@aws-sdk/client-waf 3.31.0 → 3.35.0

package/dist-types/commands/UpdateByteMatchSetCommand.d.ts

@@ -0,0 +1,81 @@
+import { Command as $Command } from "@aws-sdk/smithy-client";
+import { Handler, HttpHandlerOptions as __HttpHandlerOptions, MetadataBearer as __MetadataBearer, MiddlewareStack } from "@aws-sdk/types";
+import { UpdateByteMatchSetRequest, UpdateByteMatchSetResponse } from "../models/models_0";
+import { ServiceInputTypes, ServiceOutputTypes, WAFClientResolvedConfig } from "../WAFClient";
+export interface UpdateByteMatchSetCommandInput extends UpdateByteMatchSetRequest {
+}
+export interface UpdateByteMatchSetCommandOutput extends UpdateByteMatchSetResponse, __MetadataBearer {
+}
+/**
+ * <note>
+ *             <p>This is <b>AWS WAF Classic</b> documentation. For
+ *       more information, see <a href="https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html">AWS
+ *       WAF Classic</a> in the developer guide.</p>
+ *             <p>
+ *                <b>For the latest version of AWS
+ *       WAF</b>, use the AWS WAFV2 API and see the <a href="https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html">AWS WAF Developer Guide</a>. With the latest version, AWS WAF has a single set of endpoints for regional and global use. </p>
+ *          </note>
+ * 		       <p>Inserts or deletes <a>ByteMatchTuple</a> objects (filters) in a <a>ByteMatchSet</a>. For each <code>ByteMatchTuple</code> object,
+ * 			you specify the following values: </p>
+ * 		       <ul>
+ *             <li>
+ *                <p>Whether to insert or delete the object from the array. If you want to change a <code>ByteMatchSetUpdate</code> object,
+ * 				you delete the existing object and add a new one.</p>
+ *             </li>
+ *             <li>
+ *                <p>The part of a web request that you want AWS WAF to inspect, such as a query string or the value of the <code>User-Agent</code> header. </p>
+ *             </li>
+ *             <li>
+ *                <p>The bytes (typically a string that corresponds with ASCII characters) that you want AWS WAF to look for. For more information, including how you specify
+ * 				the values for the AWS WAF API and the AWS CLI or SDKs, see <code>TargetString</code> in the <a>ByteMatchTuple</a> data type. </p>
+ *             </li>
+ *             <li>
+ *                <p>Where to look, such as at the beginning or the end of a query string.</p>
+ *             </li>
+ *             <li>
+ *                <p>Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string.</p>
+ *             </li>
+ *          </ul>
+ * 		       <p>For example, you can add a <code>ByteMatchSetUpdate</code> object that matches web requests in which <code>User-Agent</code> headers contain
+ * 			the string <code>BadBot</code>. You can then configure AWS WAF to block those requests.</p>
+ * 		       <p>To create and configure a <code>ByteMatchSet</code>, perform the following steps:</p>
+ * 		       <ol>
+ *             <li>
+ *                <p>Create a <code>ByteMatchSet.</code> For more information, see <a>CreateByteMatchSet</a>.</p>
+ *             </li>
+ *             <li>
+ *                <p>Use <a>GetChangeToken</a> to get the change token that you provide in the <code>ChangeToken</code> parameter of an
+ * 				<code>UpdateByteMatchSet</code> request.</p>
+ *             </li>
+ *             <li>
+ *                <p>Submit an <code>UpdateByteMatchSet</code> request to specify the part of the request that you want AWS WAF to inspect
+ * 				(for example, the header or the URI) and the value that you want AWS WAF to watch for.</p>
+ *             </li>
+ *          </ol>
+ * 		       <p>For more information about how to use the AWS WAF API to allow or block HTTP requests, see the
+ * 			<a href="https://docs.aws.amazon.com/waf/latest/developerguide/">AWS WAF Developer Guide</a>.</p>
+ * @example
+ * Use a bare-bones client and the command you need to make an API call.
+ * ```javascript
+ * import { WAFClient, UpdateByteMatchSetCommand } from "@aws-sdk/client-waf"; // ES Modules import
+ * // const { WAFClient, UpdateByteMatchSetCommand } = require("@aws-sdk/client-waf"); // CommonJS import
+ * const client = new WAFClient(config);
+ * const command = new UpdateByteMatchSetCommand(input);
+ * const response = await client.send(command);
+ * ```
+ *
+ * @see {@link UpdateByteMatchSetCommandInput} for command's `input` shape.
+ * @see {@link UpdateByteMatchSetCommandOutput} for command's `response` shape.
+ * @see {@link WAFClientResolvedConfig | config} for command's `input` shape.
+ *
+ */
+export declare class UpdateByteMatchSetCommand extends $Command<UpdateByteMatchSetCommandInput, UpdateByteMatchSetCommandOutput, WAFClientResolvedConfig> {
+    readonly input: UpdateByteMatchSetCommandInput;
+    constructor(input: UpdateByteMatchSetCommandInput);
+    /**
+     * @internal
+     */
+    resolveMiddleware(clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>, configuration: WAFClientResolvedConfig, options?: __HttpHandlerOptions): Handler<UpdateByteMatchSetCommandInput, UpdateByteMatchSetCommandOutput>;
+    private serialize;
+    private deserialize;
+}

package/dist-types/commands/UpdateGeoMatchSetCommand.d.ts

@@ -0,0 +1,73 @@
+import { Command as $Command } from "@aws-sdk/smithy-client";
+import { Handler, HttpHandlerOptions as __HttpHandlerOptions, MetadataBearer as __MetadataBearer, MiddlewareStack } from "@aws-sdk/types";
+import { UpdateGeoMatchSetRequest, UpdateGeoMatchSetResponse } from "../models/models_0";
+import { ServiceInputTypes, ServiceOutputTypes, WAFClientResolvedConfig } from "../WAFClient";
+export interface UpdateGeoMatchSetCommandInput extends UpdateGeoMatchSetRequest {
+}
+export interface UpdateGeoMatchSetCommandOutput extends UpdateGeoMatchSetResponse, __MetadataBearer {
+}
+/**
+ * <note>
+ *             <p>This is <b>AWS WAF Classic</b> documentation. For
+ *       more information, see <a href="https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html">AWS
+ *       WAF Classic</a> in the developer guide.</p>
+ *             <p>
+ *                <b>For the latest version of AWS
+ *       WAF</b>, use the AWS WAFV2 API and see the <a href="https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html">AWS WAF Developer Guide</a>. With the latest version, AWS WAF has a single set of endpoints for regional and global use. </p>
+ *          </note>
+ *          <p>Inserts or deletes <a>GeoMatchConstraint</a> objects in an <code>GeoMatchSet</code>. For each <code>GeoMatchConstraint</code> object,
+ * 			you specify the following values: </p>
+ * 		       <ul>
+ *             <li>
+ *                       <p>Whether to insert or delete the object from the array. If you want to change an <code>GeoMatchConstraint</code> object, you delete the existing object and add a new one.</p>
+ *                   </li>
+ *             <li>
+ * 				           <p>The <code>Type</code>. The only valid value for <code>Type</code> is <code>Country</code>.</p>
+ * 				        </li>
+ *             <li>
+ *                <p>The <code>Value</code>, which is a two character code for the country to add to the <code>GeoMatchConstraint</code> object. Valid codes are listed in <a>GeoMatchConstraint$Value</a>.</p>
+ *             </li>
+ *          </ul>
+ *
+ * 		       <p>To create and configure an <code>GeoMatchSet</code>, perform the following steps:</p>
+ * 		       <ol>
+ *             <li>
+ *                <p>Submit a <a>CreateGeoMatchSet</a> request.</p>
+ *             </li>
+ *             <li>
+ *                <p>Use <a>GetChangeToken</a> to get the change token that you provide in the <code>ChangeToken</code> parameter of an
+ * 				<a>UpdateGeoMatchSet</a> request.</p>
+ *             </li>
+ *             <li>
+ *                <p>Submit an <code>UpdateGeoMatchSet</code> request to specify the country that you want AWS WAF to watch for.</p>
+ *             </li>
+ *          </ol>
+ * 		       <p>When you update an <code>GeoMatchSet</code>, you specify the country that you want to add and/or the country that you want to delete.
+ * 			If you want to change a country, you delete the existing country and add the new one.</p>
+ * 		       <p>For more information about how to use the AWS WAF API to allow or block HTTP requests, see the
+ * 			<a href="https://docs.aws.amazon.com/waf/latest/developerguide/">AWS WAF Developer Guide</a>.</p>
+ * @example
+ * Use a bare-bones client and the command you need to make an API call.
+ * ```javascript
+ * import { WAFClient, UpdateGeoMatchSetCommand } from "@aws-sdk/client-waf"; // ES Modules import
+ * // const { WAFClient, UpdateGeoMatchSetCommand } = require("@aws-sdk/client-waf"); // CommonJS import
+ * const client = new WAFClient(config);
+ * const command = new UpdateGeoMatchSetCommand(input);
+ * const response = await client.send(command);
+ * ```
+ *
+ * @see {@link UpdateGeoMatchSetCommandInput} for command's `input` shape.
+ * @see {@link UpdateGeoMatchSetCommandOutput} for command's `response` shape.
+ * @see {@link WAFClientResolvedConfig | config} for command's `input` shape.
+ *
+ */
+export declare class UpdateGeoMatchSetCommand extends $Command<UpdateGeoMatchSetCommandInput, UpdateGeoMatchSetCommandOutput, WAFClientResolvedConfig> {
+    readonly input: UpdateGeoMatchSetCommandInput;
+    constructor(input: UpdateGeoMatchSetCommandInput);
+    /**
+     * @internal
+     */
+    resolveMiddleware(clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>, configuration: WAFClientResolvedConfig, options?: __HttpHandlerOptions): Handler<UpdateGeoMatchSetCommandInput, UpdateGeoMatchSetCommandOutput>;
+    private serialize;
+    private deserialize;
+}

package/dist-types/commands/UpdateIPSetCommand.d.ts

@@ -0,0 +1,108 @@
+import { Command as $Command } from "@aws-sdk/smithy-client";
+import { Handler, HttpHandlerOptions as __HttpHandlerOptions, MetadataBearer as __MetadataBearer, MiddlewareStack } from "@aws-sdk/types";
+import { UpdateIPSetRequest, UpdateIPSetResponse } from "../models/models_0";
+import { ServiceInputTypes, ServiceOutputTypes, WAFClientResolvedConfig } from "../WAFClient";
+export interface UpdateIPSetCommandInput extends UpdateIPSetRequest {
+}
+export interface UpdateIPSetCommandOutput extends UpdateIPSetResponse, __MetadataBearer {
+}
+/**
+ * <note>
+ *             <p>This is <b>AWS WAF Classic</b> documentation. For
+ *       more information, see <a href="https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html">AWS
+ *       WAF Classic</a> in the developer guide.</p>
+ *             <p>
+ *                <b>For the latest version of AWS
+ *       WAF</b>, use the AWS WAFV2 API and see the <a href="https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html">AWS WAF Developer Guide</a>. With the latest version, AWS WAF has a single set of endpoints for regional and global use. </p>
+ *          </note>
+ *          <p>Inserts or deletes <a>IPSetDescriptor</a> objects in an
+ *          <code>IPSet</code>. For each <code>IPSetDescriptor</code> object, you specify the following
+ *          values: </p>
+ *          <ul>
+ *             <li>
+ *                <p>Whether to insert or delete the object from the array. If you want to change an
+ *                   <code>IPSetDescriptor</code> object, you delete the existing object and add a new
+ *                one.</p>
+ *             </li>
+ *             <li>
+ *                <p>The IP address version, <code>IPv4</code> or <code>IPv6</code>. </p>
+ *             </li>
+ *             <li>
+ *                <p>The IP address in CIDR notation, for example, <code>192.0.2.0/24</code> (for
+ *                the range of IP addresses from <code>192.0.2.0</code> to <code>192.0.2.255</code>) or
+ *                   <code>192.0.2.44/32</code> (for the individual IP address
+ *                <code>192.0.2.44</code>). </p>
+ *             </li>
+ *          </ul>
+ *          <p>AWS WAF supports IPv4 address ranges: /8 and any range between /16 through /32. AWS
+ *          WAF supports IPv6 address ranges: /24, /32, /48, /56, /64, and /128. For more
+ *          information about CIDR notation, see the Wikipedia entry <a href="https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing">Classless
+ *             Inter-Domain Routing</a>.</p>
+ *          <p>IPv6 addresses can be represented using any of the following formats:</p>
+ *          <ul>
+ *             <li>
+ *                <p>1111:0000:0000:0000:0000:0000:0000:0111/128</p>
+ *             </li>
+ *             <li>
+ *                <p>1111:0:0:0:0:0:0:0111/128</p>
+ *             </li>
+ *             <li>
+ *                <p>1111::0111/128</p>
+ *             </li>
+ *             <li>
+ *                <p>1111::111/128</p>
+ *             </li>
+ *          </ul>
+ *          <p>You use an <code>IPSet</code> to specify which web requests you want to allow or
+ *          block based on the IP addresses that the requests originated from. For example, if you're
+ *          receiving a lot of requests from one or a small number of IP addresses and you want to
+ *          block the requests, you can create an <code>IPSet</code> that specifies those IP addresses,
+ *          and then configure AWS WAF to block the requests. </p>
+ *          <p>To create and configure an <code>IPSet</code>, perform the following steps:</p>
+ *          <ol>
+ *             <li>
+ *                <p>Submit a <a>CreateIPSet</a> request.</p>
+ *             </li>
+ *             <li>
+ *                <p>Use <a>GetChangeToken</a> to get the change token that you provide
+ *                in the <code>ChangeToken</code> parameter of an <a>UpdateIPSet</a>
+ *                request.</p>
+ *             </li>
+ *             <li>
+ *                <p>Submit an <code>UpdateIPSet</code> request to specify the IP addresses that you
+ *                want AWS WAF to watch for.</p>
+ *             </li>
+ *          </ol>
+ *          <p>When you update an <code>IPSet</code>, you specify the IP addresses that you want to
+ *          add and/or the IP addresses that you want to delete. If you want to change an IP address,
+ *          you delete the existing IP address and add the new one.</p>
+ *          <p>You can insert a maximum of 1000 addresses in a single
+ *          request.</p>
+ *          <p>For more information about how to use the AWS WAF API to allow or block HTTP
+ *          requests, see the <a href="https://docs.aws.amazon.com/waf/latest/developerguide/">AWS WAF
+ *             Developer Guide</a>.</p>
+ * @example
+ * Use a bare-bones client and the command you need to make an API call.
+ * ```javascript
+ * import { WAFClient, UpdateIPSetCommand } from "@aws-sdk/client-waf"; // ES Modules import
+ * // const { WAFClient, UpdateIPSetCommand } = require("@aws-sdk/client-waf"); // CommonJS import
+ * const client = new WAFClient(config);
+ * const command = new UpdateIPSetCommand(input);
+ * const response = await client.send(command);
+ * ```
+ *
+ * @see {@link UpdateIPSetCommandInput} for command's `input` shape.
+ * @see {@link UpdateIPSetCommandOutput} for command's `response` shape.
+ * @see {@link WAFClientResolvedConfig | config} for command's `input` shape.
+ *
+ */
+export declare class UpdateIPSetCommand extends $Command<UpdateIPSetCommandInput, UpdateIPSetCommandOutput, WAFClientResolvedConfig> {
+    readonly input: UpdateIPSetCommandInput;
+    constructor(input: UpdateIPSetCommandInput);
+    /**
+     * @internal
+     */
+    resolveMiddleware(clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>, configuration: WAFClientResolvedConfig, options?: __HttpHandlerOptions): Handler<UpdateIPSetCommandInput, UpdateIPSetCommandOutput>;
+    private serialize;
+    private deserialize;
+}

package/dist-types/commands/UpdateRateBasedRuleCommand.d.ts

@@ -0,0 +1,89 @@
+import { Command as $Command } from "@aws-sdk/smithy-client";
+import { Handler, HttpHandlerOptions as __HttpHandlerOptions, MetadataBearer as __MetadataBearer, MiddlewareStack } from "@aws-sdk/types";
+import { UpdateRateBasedRuleRequest, UpdateRateBasedRuleResponse } from "../models/models_0";
+import { ServiceInputTypes, ServiceOutputTypes, WAFClientResolvedConfig } from "../WAFClient";
+export interface UpdateRateBasedRuleCommandInput extends UpdateRateBasedRuleRequest {
+}
+export interface UpdateRateBasedRuleCommandOutput extends UpdateRateBasedRuleResponse, __MetadataBearer {
+}
+/**
+ * <note>
+ *             <p>This is <b>AWS WAF Classic</b> documentation. For
+ *       more information, see <a href="https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html">AWS
+ *       WAF Classic</a> in the developer guide.</p>
+ *             <p>
+ *                <b>For the latest version of AWS
+ *       WAF</b>, use the AWS WAFV2 API and see the <a href="https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html">AWS WAF Developer Guide</a>. With the latest version, AWS WAF has a single set of endpoints for regional and global use. </p>
+ *          </note>
+ *          <p>Inserts or deletes <a>Predicate</a> objects in a rule and updates the
+ *             <code>RateLimit</code> in the rule. </p>
+ *          <p>Each <code>Predicate</code> object identifies a predicate, such as a <a>ByteMatchSet</a> or an <a>IPSet</a>, that specifies the web requests
+ *          that you want to block or count. The <code>RateLimit</code> specifies the number of
+ *          requests every five minutes that triggers the rule.</p>
+ *          <p>If you add more than one predicate to a <code>RateBasedRule</code>, a request must
+ *          match all the predicates and exceed the <code>RateLimit</code> to be counted or blocked.
+ *          For example, suppose you add the following to a <code>RateBasedRule</code>:</p>
+ *          <ul>
+ *             <li>
+ *                <p>An <code>IPSet</code> that matches the IP address <code>192.0.2.44/32</code>
+ *                </p>
+ *             </li>
+ *             <li>
+ *                <p>A <code>ByteMatchSet</code> that matches <code>BadBot</code> in the
+ *                   <code>User-Agent</code> header</p>
+ *             </li>
+ *          </ul>
+ *          <p>Further, you specify a
+ *             <code>RateLimit</code> of 1,000.</p>
+ *          <p>You then add the <code>RateBasedRule</code> to a <code>WebACL</code> and specify that
+ *          you want to block requests that satisfy the rule. For a request to be blocked, it must come
+ *          from the IP address 192.0.2.44 <i>and</i> the <code>User-Agent</code> header
+ *          in the request must contain the value <code>BadBot</code>. Further, requests that match
+ *          these two conditions much be received at a rate of more than 1,000 every five minutes. If
+ *          the rate drops below this limit, AWS WAF no longer blocks the requests.</p>
+ *
+ * 		       <p>As a second example, suppose you want to limit requests to a particular page on your site. To do this, you could add the following to a
+ *             <code>RateBasedRule</code>:</p>
+ *
+ *
+ *          <ul>
+ *             <li>
+ *                <p>A <code>ByteMatchSet</code> with <code>FieldToMatch</code> of <code>URI</code>
+ *                </p>
+ *             </li>
+ *             <li>
+ *                <p>A <code>PositionalConstraint</code> of <code>STARTS_WITH</code>
+ *                </p>
+ *             </li>
+ *             <li>
+ *                <p>A <code>TargetString</code> of <code>login</code>
+ *                </p>
+ *             </li>
+ *          </ul>
+ *          <p>Further, you specify a <code>RateLimit</code> of 1,000.</p>
+ *          <p>By adding this <code>RateBasedRule</code> to a <code>WebACL</code>, you could limit requests to your login page without affecting the rest of your site.</p>
+ * @example
+ * Use a bare-bones client and the command you need to make an API call.
+ * ```javascript
+ * import { WAFClient, UpdateRateBasedRuleCommand } from "@aws-sdk/client-waf"; // ES Modules import
+ * // const { WAFClient, UpdateRateBasedRuleCommand } = require("@aws-sdk/client-waf"); // CommonJS import
+ * const client = new WAFClient(config);
+ * const command = new UpdateRateBasedRuleCommand(input);
+ * const response = await client.send(command);
+ * ```
+ *
+ * @see {@link UpdateRateBasedRuleCommandInput} for command's `input` shape.
+ * @see {@link UpdateRateBasedRuleCommandOutput} for command's `response` shape.
+ * @see {@link WAFClientResolvedConfig | config} for command's `input` shape.
+ *
+ */
+export declare class UpdateRateBasedRuleCommand extends $Command<UpdateRateBasedRuleCommandInput, UpdateRateBasedRuleCommandOutput, WAFClientResolvedConfig> {
+    readonly input: UpdateRateBasedRuleCommandInput;
+    constructor(input: UpdateRateBasedRuleCommandInput);
+    /**
+     * @internal
+     */
+    resolveMiddleware(clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>, configuration: WAFClientResolvedConfig, options?: __HttpHandlerOptions): Handler<UpdateRateBasedRuleCommandInput, UpdateRateBasedRuleCommandOutput>;
+    private serialize;
+    private deserialize;
+}

package/dist-types/commands/UpdateRegexMatchSetCommand.d.ts

@@ -0,0 +1,77 @@
+import { Command as $Command } from "@aws-sdk/smithy-client";
+import { Handler, HttpHandlerOptions as __HttpHandlerOptions, MetadataBearer as __MetadataBearer, MiddlewareStack } from "@aws-sdk/types";
+import { UpdateRegexMatchSetRequest, UpdateRegexMatchSetResponse } from "../models/models_0";
+import { ServiceInputTypes, ServiceOutputTypes, WAFClientResolvedConfig } from "../WAFClient";
+export interface UpdateRegexMatchSetCommandInput extends UpdateRegexMatchSetRequest {
+}
+export interface UpdateRegexMatchSetCommandOutput extends UpdateRegexMatchSetResponse, __MetadataBearer {
+}
+/**
+ * <note>
+ *             <p>This is <b>AWS WAF Classic</b> documentation. For
+ *       more information, see <a href="https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html">AWS
+ *       WAF Classic</a> in the developer guide.</p>
+ *             <p>
+ *                <b>For the latest version of AWS
+ *       WAF</b>, use the AWS WAFV2 API and see the <a href="https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html">AWS WAF Developer Guide</a>. With the latest version, AWS WAF has a single set of endpoints for regional and global use. </p>
+ *          </note>
+ *          <p>Inserts or deletes <a>RegexMatchTuple</a> objects (filters) in a <a>RegexMatchSet</a>. For each <code>RegexMatchSetUpdate</code> object,
+ * 			you specify the following values: </p>
+ * 		       <ul>
+ *             <li>
+ *                <p>Whether to insert or delete the object from the array. If you want to change a <code>RegexMatchSetUpdate</code> object,
+ * 				you delete the existing object and add a new one.</p>
+ *             </li>
+ *             <li>
+ *                <p>The part of a web request that you want AWS WAF to inspectupdate, such as a query string or the value of the <code>User-Agent</code> header. </p>
+ *             </li>
+ *             <li>
+ *                <p>The identifier of the pattern (a regular expression) that you want AWS WAF to look for. For more information, see <a>RegexPatternSet</a>. </p>
+ *             </li>
+ *             <li>
+ *                <p>Whether to perform any conversions on the request, such as converting it to lowercase, before inspecting it for the specified string.</p>
+ *             </li>
+ *          </ul>
+ * 		       <p> For example, you can create a <code>RegexPatternSet</code> that matches any requests with <code>User-Agent</code> headers
+ *          that contain the string <code>B[a@]dB[o0]t</code>. You can then configure AWS WAF to reject those requests.</p>
+ * 		       <p>To create and configure a <code>RegexMatchSet</code>, perform the following steps:</p>
+ * 		       <ol>
+ *             <li>
+ *                <p>Create a <code>RegexMatchSet.</code> For more information, see <a>CreateRegexMatchSet</a>.</p>
+ *             </li>
+ *             <li>
+ *                <p>Use <a>GetChangeToken</a> to get the change token that you provide in the <code>ChangeToken</code> parameter of an
+ * 				<code>UpdateRegexMatchSet</code> request.</p>
+ *             </li>
+ *             <li>
+ *                <p>Submit an <code>UpdateRegexMatchSet</code> request to specify the part of the request that you want AWS WAF to inspect
+ * 				(for example, the header or the URI) and the identifier of the <code>RegexPatternSet</code> that contain the regular expression patters you want AWS WAF to watch for.</p>
+ *             </li>
+ *          </ol>
+ * 		       <p>For more information about how to use the AWS WAF API to allow or block HTTP requests, see the
+ * 			<a href="https://docs.aws.amazon.com/waf/latest/developerguide/">AWS WAF Developer Guide</a>.</p>
+ * @example
+ * Use a bare-bones client and the command you need to make an API call.
+ * ```javascript
+ * import { WAFClient, UpdateRegexMatchSetCommand } from "@aws-sdk/client-waf"; // ES Modules import
+ * // const { WAFClient, UpdateRegexMatchSetCommand } = require("@aws-sdk/client-waf"); // CommonJS import
+ * const client = new WAFClient(config);
+ * const command = new UpdateRegexMatchSetCommand(input);
+ * const response = await client.send(command);
+ * ```
+ *
+ * @see {@link UpdateRegexMatchSetCommandInput} for command's `input` shape.
+ * @see {@link UpdateRegexMatchSetCommandOutput} for command's `response` shape.
+ * @see {@link WAFClientResolvedConfig | config} for command's `input` shape.
+ *
+ */
+export declare class UpdateRegexMatchSetCommand extends $Command<UpdateRegexMatchSetCommandInput, UpdateRegexMatchSetCommandOutput, WAFClientResolvedConfig> {
+    readonly input: UpdateRegexMatchSetCommandInput;
+    constructor(input: UpdateRegexMatchSetCommandInput);
+    /**
+     * @internal
+     */
+    resolveMiddleware(clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>, configuration: WAFClientResolvedConfig, options?: __HttpHandlerOptions): Handler<UpdateRegexMatchSetCommandInput, UpdateRegexMatchSetCommandOutput>;
+    private serialize;
+    private deserialize;
+}

package/dist-types/commands/UpdateRegexPatternSetCommand.d.ts

@@ -0,0 +1,82 @@
+import { Command as $Command } from "@aws-sdk/smithy-client";
+import { Handler, HttpHandlerOptions as __HttpHandlerOptions, MetadataBearer as __MetadataBearer, MiddlewareStack } from "@aws-sdk/types";
+import { UpdateRegexPatternSetRequest, UpdateRegexPatternSetResponse } from "../models/models_0";
+import { ServiceInputTypes, ServiceOutputTypes, WAFClientResolvedConfig } from "../WAFClient";
+export interface UpdateRegexPatternSetCommandInput extends UpdateRegexPatternSetRequest {
+}
+export interface UpdateRegexPatternSetCommandOutput extends UpdateRegexPatternSetResponse, __MetadataBearer {
+}
+/**
+ * <note>
+ *             <p>This is <b>AWS WAF Classic</b> documentation. For
+ *       more information, see <a href="https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html">AWS
+ *       WAF Classic</a> in the developer guide.</p>
+ *             <p>
+ *                <b>For the latest version of AWS
+ *       WAF</b>, use the AWS WAFV2 API and see the <a href="https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html">AWS WAF Developer Guide</a>. With the latest version, AWS WAF has a single set of endpoints for regional and global use. </p>
+ *          </note>
+ *          <p>Inserts or deletes <code>RegexPatternString</code> objects in a <a>RegexPatternSet</a>. For each <code>RegexPatternString</code> object,
+ * 			you specify the following values: </p>
+ * 		       <ul>
+ *             <li>
+ * 			            <p>Whether to insert or delete the <code>RegexPatternString</code>.</p>
+ *             </li>
+ *             <li>
+ *                <p>The regular expression pattern that you want to insert or delete. For more information, see <a>RegexPatternSet</a>. </p>
+ *             </li>
+ *          </ul>
+ * 		       <p> For example, you can create a <code>RegexPatternString</code> such as <code>B[a@]dB[o0]t</code>. AWS WAF will match this <code>RegexPatternString</code> to:</p>
+ *                 <ul>
+ *             <li>
+ * 				           <p>BadBot</p>
+ * 				        </li>
+ *             <li>
+ * 				           <p>BadB0t</p>
+ * 				        </li>
+ *             <li>
+ * 				           <p>B@dBot</p>
+ * 				        </li>
+ *             <li>
+ * 				           <p>B@dB0t</p>
+ * 				        </li>
+ *          </ul>
+ * 		       <p>To create and configure a <code>RegexPatternSet</code>, perform the following steps:</p>
+ * 		       <ol>
+ *             <li>
+ *                <p>Create a <code>RegexPatternSet.</code> For more information, see <a>CreateRegexPatternSet</a>.</p>
+ *             </li>
+ *             <li>
+ *                <p>Use <a>GetChangeToken</a> to get the change token that you provide in the <code>ChangeToken</code> parameter of an
+ * 				<code>UpdateRegexPatternSet</code> request.</p>
+ *             </li>
+ *             <li>
+ *                <p>Submit an <code>UpdateRegexPatternSet</code> request to specify the regular expression pattern that you want AWS WAF to watch for.</p>
+ *             </li>
+ *          </ol>
+ * 		       <p>For more information about how to use the AWS WAF API to allow or block HTTP requests, see the
+ * 			<a href="https://docs.aws.amazon.com/waf/latest/developerguide/">AWS WAF Developer Guide</a>.</p>
+ * @example
+ * Use a bare-bones client and the command you need to make an API call.
+ * ```javascript
+ * import { WAFClient, UpdateRegexPatternSetCommand } from "@aws-sdk/client-waf"; // ES Modules import
+ * // const { WAFClient, UpdateRegexPatternSetCommand } = require("@aws-sdk/client-waf"); // CommonJS import
+ * const client = new WAFClient(config);
+ * const command = new UpdateRegexPatternSetCommand(input);
+ * const response = await client.send(command);
+ * ```
+ *
+ * @see {@link UpdateRegexPatternSetCommandInput} for command's `input` shape.
+ * @see {@link UpdateRegexPatternSetCommandOutput} for command's `response` shape.
+ * @see {@link WAFClientResolvedConfig | config} for command's `input` shape.
+ *
+ */
+export declare class UpdateRegexPatternSetCommand extends $Command<UpdateRegexPatternSetCommandInput, UpdateRegexPatternSetCommandOutput, WAFClientResolvedConfig> {
+    readonly input: UpdateRegexPatternSetCommandInput;
+    constructor(input: UpdateRegexPatternSetCommandInput);
+    /**
+     * @internal
+     */
+    resolveMiddleware(clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>, configuration: WAFClientResolvedConfig, options?: __HttpHandlerOptions): Handler<UpdateRegexPatternSetCommandInput, UpdateRegexPatternSetCommandOutput>;
+    private serialize;
+    private deserialize;
+}

package/dist-types/commands/UpdateRuleCommand.d.ts

@@ -0,0 +1,84 @@
+import { Command as $Command } from "@aws-sdk/smithy-client";
+import { Handler, HttpHandlerOptions as __HttpHandlerOptions, MetadataBearer as __MetadataBearer, MiddlewareStack } from "@aws-sdk/types";
+import { UpdateRuleRequest, UpdateRuleResponse } from "../models/models_0";
+import { ServiceInputTypes, ServiceOutputTypes, WAFClientResolvedConfig } from "../WAFClient";
+export interface UpdateRuleCommandInput extends UpdateRuleRequest {
+}
+export interface UpdateRuleCommandOutput extends UpdateRuleResponse, __MetadataBearer {
+}
+/**
+ * <note>
+ *             <p>This is <b>AWS WAF Classic</b> documentation. For
+ *       more information, see <a href="https://docs.aws.amazon.com/waf/latest/developerguide/classic-waf-chapter.html">AWS
+ *       WAF Classic</a> in the developer guide.</p>
+ *             <p>
+ *                <b>For the latest version of AWS
+ *       WAF</b>, use the AWS WAFV2 API and see the <a href="https://docs.aws.amazon.com/waf/latest/developerguide/waf-chapter.html">AWS WAF Developer Guide</a>. With the latest version, AWS WAF has a single set of endpoints for regional and global use. </p>
+ *          </note>
+ * 		       <p>Inserts or deletes <a>Predicate</a> objects in a <code>Rule</code>. Each
+ *             <code>Predicate</code> object identifies a predicate, such as a <a>ByteMatchSet</a> or an <a>IPSet</a>, that specifies the web requests
+ *          that you want to allow, block, or count. If you add more than one predicate to a
+ *             <code>Rule</code>, a request must match all of the specifications to be allowed,
+ *          blocked, or counted. For example, suppose
+ *          that
+ *          you add the following to a <code>Rule</code>: </p>
+ * 		       <ul>
+ *             <li>
+ *                <p>A <code>ByteMatchSet</code> that matches the value <code>BadBot</code> in the <code>User-Agent</code> header</p>
+ *             </li>
+ *             <li>
+ *                <p>An <code>IPSet</code> that matches the IP address <code>192.0.2.44</code>
+ *                </p>
+ *             </li>
+ *          </ul>
+ * 		       <p>You then add the <code>Rule</code> to a <code>WebACL</code> and specify that you want to block requests that satisfy the <code>Rule</code>.
+ * 			For a request to be blocked, the <code>User-Agent</code> header in the request must contain the value <code>BadBot</code>
+ * 			         <i>and</i> the request must originate from the IP address 192.0.2.44.</p>
+ * 		       <p>To create and configure a <code>Rule</code>, perform the following steps:</p>
+ * 		       <ol>
+ *             <li>
+ *                <p>Create and update the predicates that you want to include in the <code>Rule</code>.</p>
+ *             </li>
+ *             <li>
+ *                <p>Create the <code>Rule</code>. See <a>CreateRule</a>.</p>
+ *             </li>
+ *             <li>
+ *                <p>Use <code>GetChangeToken</code> to get the change token that you provide in the <code>ChangeToken</code> parameter of an
+ * 				<a>UpdateRule</a> request.</p>
+ *             </li>
+ *             <li>
+ *                <p>Submit an <code>UpdateRule</code> request to add predicates to the <code>Rule</code>.</p>
+ *             </li>
+ *             <li>
+ *                <p>Create and update a <code>WebACL</code> that contains the <code>Rule</code>. See <a>CreateWebACL</a>.</p>
+ *             </li>
+ *          </ol>
+ * 		       <p>If you want to replace one <code>ByteMatchSet</code> or <code>IPSet</code> with another, you delete the existing one and
+ * 			add the new one.</p>
+ * 		       <p>For more information about how to use the AWS WAF API to allow or block HTTP requests, see the
+ * 			<a href="https://docs.aws.amazon.com/waf/latest/developerguide/">AWS WAF Developer Guide</a>.</p>
+ * @example
+ * Use a bare-bones client and the command you need to make an API call.
+ * ```javascript
+ * import { WAFClient, UpdateRuleCommand } from "@aws-sdk/client-waf"; // ES Modules import
+ * // const { WAFClient, UpdateRuleCommand } = require("@aws-sdk/client-waf"); // CommonJS import
+ * const client = new WAFClient(config);
+ * const command = new UpdateRuleCommand(input);
+ * const response = await client.send(command);
+ * ```
+ *
+ * @see {@link UpdateRuleCommandInput} for command's `input` shape.
+ * @see {@link UpdateRuleCommandOutput} for command's `response` shape.
+ * @see {@link WAFClientResolvedConfig | config} for command's `input` shape.
+ *
+ */
+export declare class UpdateRuleCommand extends $Command<UpdateRuleCommandInput, UpdateRuleCommandOutput, WAFClientResolvedConfig> {
+    readonly input: UpdateRuleCommandInput;
+    constructor(input: UpdateRuleCommandInput);
+    /**
+     * @internal
+     */
+    resolveMiddleware(clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>, configuration: WAFClientResolvedConfig, options?: __HttpHandlerOptions): Handler<UpdateRuleCommandInput, UpdateRuleCommandOutput>;
+    private serialize;
+    private deserialize;
+}