@bentley/profiles-schema 1.0.3-dev.3 → 1.0.3

package/LICENSE.md

@@ -1,6 +1,6 @@
 # MIT License
 
-Copyright © 2017-2025 Bentley Systems, Incorporated. All rights reserved.
+Copyright © 2017-2026 Bentley Systems, Incorporated. All rights reserved.
 
 Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
 

package/Profiles.ecschema.json

@@ -1 +1 @@
-{"$schema":"https://dev.bentley.com/json_schemas/ec/32/ecschema","name":"Profiles","version":"01.00.03","alias":"prf","label":"Profiles","description":"EC Schema for Profiles","references":[{"name":"CoreCustomAttributes","version":"01.00.05"},{"name":"BisCustomAttributes","version":"01.00.00"},{"name":"BisCore","version":"01.00.26"},{"name":"AecUnits","version":"01.00.04"}],"customAttributes":[{"className":"CoreCustomAttributes.ProductionStatus","SupportedUse":"NotForProduction"},{"className":"BisCustomAttributes.SchemaLayerInfo","Value":"Common"}],"items":{"ProfileProperties":{"schemaItemType":"PropertyCategory","label":"Profile Properties","description":"Properties of a Structural Profile.","priority":1},"CardinalPoint":{"schemaItemType":"StructClass","label":"Cardinal Point","description":"2D location on the profile used to place and offset profiles when extruding them on curve members.","properties":[{"name":"Name","type":"PrimitiveProperty","description":"Name of the cardinal point, used to reference and distinguish cardinal points. Unique in the scope of a profile.","category":"Profiles.ProfileProperties","typeName":"string"},{"name":"Location","type":"PrimitiveProperty","description":"2D offset from the start of profiles coordinate system (0, 0) defining the location for the cardinal point.","category":"Profiles.ProfileProperties","typeName":"point2d"}]},"Profile":{"schemaItemType":"EntityClass","description":"A resource defining one or more 2D areas that may have voids.","modifier":"Abstract","baseClass":"BisCore.DefinitionElement","properties":[{"name":"Name","type":"PrimitiveProperty","description":"Name of the profile. This property is also used as designation when referencing a profile from standard catalog.","category":"Profiles.ProfileProperties","typeName":"string"},{"name":"Shape","type":"PrimitiveProperty","description":"2D geometry of the profile.","category":"Profiles.ProfileProperties","typeName":"Bentley.Geometry.Common.IGeometry"},{"name":"CardinalPoints","type":"StructArrayProperty","description":"Array of published and custom (user defined) cardinal points of the profile.","label":"Cardinal Points","typeName":"Profiles.CardinalPoint","minOccurs":0,"maxOccurs":2147483647}]},"StandardsOrganization":{"schemaItemType":"EntityClass","label":"Standards Organization","description":"Defines rules for Standard Profiles.","modifier":"Sealed","baseClass":"BisCore.DefinitionContainer"},"Manufacturer":{"schemaItemType":"EntityClass","label":"Manufacturer","description":"Produces structural members defined by Standard Profiles.","modifier":"Sealed","baseClass":"BisCore.DefinitionContainer"},"Revision":{"schemaItemType":"EntityClass","label":"Revision","description":"Revision for a set of Profiles produced by a specific Manufacturer.","modifier":"Sealed","baseClass":"BisCore.DefinitionContainer"},"SinglePerimeterProfile":{"schemaItemType":"EntityClass","label":"Single Perimeter Profile","description":"A Profile with a single outer perimeter.","modifier":"Abstract","baseClass":"Profiles.Profile","mixins":["BisCore.IParentElement"]},"ParametricProfile":{"schemaItemType":"EntityClass","label":"Parametric Profile","description":"A SinglePerimeterProfile that is guaranteed to have the center of the bounding box at (0, 0).","modifier":"Abstract","baseClass":"Profiles.SinglePerimeterProfile"},"CShapeProfile":{"schemaItemType":"EntityClass","label":"C-Shape Profile","description":"A C shaped Profile similar to rolled steel C-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the flange, defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the web, defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Constant wall thickness of flanges.","label":"Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the web.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of the lower edges of the top flange and the upper edges of the bottom flange. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower face of the top flange and of the upper face of the bottom flange. Non-zero in case of tapered flanges, 0 in case of parallel flanges, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}],"mixins":["BisCore.IParentElement"]},"IShapeProfile":{"schemaItemType":"EntityClass","label":"I-Shape Profile","description":"An I shaped Profile similar to rolled steel I-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the width (flange length), defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Flange thickness of the I-shape. Both, the upper and the lower flanges have the same thickness and they are centred on the y-axis of the position coordinate system.","label":"Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Web thickness of the I-shape. The web is centred on the x-axis and the y-axis of the position coordinate system.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of the lower edges of the top flange and the upper edges of the bottom flange. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower faces of the top flange and of the upper faces of the bottom flange. Non-zero in case of tapered flanges, 0 in case of parallel flanges, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}]},"AsymmetricIShapeProfile":{"schemaItemType":"EntityClass","description":"An asymmetric (about x-axis) I shaped Profile similar to rolled steel I-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"TopFlangeWidth","type":"PrimitiveProperty","description":"Extent of the top flange, defined parallel to the x axis of the position coordinate system.","label":"Top Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeWidth","type":"PrimitiveProperty","description":"Extent of the bottom flange, defined parallel to the x axis of the position coordinate system.","label":"Bottom Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlangeThickness","type":"PrimitiveProperty","description":"Flange thickness of the top flange.","label":"Top Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeThickness","type":"PrimitiveProperty","description":"Flange thickness of the bottom flange.","label":"Bottom Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Web thickness of the I-shape. The web is centred on the x-axis and the y-axis of the position coordinate system.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlangeFilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the top flange. 0 if sharp-edged, default 0 if not specified.","label":"Top Flange Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of the lower edges of the top flange. 0 if sharp-edged, default 0 if not specified.","label":"Top Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower faces of the top flange. Non-zero in case of of tapered top flange, 0 in case of parallel top flange, default 0 if not specified.","label":"Top Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"BottomFlangeFilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the bottom flange. 0 if sharp-edged, default 0 if not specified.","label":"Bottom Flange Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of the upper edges of the bottom flange. 0 if sharp-edged, default 0 if not specified.","label":"Bottom Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeSlope","type":"PrimitiveProperty","description":"Slope of the upper faces of the bottom flange. Non-zero in case of of tapered bottom flange, 0 in case of parallel bottom flange, default 0 if not specified.","label":"Bottom Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}]},"TShapeProfile":{"schemaItemType":"EntityClass","label":"T-Shape Profile","description":"A T-shaped Profile similar to rolled steel T-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the width (top flange), defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the flange.","label":"Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the web.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower face of the flange. Non-zero in case of tapered flange, 0 in case of non-tapered flange, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"WebEdgeRadius","type":"PrimitiveProperty","description":"Radius of web edges. 0 if sharp-edged, default 0 if not specified.","label":"Web Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebSlope","type":"PrimitiveProperty","description":"Slope of the web. Non-zero in case of tapered web, 0 in case of non-tapered web, default 0 if not specified.","label":"Web Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}]},"LShapeProfile":{"schemaItemType":"EntityClass","label":"L-Shape Profile","description":"An L-shaped Profile (also referred as Angle) similar to rolled steel L-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Horizontal leg length, defined parallel to the x axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Vertical leg length, defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Thickness","type":"PrimitiveProperty","description":"Constant wall thickness of profile.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Fillet radius between legs. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"EdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"LegSlope","type":"PrimitiveProperty","description":"Slope of the inner faces of the legs. Non-zero in case of tapered legs, 0 in case of perpendicular legs, default 0 if not specified.","label":"Leg Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}],"mixins":["BisCore.IParentElement"]},"TTShapeProfile":{"schemaItemType":"EntityClass","label":"TT-Shape Profile","description":"A TT-shaped Profile similar to double-tee concrete shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the width (top flange), defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the flange.","label":"Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the web.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebSpacing","type":"PrimitiveProperty","description":"Spacing between the two webs.","label":"Web Spacing","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower face of the flange. Non-zero in case of tapered flange, 0 in case of non-tapered flange, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"WebEdgeRadius","type":"PrimitiveProperty","description":"Radius of web edges. 0 if sharp-edged, default 0 if not specified.","label":"Web Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebSlope","type":"PrimitiveProperty","description":"Slope of the web. Non-zero in case of tapered web, 0 in case of non-tapered web, default 0 if not specified.","label":"Web Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}]},"SchifflerizedLShapeProfile":{"schemaItemType":"EntityClass","label":"Schifflerized L-Shape Profile","description":"An L-shaped Profile (also referred as Angle) with legs bent at 15 degree angle, making the angle between the legs equal to 60 degrees.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"LegLength","type":"PrimitiveProperty","description":"Leg length. Both vertical and horizontal legs are defined with equal length.","label":"Leg Length","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Thickness","type":"PrimitiveProperty","description":"Constant wall thickness of profile.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"LegBendOffset","type":"PrimitiveProperty","description":"Offset defining where legs are bent. Offset is measured from start of the angle (leg joint) to the outer bending point of the leg. LegBendOffset default value is equal to Thickness plus required offset from the leg joint.","label":"Leg Bend Offset","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Fillet radius between legs. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"EdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"ZShapeProfile":{"schemaItemType":"EntityClass","label":"Z-Shape Profile","description":"A Z-shaped Profile similar to rolled steel Z-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of single flange, defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Constant wall thickness of flanges.","label":"FlangeThickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the web.","label":"WebThickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flanges. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower face of the top flange and of the upper face of the bottom flange. Non-zero in case of tapered flanges, 0 in case of parallel flanges, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}]},"DerivedProfile":{"schemaItemType":"EntityClass","label":"Derived Profile","description":"This class represents a SinglePerimeterProfile that has been converted into a different shape via a matrix transform. Usage outside of IFC compatibility is not recommended","modifier":"Sealed","baseClass":"Profiles.SinglePerimeterProfile","properties":[{"name":"Offset","type":"PrimitiveProperty","description":"2D vector specifying how the profiles geometry will be offset from it's original coordinates.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"point2d"},{"name":"Scale","type":"PrimitiveProperty","description":"A non-uniform scale factor.","category":"Profiles.ProfileProperties","typeName":"point2d"},{"name":"Rotation","type":"PrimitiveProperty","description":"Angle by which the profiles geometry will be rotated.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"MirrorAboutYAxis","type":"PrimitiveProperty","description":"Flag indicating whether the profiles geometry should be mirrored around the Y axis.","label":"Mirror About Y-Axis","category":"Profiles.ProfileProperties","typeName":"boolean"}]},"SinglePerimeterProfileOwnsDerivedProfile":{"schemaItemType":"RelationshipClass","modifier":"Sealed","baseClass":"BisCore.ElementOwnsChildElements","strength":"Embedding","strengthDirection":"Forward","source":{"multiplicity":"(1..1)","roleLabel":"owns","polymorphic":true,"constraintClasses":["Profiles.SinglePerimeterProfile"]},"target":{"multiplicity":"(0..*)","roleLabel":"is owned by","polymorphic":false,"constraintClasses":["Profiles.DerivedProfile"]}},"ICenterlineProfile":{"schemaItemType":"Mixin","label":"Centerline Profile","properties":[{"name":"Centerline","type":"PrimitiveProperty","description":"Non self intersecting centerline defining the geometry of the Profile.","category":"Profiles.ProfileProperties","typeName":"Bentley.Geometry.Common.IGeometry"},{"name":"WallThickness","type":"PrimitiveProperty","description":"Constant thickness that is applied evenly along the Centerline.","label":"Wall Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"appliesTo":"Profiles.Profile"},"CenterlineCShapeProfile":{"schemaItemType":"EntityClass","label":"Centerline C-Shape Profile","description":"A C shaped Profile with rounded corners, similar to cold-formed steel C-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the flange, defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the web, defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Girth","type":"PrimitiveProperty","description":"Length of lips. 0 if profile doesn't have lips, default 0 if not specified.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"CenterlineLShapeProfile":{"schemaItemType":"EntityClass","label":"Centerline L-Shape Profile","description":"An L-shaped Profile with rounded corners, similar to cold-formed steel L-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Horizontal leg length, defined parallel to the x axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Vertical leg length, defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Girth","type":"PrimitiveProperty","description":"Length of lips. 0 if profile doesn't have lips, default 0 if not specified.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"CenterlineZShapeProfile":{"schemaItemType":"EntityClass","label":"Centerline Z-Shape Profile","description":"A Z-shaped Profile with rounded corners, similar to cold-formed steel Z-shapes","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of single flange (both flanges have equal width), defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Girth","type":"PrimitiveProperty","description":"Length of lips. 0 if profile doesn't have lips, default 0 if not specified.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"AsymmetricCenterlineZShapeProfile":{"schemaItemType":"EntityClass","label":"Asymmetric Centerline Z-Shape Profile","description":"An asymmetric (about x-axis) Z-shaped Profile with rounded corners, similar to cold-formed steel Z-shapes","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"TopFlangeWidth","type":"PrimitiveProperty","description":"Extent of the top flange, defined parallel to the x axis of the position coordinate system.","label":"Top Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeWidth","type":"PrimitiveProperty","description":"Extent of the bottom flange, defined parallel to the x axis of the position coordinate system.","label":"Bottom Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Girth","type":"PrimitiveProperty","description":"Length of lips. 0 if profile doesn't have lips, default 0 if not specified.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"GirthSlope","type":"PrimitiveProperty","description":"Slope of lips, defined as the angle between the lip and the adjacent flange; 90 degrees means it is perpendicular. 0 if profile doesn't have lips.","label":"Girth Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"BentPlateProfile":{"schemaItemType":"EntityClass","label":"Bent Plate Profile","description":"Profile of a plate that has been bent at a given point with a given angle.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the plate length, defined parallel to the x axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BendAngle","type":"PrimitiveProperty","description":"Inner angle of the bend point. Value is valid in range (0..180) degrees. Values near 180 degrees meaning an almost unbent plate and values near 0 are almost fully bent in half plate.","label":"Bend Angle","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"BendOffset","type":"PrimitiveProperty","description":"Offset from the left edge of the plate defining at what point the plate is bent.","label":"Bend Offset","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius of the bend point.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"CompositeProfile":{"schemaItemType":"EntityClass","label":"Composite Profile","description":"A Profile comprised of multiple SinglePerimeterProfiles.","modifier":"Abstract","baseClass":"Profiles.Profile"},"ArbitraryCompositeProfile":{"schemaItemType":"EntityClass","label":"Arbitrary Composite Profile","description":"A Profile comprised of multiple SinglePerimeterProfiles.","modifier":"Sealed","baseClass":"Profiles.CompositeProfile"},"ArbitraryCompositeProfileComponentAspect":{"schemaItemType":"EntityClass","label":"Arbitrary Composite Profile Component","description":"Aspect used by ArbitraryCompositeProfile to reference SinglePerimeterProfile and store geometry transformations for it.","modifier":"Sealed","baseClass":"BisCore.ElementMultiAspect","properties":[{"name":"Profile","type":"NavigationProperty","description":"Single Profile referenced by ArbitraryCompositeProfile.","label":"Single Profile","category":"Profiles.ProfileProperties","relationshipName":"Profiles.ArbitraryCompositeProfileComponentAspectRefersToSinglePerimeterProfile","direction":"Forward"},{"name":"Offset","type":"PrimitiveProperty","description":"2D vector specifying how the profiles geometry will be offset from it's original coordinates.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"point2d"},{"name":"Rotation","type":"PrimitiveProperty","description":"Angle by which the profiles geometry will be rotated.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"MirrorAboutYAxis","type":"PrimitiveProperty","description":"Flag indicating whether the profiles geometry should be mirrored around the Y axis.","label":"Mirror About Y-Axis","category":"Profiles.ProfileProperties","typeName":"boolean"},{"name":"MemberPriority","type":"PrimitiveProperty","description":"Index used to strictly order components. This property is a duplicate from bis:ElementGroupsMembers.","label":"Member Priority","category":"Profiles.ProfileProperties","typeName":"int"}]},"ArbitraryCompositeProfileComponentAspectRefersToSinglePerimeterProfile":{"schemaItemType":"RelationshipClass","modifier":"Sealed","strength":"Referencing","strengthDirection":"Forward","source":{"multiplicity":"(0..*)","roleLabel":"refers to profile","polymorphic":false,"constraintClasses":["Profiles.ArbitraryCompositeProfileComponentAspect"]},"target":{"multiplicity":"(1..1)","roleLabel":"is referenced by","polymorphic":true,"constraintClasses":["Profiles.SinglePerimeterProfile"]}},"ArbitraryCompositeProfileOwnsArbitraryCompositeProfileComponentAspect":{"schemaItemType":"RelationshipClass","modifier":"Sealed","baseClass":"BisCore.ElementOwnsMultiAspects","strength":"Embedding","strengthDirection":"Forward","source":{"multiplicity":"(1..1)","roleLabel":"owns","polymorphic":false,"constraintClasses":["Profiles.ArbitraryCompositeProfile"]},"target":{"multiplicity":"(1..*)","roleLabel":"is owned by","polymorphic":false,"constraintClasses":["Profiles.ArbitraryCompositeProfileComponentAspect"]}},"DoubleLShapeProfileType":{"schemaItemType":"Enumeration","label":"Double L-Shape Profile Type","type":"int","isStrict":true,"enumerators":[{"name":"LLBB","value":0,"label":"LLBB"},{"name":"SLBB","value":1,"label":"SLBB"}]},"DoubleLShapeProfile":{"schemaItemType":"EntityClass","label":"Double L-Shape Profile","description":"A CompositeProfile comprised of back-to-back Ls with the horizontal legs at the top of the Profile.","modifier":"Sealed","baseClass":"Profiles.CompositeProfile","properties":[{"name":"Spacing","type":"PrimitiveProperty","description":"Distance separating the individual back to back LShapeProfiles.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Type","type":"PrimitiveProperty","description":"Enumeration defining which legs are to be placed back to back.","category":"Profiles.ProfileProperties","typeName":"Profiles.DoubleLShapeProfileType"}]},"LShapeProfileOwnsDoubleLShapeProfile":{"schemaItemType":"RelationshipClass","modifier":"Sealed","baseClass":"BisCore.ElementOwnsChildElements","strength":"Embedding","strengthDirection":"Forward","source":{"multiplicity":"(1..1)","roleLabel":"owns","polymorphic":false,"constraintClasses":["Profiles.LShapeProfile"]},"target":{"multiplicity":"(0..*)","roleLabel":"is owned by","polymorphic":false,"constraintClasses":["Profiles.DoubleLShapeProfile"]}},"DoubleCShapeProfile":{"schemaItemType":"EntityClass","label":"Double C-Shape Profile","description":"A CompositeProfile comprised of back-to-back Cs.","modifier":"Sealed","baseClass":"Profiles.CompositeProfile","properties":[{"name":"Spacing","type":"PrimitiveProperty","description":"Distance separating the individual back to back CShapeProfiles.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"CShapeProfileOwnsDoubleCShapeProfile":{"schemaItemType":"RelationshipClass","modifier":"Sealed","baseClass":"BisCore.ElementOwnsChildElements","strength":"Embedding","strengthDirection":"Forward","source":{"multiplicity":"(1..1)","roleLabel":"owns","polymorphic":false,"constraintClasses":["Profiles.CShapeProfile"]},"target":{"multiplicity":"(0..*)","roleLabel":"is owned by","polymorphic":false,"constraintClasses":["Profiles.DoubleCShapeProfile"]}},"ArbitraryShapeProfile":{"schemaItemType":"EntityClass","label":"Arbitrary Shape Profile","description":"Custom, user defined Profile that can have any shape.","baseClass":"Profiles.SinglePerimeterProfile"},"ArbitraryCenterlineProfile":{"schemaItemType":"EntityClass","label":"Arbitrary Centerline Profile","description":"Profile whose geometry is defined by user provided centerline and thickness that is uniformly applied to that centerline.","modifier":"Sealed","baseClass":"Profiles.ArbitraryShapeProfile","properties":[{"name":"ArcAngle","type":"PrimitiveProperty","description":"Minimum angle for creating an arc. If angle is greater than ArcAngle then arc will be created, otherwise ChamferAngle will be used.","label":"Arc Angle","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"ChamferAngle","type":"PrimitiveProperty","description":"Angle for constructing arcs from tangent lines. If angle is greater than ChamferAngle then curve will be constructed using multiple tangent lines, otherwise lines will be extended until they meet.","label":"Chamfer Angle","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"EllipseProfile":{"schemaItemType":"EntityClass","label":"Ellipse Profile","description":"Solid ellipse shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"XRadius","type":"PrimitiveProperty","description":"The first radius of the ellipse. It is measured along the direction of x axis of the position coordinate system.","label":"X-Axis Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"YRadius","type":"PrimitiveProperty","description":"The second radius of the ellipse. It is measured along the direction of y axis of the position coordinate system.","label":"Y-Axis Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"CircleProfile":{"schemaItemType":"EntityClass","label":"Circle Profile","description":"Solid circle shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Radius","type":"PrimitiveProperty","description":"The radius of the circle.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"HollowCircleProfile":{"schemaItemType":"EntityClass","label":"Hollow Circle Profile","description":"Hollow circle shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Radius","type":"PrimitiveProperty","description":"The radius of the circle.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WallThickness","type":"PrimitiveProperty","description":"Constant thickness of profile walls.","label":"Wall Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"RectangleProfile":{"schemaItemType":"EntityClass","label":"Rectangle Profile","description":"Solid rectangle shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the x-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"RoundedRectangleProfile":{"schemaItemType":"EntityClass","label":"Rounded Rectangle Profile","description":"Solid rectangle shape Profile with rounded corners.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the x-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"RoundingRadius","type":"PrimitiveProperty","description":"Radius of the circular arcs by which all four corners of the rectangle are equally rounded.","label":"Rounding Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"HollowRectangleProfile":{"schemaItemType":"EntityClass","label":"Hollow Rectangle Profile","description":"Hollow rectangle shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the x-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WallThickness","type":"PrimitiveProperty","description":"Constant thickness of profile walls.","label":"Wall Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"InnerFilletRadius","type":"PrimitiveProperty","description":"Radius of the circular arcs, by which all four corners of the inner contour of rectangle are equally rounded. Default 0 (= no rounding arcs) if not specified.","label":"Inner Filler Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"OuterFilletRadius","type":"PrimitiveProperty","description":"Radius of the circular arcs, by which all four corners of the outer contour of rectangle are equally rounded. Default 0 (= no rounding arcs) if not specified.","label":"Outer Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"TrapezoidProfile":{"schemaItemType":"EntityClass","label":"Trapezoid Profile","description":"Trapezoid shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"TopWidth","type":"PrimitiveProperty","description":"Extent of the top line measured along the implicit x-axis.","label":"Top Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomWidth","type":"PrimitiveProperty","description":"Extent of the bottom line measured along the implicit x-axis.","label":"Bottom Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the distance between the parallel bottom and top lines measured along the implicit y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopOffset","type":"PrimitiveProperty","description":"Offset from the beginning of the top line to the bottom line, measured along the implicit x-axis.","label":"Top Offset","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"RegularPolygonProfile":{"schemaItemType":"EntityClass","label":"Regular Polygon Profile","description":"Polygon shape Profile, where all angles and sides of the polygon are equal.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"SideCount","type":"PrimitiveProperty","description":"Count of sides (edges) the polygon is made of. Value cannot be less than 3 or greater than 32.","label":"Side Count","category":"Profiles.ProfileProperties","typeName":"int"},{"name":"SideLength","type":"PrimitiveProperty","description":"Constant length of each polygon side (edge).","label":"Side Length","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"CapsuleProfile":{"schemaItemType":"EntityClass","label":"Capsule Profile","description":"Capsule shape Profile - cylinder with hemispherical ends. Also referred as stadium shape.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the capsule in the direction of the x-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the capsule in the direction of the y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"ParametricDeckProfile":{"schemaItemType":"EntityClass","label":"Parametric Deck Profile","description":"An open Profile of constant thickness","modifier":"Abstract","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Thickness","type":"PrimitiveProperty","description":"Profile Thickness.","label":"Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"CelluralPlateThickness","type":"PrimitiveProperty","description":"Additional plate under the rest of the profile (optional).","label":"Cellural Plate Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"StandardDeckProfile":{"schemaItemType":"EntityClass","label":"Standard Deck Profile","description":"Standard Deck Shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricDeckProfile","properties":[{"name":"Depth","type":"PrimitiveProperty","description":"Depth.","label":"Depth","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlatWidth","type":"PrimitiveProperty","description":"Width of top flat.","label":"Top Flat Width","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomRibWidth","type":"PrimitiveProperty","description":"Width of bottom rib.","label":"Bottom Rib Width","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"CoverageWidth","type":"PrimitiveProperty","description":"Distance between top flat and bottom width.","label":"Coverage Width","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"DiagonalWidth","type":"PrimitiveProperty","description":"Horizontal width of (a single) web diagonal.","label":"Diagonal Width","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"DeepDeckProfile":{"schemaItemType":"EntityClass","label":"Deep Deck Profile","description":"Deep Deck Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricDeckProfile","properties":[{"name":"Depth","type":"PrimitiveProperty","description":"Depth.","label":"Depth","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"CorrugatedDeckProfile":{"schemaItemType":"EntityClass","label":"Corrugated Deck Profile","description":"Corrugated Deck Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricDeckProfile","properties":[{"name":"Depth","type":"PrimitiveProperty","description":"Depth.","label":"Depth","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"SineWaveDeckProfile":{"schemaItemType":"EntityClass","label":"Sine Wave Deck Profile","description":"Sine Wave Deck Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricDeckProfile","properties":[{"name":"Depth","type":"PrimitiveProperty","description":"Depth.","label":"Depth","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WaveLength","type":"PrimitiveProperty","description":"Wave Length.","label":"Wave Length","typeName":"double"}]}}}
+{"$schema":"https://dev.bentley.com/json_schemas/ec/32/ecschema","name":"Profiles","version":"01.00.03","alias":"prf","label":"Profiles","description":"EC Schema for Profiles","references":[{"name":"CoreCustomAttributes","version":"01.00.04"},{"name":"BisCustomAttributes","version":"01.00.00"},{"name":"BisCore","version":"01.00.25"},{"name":"AecUnits","version":"01.00.03"}],"customAttributes":[{"className":"CoreCustomAttributes.ProductionStatus","SupportedUse":"Production"},{"className":"BisCustomAttributes.SchemaLayerInfo","Value":"Common"}],"items":{"ProfileProperties":{"schemaItemType":"PropertyCategory","label":"Profile Properties","description":"Properties of a Structural Profile.","priority":1},"CardinalPoint":{"schemaItemType":"StructClass","label":"Cardinal Point","description":"2D location on the profile used to place and offset profiles when extruding them on curve members.","properties":[{"name":"Name","type":"PrimitiveProperty","description":"Name of the cardinal point, used to reference and distinguish cardinal points. Unique in the scope of a profile.","category":"Profiles.ProfileProperties","typeName":"string"},{"name":"Location","type":"PrimitiveProperty","description":"2D offset from the start of profiles coordinate system (0, 0) defining the location for the cardinal point.","category":"Profiles.ProfileProperties","typeName":"point2d"}]},"Profile":{"schemaItemType":"EntityClass","description":"A resource defining one or more 2D areas that may have voids.","modifier":"Abstract","baseClass":"BisCore.DefinitionElement","properties":[{"name":"Name","type":"PrimitiveProperty","description":"Name of the profile. This property is also used as designation when referencing a profile from standard catalog.","category":"Profiles.ProfileProperties","typeName":"string"},{"name":"Shape","type":"PrimitiveProperty","description":"2D geometry of the profile.","category":"Profiles.ProfileProperties","typeName":"Bentley.Geometry.Common.IGeometry"},{"name":"CardinalPoints","type":"StructArrayProperty","description":"Array of published and custom (user defined) cardinal points of the profile.","label":"Cardinal Points","typeName":"Profiles.CardinalPoint","minOccurs":0,"maxOccurs":2147483647}]},"StandardsOrganization":{"schemaItemType":"EntityClass","label":"Standards Organization","description":"Defines rules for Standard Profiles.","modifier":"Sealed","baseClass":"BisCore.DefinitionContainer"},"Manufacturer":{"schemaItemType":"EntityClass","label":"Manufacturer","description":"Produces structural members defined by Standard Profiles.","modifier":"Sealed","baseClass":"BisCore.DefinitionContainer"},"Revision":{"schemaItemType":"EntityClass","label":"Revision","description":"Revision for a set of Profiles produced by a specific Manufacturer.","modifier":"Sealed","baseClass":"BisCore.DefinitionContainer"},"SinglePerimeterProfile":{"schemaItemType":"EntityClass","label":"Single Perimeter Profile","description":"A Profile with a single outer perimeter.","modifier":"Abstract","baseClass":"Profiles.Profile","mixins":["BisCore.IParentElement"]},"ParametricProfile":{"schemaItemType":"EntityClass","label":"Parametric Profile","description":"A SinglePerimeterProfile that is guaranteed to have the center of the bounding box at (0, 0).","modifier":"Abstract","baseClass":"Profiles.SinglePerimeterProfile"},"CShapeProfile":{"schemaItemType":"EntityClass","label":"C-Shape Profile","description":"A C shaped Profile similar to rolled steel C-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the flange, defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the web, defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Constant wall thickness of flanges.","label":"Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the web.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of the lower edges of the top flange and the upper edges of the bottom flange. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower face of the top flange and of the upper face of the bottom flange. Non-zero in case of tapered flanges, 0 in case of parallel flanges, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"FlangeThicknessDistance","type":"PrimitiveProperty","description":"The distance from flange toe edge to the point at which flange thickness is measured.","label":"Flange Thickness Distance","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["BisCore.IParentElement"]},"IShapeProfile":{"schemaItemType":"EntityClass","label":"I-Shape Profile","description":"An I shaped Profile similar to rolled steel I-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the width (flange length), defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Flange thickness of the I-shape. Both, the upper and the lower flanges have the same thickness and they are centred on the y-axis of the position coordinate system.","label":"Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Web thickness of the I-shape. The web is centred on the x-axis and the y-axis of the position coordinate system.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of the lower edges of the top flange and the upper edges of the bottom flange. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower faces of the top flange and of the upper faces of the bottom flange. Non-zero in case of tapered flanges, 0 in case of parallel flanges, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"FlangeThicknessDistance","type":"PrimitiveProperty","description":"The distance from flange toe edge to the point at which flange thickness is measured.","label":"Flange Thickness Distance","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"AsymmetricIShapeProfile":{"schemaItemType":"EntityClass","description":"An asymmetric (about x-axis) I shaped Profile similar to rolled steel I-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"TopFlangeWidth","type":"PrimitiveProperty","description":"Extent of the top flange, defined parallel to the x axis of the position coordinate system.","label":"Top Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeWidth","type":"PrimitiveProperty","description":"Extent of the bottom flange, defined parallel to the x axis of the position coordinate system.","label":"Bottom Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlangeThickness","type":"PrimitiveProperty","description":"Flange thickness of the top flange.","label":"Top Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeThickness","type":"PrimitiveProperty","description":"Flange thickness of the bottom flange.","label":"Bottom Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Web thickness of the I-shape. The web is centred on the x-axis and the y-axis of the position coordinate system.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlangeFilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the top flange. 0 if sharp-edged, default 0 if not specified.","label":"Top Flange Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of the lower edges of the top flange. 0 if sharp-edged, default 0 if not specified.","label":"Top Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower faces of the top flange. Non-zero in case of of tapered top flange, 0 in case of parallel top flange, default 0 if not specified.","label":"Top Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"TopFlangeThicknessDistance","type":"PrimitiveProperty","description":"The distance from top flange toe edge to the point at which flange thickness is measured.","label":"Top Flange Thickness Distance","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeFilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the bottom flange. 0 if sharp-edged, default 0 if not specified.","label":"Bottom Flange Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of the upper edges of the bottom flange. 0 if sharp-edged, default 0 if not specified.","label":"Bottom Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeSlope","type":"PrimitiveProperty","description":"Slope of the upper faces of the bottom flange. Non-zero in case of of tapered bottom flange, 0 in case of parallel bottom flange, default 0 if not specified.","label":"Bottom Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"BottomFlangeThicknessDistance","type":"PrimitiveProperty","description":"The distance from bottom flange toe edge to the point at which flange thickness is measured.","label":"Bottom Flange Thickness Distance","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"TShapeProfile":{"schemaItemType":"EntityClass","label":"T-Shape Profile","description":"A T-shaped Profile similar to rolled steel T-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the width (top flange), defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the flange.","label":"Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the web.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower face of the flange. Non-zero in case of tapered flange, 0 in case of non-tapered flange, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"FlangeThicknessDistance","type":"PrimitiveProperty","description":"The distance from flange toe edge to the point at which flange thickness is measured.","label":"Flange Thickness Distance","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebEdgeRadius","type":"PrimitiveProperty","description":"Radius of web edges. 0 if sharp-edged, default 0 if not specified.","label":"Web Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebSlope","type":"PrimitiveProperty","description":"Slope of the web. Non-zero in case of tapered web, 0 in case of non-tapered web, default 0 if not specified.","label":"Web Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"WebThicknessDistance","type":"PrimitiveProperty","description":"The distance from web toe edge to the point at which web thickness is measured.","label":"Web Thickness Distance","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"LShapeProfile":{"schemaItemType":"EntityClass","label":"L-Shape Profile","description":"An L-shaped Profile (also referred as Angle) similar to rolled steel L-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Horizontal leg length, defined parallel to the x axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Vertical leg length, defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Thickness","type":"PrimitiveProperty","description":"Constant wall thickness of profile.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Fillet radius between legs. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"EdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"LegSlope","type":"PrimitiveProperty","description":"Slope of the inner faces of the legs. Non-zero in case of tapered legs, 0 in case of perpendicular legs, default 0 if not specified.","label":"Leg Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}],"mixins":["BisCore.IParentElement"]},"TTShapeProfile":{"schemaItemType":"EntityClass","label":"TT-Shape Profile","description":"A TT-shaped Profile similar to double-tee concrete shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the width (top flange), defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the flange.","label":"Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the web.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebSpacing","type":"PrimitiveProperty","description":"Spacing between the two webs.","label":"Web Spacing","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower face of the flange. Non-zero in case of tapered flange, 0 in case of non-tapered flange, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"FlangeThicknessDistance","type":"PrimitiveProperty","description":"The distance from flange toe edge to the point at which flange thickness is measured.","label":"Flange Thickness Distance","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebEdgeRadius","type":"PrimitiveProperty","description":"Radius of web edges. 0 if sharp-edged, default 0 if not specified.","label":"Web Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebSlope","type":"PrimitiveProperty","description":"Slope of the web. Non-zero in case of tapered web, 0 in case of non-tapered web, default 0 if not specified.","label":"Web Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"WebThicknessDistance","type":"PrimitiveProperty","description":"The distance from web toe edge to the point at which web thickness is measured.","label":"Web Thickness Distance","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"SchifflerizedLShapeProfile":{"schemaItemType":"EntityClass","label":"Schifflerized L-Shape Profile","description":"An L-shaped Profile (also referred as Angle) with legs bent at 15 degree angle, making the angle between the legs equal to 60 degrees.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"LegLength","type":"PrimitiveProperty","description":"Leg length. Both vertical and horizontal legs are defined with equal length.","label":"Leg Length","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Thickness","type":"PrimitiveProperty","description":"Constant wall thickness of profile.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"LegBendOffset","type":"PrimitiveProperty","description":"Offset defining where legs are bent. Offset is measured from start of the angle (leg joint) to the outer bending point of the leg. LegBendOffset default value is equal to Thickness plus required offset from the leg joint.","label":"Leg Bend Offset","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Fillet radius between legs. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"EdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"ZShapeProfile":{"schemaItemType":"EntityClass","label":"Z-Shape Profile","description":"A Z-shaped Profile similar to rolled steel Z-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of single flange, defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Constant wall thickness of flanges.","label":"FlangeThickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the web.","label":"WebThickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flanges. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower face of the top flange and of the upper face of the bottom flange. Non-zero in case of tapered flanges, 0 in case of parallel flanges, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"FlangeThicknessDistance","type":"PrimitiveProperty","description":"The distance from flange toe edge to the point at which flange thickness is measured.","label":"Flange Thickness Distance","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"DerivedProfile":{"schemaItemType":"EntityClass","label":"Derived Profile","description":"This class represents a SinglePerimeterProfile that has been converted into a different shape via a matrix transform. Usage outside of IFC compatibility is not recommended","modifier":"Sealed","baseClass":"Profiles.SinglePerimeterProfile","properties":[{"name":"Offset","type":"PrimitiveProperty","description":"2D vector specifying how the profiles geometry will be offset from it's original coordinates.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"point2d"},{"name":"Scale","type":"PrimitiveProperty","description":"A non-uniform scale factor.","category":"Profiles.ProfileProperties","typeName":"point2d"},{"name":"Rotation","type":"PrimitiveProperty","description":"Angle by which the profiles geometry will be rotated.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"MirrorAboutYAxis","type":"PrimitiveProperty","description":"Flag indicating whether the profiles geometry should be mirrored around the Y axis.","label":"Mirror About Y-Axis","category":"Profiles.ProfileProperties","typeName":"boolean"}]},"SinglePerimeterProfileOwnsDerivedProfile":{"schemaItemType":"RelationshipClass","modifier":"Sealed","baseClass":"BisCore.ElementOwnsChildElements","strength":"Embedding","strengthDirection":"Forward","source":{"multiplicity":"(1..1)","roleLabel":"owns","polymorphic":true,"constraintClasses":["Profiles.SinglePerimeterProfile"]},"target":{"multiplicity":"(0..*)","roleLabel":"is owned by","polymorphic":false,"constraintClasses":["Profiles.DerivedProfile"]}},"ICenterlineProfile":{"schemaItemType":"Mixin","label":"Centerline Profile","properties":[{"name":"Centerline","type":"PrimitiveProperty","description":"Non self intersecting centerline defining the geometry of the Profile.","category":"Profiles.ProfileProperties","typeName":"Bentley.Geometry.Common.IGeometry"},{"name":"WallThickness","type":"PrimitiveProperty","description":"Constant thickness that is applied evenly along the Centerline.","label":"Wall Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"appliesTo":"Profiles.Profile"},"CenterlineCShapeProfile":{"schemaItemType":"EntityClass","label":"Centerline C-Shape Profile","description":"A C shaped Profile with rounded corners, similar to cold-formed steel C-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the flange, defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the web, defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Girth","type":"PrimitiveProperty","description":"Length of lips. 0 if profile doesn't have lips, default 0 if not specified.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"CenterlineLShapeProfile":{"schemaItemType":"EntityClass","label":"Centerline L-Shape Profile","description":"An L-shaped Profile with rounded corners, similar to cold-formed steel L-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Horizontal leg length, defined parallel to the x axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Vertical leg length, defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Girth","type":"PrimitiveProperty","description":"Length of lips. 0 if profile doesn't have lips, default 0 if not specified.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"CenterlineZShapeProfile":{"schemaItemType":"EntityClass","label":"Centerline Z-Shape Profile","description":"A Z-shaped Profile with rounded corners, similar to cold-formed steel Z-shapes","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of single flange (both flanges have equal width), defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Girth","type":"PrimitiveProperty","description":"Length of lips. 0 if profile doesn't have lips, default 0 if not specified.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"AsymmetricCenterlineZShapeProfile":{"schemaItemType":"EntityClass","label":"Asymmetric Centerline Z-Shape Profile","description":"An asymmetric (about x-axis) Z-shaped Profile with rounded corners, similar to cold-formed steel Z-shapes","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"TopFlangeWidth","type":"PrimitiveProperty","description":"Extent of the top flange, defined parallel to the x axis of the position coordinate system.","label":"Top Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeWidth","type":"PrimitiveProperty","description":"Extent of the bottom flange, defined parallel to the x axis of the position coordinate system.","label":"Bottom Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Girth","type":"PrimitiveProperty","description":"Length of lips. 0 if profile doesn't have lips, default 0 if not specified.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"GirthSlope","type":"PrimitiveProperty","description":"Slope of lips, defined as the angle between the lip and the adjacent flange; 90 degrees means it is perpendicular. 0 if profile doesn't have lips.","label":"Girth Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"BentPlateProfile":{"schemaItemType":"EntityClass","label":"Bent Plate Profile","description":"Profile of a plate that has been bent at a given point with a given angle.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the plate length, defined parallel to the x axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BendAngle","type":"PrimitiveProperty","description":"Inner angle of the bend point. Value is valid in range (0..180) degrees. Values near 180 degrees meaning an almost unbent plate and values near 0 are almost fully bent in half plate.","label":"Bend Angle","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"BendOffset","type":"PrimitiveProperty","description":"Offset from the left edge of the plate defining at what point the plate is bent.","label":"Bend Offset","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius of the bend point.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"CompositeProfile":{"schemaItemType":"EntityClass","label":"Composite Profile","description":"A Profile comprised of multiple SinglePerimeterProfiles.","modifier":"Abstract","baseClass":"Profiles.Profile"},"ArbitraryCompositeProfile":{"schemaItemType":"EntityClass","label":"Arbitrary Composite Profile","description":"A Profile comprised of multiple SinglePerimeterProfiles.","modifier":"Sealed","baseClass":"Profiles.CompositeProfile"},"ArbitraryCompositeProfileComponentAspect":{"schemaItemType":"EntityClass","label":"Arbitrary Composite Profile Component","description":"Aspect used by ArbitraryCompositeProfile to reference SinglePerimeterProfile and store geometry transformations for it.","modifier":"Sealed","baseClass":"BisCore.ElementMultiAspect","properties":[{"name":"Profile","type":"NavigationProperty","description":"Single Profile referenced by ArbitraryCompositeProfile.","label":"Single Profile","category":"Profiles.ProfileProperties","relationshipName":"Profiles.ArbitraryCompositeProfileComponentAspectRefersToSinglePerimeterProfile","direction":"Forward"},{"name":"Offset","type":"PrimitiveProperty","description":"2D vector specifying how the profiles geometry will be offset from it's original coordinates.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"point2d"},{"name":"Rotation","type":"PrimitiveProperty","description":"Angle by which the profiles geometry will be rotated.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"MirrorAboutYAxis","type":"PrimitiveProperty","description":"Flag indicating whether the profiles geometry should be mirrored around the Y axis.","label":"Mirror About Y-Axis","category":"Profiles.ProfileProperties","typeName":"boolean"},{"name":"MemberPriority","type":"PrimitiveProperty","description":"Index used to strictly order components. This property is a duplicate from bis:ElementGroupsMembers.","label":"Member Priority","category":"Profiles.ProfileProperties","typeName":"int"}]},"ArbitraryCompositeProfileComponentAspectRefersToSinglePerimeterProfile":{"schemaItemType":"RelationshipClass","modifier":"Sealed","strength":"Referencing","strengthDirection":"Forward","source":{"multiplicity":"(0..*)","roleLabel":"refers to profile","polymorphic":false,"constraintClasses":["Profiles.ArbitraryCompositeProfileComponentAspect"]},"target":{"multiplicity":"(1..1)","roleLabel":"is referenced by","polymorphic":true,"constraintClasses":["Profiles.SinglePerimeterProfile"]}},"ArbitraryCompositeProfileOwnsArbitraryCompositeProfileComponentAspect":{"schemaItemType":"RelationshipClass","modifier":"Sealed","baseClass":"BisCore.ElementOwnsMultiAspects","strength":"Embedding","strengthDirection":"Forward","source":{"multiplicity":"(1..1)","roleLabel":"owns","polymorphic":false,"constraintClasses":["Profiles.ArbitraryCompositeProfile"]},"target":{"multiplicity":"(1..*)","roleLabel":"is owned by","polymorphic":false,"constraintClasses":["Profiles.ArbitraryCompositeProfileComponentAspect"]}},"DoubleLShapeProfileType":{"schemaItemType":"Enumeration","label":"Double L-Shape Profile Type","type":"int","isStrict":true,"enumerators":[{"name":"LLBB","value":0,"label":"LLBB"},{"name":"SLBB","value":1,"label":"SLBB"}]},"DoubleLShapeProfile":{"schemaItemType":"EntityClass","label":"Double L-Shape Profile","description":"A CompositeProfile comprised of back-to-back Ls with the horizontal legs at the top of the Profile.","modifier":"Sealed","baseClass":"Profiles.CompositeProfile","properties":[{"name":"Spacing","type":"PrimitiveProperty","description":"Distance separating the individual back to back LShapeProfiles.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Type","type":"PrimitiveProperty","description":"Enumeration defining which legs are to be placed back to back.","category":"Profiles.ProfileProperties","typeName":"Profiles.DoubleLShapeProfileType"}]},"LShapeProfileOwnsDoubleLShapeProfile":{"schemaItemType":"RelationshipClass","modifier":"Sealed","baseClass":"BisCore.ElementOwnsChildElements","strength":"Embedding","strengthDirection":"Forward","source":{"multiplicity":"(1..1)","roleLabel":"owns","polymorphic":false,"constraintClasses":["Profiles.LShapeProfile"]},"target":{"multiplicity":"(0..*)","roleLabel":"is owned by","polymorphic":false,"constraintClasses":["Profiles.DoubleLShapeProfile"]}},"DoubleCShapeProfile":{"schemaItemType":"EntityClass","label":"Double C-Shape Profile","description":"A CompositeProfile comprised of back-to-back Cs.","modifier":"Sealed","baseClass":"Profiles.CompositeProfile","properties":[{"name":"Spacing","type":"PrimitiveProperty","description":"Distance separating the individual back to back CShapeProfiles.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"CShapeProfileOwnsDoubleCShapeProfile":{"schemaItemType":"RelationshipClass","modifier":"Sealed","baseClass":"BisCore.ElementOwnsChildElements","strength":"Embedding","strengthDirection":"Forward","source":{"multiplicity":"(1..1)","roleLabel":"owns","polymorphic":false,"constraintClasses":["Profiles.CShapeProfile"]},"target":{"multiplicity":"(0..*)","roleLabel":"is owned by","polymorphic":false,"constraintClasses":["Profiles.DoubleCShapeProfile"]}},"ArbitraryShapeProfile":{"schemaItemType":"EntityClass","label":"Arbitrary Shape Profile","description":"Custom, user defined Profile that can have any shape.","baseClass":"Profiles.SinglePerimeterProfile"},"ArbitraryCenterlineProfile":{"schemaItemType":"EntityClass","label":"Arbitrary Centerline Profile","description":"Profile whose geometry is defined by user provided centerline and thickness that is uniformly applied to that centerline.","modifier":"Sealed","baseClass":"Profiles.ArbitraryShapeProfile","properties":[{"name":"ArcAngle","type":"PrimitiveProperty","description":"Minimum angle for creating an arc. If angle is greater than ArcAngle then arc will be created, otherwise ChamferAngle will be used.","label":"Arc Angle","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"ChamferAngle","type":"PrimitiveProperty","description":"Angle for constructing arcs from tangent lines. If angle is greater than ChamferAngle then curve will be constructed using multiple tangent lines, otherwise lines will be extended until they meet.","label":"Chamfer Angle","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"EllipseProfile":{"schemaItemType":"EntityClass","label":"Ellipse Profile","description":"Solid ellipse shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"XRadius","type":"PrimitiveProperty","description":"The first radius of the ellipse. It is measured along the direction of x axis of the position coordinate system.","label":"X-Axis Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"YRadius","type":"PrimitiveProperty","description":"The second radius of the ellipse. It is measured along the direction of y axis of the position coordinate system.","label":"Y-Axis Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"CircleProfile":{"schemaItemType":"EntityClass","label":"Circle Profile","description":"Solid circle shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Radius","type":"PrimitiveProperty","description":"The radius of the circle.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"HollowCircleProfile":{"schemaItemType":"EntityClass","label":"Hollow Circle Profile","description":"Hollow circle shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Radius","type":"PrimitiveProperty","description":"The radius of the circle.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WallThickness","type":"PrimitiveProperty","description":"Constant thickness of profile walls.","label":"Wall Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"RectangleProfile":{"schemaItemType":"EntityClass","label":"Rectangle Profile","description":"Solid rectangle shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the x-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"RoundedRectangleProfile":{"schemaItemType":"EntityClass","label":"Rounded Rectangle Profile","description":"Solid rectangle shape Profile with rounded corners.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the x-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"RoundingRadius","type":"PrimitiveProperty","description":"Radius of the circular arcs by which all four corners of the rectangle are equally rounded.","label":"Rounding Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"HollowRectangleProfile":{"schemaItemType":"EntityClass","label":"Hollow Rectangle Profile","description":"Hollow rectangle shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the x-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WallThickness","type":"PrimitiveProperty","description":"Constant thickness of profile walls.","label":"Wall Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"InnerFilletRadius","type":"PrimitiveProperty","description":"Radius of the circular arcs, by which all four corners of the inner contour of rectangle are equally rounded. Default 0 (= no rounding arcs) if not specified.","label":"Inner Filler Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"OuterFilletRadius","type":"PrimitiveProperty","description":"Radius of the circular arcs, by which all four corners of the outer contour of rectangle are equally rounded. Default 0 (= no rounding arcs) if not specified.","label":"Outer Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"TrapezoidProfile":{"schemaItemType":"EntityClass","label":"Trapezoid Profile","description":"Trapezoid shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"TopWidth","type":"PrimitiveProperty","description":"Extent of the top line measured along the implicit x-axis.","label":"Top Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomWidth","type":"PrimitiveProperty","description":"Extent of the bottom line measured along the implicit x-axis.","label":"Bottom Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the distance between the parallel bottom and top lines measured along the implicit y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopOffset","type":"PrimitiveProperty","description":"Offset from the beginning of the top line to the bottom line, measured along the implicit x-axis.","label":"Top Offset","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"RegularPolygonProfile":{"schemaItemType":"EntityClass","label":"Regular Polygon Profile","description":"Polygon shape Profile, where all angles and sides of the polygon are equal.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"SideCount","type":"PrimitiveProperty","description":"Count of sides (edges) the polygon is made of. Value cannot be less than 3 or greater than 32.","label":"Side Count","category":"Profiles.ProfileProperties","typeName":"int"},{"name":"SideLength","type":"PrimitiveProperty","description":"Constant length of each polygon side (edge).","label":"Side Length","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"CapsuleProfile":{"schemaItemType":"EntityClass","label":"Capsule Profile","description":"Capsule shape Profile - cylinder with hemispherical ends. Also referred as stadium shape.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the capsule in the direction of the x-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the capsule in the direction of the y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"ParametricDeckProfile":{"schemaItemType":"EntityClass","label":"Parametric Deck Profile","description":"An open Profile of constant thickness","modifier":"Abstract","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Thickness","type":"PrimitiveProperty","description":"Profile Thickness.","label":"Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"CelluralPlateThickness","type":"PrimitiveProperty","description":"Additional plate under the rest of the profile (optional).","label":"Cellural Plate Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"StandardDeckProfile":{"schemaItemType":"EntityClass","label":"Standard Deck Profile","description":"Standard Deck Shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricDeckProfile","properties":[{"name":"Depth","type":"PrimitiveProperty","description":"Depth.","label":"Depth","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlatWidth","type":"PrimitiveProperty","description":"Width of top flat.","label":"Top Flat Width","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomRibWidth","type":"PrimitiveProperty","description":"Width of bottom rib.","label":"Bottom Rib Width","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"CoverageWidth","type":"PrimitiveProperty","description":"Distance between top flat and bottom width.","label":"Coverage Width","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"DiagonalWidth","type":"PrimitiveProperty","description":"Horizontal width of (a single) web diagonal.","label":"Diagonal Width","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"DeepDeckProfile":{"schemaItemType":"EntityClass","label":"Deep Deck Profile","description":"Deep Deck Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricDeckProfile","properties":[{"name":"Depth","type":"PrimitiveProperty","description":"Depth.","label":"Depth","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"CorrugatedDeckProfile":{"schemaItemType":"EntityClass","label":"Corrugated Deck Profile","description":"Corrugated Deck Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricDeckProfile","properties":[{"name":"Depth","type":"PrimitiveProperty","description":"Depth.","label":"Depth","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"SineWaveDeckProfile":{"schemaItemType":"EntityClass","label":"Sine Wave Deck Profile","description":"Sine Wave Deck Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricDeckProfile","properties":[{"name":"Depth","type":"PrimitiveProperty","description":"Depth.","label":"Depth","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WaveLength","type":"PrimitiveProperty","description":"Wave Length.","label":"Wave Length","typeName":"double"}]}}}

package/Profiles.ecschema.xml

@@ -11,7 +11,7 @@
 
     <ECCustomAttributes>
         <ProductionStatus xmlns="CoreCustomAttributes.01.00.03">
-            <SupportedUse>NotForProduction</SupportedUse>
+            <SupportedUse>Production</SupportedUse>
         </ProductionStatus>
         <SchemaLayerInfo xmlns="BisCustomAttributes.01.00.00">
             <Value>Common</Value>
@@ -64,6 +64,7 @@
         <ECProperty propertyName="FilletRadius" typeName="double" displayLabel="Fillet Radius" description="The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="FlangeEdgeRadius" typeName="double" displayLabel="Flange Edge Radius" description="Radius of the lower edges of the top flange and the upper edges of the bottom flange. 0 if sharp-edged, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="FlangeSlope" typeName="double" displayLabel="Flange Slope" description="Slope of the lower face of the top flange and of the upper face of the bottom flange. Non-zero in case of tapered flanges, 0 in case of parallel flanges, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:ANGLE" />
+        <ECProperty propertyName="FlangeThicknessDistance" typeName="double" displayLabel="Flange Thickness Distance" description="The distance from flange toe edge to the point at which flange thickness is measured." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
     </ECEntityClass>
 
     <ECEntityClass typeName="IShapeProfile" modifier="Sealed" displayLabel="I-Shape Profile" description="An I shaped Profile similar to rolled steel I-shapes.">
@@ -76,6 +77,7 @@
         <ECProperty propertyName="FilletRadius" typeName="double" displayLabel="Fillet Radius" description="The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="FlangeEdgeRadius" typeName="double" displayLabel="Flange Edge Radius" description="Radius of the lower edges of the top flange and the upper edges of the bottom flange. 0 if sharp-edged, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="FlangeSlope" typeName="double" displayLabel="Flange Slope" description="Slope of the lower faces of the top flange and of the upper faces of the bottom flange. Non-zero in case of tapered flanges, 0 in case of parallel flanges, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:ANGLE" />
+        <ECProperty propertyName="FlangeThicknessDistance" typeName="double" displayLabel="Flange Thickness Distance" description="The distance from flange toe edge to the point at which flange thickness is measured." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
     </ECEntityClass>
 
     <ECEntityClass typeName="AsymmetricIShapeProfile" modifier="Sealed" description="An asymmetric (about x-axis) I shaped Profile similar to rolled steel I-shapes.">
@@ -90,9 +92,11 @@
         <ECProperty propertyName="TopFlangeFilletRadius" typeName="double" displayLabel="Top Flange Fillet Radius" description="The fillet radius between the web and the top flange. 0 if sharp-edged, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="TopFlangeEdgeRadius" typeName="double" displayLabel="Top Flange Edge Radius" description="Radius of the lower edges of the top flange. 0 if sharp-edged, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="TopFlangeSlope" typeName="double" displayLabel="Top Flange Slope" description="Slope of the lower faces of the top flange. Non-zero in case of of tapered top flange, 0 in case of parallel top flange, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:ANGLE" />
+        <ECProperty propertyName="TopFlangeThicknessDistance" typeName="double" displayLabel="Top Flange Thickness Distance" description="The distance from top flange toe edge to the point at which flange thickness is measured." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="BottomFlangeFilletRadius" typeName="double" displayLabel="Bottom Flange Fillet Radius" description="The fillet radius between the web and the bottom flange. 0 if sharp-edged, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="BottomFlangeEdgeRadius" typeName="double" displayLabel="Bottom Flange Edge Radius" description="Radius of the upper edges of the bottom flange. 0 if sharp-edged, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="BottomFlangeSlope" typeName="double" displayLabel="Bottom Flange Slope" description="Slope of the upper faces of the bottom flange. Non-zero in case of of tapered bottom flange, 0 in case of parallel bottom flange, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:ANGLE" />
+        <ECProperty propertyName="BottomFlangeThicknessDistance" typeName="double" displayLabel="Bottom Flange Thickness Distance" description="The distance from bottom flange toe edge to the point at which flange thickness is measured." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
     </ECEntityClass>
 
     <ECEntityClass typeName="TShapeProfile" modifier="Sealed" displayLabel="T-Shape Profile" description="A T-shaped Profile similar to rolled steel T-shapes.">
@@ -105,8 +109,10 @@
         <ECProperty propertyName="FilletRadius" typeName="double" displayLabel="Fillet Radius" description="The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="FlangeEdgeRadius" typeName="double" displayLabel="Flange Edge Radius" description="Radius of flange edges. 0 if sharp-edged, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="FlangeSlope" typeName="double" displayLabel="Flange Slope" description="Slope of the lower face of the flange. Non-zero in case of tapered flange, 0 in case of non-tapered flange, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:ANGLE" />
+        <ECProperty propertyName="FlangeThicknessDistance" typeName="double" displayLabel="Flange Thickness Distance" description="The distance from flange toe edge to the point at which flange thickness is measured." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="WebEdgeRadius" typeName="double" displayLabel="Web Edge Radius" description="Radius of web edges. 0 if sharp-edged, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="WebSlope" typeName="double" displayLabel="Web Slope" description="Slope of the web. Non-zero in case of tapered web, 0 in case of non-tapered web, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:ANGLE" />
+        <ECProperty propertyName="WebThicknessDistance" typeName="double" displayLabel="Web Thickness Distance" description="The distance from web toe edge to the point at which web thickness is measured." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
     </ECEntityClass>
 
     <ECEntityClass typeName="LShapeProfile" modifier="Sealed" displayLabel="L-Shape Profile" description="An L-shaped Profile (also referred as Angle) similar to rolled steel L-shapes.">
@@ -132,8 +138,10 @@
         <ECProperty propertyName="FilletRadius" typeName="double" displayLabel="Fillet Radius" description="The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="FlangeEdgeRadius" typeName="double" displayLabel="Flange Edge Radius" description="Radius of flange edges. 0 if sharp-edged, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="FlangeSlope" typeName="double" displayLabel="Flange Slope" description="Slope of the lower face of the flange. Non-zero in case of tapered flange, 0 in case of non-tapered flange, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:ANGLE" />
+        <ECProperty propertyName="FlangeThicknessDistance" typeName="double" displayLabel="Flange Thickness Distance" description="The distance from flange toe edge to the point at which flange thickness is measured." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="WebEdgeRadius" typeName="double" displayLabel="Web Edge Radius" description="Radius of web edges. 0 if sharp-edged, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="WebSlope" typeName="double" displayLabel="Web Slope" description="Slope of the web. Non-zero in case of tapered web, 0 in case of non-tapered web, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:ANGLE" />
+        <ECProperty propertyName="WebThicknessDistance" typeName="double" displayLabel="Web Thickness Distance" description="The distance from web toe edge to the point at which web thickness is measured." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
     </ECEntityClass>
 
     <ECEntityClass typeName="SchifflerizedLShapeProfile" modifier="Sealed" displayLabel="Schifflerized L-Shape Profile" description="An L-shaped Profile (also referred as Angle) with legs bent at 15 degree angle, making the angle between the legs equal to 60 degrees.">
@@ -156,6 +164,7 @@
         <ECProperty propertyName="FilletRadius" typeName="double" displayLabel="Fillet Radius" description="The fillet radius between the web and the flanges. 0 if sharp-edged, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="FlangeEdgeRadius" typeName="double" displayLabel="Flange Edge Radius" description="Radius of flange edges. 0 if sharp-edged, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="FlangeSlope" typeName="double" displayLabel="Flange Slope" description="Slope of the lower face of the top flange and of the upper face of the bottom flange. Non-zero in case of tapered flanges, 0 in case of parallel flanges, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:ANGLE" />
+        <ECProperty propertyName="FlangeThicknessDistance" typeName="double" displayLabel="Flange Thickness Distance" description="The distance from flange toe edge to the point at which flange thickness is measured." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
     </ECEntityClass>
 
     <ECEntityClass typeName="DerivedProfile" modifier="Sealed" displayLabel="Derived Profile" description="This class represents a SinglePerimeterProfile that has been converted into a different shape via a matrix transform. Usage outside of IFC compatibility is not recommended">

package/Profiles.remarks.md

@@ -99,9 +99,11 @@ In addition, such Profiles have a bounding box which is centered at the center o
 
 ### CShapeProfile
 **Derivative properties:**
-- `FlangeInnerEdgeLength` = `FlangeWidth` - `WebThickness`
-- `FlangeSlopeHeight` = `FlangeInnerEdgeLength` * Tan(`FlangeSlope`)
-- `WebInnerEdgeLength` = `Depth` - `FlangeThickness` * 2
+- `FlangeInnerEdgeWidth` = `FlangeWidth` - `WebThickness`
+- `ThicknessAtToe` = `FlangeThickness` - `FlangeThicknessDistance` * Tan(`FlangeSlope`)
+- `WebInnerEdgeLength` = `Depth` - `FlangeThickness` * 2 - (`FlangeInnerEdgeWidth` - `FlangeThicknessDistance`) * Tan(`FlangeSlope`) * 2
+
+Note that `FlangeEdgeRadius` can be bigger than `FlangeThickness`.
 
 **Constraints:**
 - `FlangeWidth` must be greater than zero
@@ -114,28 +116,30 @@ In addition, such Profiles have a bounding box which is centered at the center o
   - must be less than `FlangeWidth`
 - `FilletRadius` (if set):
   - must be greater or equal to zero
-  - must be less or equal to half of `FlangeInnerEdgeLength`
-  - must be less or equal to half of `WebInnerEdgeLength` minus `FlangeSlopeHeight`
+  - must be less or equal to half of `FlangeInnerEdgeWidth`
+  - must be less or equal to half of `WebInnerEdgeLength`
 - `FlangeEdgeRadius` (if set):
   - must be greater or equal to zero
-  - must be less or equal to half of `FlangeInnerEdgeLength`
-  - must be less or equal to `FlangeThickness`
+  - must be less or equal to half of `FlangeInnerEdgeWidth`
 - `FlangeSlope` (if set):
   - must be greater or equal to zero
   - must be less than ninety degrees
-  - `FlangeSlopeHeight` must be less or equal to `WebInnerEdgeLength`
-  - `FlangeSlopeHeight` must be less or equal to double `FlangeThickness`
+  - `WebInnerEdgeLength` must be greater or equal to zero
+  - `ThicknessAtToe` must be greater or equal to zero
+- `FlangeThicknessDistance` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to `FlangeInnerEdgeWidth`
 
 ![CShape (only mandatory properties)](media/ProfilePictures/CShape1.png)
 ![CShape (all properties)](media/ProfilePictures/CShape2.png)
 
 ### AsymmetricIShapeProfile
 **Derivative properties:**
-- `WebEdgeLength` = `Depth` - `TopFlangeThickness` - `BottomFlangeThickness`
-- `TopFlangeInnerEdgeLength` = (`TopFlangeWidth` - `WebThickness`) / 2
-- `BottomFlangeInnerEdgeLength` = (`BottomFlangeWidth` - `WebThickness`) / 2
-- `TopFlangeSlopeHeight` = `TopFlangeInnerEdgeLength` * Tan(`TopFlangeSlope`)
-- `BottomFlangeSlopeHeight` = `BottomFlangeInnerEdgeLength` * Tan(`BottomFlangeSlope`)
+- `WebEdgeLength` = `Depth` - `TopFlangeThickness` - (`TopFlangeInnerEdgeWidth` - `TopFlangeThicknessDistance`) * Tan(`TopFlangeSlope`) - `BottomFlangeThickness` - (`BottomFlangeInnerEdgeWidth` - `BottomFlangeThicknessDistance`) * Tan(`BottomFlangeSlope`)
+- `TopFlangeInnerEdgeWidth` = (`TopFlangeWidth` - `WebThickness`) / 2
+- `BottomFlangeInnerEdgeWidth` = (`BottomFlangeWidth` - `WebThickness`) / 2
+- `TopFlangeThicknessAtToe` = `TopFlangeThickness` - `TopFlangeThicknessDistance` * Tan(`TopFlangeSlope`)
+- `BottomFlangeThicknessAtToe` = `BottomFlangeThickness` - `BottomFlangeThicknessDistance` * Tan(`BottomFlangeSlope`)
 
 **Constraints:**
 - `TopFlangeWidth` must be greater than zero
@@ -153,39 +157,47 @@ In addition, such Profiles have a bounding box which is centered at the center o
   - must be less than `BottomFlangeWidth`
 - `TopFlangeFilletRadius` (if set):
   - must be greater or equal to zero
-  - must be less or equal to half `WebEdgeLength` minus `TopFlangeSlopeHeight`
-  - must be less or equal to half `TopFlangeInnerEdgeLength`
+  - must be less or equal to half `WebEdgeLength`
+  - must be less or equal to half `TopFlangeInnerEdgeWidth`
 - `TopFlangeEdgeRadius` (if set):
   - must be greater or equal to zero
-  - must be less or equal to `TopFlangeThickness`
-  - must be less or equal to half `TopFlangeInnerEdgeLength`
+  - must be less or equal to `TopFlangeThicknessAtToe`
+  - must be less or equal to `TopFlangeInnerEdgeWidth`
 - `TopFlangeSlope` (if set):
   - must be greater or equal to zero
   - must be less than ninety degrees
-  - `TopFlangeSlopeHeight` must be less or equal to `WebEdgeLength`
-  - `TopFlangeSlopeHeight` must be less or equal to double `TopFlangeThickness`
+  - `WebEdgeLength` must be greater or equal to zero
+  - `TopFlangeThicknessAtToe` must be greater or equal to zero
+- `TopFlangeThicknessDistance` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to `TopFlangeInnerEdgeWidth`
 - `BottomFlangeFilletRadius` (if set):
   - must be greater or equal to zero
-  - must be less or equal to half `WebEdgeLength` minus `BottomFlangeSlopeHeight`
-  - must be less or equal to half `BottomFlangeInnerEdgeLength`
+  - must be less or equal to half `WebEdgeLength`
+  - must be less or equal to half `BottomFlangeInnerEdgeWidth`
 - `BottomFlangeEdgeRadius` (if set):
   - must be greater or equal to zero
-  - must be less or equal to `BottomFlangeThickness`
-  - must be less or equal to half `BottomFlangeInnerEdgeLength`
+  - must be less or equal to `BottomFlangeThicknessAtToe`
+  - must be less or equal to `BottomFlangeInnerEdgeWidth`
 - `BottomFlangeSlope` (if set):
   - must be greater or equal to zero
   - must be less than ninety degrees
-  - `BottomFlangeSlopeHeight` must be less or equal to `WebEdgeLength`
-  - `BottomFlangeSlopeHeight` must be less or equal to double `BottomFlangeThickness`
+  - `WebEdgeLength` must be greater or equal to zero
+  - `BottomFlangeThicknessAtToe` must be greater or equal to zero
+- `BottomFlangeThicknessDistance` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to `BottomFlangeInnerEdgeWidth`
 
 ![AsymmetricIShape (only mandatory properties)](media/ProfilePictures/AsymmetricIShape1.png)
 ![AsymmetricIShape (all properties)](media/ProfilePictures/AsymmetricIShape2.png)
 
 ### IShapeProfile
 **Derivative properties:**
-- `FlangeInnerEdgeLength` = (`FlangeWidth` - `WebThickness`) / 2
-- `FlangeSlopeHeight` = `FlangeInnerEdgeLength` * Tan(`FlangeSlope`)
-- `WebEdgeLength` = `Depth` - `FlangeThickness` * 2
+- `FlangeInnerEdgeWidth` = (`FlangeWidth` - `WebThickness`) / 2
+- `WebEdgeLength` = `Depth` - `FlangeThickness` * 2 - (`FlangeInnerEdgeWidth` - `FlangeThicknessDistance`) * Tan(`TopFlangeSlope`) * 2
+- `FlangeThicknessAtToe` = `FlangeThickness` - `FlangeThicknessDistance` * Tan(`TopFlangeSlope`)
+
+Note that `FlangeEdgeRadius` can be bigger than `FlangeThickness`.
 
 **Constraints:**
 - `FlangeWidth` must be greater than zero
@@ -198,27 +210,32 @@ In addition, such Profiles have a bounding box which is centered at the center o
   - must be less than `FlangeWidth`
 - `FilletRadius` (if set):
   - must be greater or equal to zero
-  - must be less or equal to half `FlangeInnerEdgeLength`
-  - must be less or equal to half `WebEdgeLength` minus `FlangeSlopeHeight`
+  - must be less or equal to half `FlangeInnerEdgeWidth`
+  - must be less or equal to half `WebEdgeLength`
 - `FlangeEdgeRadius` (if set):
   - must be greater or equal to zero
-  - must be less or equal to half `FlangeInnerEdgeLength`
-  - must be less or equal to `FlangeThickness`
+  - must be less or equal to half `FlangeInnerEdgeWidth`
 - `FlangeSlope` (if set):
   - must be greater or equal to zero
   - must be less than ninety degrees
-  - `FlangeSlopeHeight` must be less or equal to `WebEdgeLength`
-  - `FlangeSlopeHeight` must be less or equal to double `FlangeThickness`
+  - `WebEdgeLength` must be greater or equal to zero
+  - `FlangeThicknessAtToe` must be greater or equal to zero
+- `FlangeThicknessDistance` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to `FlangeInnerEdgeWidth`
 
 ![IShape (only mandatory properties)](media/ProfilePictures/IShape1.png)
 ![IShape (all properties)](media/ProfilePictures/IShape2.png)
 
 ### TShapeProfile
 **Derivative properties:**
-- `FlangeInnerEdgeLength` = (`FlangeWidth` - `WebThickness`) / 2
-- `FlangeSlopeHeight` = `FlangeInnerEdgeLength` * Tan(`FlangeSlope`)
-- `WebEdgeLength` = `Depth` - `FlangeThickness`
-- `WebSlopeHeight` = `WebEdgeLength` * Tan(`WebSlope`)
+- `FlangeInnerEdgeWidth` = (`FlangeWidth` - `WebThickness`) / 2
+- `FlangeThicknessAtToe` = `FlangeThickness` - `FlangeThicknessDistance` * Tan(`FlangeSlope`)
+- `WebEdgeWidth` = `Depth` - `FlangeThickness` - (`FlangeInnerEdgeWidth` - `FlangeThicknessDistance`) * Tan(`FlangeSlope`)
+- `WebSlopeHeight` = `WebEdgeWidth` * Tan(`WebSlope`)
+- `WebThicknessAtToe` = `WebThickness` - `WebThicknessDistance` * Tan(`WebSlope`) * 2
+
+Note that `FlangeEdgeRadius` can be bigger than `FlangeThickness`.
 
 **Constraints:**
 - `FlangeWidth` must be greater than zero
@@ -231,26 +248,31 @@ In addition, such Profiles have a bounding box which is centered at the center o
   - must be less than `FlangeWidth`
 - `FilletRadius` (if set):
   - must be greater or equal to zero
-  - must be less or equal to half `FlangeInnerEdgeLength` minus `WebSlopeHeight`
-  - must be less or equal to half `WebEdgeLength` minus `FlangeSlopeHeight`
+  - must be less or equal to half `FlangeInnerEdgeWidth` minus `WebSlopeHeight`
+  - must be less or equal to half `WebEdgeWidth`
 - `FlangeEdgeRadius`
   - must be greater or equal to zero
-  - must be less or equal to half `FlangeInnerEdgeLength`
-  - must be less or equal to `FlangeThickness`
+  - must be less or equal to half `FlangeInnerEdgeWidth`
 - `FlangeSlope` (if set):
   - must be greater or equal to zero
   - must be less than ninety degrees
-  - `FlangeSlopeHeight` must be less or equal to `WebEdgeLength`
-  - `FlangeSlopeHeight` must be less or equal to double `FlangeThickness`
+  - `WebEdgeWidth` must be greater or equal to zero
+  - `FlangeThicknessAtToe` must be greater or equal to zero
+- `FlangeThicknessDistance` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to `FlangeInnerEdgeWidth`
 - `WebEdgeRadius` (if set):
   - must be greater or equal to zero
-  - must be less or equal to half `WebEdgeLength`
-  - must be less or equal to half `WebThickness`
+  - must be less or equal to half `WebEdgeWidth`
+  - must be less or equal to half `WebThicknessAtToe`
 - `WebSlope` (if set):
   - must be greater or equal to zero
   - must be less than ninety degrees
-  - `WebSlopeHeight` must be less or equal to `FlangeInnerEdgeLength`
-  - `WebSlopeHeight` must be less or equal to `WebThickness`
+  - `WebSlopeHeight` must be less or equal to `FlangeInnerEdgeWidth`
+  - `WebThicknessAtToe` must be greater or equal to zero
+- `WebThicknessDistance` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to `WebEdgeWidth`
 
 ![TShape (only mandatory properties)](media/ProfilePictures/TShape1.png)
 ![TShape (all properties)](media/ProfilePictures/TShape2.png)
@@ -262,7 +284,7 @@ In addition, such Profiles have a bounding box which is centered at the center o
 - `VerticalLegInnerEdgeLength` = `Depth` - `Thickness`
 - `VerticalLegSlopeHeight` = `VerticalLegInnerEdgeLength` * Tan(`LegSlope`)
 
-Note that `EdgeRadius` can be bigger than thickness.
+Note that `EdgeRadius` can be bigger than `Thickness`.
 
 **Constraints:**
 - `Width` must be greater than zero
@@ -292,12 +314,14 @@ Note that `EdgeRadius` can be bigger than thickness.
 
 ### TTShapeProfile
 **Derivative properties:**
-- `FlangeInnerFaceLength` = (`FlangeWidth` - 2 * `WebThickness` - `WebSpacing`) / 2
-- `FlangeSlopeHeight` = `FlangeInnerFaceLength` * Tan(`FlangeSlope`)
-- `WebOuterFaceLength` = `Depth` - `FlangeThickness` + `FlangeSlopeHeight` / 2
-- `WebInnerFaceLength` = `Depth` - `FlangeThickness` - `FlangeSlopeHeight` / 2
-- `WebOuterSlopeHeight` = `WebOuterFaceLength` * Tan(`WebSlope`)
-- `WebInnerSlopeHeight` = `WebInnerFaceLength` * Tan(`WebSlope`)
+- `FlangeInnerFaceWidth` = (`FlangeWidth` - 2 * `WebThickness` - `WebSpacing`) / 2
+- `FlangeSlopeHeight` = `FlangeInnerFaceWidth` * Tan(`FlangeSlope`)
+- `FlangeThicknessAtToe` = `FlangeThickness` - `FlangeThicknessDistance` * Tan(`FlangeSlope`)
+- `WebOuterFaceWidth` = `Depth` - `FlangeThickness` + `FlangeThicknessDistance` * Tan(`FlangeSlope`)
+- `WebInnerFaceWidth` = `Depth` - `FlangeThickness` - (`FlangeThickness` - `FlangeThicknessDistance`) * Tan(`FlangeSlope`)
+- `WebOuterSlopeHeight` = `WebOuterFaceWidth` * Tan(`WebSlope`)
+- `WebInnerSlopeHeight` = `WebInnerFaceWidth` * Tan(`WebSlope`)
+- `WebThicknessAtToe` = `WebThickness` - `WebThicknessDistance` * Tan(`WebSlope`) * 2
 
 **Constraints:**
 - `FlangeWidth` must be greater than zero
@@ -313,34 +337,40 @@ Note that `EdgeRadius` can be bigger than thickness.
   - must be less than `FlangeWidth` minus two times `WebThickness`
 - `FilletRadius` (if set):
   - must be greater or equal to zero
-  - must be less or equal to half `FlangeInnerFaceLength` minus `WebOuterSlopeHeight`
-  - must be less or equal to half `OuterFaceLength` minus `FlangeSlopeHeight`
+  - must be less or equal to half `FlangeInnerFaceWidth` minus `WebOuterSlopeHeight`
+  - must be less or equal to half `WebOuterFaceWidth` minus `FlangeSlopeHeight`
 - `FlangeEdgeRadius` (if set):
   - must be greater or equal to zero
-  - must be less or equal to `FlangeThickness`
-  - must be less or equal to half `FlangeInnerFaceLength`
+  - must be less or equal to `FlangeThicknessAtToe`
+  - must be less or equal to half `FlangeInnerFaceWidth`
 - `FlangeSlope` (if set):
   - must be greater or equal to zero
   - must be less than ninety degrees
-  - `FlangeSlopeHeight` must be less or equal to `WebOuterFaceLength`
-  - `FlangeSlopeHeight` must be less or equal to double `FlangeThickness`
+  - `FlangeSlopeHeight` must be less or equal to `WebOuterFaceWidth`
+  - `FlangeThicknessAtToe` must be greater or equal to zero
+- `FlangeThicknessDistance` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to `FlangeInnerFaceWidth`
 - `WebEdgeRadius` (if set):
   - must be greater or equal to zero
-  - must be less or equal to half `WebThickness`
-  - must be less or equal to half `WebOuterFaceLength`
+  - must be less or equal to half `WebThicknessAtToe`
+  - must be less or equal to half `WebInnerFaceWidth`
 - `WebSlope` (if set):
   - must be greater or equal to zero
   - must be less than ninety degrees
-  - `WebOuterSlopeHeight` must be less or equal to `FlangeInnerFaceLength`
-  - `WebOuterSlopeHeight` must be less or equal to `WebThickness`
+  - `WebOuterSlopeHeight` must be less or equal to `FlangeInnerFaceWidth`
+  - `WebThicknessAtToe` must be greater or equal to zero
   - `WebInnerSlopeHeight` must be less or equal to `WebSpacing`
+- `WebThicknessDistance` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to `WebInnerFaceWidth`
 
 ![TTShape (only mandatory properties)](media/ProfilePictures/TTShape1.png)
 ![TTShape (all properties)](media/ProfilePictures/TTShape2.png)
 
 ### SchifflerizedLShapeProfile
 
-Note that `EdgeRadius` can be bigger than thickness.
+Note that `EdgeRadius` can be bigger than `Thickness`.
 
 **Constraints:**
 - `LegLength` must be greater than zero
@@ -362,9 +392,9 @@ Note that `EdgeRadius` can be bigger than thickness.
 
 ### ZShapeProfile
 **Derivative properties:**
-- `FlangeInnerEdgeLength` = (`FlangeWidth` - `WebThickness`) / 2
-- `FlangeSlopeHeight` = `FlangeInnerEdgeLength` * Tan(`FlangeSlope`)
-- `WebEdgeLength` = `Depth` - `FlangeThickness` * 2
+- `FlangeInnerEdgeWidth` = (`FlangeWidth` - `WebThickness`) / 2
+- `FlangeThicknessAtToe` = `FlangeThickness` - `FlangeThicknessDistance` * Tan(`FlangeSlope`)
+- `WebEdgeLength` = `Depth` - `FlangeThickness` - (`FlangeInnerEdgeWidth` - `FlangeThicknessDistance`) * Tan(`FlangeSlope`)
 
 **Constraints:**
 - `FlangeWidth` must be greater than zero
@@ -377,20 +407,23 @@ Note that `EdgeRadius` can be bigger than thickness.
   - must be less than `FlangeWith`
 - `FilletRadius` (if set):
   - must be greater or equal to zero
-  - must be less or equal to half `FlangeInnerEdgeLength`
-  - must be less or equal to half `WebEdgeLength` minus `FlangeSlopeHeight`
+  - must be less or equal to half `FlangeInnerEdgeWidth`
+  - must be less or equal to half `WebEdgeLength`
 - `FlangeEdgeRadius` (if set):
   - must be greater or equal to zero
-  - must be less or equal to `FlangeThickness`
-  - must be less or equal to half `FlangeInnerEdgeLength`
+  - must be less or equal to `FlangeThicknessAtToe`
+  - must be less or equal to half `FlangeInnerEdgeWidth`
 - `FlangeSlope` (if set):
   - must be greater or equal to zero
   - must be less than ninety degrees
-  - `FlangeSlopeHeight` must be less or equal to `WebEdgeLength`
-  - `FlangeSlopeHeight` must be less or equal to double `FlangeThickness`
+  - `WebEdgeLength` must be greater or equal to zero
+  - `FlangeThicknessAtToe` must be greater or equal to zero
+- `FlangeThicknessDistance` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to `FlangeInnerEdgeWidth`
 
-![ZShape (only mandatory properties)](media/ProfilePictures/ZShape2.png)
-![ZShape (all properties)](media/ProfilePictures/ZShape1.png)
+![ZShape (only mandatory properties)](media/ProfilePictures/ZShape1.png)
+![ZShape (all properties)](media/ProfilePictures/ZShape2.png)
 
 ### DerivedProfile
 [SinglePerimeterProfile](#singleperimeterprofile) that is based on another [SinglePerimeterProfile](#singleperimeterprofile) with applied standard transformations (scale, rotation, translation, mirror). This [Profile](#profile) is defined for compatibility reasons with [IFC](#https://standards.buildingsmart.org/IFC/RELEASE/IFC4/FINAL/HTML/) and its **usage is not recommended**.

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@bentley/profiles-schema",
   "license": "MIT",
-  "version": "1.0.3-dev.3",
+  "version": "1.0.3",
   "homepage": "https://www.itwinjs.org/",
   "keywords": [
     "Bentley",
@@ -12,5 +12,9 @@
   "author": {
     "name": "Bentley Systems, Inc.",
     "url": "http://www.bentley.com"
+  },
+  "exports" : {
+     "./Profiles.ecschema.xml": "./Profiles.ecschema.xml",
+     "./Profiles.ecschema.json": "./Profiles.ecschema.json"
   }
 }