint-carrying trusted logs, recomputing each log's id as SHA-256 of its key and refusing a disagreeing id (a swapped key, §3.2) and decoding the state and temporal-interval constraints; `verifySctWithLogList` resolves the log key from an SCT's log id, enforces the state (usable, qualified, and readonly trusted; retired only before retirement; pending and rejected refused) and the temporal-interval window, then delegates the signature check to `verifySct`. `verifyLogListSignature(json, signature, publicKey)` verifies the detached `log_list.sig` over the raw log-list bytes against a caller-pinned signer key (RSASSA-PKCS1-v1.5/SHA-256 and an EC P-256 arm, with forgeable-key defenses failing closed), cross-checked against `openssl dgst`. `fetchLogList(opts)` turns that chain into a live client: it GETs the `log_list.json` and its detached `log_list.sig` over `pki.transport`, verifies the detached signature over the raw fetched bytes against a caller-pinned distributor key before parsing, so an unverified document is never parsed, read, cached, or surfaced, then ingests the same bytes through `parseLogList` and returns the trusted-log set plus the surfaced `version` and `timestamp`. Above the per-SCT layer, `verifySctList` renders a certificate-level verdict over every SCT a certificate carries (§3.3), reporting how many distinct trusted logs verified an SCT (so a duplicated SCT cannot inflate the count) and from how many distinct trusted operators against a caller's CT policy (`minScts` and `minOperators`, both defaulting to the RFC floor of one), where a policy shortfall is a verdict and a per-SCT failure is a recorded row rather than a thrown call; `x509CertEntry` reconstructs the precertificate log entry from a final certificate by removing the SCT-list extension from its TBSCertificate as byte surgery, so its embedded SCTs verify end to end (§3.2). The toolkit bakes in no vendor URL or key, TLS trust is explicit with `rejectUnauthorized` always on, each response is size-capped before the trust chain, and the transport is injectable so the whole path is testable offline — `parseSctList`, `reconstructSignedData`, `verifySct`, `encodeSctList`, `signSct`, `parseLogList`, `verifySctWithLogList`, `verifySctList`, `x509CertEntry`, `verifyLogListSignature`, `fetchLogList` |

package/lib/cmp-build.js

@@ -163,6 +163,34 @@ function _encodeGeneralInfo(itavs, code, what) {
 
 function _algIdNoParams(name) { return b.sequence([b.oid(O(name))]); }
 
+/** @internal The header as this verb read it, with the transaction fields a receiver requires filled
+ * when the caller omitted them. RFC 9483 sec. 3.5 has a receiver refuse a PKIMessage without a
+ * transactionID or with a senderNonce under 128 bits, and RFC 9810 sec. 5.1.1 recommends 128 random
+ * bits for each, so a message built without them carries fresh 16-byte values rather than being sent
+ * to be refused; a senderNonce the caller states under 128 bits is refused here for the same reason. A
+ * recipNonce is never filled, since it echoes the other side's value or is absent. The header's known
+ * fields are read once into a record, so the protection (a KEM MAC binds to the transactionID) and
+ * the encoding see one value. */
+function _headerWithTransactionFields(headerSpec) {
+  if (!headerSpec || typeof headerSpec !== "object" || _isBuffer(headerSpec)) throw _err("cmp/bad-input", "message.header must be an object");
+  guard.identifier.assertKnownKeys(headerSpec, KNOWN_HEADER_KEYS, _err, "cmp/bad-input", "unknown header field ");
+  var header = guard.identifier.snapshotOptions(headerSpec, KNOWN_HEADER_KEYS);
+  if (header.transactionID == null) header.transactionID = _freshTransactionField();
+  if (header.senderNonce == null) header.senderNonce = _freshTransactionField();
+  else if (_b.reqDer(header.senderNonce, "header.senderNonce").length < TRANSACTION_FIELD_BYTES) {
+    throw _err("cmp/bad-input", "header.senderNonce must carry at least 128 bits, since a receiver refuses a shorter one (RFC 9483 sec. 3.5)");
+  }
+  return header;
+}
+
+var TRANSACTION_FIELD_BYTES = 16;
+
+/** @internal 128 fresh random bits, the width RFC 9810 sec. 5.1.1 recommends for a transactionID and
+ * a senderNonce, drawn the way pki.cmp.session draws its nonces. */
+function _freshTransactionField() {
+  return intrinsic.bufferFrom(webcrypto.webcrypto.getRandomValues(new intrinsic.Uint8Array(TRANSACTION_FIELD_BYTES)));
+}
+
 function _encodeHeader(headerSpec, protectionAlgDer, pvno) {
   if (!headerSpec || typeof headerSpec !== "object" || Buffer.isBuffer(headerSpec)) throw _err("cmp/bad-input", "message.header must be an object");
   guard.identifier.assertKnownKeys(headerSpec, KNOWN_HEADER_KEYS, _err, "cmp/bad-input", "unknown header field ");
@@ -811,6 +839,7 @@ async function _build(message, opts) {
     });
   if (message.header == null) throw _err("cmp/bad-input", "message.header is required");
   if (message.body == null) throw _err("cmp/bad-input", "message.body is required");
+  message = { header: _headerWithTransactionFields(message.header), body: message.body };
 
   var prot = _resolveProtection(opts, message);
   var senderKey = opts.key;
@@ -864,7 +893,10 @@ function _collectExtraCerts(opts, protCertDer) {
  *
  * Build an RFC 9810 CMP `PKIMessage`, the producing-side inverse of `pki.schema.cmp.parse`. `message` is
  * `{ header, body }`: `header` carries the `sender` / `recipient` GeneralNames plus optional transaction
- * metadata (`transactionID`, `senderNonce`, `messageTime`, `freeText`, `generalInfo`, ...); `body` is a
+ * metadata (`transactionID`, `senderNonce`, `messageTime`, `freeText`, `generalInfo`, ...). A `transactionID`
+ * or `senderNonce` the caller omits is filled with 16 fresh random bytes, the width RFC 9810 sec. 5.1.1
+ * recommends and RFC 9483 sec. 3.5 has a receiver require, so every built message is receivable; a
+ * `senderNonce` given under 128 bits is refused (`cmp/bad-input`), and a `recipNonce` is never filled. `body` is a
  * single-key object naming the arm. Request-side: `{ ir }` / `{ cr }` / `{ kur }` / `{ krr }` (key recovery,
  * RFC 9810 sec. 5.3.7) / `{ ccr }` (cross-certification, RFC 9810 sec. 5.3.11: the requesting CA keeps its
  * private key, so a ccr carrying the private-key-transport encryptedKey proof-of-possession is refused; a

package/lib/scep.js

@@ -87,6 +87,7 @@ function _nonce(v, label) {
 function _transactionId(v) {
   if (typeof v !== "string" || v.length === 0) throw _err("scep/bad-input", "transactionId must be a non-empty string (RFC 8894 sec. 3.2.1.1)");
   if (v.length > C.LIMITS.SCEP_TRANSACTION_ID_MAX) throw _err("scep/bad-input", "transactionId exceeds the " + C.LIMITS.SCEP_TRANSACTION_ID_MAX + "-character cap");
+  if (!asn1.isPrintableString(v)) throw _err("scep/bad-input", "transactionId is a PrintableString (RFC 8894 sec. 3.2.1.1): letters, digits, space and ' ( ) + , - . / : = ? only");
   return v;
 }
 

package/lib/smime.js

@@ -41,7 +41,9 @@ var schemaX509 = require("./schema-x509.js");
 var pkix = require("./schema-pkix.js");
 var oid = require("./oid.js");
 var guard = require("./guard-all.js");
+var pkiBuild = require("./pki-build.js");
 var C = require("./constants.js");
+var nodeUtil = require("util");
 var nodeCrypto = require("crypto");
 
 var SmimeError = frameworkError.SmimeError;
@@ -322,9 +324,130 @@ function _legacyHpSurface(canon, outerEnt, mode, enabled) {
 var SAN_OID = oid.byName("subjectAltName");
 var SMTP_UTF8_MAILBOX = oid.byName("smtpUtf8Mailbox");
 var EMAIL_ADDRESS_ATTR = oid.byName("emailAddress");
+var EMAIL_PROTECTION_OID = oid.byName("emailProtection");
+var ANY_EKU_OID = oid.byName("anyExtendedKeyUsage");
+var DESCRIPTOR_MAX_PROTOTYPES = 32;
+var DESCRIPTOR_MAX_FIELDS = 64;
 var _extNs = pkix.makeNS("smime", SmimeError, oid);
 var _extDecoders = pkix.certExtensionDecoders(_extNs);
 var _extCtx = Object.assign(Object.create(null), { E: function (c, m, cause) { return new SmimeError(c, m, cause); }, oid: oid });
+
+/** @internal A signer certificate fit to sign mail. RFC 8550 sec. 4.4.2: a receiving agent "MUST
+ * NOT accept the signature of a message if it was verified using a certificate that contains a key
+ * usage extension without at least one of the digitalSignature or nonRepudiation bits set", and
+ * sec. 4.4.4: if the extended key usage extension is present, a receiving agent "MUST check that it
+ * contains either the id-kp-emailProtection OID or the anyExtendedKeyUsage OID". A message signed
+ * under such a certificate is refused by every conforming reader, so it is not produced. An absent
+ * extension permits signing: sec. 4.4.2 has a reader presume both bits, and sec. 4.4.4 lets a
+ * certificate with no extended key usage sign. */
+function _assertSignerFitForMail(certDer, position) {
+  var parsed;
+  try { parsed = schemaX509.parse(certDer); }
+  catch (e) { throw _err("smime/bad-input", "signer " + position + "'s certificate is not a well-formed X.509 certificate", e); }
+  var label = "signer " + position + "'s certificate";
+  var ku = pkix.keyUsageOf(_extNs, parsed, _err, "smime/bad-signer-certificate", label);
+  if (ku !== null && !(ku.digitalSignature === true || ku.nonRepudiation === true)) {
+    throw _err("smime/bad-signer-certificate", label + " carries a keyUsage extension with neither digitalSignature nor nonRepudiation, and a receiving agent must not accept a signature under it (RFC 8550 sec. 4.4.2)");
+  }
+  var purposes = pkix.extKeyUsageOf(_extNs, parsed, _err, "smime/bad-signer-certificate", label);
+  if (purposes !== null && !guard.list.contains(purposes, EMAIL_PROTECTION_OID) && !guard.list.contains(purposes, ANY_EKU_OID)) {
+    throw _err("smime/bad-signer-certificate", label + " carries an extendedKeyUsage extension with neither emailProtection nor anyExtendedKeyUsage, and a receiving agent must check for one of them (RFC 8550 sec. 4.4.4)");
+  }
+}
+
+/** @internal The signer descriptors as this verb read them, held to the rule above before anything
+ * is signed, and handed on to pki.cms.sign as the SAME values: every field a descriptor carries, own
+ * or inherited, is read once with the descriptor as its receiver into a record, and the certificate
+ * is the DER it coerced to, so a `cert` accessor cannot answer one certificate to this check and
+ * another to the signing beneath, and an accessor over private state answers to the object it was
+ * defined for. A single descriptor is the list of one pki.cms.sign accepts. Anything that is not a
+ * descriptor travels as given, for pki.cms.sign to refuse in its own words. */
+function _snapshotSignersFitForMail(signers) {
+  /** @internal A proxy, as the list or as a descriptor, is refused before anything trusts what its
+   * traps answer, as the toolkit's guarded snapshots refuse one; nothing is read through it. A
+   * sparse list is refused at its first missing slot, as pki.cms.sign refuses it, before any slot
+   * is visited; a list whose own faults surface is this verb's error too. */
+  if (nodeUtil.types.isProxy(signers)) throw _err("smime/bad-input", "the signer list must not be a proxy");
+  var list;
+  try { list = Array.isArray(signers) ? pkiBuild.reqDenseArray(signers, "the signer list", _err, "smime/bad-input") : [signers]; }
+  catch (e) {
+    if (e instanceof SmimeError) throw e;
+    throw _err("smime/bad-input", "the signer list could not be read", e);
+  }
+  var out = [];
+  for (var i = 0; i < list.length; i++) {
+    var s = list[i];
+    /** @internal An object or a function is a descriptor pki.cms.sign reads. An absent one travels
+     * as given for pki.cms.sign to refuse in its own words; a primitive is refused here, since the
+     * only fields it could answer with are ones a built-in prototype was made to carry. */
+    if (s === null || s === undefined) { guard.list.append(out, s); continue; }
+    if (typeof s !== "object" && typeof s !== "function") throw _err("smime/bad-input", "signer " + (i + 1) + " is not a signer descriptor (an object carrying cert and key)");
+    if (nodeUtil.types.isProxy(s)) throw _err("smime/bad-input", "signer " + (i + 1) + " must not be a proxy");
+    var copy = _readDescriptor(s, i + 1);
+    /** @internal The one read of `cert`, whatever it answered: an absent certificate stays absent,
+     * so an accessor cannot answer nothing here and a certificate to the signing beneath. A present
+     * one is an owned copy of the bytes, not a view, since a later descriptor's accessor runs after
+     * this check and could rewrite a buffer the caller still holds. */
+    if (copy.cert != null) {
+      /** @internal A certificate that cannot be read, in either encoding, is this verb's bad
+       * input, never the PEM codec's own code. */
+      try { copy.cert = guard.bytes.snapshot(pkix.coerceToDer(copy.cert, { pemLabel: "CERTIFICATE", PemError: SmimeError, ErrorClass: SmimeError, prefix: "smime" }), SmimeError, "smime/bad-input", "signer " + (i + 1) + "'s certificate"); }
+      catch (e) { throw _err("smime/bad-input", "signer " + (i + 1) + "'s certificate could not be read as DER or PEM", e); }
+      _assertSignerFitForMail(copy.cert, i + 1);
+    }
+    guard.list.append(out, copy);
+  }
+  return out;
+}
+
+/** @internal Whether a prototype-level property is a method: a data property holding a function. */
+function _isMethod(proto, name) {
+  var d = Object.getOwnPropertyDescriptor(proto, name);
+  return !!d && !d.get && !d.set && typeof d.value === "function";
+}
+
+/** @internal Every named field of a descriptor, own or inherited up to the built-in roots (the
+ * object and function prototypes carry no descriptor field, and the function one carries accessors
+ * that throw on being read), read once with the descriptor as receiver into a record with no
+ * prototype. An accessor that throws is a caller fault reported in this verb's class. */
+function _readDescriptor(s, position) {
+  var copy = Object.create(null), seen = Object.create(null), fields = 0;
+  try {
+    /** @internal The descriptor's own level carries every key, Symbol-keyed and `constructor`
+     * included, as the caller set them; a prototype level's `constructor` is the class, not a
+     * field. A descriptor carries a handful of fields, so one answering more than the cap is
+     * refused before they are read. */
+    var symbols = Object.getOwnPropertySymbols(s);
+    for (var y = 0; y < symbols.length; y++) {
+      if (++fields > DESCRIPTOR_MAX_FIELDS) throw _err("smime/bad-input", "signer " + position + " carries more than " + DESCRIPTOR_MAX_FIELDS + " fields");
+      copy[symbols[y]] = s[symbols[y]];
+    }
+    /** @internal The walk is bounded: a proxy may answer itself, or another visited object, as its
+     * prototype, and a chain has a depth no descriptor reaches. A prototype level's methods are
+     * the class's, not signer fields: neither copied nor counted. */
+    var visited = [], depth = 0;
+    for (var proto = s; proto !== null && proto !== Object.prototype && proto !== Function.prototype; proto = Object.getPrototypeOf(proto)) {
+      if (visited.indexOf(proto) !== -1 || ++depth > DESCRIPTOR_MAX_PROTOTYPES) {
+        throw _err("smime/bad-input", "signer " + position + "'s prototype chain is cyclic or deeper than " + DESCRIPTOR_MAX_PROTOTYPES);
+      }
+      if (nodeUtil.types.isProxy(proto)) throw _err("smime/bad-input", "signer " + position + " must not inherit from a proxy");
+      guard.list.append(visited, proto);
+      var names = Object.getOwnPropertyNames(proto);
+      for (var n = 0; n < names.length; n++) {
+        var name = names[n];
+        if ((name === "constructor" && proto !== s) || seen[name] === 1) continue;
+        if (proto !== s && _isMethod(proto, name)) continue;
+        seen[name] = 1;
+        if (++fields > DESCRIPTOR_MAX_FIELDS) throw _err("smime/bad-input", "signer " + position + " carries more than " + DESCRIPTOR_MAX_FIELDS + " fields");
+        copy[name] = s[name];
+      }
+    }
+  } catch (e) {
+    if (e instanceof SmimeError) throw e;
+    throw _err("smime/bad-input", "signer " + position + " could not be read as a signer descriptor", e);
+  }
+  return copy;
+}
 function _signerEmails(certDer) {
   var out = { addresses: [], unreadable: 0 };
   var parsed = null;
@@ -473,7 +596,14 @@ function _base64Body(der) {
  * Assemble a signed S/MIME message (RFC 8551). `content` is the payload: a raw body wrapped as a
  * `text/plain` entity by default, or the caller's own complete MIME entity when `opts.entity` is set;
  * `signers` is the `pki.cms.sign` signer array (any RSA / RSASSA-PSS / ECDSA / EdDSA / ML-DSA / SLH-DSA
- * signer: the S/MIME layer is algorithm-agnostic). Two forms via `opts.form`:
+ * signer: the S/MIME layer is algorithm-agnostic). Each signer's certificate must be one a conforming
+ * receiving agent accepts a mail signature under: a `keyUsage` extension it carries must assert
+ * `digitalSignature` or `nonRepudiation` (RFC 8550 sec. 4.4.2) and an `extendedKeyUsage` extension it
+ * carries must include `emailProtection` or `anyExtendedKeyUsage` (sec. 4.4.4); a certificate with neither
+ * extension signs, and one failing either rule is refused with `smime/bad-signer-certificate`. The rule is
+ * about the certificate the message carries: a key-only signer (`{ key, spki, keyIdentifier }`, the form
+ * RFC 8550 sec. 3 permits where correspondents hold each other's certificates by other means) carries none,
+ * and the reader holds the certificate it supplies to the same rule. Two forms via `opts.form`:
  *   - `"multipart"` (default, clear-signed): a `multipart/signed` message carrying the canonical entity
  *     verbatim in the first part and a DETACHED CMS SignedData (`application/pkcs7-signature`) over its
  *     canonical form in the second, with `protocol="application/pkcs7-signature"` + a matching `micalg`.
@@ -505,6 +635,7 @@ function _base64Body(der) {
 async function sign(content, signers, opts) {
   opts = opts || {};
   opts = _knownOpts(opts, SIGN_OPTS, "sign");
+  signers = _snapshotSignersFitForMail(signers);
   var hp = opts.protectHeaders === true;
   var hpList = hp ? _hpHeaderList(opts.headers) : null;
   var outerList = hp ? _outerHeaderList(hpList, "clear", opts.hcp) : null;
@@ -553,7 +684,7 @@ function _capped(msg) {
  * certificates, so `valid` says the signature is sound under one of them and nothing about who signed.
  * Name the roots you accept in `opts.trustAnchors` and `trusted` says every signer chained to one,
  * validated for EMAIL, at both ends of the chain. The signer certificate must carry the
- * `emailProtection` key purpose (RFC 8551 sec. 4.4.4), because a certificate restricted to `serverAuth`
+ * `emailProtection` key purpose (RFC 8550 sec. 4.4.4), because a certificate restricted to `serverAuth`
  * chains to its root perfectly well and is still the wrong key to have signed a message; and the anchor's
  * own trust metadata must permit that purpose, because a root distributed with NSS trust bits can be
  * marked untrusted for email while remaining a good TLS root. Override either with `opts.requiredEku`

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@blamejs/pki",
-  "version": "0.7.41",
+  "version": "0.7.43",
   "description": "Pure-JavaScript PKI toolkit that owns its stack — X.509, ASN.1/DER, CMS, PQC-first.",
   "license": "Apache-2.0",
   "author": "blamejs contributors",

package/sbom.cdx.json

@@ -2,10 +2,10 @@
   "$schema": "http://cyclonedx.org/schema/bom-1.5.schema.json",
   "bomFormat": "CycloneDX",
   "specVersion": "1.5",
-  "serialNumber": "urn:uuid:2f774cf6-ab61-4b1c-8dab-ee0085cfb2a5",
+  "serialNumber": "urn:uuid:49d1f6f5-4015-4d2e-8a08-b951828f36aa",
   "version": 1,
   "metadata": {
-    "timestamp": "2026-09-12T20:24:38.981Z",
+    "timestamp": "2026-09-12T23:16:35.964Z",
     "lifecycles": [
       {
         "phase": "build"
@@ -19,14 +19,14 @@
       }
     ],
     "component": {
-      "bom-ref": "@blamejs/pki@0.7.41",
+      "bom-ref": "@blamejs/pki@0.7.43",
       "type": "application",
       "name": "pki",
-      "version": "0.7.41",
+      "version": "0.7.43",
       "scope": "required",
       "author": "blamejs contributors",
       "description": "Pure-JavaScript PKI toolkit that owns its stack — X.509, ASN.1/DER, CMS, PQC-first.",
-      "purl": "pkg:npm/%40blamejs/pki@0.7.41",
+      "purl": "pkg:npm/%40blamejs/pki@0.7.43",
       "properties": [],
       "externalReferences": [
         {
@@ -54,7 +54,7 @@
   "components": [],
   "dependencies": [
     {
-      "ref": "@blamejs/pki@0.7.41",
+      "ref": "@blamejs/pki@0.7.43",
       "dependsOn": []
     }
   ]