@aztec/stdlib 0.0.1-commit.2d9cb6034 → 0.0.1-commit.2e20a94

package/src/gas/README.md

@@ -84,6 +84,37 @@ else                    →  use post (new fees)
 **Net effect**: L1 fee changes reach L2 with a 2-slot delay and can update at most once
 every 5 slots.
 
+### Worked Example
+
+Suppose the oracle is updated at slot 10 with new L1 fees. Here is the timeline:
+
+```
+Slot  Oracle state          Active fees   Notes
+────  ────────────────────  ────────────  ──────────────────────────────────
+ 10   pre=A, post=B, soc=12   A           Update queued. slotOfChange = 10 + LAG = 12.
+ 11   (same)                  A           Still before slotOfChange → pre (A).
+ 12   (same)                  B           slot >= slotOfChange → post (B) activates.
+ 13   (same)                  B           B remains active.
+ 14   (same)                  B           B remains active.
+ 15   Update allowed again    B           Earliest next update: soc + (LIFETIME - LAG)
+                                          = 12 + 3 = 15.
+```
+ 
+Key observations:
+
+1. **Slots 10-11**: The old fees (A) are still in effect. Transactions submitted during
+   these slots see the old L1 cost. This is the **LAG** window — it gives pending
+   transactions 2 slots to land before fees change.
+
+2. **Slot 12**: The new fees (B) activate. Any checkpoint proposed at slot >= 12 uses B
+   for its sequencer/prover cost calculation.
+
+3. **Slots 12-14**: No new oracle update is accepted. The system is in a **cooldown**
+   period of `LIFETIME - LAG = 3` slots after the transition.
+
+4. **Slot 15**: A new oracle update can be queued (earliest `acceptableSlot`). If
+   triggered, the new values would activate at slot 15 + LAG = 17.
+
 ## Fee Asset Price
 
 Fees are computed in ETH internally but converted to the fee asset (Fee Juice) via

package/src/gas/fee_math.ts

@@ -0,0 +1,120 @@
+/**
+ * TypeScript port of fee computation logic from FeeLib.sol.
+ * Used to predict worst-case min fees over a future window of L2 slots.
+ */
+
+// Constants matching FeeLib.sol
+export const MINIMUM_CONGESTION_MULTIPLIER = 1_000_000_000n;
+export const L1_GAS_PER_CHECKPOINT_PROPOSED = 300_000n;
+export const L1_GAS_PER_EPOCH_VERIFIED = 3_600_000n;
+export const BLOBS_PER_CHECKPOINT = 3n;
+export const BLOB_GAS_PER_BLOB = 2n ** 17n;
+export const MAGIC_CONGESTION_VALUE_MULTIPLIER = 854_700_854n;
+export const MAGIC_CONGESTION_VALUE_DIVISOR = 100_000_000n;
+export const ETH_PER_FEE_ASSET_PRECISION = 1_000_000_000_000n;
+export const MIN_ETH_PER_FEE_ASSET = 100n;
+
+/** Number of L2 slots of lag before new oracle values activate. Defines the prediction window. */
+export const FEE_ORACLE_LAG = 2;
+
+/** Expected mana usage per checkpoint for fee prediction. */
+export enum ManaUsageEstimate {
+  /** No usage — fees decrease as congestion drains. */
+  None = 'none',
+  /** Target usage — congestion stays roughly flat (steady state). */
+  Target = 'target',
+  /** Limit usage (2x target) — worst case, congestion grows maximally. */
+  Limit = 'limit',
+}
+
+/** Parameters for computing the mana min fee at a given point in time. */
+export type ManaMinFeeParams = {
+  l1BaseFee: bigint;
+  l1BlobFee: bigint;
+  manaTarget: bigint;
+  epochDuration: bigint;
+  provingCostPerManaEth: bigint;
+  excessMana: bigint;
+  ethPerFeeAsset: bigint;
+};
+
+/**
+ * Taylor series approximation of `factor * e^(numerator/denominator)`.
+ * Direct port of FeeLib.sol fakeExponential (EIP-4844 style).
+ */
+export function fakeExponential(factor: bigint, numerator: bigint, denominator: bigint): bigint {
+  let i = 1n;
+  let output = 0n;
+  let numeratorAccumulator = factor * denominator;
+  while (numeratorAccumulator > 0n) {
+    output += numeratorAccumulator;
+    numeratorAccumulator = (numeratorAccumulator * numerator) / (denominator * i);
+    i += 1n;
+  }
+  return output / denominator;
+}
+
+/** Computes excess mana for the next checkpoint, clamped to zero. */
+export function computeExcessMana(prevExcessMana: bigint, prevManaUsed: bigint, manaTarget: bigint): bigint {
+  const sum = prevExcessMana + prevManaUsed;
+  return sum > manaTarget ? sum - manaTarget : 0n;
+}
+
+/** Computes the congestion multiplier from excess mana (1e9 = no congestion). */
+export function computeCongestionMultiplier(excessMana: bigint, manaTarget: bigint): bigint {
+  const denominator = (manaTarget * MAGIC_CONGESTION_VALUE_MULTIPLIER) / MAGIC_CONGESTION_VALUE_DIVISOR;
+  const cappedNumerator = excessMana < denominator * 100n ? excessMana : denominator * 100n;
+  return fakeExponential(MINIMUM_CONGESTION_MULTIPLIER, cappedNumerator, denominator);
+}
+
+/** Ceiling division for positive bigints. */
+function ceilDiv(a: bigint, b: bigint): bigint {
+  return (a + b - 1n) / b;
+}
+
+/** Converts an ETH value to fee asset value using ethPerFeeAsset (1e12 precision). */
+function toFeeAsset(ethValue: bigint, ethPerFeeAsset: bigint): bigint {
+  if (ethPerFeeAsset === 0n) {
+    return 0n;
+  }
+  return ceilDiv(ethValue * ETH_PER_FEE_ASSET_PRECISION, ethPerFeeAsset);
+}
+
+/**
+ * Computes the full mana min fee (sequencer + prover + congestion) in fee asset terms.
+ * Mirrors FeeLib.getManaMinFeeComponentsAt + summedMinFee.
+ */
+export function computeManaMinFee(params: ManaMinFeeParams): bigint {
+  const { l1BaseFee, l1BlobFee, manaTarget, epochDuration, provingCostPerManaEth, excessMana, ethPerFeeAsset } = params;
+
+  if (manaTarget === 0n) {
+    return 0n;
+  }
+
+  // Sequencer cost per mana (in ETH)
+  const ethUsed = L1_GAS_PER_CHECKPOINT_PROPOSED * l1BaseFee + BLOBS_PER_CHECKPOINT * BLOB_GAS_PER_BLOB * l1BlobFee;
+  const sequencerCostEth = ceilDiv(ethUsed, manaTarget);
+
+  // Prover cost per mana (in ETH): L1 verification gas + governance-set proving cost
+  const proverCostEth =
+    ceilDiv(ceilDiv(L1_GAS_PER_EPOCH_VERIFIED * l1BaseFee, epochDuration), manaTarget) + provingCostPerManaEth;
+
+  // Total base cost in ETH (congestion is computed on this)
+  const totalEth = sequencerCostEth + proverCostEth;
+
+  // Congestion multiplier and cost (in ETH)
+  const congestionMul = computeCongestionMultiplier(excessMana, manaTarget);
+  const congestionCostEth = (totalEth * congestionMul) / MINIMUM_CONGESTION_MULTIPLIER - totalEth;
+
+  // Convert all components to fee asset
+  const clampedEthPerFeeAsset = ethPerFeeAsset < MIN_ETH_PER_FEE_ASSET ? MIN_ETH_PER_FEE_ASSET : ethPerFeeAsset;
+  const sequencerCost = toFeeAsset(sequencerCostEth, clampedEthPerFeeAsset);
+  const proverCost = toFeeAsset(proverCostEth, clampedEthPerFeeAsset);
+  const congestionCost = toFeeAsset(congestionCostEth, clampedEthPerFeeAsset);
+
+  const total = sequencerCost + proverCost + congestionCost;
+
+  // Cap at uint128 max (matching FeeLib.summedMinFee)
+  const UINT128_MAX = (1n << 128n) - 1n;
+  return total < UINT128_MAX ? total : UINT128_MAX;
+}

package/src/gas/gas_fees.ts

@@ -15,6 +15,17 @@ import { z } from 'zod';
 import type { UInt128 } from '../types/shared.js';
 import type { GasDimensions } from './gas.js';
 
+/**
+ * Multiplies a bigint by a non-integer scalar and returns the ceiling of the result.
+ * Avoids converting the bigint to Number (which loses precision above 2^53) by instead
+ * scaling the scalar into a bigint rational and performing ceiling division.
+ */
+function bigintMulCeil(value: bigint, scalar: number): bigint {
+  const SCALE = 1_000_000_000_000n; // 1e12
+  const scaledScalar = BigInt(Math.round(scalar * 1e12));
+  return (value * scaledScalar + SCALE - 1n) / SCALE;
+}
+
 /** Gas prices for each dimension. */
 export class GasFees {
   public readonly feePerDaGas: UInt128;
@@ -60,10 +71,7 @@ export class GasFees {
       const s = BigInt(scalar);
       return new GasFees(this.feePerDaGas * s, this.feePerL2Gas * s);
     } else {
-      return new GasFees(
-        BigInt(Math.ceil(Number(this.feePerDaGas) * scalar)),
-        BigInt(Math.ceil(Number(this.feePerL2Gas) * scalar)),
-      );
+      return new GasFees(bigintMulCeil(this.feePerDaGas, scalar), bigintMulCeil(this.feePerL2Gas, scalar));
     }
   }
 

package/src/gas/gas_settings.ts

@@ -1,10 +1,4 @@
-import {
-  DEFAULT_DA_GAS_LIMIT,
-  DEFAULT_L2_GAS_LIMIT,
-  DEFAULT_TEARDOWN_DA_GAS_LIMIT,
-  DEFAULT_TEARDOWN_L2_GAS_LIMIT,
-  GAS_SETTINGS_LENGTH,
-} from '@aztec/constants';
+import { GAS_SETTINGS_LENGTH, MAX_PROCESSABLE_DA_GAS_PER_CHECKPOINT, MAX_PROCESSABLE_L2_GAS } from '@aztec/constants';
 import { Fr } from '@aztec/foundation/curves/bn254';
 import { BufferReader, FieldReader, serializeToBuffer, serializeToFields } from '@aztec/foundation/serialize';
 import type { FieldsOf } from '@aztec/foundation/types';
@@ -14,6 +8,21 @@ import { z } from 'zod';
 import { Gas, GasDimensions } from './gas.js';
 import { GasFees } from './gas_fees.js';
 
+/** Approximate max DA gas limit. Arbitrary, assuming 4 blocks per checkpoint — users should use gas estimation. */
+export const APPROXIMATE_MAX_DA_GAS_PER_BLOCK = Math.floor(MAX_PROCESSABLE_DA_GAS_PER_CHECKPOINT / 4);
+/** Fallback teardown L2 gas limit. Arbitrary — users should use gas estimation. */
+export const FALLBACK_TEARDOWN_L2_GAS_LIMIT = Math.floor(MAX_PROCESSABLE_L2_GAS / 8);
+/** Fallback teardown DA gas limit. Arbitrary — users should use gas estimation. */
+export const FALLBACK_TEARDOWN_DA_GAS_LIMIT = Math.floor(APPROXIMATE_MAX_DA_GAS_PER_BLOCK / 2);
+
+// For gas estimation, we use intentionally high limits above what the network can process,
+// so the simulation runs without hitting gas caps. Since teardown gas is counted towards total,
+// the total estimation limit is teardown + max processable.
+export const GAS_ESTIMATION_TEARDOWN_L2_GAS_LIMIT = MAX_PROCESSABLE_L2_GAS;
+export const GAS_ESTIMATION_L2_GAS_LIMIT = GAS_ESTIMATION_TEARDOWN_L2_GAS_LIMIT + MAX_PROCESSABLE_L2_GAS;
+export const GAS_ESTIMATION_TEARDOWN_DA_GAS_LIMIT = MAX_PROCESSABLE_DA_GAS_PER_CHECKPOINT;
+export const GAS_ESTIMATION_DA_GAS_LIMIT = GAS_ESTIMATION_TEARDOWN_DA_GAS_LIMIT + MAX_PROCESSABLE_DA_GAS_PER_CHECKPOINT;
+
 // docs:start:gas_settings_vars
 /** Gas usage and fees limits set by the transaction sender for different dimensions and phases. */
 export class GasSettings {
@@ -95,18 +104,62 @@ export class GasSettings {
     return new GasSettings(Gas.empty(), Gas.empty(), GasFees.empty(), GasFees.empty());
   }
 
-  /** Default gas settings to use when user has not provided them. Requires explicit max fees per gas. */
-  static default(overrides: {
+  /**
+   * Fills in gas limits high enough for transactions to be included in most cases.
+   * gasLimits is set to the maximum the protocol allows; since teardown gas is reserved
+   * from gasLimits during private execution (see gas_meter.nr), the effective gas available
+   * for app logic will be gasLimits - teardownGasLimits - privateOverhead.
+   * The DA gas limit is set to an approximate max per block assuming 4 blocks per checkpoint,
+   * since using the maximum per checkpoint would cause nodes to reject transactions.
+   * These values won't work if:
+   *  - Teardown consumes more than the arbitrarily assigned fallback limits
+   *  - The rest of the transaction consumes more than the remaining gas after teardown
+   *  - The DA gas limit is too low for the transaction, while still within the checkpoint limit
+   */
+  static fallback(overrides: {
+    gasLimits?: Gas;
+    teardownGasLimits?: Gas;
+    maxFeesPerGas: GasFees;
+    maxPriorityFeesPerGas?: GasFees;
+  }) {
+    return GasSettings.from({
+      gasLimits: overrides.gasLimits ?? {
+        l2Gas: MAX_PROCESSABLE_L2_GAS,
+        daGas: APPROXIMATE_MAX_DA_GAS_PER_BLOCK,
+      },
+      teardownGasLimits: overrides.teardownGasLimits ?? {
+        l2Gas: FALLBACK_TEARDOWN_L2_GAS_LIMIT,
+        daGas: FALLBACK_TEARDOWN_DA_GAS_LIMIT,
+      },
+      maxFeesPerGas: overrides.maxFeesPerGas,
+      maxPriorityFeesPerGas: overrides.maxPriorityFeesPerGas ?? GasFees.empty(),
+    });
+  }
+
+  /**
+   * Gas settings for simulation/estimation only.
+   * Since teardown gas is reserved upfront from gasLimits during private execution (see gas_meter.nr),
+   * the effective gas available for app logic is gasLimits - teardownGasLimits - privateOverhead.
+   * To ensure estimation never hits gas caps, we set both limits above what the protocol allows:
+   * teardown gets MAX_PROCESSABLE and gasLimits gets teardown + MAX_PROCESSABLE, so the full
+   * processable amount remains available for each phase independently. To be used in conjunction
+   * with skipTxValidation: true during public simulation, or the node would reject the transaction
+   * outright due to gas limits being above protocol max.
+   */
+  static forEstimation(overrides: {
     gasLimits?: Gas;
     teardownGasLimits?: Gas;
     maxFeesPerGas: GasFees;
     maxPriorityFeesPerGas?: GasFees;
   }) {
     return GasSettings.from({
-      gasLimits: overrides.gasLimits ?? { l2Gas: DEFAULT_L2_GAS_LIMIT, daGas: DEFAULT_DA_GAS_LIMIT },
+      gasLimits: overrides.gasLimits ?? {
+        l2Gas: GAS_ESTIMATION_L2_GAS_LIMIT,
+        daGas: GAS_ESTIMATION_DA_GAS_LIMIT,
+      },
       teardownGasLimits: overrides.teardownGasLimits ?? {
-        l2Gas: DEFAULT_TEARDOWN_L2_GAS_LIMIT,
-        daGas: DEFAULT_TEARDOWN_DA_GAS_LIMIT,
+        l2Gas: GAS_ESTIMATION_TEARDOWN_L2_GAS_LIMIT,
+        daGas: GAS_ESTIMATION_TEARDOWN_DA_GAS_LIMIT,
       },
       maxFeesPerGas: overrides.maxFeesPerGas,
       maxPriorityFeesPerGas: overrides.maxPriorityFeesPerGas ?? GasFees.empty(),

package/src/gas/index.ts

@@ -1,3 +1,4 @@
+export * from './fee_math.js';
 export * from './gas.js';
 export * from './gas_fees.js';
 export * from './gas_settings.js';

package/src/ha-signing/index.ts

@@ -16,12 +16,14 @@ export {
 } from './local_config.js';
 export {
   DutyType,
+  type AttestationSigningContext,
   type BlockProposalSigningContext,
+  type CheckpointProposalSigningContext,
   type HAProtectedSigningContext,
   type NoHAProtectionSigningContext,
-  type OtherSigningContext,
   type SigningContext,
   type VoteSigningContext,
   getBlockNumberFromSigningContext,
+  getCheckpointNumberFromSigningContext,
   isHAProtectedContext,
 } from './types.js';

package/src/ha-signing/local_config.ts

@@ -26,7 +26,7 @@ export const localSignerConfigMappings: ConfigMappingsType<LocalSignerConfig> =
     env: 'SIGNING_PROTECTION_MAP_SIZE_KB',
     description:
       'Maximum size of the local signing-protection LMDB store in KB. Overwrites the general dataStoreMapSizeKb.',
-    parseEnv: (val: string | undefined) => (val ? +val : undefined),
+    parseEnv: (val: string) => +val,
   },
 };
 

package/src/ha-signing/types.ts

@@ -1,6 +1,6 @@
 import {
   BlockNumber,
-  type CheckpointNumber,
+  CheckpointNumber,
   type IndexWithinCheckpoint,
   type SlotNumber,
 } from '@aztec/foundation/branded-types';
@@ -20,40 +20,40 @@ export enum DutyType {
 }
 
 /**
- * Base context for signing operations
+ * Signing context for block proposals.
+ * Includes both the block number and the checkpoint number the block belongs to.
  */
-interface BaseSigningContext {
-  /** Slot number for this duty */
+export interface BlockProposalSigningContext {
   slot: SlotNumber;
-  /**
-   * Block or checkpoint number for this duty.
-   * For block proposals, this is the block number.
-   * For checkpoint proposals, this is the checkpoint number.
-   */
-  blockNumber: BlockNumber | CheckpointNumber;
+  blockNumber: BlockNumber;
+  checkpointNumber: CheckpointNumber;
+  /** Block index within checkpoint (0, 1, 2...). Required for block proposals. */
+  blockIndexWithinCheckpoint: IndexWithinCheckpoint;
+  dutyType: DutyType.BLOCK_PROPOSAL;
 }
 
 /**
- * Signing context for block proposals.
- * blockIndexWithinCheckpoint is REQUIRED and must be >= 0.
+ * Signing context for checkpoint proposals.
+ * Includes the checkpoint number being proposed, but not a block number.
  */
-export interface BlockProposalSigningContext extends BaseSigningContext {
-  /** Block index within checkpoint (0, 1, 2...). Required for block proposals. */
-  blockIndexWithinCheckpoint: IndexWithinCheckpoint;
-  dutyType: DutyType.BLOCK_PROPOSAL;
+export interface CheckpointProposalSigningContext {
+  slot: SlotNumber;
+  checkpointNumber: CheckpointNumber;
+  dutyType: DutyType.CHECKPOINT_PROPOSAL;
 }
 
 /**
- * Signing context for non-block-proposal duties that require HA protection.
- * blockIndexWithinCheckpoint is not applicable (internally always -1).
+ * Signing context for attestation duties (checkpoint attestations).
+ * Includes the checkpoint number when available (from proposal validation).
  */
-export interface OtherSigningContext extends BaseSigningContext {
-  dutyType: DutyType.CHECKPOINT_PROPOSAL | DutyType.ATTESTATION | DutyType.ATTESTATIONS_AND_SIGNERS;
+export interface AttestationSigningContext {
+  slot: SlotNumber;
+  checkpointNumber: CheckpointNumber;
+  dutyType: DutyType.ATTESTATION | DutyType.ATTESTATIONS_AND_SIGNERS;
 }
 
 /**
  * Signing context for governance/slashing votes which only need slot for HA protection.
- * blockNumber is not applicable (internally always 0).
  */
 export interface VoteSigningContext {
   slot: SlotNumber;
@@ -69,18 +69,23 @@ export interface NoHAProtectionSigningContext {
 }
 
 /**
- * Signing contexts that require HA protection (excludes AUTH_REQUEST).
+ * Signing contexts that require HA protection (excludes AUTH_REQUEST and TXS).
  * Used by the HA signer's signWithProtection method.
  */
-export type HAProtectedSigningContext = BlockProposalSigningContext | OtherSigningContext | VoteSigningContext;
+export type HAProtectedSigningContext =
+  | BlockProposalSigningContext
+  | CheckpointProposalSigningContext
+  | AttestationSigningContext
+  | VoteSigningContext;
 
 /**
  * Context required for slashing protection during signing operations.
  * Uses discriminated union to enforce type safety:
- * - BLOCK_PROPOSAL duties MUST have blockIndexWithinCheckpoint >= 0
- * - Other duty types do NOT have blockIndexWithinCheckpoint (internally -1)
- * - Vote duties only need slot (blockNumber is internally 0)
- * - AUTH_REQUEST and TXS duties don't need slot/blockNumber (no HA protection needed)
+ * - BLOCK_PROPOSAL duties have blockNumber, checkpointNumber, and blockIndexWithinCheckpoint
+ * - CHECKPOINT_PROPOSAL duties have checkpointNumber
+ * - ATTESTATION/ATTESTATIONS_AND_SIGNERS duties have only slot
+ * - Vote duties have only slot
+ * - AUTH_REQUEST and TXS duties don't need HA protection
  */
 export type SigningContext = HAProtectedSigningContext | NoHAProtectionSigningContext;
 
@@ -94,19 +99,28 @@ export function isHAProtectedContext(context: SigningContext): context is HAProt
 
 /**
  * Gets the block number from a signing context.
- * - Vote duties (GOVERNANCE_VOTE, SLASHING_VOTE): returns BlockNumber(0)
- * - Other duties: returns the blockNumber from the context
+ * Only BLOCK_PROPOSAL duties carry a block number; all others return BlockNumber(0).
  */
-export function getBlockNumberFromSigningContext(context: HAProtectedSigningContext): BlockNumber | CheckpointNumber {
-  // Check for duty types that have blockNumber
+export function getBlockNumberFromSigningContext(context: HAProtectedSigningContext): BlockNumber {
+  if (context.dutyType === DutyType.BLOCK_PROPOSAL) {
+    return context.blockNumber;
+  }
+  return BlockNumber(0);
+}
+
+/**
+ * Gets the checkpoint number from a signing context.
+ * BLOCK_PROPOSAL, CHECKPOINT_PROPOSAL, ATTESTATION, and ATTESTATIONS_AND_SIGNERS duties carry a checkpoint number;
+ * vote duties return CheckpointNumber(0).
+ */
+export function getCheckpointNumberFromSigningContext(context: HAProtectedSigningContext): CheckpointNumber {
   if (
     context.dutyType === DutyType.BLOCK_PROPOSAL ||
     context.dutyType === DutyType.CHECKPOINT_PROPOSAL ||
     context.dutyType === DutyType.ATTESTATION ||
     context.dutyType === DutyType.ATTESTATIONS_AND_SIGNERS
   ) {
-    return context.blockNumber;
+    return context.checkpointNumber;
   }
-  // Vote duties (GOVERNANCE_VOTE, SLASHING_VOTE) don't have blockNumber
-  return BlockNumber(0);
+  return CheckpointNumber(0);
 }

package/src/interfaces/aztec-node-admin.ts

@@ -3,7 +3,8 @@ import { createSafeJsonRpcClient, defaultFetch } from '@aztec/foundation/json-rp
 import { z } from 'zod';
 
 import type { ApiSchemaFor } from '../schemas/schemas.js';
-import { type Offense, OffenseSchema, type SlashPayloadRound, SlashPayloadRoundSchema } from '../slashing/index.js';
+import { optional } from '../schemas/schemas.js';
+import { type Offense, OffenseSchema } from '../slashing/index.js';
 import { type ComponentsVersions, getVersioningResponseHandler } from '../versioning/index.js';
 import { type ArchiverSpecificConfig, ArchiverSpecificConfigSchema } from './archiver.js';
 import { type SequencerConfig, SequencerConfigSchema } from './configs.js';
@@ -36,8 +37,9 @@ export interface AztecNodeAdmin {
    * Pauses syncing and rolls back the database to the target L2 block number.
    * @param targetBlockNumber - The block number to roll back to.
    * @param force - If true, clears the world state db and p2p dbs if rolling back to behind the finalized block.
+   * @param resumeSync - If true (default), resumes archiver and world state sync after rollback.
    */
-  rollbackTo(targetBlockNumber: number, force?: boolean): Promise<void>;
+  rollbackTo(targetBlockNumber: number, force?: boolean, resumeSync?: boolean): Promise<void>;
 
   /** Pauses archiver and world state syncing. */
   pauseSync(): Promise<void>;
@@ -45,9 +47,6 @@ export interface AztecNodeAdmin {
   /** Resumes archiver and world state syncing. */
   resumeSync(): Promise<void>;
 
-  /** Returns all monitored payloads by the slasher for the current round. */
-  getSlashPayloads(): Promise<SlashPayloadRound[]>;
-
   /** Returns all offenses applicable for the given round. */
   getSlashOffenses(round: bigint | 'all' | 'current'): Promise<Offense[]>;
 
@@ -100,10 +99,9 @@ export const AztecNodeAdminApiSchema: ApiSchemaFor<AztecNodeAdmin> = {
   getConfig: z.function().returns(AztecNodeAdminConfigSchema),
   setConfig: z.function().args(AztecNodeAdminConfigSchema.partial()).returns(z.void()),
   startSnapshotUpload: z.function().args(z.string()).returns(z.void()),
-  rollbackTo: z.function().args(z.number()).returns(z.void()),
+  rollbackTo: z.function().args(z.number(), optional(z.boolean()), optional(z.boolean())).returns(z.void()),
   pauseSync: z.function().returns(z.void()),
   resumeSync: z.function().returns(z.void()),
-  getSlashPayloads: z.function().returns(z.array(SlashPayloadRoundSchema)),
   getSlashOffenses: z
     .function()
     .args(z.union([z.bigint(), z.literal('all'), z.literal('current')]))

package/src/interfaces/aztec-node-debug.ts

@@ -0,0 +1,40 @@
+import { createSafeJsonRpcClient, defaultFetch } from '@aztec/foundation/json-rpc/client';
+
+import { z } from 'zod';
+
+import type { ApiSchemaFor } from '../schemas/schemas.js';
+import { type ComponentsVersions, getVersioningResponseHandler } from '../versioning/index.js';
+
+/**
+ * Debug interface for Aztec node available in sandbox/local-network mode.
+ */
+export interface AztecNodeDebug {
+  /**
+   * Triggers the sequencer to produce an L2 block and waits for it to appear.
+   *
+   * **Precondition**: The current L2 slot must not already contain a block. Callers must ensure L1 time has been
+   * advanced to a slot with no existing block before calling this method (e.g. via `EthCheatCodes.warp()`).
+   * If the slot is already taken, the sequencer will fail to propose and this call will time out.
+   *
+   * @throws If no sequencer is running.
+   */
+  mineBlock(): Promise<void>;
+}
+
+export const AztecNodeDebugApiSchema: ApiSchemaFor<AztecNodeDebug> = {
+  mineBlock: z.function().returns(z.void()),
+};
+
+export function createAztecNodeDebugClient(
+  url: string,
+  versions: Partial<ComponentsVersions> = {},
+  fetch = defaultFetch,
+  apiKey?: string,
+): AztecNodeDebug {
+  return createSafeJsonRpcClient<AztecNodeDebug>(url, AztecNodeDebugApiSchema, {
+    namespaceMethods: 'nodeDebug',
+    fetch,
+    onResponse: getVersioningResponseHandler(versions),
+    ...(apiKey ? { extraHeaders: { 'x-api-key': apiKey } } : {}),
+  });
+}

package/src/interfaces/aztec-node.ts

@@ -37,6 +37,7 @@ import {
   type ProtocolContractAddresses,
   ProtocolContractAddressesSchema,
 } from '../contract/index.js';
+import { ManaUsageEstimate } from '../gas/fee_math.js';
 import { GasFees } from '../gas/gas_fees.js';
 import { SiloedTag, Tag, TxScopedL2Log } from '../logs/index.js';
 import { type LogFilter, LogFilterSchema } from '../logs/log_filter.js';
@@ -272,6 +273,15 @@ export interface AztecNode
    */
   getCurrentMinFees(): Promise<GasFees>;
 
+  /**
+   * Returns predicted min fees for the current slot and next N slots.
+   * Each entry accounts for the L1 gas oracle transition and congestion growth based on the
+   * given mana usage estimate. Defaults to target usage (steady state).
+   * @param manaUsage - Expected mana usage per checkpoint (none, target, or limit).
+   * @returns An array of GasFees, one per slot in the prediction window.
+   */
+  getPredictedMinFees(manaUsage?: ManaUsageEstimate): Promise<GasFees[]>;
+
   /**
    * Method to fetch the current max priority fee of txs in the mempool.
    * @returns The current max priority fees.
@@ -578,6 +588,11 @@ export const AztecNodeApiSchema: ApiSchemaFor<AztecNode> = {
 
   getCurrentMinFees: z.function().returns(GasFees.schema),
 
+  getPredictedMinFees: z
+    .function()
+    .args(optional(z.nativeEnum(ManaUsageEstimate)))
+    .returns(z.array(GasFees.schema)),
+
   getMaxPriorityFees: z.function().returns(GasFees.schema),
 
   getNodeVersion: z.function().returns(z.string()),

package/src/interfaces/client.ts

@@ -1,5 +1,6 @@
 export * from './aztec-node.js';
 export * from './aztec-node-admin.js';
+export * from './aztec-node-debug.js';
 export * from './private_kernel_prover.js';
 export * from './get_logs_response.js';
 export * from './api_limit.js';

package/src/interfaces/merkle_tree_operations.ts

@@ -3,6 +3,7 @@ import type { Fr } from '@aztec/foundation/curves/bn254';
 import { createLogger } from '@aztec/foundation/log';
 import { type IndexedTreeLeafPreimage, SiblingPath } from '@aztec/foundation/trees';
 
+import type { BlockHash } from '../block/block_hash.js';
 import type { MerkleTreeId, TreeHeights } from '../trees/merkle_tree_id.js';
 import type { NullifierLeaf } from '../trees/nullifier_leaf.js';
 import type { PublicDataTreeLeaf } from '../trees/public_data_leaf.js';
@@ -99,7 +100,7 @@ type LeafTypes = {
   [MerkleTreeId.NOTE_HASH_TREE]: Fr;
   [MerkleTreeId.PUBLIC_DATA_TREE]: Buffer;
   [MerkleTreeId.L1_TO_L2_MESSAGE_TREE]: Fr;
-  [MerkleTreeId.ARCHIVE]: Fr;
+  [MerkleTreeId.ARCHIVE]: BlockHash;
 };
 
 type LeafValueTypes = {
@@ -107,7 +108,7 @@ type LeafValueTypes = {
   [MerkleTreeId.NOTE_HASH_TREE]: Fr;
   [MerkleTreeId.PUBLIC_DATA_TREE]: PublicDataTreeLeaf;
   [MerkleTreeId.L1_TO_L2_MESSAGE_TREE]: Fr;
-  [MerkleTreeId.ARCHIVE]: Fr;
+  [MerkleTreeId.ARCHIVE]: BlockHash;
 };
 
 export type MerkleTreeLeafType<ID extends MerkleTreeId> = LeafTypes[ID];

package/src/interfaces/prover-client.ts

@@ -71,7 +71,7 @@ export const proverConfigMappings: ConfigMappingsType<ProverConfig> = {
   },
   proverId: {
     env: 'PROVER_ID',
-    parseEnv: (val?: string) => parseProverId(val),
+    parseEnv: (val: string) => parseProverId(val),
     description: 'Hex value that identifies the prover. Defaults to the address used for submitting proofs if not set.',
   },
   proverTestDelayType: {
@@ -117,10 +117,7 @@ export const proverConfigMappings: ConfigMappingsType<ProverConfig> = {
   },
 };
 
-function parseProverId(str?: string) {
-  if (!str) {
-    return undefined;
-  }
+function parseProverId(str: string) {
   return EthAddress.fromString(str);
 }
 

package/src/interfaces/slasher.ts

@@ -3,12 +3,8 @@ import { schemas, zodFor } from '@aztec/foundation/schemas';
 
 import { z } from 'zod';
 
-export type SlasherClientType = 'empire' | 'tally';
-
 export interface SlasherConfig {
   slashOverridePayload?: EthAddress;
-  slashMinPenaltyPercentage: number;
-  slashMaxPenaltyPercentage: number;
   slashSelfAllowed?: boolean; // Whether to allow slashes to own validators
   slashValidatorsAlways: EthAddress[]; // Array of validator addresses
   slashValidatorsNever: EthAddress[]; // Array of validator addresses
@@ -32,8 +28,6 @@ export interface SlasherConfig {
 export const SlasherConfigSchema = zodFor<SlasherConfig>()(
   z.object({
     slashOverridePayload: schemas.EthAddress.optional(),
-    slashMinPenaltyPercentage: z.number(),
-    slashMaxPenaltyPercentage: z.number(),
     slashValidatorsAlways: z.array(schemas.EthAddress),
     slashValidatorsNever: z.array(schemas.EthAddress),
     slashPrunePenalty: schemas.BigInt,