@aws-sdk/client-swf 3.32.0 → 3.36.0

package/commands/RegisterActivityTypeCommand.ts

@@ -1,140 +0,0 @@
-import { SWFClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../SWFClient";
-import { RegisterActivityTypeInput } from "../models/models_0";
-import {
-  deserializeAws_json1_0RegisterActivityTypeCommand,
-  serializeAws_json1_0RegisterActivityTypeCommand,
-} from "../protocols/Aws_json1_0";
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  MiddlewareStack,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-export interface RegisterActivityTypeCommandInput extends RegisterActivityTypeInput {}
-export interface RegisterActivityTypeCommandOutput extends __MetadataBearer {}
-
-/**
- * <p>Registers a new <i>activity type</i> along with its configuration
- *       settings in the specified domain.</p>
- *          <important>
- *             <p>A <code>TypeAlreadyExists</code> fault is returned if the type already exists in the
- *         domain. You cannot change any configuration settings of the type after its registration, and
- *         it must be registered as a new version.</p>
- *          </important>
- *          <p>
- *             <b>Access Control</b>
- *          </p>
- *          <p>You can use IAM policies to control this action's access to Amazon SWF resources as
- *       follows:</p>
- *          <ul>
- *             <li>
- *                <p>Use a <code>Resource</code> element with the domain name to limit the action to
- *           only specified domains.</p>
- *             </li>
- *             <li>
- *                <p>Use an <code>Action</code> element to allow or deny permission to call this
- *           action.</p>
- *             </li>
- *             <li>
- *                <p>Constrain the following parameters by using a <code>Condition</code> element with
- *           the appropriate keys.</p>
- *                <ul>
- *                   <li>
- *                      <p>
- *                         <code>defaultTaskList.name</code>: String constraint. The key is
- *                 <code>swf:defaultTaskList.name</code>.</p>
- *                   </li>
- *                   <li>
- *                      <p>
- *                         <code>name</code>: String constraint. The key is <code>swf:name</code>.</p>
- *                   </li>
- *                   <li>
- *                      <p>
- *                         <code>version</code>: String constraint. The key is
- *               <code>swf:version</code>.</p>
- *                   </li>
- *                </ul>
- *             </li>
- *          </ul>
- *          <p>If the caller doesn't have sufficient permissions to invoke the action, or the
- *       parameter values fall outside the specified constraints, the action fails. The associated
- *       event attribute's <code>cause</code> parameter is set to <code>OPERATION_NOT_PERMITTED</code>.
- *       For details and example IAM policies, see <a href="https://docs.aws.amazon.com/amazonswf/latest/developerguide/swf-dev-iam.html">Using IAM to Manage Access to Amazon SWF
- *         Workflows</a> in the <i>Amazon SWF Developer Guide</i>.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { SWFClient, RegisterActivityTypeCommand } from "@aws-sdk/client-swf"; // ES Modules import
- * // const { SWFClient, RegisterActivityTypeCommand } = require("@aws-sdk/client-swf"); // CommonJS import
- * const client = new SWFClient(config);
- * const command = new RegisterActivityTypeCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link RegisterActivityTypeCommandInput} for command's `input` shape.
- * @see {@link RegisterActivityTypeCommandOutput} for command's `response` shape.
- * @see {@link SWFClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class RegisterActivityTypeCommand extends $Command<
-  RegisterActivityTypeCommandInput,
-  RegisterActivityTypeCommandOutput,
-  SWFClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: RegisterActivityTypeCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: SWFClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<RegisterActivityTypeCommandInput, RegisterActivityTypeCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "SWFClient";
-    const commandName = "RegisterActivityTypeCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: RegisterActivityTypeInput.filterSensitiveLog,
-      outputFilterSensitiveLog: (output: any) => output,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: RegisterActivityTypeCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_0RegisterActivityTypeCommand(input, context);
-  }
-
-  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<RegisterActivityTypeCommandOutput> {
-    return deserializeAws_json1_0RegisterActivityTypeCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}

package/commands/RegisterDomainCommand.ts

@@ -1,117 +0,0 @@
-import { SWFClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../SWFClient";
-import { RegisterDomainInput } from "../models/models_0";
-import {
-  deserializeAws_json1_0RegisterDomainCommand,
-  serializeAws_json1_0RegisterDomainCommand,
-} from "../protocols/Aws_json1_0";
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  MiddlewareStack,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-export interface RegisterDomainCommandInput extends RegisterDomainInput {}
-export interface RegisterDomainCommandOutput extends __MetadataBearer {}
-
-/**
- * <p>Registers a new domain.</p>
- *          <p>
- *             <b>Access Control</b>
- *          </p>
- *          <p>You can use IAM policies to control this action's access to Amazon SWF resources as
- *       follows:</p>
- *          <ul>
- *             <li>
- *                <p>You cannot use an IAM policy to control domain access for this action. The name of
- *           the domain being registered is available as the resource of this action.</p>
- *             </li>
- *             <li>
- *                <p>Use an <code>Action</code> element to allow or deny permission to call this
- *           action.</p>
- *             </li>
- *             <li>
- *                <p>You cannot use an IAM policy to constrain this action's parameters.</p>
- *             </li>
- *          </ul>
- *          <p>If the caller doesn't have sufficient permissions to invoke the action, or the
- *       parameter values fall outside the specified constraints, the action fails. The associated
- *       event attribute's <code>cause</code> parameter is set to <code>OPERATION_NOT_PERMITTED</code>.
- *       For details and example IAM policies, see <a href="https://docs.aws.amazon.com/amazonswf/latest/developerguide/swf-dev-iam.html">Using IAM to Manage Access to Amazon SWF
- *         Workflows</a> in the <i>Amazon SWF Developer Guide</i>.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { SWFClient, RegisterDomainCommand } from "@aws-sdk/client-swf"; // ES Modules import
- * // const { SWFClient, RegisterDomainCommand } = require("@aws-sdk/client-swf"); // CommonJS import
- * const client = new SWFClient(config);
- * const command = new RegisterDomainCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link RegisterDomainCommandInput} for command's `input` shape.
- * @see {@link RegisterDomainCommandOutput} for command's `response` shape.
- * @see {@link SWFClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class RegisterDomainCommand extends $Command<
-  RegisterDomainCommandInput,
-  RegisterDomainCommandOutput,
-  SWFClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: RegisterDomainCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: SWFClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<RegisterDomainCommandInput, RegisterDomainCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "SWFClient";
-    const commandName = "RegisterDomainCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: RegisterDomainInput.filterSensitiveLog,
-      outputFilterSensitiveLog: (output: any) => output,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: RegisterDomainCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_0RegisterDomainCommand(input, context);
-  }
-
-  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<RegisterDomainCommandOutput> {
-    return deserializeAws_json1_0RegisterDomainCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}

package/commands/RegisterWorkflowTypeCommand.ts

@@ -1,141 +0,0 @@
-import { SWFClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../SWFClient";
-import { RegisterWorkflowTypeInput } from "../models/models_0";
-import {
-  deserializeAws_json1_0RegisterWorkflowTypeCommand,
-  serializeAws_json1_0RegisterWorkflowTypeCommand,
-} from "../protocols/Aws_json1_0";
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  MiddlewareStack,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-export interface RegisterWorkflowTypeCommandInput extends RegisterWorkflowTypeInput {}
-export interface RegisterWorkflowTypeCommandOutput extends __MetadataBearer {}
-
-/**
- * <p>Registers a new <i>workflow type</i> and its configuration settings in
- *       the specified domain.</p>
- *          <p>The retention period for the workflow history is set by the <a>RegisterDomain</a> action.</p>
- *          <important>
- *             <p>If the type already exists, then a <code>TypeAlreadyExists</code> fault is returned.
- *         You cannot change the configuration settings of a workflow type once it is registered and it
- *         must be registered as a new version.</p>
- *          </important>
- *          <p>
- *             <b>Access Control</b>
- *          </p>
- *          <p>You can use IAM policies to control this action's access to Amazon SWF resources as
- *       follows:</p>
- *          <ul>
- *             <li>
- *                <p>Use a <code>Resource</code> element with the domain name to limit the action to
- *           only specified domains.</p>
- *             </li>
- *             <li>
- *                <p>Use an <code>Action</code> element to allow or deny permission to call this
- *           action.</p>
- *             </li>
- *             <li>
- *                <p>Constrain the following parameters by using a <code>Condition</code> element with
- *           the appropriate keys.</p>
- *                <ul>
- *                   <li>
- *                      <p>
- *                         <code>defaultTaskList.name</code>: String constraint. The key is
- *                 <code>swf:defaultTaskList.name</code>.</p>
- *                   </li>
- *                   <li>
- *                      <p>
- *                         <code>name</code>: String constraint. The key is <code>swf:name</code>.</p>
- *                   </li>
- *                   <li>
- *                      <p>
- *                         <code>version</code>: String constraint. The key is
- *               <code>swf:version</code>.</p>
- *                   </li>
- *                </ul>
- *             </li>
- *          </ul>
- *          <p>If the caller doesn't have sufficient permissions to invoke the action, or the
- *       parameter values fall outside the specified constraints, the action fails. The associated
- *       event attribute's <code>cause</code> parameter is set to <code>OPERATION_NOT_PERMITTED</code>.
- *       For details and example IAM policies, see <a href="https://docs.aws.amazon.com/amazonswf/latest/developerguide/swf-dev-iam.html">Using IAM to Manage Access to Amazon SWF
- *         Workflows</a> in the <i>Amazon SWF Developer Guide</i>.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { SWFClient, RegisterWorkflowTypeCommand } from "@aws-sdk/client-swf"; // ES Modules import
- * // const { SWFClient, RegisterWorkflowTypeCommand } = require("@aws-sdk/client-swf"); // CommonJS import
- * const client = new SWFClient(config);
- * const command = new RegisterWorkflowTypeCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link RegisterWorkflowTypeCommandInput} for command's `input` shape.
- * @see {@link RegisterWorkflowTypeCommandOutput} for command's `response` shape.
- * @see {@link SWFClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class RegisterWorkflowTypeCommand extends $Command<
-  RegisterWorkflowTypeCommandInput,
-  RegisterWorkflowTypeCommandOutput,
-  SWFClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: RegisterWorkflowTypeCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: SWFClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<RegisterWorkflowTypeCommandInput, RegisterWorkflowTypeCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "SWFClient";
-    const commandName = "RegisterWorkflowTypeCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: RegisterWorkflowTypeInput.filterSensitiveLog,
-      outputFilterSensitiveLog: (output: any) => output,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: RegisterWorkflowTypeCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_0RegisterWorkflowTypeCommand(input, context);
-  }
-
-  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<RegisterWorkflowTypeCommandOutput> {
-    return deserializeAws_json1_0RegisterWorkflowTypeCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}

package/commands/RequestCancelWorkflowExecutionCommand.ts

@@ -1,138 +0,0 @@
-import { SWFClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../SWFClient";
-import { RequestCancelWorkflowExecutionInput } from "../models/models_0";
-import {
-  deserializeAws_json1_0RequestCancelWorkflowExecutionCommand,
-  serializeAws_json1_0RequestCancelWorkflowExecutionCommand,
-} from "../protocols/Aws_json1_0";
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  MiddlewareStack,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-export interface RequestCancelWorkflowExecutionCommandInput extends RequestCancelWorkflowExecutionInput {}
-export interface RequestCancelWorkflowExecutionCommandOutput extends __MetadataBearer {}
-
-/**
- * <p>Records a <code>WorkflowExecutionCancelRequested</code> event in the currently running
- *       workflow execution identified by the given domain, workflowId, and runId. This logically
- *       requests the cancellation of the workflow execution as a whole. It is up to the decider to
- *       take appropriate actions when it receives an execution history with this event.</p>
- *
- *          <note>
- *             <p>If the runId isn't specified, the <code>WorkflowExecutionCancelRequested</code> event
- *         is recorded in the history of the current open workflow execution with the specified
- *         workflowId in the domain.</p>
- *          </note>
- *
- *          <note>
- *             <p>Because this action allows the workflow to properly clean up and gracefully close, it
- *         should be used instead of <a>TerminateWorkflowExecution</a> when
- *         possible.</p>
- *          </note>
- *          <p>
- *             <b>Access Control</b>
- *          </p>
- *          <p>You can use IAM policies to control this action's access to Amazon SWF resources as
- *       follows:</p>
- *          <ul>
- *             <li>
- *                <p>Use a <code>Resource</code> element with the domain name to limit the action to
- *           only specified domains.</p>
- *             </li>
- *             <li>
- *                <p>Use an <code>Action</code> element to allow or deny permission to call this
- *           action.</p>
- *             </li>
- *             <li>
- *                <p>You cannot use an IAM policy to constrain this action's parameters.</p>
- *             </li>
- *          </ul>
- *          <p>If the caller doesn't have sufficient permissions to invoke the action, or the
- *       parameter values fall outside the specified constraints, the action fails. The associated
- *       event attribute's <code>cause</code> parameter is set to <code>OPERATION_NOT_PERMITTED</code>.
- *       For details and example IAM policies, see <a href="https://docs.aws.amazon.com/amazonswf/latest/developerguide/swf-dev-iam.html">Using IAM to Manage Access to Amazon SWF
- *         Workflows</a> in the <i>Amazon SWF Developer Guide</i>.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { SWFClient, RequestCancelWorkflowExecutionCommand } from "@aws-sdk/client-swf"; // ES Modules import
- * // const { SWFClient, RequestCancelWorkflowExecutionCommand } = require("@aws-sdk/client-swf"); // CommonJS import
- * const client = new SWFClient(config);
- * const command = new RequestCancelWorkflowExecutionCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link RequestCancelWorkflowExecutionCommandInput} for command's `input` shape.
- * @see {@link RequestCancelWorkflowExecutionCommandOutput} for command's `response` shape.
- * @see {@link SWFClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class RequestCancelWorkflowExecutionCommand extends $Command<
-  RequestCancelWorkflowExecutionCommandInput,
-  RequestCancelWorkflowExecutionCommandOutput,
-  SWFClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: RequestCancelWorkflowExecutionCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: SWFClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<RequestCancelWorkflowExecutionCommandInput, RequestCancelWorkflowExecutionCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "SWFClient";
-    const commandName = "RequestCancelWorkflowExecutionCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: RequestCancelWorkflowExecutionInput.filterSensitiveLog,
-      outputFilterSensitiveLog: (output: any) => output,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(
-    input: RequestCancelWorkflowExecutionCommandInput,
-    context: __SerdeContext
-  ): Promise<__HttpRequest> {
-    return serializeAws_json1_0RequestCancelWorkflowExecutionCommand(input, context);
-  }
-
-  private deserialize(
-    output: __HttpResponse,
-    context: __SerdeContext
-  ): Promise<RequestCancelWorkflowExecutionCommandOutput> {
-    return deserializeAws_json1_0RequestCancelWorkflowExecutionCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}

package/commands/RespondActivityTaskCanceledCommand.ts

@@ -1,138 +0,0 @@
-import { SWFClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../SWFClient";
-import { RespondActivityTaskCanceledInput } from "../models/models_0";
-import {
-  deserializeAws_json1_0RespondActivityTaskCanceledCommand,
-  serializeAws_json1_0RespondActivityTaskCanceledCommand,
-} from "../protocols/Aws_json1_0";
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  MiddlewareStack,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-export interface RespondActivityTaskCanceledCommandInput extends RespondActivityTaskCanceledInput {}
-export interface RespondActivityTaskCanceledCommandOutput extends __MetadataBearer {}
-
-/**
- * <p>Used by workers to tell the service that the <a>ActivityTask</a> identified
- *       by the <code>taskToken</code> was successfully canceled. Additional <code>details</code> can
- *       be provided using the <code>details</code> argument.</p>
- *
- *          <p>These <code>details</code> (if provided) appear in the
- *         <code>ActivityTaskCanceled</code> event added to the workflow history.</p>
- *
- *          <important>
- *             <p>Only use this operation if the <code>canceled</code> flag of a <a>RecordActivityTaskHeartbeat</a> request returns <code>true</code> and if the
- *         activity can be safely undone or abandoned.</p>
- *          </important>
- *
- *          <p>A task is considered open from the time that it is scheduled until it is closed.
- *       Therefore a task is reported as open while a worker is processing it. A task is closed after
- *       it has been specified in a call to <a>RespondActivityTaskCompleted</a>,
- *       RespondActivityTaskCanceled, <a>RespondActivityTaskFailed</a>, or the task has
- *         <a href="https://docs.aws.amazon.com/amazonswf/latest/developerguide/swf-dg-basic.html#swf-dev-timeout-types">timed
- *         out</a>.</p>
- *
- *          <p>
- *             <b>Access Control</b>
- *          </p>
- *          <p>You can use IAM policies to control this action's access to Amazon SWF resources as
- *       follows:</p>
- *          <ul>
- *             <li>
- *                <p>Use a <code>Resource</code> element with the domain name to limit the action to
- *           only specified domains.</p>
- *             </li>
- *             <li>
- *                <p>Use an <code>Action</code> element to allow or deny permission to call this
- *           action.</p>
- *             </li>
- *             <li>
- *                <p>You cannot use an IAM policy to constrain this action's parameters.</p>
- *             </li>
- *          </ul>
- *          <p>If the caller doesn't have sufficient permissions to invoke the action, or the
- *       parameter values fall outside the specified constraints, the action fails. The associated
- *       event attribute's <code>cause</code> parameter is set to <code>OPERATION_NOT_PERMITTED</code>.
- *       For details and example IAM policies, see <a href="https://docs.aws.amazon.com/amazonswf/latest/developerguide/swf-dev-iam.html">Using IAM to Manage Access to Amazon SWF
- *         Workflows</a> in the <i>Amazon SWF Developer Guide</i>.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { SWFClient, RespondActivityTaskCanceledCommand } from "@aws-sdk/client-swf"; // ES Modules import
- * // const { SWFClient, RespondActivityTaskCanceledCommand } = require("@aws-sdk/client-swf"); // CommonJS import
- * const client = new SWFClient(config);
- * const command = new RespondActivityTaskCanceledCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link RespondActivityTaskCanceledCommandInput} for command's `input` shape.
- * @see {@link RespondActivityTaskCanceledCommandOutput} for command's `response` shape.
- * @see {@link SWFClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class RespondActivityTaskCanceledCommand extends $Command<
-  RespondActivityTaskCanceledCommandInput,
-  RespondActivityTaskCanceledCommandOutput,
-  SWFClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: RespondActivityTaskCanceledCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: SWFClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<RespondActivityTaskCanceledCommandInput, RespondActivityTaskCanceledCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "SWFClient";
-    const commandName = "RespondActivityTaskCanceledCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: RespondActivityTaskCanceledInput.filterSensitiveLog,
-      outputFilterSensitiveLog: (output: any) => output,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: RespondActivityTaskCanceledCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_0RespondActivityTaskCanceledCommand(input, context);
-  }
-
-  private deserialize(
-    output: __HttpResponse,
-    context: __SerdeContext
-  ): Promise<RespondActivityTaskCanceledCommandOutput> {
-    return deserializeAws_json1_0RespondActivityTaskCanceledCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}