@baic/yolk-cli 2.1.0-alpha.9 → 2.1.0-github.0

package/compiled/minimatch/index.js

@@ -0,0 +1,1254 @@
+/******/ (function() { // webpackBootstrap
+/******/ 	var __webpack_modules__ = ({
+
+/***/ 353:
+/***/ (function(module) {
+
+"use strict";
+
+module.exports = balanced;
+function balanced(a, b, str) {
+  if (a instanceof RegExp) a = maybeMatch(a, str);
+  if (b instanceof RegExp) b = maybeMatch(b, str);
+
+  var r = range(a, b, str);
+
+  return r && {
+    start: r[0],
+    end: r[1],
+    pre: str.slice(0, r[0]),
+    body: str.slice(r[0] + a.length, r[1]),
+    post: str.slice(r[1] + b.length)
+  };
+}
+
+function maybeMatch(reg, str) {
+  var m = str.match(reg);
+  return m ? m[0] : null;
+}
+
+balanced.range = range;
+function range(a, b, str) {
+  var begs, beg, left, right, result;
+  var ai = str.indexOf(a);
+  var bi = str.indexOf(b, ai + 1);
+  var i = ai;
+
+  if (ai >= 0 && bi > 0) {
+    if(a===b) {
+      return [ai, bi];
+    }
+    begs = [];
+    left = str.length;
+
+    while (i >= 0 && !result) {
+      if (i == ai) {
+        begs.push(i);
+        ai = str.indexOf(a, i + 1);
+      } else if (begs.length == 1) {
+        result = [ begs.pop(), bi ];
+      } else {
+        beg = begs.pop();
+        if (beg < left) {
+          left = beg;
+          right = bi;
+        }
+
+        bi = str.indexOf(b, i + 1);
+      }
+
+      i = ai < bi && ai >= 0 ? ai : bi;
+    }
+
+    if (begs.length) {
+      result = [ left, right ];
+    }
+  }
+
+  return result;
+}
+
+
+/***/ }),
+
+/***/ 390:
+/***/ (function(module, __unused_webpack_exports, __nccwpck_require__) {
+
+var balanced = __nccwpck_require__(353);
+
+module.exports = expandTop;
+
+var escSlash = '\0SLASH'+Math.random()+'\0';
+var escOpen = '\0OPEN'+Math.random()+'\0';
+var escClose = '\0CLOSE'+Math.random()+'\0';
+var escComma = '\0COMMA'+Math.random()+'\0';
+var escPeriod = '\0PERIOD'+Math.random()+'\0';
+
+function numeric(str) {
+  return parseInt(str, 10) == str
+    ? parseInt(str, 10)
+    : str.charCodeAt(0);
+}
+
+function escapeBraces(str) {
+  return str.split('\\\\').join(escSlash)
+            .split('\\{').join(escOpen)
+            .split('\\}').join(escClose)
+            .split('\\,').join(escComma)
+            .split('\\.').join(escPeriod);
+}
+
+function unescapeBraces(str) {
+  return str.split(escSlash).join('\\')
+            .split(escOpen).join('{')
+            .split(escClose).join('}')
+            .split(escComma).join(',')
+            .split(escPeriod).join('.');
+}
+
+
+// Basically just str.split(","), but handling cases
+// where we have nested braced sections, which should be
+// treated as individual members, like {a,{b,c},d}
+function parseCommaParts(str) {
+  if (!str)
+    return [''];
+
+  var parts = [];
+  var m = balanced('{', '}', str);
+
+  if (!m)
+    return str.split(',');
+
+  var pre = m.pre;
+  var body = m.body;
+  var post = m.post;
+  var p = pre.split(',');
+
+  p[p.length-1] += '{' + body + '}';
+  var postParts = parseCommaParts(post);
+  if (post.length) {
+    p[p.length-1] += postParts.shift();
+    p.push.apply(p, postParts);
+  }
+
+  parts.push.apply(parts, p);
+
+  return parts;
+}
+
+function expandTop(str) {
+  if (!str)
+    return [];
+
+  // I don't know why Bash 4.3 does this, but it does.
+  // Anything starting with {} will have the first two bytes preserved
+  // but *only* at the top level, so {},a}b will not expand to anything,
+  // but a{},b}c will be expanded to [a}c,abc].
+  // One could argue that this is a bug in Bash, but since the goal of
+  // this module is to match Bash's rules, we escape a leading {}
+  if (str.substr(0, 2) === '{}') {
+    str = '\\{\\}' + str.substr(2);
+  }
+
+  return expand(escapeBraces(str), true).map(unescapeBraces);
+}
+
+function embrace(str) {
+  return '{' + str + '}';
+}
+function isPadded(el) {
+  return /^-?0\d/.test(el);
+}
+
+function lte(i, y) {
+  return i <= y;
+}
+function gte(i, y) {
+  return i >= y;
+}
+
+function expand(str, isTop) {
+  var expansions = [];
+
+  var m = balanced('{', '}', str);
+  if (!m) return [str];
+
+  // no need to expand pre, since it is guaranteed to be free of brace-sets
+  var pre = m.pre;
+  var post = m.post.length
+    ? expand(m.post, false)
+    : [''];
+
+  if (/\$$/.test(m.pre)) {    
+    for (var k = 0; k < post.length; k++) {
+      var expansion = pre+ '{' + m.body + '}' + post[k];
+      expansions.push(expansion);
+    }
+  } else {
+    var isNumericSequence = /^-?\d+\.\.-?\d+(?:\.\.-?\d+)?$/.test(m.body);
+    var isAlphaSequence = /^[a-zA-Z]\.\.[a-zA-Z](?:\.\.-?\d+)?$/.test(m.body);
+    var isSequence = isNumericSequence || isAlphaSequence;
+    var isOptions = m.body.indexOf(',') >= 0;
+    if (!isSequence && !isOptions) {
+      // {a},b}
+      if (m.post.match(/,.*\}/)) {
+        str = m.pre + '{' + m.body + escClose + m.post;
+        return expand(str);
+      }
+      return [str];
+    }
+
+    var n;
+    if (isSequence) {
+      n = m.body.split(/\.\./);
+    } else {
+      n = parseCommaParts(m.body);
+      if (n.length === 1) {
+        // x{{a,b}}y ==> x{a}y x{b}y
+        n = expand(n[0], false).map(embrace);
+        if (n.length === 1) {
+          return post.map(function(p) {
+            return m.pre + n[0] + p;
+          });
+        }
+      }
+    }
+
+    // at this point, n is the parts, and we know it's not a comma set
+    // with a single entry.
+    var N;
+
+    if (isSequence) {
+      var x = numeric(n[0]);
+      var y = numeric(n[1]);
+      var width = Math.max(n[0].length, n[1].length)
+      var incr = n.length == 3
+        ? Math.abs(numeric(n[2]))
+        : 1;
+      var test = lte;
+      var reverse = y < x;
+      if (reverse) {
+        incr *= -1;
+        test = gte;
+      }
+      var pad = n.some(isPadded);
+
+      N = [];
+
+      for (var i = x; test(i, y); i += incr) {
+        var c;
+        if (isAlphaSequence) {
+          c = String.fromCharCode(i);
+          if (c === '\\')
+            c = '';
+        } else {
+          c = String(i);
+          if (pad) {
+            var need = width - c.length;
+            if (need > 0) {
+              var z = new Array(need + 1).join('0');
+              if (i < 0)
+                c = '-' + z + c.slice(1);
+              else
+                c = z + c;
+            }
+          }
+        }
+        N.push(c);
+      }
+    } else {
+      N = [];
+
+      for (var j = 0; j < n.length; j++) {
+        N.push.apply(N, expand(n[j], false));
+      }
+    }
+
+    for (var j = 0; j < N.length; j++) {
+      for (var k = 0; k < post.length; k++) {
+        var expansion = pre + N[j] + post[k];
+        if (!isTop || isSequence || expansion)
+          expansions.push(expansion);
+      }
+    }
+  }
+
+  return expansions;
+}
+
+
+
+/***/ }),
+
+/***/ 570:
+/***/ (function(module) {
+
+const isWindows = typeof process === 'object' &&
+  process &&
+  process.platform === 'win32'
+module.exports = isWindows ? { sep: '\\' } : { sep: '/' }
+
+
+/***/ }),
+
+/***/ 11:
+/***/ (function(module, __unused_webpack_exports, __nccwpck_require__) {
+
+const minimatch = module.exports = (p, pattern, options = {}) => {
+  assertValidPattern(pattern)
+
+  // shortcut: comments match nothing.
+  if (!options.nocomment && pattern.charAt(0) === '#') {
+    return false
+  }
+
+  return new Minimatch(pattern, options).match(p)
+}
+
+module.exports = minimatch
+
+const path = __nccwpck_require__(570)
+minimatch.sep = path.sep
+
+const GLOBSTAR = Symbol('globstar **')
+minimatch.GLOBSTAR = GLOBSTAR
+const expand = __nccwpck_require__(390)
+
+const plTypes = {
+  '!': { open: '(?:(?!(?:', close: '))[^/]*?)'},
+  '?': { open: '(?:', close: ')?' },
+  '+': { open: '(?:', close: ')+' },
+  '*': { open: '(?:', close: ')*' },
+  '@': { open: '(?:', close: ')' }
+}
+
+// any single thing other than /
+// don't need to escape / when using new RegExp()
+const qmark = '[^/]'
+
+// * => any number of characters
+const star = qmark + '*?'
+
+// ** when dots are allowed.  Anything goes, except .. and .
+// not (^ or / followed by one or two dots followed by $ or /),
+// followed by anything, any number of times.
+const twoStarDot = '(?:(?!(?:\\\/|^)(?:\\.{1,2})($|\\\/)).)*?'
+
+// not a ^ or / followed by a dot,
+// followed by anything, any number of times.
+const twoStarNoDot = '(?:(?!(?:\\\/|^)\\.).)*?'
+
+// "abc" -> { a:true, b:true, c:true }
+const charSet = s => s.split('').reduce((set, c) => {
+  set[c] = true
+  return set
+}, {})
+
+// characters that need to be escaped in RegExp.
+const reSpecials = charSet('().*{}+?[]^$\\!')
+
+// characters that indicate we have to add the pattern start
+const addPatternStartSet = charSet('[.(')
+
+// normalizes slashes.
+const slashSplit = /\/+/
+
+minimatch.filter = (pattern, options = {}) =>
+  (p, i, list) => minimatch(p, pattern, options)
+
+const ext = (a, b = {}) => {
+  const t = {}
+  Object.keys(a).forEach(k => t[k] = a[k])
+  Object.keys(b).forEach(k => t[k] = b[k])
+  return t
+}
+
+minimatch.defaults = def => {
+  if (!def || typeof def !== 'object' || !Object.keys(def).length) {
+    return minimatch
+  }
+
+  const orig = minimatch
+
+  const m = (p, pattern, options) => orig(p, pattern, ext(def, options))
+  m.Minimatch = class Minimatch extends orig.Minimatch {
+    constructor (pattern, options) {
+      super(pattern, ext(def, options))
+    }
+  }
+  m.Minimatch.defaults = options => orig.defaults(ext(def, options)).Minimatch
+  m.filter = (pattern, options) => orig.filter(pattern, ext(def, options))
+  m.defaults = options => orig.defaults(ext(def, options))
+  m.makeRe = (pattern, options) => orig.makeRe(pattern, ext(def, options))
+  m.braceExpand = (pattern, options) => orig.braceExpand(pattern, ext(def, options))
+  m.match = (list, pattern, options) => orig.match(list, pattern, ext(def, options))
+
+  return m
+}
+
+
+
+
+
+// Brace expansion:
+// a{b,c}d -> abd acd
+// a{b,}c -> abc ac
+// a{0..3}d -> a0d a1d a2d a3d
+// a{b,c{d,e}f}g -> abg acdfg acefg
+// a{b,c}d{e,f}g -> abdeg acdeg abdeg abdfg
+//
+// Invalid sets are not expanded.
+// a{2..}b -> a{2..}b
+// a{b}c -> a{b}c
+minimatch.braceExpand = (pattern, options) => braceExpand(pattern, options)
+
+const braceExpand = (pattern, options = {}) => {
+  assertValidPattern(pattern)
+
+  // Thanks to Yeting Li <https://github.com/yetingli> for
+  // improving this regexp to avoid a ReDOS vulnerability.
+  if (options.nobrace || !/\{(?:(?!\{).)*\}/.test(pattern)) {
+    // shortcut. no need to expand.
+    return [pattern]
+  }
+
+  return expand(pattern)
+}
+
+const MAX_PATTERN_LENGTH = 1024 * 64
+const assertValidPattern = pattern => {
+  if (typeof pattern !== 'string') {
+    throw new TypeError('invalid pattern')
+  }
+
+  if (pattern.length > MAX_PATTERN_LENGTH) {
+    throw new TypeError('pattern is too long')
+  }
+}
+
+// parse a component of the expanded set.
+// At this point, no pattern may contain "/" in it
+// so we're going to return a 2d array, where each entry is the full
+// pattern, split on '/', and then turned into a regular expression.
+// A regexp is made at the end which joins each array with an
+// escaped /, and another full one which joins each regexp with |.
+//
+// Following the lead of Bash 4.1, note that "**" only has special meaning
+// when it is the *only* thing in a path portion.  Otherwise, any series
+// of * is equivalent to a single *.  Globstar behavior is enabled by
+// default, and can be disabled by setting options.noglobstar.
+const SUBPARSE = Symbol('subparse')
+
+minimatch.makeRe = (pattern, options) =>
+  new Minimatch(pattern, options || {}).makeRe()
+
+minimatch.match = (list, pattern, options = {}) => {
+  const mm = new Minimatch(pattern, options)
+  list = list.filter(f => mm.match(f))
+  if (mm.options.nonull && !list.length) {
+    list.push(pattern)
+  }
+  return list
+}
+
+// replace stuff like \* with *
+const globUnescape = s => s.replace(/\\(.)/g, '$1')
+const regExpEscape = s => s.replace(/[-[\]{}()*+?.,\\^$|#\s]/g, '\\$&')
+
+class Minimatch {
+  constructor (pattern, options) {
+    assertValidPattern(pattern)
+
+    if (!options) options = {}
+
+    this.options = options
+    this.set = []
+    this.pattern = pattern
+    this.windowsPathsNoEscape = !!options.windowsPathsNoEscape ||
+      options.allowWindowsEscape === false
+    if (this.windowsPathsNoEscape) {
+      this.pattern = this.pattern.replace(/\\/g, '/')
+    }
+    this.regexp = null
+    this.negate = false
+    this.comment = false
+    this.empty = false
+    this.partial = !!options.partial
+
+    // make the set of regexps etc.
+    this.make()
+  }
+
+  debug () {}
+
+  make () {
+    const pattern = this.pattern
+    const options = this.options
+
+    // empty patterns and comments match nothing.
+    if (!options.nocomment && pattern.charAt(0) === '#') {
+      this.comment = true
+      return
+    }
+    if (!pattern) {
+      this.empty = true
+      return
+    }
+
+    // step 1: figure out negation, etc.
+    this.parseNegate()
+
+    // step 2: expand braces
+    let set = this.globSet = this.braceExpand()
+
+    if (options.debug) this.debug = (...args) => console.error(...args)
+
+    this.debug(this.pattern, set)
+
+    // step 3: now we have a set, so turn each one into a series of path-portion
+    // matching patterns.
+    // These will be regexps, except in the case of "**", which is
+    // set to the GLOBSTAR object for globstar behavior,
+    // and will not contain any / characters
+    set = this.globParts = set.map(s => s.split(slashSplit))
+
+    this.debug(this.pattern, set)
+
+    // glob --> regexps
+    set = set.map((s, si, set) => s.map(this.parse, this))
+
+    this.debug(this.pattern, set)
+
+    // filter out everything that didn't compile properly.
+    set = set.filter(s => s.indexOf(false) === -1)
+
+    this.debug(this.pattern, set)
+
+    this.set = set
+  }
+
+  parseNegate () {
+    if (this.options.nonegate) return
+
+    const pattern = this.pattern
+    let negate = false
+    let negateOffset = 0
+
+    for (let i = 0; i < pattern.length && pattern.charAt(i) === '!'; i++) {
+      negate = !negate
+      negateOffset++
+    }
+
+    if (negateOffset) this.pattern = pattern.substr(negateOffset)
+    this.negate = negate
+  }
+
+  // set partial to true to test if, for example,
+  // "/a/b" matches the start of "/*/b/*/d"
+  // Partial means, if you run out of file before you run
+  // out of pattern, then that's fine, as long as all
+  // the parts match.
+  matchOne (file, pattern, partial) {
+    var options = this.options
+
+    this.debug('matchOne',
+      { 'this': this, file: file, pattern: pattern })
+
+    this.debug('matchOne', file.length, pattern.length)
+
+    for (var fi = 0,
+        pi = 0,
+        fl = file.length,
+        pl = pattern.length
+        ; (fi < fl) && (pi < pl)
+        ; fi++, pi++) {
+      this.debug('matchOne loop')
+      var p = pattern[pi]
+      var f = file[fi]
+
+      this.debug(pattern, p, f)
+
+      // should be impossible.
+      // some invalid regexp stuff in the set.
+      /* istanbul ignore if */
+      if (p === false) return false
+
+      if (p === GLOBSTAR) {
+        this.debug('GLOBSTAR', [pattern, p, f])
+
+        // "**"
+        // a/**/b/**/c would match the following:
+        // a/b/x/y/z/c
+        // a/x/y/z/b/c
+        // a/b/x/b/x/c
+        // a/b/c
+        // To do this, take the rest of the pattern after
+        // the **, and see if it would match the file remainder.
+        // If so, return success.
+        // If not, the ** "swallows" a segment, and try again.
+        // This is recursively awful.
+        //
+        // a/**/b/**/c matching a/b/x/y/z/c
+        // - a matches a
+        // - doublestar
+        //   - matchOne(b/x/y/z/c, b/**/c)
+        //     - b matches b
+        //     - doublestar
+        //       - matchOne(x/y/z/c, c) -> no
+        //       - matchOne(y/z/c, c) -> no
+        //       - matchOne(z/c, c) -> no
+        //       - matchOne(c, c) yes, hit
+        var fr = fi
+        var pr = pi + 1
+        if (pr === pl) {
+          this.debug('** at the end')
+          // a ** at the end will just swallow the rest.
+          // We have found a match.
+          // however, it will not swallow /.x, unless
+          // options.dot is set.
+          // . and .. are *never* matched by **, for explosively
+          // exponential reasons.
+          for (; fi < fl; fi++) {
+            if (file[fi] === '.' || file[fi] === '..' ||
+              (!options.dot && file[fi].charAt(0) === '.')) return false
+          }
+          return true
+        }
+
+        // ok, let's see if we can swallow whatever we can.
+        while (fr < fl) {
+          var swallowee = file[fr]
+
+          this.debug('\nglobstar while', file, fr, pattern, pr, swallowee)
+
+          // XXX remove this slice.  Just pass the start index.
+          if (this.matchOne(file.slice(fr), pattern.slice(pr), partial)) {
+            this.debug('globstar found match!', fr, fl, swallowee)
+            // found a match.
+            return true
+          } else {
+            // can't swallow "." or ".." ever.
+            // can only swallow ".foo" when explicitly asked.
+            if (swallowee === '.' || swallowee === '..' ||
+              (!options.dot && swallowee.charAt(0) === '.')) {
+              this.debug('dot detected!', file, fr, pattern, pr)
+              break
+            }
+
+            // ** swallows a segment, and continue.
+            this.debug('globstar swallow a segment, and continue')
+            fr++
+          }
+        }
+
+        // no match was found.
+        // However, in partial mode, we can't say this is necessarily over.
+        // If there's more *pattern* left, then
+        /* istanbul ignore if */
+        if (partial) {
+          // ran out of file
+          this.debug('\n>>> no match, partial?', file, fr, pattern, pr)
+          if (fr === fl) return true
+        }
+        return false
+      }
+
+      // something other than **
+      // non-magic patterns just have to match exactly
+      // patterns with magic have been turned into regexps.
+      var hit
+      if (typeof p === 'string') {
+        hit = f === p
+        this.debug('string match', p, f, hit)
+      } else {
+        hit = f.match(p)
+        this.debug('pattern match', p, f, hit)
+      }
+
+      if (!hit) return false
+    }
+
+    // Note: ending in / means that we'll get a final ""
+    // at the end of the pattern.  This can only match a
+    // corresponding "" at the end of the file.
+    // If the file ends in /, then it can only match a
+    // a pattern that ends in /, unless the pattern just
+    // doesn't have any more for it. But, a/b/ should *not*
+    // match "a/b/*", even though "" matches against the
+    // [^/]*? pattern, except in partial mode, where it might
+    // simply not be reached yet.
+    // However, a/b/ should still satisfy a/*
+
+    // now either we fell off the end of the pattern, or we're done.
+    if (fi === fl && pi === pl) {
+      // ran out of pattern and filename at the same time.
+      // an exact hit!
+      return true
+    } else if (fi === fl) {
+      // ran out of file, but still had pattern left.
+      // this is ok if we're doing the match as part of
+      // a glob fs traversal.
+      return partial
+    } else /* istanbul ignore else */ if (pi === pl) {
+      // ran out of pattern, still have file left.
+      // this is only acceptable if we're on the very last
+      // empty segment of a file with a trailing slash.
+      // a/* should match a/b/
+      return (fi === fl - 1) && (file[fi] === '')
+    }
+
+    // should be unreachable.
+    /* istanbul ignore next */
+    throw new Error('wtf?')
+  }
+
+  braceExpand () {
+    return braceExpand(this.pattern, this.options)
+  }
+
+  parse (pattern, isSub) {
+    assertValidPattern(pattern)
+
+    const options = this.options
+
+    // shortcuts
+    if (pattern === '**') {
+      if (!options.noglobstar)
+        return GLOBSTAR
+      else
+        pattern = '*'
+    }
+    if (pattern === '') return ''
+
+    let re = ''
+    let hasMagic = !!options.nocase
+    let escaping = false
+    // ? => one single character
+    const patternListStack = []
+    const negativeLists = []
+    let stateChar
+    let inClass = false
+    let reClassStart = -1
+    let classStart = -1
+    let cs
+    let pl
+    let sp
+    // . and .. never match anything that doesn't start with .,
+    // even when options.dot is set.
+    const patternStart = pattern.charAt(0) === '.' ? '' // anything
+    // not (start or / followed by . or .. followed by / or end)
+    : options.dot ? '(?!(?:^|\\\/)\\.{1,2}(?:$|\\\/))'
+    : '(?!\\.)'
+
+    const clearStateChar = () => {
+      if (stateChar) {
+        // we had some state-tracking character
+        // that wasn't consumed by this pass.
+        switch (stateChar) {
+          case '*':
+            re += star
+            hasMagic = true
+          break
+          case '?':
+            re += qmark
+            hasMagic = true
+          break
+          default:
+            re += '\\' + stateChar
+          break
+        }
+        this.debug('clearStateChar %j %j', stateChar, re)
+        stateChar = false
+      }
+    }
+
+    for (let i = 0, c; (i < pattern.length) && (c = pattern.charAt(i)); i++) {
+      this.debug('%s\t%s %s %j', pattern, i, re, c)
+
+      // skip over any that are escaped.
+      if (escaping) {
+        /* istanbul ignore next - completely not allowed, even escaped. */
+        if (c === '/') {
+          return false
+        }
+
+        if (reSpecials[c]) {
+          re += '\\'
+        }
+        re += c
+        escaping = false
+        continue
+      }
+
+      switch (c) {
+        /* istanbul ignore next */
+        case '/': {
+          // Should already be path-split by now.
+          return false
+        }
+
+        case '\\':
+          clearStateChar()
+          escaping = true
+        continue
+
+        // the various stateChar values
+        // for the "extglob" stuff.
+        case '?':
+        case '*':
+        case '+':
+        case '@':
+        case '!':
+          this.debug('%s\t%s %s %j <-- stateChar', pattern, i, re, c)
+
+          // all of those are literals inside a class, except that
+          // the glob [!a] means [^a] in regexp
+          if (inClass) {
+            this.debug('  in class')
+            if (c === '!' && i === classStart + 1) c = '^'
+            re += c
+            continue
+          }
+
+          // if we already have a stateChar, then it means
+          // that there was something like ** or +? in there.
+          // Handle the stateChar, then proceed with this one.
+          this.debug('call clearStateChar %j', stateChar)
+          clearStateChar()
+          stateChar = c
+          // if extglob is disabled, then +(asdf|foo) isn't a thing.
+          // just clear the statechar *now*, rather than even diving into
+          // the patternList stuff.
+          if (options.noext) clearStateChar()
+        continue
+
+        case '(':
+          if (inClass) {
+            re += '('
+            continue
+          }
+
+          if (!stateChar) {
+            re += '\\('
+            continue
+          }
+
+          patternListStack.push({
+            type: stateChar,
+            start: i - 1,
+            reStart: re.length,
+            open: plTypes[stateChar].open,
+            close: plTypes[stateChar].close
+          })
+          // negation is (?:(?!js)[^/]*)
+          re += stateChar === '!' ? '(?:(?!(?:' : '(?:'
+          this.debug('plType %j %j', stateChar, re)
+          stateChar = false
+        continue
+
+        case ')':
+          if (inClass || !patternListStack.length) {
+            re += '\\)'
+            continue
+          }
+
+          clearStateChar()
+          hasMagic = true
+          pl = patternListStack.pop()
+          // negation is (?:(?!js)[^/]*)
+          // The others are (?:<pattern>)<type>
+          re += pl.close
+          if (pl.type === '!') {
+            negativeLists.push(pl)
+          }
+          pl.reEnd = re.length
+        continue
+
+        case '|':
+          if (inClass || !patternListStack.length) {
+            re += '\\|'
+            continue
+          }
+
+          clearStateChar()
+          re += '|'
+        continue
+
+        // these are mostly the same in regexp and glob
+        case '[':
+          // swallow any state-tracking char before the [
+          clearStateChar()
+
+          if (inClass) {
+            re += '\\' + c
+            continue
+          }
+
+          inClass = true
+          classStart = i
+          reClassStart = re.length
+          re += c
+        continue
+
+        case ']':
+          //  a right bracket shall lose its special
+          //  meaning and represent itself in
+          //  a bracket expression if it occurs
+          //  first in the list.  -- POSIX.2 2.8.3.2
+          if (i === classStart + 1 || !inClass) {
+            re += '\\' + c
+            continue
+          }
+
+          // handle the case where we left a class open.
+          // "[z-a]" is valid, equivalent to "\[z-a\]"
+          // split where the last [ was, make sure we don't have
+          // an invalid re. if so, re-walk the contents of the
+          // would-be class to re-translate any characters that
+          // were passed through as-is
+          // TODO: It would probably be faster to determine this
+          // without a try/catch and a new RegExp, but it's tricky
+          // to do safely.  For now, this is safe and works.
+          cs = pattern.substring(classStart + 1, i)
+          try {
+            RegExp('[' + cs + ']')
+          } catch (er) {
+            // not a valid class!
+            sp = this.parse(cs, SUBPARSE)
+            re = re.substr(0, reClassStart) + '\\[' + sp[0] + '\\]'
+            hasMagic = hasMagic || sp[1]
+            inClass = false
+            continue
+          }
+
+          // finish up the class.
+          hasMagic = true
+          inClass = false
+          re += c
+        continue
+
+        default:
+          // swallow any state char that wasn't consumed
+          clearStateChar()
+
+          if (reSpecials[c] && !(c === '^' && inClass)) {
+            re += '\\'
+          }
+
+          re += c
+          break
+
+      } // switch
+    } // for
+
+    // handle the case where we left a class open.
+    // "[abc" is valid, equivalent to "\[abc"
+    if (inClass) {
+      // split where the last [ was, and escape it
+      // this is a huge pita.  We now have to re-walk
+      // the contents of the would-be class to re-translate
+      // any characters that were passed through as-is
+      cs = pattern.substr(classStart + 1)
+      sp = this.parse(cs, SUBPARSE)
+      re = re.substr(0, reClassStart) + '\\[' + sp[0]
+      hasMagic = hasMagic || sp[1]
+    }
+
+    // handle the case where we had a +( thing at the *end*
+    // of the pattern.
+    // each pattern list stack adds 3 chars, and we need to go through
+    // and escape any | chars that were passed through as-is for the regexp.
+    // Go through and escape them, taking care not to double-escape any
+    // | chars that were already escaped.
+    for (pl = patternListStack.pop(); pl; pl = patternListStack.pop()) {
+      let tail
+      tail = re.slice(pl.reStart + pl.open.length)
+      this.debug('setting tail', re, pl)
+      // maybe some even number of \, then maybe 1 \, followed by a |
+      tail = tail.replace(/((?:\\{2}){0,64})(\\?)\|/g, (_, $1, $2) => {
+        /* istanbul ignore else - should already be done */
+        if (!$2) {
+          // the | isn't already escaped, so escape it.
+          $2 = '\\'
+        }
+
+        // need to escape all those slashes *again*, without escaping the
+        // one that we need for escaping the | character.  As it works out,
+        // escaping an even number of slashes can be done by simply repeating
+        // it exactly after itself.  That's why this trick works.
+        //
+        // I am sorry that you have to see this.
+        return $1 + $1 + $2 + '|'
+      })
+
+      this.debug('tail=%j\n   %s', tail, tail, pl, re)
+      const t = pl.type === '*' ? star
+        : pl.type === '?' ? qmark
+        : '\\' + pl.type
+
+      hasMagic = true
+      re = re.slice(0, pl.reStart) + t + '\\(' + tail
+    }
+
+    // handle trailing things that only matter at the very end.
+    clearStateChar()
+    if (escaping) {
+      // trailing \\
+      re += '\\\\'
+    }
+
+    // only need to apply the nodot start if the re starts with
+    // something that could conceivably capture a dot
+    const addPatternStart = addPatternStartSet[re.charAt(0)]
+
+    // Hack to work around lack of negative lookbehind in JS
+    // A pattern like: *.!(x).!(y|z) needs to ensure that a name
+    // like 'a.xyz.yz' doesn't match.  So, the first negative
+    // lookahead, has to look ALL the way ahead, to the end of
+    // the pattern.
+    for (let n = negativeLists.length - 1; n > -1; n--) {
+      const nl = negativeLists[n]
+
+      const nlBefore = re.slice(0, nl.reStart)
+      const nlFirst = re.slice(nl.reStart, nl.reEnd - 8)
+      let nlAfter = re.slice(nl.reEnd)
+      const nlLast = re.slice(nl.reEnd - 8, nl.reEnd) + nlAfter
+
+      // Handle nested stuff like *(*.js|!(*.json)), where open parens
+      // mean that we should *not* include the ) in the bit that is considered
+      // "after" the negated section.
+      const openParensBefore = nlBefore.split('(').length - 1
+      let cleanAfter = nlAfter
+      for (let i = 0; i < openParensBefore; i++) {
+        cleanAfter = cleanAfter.replace(/\)[+*?]?/, '')
+      }
+      nlAfter = cleanAfter
+
+      const dollar = nlAfter === '' && isSub !== SUBPARSE ? '$' : ''
+      re = nlBefore + nlFirst + nlAfter + dollar + nlLast
+    }
+
+    // if the re is not "" at this point, then we need to make sure
+    // it doesn't match against an empty path part.
+    // Otherwise a/* will match a/, which it should not.
+    if (re !== '' && hasMagic) {
+      re = '(?=.)' + re
+    }
+
+    if (addPatternStart) {
+      re = patternStart + re
+    }
+
+    // parsing just a piece of a larger pattern.
+    if (isSub === SUBPARSE) {
+      return [re, hasMagic]
+    }
+
+    // skip the regexp for non-magical patterns
+    // unescape anything in it, though, so that it'll be
+    // an exact match against a file etc.
+    if (!hasMagic) {
+      return globUnescape(pattern)
+    }
+
+    const flags = options.nocase ? 'i' : ''
+    try {
+      return Object.assign(new RegExp('^' + re + '$', flags), {
+        _glob: pattern,
+        _src: re,
+      })
+    } catch (er) /* istanbul ignore next - should be impossible */ {
+      // If it was an invalid regular expression, then it can't match
+      // anything.  This trick looks for a character after the end of
+      // the string, which is of course impossible, except in multi-line
+      // mode, but it's not a /m regex.
+      return new RegExp('$.')
+    }
+  }
+
+  makeRe () {
+    if (this.regexp || this.regexp === false) return this.regexp
+
+    // at this point, this.set is a 2d array of partial
+    // pattern strings, or "**".
+    //
+    // It's better to use .match().  This function shouldn't
+    // be used, really, but it's pretty convenient sometimes,
+    // when you just want to work with a regex.
+    const set = this.set
+
+    if (!set.length) {
+      this.regexp = false
+      return this.regexp
+    }
+    const options = this.options
+
+    const twoStar = options.noglobstar ? star
+      : options.dot ? twoStarDot
+      : twoStarNoDot
+    const flags = options.nocase ? 'i' : ''
+
+    // coalesce globstars and regexpify non-globstar patterns
+    // if it's the only item, then we just do one twoStar
+    // if it's the first, and there are more, prepend (\/|twoStar\/)? to next
+    // if it's the last, append (\/twoStar|) to previous
+    // if it's in the middle, append (\/|\/twoStar\/) to previous
+    // then filter out GLOBSTAR symbols
+    let re = set.map(pattern => {
+      pattern = pattern.map(p =>
+        typeof p === 'string' ? regExpEscape(p)
+        : p === GLOBSTAR ? GLOBSTAR
+        : p._src
+      ).reduce((set, p) => {
+        if (!(set[set.length - 1] === GLOBSTAR && p === GLOBSTAR)) {
+          set.push(p)
+        }
+        return set
+      }, [])
+      pattern.forEach((p, i) => {
+        if (p !== GLOBSTAR || pattern[i-1] === GLOBSTAR) {
+          return
+        }
+        if (i === 0) {
+          if (pattern.length > 1) {
+            pattern[i+1] = '(?:\\\/|' + twoStar + '\\\/)?' + pattern[i+1]
+          } else {
+            pattern[i] = twoStar
+          }
+        } else if (i === pattern.length - 1) {
+          pattern[i-1] += '(?:\\\/|' + twoStar + ')?'
+        } else {
+          pattern[i-1] += '(?:\\\/|\\\/' + twoStar + '\\\/)' + pattern[i+1]
+          pattern[i+1] = GLOBSTAR
+        }
+      })
+      return pattern.filter(p => p !== GLOBSTAR).join('/')
+    }).join('|')
+
+    // must match entire pattern
+    // ending in a * or ** will make it less strict.
+    re = '^(?:' + re + ')$'
+
+    // can match anything, as long as it's not this.
+    if (this.negate) re = '^(?!' + re + ').*$'
+
+    try {
+      this.regexp = new RegExp(re, flags)
+    } catch (ex) /* istanbul ignore next - should be impossible */ {
+      this.regexp = false
+    }
+    return this.regexp
+  }
+
+  match (f, partial = this.partial) {
+    this.debug('match', f, this.pattern)
+    // short-circuit in the case of busted things.
+    // comments, etc.
+    if (this.comment) return false
+    if (this.empty) return f === ''
+
+    if (f === '/' && partial) return true
+
+    const options = this.options
+
+    // windows: need to use /, not \
+    if (path.sep !== '/') {
+      f = f.split(path.sep).join('/')
+    }
+
+    // treat the test path as a set of pathparts.
+    f = f.split(slashSplit)
+    this.debug(this.pattern, 'split', f)
+
+    // just ONE of the pattern sets in this.set needs to match
+    // in order for it to be valid.  If negating, then just one
+    // match means that we have failed.
+    // Either way, return on the first hit.
+
+    const set = this.set
+    this.debug(this.pattern, 'set', set)
+
+    // Find the basename of the path by looking for the last non-empty segment
+    let filename
+    for (let i = f.length - 1; i >= 0; i--) {
+      filename = f[i]
+      if (filename) break
+    }
+
+    for (let i = 0; i < set.length; i++) {
+      const pattern = set[i]
+      let file = f
+      if (options.matchBase && pattern.length === 1) {
+        file = [filename]
+      }
+      const hit = this.matchOne(file, pattern, partial)
+      if (hit) {
+        if (options.flipNegate) return true
+        return !this.negate
+      }
+    }
+
+    // didn't get any hits.  this is success if it's a negative
+    // pattern, failure otherwise.
+    if (options.flipNegate) return false
+    return this.negate
+  }
+
+  static defaults (def) {
+    return minimatch.defaults(def).Minimatch
+  }
+}
+
+minimatch.Minimatch = Minimatch
+
+
+/***/ })
+
+/******/ 	});
+/************************************************************************/
+/******/ 	// The module cache
+/******/ 	var __webpack_module_cache__ = {};
+/******/ 	
+/******/ 	// The require function
+/******/ 	function __nccwpck_require__(moduleId) {
+/******/ 		// Check if module is in cache
+/******/ 		var cachedModule = __webpack_module_cache__[moduleId];
+/******/ 		if (cachedModule !== undefined) {
+/******/ 			return cachedModule.exports;
+/******/ 		}
+/******/ 		// Create a new module (and put it into the cache)
+/******/ 		var module = __webpack_module_cache__[moduleId] = {
+/******/ 			// no module.id needed
+/******/ 			// no module.loaded needed
+/******/ 			exports: {}
+/******/ 		};
+/******/ 	
+/******/ 		// Execute the module function
+/******/ 		var threw = true;
+/******/ 		try {
+/******/ 			__webpack_modules__[moduleId](module, module.exports, __nccwpck_require__);
+/******/ 			threw = false;
+/******/ 		} finally {
+/******/ 			if(threw) delete __webpack_module_cache__[moduleId];
+/******/ 		}
+/******/ 	
+/******/ 		// Return the exports of the module
+/******/ 		return module.exports;
+/******/ 	}
+/******/ 	
+/************************************************************************/
+/******/ 	/* webpack/runtime/compat */
+/******/ 	
+/******/ 	if (typeof __nccwpck_require__ !== 'undefined') __nccwpck_require__.ab = __dirname + "/";
+/******/ 	
+/************************************************************************/
+/******/ 	
+/******/ 	// startup
+/******/ 	// Load entry module and return exports
+/******/ 	// This entry module is referenced by other modules so it can't be inlined
+/******/ 	var __webpack_exports__ = __nccwpck_require__(11);
+/******/ 	module.exports = __webpack_exports__;
+/******/ 	
+/******/ })()
+;