@aztec/p2p 4.0.0-devnet.2-patch.4 → 4.0.0-devnet.3-patch.1

package/src/config.ts

@@ -1,6 +1,7 @@
 import {
   type ConfigMappingsType,
   SecretValue,
+  bigintConfigHelper,
   booleanConfigHelper,
   getConfigFromMappings,
   getDefaultConfig,
@@ -38,7 +39,19 @@ export interface P2PConfig
     ChainConfig,
     TxCollectionConfig,
     TxFileStoreConfig,
-    Pick<SequencerConfig, 'blockDurationMs'> {
+    Pick<SequencerConfig, 'blockDurationMs' | 'expectedBlockProposalsPerSlot' | 'maxTxsPerBlock'> {
+  /** Maximum transactions per block for validation. Overrides maxTxsPerBlock for gossip validation when set. */
+  validateMaxTxsPerBlock?: number;
+
+  /** Maximum transactions per checkpoint for validation. Used as fallback for maxTxsPerBlock when that is not set. */
+  validateMaxTxsPerCheckpoint?: number;
+
+  /** Maximum L2 gas per block for validation. When set, txs exceeding this limit are rejected. */
+  validateMaxL2BlockGas?: number;
+
+  /** Maximum DA gas per block for validation. When set, txs exceeding this limit are rejected. */
+  validateMaxDABlockGas?: number;
+
   /** A flag dictating whether the P2P subsystem should be enabled. */
   p2pEnabled: boolean;
 
@@ -150,8 +163,8 @@ export interface P2PConfig
   /** The maximum possible size of the P2P DB in KB. Overwrites the general dataStoreMapSizeKb. */
   p2pStoreMapSizeKb?: number;
 
-  /** Which calls are allowed in the public setup phase of a tx. */
-  txPublicSetupAllowList: AllowedElement[];
+  /** Additional entries to extend the default setup allow list. */
+  txPublicSetupAllowListExtend: AllowedElement[];
 
   /** The maximum number of pending txs before evicting lower priority txs. */
   maxPendingTxCount: number;
@@ -193,11 +206,36 @@ export interface P2PConfig
 
   /** Minimum age (ms) a transaction must have been in the pool before it's eligible for block building. */
   minTxPoolAgeMs: number;
+
+  /** Minimum percentage fee increase required to replace an existing tx via RPC (0 = no bump). */
+  priceBumpPercentage: bigint;
 }
 
 export const DEFAULT_P2P_PORT = 40400;
 
 export const p2pConfigMappings: ConfigMappingsType<P2PConfig> = {
+  validateMaxTxsPerBlock: {
+    env: 'VALIDATOR_MAX_TX_PER_BLOCK',
+    description:
+      'Maximum transactions per block for validation. Overrides maxTxsPerBlock for gossip validation when set.',
+    parseEnv: (val: string) => (val ? parseInt(val, 10) : undefined),
+  },
+  validateMaxTxsPerCheckpoint: {
+    env: 'VALIDATOR_MAX_TX_PER_CHECKPOINT',
+    description:
+      'Maximum transactions per checkpoint for validation. Used as fallback for maxTxsPerBlock when that is not set.',
+    parseEnv: (val: string) => (val ? parseInt(val, 10) : undefined),
+  },
+  validateMaxL2BlockGas: {
+    env: 'VALIDATOR_MAX_L2_BLOCK_GAS',
+    description: 'Maximum L2 gas per block for validation. When set, txs exceeding this limit are rejected.',
+    parseEnv: (val: string) => (val ? parseInt(val, 10) : undefined),
+  },
+  validateMaxDABlockGas: {
+    env: 'VALIDATOR_MAX_DA_BLOCK_GAS',
+    description: 'Maximum DA gas per block for validation. When set, txs exceeding this limit are rejected.',
+    parseEnv: (val: string) => (val ? parseInt(val, 10) : undefined),
+  },
   p2pEnabled: {
     env: 'P2P_ENABLED',
     description: 'A flag dictating whether the P2P subsystem should be enabled.',
@@ -396,12 +434,13 @@ export const p2pConfigMappings: ConfigMappingsType<P2PConfig> = {
     parseEnv: (val: string | undefined) => (val ? +val : undefined),
     description: 'The maximum possible size of the P2P DB in KB. Overwrites the general dataStoreMapSizeKb.',
   },
-  txPublicSetupAllowList: {
+  txPublicSetupAllowListExtend: {
     env: 'TX_PUBLIC_SETUP_ALLOWLIST',
     parseEnv: (val: string) => parseAllowList(val),
-    description: 'The list of functions calls allowed to run in setup',
+    description:
+      'Additional entries to extend the default setup allow list. Format: I:address:selector[:flags],C:classId:selector[:flags]. Flags: os (onlySelf), rn (rejectNullMsgSender), cl=N (calldataLength), joined with +.',
     printDefault: () =>
-      'AuthRegistry, FeeJuice.increase_public_balance, Token.increase_public_balance, FPC.prepare_fee',
+      'Default: AuthRegistry._set_authorized, AuthRegistry.set_authorized, FeeJuice._increase_public_balance',
   },
   maxPendingTxCount: {
     env: 'P2P_MAX_PENDING_TX_COUNT',
@@ -472,6 +511,12 @@ export const p2pConfigMappings: ConfigMappingsType<P2PConfig> = {
     description: 'Minimum age (ms) a transaction must have been in the pool before it is eligible for block building.',
     ...numberConfigHelper(2_000),
   },
+  priceBumpPercentage: {
+    env: 'P2P_RPC_PRICE_BUMP_PERCENTAGE',
+    description:
+      'Minimum percentage fee increase required to replace an existing tx via RPC. Even at 0%, replacement still requires paying at least 1 unit more.',
+    ...bigintConfigHelper(10n),
+  },
   ...sharedSequencerConfigMappings,
   ...p2pReqRespConfigMappings,
   ...batchTxRequesterConfigMappings,
@@ -529,13 +574,44 @@ export const bootnodeConfigMappings = pickConfigMappings(
   bootnodeConfigKeys,
 );
 
+/**
+ * Parses a `+`-separated flags string into validation properties for an allow list entry.
+ * Supported flags: `os` (onlySelf), `rn` (rejectNullMsgSender), `cl=N` (calldataLength).
+ */
+function parseFlags(
+  flags: string,
+  entry: string,
+): { onlySelf?: boolean; rejectNullMsgSender?: boolean; calldataLength?: number } {
+  const result: { onlySelf?: boolean; rejectNullMsgSender?: boolean; calldataLength?: number } = {};
+  for (const flag of flags.split('+')) {
+    if (flag === 'os') {
+      result.onlySelf = true;
+    } else if (flag === 'rn') {
+      result.rejectNullMsgSender = true;
+    } else if (flag.startsWith('cl=')) {
+      const n = parseInt(flag.slice(3), 10);
+      if (isNaN(n) || n < 0) {
+        throw new Error(
+          `Invalid allow list entry "${entry}": invalid calldataLength in flag "${flag}". Expected a non-negative integer.`,
+        );
+      }
+      result.calldataLength = n;
+    } else {
+      throw new Error(`Invalid allow list entry "${entry}": unknown flag "${flag}". Supported flags: os, rn, cl=N.`);
+    }
+  }
+  return result;
+}
+
 /**
  * Parses a string to a list of allowed elements.
- * Each encoded is expected to be of one of the following formats
- * `I:${address}`
- * `I:${address}:${selector}`
- * `C:${classId}`
- * `C:${classId}:${selector}`
+ * Each entry is expected to be of one of the following formats:
+ * `I:${address}:${selector}` — instance (contract address) with function selector
+ * `C:${classId}:${selector}` — class with function selector
+ *
+ * An optional flags segment can be appended after the selector:
+ * `I:${address}:${selector}:${flags}` or `C:${classId}:${selector}:${flags}`
+ * where flags is a `+`-separated list of: `os` (onlySelf), `rn` (rejectNullMsgSender), `cl=N` (calldataLength).
  *
  * @param value The string to parse
  * @returns A list of allowed elements
@@ -548,31 +624,37 @@ export function parseAllowList(value: string): AllowedElement[] {
   }
 
   for (const val of value.split(',')) {
-    const [typeString, identifierString, selectorString] = val.split(':');
-    const selector = selectorString !== undefined ? FunctionSelector.fromString(selectorString) : undefined;
+    const trimmed = val.trim();
+    if (!trimmed) {
+      continue;
+    }
+    const [typeString, identifierString, selectorString, flagsString] = trimmed.split(':');
+
+    if (!selectorString) {
+      throw new Error(
+        `Invalid allow list entry "${trimmed}": selector is required. Expected format: I:address:selector or C:classId:selector`,
+      );
+    }
+
+    const selector = FunctionSelector.fromString(selectorString);
+    const flags = flagsString ? parseFlags(flagsString, trimmed) : {};
 
     if (typeString === 'I') {
-      if (selector) {
-        entries.push({
-          address: AztecAddress.fromString(identifierString),
-          selector,
-        });
-      } else {
-        entries.push({
-          address: AztecAddress.fromString(identifierString),
-        });
-      }
+      entries.push({
+        address: AztecAddress.fromString(identifierString),
+        selector,
+        ...flags,
+      });
     } else if (typeString === 'C') {
-      if (selector) {
-        entries.push({
-          classId: Fr.fromHexString(identifierString),
-          selector,
-        });
-      } else {
-        entries.push({
-          classId: Fr.fromHexString(identifierString),
-        });
-      }
+      entries.push({
+        classId: Fr.fromHexString(identifierString),
+        selector,
+        ...flags,
+      });
+    } else {
+      throw new Error(
+        `Invalid allow list entry "${trimmed}": unknown type "${typeString}". Expected "I" (instance) or "C" (class).`,
+      );
     }
   }
 

package/src/mem_pools/tx_pool/eviction/fee_payer_balance_eviction_rule.ts

@@ -32,10 +32,11 @@ export class FeePayerBalanceEvictionRule implements EvictionRule {
 
       if (context.event === EvictionEvent.BLOCK_MINED) {
         const blockNumber = context.block.getBlockNumber();
+        const blockHash = await context.block.hash();
         // Ensure world state is synced to this block before accessing the snapshot.
         // This handles the race where a block is added to the archiver
         // but the world state hasn't synced it yet.
-        await this.worldState.syncImmediate(blockNumber);
+        await this.worldState.syncImmediate(blockNumber, blockHash);
         return await this.evictForFeePayers(context.feePayers, this.worldState.getSnapshot(blockNumber), txPool);
       }
 

package/src/mem_pools/tx_pool/priority.ts

@@ -1,3 +1,4 @@
+import { minBigint } from '@aztec/foundation/bigint';
 import { Buffer32 } from '@aztec/foundation/buffer';
 import type { Tx } from '@aztec/stdlib/tx';
 
@@ -11,10 +12,9 @@ export function getPendingTxPriority(tx: Tx): string {
 }
 
 /**
- * Returns the priority of a tx.
+ * Returns the priority of a tx based on the L2 priority fee only, capped by the max fees per gas.
  */
 export function getTxPriorityFee(tx: Tx): bigint {
-  const priorityFees = tx.getGasSettings().maxPriorityFeesPerGas;
-  const totalFees = priorityFees.feePerDaGas + priorityFees.feePerL2Gas;
-  return totalFees;
+  const { maxPriorityFeesPerGas: priorityFees, maxFeesPerGas } = tx.getGasSettings();
+  return minBigint(maxFeesPerGas.feePerL2Gas, priorityFees.feePerL2Gas);
 }

package/src/mem_pools/tx_pool/tx_pool_test_suite.ts

@@ -204,7 +204,9 @@ export function describeTxPool(getTxPool: () => TxPool) {
 
   it('returns pending tx hashes sorted by priority', async () => {
     const withPriorityFee = (tx: Tx, fee: number) => {
-      unfreeze(tx.data.constants.txContext.gasSettings).maxPriorityFeesPerGas = new GasFees(fee, fee);
+      const gs = unfreeze(tx.data.constants.txContext.gasSettings);
+      gs.maxPriorityFeesPerGas = new GasFees(fee, fee);
+      gs.maxFeesPerGas = new GasFees(fee, fee);
       return tx;
     };
 

package/src/mem_pools/tx_pool_v2/README.md

@@ -158,7 +158,7 @@ Checked before adding a transaction to the pending pool:
 
 | Rule | Purpose |
 |------|---------|
-| `NullifierConflictRule` | Handles transactions with conflicting nullifiers. Higher priority tx wins. |
+| `NullifierConflictRule` | Handles transactions with conflicting nullifiers. Higher priority tx wins. For RPC submissions, a configurable price bump percentage is required. |
 | `FeePayerBalancePreAddRule` | Ensures fee payer has sufficient balance for all their pending txs. |
 | `LowPriorityPreAddRule` | Rejects txs when pool is full and new tx has lowest priority. |
 
@@ -233,6 +233,14 @@ await pool.updateConfig({
 });
 ```
 
+### Price Bump (RPC Transaction Replacement)
+
+When a transaction is submitted via RPC and clashes on nullifiers with an existing pool transaction, the incoming tx must pay at least `priceBumpPercentage`% more in priority fee (i.e. `>= existingFee + existingFee * bump / 100`) to replace it. This prevents spam via small fee increments. The same bump applies when the pool is full and the incoming tx needs to evict the lowest-priority tx.
+
+- **Env var**: `P2P_RPC_PRICE_BUMP_PERCENTAGE` (default: 10)
+- **Scope**: RPC submissions only. P2P gossip uses `comparePriority` (fee + hash tiebreaker) with no bump.
+- Even with a 0% bump, a replacement tx must pay at least 1 unit more than the existing fee.
+
 ## Return Values
 
 ### AddTxsResult

package/src/mem_pools/tx_pool_v2/eviction/fee_payer_balance_eviction_rule.ts

@@ -29,12 +29,13 @@ export class FeePayerBalanceEvictionRule implements EvictionRule {
 
       if (context.event === EvictionEvent.BLOCK_MINED) {
         const blockNumber = context.block.getBlockNumber();
-        await this.worldState.syncImmediate(blockNumber);
+        const blockHash = await context.block.hash();
+        await this.worldState.syncImmediate(blockNumber, blockHash);
         return await this.evictForFeePayers(context.feePayers, this.worldState.getSnapshot(blockNumber), pool);
       }
 
       if (context.event === EvictionEvent.CHAIN_PRUNED) {
-        await this.worldState.syncImmediate(context.blockNumber);
+        await this.worldState.syncImmediate();
         const feePayers = pool.getPendingFeePayers();
         return await this.evictForFeePayers(feePayers, this.worldState.getSnapshot(context.blockNumber), pool);
       }

package/src/mem_pools/tx_pool_v2/eviction/fee_payer_balance_pre_add_rule.ts

@@ -35,6 +35,7 @@ export class FeePayerBalancePreAddRule implements PreAddRule {
     // Create combined list with incoming tx
     const allTxs: Array<{
       txHash: string;
+      txHashBigInt: bigint;
       priorityFee: bigint;
       feeLimit: bigint;
       claimAmount: bigint;
@@ -42,6 +43,7 @@ export class FeePayerBalancePreAddRule implements PreAddRule {
     }> = [
       ...existingTxs.map(t => ({
         txHash: t.txHash,
+        txHashBigInt: t.txHashBigInt,
         priorityFee: t.priorityFee,
         feeLimit: t.feeLimit,
         claimAmount: t.claimAmount,
@@ -49,6 +51,7 @@ export class FeePayerBalancePreAddRule implements PreAddRule {
       })),
       {
         txHash: incomingMeta.txHash,
+        txHashBigInt: incomingMeta.txHashBigInt,
         priorityFee: incomingMeta.priorityFee,
         feeLimit: incomingMeta.feeLimit,
         claimAmount: incomingMeta.claimAmount,

package/src/mem_pools/tx_pool_v2/eviction/interfaces.ts

@@ -100,7 +100,15 @@ export type TxPoolRejectionError =
       availableBalance: bigint;
       feeLimit: bigint;
     }
-  | { code: typeof TxPoolRejectionCode.NULLIFIER_CONFLICT; message: string; conflictingTxHash: string }
+  | {
+      code: typeof TxPoolRejectionCode.NULLIFIER_CONFLICT;
+      message: string;
+      conflictingTxHash: string;
+      /** Minimum fee needed to replace the conflicting tx (only set when price bump applies). */
+      minimumPriceBumpFee?: bigint;
+      /** Incoming tx's priority fee. */
+      txPriorityFee?: bigint;
+    }
   | { code: typeof TxPoolRejectionCode.INTERNAL_ERROR; message: string };
 
 /**
@@ -121,6 +129,8 @@ export interface PreAddResult {
 export interface PreAddContext {
   /** If true, compare priority fee only (no tx hash tiebreaker). Used for RPC submissions. */
   feeComparisonOnly?: boolean;
+  /** Percentage-based price bump required for tx replacement. Only set for RPC submissions. */
+  priceBumpPercentage?: bigint;
 }
 
 /**

package/src/mem_pools/tx_pool_v2/eviction/invalid_txs_after_reorg_rule.ts

@@ -45,8 +45,8 @@ export class InvalidTxsAfterReorgRule implements EvictionRule {
         txsByBlockHash.get(blockHashStr)!.push(meta.txHash);
       }
 
-      // Ensure world state is synced to this block before accessing the snapshot
-      await this.worldState.syncImmediate(context.blockNumber);
+      // Sync without a block number to ensure the world state processes the prune event.
+      await this.worldState.syncImmediate();
       const db = this.worldState.getSnapshot(context.blockNumber);
 
       // Check which blocks exist in the archive

package/src/mem_pools/tx_pool_v2/eviction/low_priority_eviction_rule.ts

@@ -5,7 +5,7 @@ import { EvictionEvent } from './interfaces.js';
 
 /**
  * Eviction rule that removes low-priority transactions when the pool exceeds configured limits.
- * Only triggers on TXS_ADDED events.
+ * Triggers on TXS_ADDED and CHAIN_PRUNED events.
  */
 export class LowPriorityEvictionRule implements EvictionRule {
   public readonly name = 'LowPriorityEviction';
@@ -18,7 +18,7 @@ export class LowPriorityEvictionRule implements EvictionRule {
   }
 
   async evict(context: EvictionContext, pool: PoolOperations): Promise<EvictionResult> {
-    if (context.event !== EvictionEvent.TXS_ADDED) {
+    if (context.event !== EvictionEvent.TXS_ADDED && context.event !== EvictionEvent.CHAIN_PRUNED) {
       return {
         reason: 'low_priority',
         success: true,
@@ -51,15 +51,19 @@ export class LowPriorityEvictionRule implements EvictionRule {
       this.log.info(`Evicting low priority txs. Pending tx count above limit: ${currentTxCount} > ${this.maxPoolSize}`);
       const numberToEvict = currentTxCount - this.maxPoolSize;
       const txsToEvict = pool.getLowestPriorityPending(numberToEvict);
-      const toEvictSet = new Set(txsToEvict);
-      const numNewTxsEvicted = context.newTxHashes.filter(newTxHash => toEvictSet.has(newTxHash)).length;
 
       if (txsToEvict.length > 0) {
-        this.log.info(`Evicted ${txsToEvict.length} low priority txs, including ${numNewTxsEvicted} newly added txs`);
+        if (context.event === EvictionEvent.TXS_ADDED) {
+          const toEvictSet = new Set(txsToEvict);
+          const numNewTxsEvicted = context.newTxHashes.filter(newTxHash => toEvictSet.has(newTxHash)).length;
+          this.log.info(`Evicted ${txsToEvict.length} low priority txs, including ${numNewTxsEvicted} newly added txs`);
+        } else {
+          this.log.info(`Evicted ${txsToEvict.length} low priority txs after chain prune`);
+        }
         await pool.deleteTxs(txsToEvict, this.name);
       }
 
-      this.log.debug(`Evicted ${txsToEvict.length} low priority txs, including ${numNewTxsEvicted} newly added txs`, {
+      this.log.debug(`Evicted ${txsToEvict.length} low priority txs`, {
         txHashes: txsToEvict,
       });
 

package/src/mem_pools/tx_pool_v2/eviction/low_priority_pre_add_rule.ts

@@ -1,6 +1,6 @@
 import { createLogger } from '@aztec/foundation/log';
 
-import { type TxMetaData, comparePriority } from '../tx_metadata.js';
+import { type TxMetaData, comparePriority, getMinimumPriceBumpFee } from '../tx_metadata.js';
 import {
   type EvictionConfig,
   type PreAddContext,
@@ -48,10 +48,14 @@ export class LowPriorityPreAddRule implements PreAddRule {
     }
 
     // Compare incoming tx against lowest priority tx.
-    // feeOnly mode (RPC): use strict fee comparison only — avoids churn from hash ordering
-    // Default (gossip): use full comparePriority (fee + tx hash tiebreaker) for determinism
+    // feeOnly mode (RPC): use strict fee comparison only — avoids churn from hash ordering.
+    // When price bump is also set, require the bumped fee threshold.
+    // Default (gossip): use full comparePriority (fee + tx hash tiebreaker) for determinism.
     const isHigherPriority = context?.feeComparisonOnly
-      ? incomingMeta.priorityFee > lowestPriorityMeta.priorityFee
+      ? context.priceBumpPercentage !== undefined
+        ? incomingMeta.priorityFee >=
+          getMinimumPriceBumpFee(lowestPriorityMeta.priorityFee, context.priceBumpPercentage)
+        : incomingMeta.priorityFee > lowestPriorityMeta.priorityFee
       : comparePriority(incomingMeta, lowestPriorityMeta) > 0;
 
     if (isHigherPriority) {
@@ -66,6 +70,11 @@ export class LowPriorityPreAddRule implements PreAddRule {
     }
 
     // Incoming tx has equal or lower priority - ignore it (it would be evicted anyway)
+    const minimumFee =
+      context?.feeComparisonOnly && context.priceBumpPercentage !== undefined
+        ? getMinimumPriceBumpFee(lowestPriorityMeta.priorityFee, context.priceBumpPercentage)
+        : lowestPriorityMeta.priorityFee + 1n;
+
     this.log.debug(
       `Pool at capacity (${currentCount}/${this.maxPoolSize}), ignoring ${incomingMeta.txHash} ` +
         `(priority ${incomingMeta.priorityFee}) - lower than existing minimum (priority ${lowestPriorityMeta.priorityFee})`,
@@ -75,8 +84,8 @@ export class LowPriorityPreAddRule implements PreAddRule {
       txHashesToEvict: [],
       reason: {
         code: TxPoolRejectionCode.LOW_PRIORITY_FEE,
-        message: `Tx does not meet minimum priority fee. Required: ${lowestPriorityMeta.priorityFee + 1n}, got: ${incomingMeta.priorityFee}`,
-        minimumPriorityFee: lowestPriorityMeta.priorityFee + 1n,
+        message: `Tx does not meet minimum priority fee. Required: ${minimumFee}, got: ${incomingMeta.priorityFee}`,
+        minimumPriorityFee: minimumFee,
         txPriorityFee: incomingMeta.priorityFee,
       },
     });

package/src/mem_pools/tx_pool_v2/eviction/nullifier_conflict_rule.ts

@@ -15,11 +15,12 @@ export class NullifierConflictRule implements PreAddRule {
 
   private log = createLogger('p2p:tx_pool_v2:nullifier_conflict_rule');
 
-  check(incomingMeta: TxMetaData, poolAccess: PreAddPoolAccess, _context?: PreAddContext): Promise<PreAddResult> {
+  check(incomingMeta: TxMetaData, poolAccess: PreAddPoolAccess, context?: PreAddContext): Promise<PreAddResult> {
     const result = checkNullifierConflict(
       incomingMeta,
       nullifier => poolAccess.getTxHashByNullifier(nullifier),
       txHash => poolAccess.getMetadata(txHash),
+      context?.priceBumpPercentage,
     );
 
     if (result.shouldIgnore) {

package/src/mem_pools/tx_pool_v2/index.ts

@@ -7,6 +7,6 @@ export {
   type PoolReadAccess,
   DEFAULT_TX_POOL_V2_CONFIG,
 } from './interfaces.js';
-export { type TxMetaData, type TxState, buildTxMetaData, comparePriority } from './tx_metadata.js';
+export { type TxMetaData, type TxState, buildTxMetaData, comparePriority, stubTxMetaData } from './tx_metadata.js';
 export { TxArchive } from './archive/index.js';
 export { DeletedPool } from './deleted_pool.js';

package/src/mem_pools/tx_pool_v2/interfaces.ts

@@ -44,6 +44,8 @@ export type TxPoolV2Config = {
   minTxPoolAgeMs: number;
   /** Maximum number of evicted tx hashes to remember for metrics tracking */
   evictedTxCacheSize: number;
+  /** Minimum percentage fee increase required to replace an existing tx via RPC (0 = no bump). */
+  priceBumpPercentage: bigint;
 };
 
 /**
@@ -54,6 +56,7 @@ export const DEFAULT_TX_POOL_V2_CONFIG: TxPoolV2Config = {
   archivedTxLimit: 0, // 0 = disabled
   minTxPoolAgeMs: 2_000,
   evictedTxCacheSize: 10_000,
+  priceBumpPercentage: 10n,
 };
 
 /**
@@ -66,6 +69,8 @@ export type TxPoolV2Dependencies = {
   worldStateSynchronizer: WorldStateSynchronizer;
   /** Factory that creates a validator for re-validating pool transactions using metadata */
   createTxValidator: () => Promise<TxValidator<TxMetaData>>;
+  /** Checks whether a tx's setup-phase calls are on the allow list. Precomputed at receipt time. */
+  checkAllowedSetupCalls: (tx: Tx) => Promise<boolean>;
 };
 
 /**
@@ -107,12 +112,12 @@ export interface TxPoolV2 extends TypedEventEmitter<TxPoolV2Events> {
   addPendingTxs(txs: Tx[], opts?: { source?: string; feeComparisonOnly?: boolean }): Promise<AddTxsResult>;
 
   /**
-   * Checks if a transaction can be added without modifying the pool.
-   * Performs the same validation as addPendingTxs but doesn't persist changes.
+   * Checks if the pool would accept a transaction without modifying state.
+   * Used as a pre-check before expensive proof verification.
    * @param tx - Transaction to check
-   * @returns Result: 'accepted', 'ignored' (if already in pool or undesirable), or 'rejected' (if validation fails)
+   * @returns 'accepted' if the pool would accept, 'ignored' if already in pool or undesirable
    */
-  canAddPendingTx(tx: Tx): Promise<'accepted' | 'ignored' | 'rejected'>;
+  canAddPendingTx(tx: Tx): Promise<'accepted' | 'ignored'>;
 
   /**
    * Adds transactions as immediately protected for a given slot.