@bentley/profiles-schema 1.0.3-dev.1 → 1.0.3-dev.2

package/LICENSE.md

@@ -1,6 +1,6 @@
 # MIT License
 
-Copyright © 2017-2023 Bentley Systems, Incorporated. All rights reserved.
+Copyright © 2017-2025 Bentley Systems, Incorporated. All rights reserved.
 
 Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
 

package/Profiles.ecschema.json

@@ -1 +1 @@
-{"$schema":"https://dev.bentley.com/json_schemas/ec/32/ecschema","name":"Profiles","version":"01.00.03","alias":"prf","label":"Profiles","description":"EC Schema for Profiles","references":[{"name":"CoreCustomAttributes","version":"01.00.05"},{"name":"BisCustomAttributes","version":"01.00.00"},{"name":"BisCore","version":"01.00.17"},{"name":"AecUnits","version":"01.00.04"}],"customAttributes":[{"className":"CoreCustomAttributes.ProductionStatus","SupportedUse":"NotForProduction"},{"className":"BisCustomAttributes.SchemaLayerInfo","Value":"Common"}],"items":{"ProfileProperties":{"schemaItemType":"PropertyCategory","label":"Profile Properties","description":"Properties of a Structural Profile.","priority":1},"CardinalPoint":{"schemaItemType":"StructClass","label":"Cardinal Point","description":"2D location on the profile used to place and offset profiles when extruding them on curve members.","properties":[{"name":"Name","type":"PrimitiveProperty","description":"Name of the cardinal point, used to reference and distinguish cardinal points. Unique in the scope of a profile.","category":"Profiles.ProfileProperties","typeName":"string"},{"name":"Location","type":"PrimitiveProperty","description":"2D offset from the start of profiles coordinate system (0, 0) defining the location for the cardinal point.","category":"Profiles.ProfileProperties","typeName":"point2d"}]},"Profile":{"schemaItemType":"EntityClass","description":"A resource defining one or more 2D areas that may have voids.","modifier":"Abstract","baseClass":"BisCore.DefinitionElement","properties":[{"name":"Name","type":"PrimitiveProperty","description":"Name of the profile. This property is also used as designation when referencing a profile from standard catalog.","category":"Profiles.ProfileProperties","typeName":"string"},{"name":"Shape","type":"PrimitiveProperty","description":"2D geometry of the profile.","category":"Profiles.ProfileProperties","typeName":"Bentley.Geometry.Common.IGeometry"},{"name":"CardinalPoints","type":"StructArrayProperty","description":"Array of published and custom (user defined) cardinal points of the profile.","label":"Cardinal Points","typeName":"Profiles.CardinalPoint","minOccurs":0,"maxOccurs":2147483647}]},"StandardsOrganization":{"schemaItemType":"EntityClass","label":"Standards Organization","description":"Defines rules for Standard Profiles.","modifier":"Sealed","baseClass":"BisCore.DefinitionContainer"},"Manufacturer":{"schemaItemType":"EntityClass","label":"Manufacturer","description":"Produces structural members defined by Standard Profiles.","modifier":"Sealed","baseClass":"BisCore.DefinitionContainer"},"Revision":{"schemaItemType":"EntityClass","label":"Revision","description":"Revision for a set of Profiles produced by a specific Manufacturer.","modifier":"Sealed","baseClass":"BisCore.DefinitionContainer"},"SinglePerimeterProfile":{"schemaItemType":"EntityClass","label":"Single Perimeter Profile","description":"A Profile with a single outer perimeter.","modifier":"Abstract","baseClass":"Profiles.Profile","mixins":["BisCore.IParentElement"]},"ParametricProfile":{"schemaItemType":"EntityClass","label":"Parametric Profile","description":"A SinglePerimeterProfile that is guaranteed to have the center of the bounding box at (0, 0).","modifier":"Abstract","baseClass":"Profiles.SinglePerimeterProfile"},"CShapeProfile":{"schemaItemType":"EntityClass","label":"C-Shape Profile","description":"A C shaped Profile similar to rolled steel C-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the flange, defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the web, defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Constant wall thickness of flanges.","label":"Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the web.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of the lower edges of the top flange and the upper edges of the bottom flange. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower face of the top flange and of the upper face of the bottom flange. Non-zero in case of tapered flanges, 0 in case of parallel flanges, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}],"mixins":["BisCore.IParentElement"]},"IShapeProfile":{"schemaItemType":"EntityClass","label":"I-Shape Profile","description":"An I shaped Profile similar to rolled steel I-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the width (flange length), defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Flange thickness of the I-shape. Both, the upper and the lower flanges have the same thickness and they are centred on the y-axis of the position coordinate system.","label":"Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Web thickness of the I-shape. The web is centred on the x-axis and the y-axis of the position coordinate system.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of the lower edges of the top flange and the upper edges of the bottom flange. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower faces of the top flange and of the upper faces of the bottom flange. Non-zero in case of tapered flanges, 0 in case of parallel flanges, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}]},"AsymmetricIShapeProfile":{"schemaItemType":"EntityClass","description":"An asymmetric (about x-axis) I shaped Profile similar to rolled steel I-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"TopFlangeWidth","type":"PrimitiveProperty","description":"Extent of the top flange, defined parallel to the x axis of the position coordinate system.","label":"Top Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeWidth","type":"PrimitiveProperty","description":"Extent of the bottom flange, defined parallel to the x axis of the position coordinate system.","label":"Bottom Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlangeThickness","type":"PrimitiveProperty","description":"Flange thickness of the top flange.","label":"Top Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeThickness","type":"PrimitiveProperty","description":"Flange thickness of the bottom flange.","label":"Bottom Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Web thickness of the I-shape. The web is centred on the x-axis and the y-axis of the position coordinate system.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlangeFilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the top flange. 0 if sharp-edged, default 0 if not specified.","label":"Top Flange Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of the lower edges of the top flange. 0 if sharp-edged, default 0 if not specified.","label":"Top Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower faces of the top flange. Non-zero in case of of tapered top flange, 0 in case of parallel top flange, default 0 if not specified.","label":"Top Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"BottomFlangeFilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the bottom flange. 0 if sharp-edged, default 0 if not specified.","label":"Bottom Flange Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of the upper edges of the bottom flange. 0 if sharp-edged, default 0 if not specified.","label":"Bottom Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeSlope","type":"PrimitiveProperty","description":"Slope of the upper faces of the bottom flange. Non-zero in case of of tapered bottom flange, 0 in case of parallel bottom flange, default 0 if not specified.","label":"Bottom Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}]},"TShapeProfile":{"schemaItemType":"EntityClass","label":"T-Shape Profile","description":"A T-shaped Profile similar to rolled steel T-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the width (top flange), defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the flange.","label":"Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the web.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower face of the flange. Non-zero in case of tapered flange, 0 in case of non-tapered flange, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"WebEdgeRadius","type":"PrimitiveProperty","description":"Radius of web edges. 0 if sharp-edged, default 0 if not specified.","label":"Web Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebSlope","type":"PrimitiveProperty","description":"Slope of the web. Non-zero in case of tapered web, 0 in case of non-tapered web, default 0 if not specified.","label":"Web Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}]},"LShapeProfile":{"schemaItemType":"EntityClass","label":"L-Shape Profile","description":"An L-shaped Profile (also referred as Angle) similar to rolled steel L-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Horizontal leg length, defined parallel to the x axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Vertical leg length, defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Thickness","type":"PrimitiveProperty","description":"Constant wall thickness of profile.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Fillet radius between legs. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"EdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"LegSlope","type":"PrimitiveProperty","description":"Slope of the inner faces of the legs. Non-zero in case of tapered legs, 0 in case of perpendicular legs, default 0 if not specified.","label":"Leg Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}],"mixins":["BisCore.IParentElement"]},"TTShapeProfile":{"schemaItemType":"EntityClass","label":"TT-Shape Profile","description":"A TT-shaped Profile similar to double-tee concrete shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the width (top flange), defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the flange.","label":"Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the web.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebSpacing","type":"PrimitiveProperty","description":"Spacing between the two webs.","label":"Web Spacing","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower face of the flange. Non-zero in case of tapered flange, 0 in case of non-tapered flange, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"WebEdgeRadius","type":"PrimitiveProperty","description":"Radius of web edges. 0 if sharp-edged, default 0 if not specified.","label":"Web Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebSlope","type":"PrimitiveProperty","description":"Slope of the web. Non-zero in case of tapered web, 0 in case of non-tapered web, default 0 if not specified.","label":"Web Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}]},"SchifflerizedLShapeProfile":{"schemaItemType":"EntityClass","label":"Schifflerized L-Shape Profile","description":"An L-shaped Profile (also referred as Angle) with legs bent at 15 degree angle, making the angle between the legs equal to 60 degrees.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"LegLength","type":"PrimitiveProperty","description":"Leg length. Both vertical and horizontal legs are defined with equal length.","label":"Leg Length","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Thickness","type":"PrimitiveProperty","description":"Constant wall thickness of profile.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"LegBendOffset","type":"PrimitiveProperty","description":"Offset defining where legs are bent. Offset is measured from start of the angle (leg joint) to the outer bending point of the leg. LegBendOffset default value is equal to Thickness plus required offset from the leg joint.","label":"Leg Bend Offset","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Fillet radius between legs. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"EdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"ZShapeProfile":{"schemaItemType":"EntityClass","label":"Z-Shape Profile","description":"A Z-shaped Profile similar to rolled steel Z-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of single flange, defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Constant wall thickness of flanges.","label":"FlangeThickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the web.","label":"WebThickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flanges. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower face of the top flange and of the upper face of the bottom flange. Non-zero in case of tapered flanges, 0 in case of parallel flanges, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}]},"DerivedProfile":{"schemaItemType":"EntityClass","label":"Derived Profile","description":"This class represents a SinglePerimeterProfile that has been converted into a different shape via a matrix transform. Usage outside of IFC compatibility is not recommended","modifier":"Sealed","baseClass":"Profiles.SinglePerimeterProfile","properties":[{"name":"Offset","type":"PrimitiveProperty","description":"2D vector specifying how the profiles geometry will be offset from it's original coordinates.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"point2d"},{"name":"Scale","type":"PrimitiveProperty","description":"A non-uniform scale factor.","category":"Profiles.ProfileProperties","typeName":"point2d"},{"name":"Rotation","type":"PrimitiveProperty","description":"Angle by which the profiles geometry will be rotated.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"MirrorAboutYAxis","type":"PrimitiveProperty","description":"Flag indicating whether the profiles geometry should be mirrored around the Y axis.","label":"Mirror About Y-Axis","category":"Profiles.ProfileProperties","typeName":"boolean"}]},"SinglePerimeterProfileOwnsDerivedProfile":{"schemaItemType":"RelationshipClass","modifier":"Sealed","baseClass":"BisCore.ElementOwnsChildElements","strength":"Embedding","strengthDirection":"Forward","source":{"multiplicity":"(1..1)","roleLabel":"owns","polymorphic":true,"constraintClasses":["Profiles.SinglePerimeterProfile"]},"target":{"multiplicity":"(0..*)","roleLabel":"is owned by","polymorphic":false,"constraintClasses":["Profiles.DerivedProfile"]}},"ICenterlineProfile":{"schemaItemType":"Mixin","label":"Centerline Profile","properties":[{"name":"Centerline","type":"PrimitiveProperty","description":"Non self intersecting centerline defining the geometry of the Profile.","category":"Profiles.ProfileProperties","typeName":"Bentley.Geometry.Common.IGeometry"},{"name":"WallThickness","type":"PrimitiveProperty","description":"Constant thickness that is applied evenly along the Centerline.","label":"Wall Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"appliesTo":"Profiles.Profile"},"CenterlineCShapeProfile":{"schemaItemType":"EntityClass","label":"Centerline C-Shape Profile","description":"A C shaped Profile with rounded corners, similar to cold-formed steel C-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the flange, defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the web, defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Girth","type":"PrimitiveProperty","description":"Length of lips. 0 if profile doesn't have lips, default 0 if not specified.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"CenterlineLShapeProfile":{"schemaItemType":"EntityClass","label":"Centerline L-Shape Profile","description":"An L-shaped Profile with rounded corners, similar to cold-formed steel L-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Horizontal leg length, defined parallel to the x axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Vertical leg length, defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Girth","type":"PrimitiveProperty","description":"Length of lips. 0 if profile doesn't have lips, default 0 if not specified.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"CenterlineZShapeProfile":{"schemaItemType":"EntityClass","label":"Centerline Z-Shape Profile","description":"A Z-shaped Profile with rounded corners, similar to cold-formed steel Z-shapes","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of single flange, defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Girth","type":"PrimitiveProperty","description":"Length of lips. 0 if profile doesn't have lips, default 0 if not specified.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"BentPlateProfile":{"schemaItemType":"EntityClass","label":"Bent Plate Profile","description":"Profile of a plate that has been bent at a given point with a given angle.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the plate length, defined parallel to the x axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BendAngle","type":"PrimitiveProperty","description":"Inner angle of the bend point. Value is valid in range (0..180) degrees. Values near 180 degrees meaning an almost unbent plate and values near 0 are almost fully bent in half plate.","label":"Bend Angle","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"BendOffset","type":"PrimitiveProperty","description":"Offset from the left edge of the plate defining at what point the plate is bent.","label":"Bend Offset","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius of the bend point.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"CompositeProfile":{"schemaItemType":"EntityClass","label":"Composite Profile","description":"A Profile comprised of multiple SinglePerimeterProfiles.","modifier":"Abstract","baseClass":"Profiles.Profile"},"ArbitraryCompositeProfile":{"schemaItemType":"EntityClass","label":"Arbitrary Composite Profile","description":"A Profile comprised of multiple SinglePerimeterProfiles.","modifier":"Sealed","baseClass":"Profiles.CompositeProfile"},"ArbitraryCompositeProfileComponentAspect":{"schemaItemType":"EntityClass","label":"Arbitrary Composite Profile Component","description":"Aspect used by ArbitraryCompositeProfile to reference SinglePerimeterProfile and store geometry transformations for it.","modifier":"Sealed","baseClass":"BisCore.ElementMultiAspect","properties":[{"name":"Profile","type":"NavigationProperty","description":"Single Profile referenced by ArbitraryCompositeProfile.","label":"Single Profile","category":"Profiles.ProfileProperties","relationshipName":"Profiles.ArbitraryCompositeProfileComponentAspectRefersToSinglePerimeterProfile","direction":"Forward"},{"name":"Offset","type":"PrimitiveProperty","description":"2D vector specifying how the profiles geometry will be offset from it's original coordinates.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"point2d"},{"name":"Rotation","type":"PrimitiveProperty","description":"Angle by which the profiles geometry will be rotated.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"MirrorAboutYAxis","type":"PrimitiveProperty","description":"Flag indicating whether the profiles geometry should be mirrored around the Y axis.","label":"Mirror About Y-Axis","category":"Profiles.ProfileProperties","typeName":"boolean"},{"name":"MemberPriority","type":"PrimitiveProperty","description":"Index used to strictly order components. This property is a duplicate from bis:ElementGroupsMembers.","label":"Member Priority","category":"Profiles.ProfileProperties","typeName":"int"}]},"ArbitraryCompositeProfileComponentAspectRefersToSinglePerimeterProfile":{"schemaItemType":"RelationshipClass","modifier":"Sealed","strength":"Referencing","strengthDirection":"Forward","source":{"multiplicity":"(0..*)","roleLabel":"refers to profile","polymorphic":false,"constraintClasses":["Profiles.ArbitraryCompositeProfileComponentAspect"]},"target":{"multiplicity":"(1..1)","roleLabel":"is referenced by","polymorphic":true,"constraintClasses":["Profiles.SinglePerimeterProfile"]}},"ArbitraryCompositeProfileOwnsArbitraryCompositeProfileComponentAspect":{"schemaItemType":"RelationshipClass","modifier":"Sealed","baseClass":"BisCore.ElementOwnsMultiAspects","strength":"Embedding","strengthDirection":"Forward","source":{"multiplicity":"(1..1)","roleLabel":"owns","polymorphic":false,"constraintClasses":["Profiles.ArbitraryCompositeProfile"]},"target":{"multiplicity":"(1..*)","roleLabel":"is owned by","polymorphic":false,"constraintClasses":["Profiles.ArbitraryCompositeProfileComponentAspect"]}},"DoubleLShapeProfileType":{"schemaItemType":"Enumeration","label":"Double L-Shape Profile Type","type":"int","isStrict":true,"enumerators":[{"name":"LLBB","value":0,"label":"LLBB"},{"name":"SLBB","value":1,"label":"SLBB"}]},"DoubleLShapeProfile":{"schemaItemType":"EntityClass","label":"Double L-Shape Profile","description":"A CompositeProfile comprised of back-to-back Ls with the horizontal legs at the top of the Profile.","modifier":"Sealed","baseClass":"Profiles.CompositeProfile","properties":[{"name":"Spacing","type":"PrimitiveProperty","description":"Distance separating the individual back to back LShapeProfiles.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Type","type":"PrimitiveProperty","description":"Enumeration defining which legs are to be placed back to back.","category":"Profiles.ProfileProperties","typeName":"Profiles.DoubleLShapeProfileType"}]},"LShapeProfileOwnsDoubleLShapeProfile":{"schemaItemType":"RelationshipClass","modifier":"Sealed","baseClass":"BisCore.ElementOwnsChildElements","strength":"Embedding","strengthDirection":"Forward","source":{"multiplicity":"(1..1)","roleLabel":"owns","polymorphic":false,"constraintClasses":["Profiles.LShapeProfile"]},"target":{"multiplicity":"(0..*)","roleLabel":"is owned by","polymorphic":false,"constraintClasses":["Profiles.DoubleLShapeProfile"]}},"DoubleCShapeProfile":{"schemaItemType":"EntityClass","label":"Double C-Shape Profile","description":"A CompositeProfile comprised of back-to-back Cs.","modifier":"Sealed","baseClass":"Profiles.CompositeProfile","properties":[{"name":"Spacing","type":"PrimitiveProperty","description":"Distance separating the individual back to back CShapeProfiles.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"CShapeProfileOwnsDoubleCShapeProfile":{"schemaItemType":"RelationshipClass","modifier":"Sealed","baseClass":"BisCore.ElementOwnsChildElements","strength":"Embedding","strengthDirection":"Forward","source":{"multiplicity":"(1..1)","roleLabel":"owns","polymorphic":false,"constraintClasses":["Profiles.CShapeProfile"]},"target":{"multiplicity":"(0..*)","roleLabel":"is owned by","polymorphic":false,"constraintClasses":["Profiles.DoubleCShapeProfile"]}},"ArbitraryShapeProfile":{"schemaItemType":"EntityClass","label":"Arbitrary Shape Profile","description":"Custom, user defined Profile that can have any shape.","baseClass":"Profiles.SinglePerimeterProfile"},"ArbitraryCenterlineProfile":{"schemaItemType":"EntityClass","label":"Arbitrary Centerline Profile","description":"Profile whose geometry is defined by user provided centerline and thickness that is uniformly applied to that centerline.","modifier":"Sealed","baseClass":"Profiles.ArbitraryShapeProfile","properties":[{"name":"ArcAngle","type":"PrimitiveProperty","description":"Minimum angle for creating an arc. If angle is greater than ArcAngle then arc will be created, otherwise ChamferAngle will be used.","label":"Arc Angle","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"ChamferAngle","type":"PrimitiveProperty","description":"Angle for constructing arcs from tangent lines. If angle is greater than ChamferAngle then curve will be constructed using multiple tangent lines, otherwise lines will be extended until they meet.","label":"Chamfer Angle","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"EllipseProfile":{"schemaItemType":"EntityClass","label":"Ellipse Profile","description":"Solid ellipse shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"XRadius","type":"PrimitiveProperty","description":"The first radius of the ellipse. It is measured along the direction of x axis of the position coordinate system.","label":"X-Axis Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"YRadius","type":"PrimitiveProperty","description":"The second radius of the ellipse. It is measured along the direction of y axis of the position coordinate system.","label":"Y-Axis Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"CircleProfile":{"schemaItemType":"EntityClass","label":"Circle Profile","description":"Solid circle shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Radius","type":"PrimitiveProperty","description":"The radius of the circle.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"HollowCircleProfile":{"schemaItemType":"EntityClass","label":"Hollow Circle Profile","description":"Hollow circle shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Radius","type":"PrimitiveProperty","description":"The radius of the circle.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WallThickness","type":"PrimitiveProperty","description":"Constant thickness of profile walls.","label":"Wall Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"RectangleProfile":{"schemaItemType":"EntityClass","label":"Rectangle Profile","description":"Solid rectangle shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the x-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"RoundedRectangleProfile":{"schemaItemType":"EntityClass","label":"Rounded Rectangle Profile","description":"Solid rectangle shape Profile with rounded corners.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the x-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"RoundingRadius","type":"PrimitiveProperty","description":"Radius of the circular arcs by which all four corners of the rectangle are equally rounded.","label":"Rounding Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"HollowRectangleProfile":{"schemaItemType":"EntityClass","label":"Hollow Rectangle Profile","description":"Hollow rectangle shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the x-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WallThickness","type":"PrimitiveProperty","description":"Constant thickness of profile walls.","label":"Wall Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"InnerFilletRadius","type":"PrimitiveProperty","description":"Radius of the circular arcs, by which all four corners of the inner contour of rectangle are equally rounded. Default 0 (= no rounding arcs) if not specified.","label":"Inner Filler Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"OuterFilletRadius","type":"PrimitiveProperty","description":"Radius of the circular arcs, by which all four corners of the outer contour of rectangle are equally rounded. Default 0 (= no rounding arcs) if not specified.","label":"Outer Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"TrapezoidProfile":{"schemaItemType":"EntityClass","label":"Trapezoid Profile","description":"Trapezoid shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"TopWidth","type":"PrimitiveProperty","description":"Extent of the top line measured along the implicit x-axis.","label":"Top Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomWidth","type":"PrimitiveProperty","description":"Extent of the bottom line measured along the implicit x-axis.","label":"Bottom Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the distance between the parallel bottom and top lines measured along the implicit y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopOffset","type":"PrimitiveProperty","description":"Offset from the beginning of the top line to the bottom line, measured along the implicit x-axis.","label":"Top Offset","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"RegularPolygonProfile":{"schemaItemType":"EntityClass","label":"Regular Polygon Profile","description":"Polygon shape Profile, where all angles and sides of the polygon are equal.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"SideCount","type":"PrimitiveProperty","description":"Count of sides (edges) the polygon is made of. Value cannot be less than 3 or greater than 32.","label":"Side Count","category":"Profiles.ProfileProperties","typeName":"int"},{"name":"SideLength","type":"PrimitiveProperty","description":"Constant length of each polygon side (edge).","label":"Side Length","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"CapsuleProfile":{"schemaItemType":"EntityClass","label":"Capsule Profile","description":"Capsule shape Profile - cylinder with hemispherical ends. Also referred as stadium shape.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the capsule in the direction of the x-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the capsule in the direction of the y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"ParametricDeckProfile":{"schemaItemType":"EntityClass","label":"Parametric Deck Profile","description":"An open Profile of constant thickness","modifier":"Abstract","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Thickness","type":"PrimitiveProperty","description":"Profile Thickness.","label":"Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"CelluralPlateThickness","type":"PrimitiveProperty","description":"Additional plate under the rest of the profile (optional).","label":"Cellural Plate Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"StandardDeckProfile":{"schemaItemType":"EntityClass","label":"Standard Deck Profile","description":"Standard Deck Shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricDeckProfile","properties":[{"name":"Depth","type":"PrimitiveProperty","description":"Depth.","label":"Depth","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlatWidth","type":"PrimitiveProperty","description":"Width of top flat.","label":"Top Flat Width","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomRibWidth","type":"PrimitiveProperty","description":"Width of bottom rib.","label":"Bottom Rib Width","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"CoverageWidth","type":"PrimitiveProperty","description":"Distance between top flat and bottom width.","label":"Coverage Width","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"DiagonalWidth","type":"PrimitiveProperty","description":"Horizontal width of (a single) web diagonal.","label":"Diagonal Width","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"DeepDeckProfile":{"schemaItemType":"EntityClass","label":"Deep Deck Profile","description":"Deep Deck Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricDeckProfile","properties":[{"name":"Depth","type":"PrimitiveProperty","description":"Depth.","label":"Depth","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"CorrugatedDeckProfile":{"schemaItemType":"EntityClass","label":"Corrugated Deck Profile","description":"Corrugated Deck Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricDeckProfile","properties":[{"name":"Depth","type":"PrimitiveProperty","description":"Depth.","label":"Depth","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"SineWaveDeckProfile":{"schemaItemType":"EntityClass","label":"Sine Wave Deck Profile","description":"Sine Wave Deck Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricDeckProfile","properties":[{"name":"Depth","type":"PrimitiveProperty","description":"Depth.","label":"Depth","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WaveLength","type":"PrimitiveProperty","description":"Wave Length.","label":"Wave Length","typeName":"double"}]}}}
+{"$schema":"https://dev.bentley.com/json_schemas/ec/32/ecschema","name":"Profiles","version":"01.00.03","alias":"prf","label":"Profiles","description":"EC Schema for Profiles","references":[{"name":"CoreCustomAttributes","version":"01.00.05"},{"name":"BisCustomAttributes","version":"01.00.00"},{"name":"BisCore","version":"01.00.26"},{"name":"AecUnits","version":"01.00.04"}],"customAttributes":[{"className":"CoreCustomAttributes.ProductionStatus","SupportedUse":"NotForProduction"},{"className":"BisCustomAttributes.SchemaLayerInfo","Value":"Common"}],"items":{"ProfileProperties":{"schemaItemType":"PropertyCategory","label":"Profile Properties","description":"Properties of a Structural Profile.","priority":1},"CardinalPoint":{"schemaItemType":"StructClass","label":"Cardinal Point","description":"2D location on the profile used to place and offset profiles when extruding them on curve members.","properties":[{"name":"Name","type":"PrimitiveProperty","description":"Name of the cardinal point, used to reference and distinguish cardinal points. Unique in the scope of a profile.","category":"Profiles.ProfileProperties","typeName":"string"},{"name":"Location","type":"PrimitiveProperty","description":"2D offset from the start of profiles coordinate system (0, 0) defining the location for the cardinal point.","category":"Profiles.ProfileProperties","typeName":"point2d"}]},"Profile":{"schemaItemType":"EntityClass","description":"A resource defining one or more 2D areas that may have voids.","modifier":"Abstract","baseClass":"BisCore.DefinitionElement","properties":[{"name":"Name","type":"PrimitiveProperty","description":"Name of the profile. This property is also used as designation when referencing a profile from standard catalog.","category":"Profiles.ProfileProperties","typeName":"string"},{"name":"Shape","type":"PrimitiveProperty","description":"2D geometry of the profile.","category":"Profiles.ProfileProperties","typeName":"Bentley.Geometry.Common.IGeometry"},{"name":"CardinalPoints","type":"StructArrayProperty","description":"Array of published and custom (user defined) cardinal points of the profile.","label":"Cardinal Points","typeName":"Profiles.CardinalPoint","minOccurs":0,"maxOccurs":2147483647}]},"StandardsOrganization":{"schemaItemType":"EntityClass","label":"Standards Organization","description":"Defines rules for Standard Profiles.","modifier":"Sealed","baseClass":"BisCore.DefinitionContainer"},"Manufacturer":{"schemaItemType":"EntityClass","label":"Manufacturer","description":"Produces structural members defined by Standard Profiles.","modifier":"Sealed","baseClass":"BisCore.DefinitionContainer"},"Revision":{"schemaItemType":"EntityClass","label":"Revision","description":"Revision for a set of Profiles produced by a specific Manufacturer.","modifier":"Sealed","baseClass":"BisCore.DefinitionContainer"},"SinglePerimeterProfile":{"schemaItemType":"EntityClass","label":"Single Perimeter Profile","description":"A Profile with a single outer perimeter.","modifier":"Abstract","baseClass":"Profiles.Profile","mixins":["BisCore.IParentElement"]},"ParametricProfile":{"schemaItemType":"EntityClass","label":"Parametric Profile","description":"A SinglePerimeterProfile that is guaranteed to have the center of the bounding box at (0, 0).","modifier":"Abstract","baseClass":"Profiles.SinglePerimeterProfile"},"CShapeProfile":{"schemaItemType":"EntityClass","label":"C-Shape Profile","description":"A C shaped Profile similar to rolled steel C-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the flange, defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the web, defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Constant wall thickness of flanges.","label":"Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the web.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of the lower edges of the top flange and the upper edges of the bottom flange. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower face of the top flange and of the upper face of the bottom flange. Non-zero in case of tapered flanges, 0 in case of parallel flanges, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}],"mixins":["BisCore.IParentElement"]},"IShapeProfile":{"schemaItemType":"EntityClass","label":"I-Shape Profile","description":"An I shaped Profile similar to rolled steel I-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the width (flange length), defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Flange thickness of the I-shape. Both, the upper and the lower flanges have the same thickness and they are centred on the y-axis of the position coordinate system.","label":"Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Web thickness of the I-shape. The web is centred on the x-axis and the y-axis of the position coordinate system.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of the lower edges of the top flange and the upper edges of the bottom flange. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower faces of the top flange and of the upper faces of the bottom flange. Non-zero in case of tapered flanges, 0 in case of parallel flanges, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}]},"AsymmetricIShapeProfile":{"schemaItemType":"EntityClass","description":"An asymmetric (about x-axis) I shaped Profile similar to rolled steel I-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"TopFlangeWidth","type":"PrimitiveProperty","description":"Extent of the top flange, defined parallel to the x axis of the position coordinate system.","label":"Top Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeWidth","type":"PrimitiveProperty","description":"Extent of the bottom flange, defined parallel to the x axis of the position coordinate system.","label":"Bottom Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlangeThickness","type":"PrimitiveProperty","description":"Flange thickness of the top flange.","label":"Top Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeThickness","type":"PrimitiveProperty","description":"Flange thickness of the bottom flange.","label":"Bottom Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Web thickness of the I-shape. The web is centred on the x-axis and the y-axis of the position coordinate system.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlangeFilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the top flange. 0 if sharp-edged, default 0 if not specified.","label":"Top Flange Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of the lower edges of the top flange. 0 if sharp-edged, default 0 if not specified.","label":"Top Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower faces of the top flange. Non-zero in case of of tapered top flange, 0 in case of parallel top flange, default 0 if not specified.","label":"Top Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"BottomFlangeFilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the bottom flange. 0 if sharp-edged, default 0 if not specified.","label":"Bottom Flange Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of the upper edges of the bottom flange. 0 if sharp-edged, default 0 if not specified.","label":"Bottom Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomFlangeSlope","type":"PrimitiveProperty","description":"Slope of the upper faces of the bottom flange. Non-zero in case of of tapered bottom flange, 0 in case of parallel bottom flange, default 0 if not specified.","label":"Bottom Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}]},"TShapeProfile":{"schemaItemType":"EntityClass","label":"T-Shape Profile","description":"A T-shaped Profile similar to rolled steel T-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the width (top flange), defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the flange.","label":"Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the web.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower face of the flange. Non-zero in case of tapered flange, 0 in case of non-tapered flange, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"WebEdgeRadius","type":"PrimitiveProperty","description":"Radius of web edges. 0 if sharp-edged, default 0 if not specified.","label":"Web Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebSlope","type":"PrimitiveProperty","description":"Slope of the web. Non-zero in case of tapered web, 0 in case of non-tapered web, default 0 if not specified.","label":"Web Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}]},"LShapeProfile":{"schemaItemType":"EntityClass","label":"L-Shape Profile","description":"An L-shaped Profile (also referred as Angle) similar to rolled steel L-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Horizontal leg length, defined parallel to the x axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Vertical leg length, defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Thickness","type":"PrimitiveProperty","description":"Constant wall thickness of profile.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Fillet radius between legs. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"EdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"LegSlope","type":"PrimitiveProperty","description":"Slope of the inner faces of the legs. Non-zero in case of tapered legs, 0 in case of perpendicular legs, default 0 if not specified.","label":"Leg Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}],"mixins":["BisCore.IParentElement"]},"TTShapeProfile":{"schemaItemType":"EntityClass","label":"TT-Shape Profile","description":"A TT-shaped Profile similar to double-tee concrete shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the width (top flange), defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the flange.","label":"Flange Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the web.","label":"Web Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebSpacing","type":"PrimitiveProperty","description":"Spacing between the two webs.","label":"Web Spacing","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flange. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower face of the flange. Non-zero in case of tapered flange, 0 in case of non-tapered flange, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"WebEdgeRadius","type":"PrimitiveProperty","description":"Radius of web edges. 0 if sharp-edged, default 0 if not specified.","label":"Web Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebSlope","type":"PrimitiveProperty","description":"Slope of the web. Non-zero in case of tapered web, 0 in case of non-tapered web, default 0 if not specified.","label":"Web Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}]},"SchifflerizedLShapeProfile":{"schemaItemType":"EntityClass","label":"Schifflerized L-Shape Profile","description":"An L-shaped Profile (also referred as Angle) with legs bent at 15 degree angle, making the angle between the legs equal to 60 degrees.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"LegLength","type":"PrimitiveProperty","description":"Leg length. Both vertical and horizontal legs are defined with equal length.","label":"Leg Length","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Thickness","type":"PrimitiveProperty","description":"Constant wall thickness of profile.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"LegBendOffset","type":"PrimitiveProperty","description":"Offset defining where legs are bent. Offset is measured from start of the angle (leg joint) to the outer bending point of the leg. LegBendOffset default value is equal to Thickness plus required offset from the leg joint.","label":"Leg Bend Offset","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Fillet radius between legs. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"EdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"ZShapeProfile":{"schemaItemType":"EntityClass","label":"Z-Shape Profile","description":"A Z-shaped Profile similar to rolled steel Z-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of single flange, defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeThickness","type":"PrimitiveProperty","description":"Constant wall thickness of flanges.","label":"FlangeThickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WebThickness","type":"PrimitiveProperty","description":"Constant wall thickness of the web.","label":"WebThickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"The fillet radius between the web and the flanges. 0 if sharp-edged, default 0 if not specified.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeEdgeRadius","type":"PrimitiveProperty","description":"Radius of flange edges. 0 if sharp-edged, default 0 if not specified.","label":"Flange Edge Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FlangeSlope","type":"PrimitiveProperty","description":"Slope of the lower face of the top flange and of the upper face of the bottom flange. Non-zero in case of tapered flanges, 0 in case of parallel flanges, default 0 if not specified.","label":"Flange Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}]},"DerivedProfile":{"schemaItemType":"EntityClass","label":"Derived Profile","description":"This class represents a SinglePerimeterProfile that has been converted into a different shape via a matrix transform. Usage outside of IFC compatibility is not recommended","modifier":"Sealed","baseClass":"Profiles.SinglePerimeterProfile","properties":[{"name":"Offset","type":"PrimitiveProperty","description":"2D vector specifying how the profiles geometry will be offset from it's original coordinates.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"point2d"},{"name":"Scale","type":"PrimitiveProperty","description":"A non-uniform scale factor.","category":"Profiles.ProfileProperties","typeName":"point2d"},{"name":"Rotation","type":"PrimitiveProperty","description":"Angle by which the profiles geometry will be rotated.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"MirrorAboutYAxis","type":"PrimitiveProperty","description":"Flag indicating whether the profiles geometry should be mirrored around the Y axis.","label":"Mirror About Y-Axis","category":"Profiles.ProfileProperties","typeName":"boolean"}]},"SinglePerimeterProfileOwnsDerivedProfile":{"schemaItemType":"RelationshipClass","modifier":"Sealed","baseClass":"BisCore.ElementOwnsChildElements","strength":"Embedding","strengthDirection":"Forward","source":{"multiplicity":"(1..1)","roleLabel":"owns","polymorphic":true,"constraintClasses":["Profiles.SinglePerimeterProfile"]},"target":{"multiplicity":"(0..*)","roleLabel":"is owned by","polymorphic":false,"constraintClasses":["Profiles.DerivedProfile"]}},"ICenterlineProfile":{"schemaItemType":"Mixin","label":"Centerline Profile","properties":[{"name":"Centerline","type":"PrimitiveProperty","description":"Non self intersecting centerline defining the geometry of the Profile.","category":"Profiles.ProfileProperties","typeName":"Bentley.Geometry.Common.IGeometry"},{"name":"WallThickness","type":"PrimitiveProperty","description":"Constant thickness that is applied evenly along the Centerline.","label":"Wall Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"appliesTo":"Profiles.Profile"},"CenterlineCShapeProfile":{"schemaItemType":"EntityClass","label":"Centerline C-Shape Profile","description":"A C shaped Profile with rounded corners, similar to cold-formed steel C-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of the flange, defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the web, defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Girth","type":"PrimitiveProperty","description":"Length of lips. 0 if profile doesn't have lips, default 0 if not specified.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"CenterlineLShapeProfile":{"schemaItemType":"EntityClass","label":"Centerline L-Shape Profile","description":"An L-shaped Profile with rounded corners, similar to cold-formed steel L-shapes.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Horizontal leg length, defined parallel to the x axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Vertical leg length, defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Girth","type":"PrimitiveProperty","description":"Length of lips. 0 if profile doesn't have lips, default 0 if not specified.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"CenterlineZShapeProfile":{"schemaItemType":"EntityClass","label":"Centerline Z-Shape Profile","description":"A Z-shaped Profile with rounded corners, similar to cold-formed steel Z-shapes","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"FlangeWidth","type":"PrimitiveProperty","description":"Extent of single flange or top flange, if bottom flange width is non-zero. Defined parallel to the x axis of the position coordinate system.","label":"Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the depth (web length), defined parallel to the y axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Girth","type":"PrimitiveProperty","description":"Length of lips. 0 if profile doesn't have lips, default 0 if not specified.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"GirthSlope","type":"PrimitiveProperty","description":"Slope of lips. 0 if profile doesn't have lips, default 0 if not specified.","label":"Girth Slope","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"BottomFlangeWidth","type":"PrimitiveProperty","description":"Extent of bottom flange. Defined parallel to the x axis of the position coordinate system.","label":"Bottom Flange Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"BentPlateProfile":{"schemaItemType":"EntityClass","label":"Bent Plate Profile","description":"Profile of a plate that has been bent at a given point with a given angle.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the plate length, defined parallel to the x axis of the position coordinate system.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BendAngle","type":"PrimitiveProperty","description":"Inner angle of the bend point. Value is valid in range (0..180) degrees. Values near 180 degrees meaning an almost unbent plate and values near 0 are almost fully bent in half plate.","label":"Bend Angle","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"BendOffset","type":"PrimitiveProperty","description":"Offset from the left edge of the plate defining at what point the plate is bent.","label":"Bend Offset","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"FilletRadius","type":"PrimitiveProperty","description":"Inner fillet radius of the bend point.","label":"Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"CompositeProfile":{"schemaItemType":"EntityClass","label":"Composite Profile","description":"A Profile comprised of multiple SinglePerimeterProfiles.","modifier":"Abstract","baseClass":"Profiles.Profile"},"ArbitraryCompositeProfile":{"schemaItemType":"EntityClass","label":"Arbitrary Composite Profile","description":"A Profile comprised of multiple SinglePerimeterProfiles.","modifier":"Sealed","baseClass":"Profiles.CompositeProfile"},"ArbitraryCompositeProfileComponentAspect":{"schemaItemType":"EntityClass","label":"Arbitrary Composite Profile Component","description":"Aspect used by ArbitraryCompositeProfile to reference SinglePerimeterProfile and store geometry transformations for it.","modifier":"Sealed","baseClass":"BisCore.ElementMultiAspect","properties":[{"name":"Profile","type":"NavigationProperty","description":"Single Profile referenced by ArbitraryCompositeProfile.","label":"Single Profile","category":"Profiles.ProfileProperties","relationshipName":"Profiles.ArbitraryCompositeProfileComponentAspectRefersToSinglePerimeterProfile","direction":"Forward"},{"name":"Offset","type":"PrimitiveProperty","description":"2D vector specifying how the profiles geometry will be offset from it's original coordinates.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"point2d"},{"name":"Rotation","type":"PrimitiveProperty","description":"Angle by which the profiles geometry will be rotated.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"MirrorAboutYAxis","type":"PrimitiveProperty","description":"Flag indicating whether the profiles geometry should be mirrored around the Y axis.","label":"Mirror About Y-Axis","category":"Profiles.ProfileProperties","typeName":"boolean"},{"name":"MemberPriority","type":"PrimitiveProperty","description":"Index used to strictly order components. This property is a duplicate from bis:ElementGroupsMembers.","label":"Member Priority","category":"Profiles.ProfileProperties","typeName":"int"}]},"ArbitraryCompositeProfileComponentAspectRefersToSinglePerimeterProfile":{"schemaItemType":"RelationshipClass","modifier":"Sealed","strength":"Referencing","strengthDirection":"Forward","source":{"multiplicity":"(0..*)","roleLabel":"refers to profile","polymorphic":false,"constraintClasses":["Profiles.ArbitraryCompositeProfileComponentAspect"]},"target":{"multiplicity":"(1..1)","roleLabel":"is referenced by","polymorphic":true,"constraintClasses":["Profiles.SinglePerimeterProfile"]}},"ArbitraryCompositeProfileOwnsArbitraryCompositeProfileComponentAspect":{"schemaItemType":"RelationshipClass","modifier":"Sealed","baseClass":"BisCore.ElementOwnsMultiAspects","strength":"Embedding","strengthDirection":"Forward","source":{"multiplicity":"(1..1)","roleLabel":"owns","polymorphic":false,"constraintClasses":["Profiles.ArbitraryCompositeProfile"]},"target":{"multiplicity":"(1..*)","roleLabel":"is owned by","polymorphic":false,"constraintClasses":["Profiles.ArbitraryCompositeProfileComponentAspect"]}},"DoubleLShapeProfileType":{"schemaItemType":"Enumeration","label":"Double L-Shape Profile Type","type":"int","isStrict":true,"enumerators":[{"name":"LLBB","value":0,"label":"LLBB"},{"name":"SLBB","value":1,"label":"SLBB"}]},"DoubleLShapeProfile":{"schemaItemType":"EntityClass","label":"Double L-Shape Profile","description":"A CompositeProfile comprised of back-to-back Ls with the horizontal legs at the top of the Profile.","modifier":"Sealed","baseClass":"Profiles.CompositeProfile","properties":[{"name":"Spacing","type":"PrimitiveProperty","description":"Distance separating the individual back to back LShapeProfiles.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Type","type":"PrimitiveProperty","description":"Enumeration defining which legs are to be placed back to back.","category":"Profiles.ProfileProperties","typeName":"Profiles.DoubleLShapeProfileType"}]},"LShapeProfileOwnsDoubleLShapeProfile":{"schemaItemType":"RelationshipClass","modifier":"Sealed","baseClass":"BisCore.ElementOwnsChildElements","strength":"Embedding","strengthDirection":"Forward","source":{"multiplicity":"(1..1)","roleLabel":"owns","polymorphic":false,"constraintClasses":["Profiles.LShapeProfile"]},"target":{"multiplicity":"(0..*)","roleLabel":"is owned by","polymorphic":false,"constraintClasses":["Profiles.DoubleLShapeProfile"]}},"DoubleCShapeProfile":{"schemaItemType":"EntityClass","label":"Double C-Shape Profile","description":"A CompositeProfile comprised of back-to-back Cs.","modifier":"Sealed","baseClass":"Profiles.CompositeProfile","properties":[{"name":"Spacing","type":"PrimitiveProperty","description":"Distance separating the individual back to back CShapeProfiles.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"CShapeProfileOwnsDoubleCShapeProfile":{"schemaItemType":"RelationshipClass","modifier":"Sealed","baseClass":"BisCore.ElementOwnsChildElements","strength":"Embedding","strengthDirection":"Forward","source":{"multiplicity":"(1..1)","roleLabel":"owns","polymorphic":false,"constraintClasses":["Profiles.CShapeProfile"]},"target":{"multiplicity":"(0..*)","roleLabel":"is owned by","polymorphic":false,"constraintClasses":["Profiles.DoubleCShapeProfile"]}},"ArbitraryShapeProfile":{"schemaItemType":"EntityClass","label":"Arbitrary Shape Profile","description":"Custom, user defined Profile that can have any shape.","baseClass":"Profiles.SinglePerimeterProfile"},"ArbitraryCenterlineProfile":{"schemaItemType":"EntityClass","label":"Arbitrary Centerline Profile","description":"Profile whose geometry is defined by user provided centerline and thickness that is uniformly applied to that centerline.","modifier":"Sealed","baseClass":"Profiles.ArbitraryShapeProfile","properties":[{"name":"ArcAngle","type":"PrimitiveProperty","description":"Minimum angle for creating an arc. If angle is greater than ArcAngle then arc will be created, otherwise ChamferAngle will be used.","label":"Arc Angle","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"},{"name":"ChamferAngle","type":"PrimitiveProperty","description":"Angle for constructing arcs from tangent lines. If angle is greater than ChamferAngle then curve will be constructed using multiple tangent lines, otherwise lines will be extended until they meet.","label":"Chamfer Angle","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.ANGLE","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"EllipseProfile":{"schemaItemType":"EntityClass","label":"Ellipse Profile","description":"Solid ellipse shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"XRadius","type":"PrimitiveProperty","description":"The first radius of the ellipse. It is measured along the direction of x axis of the position coordinate system.","label":"X-Axis Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"YRadius","type":"PrimitiveProperty","description":"The second radius of the ellipse. It is measured along the direction of y axis of the position coordinate system.","label":"Y-Axis Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"CircleProfile":{"schemaItemType":"EntityClass","label":"Circle Profile","description":"Solid circle shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Radius","type":"PrimitiveProperty","description":"The radius of the circle.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"HollowCircleProfile":{"schemaItemType":"EntityClass","label":"Hollow Circle Profile","description":"Hollow circle shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Radius","type":"PrimitiveProperty","description":"The radius of the circle.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WallThickness","type":"PrimitiveProperty","description":"Constant thickness of profile walls.","label":"Wall Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"RectangleProfile":{"schemaItemType":"EntityClass","label":"Rectangle Profile","description":"Solid rectangle shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the x-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"RoundedRectangleProfile":{"schemaItemType":"EntityClass","label":"Rounded Rectangle Profile","description":"Solid rectangle shape Profile with rounded corners.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the x-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"RoundingRadius","type":"PrimitiveProperty","description":"Radius of the circular arcs by which all four corners of the rectangle are equally rounded.","label":"Rounding Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"HollowRectangleProfile":{"schemaItemType":"EntityClass","label":"Hollow Rectangle Profile","description":"Hollow rectangle shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the x-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the rectangle in the direction of the y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WallThickness","type":"PrimitiveProperty","description":"Constant thickness of profile walls.","label":"Wall Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"InnerFilletRadius","type":"PrimitiveProperty","description":"Radius of the circular arcs, by which all four corners of the inner contour of rectangle are equally rounded. Default 0 (= no rounding arcs) if not specified.","label":"Inner Filler Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"OuterFilletRadius","type":"PrimitiveProperty","description":"Radius of the circular arcs, by which all four corners of the outer contour of rectangle are equally rounded. Default 0 (= no rounding arcs) if not specified.","label":"Outer Fillet Radius","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}],"mixins":["Profiles.ICenterlineProfile"]},"TrapezoidProfile":{"schemaItemType":"EntityClass","label":"Trapezoid Profile","description":"Trapezoid shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"TopWidth","type":"PrimitiveProperty","description":"Extent of the top line measured along the implicit x-axis.","label":"Top Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomWidth","type":"PrimitiveProperty","description":"Extent of the bottom line measured along the implicit x-axis.","label":"Bottom Width","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the distance between the parallel bottom and top lines measured along the implicit y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopOffset","type":"PrimitiveProperty","description":"Offset from the beginning of the top line to the bottom line, measured along the implicit x-axis.","label":"Top Offset","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"RegularPolygonProfile":{"schemaItemType":"EntityClass","label":"Regular Polygon Profile","description":"Polygon shape Profile, where all angles and sides of the polygon are equal.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"SideCount","type":"PrimitiveProperty","description":"Count of sides (edges) the polygon is made of. Value cannot be less than 3 or greater than 32.","label":"Side Count","category":"Profiles.ProfileProperties","typeName":"int"},{"name":"SideLength","type":"PrimitiveProperty","description":"Constant length of each polygon side (edge).","label":"Side Length","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"CapsuleProfile":{"schemaItemType":"EntityClass","label":"Capsule Profile","description":"Capsule shape Profile - cylinder with hemispherical ends. Also referred as stadium shape.","modifier":"Sealed","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Width","type":"PrimitiveProperty","description":"Extent of the capsule in the direction of the x-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"Depth","type":"PrimitiveProperty","description":"Extent of the capsule in the direction of the y-axis.","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"ParametricDeckProfile":{"schemaItemType":"EntityClass","label":"Parametric Deck Profile","description":"An open Profile of constant thickness","modifier":"Abstract","baseClass":"Profiles.ParametricProfile","properties":[{"name":"Thickness","type":"PrimitiveProperty","description":"Profile Thickness.","label":"Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"CelluralPlateThickness","type":"PrimitiveProperty","description":"Additional plate under the rest of the profile (optional).","label":"Cellural Plate Thickness","category":"Profiles.ProfileProperties","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"StandardDeckProfile":{"schemaItemType":"EntityClass","label":"Standard Deck Profile","description":"Standard Deck Shape Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricDeckProfile","properties":[{"name":"Depth","type":"PrimitiveProperty","description":"Depth.","label":"Depth","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"TopFlatWidth","type":"PrimitiveProperty","description":"Width of top flat.","label":"Top Flat Width","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"BottomRibWidth","type":"PrimitiveProperty","description":"Width of bottom rib.","label":"Bottom Rib Width","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"CoverageWidth","type":"PrimitiveProperty","description":"Distance between top flat and bottom width.","label":"Coverage Width","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"DiagonalWidth","type":"PrimitiveProperty","description":"Horizontal width of (a single) web diagonal.","label":"Diagonal Width","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"DeepDeckProfile":{"schemaItemType":"EntityClass","label":"Deep Deck Profile","description":"Deep Deck Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricDeckProfile","properties":[{"name":"Depth","type":"PrimitiveProperty","description":"Depth.","label":"Depth","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"CorrugatedDeckProfile":{"schemaItemType":"EntityClass","label":"Corrugated Deck Profile","description":"Corrugated Deck Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricDeckProfile","properties":[{"name":"Depth","type":"PrimitiveProperty","description":"Depth.","label":"Depth","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"}]},"SineWaveDeckProfile":{"schemaItemType":"EntityClass","label":"Sine Wave Deck Profile","description":"Sine Wave Deck Profile.","modifier":"Sealed","baseClass":"Profiles.ParametricDeckProfile","properties":[{"name":"Depth","type":"PrimitiveProperty","description":"Depth.","label":"Depth","kindOfQuantity":"AecUnits.LENGTH_SHORT","typeName":"double"},{"name":"WaveLength","type":"PrimitiveProperty","description":"Wave Length.","label":"Wave Length","typeName":"double"}]}}}

package/Profiles.ecschema.xml

@@ -210,11 +210,13 @@
     <ECEntityClass typeName="CenterlineZShapeProfile" modifier="Sealed" displayLabel="Centerline Z-Shape Profile" description="A Z-shaped Profile with rounded corners, similar to cold-formed steel Z-shapes">
         <BaseClass>ParametricProfile</BaseClass>
         <BaseClass>ICenterlineProfile</BaseClass>
-        <ECProperty propertyName="FlangeWidth" typeName="double" displayLabel="Flange Width" description="Extent of single flange, defined parallel to the x axis of the position coordinate system." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
+        <ECProperty propertyName="FlangeWidth" typeName="double" displayLabel="Flange Width" description="Extent of single flange or top flange, if bottom flange width is non-zero. Defined parallel to the x axis of the position coordinate system." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="Depth" typeName="double" description="Extent of the depth (web length), defined parallel to the y axis of the position coordinate system." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <ECProperty propertyName="FilletRadius" typeName="double" displayLabel="Fillet Radius" description="Inner fillet radius." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
         <!-- Optional properties -->
         <ECProperty propertyName="Girth" typeName="double" description="Length of lips. 0 if profile doesn't have lips, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
+        <ECProperty propertyName="GirthSlope" typeName="double" displayLabel="Girth Slope" description="Slope of lips. 0 if profile doesn't have lips, default 0 if not specified." category="ProfileProperties" kindOfQuantity="AECU:ANGLE" />
+        <ECProperty propertyName="BottomFlangeWidth" typeName="double" displayLabel="Bottom Flange Width" description="Extent of bottom flange. Defined parallel to the x axis of the position coordinate system." category="ProfileProperties" kindOfQuantity="AECU:LENGTH_SHORT" />
     </ECEntityClass>
 
     <ECEntityClass typeName="BentPlateProfile" modifier="Sealed" displayLabel="Bent Plate Profile" description="Profile of a plate that has been bent at a given point with a given angle.">

package/Profiles.remarks.md

@@ -0,0 +1,688 @@
+---
+remarksTarget: Profiles.ecschema.md
+---
+
+# Profiles
+
+Profiles schema defines classes that represent two dimensional cross sections, used to define geometric shapes. Profiles may be used to extrude structural components like beams and columns.
+
+Most often used Profiles are standard and defined by a specific [Standards Organization](#standardsorganization). Standard Profiles are always shared. Standard profiles should only be deleted in case a mistake was made when creating standard Profile.
+
+<b>Standard Profiles</b>
+
+Most often used Profiles are standard and defined in a catalog. This is defined by a Profile and Code hierarchy representing four components:
+
+- `StandardsOrganization` - Name of the standards organization that defines the [Profile](#profile), e.g. "AISC"
+- `Manufacturer` - Name of the manufacturer for the [Profile](#profile). This is usually a country code e.g. "US"
+- `Revision` - Name of the edition or version of the standards organization, e.g. "14"
+- `Name` - Name of the [Profile](#profile) (also called designation) e.g. "W16x40"
+
+Applications will be able to use this information to query detailed properties and geometry of catalog (database) profile.
+
+Applications that don't have access to catalogs will still be able to render the Profiles as they contain their own geometry constructed from available properties - this geometry may not match the detailed geometry from a catalog.
+
+<b>Structural Components Hierarchy</b>
+
+The following instance-diagram presents a simple example of the Structural Components Hierarchy explained next.
+
+![Structural Components Hierarchy](./media/DeckClassificationSystems.png)
+
+<u>Profiles Definition Catalog</u>
+
+The top level Element to store Profiles definitions is defined as `DefinitionContainer`. This Element is expected to be stored in `DictionaryModel`. The Code value should be set to "prf:DomainDefinitions", scope is set to `Repository` Model id, spec set to "bis:DefinitionContainer". The Container is expected to store "Standard Organizations" and "Structural Components Catalog" `DefinitionContainers` which are defined in subsequent sections of this document.
+
+<u>Standard Organizations and Structural Components Catalog</u>
+
+Standard Organizations primary function is developing and maintaining manuals that specify technical standards for various structural components - Beam/Column Sections, Steel Decks, Joists, etc. Examples of standard organizations are - "AISC", "CEN", "VERCO". BIS repositories are not expected to contain Elements that represent Standard Organizations, only specific manuals are defined. 
+
+<u>Standard Organizations Definition Container</u>
+
+The top level Element of StandardOrganization structure is defined as a single sub-modeled instance of `DefinitionContainer`. This Element is expected to have a Code with value set to "Standard Organizations", scope set to `Model` Model id, spec set to "bis:DefinitionContainer". "Standard Organizations" Element is expected to be stored in the "prf:DomainDefinitions" sub-model.
+
+<u>Classification Systems</u>
+
+"Standard Organizations" `DefinitionContainer` is broken down to a model that stores Elements that represents manuals. Manuals are defined as `ClassificationSystem` Elements where each Element represents only a single revision/edition of a catalog released, maintained by Standard Organization. `Code` value of the Manual element is expected to be concatination of StandardOrganization name and the manual name itself, e.g. `ClassificationSystem` that represents Standard Organization "CEN"'s "EU 19-53" Profile catalog edition would have a Code with value "CEN EU 19-53". `CodeScope` is expected to be set to `DictionaryModel` id, `CodeSpec` to `clsf:ClassificationSystem`.
+
+<u>Classification Table</u>
+
+The Manuals are expected to have child Elements (`ClassificationTable`) that divide the manual into groups by use case. e.g. Same manual might define both Beam Profiles and Steel Decks. The CodeScope of each `ClassificationTable` should be set to `ParentElement`. CodeSpec to "bis:ClassificationTable". Code values depend on the `ClassificationTable`'s use case:
+
+- Structural Profile Classifaction Table should have CodeValue set to "Structural Profiles"
+- Steel Decks to "Structural Steel Decks"
+- Joists to "Structural Joists"
+
+Each `ClassificationTable` is then broken down by a model that stores separate `Classification`s that belong to that table.
+
+<u>Classifications</u>
+
+`Classification` Elements define the actual entries of any Standard Catalog, e.g. AISC 7th Edition Structural Profile Catalog entires would be defined as separate `Classification` containing all entries from that specific catalog edition.
+
+Each `Classification` CodeScope would be set to `Model`, each CodeSpec to `clsf:Classification`. The value would be set as Designation of that entry. (e.g. "W44X335"). `Classification` Elements would not define any properties that are defined by the actual real world catalog entries. Instead, such properties would be defined by separate Elements that reference classification using `ElementHasClassifications` relationship.
+
+<b>Structural Components Catalog Definition Container</b>
+
+The Structural Components Catalog Hierarchy defines actual structural components - Profiles, Steel Decks, Joists, etc. The top level Element of the hierarchy is a `DefinitionContainer` that is stored in the "prf:DomainDefinitions" sub-model. The Code assigned to it consists of "Structural Components Catalog" value, `Model` scope, "bis:DefinitionContainer" spec. This container is broken down into case specific `DefinitionContainer` Elements - Profiles, Joists, Steel Decks, etc. Each container has a CodeScope set to "Structural Components Catalog" id, CodeSpec set to `bis:DefinitionContainer`. CodeValue depends on the container's use case:
+
+- "Structural Profiles" code is used for Profiles
+- "Structural Steel Joists" for Joists
+- "Structural Steel Decks" for Steel Decks
+
+Each container is then broken down further. Where each sub-model contains the actual definitions of Structural Components - Profiles, SteelDecks, etc. These Elements are expected to refer to at least one Classification that the component fulfills. `ElementHasClassifications` relationship is used to relate Component with its classification.
+
+## Entity Classes
+
+### Profile
+
+Base class of all profile definitions.
+Profile may be a [SinglePerimeterProfile](#singleperimeterprofile) or [CompositeProfile](#compositeprofile).
+
+### StandardsOrganization
+
+Defines standard [Profiles](#profile). This should always be sub-modeled by a model which stores all manufacturers that produce the actual structural members defined by profile rules of standard organization.
+
+### Manufacturer
+
+Produces structural members defined by a standard [Profile]. Manufacturer is always stored in a model that models [standards organization](#standardsorganization) whichs' rules are used to define profiles. Manufacturer is always sub-modeled and it's model contains revisions for profiles.
+
+### Revision
+
+Stores standard [profiles](#profile) that are used to produce structural members by some specific [manufacturer](#manufacturer).
+
+### SinglePerimeterProfile
+
+This profile subclass is used to denote a [Profile](#profile) that is composed out of a single perimeter (area). SinglePerimeterProfiles can be referenced by [CompositeProfile](#compositeprofile) to form a [Profile](#profile) with multiple disjoint areas.
+
+### ParametricProfile
+
+[Profile](#profile) whose geometry is defined by a set of properties such as ``Width``, ``Depth``, ``Thickness`` etc.
+In addition, such Profiles have a bounding box which is centered at the center of the coordinate system i.e. (x: 0, y: 0).
+
+### CShapeProfile
+**Derivative properties:**
+- `FlangeInnerEdgeLength` = `FlangeWidth` - `WebThickness`
+- `FlangeSlopeHeight` = `FlangeInnerEdgeLength` * Tan(`FlangeSlope`)
+- `WebInnerEdgeLength` = `Depth` - `FlangeThickness` * 2
+
+**Constraints:**
+- `FlangeWidth` must be greater than zero
+- `Depth` must be greater than zero
+- `FlangeThickness`:
+  - must be greater than zero
+  - must be less than half `Depth`
+- `WebThickness`:
+  - must be greater than zero
+  - must be less than `FlangeWidth`
+- `FilletRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half of `FlangeInnerEdgeLength`
+  - must be less or equal to half of `WebInnerEdgeLength` minus `FlangeSlopeHeight`
+- `FlangeEdgeRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half of `FlangeInnerEdgeLength`
+  - must be less or equal to `FlangeThickness`
+- `FlangeSlope` (if set):
+  - must be greater or equal to zero
+  - must be less than ninety degrees
+  - `FlangeSlopeHeight` must be less or equal to `WebInnerEdgeLength`
+  - `FlangeSlopeHeight` must be less or equal to double `FlangeThickness`
+
+![CShape (only mandatory properties)](media/ProfilePictures/CShape1.png)
+![CShape (all properties)](media/ProfilePictures/CShape2.png)
+
+### AsymmetricIShapeProfile
+**Derivative properties:**
+- `WebEdgeLength` = `Depth` - `TopFlangeThickness` - `BottomFlangeThickness`
+- `TopFlangeInnerEdgeLength` = (`TopFlangeWidth` - `WebThickness`) / 2
+- `BottomFlangeInnerEdgeLength` = (`BottomFlangeWidth` - `WebThickness`) / 2
+- `TopFlangeSlopeHeight` = `TopFlangeInnerEdgeLength` * Tan(`TopFlangeSlope`)
+- `BottomFlangeSlopeHeight` = `BottomFlangeInnerEdgeLength` * Tan(`BottomFlangeSlope`)
+
+**Constraints:**
+- `TopFlangeWidth` must be greater than zero
+- `BottomFlangeWidth` must be greater than zero
+- `Depth` must be greater than zero
+- `TopFlangeThickness`
+  - must be greater than zero
+  - `TopFlangeThickness` plus `BottomFlangeThickness` must be less than `Depth`
+- `BottomFlangeThickness`
+  - must be greater than zero
+  - `TopFlangeThickness` plus `BottomFlangeThickness` must be less than `Depth`
+- `WebThickness`
+  - must be greater than zero
+  - must be less than `TopFlangeWidth`
+  - must be less than `BottomFlangeWidth`
+- `TopFlangeFilletRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half `WebEdgeLength` minus `TopFlangeSlopeHeight`
+  - must be less or equal to half `TopFlangeInnerEdgeLength`
+- `TopFlangeEdgeRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to `TopFlangeThickness`
+  - must be less or equal to half `TopFlangeInnerEdgeLength`
+- `TopFlangeSlope` (if set):
+  - must be greater or equal to zero
+  - must be less than ninety degrees
+  - `TopFlangeSlopeHeight` must be less or equal to `WebEdgeLength`
+  - `TopFlangeSlopeHeight` must be less or equal to double `TopFlangeThickness`
+- `BottomFlangeFilletRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half `WebEdgeLength` minus `BottomFlangeSlopeHeight`
+  - must be less or equal to half `BottomFlangeInnerEdgeLength`
+- `BottomFlangeEdgeRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to `BottomFlangeThickness`
+  - must be less or equal to half `BottomFlangeInnerEdgeLength`
+- `BottomFlangeSlope` (if set):
+  - must be greater or equal to zero
+  - must be less than ninety degrees
+  - `BottomFlangeSlopeHeight` must be less or equal to `WebEdgeLength`
+  - `BottomFlangeSlopeHeight` must be less or equal to double `BottomFlangeThickness`
+
+![AsymmetricIShape (only mandatory properties)](media/ProfilePictures/AsymmetricIShape1.png)
+![AsymmetricIShape (all properties)](media/ProfilePictures/AsymmetricIShape2.png)
+
+### IShapeProfile
+**Derivative properties:**
+- `FlangeInnerEdgeLength` = (`FlangeWidth` - `WebThickness`) / 2
+- `FlangeSlopeHeight` = `FlangeInnerEdgeLength` * Tan(`FlangeSlope`)
+- `WebEdgeLength` = `Depth` - `FlangeThickness` * 2
+
+**Constraints:**
+- `FlangeWidth` must be greater than zero
+- `Depth` must be greater than zero
+- `FlangeThickness`:
+  - must be greater than zero
+  - must be less than half `Depth`
+- `WebThickness`:
+  - must be greater than zero
+  - must be less than `FlangeWidth`
+- `FilletRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half `FlangeInnerEdgeLength`
+  - must be less or equal to half `WebEdgeLength` minus `FlangeSlopeHeight`
+- `FlangeEdgeRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half `FlangeInnerEdgeLength`
+  - must be less or equal to `FlangeThickness`
+- `FlangeSlope` (if set):
+  - must be greater or equal to zero
+  - must be less than ninety degrees
+  - `FlangeSlopeHeight` must be less or equal to `WebEdgeLength`
+  - `FlangeSlopeHeight` must be less or equal to double `FlangeThickness`
+
+![IShape (only mandatory properties)](media/ProfilePictures/IShape1.png)
+![IShape (all properties)](media/ProfilePictures/IShape2.png)
+
+### TShapeProfile
+**Derivative properties:**
+- `FlangeInnerEdgeLength` = (`FlangeWidth` - `WebThickness`) / 2
+- `FlangeSlopeHeight` = `FlangeInnerEdgeLength` * Tan(`FlangeSlope`)
+- `WebEdgeLength` = `Depth` - `FlangeThickness`
+- `WebSlopeHeight` = `WebEdgeLength` * Tan(`WebSlope`)
+
+**Constraints:**
+- `FlangeWidth` must be greater than zero
+- `Depth` must be greater than zero
+- `FlangeThickness`
+  - must be greater than zero
+  - must be less than `Depth`
+- `WebThickness`
+  - must be greater than zero
+  - must be less than `FlangeWidth`
+- `FilletRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half `FlangeInnerEdgeLength` minus `WebSlopeHeight`
+  - must be less or equal to half `WebEdgeLength` minus `FlangeSlopeHeight`
+- `FlangeEdgeRadius`
+  - must be greater or equal to zero
+  - must be less or equal to half `FlangeInnerEdgeLength`
+  - must be less or equal to `FlangeThickness`
+- `FlangeSlope` (if set):
+  - must be greater or equal to zero
+  - must be less than ninety degrees
+  - `FlangeSlopeHeight` must be less or equal to `WebEdgeLength`
+  - `FlangeSlopeHeight` must be less or equal to double `FlangeThickness`
+- `WebEdgeRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half `WebEdgeLength`
+  - must be less or equal to half `WebThickness`
+- `WebSlope` (if set):
+  - must be greater or equal to zero
+  - must be less than ninety degrees
+  - `WebSlopeHeight` must be less or equal to `FlangeInnerEdgeLength`
+  - `WebSlopeHeight` must be less or equal to `WebThickness`
+
+![TShape (only mandatory properties)](media/ProfilePictures/TShape1.png)
+![TShape (all properties)](media/ProfilePictures/TShape2.png)
+
+### LShapeProfile
+**Derivative properties:**
+- `HorizontalLegInnerEdgeLength` = `Width` - `Thickness`
+- `HorizontalLegSlopeHeight` = `HorizontalLegInnerEdgeLength` * Tan(`LegSlope`)
+- `VerticalLegInnerEdgeLength` = `Depth` - `Thickness`
+- `VerticalLegSlopeHeight` = `VerticalLegInnerEdgeLength` * Tan(`LegSlope`)
+
+Note that `EdgeRadius` can be bigger than thickness.
+
+**Constraints:**
+- `Width` must be greater than zero
+- `Depth` must be greater than zero
+- `Thickness`
+  - must be greater than zero
+  - must be less than `Depth`
+  - must be less than `Width`
+- `FilletRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half `HorizontalLegInnerEdgeLength` minus `VerticalLegSlopeHeight`
+  - must be less or equal to half `VerticalLegInnerEdgeLength` minus `HorizontalLegSlopeHeight`
+- `EdgeRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half `HorizontalLegInnerEdgeLength` minus `VerticalLegSlopeHeight`
+  - must be less or equal to half `VerticalLegInnerEdgeLength` minus `HorizontalLegSlopeHeight`
+- `LegSlope` (if set):
+  - must be greater or equal to zero
+  - must be less than ninety degrees
+  - `HorizontalLegSlopeHeight` must be less or equal to `VerticalLegInnerEdgeLength`
+  - `VerticalLegSlopeHeight` must be less or equal to `HorizontalLegInnerEdgeLength`
+  - `HorizontalLegSlopeHeight` must be less or equal to double `Thickness`
+  - `VerticalLegSlopeHeight` must be less or equal to double `Thickness`
+
+![LShape (only mandatory properties)](media/ProfilePictures/LShape1.png)
+![LShape (all properties)](media/ProfilePictures/LShape2.png)
+
+### TTShapeProfile
+**Derivative properties:**
+- `FlangeInnerFaceLength` = (`FlangeWidth` - 2 * `WebThickness` - `WebSpacing`) / 2
+- `FlangeSlopeHeight` = `FlangeInnerFaceLength` * Tan(`FlangeSlope`)
+- `WebOuterFaceLength` = `Depth` - `FlangeThickness` + `FlangeSlopeHeight` / 2
+- `WebInnerFaceLength` = `Depth` - `FlangeThickness` - `FlangeSlopeHeight` / 2
+- `WebOuterSlopeHeight` = `WebOuterFaceLength` * Tan(`WebSlope`)
+- `WebInnerSlopeHeight` = `WebInnerFaceLength` * Tan(`WebSlope`)
+
+**Constraints:**
+- `FlangeWidth` must be greater than zero
+- `Depth` must be greater than zero
+- `FlangeThickness`
+  - must be greater than zero
+  - must be less than `Depth`
+- `WebThickness`
+  - must be greater than zero
+  - two times `WebThickness` plus `WebSpacing` must be less than `FlangeWidth`
+- `WebSpacing`
+  - must be greater than zero
+  - must be less than `FlangeWidth` minus two times `WebThickness`
+- `FilletRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half `FlangeInnerFaceLength` minus `WebOuterSlopeHeight`
+  - must be less or equal to half `OuterFaceLength` minus `FlangeSlopeHeight`
+- `FlangeEdgeRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to `FlangeThickness`
+  - must be less or equal to half `FlangeInnerFaceLength`
+- `FlangeSlope` (if set):
+  - must be greater or equal to zero
+  - must be less than ninety degrees
+  - `FlangeSlopeHeight` must be less or equal to `WebOuterFaceLength`
+  - `FlangeSlopeHeight` must be less or equal to double `FlangeThickness`
+- `WebEdgeRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half `WebThickness`
+  - must be less or equal to half `WebOuterFaceLength`
+- `WebSlope` (if set):
+  - must be greater or equal to zero
+  - must be less than ninety degrees
+  - `WebOuterSlopeHeight` must be less or equal to `FlangeInnerFaceLength`
+  - `WebOuterSlopeHeight` must be less or equal to `WebThickness`
+  - `WebInnerSlopeHeight` must be less or equal to `WebSpacing`
+
+![TTShape (only mandatory properties)](media/ProfilePictures/TTShape1.png)
+![TTShape (all properties)](media/ProfilePictures/TTShape2.png)
+
+### SchifflerizedLShapeProfile
+
+Note that `EdgeRadius` can be bigger than thickness.
+
+**Constraints:**
+- `LegLength` must be greater than zero
+- `Thickness`
+  - must be greater than zero
+  - must be less than `LegLength` divided by square root of three
+- `LegBendOffset` (if set):
+  - must be greater or equal to `Thickness`
+  - must be less than `LegLength` minus `Thickness`
+- `FilletRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to `LegBendOffset` minus `Thickness`
+- `EdgeRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to `LegLength` minus `LegBendOffset` minus `Thickness` multiplied by the tangent of fifteen degrees
+
+![Schifflerized (only mandatory properties)](media/ProfilePictures/Schifflerized1.png)
+![Schifflerized (all properties)](media/ProfilePictures/Schifflerized2.png)
+
+### ZShapeProfile
+**Derivative properties:**
+- `FlangeInnerEdgeLength` = (`FlangeWidth` - `WebThickness`) / 2
+- `FlangeSlopeHeight` = `FlangeInnerEdgeLength` * Tan(`FlangeSlope`)
+- `WebEdgeLength` = `Depth` - `FlangeThickness` * 2
+
+**Constraints:**
+- `FlangeWidth` must be greater than zero
+- `Depth` must be greater than zero
+- `FlangeThickness`
+  - must be greater than zero
+  - must be less than half `Depth`
+- `WebThickness`
+  - must be greater than zero
+  - must be less than `FlangeWith`
+- `FilletRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half `FlangeInnerEdgeLength`
+  - must be less or equal to half `WebEdgeLength` minus `FlangeSlopeHeight`
+- `FlangeEdgeRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to `FlangeThickness`
+  - must be less or equal to half `FlangeInnerEdgeLength`
+- `FlangeSlope` (if set):
+  - must be greater or equal to zero
+  - must be less than ninety degrees
+  - `FlangeSlopeHeight` must be less or equal to `WebEdgeLength`
+  - `FlangeSlopeHeight` must be less or equal to double `FlangeThickness`
+
+![ZShape (only mandatory properties)](media/ProfilePictures/ZShape2.png)
+![ZShape (all properties)](media/ProfilePictures/ZShape1.png)
+
+### DerivedProfile
+[SinglePerimeterProfile](#singleperimeterprofile) that is based on another [SinglePerimeterProfile](#singleperimeterprofile) with applied standard transformations (scale, rotation, translation, mirror). This [Profile](#profile) is defined for compatibility reasons with [IFC](#https://standards.buildingsmart.org/IFC/RELEASE/IFC4/FINAL/HTML/) and its **usage is not recommended**.
+
+Note that deletion of the referenced [SinglePerimeterProfile](#singleperimeterprofile) is prohibited if there are [DerivedProfiles](#derivedprofile) that reference it.
+
+### CenterLineCShapeProfile
+**Constraints:**
+- `FlangeWidth` must be greater than zero
+- `Depth` must be greater than zero
+- `WallThickness`
+  - must be greater than zero
+  - must be less than half `FlangeWidth`
+  - must be less than half `Depth`
+- `FilletRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half `FlangeWidth` minus `WallThickness`
+  - must be less or equal to half `Depth` minus `WallThickness`
+- `Girth` (if set):
+  - must be greater or equal to `WallThickness` plus `FilletRadius`
+  - must be less than half `Depth`
+
+![CenterLineCShape (only mandatory properties)](media/ProfilePictures/CenterCShape1.png)
+![CenterLineCShape (all properties)](media/ProfilePictures/CenterCShape2.png)
+
+### CenterLineLShapeProfile
+**Constraints:**
+- `Width` must be greater than zero
+- `Depth` must be greater than zero
+- `WallThickness`
+  - must be greater than zero
+  - must be less than half `Width`
+  - must be less than half `Depth`
+- `FilletRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half `Width` minus `WallThickness`
+  - must be less or equal to half `Depth` minus `WallThickness`
+- `Girth` (if set):
+  - must be greater than `WallThickness` plus `FilletRadius`
+  - must be less than `Depth` minus `WallThickness`
+
+![CenterLineLShape (only mandatory properties)](media/ProfilePictures/CenterLShape1.png)
+![CenterLineLShape (all properties)](media/ProfilePictures/CenterLShape2.png)
+
+### CenterLineZShapeProfile
+**Constraints:**
+- `FlangeWidth` must be greater than zero
+- `BottomFlangeWidth` (if set):
+  - must be greater than zero
+  - must be greater than half `Girth` plus `WallThickness`
+- `Depth` must be greater than zero
+- `WallThickness`
+  - must be greater than zero
+  - must be less than half `Width`
+  - must be less than half `Depth`
+- `FilletRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half `Depth` minus `WallThickness`
+  - if `Girth` is set:
+    - must be less or equal to half `FlangeWidth` minus `WallThickness`
+    - must be less or equal to `Girth` minus `WallThickness`
+  - if `Girth` is not set:
+    - must be less or equal to `FlangeWidth` minus `WallThickness`
+- `Girth` (if set):
+  - must be greater than `WallThickness`
+- `Girth Slope` (if set):
+  - must have `Girth` set
+  - must be greater or equal to zero
+  - must be less than ninety degrees
+
+![CenterLineZShape (only mandatory properties)](media/ProfilePictures/CenterZShape1.png)
+![CenterLineZShape (all properties)](media/ProfilePictures/CenterZShape2.png)
+
+### BentPlateProfile
+**Derivative properties:**
+- `MaximumWallThickness` = Min(`Width` - `BendOffset`, `BendOffset`) * Tan(`BendAngle` / 2) * 2
+
+**Constraints:**
+- `Width` must be greater than zero
+- `WallThickness`
+  - must be greater than zero
+  - must be less than `MaximumWallThickness`
+- `BendAngle`
+  - must be greater than zero
+  - must be less than one hundred eighty degrees
+- `BendOffset`
+  - must be greater than zero
+  - must be less than `Width`
+- `FilletRadius`
+  - must be greater than zero
+  - must be less or equal to half `MaximumWallThickness` minus half `WallThickness`
+
+![BentPlate](media/ProfilePictures/BentPlate.png)
+
+### CompositeProfile
+
+Abstract [Profile](#profile) class that is comprised of multiple [SinglePerimeterProfiles](#singleperimeterprofile). See [ArbitraryCompositeProfile](#arbitrarycompositeprofile), [DoubleLShapeProfile](#doublelshapeprofile) and [DoubleCShapeProfile](#doublecshapeprofile) for instantiable composite [Profiles](#profile).
+
+### ArbitraryCompositeProfile
+Instantiable [CompositeProfile](#compositeprofile) that is used to define an arbitrary [Profile](#profile) with multiple areas.
+
+This Profile is constructed by inserting [ArbitraryCompositeProfileAspects](#arbitrarycompositeprofileaspects) that reference and transform [SinglePerimeterProfiles](#singleperimeterprofile). [ArbitraryCompositeProfile](#arbitrarycompositeprofile) can reference the same [SinglePerimeterProfile](#singleperimeterprofile) multiple times, but apply different transformations.
+
+**Examples:**
+- An [ArbitraryCompositeProfile](#arbitrarycompositeprofile) that is made up of 2 [Profiles](#profile):
+  - [IShapeProfile](#ishapeprofile) - referenced once with no transformation.
+  - [RectangleProfile](#rectangleprofile) - referenced twice with different `Offset`.
+  - ![ArbitraryComposite (cross)](media/ProfilePictures/ArbitraryComposite1.png)
+
+### ArbitraryCompositeProfileAspect
+
+Aspect that is used by [ArbitraryCompositeProfile](#arbitrarycompositeprofile) to reference [SinglePerimeterProfile](#singleperimeterprofile) from which it is composed.
+
+This aspect also includes fields for transforming the referenced [SinglePerimeterProfile](#singleperimeterprofile) when creating the geometry of [ArbitraryCompositeProfile](#arbitrarycompositeprofile).
+
+### DoubleLShapeProfile
+
+Instantiable [CompositeProfile](#compositeprofile) that models a Double L shape profile where the single [LShapeProfiles](#lshapeprofile) are placed back to back with specified gap between them. This [Profile](#profile) references and requires a [LShapeProfile](#lshapeprofile) to exist in the BIS repository.
+
+Note that deletion of the referenced [LShapeProfile](#lshapeprofile) is prohibited if there are [DoubleLShapeProfiles](#doublelshapeprofile) that reference it.
+
+**Constraints:**
+- `Spacing` must be equal or greater than zero
+
+![DoubleLShape (DoubleLLongLegs)](media/ProfilePictures/DoubleLLongLegs.png)
+![DoubleLShape (DoubleLShortLegs)](media/ProfilePictures/DoubleLShortLegs.png)
+
+### DoubleCShapeProfile
+Instantiable [CompositeProfile](#compositeprofile) that models a Double C shape profile where the single [CShapeProfiles](#cshapeprofile) are placed back to back with specified gap between them. This [Profile](#profile) references and requires a [CShapeProfile](#cshapeprofile) to exist in the BIS repository.
+
+Note that deletion of the referenced [CShapeProfile](#cshapeprofile) is prohibited if there are [DoubleCShapeProfiles](#doublelshapeprofile) that reference it.
+
+**Constraints:**
+- `Spacing` must be equal or greater than zero
+
+![DoubleCShape (DoubleLShortLegs)](media/ProfilePictures/DoubleCShape.png)
+
+### ArbitraryShapeProfile
+
+A [SinglePerimeterProfile](#singleperimeterprofile) whose geometry is defined by an arbitrary single perimeter. Geometry of [ArbitraryShapeProfile](#arbitraryshapeprofile) can have voids i.e. it
+can be formed using a [ParityRegion](https://www.itwinjs.org/reference/core-geometry/curve/parityregion/) (see example of a Profile with a void).
+
+**Constraints:**
+- `Shape` (instance of [CurveCollection](https://www.itwinjs.org/reference/core-geometry/curve/curvecollection/) or [CurvePrimitive](https://www.itwinjs.org/reference/core-geometry/curve/curveprimitive/)
+  - must be closed
+  - must be of a single perimeter
+  - must not self intersect
+  - must be planar and lie on the XY plane
+
+**Examples:**
+- [ArbitraryShapeProfile](#arbitraryshapeprofile) whose `Shape` is a closed [LineString](https://www.itwinjs.org/reference/core-geometry/curve/linestring3d/).
+  - ![ArbitraryShape (cross)](media/ProfilePictures/ArbitraryShape1.png)
+
+- [ArbitraryShapeProfile](#arbitraryshapeprofile) whose `Shape` is a [ParityRegion](https://www.itwinjs.org/reference/core-geometry/curve/parityregion/) of a rectangle
+([LineString](https://www.itwinjs.org/reference/core-geometry/curve/linestring3d/)) and the `Shape` of an [IShapeProfile](#ishapeprofile).
+  - ![ArbitraryShape (IShapeProfile encasing)](media/ProfilePictures/ArbitraryShape2.png)
+
+### ArbitraryCenterLineProfile
+
+Extended [ArbitraryShapeProfile](#arbitraryshapeprofile) with an additional constraint that the defined single perimeter (area) must have a non self intersecting centerline. Geometry of such [Profile](#proflile) is created by applying a constant thickness to the centerline.
+
+[ArbitraryCenterLineProfiles](#arbitrarycenterlineprofile) are often used to model cold-formed sections.
+
+**Examples:**
+- [ArbitraryCenterLineProfile](#arbitrarycenterlineprofile) that defines a "hat" shape profile.
+  - ![ArbitraryCenterline (hat)](media/ProfilePictures/ArbitraryCenterline1.png)
+
+**Constraints:**
+- `WallThickness` must be greater than zero
+- `Centerline`
+  - must be continuous
+  - must not self intersect
+  - must be planar and lie on the XY plane
+
+### EllipseProfile
+**Constraints:**
+- `XRadius` must be greater tan zero
+- `YRadius` must be greater tan zero
+
+![Ellipse](media/ProfilePictures/Ellipse.png)
+
+### CircleProfile
+**Constraints:**
+- `Radius` must be greater tan zero
+
+![Circle](media/ProfilePictures/Circle.png)
+
+### HollowCircleProfile
+**Constraints:**
+- `Radius` must be greater than zero
+- `WallThickness`
+  - must be greater than zero
+  - must be less than `Radius`
+
+![HollowCircle](media/ProfilePictures/HollowCircle.png)
+
+### RectangleProfile
+**Constraints:**
+- `Width` must be greater than zero
+- `Depth` must be greater than zero
+
+![Rectangle](media/ProfilePictures/Rectangle.png)
+
+### RoundedRectangleProfile
+**Constraints:**
+- `Width` must be greater than zero
+- `Depth` must be greater than zero
+- `RoundingRadius`
+  - must be greater than zero
+  - must be less than half `Width`
+  - must be less than half `Depth`
+
+![RoundedRectangle](media/ProfilePictures/RoundedRectangle.png)
+
+### HollowRectangleProfile
+**Constraints:**
+- `Width` must be greater than zero
+- `Depth` must be greater than zero
+- `WallThickness`
+  - must be greater than zero
+  - must be less than half `Width`
+  - must be less than half `Depth`
+- `InnerFilletRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half `Width` minus `WallThickness`
+  - must be less or equal to half `Depth` minus `WallThickness`
+- `OuterFilletRadius` (if set):
+  - must be greater or equal to zero
+  - must be less or equal to half `Width`
+  - must be less or equal to half `Depth`
+  - must be greater than `InnerFilletRadius` plus `WallThickness` multiplied by `2 * Sqrt(2)`
+
+![HollowRectangle (only mandatory properties)](media/ProfilePictures/HollowRectangle1.png)
+![HollowRectangle (all properties)](media/ProfilePictures/HollowRectangle2.png)
+
+### TrapezoidProfile
+**Constraints:**
+- `TopWidth` must be greater than zero
+- `BottomWidth` must be greater than zero
+- `Depth` must be greater than zero
+
+![Trapezoid](media/ProfilePictures/Trapezoid.png)
+
+### RegularPolygonProfile
+**Constraints:**
+- `SideCount` must be greater or equal to `3` and less or equal to `32`
+- `SideLength` must be greater than zero
+
+![RegularPolygon (all properties)](media/ProfilePictures/RegularPolygon.png)
+
+### CapsuleProfile
+**Constraints:**
+- `Width` must be greater than zero
+- `Depth` must be greater than zero
+
+![Capsule](media/ProfilePictures/Capsule.png)
+
+## Mixin Classes
+
+### ICenterLineProfile
+
+Mixin class used to define [Profiles](#profile) with a non self intersecting centerline and a constant thickness. These [Profiles](#profile) are often used to model cold-formed sections. See [CenterLineCShapeProfile](#centerlinecshapeprofile), [CenterLineLShapeProfile](#centerlinelshapeprofile), [CenterLineZShapeProfile](#centerlinezshapeprofile).
+
+## Struct Classes
+
+### CardinalPoint
+
+All [Profiles](#profile) have an array of CardinalPoints containing 19 predefined standard cardinal points. In addition, users may define their own custom cardinal points and append them to the end of the array - in such case the name of the custom CardinalPoint must not clash with names of standard cardinal points.
+
+Standard Cardinal points are:
+- **BottomLeft** - Bottom left corner of the profiles bounding box
+- **BottomCenter** - Middle point of bottom line of the profiles bounding box
+- **BottomRight** - Bottom right corner of the profiles bounding box
+- **MidDepthLeft** - Middle point of left line of the profiles bounding box
+- **MidDepthCenter** - Center point of the profiles bounding box
+- **MidDepthRight** - Middle point of right line of the profiles bounding box
+- **TopLeft** - Top left corner of the profiles bounding box
+- **TopCenter** - Middle point of top line of the profiles bounding box
+- **TopRight** - Top right corner of the profiles bounding box
+- **GeometricCentroid** - Geometric centroid of the profiles geometry
+- **BottomInLineWithGeometricCentroid** - Most bottom point of the profiles geometry thats in-line with **GeometricCentroid**
+- **LeftInLineWithGeometricCentroid** - Most left point of the profiles geometry thats in-line with **GeometricCentroid**
+- **RightInLineWithGeometricCentroid** - Most right point of the profiles geometry thats in-line with **GeometricCentroid**
+- **TopInLineWithGeometricCentroid** - Most top point of the profiles geometry thats in-line with **GeometricCentroid**
+- **ShearCenter** - Shear center of the profiles geometry
+- **BottomInLineWithShearCenter** - Most bottom point of the profiles geometry thats in-line with **ShearCenter**
+- **LeftInLineWithShearCenter** - Most left point of the profiles geometry thats in-line with **ShearCenter**
+- **RightInLineWithShearCenter** - Most right point of the profiles geometry thats in-line with **ShearCenter**
+- **TopInLineWithShearCenter** - Most top point of the profiles geometry thats in-line with **ShearCenter**
+
+## Enumerations
+
+### DoubleLShapeProfileType
+
+Enumeration used to specify how [DoubleLShapeProfiles](#doublelshapeprofile) geometry is created - which "legs" of the [LShapeProfile](#lshapeprofile) are placed back to back.

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@bentley/profiles-schema",
   "license": "MIT",
-  "version": "1.0.3-dev.1",
+  "version": "1.0.3-dev.2",
   "homepage": "https://www.itwinjs.org/",
   "keywords": [
     "Bentley",