@aws-sdk/client-transfer 3.238.0 → 3.239.0

package/dist-cjs/endpoint/ruleset.js

@@ -1,7 +1,7 @@
 "use strict";
 Object.defineProperty(exports, "__esModule", { value: true });
 exports.ruleSet = void 0;
-const r = "fn", s = "argv", t = "ref";
-const a = true, b = false, c = "String", d = "PartitionResult", e = "tree", f = "error", g = "endpoint", h = { "required": true, "default": false, "type": "Boolean" }, i = { [t]: "Endpoint" }, j = { [r]: "booleanEquals", [s]: [{ [t]: "UseFIPS" }, true] }, k = { [r]: "booleanEquals", [s]: [{ [t]: "UseDualStack" }, true] }, l = {}, m = { [r]: "booleanEquals", [s]: [true, { [r]: "getAttr", [s]: [{ [t]: d }, "supportsFIPS"] }] }, n = { [r]: "booleanEquals", [s]: [true, { [r]: "getAttr", [s]: [{ [t]: d }, "supportsDualStack"] }] }, o = [i], p = [j], q = [k];
-const _data = { version: "1.0", parameters: { Region: { required: a, type: c }, UseDualStack: h, UseFIPS: h, Endpoint: { required: b, type: c } }, rules: [{ conditions: [{ [r]: "aws.partition", [s]: [{ [t]: "Region" }], assign: d }], type: e, rules: [{ conditions: [{ [r]: "isSet", [s]: o }, { [r]: "parseURL", [s]: o, assign: "url" }], type: e, rules: [{ conditions: p, error: "Invalid Configuration: FIPS and custom endpoint are not supported", type: f }, { type: e, rules: [{ conditions: q, error: "Invalid Configuration: Dualstack and custom endpoint are not supported", type: f }, { endpoint: { url: i, properties: l, headers: l }, type: g }] }] }, { conditions: [j, k], type: e, rules: [{ conditions: [m, n], type: e, rules: [{ endpoint: { url: "https://transfer-fips.{Region}.{PartitionResult#dualStackDnsSuffix}", properties: l, headers: l }, type: g }] }, { error: "FIPS and DualStack are enabled, but this partition does not support one or both", type: f }] }, { conditions: p, type: e, rules: [{ conditions: [m], type: e, rules: [{ type: e, rules: [{ endpoint: { url: "https://transfer-fips.{Region}.{PartitionResult#dnsSuffix}", properties: l, headers: l }, type: g }] }] }, { error: "FIPS is enabled but this partition does not support FIPS", type: f }] }, { conditions: q, type: e, rules: [{ conditions: [n], type: e, rules: [{ endpoint: { url: "https://transfer.{Region}.{PartitionResult#dualStackDnsSuffix}", properties: l, headers: l }, type: g }] }, { error: "DualStack is enabled but this partition does not support DualStack", type: f }] }, { endpoint: { url: "https://transfer.{Region}.{PartitionResult#dnsSuffix}", properties: l, headers: l }, type: g }] }] };
+const q = "fn", r = "argv", s = "ref";
+const a = true, b = false, c = "String", d = "PartitionResult", e = "tree", f = "error", g = "endpoint", h = { "required": true, "default": false, "type": "Boolean" }, i = { [s]: "Endpoint" }, j = { [q]: "booleanEquals", [r]: [{ [s]: "UseFIPS" }, true] }, k = { [q]: "booleanEquals", [r]: [{ [s]: "UseDualStack" }, true] }, l = {}, m = { [q]: "booleanEquals", [r]: [true, { [q]: "getAttr", [r]: [{ [s]: d }, "supportsFIPS"] }] }, n = { [q]: "booleanEquals", [r]: [true, { [q]: "getAttr", [r]: [{ [s]: d }, "supportsDualStack"] }] }, o = [j], p = [k];
+const _data = { version: "1.0", parameters: { Region: { required: a, type: c }, UseDualStack: h, UseFIPS: h, Endpoint: { required: b, type: c } }, rules: [{ conditions: [{ [q]: "aws.partition", [r]: [{ [s]: "Region" }], assign: d }], type: e, rules: [{ conditions: [{ [q]: "isSet", [r]: [i] }], type: e, rules: [{ conditions: o, error: "Invalid Configuration: FIPS and custom endpoint are not supported", type: f }, { type: e, rules: [{ conditions: p, error: "Invalid Configuration: Dualstack and custom endpoint are not supported", type: f }, { endpoint: { url: i, properties: l, headers: l }, type: g }] }] }, { conditions: [j, k], type: e, rules: [{ conditions: [m, n], type: e, rules: [{ endpoint: { url: "https://transfer-fips.{Region}.{PartitionResult#dualStackDnsSuffix}", properties: l, headers: l }, type: g }] }, { error: "FIPS and DualStack are enabled, but this partition does not support one or both", type: f }] }, { conditions: o, type: e, rules: [{ conditions: [m], type: e, rules: [{ type: e, rules: [{ endpoint: { url: "https://transfer-fips.{Region}.{PartitionResult#dnsSuffix}", properties: l, headers: l }, type: g }] }] }, { error: "FIPS is enabled but this partition does not support FIPS", type: f }] }, { conditions: p, type: e, rules: [{ conditions: [n], type: e, rules: [{ endpoint: { url: "https://transfer.{Region}.{PartitionResult#dualStackDnsSuffix}", properties: l, headers: l }, type: g }] }, { error: "DualStack is enabled but this partition does not support DualStack", type: f }] }, { endpoint: { url: "https://transfer.{Region}.{PartitionResult#dnsSuffix}", properties: l, headers: l }, type: g }] }] };
 exports.ruleSet = _data;

package/dist-cjs/models/models_0.js

@@ -1,6 +1,6 @@
 "use strict";
 Object.defineProperty(exports, "__esModule", { value: true });
-exports.CreateProfileResponseFilterSensitiveLog = exports.CreateProfileRequestFilterSensitiveLog = exports.CreateConnectorResponseFilterSensitiveLog = exports.CreateConnectorRequestFilterSensitiveLog = exports.CreateAgreementResponseFilterSensitiveLog = exports.CreateAgreementRequestFilterSensitiveLog = exports.TagFilterSensitiveLog = exports.CreateAccessResponseFilterSensitiveLog = exports.CreateAccessRequestFilterSensitiveLog = exports.PosixProfileFilterSensitiveLog = exports.HomeDirectoryMapEntryFilterSensitiveLog = exports.CopyStepDetailsFilterSensitiveLog = exports.InputFileLocationFilterSensitiveLog = exports.S3InputFileLocationFilterSensitiveLog = exports.EfsFileLocationFilterSensitiveLog = exports.As2ConnectorConfigFilterSensitiveLog = exports.InvalidNextTokenException = exports.State = exports.ExecutionStatus = exports.ExecutionErrorType = exports.CustomStepStatus = exports.WorkflowStepType = exports.EncryptionType = exports.ThrottlingException = exports.Protocol = exports.TlsSessionResumptionMode = exports.SetStatOption = exports.IdentityProviderType = exports.EndpointType = exports.Domain = exports.ProfileType = exports.ServiceUnavailableException = exports.ResourceNotFoundException = exports.ResourceExistsException = exports.InvalidRequestException = exports.InternalServiceError = exports.HomeDirectoryType = exports.OverwriteExisting = exports.ConflictException = exports.CertificateUsageType = exports.CertificateType = exports.CertificateStatusType = exports.As2Transport = exports.SigningAlg = exports.MdnSigningAlg = exports.MdnResponse = exports.EncryptionAlg = exports.CompressionEnum = exports.AgreementStatusType = exports.AccessDeniedException = void 0;
+exports.CreateProfileResponseFilterSensitiveLog = exports.CreateProfileRequestFilterSensitiveLog = exports.CreateConnectorResponseFilterSensitiveLog = exports.CreateConnectorRequestFilterSensitiveLog = exports.CreateAgreementResponseFilterSensitiveLog = exports.CreateAgreementRequestFilterSensitiveLog = exports.TagFilterSensitiveLog = exports.CreateAccessResponseFilterSensitiveLog = exports.CreateAccessRequestFilterSensitiveLog = exports.PosixProfileFilterSensitiveLog = exports.HomeDirectoryMapEntryFilterSensitiveLog = exports.CopyStepDetailsFilterSensitiveLog = exports.InputFileLocationFilterSensitiveLog = exports.S3InputFileLocationFilterSensitiveLog = exports.EfsFileLocationFilterSensitiveLog = exports.As2ConnectorConfigFilterSensitiveLog = exports.InvalidNextTokenException = exports.State = exports.ExecutionStatus = exports.ExecutionErrorType = exports.CustomStepStatus = exports.WorkflowStepType = exports.EncryptionType = exports.Protocol = exports.TlsSessionResumptionMode = exports.SetStatOption = exports.IdentityProviderType = exports.EndpointType = exports.Domain = exports.ProfileType = exports.ThrottlingException = exports.ServiceUnavailableException = exports.ResourceNotFoundException = exports.ResourceExistsException = exports.InvalidRequestException = exports.InternalServiceError = exports.HomeDirectoryType = exports.OverwriteExisting = exports.ConflictException = exports.CertificateUsageType = exports.CertificateType = exports.CertificateStatusType = exports.As2Transport = exports.SigningAlg = exports.MdnSigningAlg = exports.MdnResponse = exports.EncryptionAlg = exports.CompressionEnum = exports.AgreementStatusType = exports.AccessDeniedException = void 0;
 exports.DescribedProfileFilterSensitiveLog = exports.DescribedHostKeyFilterSensitiveLog = exports.DescribedExecutionFilterSensitiveLog = exports.ServiceMetadataFilterSensitiveLog = exports.UserDetailsFilterSensitiveLog = exports.ExecutionResultsFilterSensitiveLog = exports.ExecutionStepResultFilterSensitiveLog = exports.ExecutionErrorFilterSensitiveLog = exports.LoggingConfigurationFilterSensitiveLog = exports.FileLocationFilterSensitiveLog = exports.S3FileLocationFilterSensitiveLog = exports.DescribeConnectorResponseFilterSensitiveLog = exports.DescribedConnectorFilterSensitiveLog = exports.DescribeConnectorRequestFilterSensitiveLog = exports.DescribeCertificateResponseFilterSensitiveLog = exports.DescribedCertificateFilterSensitiveLog = exports.DescribeCertificateRequestFilterSensitiveLog = exports.DescribeAgreementResponseFilterSensitiveLog = exports.DescribedAgreementFilterSensitiveLog = exports.DescribeAgreementRequestFilterSensitiveLog = exports.DescribeAccessResponseFilterSensitiveLog = exports.DescribedAccessFilterSensitiveLog = exports.DescribeAccessRequestFilterSensitiveLog = exports.DeleteWorkflowRequestFilterSensitiveLog = exports.DeleteUserRequestFilterSensitiveLog = exports.DeleteSshPublicKeyRequestFilterSensitiveLog = exports.DeleteServerRequestFilterSensitiveLog = exports.DeleteProfileRequestFilterSensitiveLog = exports.DeleteHostKeyRequestFilterSensitiveLog = exports.DeleteConnectorRequestFilterSensitiveLog = exports.DeleteCertificateRequestFilterSensitiveLog = exports.DeleteAgreementRequestFilterSensitiveLog = exports.DeleteAccessRequestFilterSensitiveLog = exports.CreateWorkflowResponseFilterSensitiveLog = exports.CreateWorkflowRequestFilterSensitiveLog = exports.WorkflowStepFilterSensitiveLog = exports.TagStepDetailsFilterSensitiveLog = exports.S3TagFilterSensitiveLog = exports.DeleteStepDetailsFilterSensitiveLog = exports.DecryptStepDetailsFilterSensitiveLog = exports.CustomStepDetailsFilterSensitiveLog = exports.CreateUserResponseFilterSensitiveLog = exports.CreateUserRequestFilterSensitiveLog = exports.CreateServerResponseFilterSensitiveLog = exports.CreateServerRequestFilterSensitiveLog = exports.WorkflowDetailsFilterSensitiveLog = exports.WorkflowDetailFilterSensitiveLog = exports.ProtocolDetailsFilterSensitiveLog = exports.IdentityProviderDetailsFilterSensitiveLog = exports.EndpointDetailsFilterSensitiveLog = void 0;
 exports.ListSecurityPoliciesRequestFilterSensitiveLog = exports.ListProfilesResponseFilterSensitiveLog = exports.ListProfilesRequestFilterSensitiveLog = exports.ListHostKeysResponseFilterSensitiveLog = exports.ListHostKeysRequestFilterSensitiveLog = exports.ListExecutionsResponseFilterSensitiveLog = exports.ListExecutionsRequestFilterSensitiveLog = exports.ListedWorkflowFilterSensitiveLog = exports.ListedUserFilterSensitiveLog = exports.ListedServerFilterSensitiveLog = exports.ListedProfileFilterSensitiveLog = exports.ListedHostKeyFilterSensitiveLog = exports.ListedExecutionFilterSensitiveLog = exports.ListConnectorsResponseFilterSensitiveLog = exports.ListedConnectorFilterSensitiveLog = exports.ListConnectorsRequestFilterSensitiveLog = exports.ListCertificatesResponseFilterSensitiveLog = exports.ListedCertificateFilterSensitiveLog = exports.ListCertificatesRequestFilterSensitiveLog = exports.ListAgreementsResponseFilterSensitiveLog = exports.ListedAgreementFilterSensitiveLog = exports.ListAgreementsRequestFilterSensitiveLog = exports.ListAccessesResponseFilterSensitiveLog = exports.ListedAccessFilterSensitiveLog = exports.ListAccessesRequestFilterSensitiveLog = exports.ImportSshPublicKeyResponseFilterSensitiveLog = exports.ImportSshPublicKeyRequestFilterSensitiveLog = exports.ImportHostKeyResponseFilterSensitiveLog = exports.ImportHostKeyRequestFilterSensitiveLog = exports.ImportCertificateResponseFilterSensitiveLog = exports.ImportCertificateRequestFilterSensitiveLog = exports.DescribeWorkflowResponseFilterSensitiveLog = exports.DescribeWorkflowRequestFilterSensitiveLog = exports.DescribeUserResponseFilterSensitiveLog = exports.DescribeUserRequestFilterSensitiveLog = exports.DescribeServerResponseFilterSensitiveLog = exports.DescribeServerRequestFilterSensitiveLog = exports.DescribeSecurityPolicyResponseFilterSensitiveLog = exports.DescribeSecurityPolicyRequestFilterSensitiveLog = exports.DescribeProfileResponseFilterSensitiveLog = exports.DescribeProfileRequestFilterSensitiveLog = exports.DescribeHostKeyResponseFilterSensitiveLog = exports.DescribeHostKeyRequestFilterSensitiveLog = exports.DescribeExecutionResponseFilterSensitiveLog = exports.DescribeExecutionRequestFilterSensitiveLog = exports.DescribedWorkflowFilterSensitiveLog = exports.DescribedUserFilterSensitiveLog = exports.SshPublicKeyFilterSensitiveLog = exports.DescribedServerFilterSensitiveLog = exports.DescribedSecurityPolicyFilterSensitiveLog = void 0;
 exports.UpdateUserResponseFilterSensitiveLog = exports.UpdateUserRequestFilterSensitiveLog = exports.UpdateServerResponseFilterSensitiveLog = exports.UpdateServerRequestFilterSensitiveLog = exports.UpdateProfileResponseFilterSensitiveLog = exports.UpdateProfileRequestFilterSensitiveLog = exports.UpdateHostKeyResponseFilterSensitiveLog = exports.UpdateHostKeyRequestFilterSensitiveLog = exports.UpdateConnectorResponseFilterSensitiveLog = exports.UpdateConnectorRequestFilterSensitiveLog = exports.UpdateCertificateResponseFilterSensitiveLog = exports.UpdateCertificateRequestFilterSensitiveLog = exports.UpdateAgreementResponseFilterSensitiveLog = exports.UpdateAgreementRequestFilterSensitiveLog = exports.UpdateAccessResponseFilterSensitiveLog = exports.UpdateAccessRequestFilterSensitiveLog = exports.UntagResourceRequestFilterSensitiveLog = exports.TestIdentityProviderResponseFilterSensitiveLog = exports.TestIdentityProviderRequestFilterSensitiveLog = exports.TagResourceRequestFilterSensitiveLog = exports.StopServerRequestFilterSensitiveLog = exports.StartServerRequestFilterSensitiveLog = exports.StartFileTransferResponseFilterSensitiveLog = exports.StartFileTransferRequestFilterSensitiveLog = exports.SendWorkflowStepStateResponseFilterSensitiveLog = exports.SendWorkflowStepStateRequestFilterSensitiveLog = exports.ListWorkflowsResponseFilterSensitiveLog = exports.ListWorkflowsRequestFilterSensitiveLog = exports.ListUsersResponseFilterSensitiveLog = exports.ListUsersRequestFilterSensitiveLog = exports.ListTagsForResourceResponseFilterSensitiveLog = exports.ListTagsForResourceRequestFilterSensitiveLog = exports.ListServersResponseFilterSensitiveLog = exports.ListServersRequestFilterSensitiveLog = exports.ListSecurityPoliciesResponseFilterSensitiveLog = void 0;
@@ -177,6 +177,20 @@ class ServiceUnavailableException extends TransferServiceException_1.TransferSer
     }
 }
 exports.ServiceUnavailableException = ServiceUnavailableException;
+class ThrottlingException extends TransferServiceException_1.TransferServiceException {
+    constructor(opts) {
+        super({
+            name: "ThrottlingException",
+            $fault: "client",
+            ...opts,
+        });
+        this.name = "ThrottlingException";
+        this.$fault = "client";
+        Object.setPrototypeOf(this, ThrottlingException.prototype);
+        this.RetryAfterSeconds = opts.RetryAfterSeconds;
+    }
+}
+exports.ThrottlingException = ThrottlingException;
 var ProfileType;
 (function (ProfileType) {
     ProfileType["LOCAL"] = "LOCAL";
@@ -218,20 +232,6 @@ var Protocol;
     Protocol["FTPS"] = "FTPS";
     Protocol["SFTP"] = "SFTP";
 })(Protocol = exports.Protocol || (exports.Protocol = {}));
-class ThrottlingException extends TransferServiceException_1.TransferServiceException {
-    constructor(opts) {
-        super({
-            name: "ThrottlingException",
-            $fault: "client",
-            ...opts,
-        });
-        this.name = "ThrottlingException";
-        this.$fault = "client";
-        Object.setPrototypeOf(this, ThrottlingException.prototype);
-        this.RetryAfterSeconds = opts.RetryAfterSeconds;
-    }
-}
-exports.ThrottlingException = ThrottlingException;
 var EncryptionType;
 (function (EncryptionType) {
     EncryptionType["PGP"] = "PGP";

package/dist-cjs/protocols/Aws_json1_1.js

@@ -669,6 +669,9 @@ const deserializeAws_json1_1CreateAgreementCommandError = async (output, context
         case "ServiceUnavailableException":
         case "com.amazonaws.transfer#ServiceUnavailableException":
             throw await deserializeAws_json1_1ServiceUnavailableExceptionResponse(parsedOutput, context);
+        case "ThrottlingException":
+        case "com.amazonaws.transfer#ThrottlingException":
+            throw await deserializeAws_json1_1ThrottlingExceptionResponse(parsedOutput, context);
         default:
             const parsedBody = parsedOutput.body;
             (0, smithy_client_1.throwDefaultError)({
@@ -715,6 +718,9 @@ const deserializeAws_json1_1CreateConnectorCommandError = async (output, context
         case "ServiceUnavailableException":
         case "com.amazonaws.transfer#ServiceUnavailableException":
             throw await deserializeAws_json1_1ServiceUnavailableExceptionResponse(parsedOutput, context);
+        case "ThrottlingException":
+        case "com.amazonaws.transfer#ThrottlingException":
+            throw await deserializeAws_json1_1ThrottlingExceptionResponse(parsedOutput, context);
         default:
             const parsedBody = parsedOutput.body;
             (0, smithy_client_1.throwDefaultError)({
@@ -758,6 +764,9 @@ const deserializeAws_json1_1CreateProfileCommandError = async (output, context)
         case "ServiceUnavailableException":
         case "com.amazonaws.transfer#ServiceUnavailableException":
             throw await deserializeAws_json1_1ServiceUnavailableExceptionResponse(parsedOutput, context);
+        case "ThrottlingException":
+        case "com.amazonaws.transfer#ThrottlingException":
+            throw await deserializeAws_json1_1ThrottlingExceptionResponse(parsedOutput, context);
         default:
             const parsedBody = parsedOutput.body;
             (0, smithy_client_1.throwDefaultError)({
@@ -2821,6 +2830,9 @@ const deserializeAws_json1_1UpdateAccessCommandError = async (output, context) =
         case "ServiceUnavailableException":
         case "com.amazonaws.transfer#ServiceUnavailableException":
             throw await deserializeAws_json1_1ServiceUnavailableExceptionResponse(parsedOutput, context);
+        case "ThrottlingException":
+        case "com.amazonaws.transfer#ThrottlingException":
+            throw await deserializeAws_json1_1ThrottlingExceptionResponse(parsedOutput, context);
         default:
             const parsedBody = parsedOutput.body;
             (0, smithy_client_1.throwDefaultError)({
@@ -2867,6 +2879,9 @@ const deserializeAws_json1_1UpdateAgreementCommandError = async (output, context
         case "ServiceUnavailableException":
         case "com.amazonaws.transfer#ServiceUnavailableException":
             throw await deserializeAws_json1_1ServiceUnavailableExceptionResponse(parsedOutput, context);
+        case "ThrottlingException":
+        case "com.amazonaws.transfer#ThrottlingException":
+            throw await deserializeAws_json1_1ThrottlingExceptionResponse(parsedOutput, context);
         default:
             const parsedBody = parsedOutput.body;
             (0, smithy_client_1.throwDefaultError)({
@@ -2910,6 +2925,9 @@ const deserializeAws_json1_1UpdateCertificateCommandError = async (output, conte
         case "ServiceUnavailableException":
         case "com.amazonaws.transfer#ServiceUnavailableException":
             throw await deserializeAws_json1_1ServiceUnavailableExceptionResponse(parsedOutput, context);
+        case "ThrottlingException":
+        case "com.amazonaws.transfer#ThrottlingException":
+            throw await deserializeAws_json1_1ThrottlingExceptionResponse(parsedOutput, context);
         default:
             const parsedBody = parsedOutput.body;
             (0, smithy_client_1.throwDefaultError)({
@@ -2956,6 +2974,9 @@ const deserializeAws_json1_1UpdateConnectorCommandError = async (output, context
         case "ServiceUnavailableException":
         case "com.amazonaws.transfer#ServiceUnavailableException":
             throw await deserializeAws_json1_1ServiceUnavailableExceptionResponse(parsedOutput, context);
+        case "ThrottlingException":
+        case "com.amazonaws.transfer#ThrottlingException":
+            throw await deserializeAws_json1_1ThrottlingExceptionResponse(parsedOutput, context);
         default:
             const parsedBody = parsedOutput.body;
             (0, smithy_client_1.throwDefaultError)({
@@ -3045,6 +3066,9 @@ const deserializeAws_json1_1UpdateProfileCommandError = async (output, context)
         case "ServiceUnavailableException":
         case "com.amazonaws.transfer#ServiceUnavailableException":
             throw await deserializeAws_json1_1ServiceUnavailableExceptionResponse(parsedOutput, context);
+        case "ThrottlingException":
+        case "com.amazonaws.transfer#ThrottlingException":
+            throw await deserializeAws_json1_1ThrottlingExceptionResponse(parsedOutput, context);
         default:
             const parsedBody = parsedOutput.body;
             (0, smithy_client_1.throwDefaultError)({

package/dist-es/endpoint/ruleset.js

@@ -1,4 +1,4 @@
-const r = "fn", s = "argv", t = "ref";
-const a = true, b = false, c = "String", d = "PartitionResult", e = "tree", f = "error", g = "endpoint", h = { "required": true, "default": false, "type": "Boolean" }, i = { [t]: "Endpoint" }, j = { [r]: "booleanEquals", [s]: [{ [t]: "UseFIPS" }, true] }, k = { [r]: "booleanEquals", [s]: [{ [t]: "UseDualStack" }, true] }, l = {}, m = { [r]: "booleanEquals", [s]: [true, { [r]: "getAttr", [s]: [{ [t]: d }, "supportsFIPS"] }] }, n = { [r]: "booleanEquals", [s]: [true, { [r]: "getAttr", [s]: [{ [t]: d }, "supportsDualStack"] }] }, o = [i], p = [j], q = [k];
-const _data = { version: "1.0", parameters: { Region: { required: a, type: c }, UseDualStack: h, UseFIPS: h, Endpoint: { required: b, type: c } }, rules: [{ conditions: [{ [r]: "aws.partition", [s]: [{ [t]: "Region" }], assign: d }], type: e, rules: [{ conditions: [{ [r]: "isSet", [s]: o }, { [r]: "parseURL", [s]: o, assign: "url" }], type: e, rules: [{ conditions: p, error: "Invalid Configuration: FIPS and custom endpoint are not supported", type: f }, { type: e, rules: [{ conditions: q, error: "Invalid Configuration: Dualstack and custom endpoint are not supported", type: f }, { endpoint: { url: i, properties: l, headers: l }, type: g }] }] }, { conditions: [j, k], type: e, rules: [{ conditions: [m, n], type: e, rules: [{ endpoint: { url: "https://transfer-fips.{Region}.{PartitionResult#dualStackDnsSuffix}", properties: l, headers: l }, type: g }] }, { error: "FIPS and DualStack are enabled, but this partition does not support one or both", type: f }] }, { conditions: p, type: e, rules: [{ conditions: [m], type: e, rules: [{ type: e, rules: [{ endpoint: { url: "https://transfer-fips.{Region}.{PartitionResult#dnsSuffix}", properties: l, headers: l }, type: g }] }] }, { error: "FIPS is enabled but this partition does not support FIPS", type: f }] }, { conditions: q, type: e, rules: [{ conditions: [n], type: e, rules: [{ endpoint: { url: "https://transfer.{Region}.{PartitionResult#dualStackDnsSuffix}", properties: l, headers: l }, type: g }] }, { error: "DualStack is enabled but this partition does not support DualStack", type: f }] }, { endpoint: { url: "https://transfer.{Region}.{PartitionResult#dnsSuffix}", properties: l, headers: l }, type: g }] }] };
+const q = "fn", r = "argv", s = "ref";
+const a = true, b = false, c = "String", d = "PartitionResult", e = "tree", f = "error", g = "endpoint", h = { "required": true, "default": false, "type": "Boolean" }, i = { [s]: "Endpoint" }, j = { [q]: "booleanEquals", [r]: [{ [s]: "UseFIPS" }, true] }, k = { [q]: "booleanEquals", [r]: [{ [s]: "UseDualStack" }, true] }, l = {}, m = { [q]: "booleanEquals", [r]: [true, { [q]: "getAttr", [r]: [{ [s]: d }, "supportsFIPS"] }] }, n = { [q]: "booleanEquals", [r]: [true, { [q]: "getAttr", [r]: [{ [s]: d }, "supportsDualStack"] }] }, o = [j], p = [k];
+const _data = { version: "1.0", parameters: { Region: { required: a, type: c }, UseDualStack: h, UseFIPS: h, Endpoint: { required: b, type: c } }, rules: [{ conditions: [{ [q]: "aws.partition", [r]: [{ [s]: "Region" }], assign: d }], type: e, rules: [{ conditions: [{ [q]: "isSet", [r]: [i] }], type: e, rules: [{ conditions: o, error: "Invalid Configuration: FIPS and custom endpoint are not supported", type: f }, { type: e, rules: [{ conditions: p, error: "Invalid Configuration: Dualstack and custom endpoint are not supported", type: f }, { endpoint: { url: i, properties: l, headers: l }, type: g }] }] }, { conditions: [j, k], type: e, rules: [{ conditions: [m, n], type: e, rules: [{ endpoint: { url: "https://transfer-fips.{Region}.{PartitionResult#dualStackDnsSuffix}", properties: l, headers: l }, type: g }] }, { error: "FIPS and DualStack are enabled, but this partition does not support one or both", type: f }] }, { conditions: o, type: e, rules: [{ conditions: [m], type: e, rules: [{ type: e, rules: [{ endpoint: { url: "https://transfer-fips.{Region}.{PartitionResult#dnsSuffix}", properties: l, headers: l }, type: g }] }] }, { error: "FIPS is enabled but this partition does not support FIPS", type: f }] }, { conditions: p, type: e, rules: [{ conditions: [n], type: e, rules: [{ endpoint: { url: "https://transfer.{Region}.{PartitionResult#dualStackDnsSuffix}", properties: l, headers: l }, type: g }] }, { error: "DualStack is enabled but this partition does not support DualStack", type: f }] }, { endpoint: { url: "https://transfer.{Region}.{PartitionResult#dnsSuffix}", properties: l, headers: l }, type: g }] }] };
 export const ruleSet = _data;

package/dist-es/models/models_0.js

@@ -164,6 +164,19 @@ export class ServiceUnavailableException extends __BaseException {
         this.Message = opts.Message;
     }
 }
+export class ThrottlingException extends __BaseException {
+    constructor(opts) {
+        super({
+            name: "ThrottlingException",
+            $fault: "client",
+            ...opts,
+        });
+        this.name = "ThrottlingException";
+        this.$fault = "client";
+        Object.setPrototypeOf(this, ThrottlingException.prototype);
+        this.RetryAfterSeconds = opts.RetryAfterSeconds;
+    }
+}
 export var ProfileType;
 (function (ProfileType) {
     ProfileType["LOCAL"] = "LOCAL";
@@ -205,19 +218,6 @@ export var Protocol;
     Protocol["FTPS"] = "FTPS";
     Protocol["SFTP"] = "SFTP";
 })(Protocol || (Protocol = {}));
-export class ThrottlingException extends __BaseException {
-    constructor(opts) {
-        super({
-            name: "ThrottlingException",
-            $fault: "client",
-            ...opts,
-        });
-        this.name = "ThrottlingException";
-        this.$fault = "client";
-        Object.setPrototypeOf(this, ThrottlingException.prototype);
-        this.RetryAfterSeconds = opts.RetryAfterSeconds;
-    }
-}
 export var EncryptionType;
 (function (EncryptionType) {
     EncryptionType["PGP"] = "PGP";

package/dist-es/protocols/Aws_json1_1.js

@@ -604,6 +604,9 @@ const deserializeAws_json1_1CreateAgreementCommandError = async (output, context
         case "ServiceUnavailableException":
         case "com.amazonaws.transfer#ServiceUnavailableException":
             throw await deserializeAws_json1_1ServiceUnavailableExceptionResponse(parsedOutput, context);
+        case "ThrottlingException":
+        case "com.amazonaws.transfer#ThrottlingException":
+            throw await deserializeAws_json1_1ThrottlingExceptionResponse(parsedOutput, context);
         default:
             const parsedBody = parsedOutput.body;
             throwDefaultError({
@@ -649,6 +652,9 @@ const deserializeAws_json1_1CreateConnectorCommandError = async (output, context
         case "ServiceUnavailableException":
         case "com.amazonaws.transfer#ServiceUnavailableException":
             throw await deserializeAws_json1_1ServiceUnavailableExceptionResponse(parsedOutput, context);
+        case "ThrottlingException":
+        case "com.amazonaws.transfer#ThrottlingException":
+            throw await deserializeAws_json1_1ThrottlingExceptionResponse(parsedOutput, context);
         default:
             const parsedBody = parsedOutput.body;
             throwDefaultError({
@@ -691,6 +697,9 @@ const deserializeAws_json1_1CreateProfileCommandError = async (output, context)
         case "ServiceUnavailableException":
         case "com.amazonaws.transfer#ServiceUnavailableException":
             throw await deserializeAws_json1_1ServiceUnavailableExceptionResponse(parsedOutput, context);
+        case "ThrottlingException":
+        case "com.amazonaws.transfer#ThrottlingException":
+            throw await deserializeAws_json1_1ThrottlingExceptionResponse(parsedOutput, context);
         default:
             const parsedBody = parsedOutput.body;
             throwDefaultError({
@@ -2707,6 +2716,9 @@ const deserializeAws_json1_1UpdateAccessCommandError = async (output, context) =
         case "ServiceUnavailableException":
         case "com.amazonaws.transfer#ServiceUnavailableException":
             throw await deserializeAws_json1_1ServiceUnavailableExceptionResponse(parsedOutput, context);
+        case "ThrottlingException":
+        case "com.amazonaws.transfer#ThrottlingException":
+            throw await deserializeAws_json1_1ThrottlingExceptionResponse(parsedOutput, context);
         default:
             const parsedBody = parsedOutput.body;
             throwDefaultError({
@@ -2752,6 +2764,9 @@ const deserializeAws_json1_1UpdateAgreementCommandError = async (output, context
         case "ServiceUnavailableException":
         case "com.amazonaws.transfer#ServiceUnavailableException":
             throw await deserializeAws_json1_1ServiceUnavailableExceptionResponse(parsedOutput, context);
+        case "ThrottlingException":
+        case "com.amazonaws.transfer#ThrottlingException":
+            throw await deserializeAws_json1_1ThrottlingExceptionResponse(parsedOutput, context);
         default:
             const parsedBody = parsedOutput.body;
             throwDefaultError({
@@ -2794,6 +2809,9 @@ const deserializeAws_json1_1UpdateCertificateCommandError = async (output, conte
         case "ServiceUnavailableException":
         case "com.amazonaws.transfer#ServiceUnavailableException":
             throw await deserializeAws_json1_1ServiceUnavailableExceptionResponse(parsedOutput, context);
+        case "ThrottlingException":
+        case "com.amazonaws.transfer#ThrottlingException":
+            throw await deserializeAws_json1_1ThrottlingExceptionResponse(parsedOutput, context);
         default:
             const parsedBody = parsedOutput.body;
             throwDefaultError({
@@ -2839,6 +2857,9 @@ const deserializeAws_json1_1UpdateConnectorCommandError = async (output, context
         case "ServiceUnavailableException":
         case "com.amazonaws.transfer#ServiceUnavailableException":
             throw await deserializeAws_json1_1ServiceUnavailableExceptionResponse(parsedOutput, context);
+        case "ThrottlingException":
+        case "com.amazonaws.transfer#ThrottlingException":
+            throw await deserializeAws_json1_1ThrottlingExceptionResponse(parsedOutput, context);
         default:
             const parsedBody = parsedOutput.body;
             throwDefaultError({
@@ -2926,6 +2947,9 @@ const deserializeAws_json1_1UpdateProfileCommandError = async (output, context)
         case "ServiceUnavailableException":
         case "com.amazonaws.transfer#ServiceUnavailableException":
             throw await deserializeAws_json1_1ServiceUnavailableExceptionResponse(parsedOutput, context);
+        case "ThrottlingException":
+        case "com.amazonaws.transfer#ThrottlingException":
+            throw await deserializeAws_json1_1ThrottlingExceptionResponse(parsedOutput, context);
         default:
             const parsedBody = parsedOutput.body;
             throwDefaultError({

package/dist-types/Transfer.d.ts

@@ -177,7 +177,6 @@ export declare class Transfer extends TransferClient {
     deleteProfile(args: DeleteProfileCommandInput, options: __HttpHandlerOptions, cb: (err: any, data?: DeleteProfileCommandOutput) => void): void;
     /**
      * <p>Deletes the file transfer protocol-enabled server that you specify.</p>
-     *
      *          <p>No response returns from this operation.</p>
      */
     deleteServer(args: DeleteServerCommandInput, options?: __HttpHandlerOptions): Promise<DeleteServerCommandOutput>;
@@ -191,9 +190,7 @@ export declare class Transfer extends TransferClient {
     deleteSshPublicKey(args: DeleteSshPublicKeyCommandInput, options: __HttpHandlerOptions, cb: (err: any, data?: DeleteSshPublicKeyCommandOutput) => void): void;
     /**
      * <p>Deletes the user belonging to a file transfer protocol-enabled server you specify.</p>
-     *
      *          <p>No response returns from this operation.</p>
-     *
      *          <note>
      *             <p>When you delete a user from a server, the user's information is lost.</p>
      *          </note>
@@ -211,7 +208,6 @@ export declare class Transfer extends TransferClient {
      * <p>Describes the access that is assigned to the specific file transfer protocol-enabled
      *       server, as identified by its <code>ServerId</code> property and its
      *       <code>ExternalId</code>.</p>
-     *
      *          <p>The response from this call returns the properties of the access that is associated with
      *       the <code>ServerId</code> value that was specified.</p>
      */
@@ -267,7 +263,6 @@ export declare class Transfer extends TransferClient {
     /**
      * <p>Describes a file transfer protocol-enabled server that you specify by passing the
      *         <code>ServerId</code> parameter.</p>
-     *
      *          <p>The response contains a description of a server's properties. When you set
      *         <code>EndpointType</code> to VPC, the response will contain the
      *       <code>EndpointDetails</code>.</p>
@@ -278,7 +273,6 @@ export declare class Transfer extends TransferClient {
     /**
      * <p>Describes the user assigned to the specific file transfer protocol-enabled server, as
      *       identified by its <code>ServerId</code> property.</p>
-     *
      *          <p>The response from this call returns the properties of the user associated with the
      *         <code>ServerId</code> value that was specified.</p>
      */
@@ -310,7 +304,6 @@ export declare class Transfer extends TransferClient {
      * <p>Adds a Secure Shell (SSH) public key to a user account identified by a
      *         <code>UserName</code> value assigned to the specific file transfer protocol-enabled server,
      *       identified by <code>ServerId</code>.</p>
-     *
      *          <p>The response returns the <code>UserName</code> value, the <code>ServerId</code> value, and
      *       the name of the <code>SshPublicKeyId</code>.</p>
      */
@@ -426,11 +419,9 @@ export declare class Transfer extends TransferClient {
      * <p>Changes the state of a file transfer protocol-enabled server from <code>OFFLINE</code> to
      *         <code>ONLINE</code>. It has no impact on a server that is already <code>ONLINE</code>. An
      *         <code>ONLINE</code> server can accept and process file transfer jobs.</p>
-     *
      *          <p>The state of <code>STARTING</code> indicates that the server is in an intermediate state,
      *       either not fully able to respond, or not fully online. The values of <code>START_FAILED</code>
      *       can indicate an error condition.</p>
-     *
      *          <p>No response is returned from this call.</p>
      */
     startServer(args: StartServerCommandInput, options?: __HttpHandlerOptions): Promise<StartServerCommandOutput>;
@@ -441,16 +432,13 @@ export declare class Transfer extends TransferClient {
      *         <code>OFFLINE</code>. An <code>OFFLINE</code> server cannot accept and process file transfer
      *       jobs. Information tied to your server, such as server and user properties, are not affected by
      *       stopping your server.</p>
-     *
      *          <note>
      *             <p>Stopping the server does not reduce or impact your file transfer protocol endpoint
      *         billing; you must delete the server to stop being billed.</p>
      *          </note>
-     *
      *          <p>The state of <code>STOPPING</code> indicates that the server is in an intermediate state,
      *       either not fully able to respond, or not fully offline. The values of <code>STOP_FAILED</code>
      *       can indicate an error condition.</p>
-     *
      *          <p>No response is returned from this call.</p>
      */
     stopServer(args: StopServerCommandInput, options?: __HttpHandlerOptions): Promise<StopServerCommandOutput>;
@@ -459,7 +447,6 @@ export declare class Transfer extends TransferClient {
     /**
      * <p>Attaches a key-value pair to a resource, as identified by its Amazon Resource Name (ARN).
      *       Resources are users, servers, roles, and other entities.</p>
-     *
      *          <p>There is no response returned from this call.</p>
      */
     tagResource(args: TagResourceCommandInput, options?: __HttpHandlerOptions): Promise<TagResourceCommandOutput>;
@@ -512,7 +499,6 @@ export declare class Transfer extends TransferClient {
     /**
      * <p>Detaches a key-value pair from a resource, as identified by its Amazon Resource Name
      *       (ARN). Resources are users, servers, roles, and other entities.</p>
-     *
      *          <p>No response is returned from this call.</p>
      */
     untagResource(args: UntagResourceCommandInput, options?: __HttpHandlerOptions): Promise<UntagResourceCommandOutput>;
@@ -565,7 +551,6 @@ export declare class Transfer extends TransferClient {
     /**
      * <p>Updates the file transfer protocol-enabled server's properties after that server has
      *       been created.</p>
-     *
      *          <p>The <code>UpdateServer</code> call returns the <code>ServerId</code> of the server you
      *       updated.</p>
      */
@@ -576,7 +561,6 @@ export declare class Transfer extends TransferClient {
      * <p>Assigns new properties to a user. Parameters you pass modify any or all of the following:
      *       the home directory, role, and policy for the <code>UserName</code> and <code>ServerId</code>
      *       you specify.</p>
-     *
      *          <p>The response returns the <code>ServerId</code> and the <code>UserName</code> for the
      *       updated user.</p>
      */

package/dist-types/commands/DeleteServerCommand.d.ts

@@ -9,7 +9,6 @@ export interface DeleteServerCommandOutput extends __MetadataBearer {
 }
 /**
  * <p>Deletes the file transfer protocol-enabled server that you specify.</p>
- *
  *          <p>No response returns from this operation.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

package/dist-types/commands/DeleteUserCommand.d.ts

@@ -9,9 +9,7 @@ export interface DeleteUserCommandOutput extends __MetadataBearer {
 }
 /**
  * <p>Deletes the user belonging to a file transfer protocol-enabled server you specify.</p>
- *
  *          <p>No response returns from this operation.</p>
- *
  *          <note>
  *             <p>When you delete a user from a server, the user's information is lost.</p>
  *          </note>

package/dist-types/commands/DescribeAccessCommand.d.ts

@@ -11,7 +11,6 @@ export interface DescribeAccessCommandOutput extends DescribeAccessResponse, __M
  * <p>Describes the access that is assigned to the specific file transfer protocol-enabled
  *       server, as identified by its <code>ServerId</code> property and its
  *       <code>ExternalId</code>.</p>
- *
  *          <p>The response from this call returns the properties of the access that is associated with
  *       the <code>ServerId</code> value that was specified.</p>
  * @example

package/dist-types/commands/DescribeServerCommand.d.ts

@@ -10,7 +10,6 @@ export interface DescribeServerCommandOutput extends DescribeServerResponse, __M
 /**
  * <p>Describes a file transfer protocol-enabled server that you specify by passing the
  *         <code>ServerId</code> parameter.</p>
- *
  *          <p>The response contains a description of a server's properties. When you set
  *         <code>EndpointType</code> to VPC, the response will contain the
  *       <code>EndpointDetails</code>.</p>

package/dist-types/commands/DescribeUserCommand.d.ts

@@ -10,7 +10,6 @@ export interface DescribeUserCommandOutput extends DescribeUserResponse, __Metad
 /**
  * <p>Describes the user assigned to the specific file transfer protocol-enabled server, as
  *       identified by its <code>ServerId</code> property.</p>
- *
  *          <p>The response from this call returns the properties of the user associated with the
  *         <code>ServerId</code> value that was specified.</p>
  * @example

package/dist-types/commands/ImportSshPublicKeyCommand.d.ts

@@ -11,7 +11,6 @@ export interface ImportSshPublicKeyCommandOutput extends ImportSshPublicKeyRespo
  * <p>Adds a Secure Shell (SSH) public key to a user account identified by a
  *         <code>UserName</code> value assigned to the specific file transfer protocol-enabled server,
  *       identified by <code>ServerId</code>.</p>
- *
  *          <p>The response returns the <code>UserName</code> value, the <code>ServerId</code> value, and
  *       the name of the <code>SshPublicKeyId</code>.</p>
  * @example

package/dist-types/commands/StartServerCommand.d.ts

@@ -11,11 +11,9 @@ export interface StartServerCommandOutput extends __MetadataBearer {
  * <p>Changes the state of a file transfer protocol-enabled server from <code>OFFLINE</code> to
  *         <code>ONLINE</code>. It has no impact on a server that is already <code>ONLINE</code>. An
  *         <code>ONLINE</code> server can accept and process file transfer jobs.</p>
- *
  *          <p>The state of <code>STARTING</code> indicates that the server is in an intermediate state,
  *       either not fully able to respond, or not fully online. The values of <code>START_FAILED</code>
  *       can indicate an error condition.</p>
- *
  *          <p>No response is returned from this call.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

package/dist-types/commands/StopServerCommand.d.ts

@@ -12,16 +12,13 @@ export interface StopServerCommandOutput extends __MetadataBearer {
  *         <code>OFFLINE</code>. An <code>OFFLINE</code> server cannot accept and process file transfer
  *       jobs. Information tied to your server, such as server and user properties, are not affected by
  *       stopping your server.</p>
- *
  *          <note>
  *             <p>Stopping the server does not reduce or impact your file transfer protocol endpoint
  *         billing; you must delete the server to stop being billed.</p>
  *          </note>
- *
  *          <p>The state of <code>STOPPING</code> indicates that the server is in an intermediate state,
  *       either not fully able to respond, or not fully offline. The values of <code>STOP_FAILED</code>
  *       can indicate an error condition.</p>
- *
  *          <p>No response is returned from this call.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

package/dist-types/commands/TagResourceCommand.d.ts

@@ -10,7 +10,6 @@ export interface TagResourceCommandOutput extends __MetadataBearer {
 /**
  * <p>Attaches a key-value pair to a resource, as identified by its Amazon Resource Name (ARN).
  *       Resources are users, servers, roles, and other entities.</p>
- *
  *          <p>There is no response returned from this call.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

package/dist-types/commands/UntagResourceCommand.d.ts

@@ -10,7 +10,6 @@ export interface UntagResourceCommandOutput extends __MetadataBearer {
 /**
  * <p>Detaches a key-value pair from a resource, as identified by its Amazon Resource Name
  *       (ARN). Resources are users, servers, roles, and other entities.</p>
- *
  *          <p>No response is returned from this call.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

package/dist-types/commands/UpdateServerCommand.d.ts

@@ -10,7 +10,6 @@ export interface UpdateServerCommandOutput extends UpdateServerResponse, __Metad
 /**
  * <p>Updates the file transfer protocol-enabled server's properties after that server has
  *       been created.</p>
- *
  *          <p>The <code>UpdateServer</code> call returns the <code>ServerId</code> of the server you
  *       updated.</p>
  * @example

package/dist-types/commands/UpdateUserCommand.d.ts

@@ -11,7 +11,6 @@ export interface UpdateUserCommandOutput extends UpdateUserResponse, __MetadataB
  * <p>Assigns new properties to a user. Parameters you pass modify any or all of the following:
  *       the home directory, role, and policy for the <code>UserName</code> and <code>ServerId</code>
  *       you specify.</p>
- *
  *          <p>The response returns the <code>ServerId</code> and the <code>UserName</code> for the
  *       updated user.</p>
  * @example

package/dist-types/models/models_0.d.ts

@@ -130,7 +130,6 @@ export declare class ConflictException extends __BaseException {
 /**
  * <p>Reserved for future use.</p>
  *          <p>
- *
  *     </p>
  */
 export interface EfsFileLocation {
@@ -301,7 +300,6 @@ export interface CreateAccessRequest {
      * <p>A session policy for your user so that you can use the same Identity and Access Management (IAM) role across multiple users. This policy scopes down a user's
      *      access to portions of their Amazon S3 bucket. Variables that you can use inside this policy include <code>${Transfer:UserName}</code>,
      *      <code>${Transfer:HomeDirectory}</code>, and <code>${Transfer:HomeBucket}</code>.</p>
-     *
      *          <note>
      *             <p>This policy applies only when the domain of <code>ServerId</code> is Amazon S3. Amazon EFS does not use session policies.</p>
      *             <p>For session policies, Transfer Family stores the policy as a JSON blob, instead
@@ -338,13 +336,10 @@ export interface CreateAccessRequest {
      *     The users of the group that you associate have access to your Amazon S3 or Amazon EFS
      *     resources over the enabled protocols using Transfer Family. If you know the group name,
      *     you can view the SID values by running the following command using Windows PowerShell.</p>
-     *
      *          <p>
      *             <code>Get-ADGroup -Filter {samAccountName -like "<i>YourGroupName</i>*"} -Properties * | Select SamAccountName,ObjectSid</code>
      *          </p>
-     *
      *          <p>In that command, replace <i>YourGroupName</i> with the name of your Active Directory group.</p>
-     *
      *          <p>The regular expression used to validate this parameter is a string of characters consisting of uppercase and lowercase alphanumeric characters with no spaces.
      *     You can also include underscores or any of the following characters: =,.@:/-</p>
      */
@@ -498,6 +493,18 @@ export interface CreateAgreementResponse {
      */
     AgreementId: string | undefined;
 }
+/**
+ * <p>The request was denied due to request throttling.</p>
+ */
+export declare class ThrottlingException extends __BaseException {
+    readonly name: "ThrottlingException";
+    readonly $fault: "client";
+    RetryAfterSeconds?: string;
+    /**
+     * @internal
+     */
+    constructor(opts: __ExceptionOptionType<ThrottlingException, __BaseException>);
+}
 export interface CreateConnectorRequest {
     /**
      * <p>The URL of the partner's AS2 endpoint.</p>
@@ -593,7 +600,6 @@ export declare enum Domain {
  *       <code>EndpointType=VPC_ENDPOINT</code> in your Amazon Web Servicesaccount on or before May 19, 2021,
  *         you will not be affected. After this date, use
  *         <code>EndpointType</code>=<code>VPC</code>.</p>
- *
  *             <p>For more information, see
  *         https://docs.aws.amazon.com/transfer/latest/userguide/create-server-in-vpc.html#deprecate-vpc-endpoint.</p>
  *          </note>
@@ -602,9 +608,7 @@ export interface EndpointDetails {
     /**
      * <p>A list of address allocation IDs that are required to attach an Elastic IP address to your
      *       server's endpoint.</p>
-     *
      *          <note>
-     *
      *             <p>This property can only be set when <code>EndpointType</code> is set to <code>VPC</code>
      *         and it is only valid in the <code>UpdateServer</code> API.</p>
      *          </note>
@@ -612,7 +616,6 @@ export interface EndpointDetails {
     AddressAllocationIds?: string[];
     /**
      * <p>A list of subnet IDs that are required to host your server endpoint in your VPC.</p>
-     *
      *          <note>
      *             <p>This property can only be set when <code>EndpointType</code> is set to
      *         <code>VPC</code>.</p>
@@ -621,11 +624,9 @@ export interface EndpointDetails {
     SubnetIds?: string[];
     /**
      * <p>The identifier of the VPC endpoint.</p>
-     *
      *          <note>
      *             <p>This property can only be set when <code>EndpointType</code> is set to
      *           <code>VPC_ENDPOINT</code>.</p>
-     *
      *             <p>For more information, see
      *         https://docs.aws.amazon.com/transfer/latest/userguide/create-server-in-vpc.html#deprecate-vpc-endpoint.</p>
      *          </note>
@@ -633,7 +634,6 @@ export interface EndpointDetails {
     VpcEndpointId?: string;
     /**
      * <p>The VPC identifier of the VPC in which a server's endpoint will be hosted.</p>
-     *
      *          <note>
      *             <p>This property can only be set when <code>EndpointType</code> is set to
      *         <code>VPC</code>.</p>
@@ -643,11 +643,9 @@ export interface EndpointDetails {
     /**
      * <p>A list of security groups IDs that are available to attach to your server's
      *       endpoint.</p>
-     *
      *          <note>
      *             <p>This property can only be set when <code>EndpointType</code> is set to
      *         <code>VPC</code>.</p>
-     *
      *             <p>You can edit the <code>SecurityGroupIds</code> property in the <a href="https://docs.aws.amazon.com/transfer/latest/userguide/API_UpdateServer.html">UpdateServer</a> API only if you are changing the <code>EndpointType</code> from
      *           <code>PUBLIC</code> or <code>VPC_ENDPOINT</code> to <code>VPC</code>. To change security
      *         groups associated with your server's VPC endpoint after creation, use the Amazon EC2
@@ -724,7 +722,6 @@ export interface ProtocolDetails {
      *          <p>
      *             <i>Special values</i>
      *          </p>
-     *
      *          <p>The <code>AUTO</code> and <code>0.0.0.0</code> are special values for the <code>PassiveIp</code> parameter. The value <code>PassiveIp=AUTO</code>
      *       is assigned by default to FTP and FTPS type servers. In this case, the server automatically responds with one of the endpoint IPs within the PASV response.
      *       <code>PassiveIp=0.0.0.0</code> has a more unique application for its usage. For example, if you have a High Availability (HA) Network Load Balancer (NLB) environment,
@@ -829,20 +826,15 @@ export interface CreateServerRequest {
     /**
      * <p>The Amazon Resource Name (ARN) of the Certificate Manager (ACM) certificate. Required
      *       when <code>Protocols</code> is set to <code>FTPS</code>.</p>
-     *
      *          <p>To request a new public certificate, see <a href="https://docs.aws.amazon.com/acm/latest/userguide/gs-acm-request-public.html">Request a public certificate</a>
      *       in the <i>Certificate Manager User Guide</i>.</p>
-     *
      *          <p>To import an existing certificate into ACM, see <a href="https://docs.aws.amazon.com/acm/latest/userguide/import-certificate.html">Importing certificates into ACM</a>
      *       in the <i>Certificate Manager User Guide</i>.</p>
-     *
      *          <p>To request a private certificate to use FTPS through private IP addresses, see <a href="https://docs.aws.amazon.com/acm/latest/userguide/gs-acm-request-private.html">Request a
      *         private certificate</a> in the <i>Certificate Manager User
      *       Guide</i>.</p>
-     *
      *          <p>Certificates with the following cryptographic algorithms and key sizes are
      *       supported:</p>
-     *
      *          <ul>
      *             <li>
      *                <p>2048-bit RSA (RSA_2048)</p>
@@ -860,7 +852,6 @@ export interface CreateServerRequest {
      *                <p>Elliptic Prime Curve 521 bit (EC_secp521r1)</p>
      *             </li>
      *          </ul>
-     *
      *          <note>
      *             <p>The certificate must be a valid SSL/TLS X.509 version 3 certificate with FQDN or IP
      *         address specified and information about the issuer.</p>
@@ -871,7 +862,6 @@ export interface CreateServerRequest {
      * <p>The domain of the storage system that is used for file transfers. There are two domains
      *       available: Amazon Simple Storage Service (Amazon S3) and Amazon Elastic File System (Amazon EFS). The
      *       default value is S3.</p>
-     *
      *          <note>
      *             <p>After the server is created, the domain cannot be changed.</p>
      *          </note>
@@ -896,7 +886,6 @@ export interface CreateServerRequest {
      *       <code>EndpointType=VPC_ENDPOINT</code> in your Amazon Web Services account on or before May 19, 2021,
      *         you will not be affected. After this date, use
      *         <code>EndpointType</code>=<code>VPC</code>.</p>
-     *
      *             <p>For more information, see
      *         https://docs.aws.amazon.com/transfer/latest/userguide/create-server-in-vpc.html#deprecate-vpc-endpoint.</p>
      *             <p>It is recommended that you use <code>VPC</code> as the <code>EndpointType</code>. With
@@ -910,31 +899,23 @@ export interface CreateServerRequest {
     /**
      * <p>The RSA, ECDSA, or ED25519 private key to use for your SFTP-enabled server. You can add multiple host keys, in case you want
      *      to rotate keys, or have a set of active keys that use different algorithms.</p>
-     *
      *          <p>Use the following command to generate an RSA 2048 bit key with no passphrase:</p>
      *          <p>
      *             <code>ssh-keygen -t rsa -b 2048 -N "" -m PEM -f my-new-server-key</code>.</p>
      *          <p>Use a minimum value of 2048 for the <code>-b</code> option. You can create a stronger key by using 3072 or 4096.</p>
-     *
      *          <p>Use the following command to generate an ECDSA 256 bit key with no passphrase:</p>
      *          <p>
      *             <code>ssh-keygen -t ecdsa -b 256 -N "" -m PEM -f my-new-server-key</code>.</p>
      *          <p>Valid values for the <code>-b</code> option for ECDSA are 256, 384, and 521.</p>
-     *
      *          <p>Use the following command to generate an ED25519 key with no passphrase:</p>
      *          <p>
      *             <code>ssh-keygen -t ed25519 -N "" -f my-new-server-key</code>.</p>
-     *
      *          <p>For all of these commands, you can replace <i>my-new-server-key</i> with a string of your choice.</p>
-     *
      *          <important>
      *             <p>If you aren't planning to migrate existing users from an existing SFTP-enabled
      *         server to a new server, don't update the host key. Accidentally changing a
      *         server's host key can be disruptive.</p>
      *          </important>
-     *
-     *
-     *
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/transfer/latest/userguide/edit-server-config.html#configuring-servers-change-host-key">Update host keys for your SFTP-enabled server</a> in the <i>Transfer Family User Guide</i>.</p>
      */
     HostKey?: string;
@@ -978,7 +959,6 @@ export interface CreateServerRequest {
     /**
      * <p>Specifies a string to display when users connect to a server. This string is displayed before the user authenticates.
      *     For example, the following banner displays details about using the system:</p>
-     *
      *          <p>
      *             <code>This system is for the use of authorized users only. Individuals using this computer system without authority,
      *     or in excess of their authority, are subject to having all of their activities on this system monitored and recorded by
@@ -1009,7 +989,6 @@ export interface CreateServerRequest {
      *                   <code>AS2</code> (Applicability Statement 2): used for transporting structured business-to-business data</p>
      *             </li>
      *          </ul>
-     *
      *          <note>
      *             <ul>
      *                <li>
@@ -1089,18 +1068,6 @@ export interface CreateServerResponse {
      */
     ServerId: string | undefined;
 }
-/**
- * <p>The request was denied due to request throttling.</p>
- */
-export declare class ThrottlingException extends __BaseException {
-    readonly name: "ThrottlingException";
-    readonly $fault: "client";
-    RetryAfterSeconds?: string;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<ThrottlingException, __BaseException>);
-}
 export interface CreateUserRequest {
     /**
      * <p>The landing directory (folder) for a user when they log in to the server using the client.</p>
@@ -1123,14 +1090,11 @@ export interface CreateUserRequest {
      *       role provides access to paths in <code>Target</code>. This value
      *       can be set only when <code>HomeDirectoryType</code> is set to
      *       <i>LOGICAL</i>.</p>
-     *
      *          <p>The following is an <code>Entry</code> and <code>Target</code> pair example.</p>
-     *
      *          <p>
      *             <code>[ { "Entry": "/directory1", "Target":
      *         "/bucket_name/home/mydirectory" } ]</code>
      *          </p>
-     *
      *          <p>In most cases, you can use this value instead of the session policy to lock your user
      *       down to the designated home directory ("<code>chroot</code>"). To do this, you can set
      *         <code>Entry</code> to <code>/</code> and set <code>Target</code> to the HomeDirectory
@@ -1145,20 +1109,13 @@ export interface CreateUserRequest {
      * <p>A session policy for your user so that you can use the same Identity and Access Management (IAM) role across multiple users. This policy scopes down a user's
      *      access to portions of their Amazon S3 bucket. Variables that you can use inside this policy include <code>${Transfer:UserName}</code>,
      *      <code>${Transfer:HomeDirectory}</code>, and <code>${Transfer:HomeBucket}</code>.</p>
-     *
      *          <note>
      *             <p>This policy applies only when the domain of <code>ServerId</code> is Amazon S3. Amazon EFS does not use session policies.</p>
      *             <p>For session policies, Transfer Family stores the policy as a JSON blob, instead
      *         of the Amazon Resource Name (ARN) of the policy. You save the policy as a JSON blob and pass
      *         it in the <code>Policy</code> argument.</p>
-     *
-     *
-     *
      *             <p>For an example of a session policy, see <a href="https://docs.aws.amazon.com/transfer/latest/userguide/session-policy.html">Example session
      *         policy</a>.</p>
-     *
-     *
-     *
      *             <p>For more information, see <a href="https://docs.aws.amazon.com/STS/latest/APIReference/API_AssumeRole.html">AssumeRole</a> in the <i>Amazon Web Services
      *           Security Token Service API Reference</i>.</p>
      *          </note>
@@ -1468,13 +1425,10 @@ export interface DeleteAccessRequest {
      *     The users of the group that you associate have access to your Amazon S3 or Amazon EFS
      *     resources over the enabled protocols using Transfer Family. If you know the group name,
      *     you can view the SID values by running the following command using Windows PowerShell.</p>
-     *
      *          <p>
      *             <code>Get-ADGroup -Filter {samAccountName -like "<i>YourGroupName</i>*"} -Properties * | Select SamAccountName,ObjectSid</code>
      *          </p>
-     *
      *          <p>In that command, replace <i>YourGroupName</i> with the name of your Active Directory group.</p>
-     *
      *          <p>The regular expression used to validate this parameter is a string of characters consisting of uppercase and lowercase alphanumeric characters with no spaces.
      *     You can also include underscores or any of the following characters: =,.@:/-</p>
      */
@@ -1566,13 +1520,10 @@ export interface DescribeAccessRequest {
      *     The users of the group that you associate have access to your Amazon S3 or Amazon EFS
      *     resources over the enabled protocols using Transfer Family. If you know the group name,
      *     you can view the SID values by running the following command using Windows PowerShell.</p>
-     *
      *          <p>
      *             <code>Get-ADGroup -Filter {samAccountName -like "<i>YourGroupName</i>*"} -Properties * | Select SamAccountName,ObjectSid</code>
      *          </p>
-     *
      *          <p>In that command, replace <i>YourGroupName</i> with the name of your Active Directory group.</p>
-     *
      *          <p>The regular expression used to validate this parameter is a string of characters consisting of uppercase and lowercase alphanumeric characters with no spaces.
      *     You can also include underscores or any of the following characters: =,.@:/-</p>
      */
@@ -1596,7 +1547,6 @@ export interface DescribedAccess {
      *       role provides access to paths in <code>Target</code>. This value
      *       can be set only when <code>HomeDirectoryType</code> is set to
      *       <i>LOGICAL</i>.</p>
-     *
      *          <p>In most cases, you can use this value instead of the session policy to lock down the
      *       associated access to the designated home directory ("<code>chroot</code>"). To do this, you
      *       can set <code>Entry</code> to '/' and set <code>Target</code> to the
@@ -1636,13 +1586,10 @@ export interface DescribedAccess {
      *     The users of the group that you associate have access to your Amazon S3 or Amazon EFS
      *     resources over the enabled protocols using Transfer Family. If you know the group name,
      *     you can view the SID values by running the following command using Windows PowerShell.</p>
-     *
      *          <p>
      *             <code>Get-ADGroup -Filter {samAccountName -like "<i>YourGroupName</i>*"} -Properties * | Select SamAccountName,ObjectSid</code>
      *          </p>
-     *
      *          <p>In that command, replace <i>YourGroupName</i> with the name of your Active Directory group.</p>
-     *
      *          <p>The regular expression used to validate this parameter is a string of characters consisting of uppercase and lowercase alphanumeric characters with no spaces.
      *     You can also include underscores or any of the following characters: =,.@:/-</p>
      */
@@ -2347,7 +2294,6 @@ export interface DescribedServer {
     /**
      * <p>Specifies a string to display when users connect to a server. This string is displayed before the user authenticates.
      *     For example, the following banner displays details about using the system:</p>
-     *
      *          <p>
      *             <code>This system is for the use of authorized users only. Individuals using this computer system without authority,
      *     or in excess of their authority, are subject to having all of their activities on this system monitored and recorded by
@@ -2378,7 +2324,6 @@ export interface DescribedServer {
      *                   <code>AS2</code> (Applicability Statement 2): used for transporting structured business-to-business data</p>
      *             </li>
      *          </ul>
-     *
      *          <note>
      *             <ul>
      *                <li>
@@ -2421,7 +2366,6 @@ export interface DescribedServer {
      *         <code>ONLINE</code> indicates that the server can accept jobs and transfer files. A
      *         <code>State</code> value of <code>OFFLINE</code> means that the server cannot perform file
      *       transfer operations.</p>
-     *
      *          <p>The states of <code>STARTING</code> and <code>STOPPING</code> indicate that the server is
      *       in an intermediate state, either not fully able to respond, or not fully offline. The values
      *       of <code>START_FAILED</code> or <code>STOP_FAILED</code> can indicate an error
@@ -2493,7 +2437,6 @@ export interface DescribedUser {
      *       role provides access to paths in <code>Target</code>. This value
      *       can be set only when <code>HomeDirectoryType</code> is set to
      *       <i>LOGICAL</i>.</p>
-     *
      *          <p>In most cases, you can use this value instead of the session policy to lock your user
      *       down to the designated home directory ("<code>chroot</code>"). To do this, you can set
      *         <code>Entry</code> to '/' and set <code>Target</code> to the HomeDirectory
@@ -2843,13 +2786,10 @@ export interface ListedAccess {
      *     The users of the group that you associate have access to your Amazon S3 or Amazon EFS
      *     resources over the enabled protocols using Transfer Family. If you know the group name,
      *     you can view the SID values by running the following command using Windows PowerShell.</p>
-     *
      *          <p>
      *             <code>Get-ADGroup -Filter {samAccountName -like "<i>YourGroupName</i>*"} -Properties * | Select SamAccountName,ObjectSid</code>
      *          </p>
-     *
      *          <p>In that command, replace <i>YourGroupName</i> with the name of your Active Directory group.</p>
-     *
      *          <p>The regular expression used to validate this parameter is a string of characters consisting of uppercase and lowercase alphanumeric characters with no spaces.
      *     You can also include underscores or any of the following characters: =,.@:/-</p>
      */
@@ -3194,7 +3134,6 @@ export interface ListedServer {
      *         <code>ONLINE</code> indicates that the server can accept jobs and transfer files. A
      *         <code>State</code> value of <code>OFFLINE</code> means that the server cannot perform file
      *       transfer operations.</p>
-     *
      *          <p>The states of <code>STARTING</code> and <code>STOPPING</code> indicate that the server is
      *       in an intermediate state, either not fully able to respond, or not fully offline. The values
      *       of <code>START_FAILED</code> or <code>STOP_FAILED</code> can indicate an error
@@ -3234,12 +3173,10 @@ export interface ListedUser {
      *       when transferring files into and out of your Amazon S3 bucket or Amazon EFS file system. The IAM role should also contain a trust
      *       relationship that allows the server to access your resources when servicing your users' transfer requests.</p>
      *          <note>
-     *
      *             <p>The IAM role that controls your users' access to your Amazon S3 bucket for servers with <code>Domain=S3</code>, or your EFS file system for servers with <code>Domain=EFS</code>.
      *         </p>
      *             <p>The policies attached to this role determine the level of access you want to provide your users when
      *         transferring files into and out of your S3 buckets or EFS file systems.</p>
-     *
      *          </note>
      */
     Role?: string;
@@ -3625,9 +3562,7 @@ export interface TestIdentityProviderRequest {
     ServerId: string | undefined;
     /**
      * <p>The type of file transfer protocol to be tested.</p>
-     *
      *          <p>The available protocols are:</p>
-     *
      *          <ul>
      *             <li>
      *                <p>Secure Shell (SSH) File Transfer Protocol (SFTP)</p>
@@ -3727,7 +3662,6 @@ export interface UpdateAccessRequest {
      * <p>A session policy for your user so that you can use the same Identity and Access Management (IAM) role across multiple users. This policy scopes down a user's
      *      access to portions of their Amazon S3 bucket. Variables that you can use inside this policy include <code>${Transfer:UserName}</code>,
      *      <code>${Transfer:HomeDirectory}</code>, and <code>${Transfer:HomeBucket}</code>.</p>
-     *
      *          <note>
      *             <p>This policy applies only when the domain of <code>ServerId</code> is Amazon S3. Amazon EFS does not use session policies.</p>
      *             <p>For session policies, Transfer Family stores the policy as a JSON blob, instead
@@ -3764,13 +3698,10 @@ export interface UpdateAccessRequest {
      *     The users of the group that you associate have access to your Amazon S3 or Amazon EFS
      *     resources over the enabled protocols using Transfer Family. If you know the group name,
      *     you can view the SID values by running the following command using Windows PowerShell.</p>
-     *
      *          <p>
      *             <code>Get-ADGroup -Filter {samAccountName -like "<i>YourGroupName</i>*"} -Properties * | Select SamAccountName,ObjectSid</code>
      *          </p>
-     *
      *          <p>In that command, replace <i>YourGroupName</i> with the name of your Active Directory group.</p>
-     *
      *          <p>The regular expression used to validate this parameter is a string of characters consisting of uppercase and lowercase alphanumeric characters with no spaces.
      *     You can also include underscores or any of the following characters: =,.@:/-</p>
      */
@@ -3950,20 +3881,15 @@ export interface UpdateServerRequest {
     /**
      * <p>The Amazon Resource Name (ARN) of the Amazon Web ServicesCertificate Manager (ACM) certificate. Required
      *       when <code>Protocols</code> is set to <code>FTPS</code>.</p>
-     *
      *          <p>To request a new public certificate, see <a href="https://docs.aws.amazon.com/acm/latest/userguide/gs-acm-request-public.html">Request a public certificate</a>
      *       in the <i> Amazon Web ServicesCertificate Manager User Guide</i>.</p>
-     *
      *          <p>To import an existing certificate into ACM, see <a href="https://docs.aws.amazon.com/acm/latest/userguide/import-certificate.html">Importing certificates into ACM</a>
      *       in the <i> Amazon Web ServicesCertificate Manager User Guide</i>.</p>
-     *
      *          <p>To request a private certificate to use FTPS through private IP addresses, see <a href="https://docs.aws.amazon.com/acm/latest/userguide/gs-acm-request-private.html">Request a
      *         private certificate</a> in the <i> Amazon Web ServicesCertificate Manager User
      *       Guide</i>.</p>
-     *
      *          <p>Certificates with the following cryptographic algorithms and key sizes are
      *       supported:</p>
-     *
      *          <ul>
      *             <li>
      *                <p>2048-bit RSA (RSA_2048)</p>
@@ -3981,7 +3907,6 @@ export interface UpdateServerRequest {
      *                <p>Elliptic Prime Curve 521 bit (EC_secp521r1)</p>
      *             </li>
      *          </ul>
-     *
      *          <note>
      *             <p>The certificate must be a valid SSL/TLS X.509 version 3 certificate with FQDN or IP
      *         address specified and information about the issuer.</p>
@@ -4035,7 +3960,6 @@ export interface UpdateServerRequest {
      *       <code>EndpointType=VPC_ENDPOINT</code> in your Amazon Web Servicesaccount on or before May 19, 2021,
      *         you will not be affected. After this date, use
      *         <code>EndpointType</code>=<code>VPC</code>.</p>
-     *
      *             <p>For more information, see
      *         https://docs.aws.amazon.com/transfer/latest/userguide/create-server-in-vpc.html#deprecate-vpc-endpoint.</p>
      *             <p>It is recommended that you use <code>VPC</code> as the <code>EndpointType</code>. With
@@ -4049,31 +3973,23 @@ export interface UpdateServerRequest {
     /**
      * <p>The RSA, ECDSA, or ED25519 private key to use for your SFTP-enabled server. You can add multiple host keys, in case you want
      *      to rotate keys, or have a set of active keys that use different algorithms.</p>
-     *
      *          <p>Use the following command to generate an RSA 2048 bit key with no passphrase:</p>
      *          <p>
      *             <code>ssh-keygen -t rsa -b 2048 -N "" -m PEM -f my-new-server-key</code>.</p>
      *          <p>Use a minimum value of 2048 for the <code>-b</code> option. You can create a stronger key by using 3072 or 4096.</p>
-     *
      *          <p>Use the following command to generate an ECDSA 256 bit key with no passphrase:</p>
      *          <p>
      *             <code>ssh-keygen -t ecdsa -b 256 -N "" -m PEM -f my-new-server-key</code>.</p>
      *          <p>Valid values for the <code>-b</code> option for ECDSA are 256, 384, and 521.</p>
-     *
      *          <p>Use the following command to generate an ED25519 key with no passphrase:</p>
      *          <p>
      *             <code>ssh-keygen -t ed25519 -N "" -f my-new-server-key</code>.</p>
-     *
      *          <p>For all of these commands, you can replace <i>my-new-server-key</i> with a string of your choice.</p>
-     *
      *          <important>
      *             <p>If you aren't planning to migrate existing users from an existing SFTP-enabled
      *         server to a new server, don't update the host key. Accidentally changing a
      *         server's host key can be disruptive.</p>
      *          </important>
-     *
-     *
-     *
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/transfer/latest/userguide/edit-server-config.html#configuring-servers-change-host-key">Update host keys for your SFTP-enabled server</a> in the <i>Transfer Family User Guide</i>.</p>
      */
     HostKey?: string;
@@ -4098,7 +4014,6 @@ export interface UpdateServerRequest {
     /**
      * <p>Specifies a string to display when users connect to a server. This string is displayed before the user authenticates.
      *     For example, the following banner displays details about using the system:</p>
-     *
      *          <p>
      *             <code>This system is for the use of authorized users only. Individuals using this computer system without authority,
      *     or in excess of their authority, are subject to having all of their activities on this system monitored and recorded by
@@ -4129,7 +4044,6 @@ export interface UpdateServerRequest {
      *                   <code>AS2</code> (Applicability Statement 2): used for transporting structured business-to-business data</p>
      *             </li>
      *          </ul>
-     *
      *          <note>
      *             <ul>
      *                <li>
@@ -4209,17 +4123,14 @@ export interface UpdateUserRequest {
      *       role provides access to paths in <code>Target</code>. This value
      *       can be set only when <code>HomeDirectoryType</code> is set to
      *       <i>LOGICAL</i>.</p>
-     *
      *          <p>The following is an <code>Entry</code> and <code>Target</code> pair example.</p>
      *          <p>
      *             <code>[ { "Entry": "/directory1", "Target": "/bucket_name/home/mydirectory" } ]</code>
      *          </p>
-     *
      *          <p>In most cases, you can use this value instead of the session policy to lock down your
      *       user to the designated home directory ("<code>chroot</code>"). To do this, you can set
      *         <code>Entry</code> to '/' and set <code>Target</code> to the HomeDirectory
      *       parameter value.</p>
-     *
      *          <p>The following is an <code>Entry</code> and <code>Target</code> pair example for <code>chroot</code>.</p>
      *          <p>
      *             <code>[ { "Entry": "/", "Target": "/bucket_name/home/mydirectory" } ]</code>
@@ -4230,20 +4141,13 @@ export interface UpdateUserRequest {
      * <p>A session policy for your user so that you can use the same Identity and Access Management (IAM) role across multiple users. This policy scopes down a user's
      *      access to portions of their Amazon S3 bucket. Variables that you can use inside this policy include <code>${Transfer:UserName}</code>,
      *      <code>${Transfer:HomeDirectory}</code>, and <code>${Transfer:HomeBucket}</code>.</p>
-     *
      *          <note>
      *             <p>This policy applies only when the domain of <code>ServerId</code> is Amazon S3. Amazon EFS does not use session policies.</p>
      *             <p>For session policies, Transfer Family stores the policy as a JSON blob, instead
      *         of the Amazon Resource Name (ARN) of the policy. You save the policy as a JSON blob and pass
      *         it in the <code>Policy</code> argument.</p>
-     *
-     *
-     *
      *             <p>For an example of a session policy, see <a href="https://docs.aws.amazon.com/transfer/latest/userguide/session-policy">Creating a session
      *           policy</a>.</p>
-     *
-     *
-     *
      *             <p>For more information, see <a href="https://docs.aws.amazon.com/STS/latest/APIReference/API_AssumeRole.html">AssumeRole</a> in the <i>Amazon Web Services
      *           Security Token Service API Reference</i>.</p>
      *          </note>

package/dist-types/ts3.4/models/models_0.d.ts

@@ -183,6 +183,14 @@ export interface CreateAgreementRequest {
 export interface CreateAgreementResponse {
   AgreementId: string | undefined;
 }
+export declare class ThrottlingException extends __BaseException {
+  readonly name: "ThrottlingException";
+  readonly $fault: "client";
+  RetryAfterSeconds?: string;
+  constructor(
+    opts: __ExceptionOptionType<ThrottlingException, __BaseException>
+  );
+}
 export interface CreateConnectorRequest {
   Url: string | undefined;
   As2Config: As2ConnectorConfig | undefined;
@@ -283,14 +291,6 @@ export interface CreateServerRequest {
 export interface CreateServerResponse {
   ServerId: string | undefined;
 }
-export declare class ThrottlingException extends __BaseException {
-  readonly name: "ThrottlingException";
-  readonly $fault: "client";
-  RetryAfterSeconds?: string;
-  constructor(
-    opts: __ExceptionOptionType<ThrottlingException, __BaseException>
-  );
-}
 export interface CreateUserRequest {
   HomeDirectory?: string;
   HomeDirectoryType?: HomeDirectoryType | string;

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@aws-sdk/client-transfer",
   "description": "AWS SDK for JavaScript Transfer Client for Node.js, Browser and React Native",
-  "version": "3.238.0",
+  "version": "3.239.0",
   "scripts": {
     "build": "concurrently 'yarn:build:cjs' 'yarn:build:es' 'yarn:build:types'",
     "build:cjs": "tsc -p tsconfig.cjs.json",