@aws-sdk/client-sso-admin 3.863.0 → 3.865.0

package/dist-types/commands/PutApplicationAccessScopeCommand.d.ts

@@ -27,8 +27,7 @@ declare const PutApplicationAccessScopeCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Adds or updates the list of authorized targets for an IAM Identity Center access scope for an
- *             application.</p>
+ * <p>Adds or updates the list of authorized targets for an IAM Identity Center access scope for an application.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -58,21 +57,16 @@ declare const PutApplicationAccessScopeCommand_base: {
  *  <p>You do not have sufficient access to perform this action.</p>
  *
  * @throws {@link ConflictException} (client fault)
- *  <p>Occurs when a conflict with a previous successful write is detected. This generally
- *             occurs when the previous write did not have time to propagate to the host serving the
- *             current request. A retry (with appropriate backoff logic) is the recommended response to
- *             this exception.</p>
+ *  <p>Occurs when a conflict with a previous successful write is detected. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.</p>
  *
  * @throws {@link InternalServerException} (server fault)
- *  <p>The request processing has failed because of an unknown error, exception, or failure
- *             with an internal server.</p>
+ *  <p>The request processing has failed because of an unknown error, exception, or failure with an internal server.</p>
  *
  * @throws {@link ResourceNotFoundException} (client fault)
  *  <p>Indicates that a requested resource is not found.</p>
  *
  * @throws {@link ThrottlingException} (client fault)
- *  <p>Indicates that the principal has crossed the throttling limits of the API
- *             operations.</p>
+ *  <p>Indicates that the principal has crossed the throttling limits of the API operations.</p>
  *
  * @throws {@link ValidationException} (client fault)
  *  <p>The request failed because it contains a syntax error.</p>

package/dist-types/commands/PutApplicationAssignmentConfigurationCommand.d.ts

@@ -27,11 +27,7 @@ declare const PutApplicationAssignmentConfigurationCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Configure how users gain access to an application. If <code>AssignmentsRequired</code>
- *             is <code>true</code> (default value), users don’t have access to the application unless
- *             an assignment is created using the <a href="https://docs.aws.amazon.com/singlesignon/latest/APIReference/API_CreateApplicationAssignment.html">CreateApplicationAssignment API</a>. If <code>false</code>, all users have
- *             access to the application. If an assignment is created using <a href="https://docs.aws.amazon.com/singlesignon/latest/APIReference/API_CreateApplicationAssignment.html">CreateApplicationAssignment</a>., the user retains access if
- *                 <code>AssignmentsRequired</code> is set to <code>true</code>. </p>
+ * <p>Configure how users gain access to an application. If <code>AssignmentsRequired</code> is <code>true</code> (default value), users don’t have access to the application unless an assignment is created using the <a href="https://docs.aws.amazon.com/singlesignon/latest/APIReference/API_CreateApplicationAssignment.html">CreateApplicationAssignment API</a>. If <code>false</code>, all users have access to the application. If an assignment is created using <a href="https://docs.aws.amazon.com/singlesignon/latest/APIReference/API_CreateApplicationAssignment.html">CreateApplicationAssignment</a>., the user retains access if <code>AssignmentsRequired</code> is set to <code>true</code>. </p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -58,21 +54,16 @@ declare const PutApplicationAssignmentConfigurationCommand_base: {
  *  <p>You do not have sufficient access to perform this action.</p>
  *
  * @throws {@link ConflictException} (client fault)
- *  <p>Occurs when a conflict with a previous successful write is detected. This generally
- *             occurs when the previous write did not have time to propagate to the host serving the
- *             current request. A retry (with appropriate backoff logic) is the recommended response to
- *             this exception.</p>
+ *  <p>Occurs when a conflict with a previous successful write is detected. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.</p>
  *
  * @throws {@link InternalServerException} (server fault)
- *  <p>The request processing has failed because of an unknown error, exception, or failure
- *             with an internal server.</p>
+ *  <p>The request processing has failed because of an unknown error, exception, or failure with an internal server.</p>
  *
  * @throws {@link ResourceNotFoundException} (client fault)
  *  <p>Indicates that a requested resource is not found.</p>
  *
  * @throws {@link ThrottlingException} (client fault)
- *  <p>Indicates that the principal has crossed the throttling limits of the API
- *             operations.</p>
+ *  <p>Indicates that the principal has crossed the throttling limits of the API operations.</p>
  *
  * @throws {@link ValidationException} (client fault)
  *  <p>The request failed because it contains a syntax error.</p>

package/dist-types/commands/PutApplicationAuthenticationMethodCommand.d.ts

@@ -59,21 +59,16 @@ declare const PutApplicationAuthenticationMethodCommand_base: {
  *  <p>You do not have sufficient access to perform this action.</p>
  *
  * @throws {@link ConflictException} (client fault)
- *  <p>Occurs when a conflict with a previous successful write is detected. This generally
- *             occurs when the previous write did not have time to propagate to the host serving the
- *             current request. A retry (with appropriate backoff logic) is the recommended response to
- *             this exception.</p>
+ *  <p>Occurs when a conflict with a previous successful write is detected. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.</p>
  *
  * @throws {@link InternalServerException} (server fault)
- *  <p>The request processing has failed because of an unknown error, exception, or failure
- *             with an internal server.</p>
+ *  <p>The request processing has failed because of an unknown error, exception, or failure with an internal server.</p>
  *
  * @throws {@link ResourceNotFoundException} (client fault)
  *  <p>Indicates that a requested resource is not found.</p>
  *
  * @throws {@link ThrottlingException} (client fault)
- *  <p>Indicates that the principal has crossed the throttling limits of the API
- *             operations.</p>
+ *  <p>Indicates that the principal has crossed the throttling limits of the API operations.</p>
  *
  * @throws {@link ValidationException} (client fault)
  *  <p>The request failed because it contains a syntax error.</p>

package/dist-types/commands/PutApplicationGrantCommand.d.ts

@@ -27,84 +27,7 @@ declare const PutApplicationGrantCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Creates a configuration for an application to use grants. Conceptually grants are
- *             authorization to request actions related to tokens. This configuration will be used when
- *             parties are requesting and receiving tokens during the trusted identity propagation
- *             process. For more information on the IAM Identity Center supported grant workflows, see <a href="https://docs.aws.amazon.com/singlesignon/latest/userguide/customermanagedapps-saml2-oauth2.html">SAML 2.0
- *                 and OAuth 2.0</a>.</p>
- *          <p>A grant is created between your applications and Identity Center instance which
- *             enables an application to use specified mechanisms to obtain tokens. These tokens are
- *             used by your applications to gain access to Amazon Web Services resources on behalf of users. The
- *             following elements are within these exchanges:</p>
- *          <ul>
- *             <li>
- *                <p>
- *                   <b>Requester</b> - The application requesting access
- *                     to Amazon Web Services resources.</p>
- *             </li>
- *             <li>
- *                <p>
- *                   <b>Subject</b> - Typically the user that is
- *                     requesting access to Amazon Web Services resources.</p>
- *             </li>
- *             <li>
- *                <p>
- *                   <b>Grant</b> - Conceptually, a grant is
- *                     authorization to access Amazon Web Services resources. These grants authorize token generation
- *                     for authenticating access to the requester and for the request to make requests
- *                     on behalf of the subjects. There are four types of grants:</p>
- *                <ul>
- *                   <li>
- *                      <p>
- *                         <b>AuthorizationCode</b> - Allows an
- *                             application to request authorization through a series of user-agent
- *                             redirects.</p>
- *                   </li>
- *                   <li>
- *                      <p>
- *                         <b>JWT bearer </b> - Authorizes an
- *                             application to exchange a JSON Web Token that came from an external
- *                             identity provider. To learn more, see <a href="https://datatracker.ietf.org/doc/html/rfc6749">RFC
- *                             6479</a>.</p>
- *                   </li>
- *                   <li>
- *                      <p>
- *                         <b>Refresh token</b> - Enables application
- *                             to request new access tokens to replace expiring or expired access
- *                             tokens.</p>
- *                   </li>
- *                   <li>
- *                      <p>
- *                         <b>Exchange token</b> - A grant that
- *                             requests tokens from the authorization server by providing a ‘subject’
- *                             token with access scope authorizing trusted identity propagation to this
- *                             application. To learn more, see <a href="https://datatracker.ietf.org/doc/html/rfc8693">RFC
- *                             8693</a>.</p>
- *                   </li>
- *                </ul>
- *             </li>
- *             <li>
- *                <p>
- *                   <b>Authorization server</b> - IAM Identity Center requests
- *                     tokens.</p>
- *             </li>
- *          </ul>
- *          <p>User credentials are never shared directly within these exchanges. Instead,
- *             applications use grants to request access tokens from IAM Identity Center. For more
- *             information, see <a href="https://datatracker.ietf.org/doc/html/rfc6749">RFC
- *                 6479</a>.</p>
- *          <p class="title">
- *             <b>Use cases</b>
- *          </p>
- *          <ul>
- *             <li>
- *                <p>Connecting to custom applications.</p>
- *             </li>
- *             <li>
- *                <p>Configuring an Amazon Web Services service to make calls to another Amazon Web Services services using JWT
- *                     tokens.</p>
- *             </li>
- *          </ul>
+ * <p>Creates a configuration for an application to use grants. Conceptually grants are authorization to request actions related to tokens. This configuration will be used when parties are requesting and receiving tokens during the trusted identity propagation process. For more information on the IAM Identity Center supported grant workflows, see <a href="https://docs.aws.amazon.com/singlesignon/latest/userguide/customermanagedapps-saml2-oauth2.html">SAML 2.0 and OAuth 2.0</a>.</p> <p>A grant is created between your applications and Identity Center instance which enables an application to use specified mechanisms to obtain tokens. These tokens are used by your applications to gain access to Amazon Web Services resources on behalf of users. The following elements are within these exchanges:</p> <ul> <li> <p> <b>Requester</b> - The application requesting access to Amazon Web Services resources.</p> </li> <li> <p> <b>Subject</b> - Typically the user that is requesting access to Amazon Web Services resources.</p> </li> <li> <p> <b>Grant</b> - Conceptually, a grant is authorization to access Amazon Web Services resources. These grants authorize token generation for authenticating access to the requester and for the request to make requests on behalf of the subjects. There are four types of grants:</p> <ul> <li> <p> <b>AuthorizationCode</b> - Allows an application to request authorization through a series of user-agent redirects.</p> </li> <li> <p> <b>JWT bearer </b> - Authorizes an application to exchange a JSON Web Token that came from an external identity provider. To learn more, see <a href="https://datatracker.ietf.org/doc/html/rfc6749">RFC 6479</a>.</p> </li> <li> <p> <b>Refresh token</b> - Enables application to request new access tokens to replace expiring or expired access tokens.</p> </li> <li> <p> <b>Exchange token</b> - A grant that requests tokens from the authorization server by providing a ‘subject’ token with access scope authorizing trusted identity propagation to this application. To learn more, see <a href="https://datatracker.ietf.org/doc/html/rfc8693">RFC 8693</a>.</p> </li> </ul> </li> <li> <p> <b>Authorization server</b> - IAM Identity Center requests tokens.</p> </li> </ul> <p>User credentials are never shared directly within these exchanges. Instead, applications use grants to request access tokens from IAM Identity Center. For more information, see <a href="https://datatracker.ietf.org/doc/html/rfc6749">RFC 6479</a>.</p> <p class="title"> <b>Use cases</b> </p> <ul> <li> <p>Connecting to custom applications.</p> </li> <li> <p>Configuring an Amazon Web Services service to make calls to another Amazon Web Services services using JWT tokens.</p> </li> </ul>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -150,21 +73,16 @@ declare const PutApplicationGrantCommand_base: {
  *  <p>You do not have sufficient access to perform this action.</p>
  *
  * @throws {@link ConflictException} (client fault)
- *  <p>Occurs when a conflict with a previous successful write is detected. This generally
- *             occurs when the previous write did not have time to propagate to the host serving the
- *             current request. A retry (with appropriate backoff logic) is the recommended response to
- *             this exception.</p>
+ *  <p>Occurs when a conflict with a previous successful write is detected. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.</p>
  *
  * @throws {@link InternalServerException} (server fault)
- *  <p>The request processing has failed because of an unknown error, exception, or failure
- *             with an internal server.</p>
+ *  <p>The request processing has failed because of an unknown error, exception, or failure with an internal server.</p>
  *
  * @throws {@link ResourceNotFoundException} (client fault)
  *  <p>Indicates that a requested resource is not found.</p>
  *
  * @throws {@link ThrottlingException} (client fault)
- *  <p>Indicates that the principal has crossed the throttling limits of the API
- *             operations.</p>
+ *  <p>Indicates that the principal has crossed the throttling limits of the API operations.</p>
  *
  * @throws {@link ValidationException} (client fault)
  *  <p>The request failed because it contains a syntax error.</p>

package/dist-types/commands/PutApplicationSessionConfigurationCommand.d.ts

@@ -0,0 +1,89 @@
+import { Command as $Command } from "@smithy/smithy-client";
+import { MetadataBearer as __MetadataBearer } from "@smithy/types";
+import { PutApplicationSessionConfigurationRequest, PutApplicationSessionConfigurationResponse } from "../models/models_0";
+import { ServiceInputTypes, ServiceOutputTypes, SSOAdminClientResolvedConfig } from "../SSOAdminClient";
+/**
+ * @public
+ */
+export type { __MetadataBearer };
+export { $Command };
+/**
+ * @public
+ *
+ * The input for {@link PutApplicationSessionConfigurationCommand}.
+ */
+export interface PutApplicationSessionConfigurationCommandInput extends PutApplicationSessionConfigurationRequest {
+}
+/**
+ * @public
+ *
+ * The output of {@link PutApplicationSessionConfigurationCommand}.
+ */
+export interface PutApplicationSessionConfigurationCommandOutput extends PutApplicationSessionConfigurationResponse, __MetadataBearer {
+}
+declare const PutApplicationSessionConfigurationCommand_base: {
+    new (input: PutApplicationSessionConfigurationCommandInput): import("@smithy/smithy-client").CommandImpl<PutApplicationSessionConfigurationCommandInput, PutApplicationSessionConfigurationCommandOutput, SSOAdminClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes>;
+    new (input: PutApplicationSessionConfigurationCommandInput): import("@smithy/smithy-client").CommandImpl<PutApplicationSessionConfigurationCommandInput, PutApplicationSessionConfigurationCommandOutput, SSOAdminClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes>;
+    getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
+};
+/**
+ * <p>Updates the session configuration for an application in IAM Identity Center.</p> <p>The session configuration determines how users can access an application. This includes whether user background sessions are enabled. User background sessions allow users to start a job on a supported Amazon Web Services managed application without having to remain signed in to an active session while the job runs.</p>
+ * @example
+ * Use a bare-bones client and the command you need to make an API call.
+ * ```javascript
+ * import { SSOAdminClient, PutApplicationSessionConfigurationCommand } from "@aws-sdk/client-sso-admin"; // ES Modules import
+ * // const { SSOAdminClient, PutApplicationSessionConfigurationCommand } = require("@aws-sdk/client-sso-admin"); // CommonJS import
+ * const client = new SSOAdminClient(config);
+ * const input = { // PutApplicationSessionConfigurationRequest
+ *   ApplicationArn: "STRING_VALUE", // required
+ *   UserBackgroundSessionApplicationStatus: "ENABLED" || "DISABLED",
+ * };
+ * const command = new PutApplicationSessionConfigurationCommand(input);
+ * const response = await client.send(command);
+ * // {};
+ *
+ * ```
+ *
+ * @param PutApplicationSessionConfigurationCommandInput - {@link PutApplicationSessionConfigurationCommandInput}
+ * @returns {@link PutApplicationSessionConfigurationCommandOutput}
+ * @see {@link PutApplicationSessionConfigurationCommandInput} for command's `input` shape.
+ * @see {@link PutApplicationSessionConfigurationCommandOutput} for command's `response` shape.
+ * @see {@link SSOAdminClientResolvedConfig | config} for SSOAdminClient's `config` shape.
+ *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>You do not have sufficient access to perform this action.</p>
+ *
+ * @throws {@link ConflictException} (client fault)
+ *  <p>Occurs when a conflict with a previous successful write is detected. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.</p>
+ *
+ * @throws {@link InternalServerException} (server fault)
+ *  <p>The request processing has failed because of an unknown error, exception, or failure with an internal server.</p>
+ *
+ * @throws {@link ResourceNotFoundException} (client fault)
+ *  <p>Indicates that a requested resource is not found.</p>
+ *
+ * @throws {@link ThrottlingException} (client fault)
+ *  <p>Indicates that the principal has crossed the throttling limits of the API operations.</p>
+ *
+ * @throws {@link ValidationException} (client fault)
+ *  <p>The request failed because it contains a syntax error.</p>
+ *
+ * @throws {@link SSOAdminServiceException}
+ * <p>Base exception class for all service exceptions from SSOAdmin service.</p>
+ *
+ *
+ * @public
+ */
+export declare class PutApplicationSessionConfigurationCommand extends PutApplicationSessionConfigurationCommand_base {
+    /** @internal type navigation helper, not in runtime. */
+    protected static __types: {
+        api: {
+            input: PutApplicationSessionConfigurationRequest;
+            output: {};
+        };
+        sdk: {
+            input: PutApplicationSessionConfigurationCommandInput;
+            output: PutApplicationSessionConfigurationCommandOutput;
+        };
+    };
+}

package/dist-types/commands/PutInlinePolicyToPermissionSetCommand.d.ts

@@ -27,15 +27,7 @@ declare const PutInlinePolicyToPermissionSetCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Attaches an inline policy to a permission set.</p>
- *          <note>
- *             <p>If the permission set is already referenced by one or more account assignments,
- *                 you will need to call <code>
- *                   <a>ProvisionPermissionSet</a>
- *                </code> after
- *                 this action to apply the corresponding IAM policy updates to all assigned
- *                 accounts.</p>
- *          </note>
+ * <p>Attaches an inline policy to a permission set.</p> <note> <p>If the permission set is already referenced by one or more account assignments, you will need to call <code> <a>ProvisionPermissionSet</a> </code> after this action to apply the corresponding IAM policy updates to all assigned accounts.</p> </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -63,25 +55,19 @@ declare const PutInlinePolicyToPermissionSetCommand_base: {
  *  <p>You do not have sufficient access to perform this action.</p>
  *
  * @throws {@link ConflictException} (client fault)
- *  <p>Occurs when a conflict with a previous successful write is detected. This generally
- *             occurs when the previous write did not have time to propagate to the host serving the
- *             current request. A retry (with appropriate backoff logic) is the recommended response to
- *             this exception.</p>
+ *  <p>Occurs when a conflict with a previous successful write is detected. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.</p>
  *
  * @throws {@link InternalServerException} (server fault)
- *  <p>The request processing has failed because of an unknown error, exception, or failure
- *             with an internal server.</p>
+ *  <p>The request processing has failed because of an unknown error, exception, or failure with an internal server.</p>
  *
  * @throws {@link ResourceNotFoundException} (client fault)
  *  <p>Indicates that a requested resource is not found.</p>
  *
  * @throws {@link ServiceQuotaExceededException} (client fault)
- *  <p>Indicates that the principal has crossed the permitted number of resources that can be
- *             created.</p>
+ *  <p>Indicates that the principal has crossed the permitted number of resources that can be created.</p>
  *
  * @throws {@link ThrottlingException} (client fault)
- *  <p>Indicates that the principal has crossed the throttling limits of the API
- *             operations.</p>
+ *  <p>Indicates that the principal has crossed the throttling limits of the API operations.</p>
  *
  * @throws {@link ValidationException} (client fault)
  *  <p>The request failed because it contains a syntax error.</p>

package/dist-types/commands/PutPermissionsBoundaryToPermissionSetCommand.d.ts

@@ -61,21 +61,16 @@ declare const PutPermissionsBoundaryToPermissionSetCommand_base: {
  *  <p>You do not have sufficient access to perform this action.</p>
  *
  * @throws {@link ConflictException} (client fault)
- *  <p>Occurs when a conflict with a previous successful write is detected. This generally
- *             occurs when the previous write did not have time to propagate to the host serving the
- *             current request. A retry (with appropriate backoff logic) is the recommended response to
- *             this exception.</p>
+ *  <p>Occurs when a conflict with a previous successful write is detected. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.</p>
  *
  * @throws {@link InternalServerException} (server fault)
- *  <p>The request processing has failed because of an unknown error, exception, or failure
- *             with an internal server.</p>
+ *  <p>The request processing has failed because of an unknown error, exception, or failure with an internal server.</p>
  *
  * @throws {@link ResourceNotFoundException} (client fault)
  *  <p>Indicates that a requested resource is not found.</p>
  *
  * @throws {@link ThrottlingException} (client fault)
- *  <p>Indicates that the principal has crossed the throttling limits of the API
- *             operations.</p>
+ *  <p>Indicates that the principal has crossed the throttling limits of the API operations.</p>
  *
  * @throws {@link ValidationException} (client fault)
  *  <p>The request failed because it contains a syntax error.</p>

package/dist-types/commands/TagResourceCommand.d.ts

@@ -60,25 +60,19 @@ declare const TagResourceCommand_base: {
  *  <p>You do not have sufficient access to perform this action.</p>
  *
  * @throws {@link ConflictException} (client fault)
- *  <p>Occurs when a conflict with a previous successful write is detected. This generally
- *             occurs when the previous write did not have time to propagate to the host serving the
- *             current request. A retry (with appropriate backoff logic) is the recommended response to
- *             this exception.</p>
+ *  <p>Occurs when a conflict with a previous successful write is detected. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.</p>
  *
  * @throws {@link InternalServerException} (server fault)
- *  <p>The request processing has failed because of an unknown error, exception, or failure
- *             with an internal server.</p>
+ *  <p>The request processing has failed because of an unknown error, exception, or failure with an internal server.</p>
  *
  * @throws {@link ResourceNotFoundException} (client fault)
  *  <p>Indicates that a requested resource is not found.</p>
  *
  * @throws {@link ServiceQuotaExceededException} (client fault)
- *  <p>Indicates that the principal has crossed the permitted number of resources that can be
- *             created.</p>
+ *  <p>Indicates that the principal has crossed the permitted number of resources that can be created.</p>
  *
  * @throws {@link ThrottlingException} (client fault)
- *  <p>Indicates that the principal has crossed the throttling limits of the API
- *             operations.</p>
+ *  <p>Indicates that the principal has crossed the throttling limits of the API operations.</p>
  *
  * @throws {@link ValidationException} (client fault)
  *  <p>The request failed because it contains a syntax error.</p>

package/dist-types/commands/UntagResourceCommand.d.ts

@@ -57,21 +57,16 @@ declare const UntagResourceCommand_base: {
  *  <p>You do not have sufficient access to perform this action.</p>
  *
  * @throws {@link ConflictException} (client fault)
- *  <p>Occurs when a conflict with a previous successful write is detected. This generally
- *             occurs when the previous write did not have time to propagate to the host serving the
- *             current request. A retry (with appropriate backoff logic) is the recommended response to
- *             this exception.</p>
+ *  <p>Occurs when a conflict with a previous successful write is detected. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.</p>
  *
  * @throws {@link InternalServerException} (server fault)
- *  <p>The request processing has failed because of an unknown error, exception, or failure
- *             with an internal server.</p>
+ *  <p>The request processing has failed because of an unknown error, exception, or failure with an internal server.</p>
  *
  * @throws {@link ResourceNotFoundException} (client fault)
  *  <p>Indicates that a requested resource is not found.</p>
  *
  * @throws {@link ThrottlingException} (client fault)
- *  <p>Indicates that the principal has crossed the throttling limits of the API
- *             operations.</p>
+ *  <p>Indicates that the principal has crossed the throttling limits of the API operations.</p>
  *
  * @throws {@link ValidationException} (client fault)
  *  <p>The request failed because it contains a syntax error.</p>

package/dist-types/commands/UpdateApplicationCommand.d.ts

@@ -62,21 +62,16 @@ declare const UpdateApplicationCommand_base: {
  *  <p>You do not have sufficient access to perform this action.</p>
  *
  * @throws {@link ConflictException} (client fault)
- *  <p>Occurs when a conflict with a previous successful write is detected. This generally
- *             occurs when the previous write did not have time to propagate to the host serving the
- *             current request. A retry (with appropriate backoff logic) is the recommended response to
- *             this exception.</p>
+ *  <p>Occurs when a conflict with a previous successful write is detected. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.</p>
  *
  * @throws {@link InternalServerException} (server fault)
- *  <p>The request processing has failed because of an unknown error, exception, or failure
- *             with an internal server.</p>
+ *  <p>The request processing has failed because of an unknown error, exception, or failure with an internal server.</p>
  *
  * @throws {@link ResourceNotFoundException} (client fault)
  *  <p>Indicates that a requested resource is not found.</p>
  *
  * @throws {@link ThrottlingException} (client fault)
- *  <p>Indicates that the principal has crossed the throttling limits of the API
- *             operations.</p>
+ *  <p>Indicates that the principal has crossed the throttling limits of the API operations.</p>
  *
  * @throws {@link ValidationException} (client fault)
  *  <p>The request failed because it contains a syntax error.</p>

package/dist-types/commands/UpdateInstanceAccessControlAttributeConfigurationCommand.d.ts

@@ -27,12 +27,7 @@ declare const UpdateInstanceAccessControlAttributeConfigurationCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Updates the IAM Identity Center identity store attributes that you can use with the IAM Identity Center instance
- *             for attributes-based access control (ABAC). When using an external identity provider as
- *             an identity source, you can pass attributes through the SAML assertion as an alternative
- *             to configuring attributes from the IAM Identity Center identity store. If a SAML assertion passes any
- *             of these attributes, IAM Identity Center replaces the attribute value with the value from the IAM Identity Center
- *             identity store. For more information about ABAC, see <a href="/singlesignon/latest/userguide/abac.html">Attribute-Based Access Control</a> in the <i>IAM Identity Center User Guide</i>.</p>
+ * <p>Updates the IAM Identity Center identity store attributes that you can use with the IAM Identity Center instance for attributes-based access control (ABAC). When using an external identity provider as an identity source, you can pass attributes through the SAML assertion as an alternative to configuring attributes from the IAM Identity Center identity store. If a SAML assertion passes any of these attributes, IAM Identity Center replaces the attribute value with the value from the IAM Identity Center identity store. For more information about ABAC, see <a href="/singlesignon/latest/userguide/abac.html">Attribute-Based Access Control</a> in the <i>IAM Identity Center User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -70,21 +65,16 @@ declare const UpdateInstanceAccessControlAttributeConfigurationCommand_base: {
  *  <p>You do not have sufficient access to perform this action.</p>
  *
  * @throws {@link ConflictException} (client fault)
- *  <p>Occurs when a conflict with a previous successful write is detected. This generally
- *             occurs when the previous write did not have time to propagate to the host serving the
- *             current request. A retry (with appropriate backoff logic) is the recommended response to
- *             this exception.</p>
+ *  <p>Occurs when a conflict with a previous successful write is detected. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.</p>
  *
  * @throws {@link InternalServerException} (server fault)
- *  <p>The request processing has failed because of an unknown error, exception, or failure
- *             with an internal server.</p>
+ *  <p>The request processing has failed because of an unknown error, exception, or failure with an internal server.</p>
  *
  * @throws {@link ResourceNotFoundException} (client fault)
  *  <p>Indicates that a requested resource is not found.</p>
  *
  * @throws {@link ThrottlingException} (client fault)
- *  <p>Indicates that the principal has crossed the throttling limits of the API
- *             operations.</p>
+ *  <p>Indicates that the principal has crossed the throttling limits of the API operations.</p>
  *
  * @throws {@link ValidationException} (client fault)
  *  <p>The request failed because it contains a syntax error.</p>

package/dist-types/commands/UpdateInstanceCommand.d.ts

@@ -27,8 +27,7 @@ declare const UpdateInstanceCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Update the details for the instance of IAM Identity Center that is owned by the
- *             Amazon Web Services account.</p>
+ * <p>Update the details for the instance of IAM Identity Center that is owned by the Amazon Web Services account.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -55,18 +54,13 @@ declare const UpdateInstanceCommand_base: {
  *  <p>You do not have sufficient access to perform this action.</p>
  *
  * @throws {@link ConflictException} (client fault)
- *  <p>Occurs when a conflict with a previous successful write is detected. This generally
- *             occurs when the previous write did not have time to propagate to the host serving the
- *             current request. A retry (with appropriate backoff logic) is the recommended response to
- *             this exception.</p>
+ *  <p>Occurs when a conflict with a previous successful write is detected. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.</p>
  *
  * @throws {@link InternalServerException} (server fault)
- *  <p>The request processing has failed because of an unknown error, exception, or failure
- *             with an internal server.</p>
+ *  <p>The request processing has failed because of an unknown error, exception, or failure with an internal server.</p>
  *
  * @throws {@link ThrottlingException} (client fault)
- *  <p>Indicates that the principal has crossed the throttling limits of the API
- *             operations.</p>
+ *  <p>Indicates that the principal has crossed the throttling limits of the API operations.</p>
  *
  * @throws {@link ValidationException} (client fault)
  *  <p>The request failed because it contains a syntax error.</p>

package/dist-types/commands/UpdatePermissionSetCommand.d.ts

@@ -57,21 +57,16 @@ declare const UpdatePermissionSetCommand_base: {
  *  <p>You do not have sufficient access to perform this action.</p>
  *
  * @throws {@link ConflictException} (client fault)
- *  <p>Occurs when a conflict with a previous successful write is detected. This generally
- *             occurs when the previous write did not have time to propagate to the host serving the
- *             current request. A retry (with appropriate backoff logic) is the recommended response to
- *             this exception.</p>
+ *  <p>Occurs when a conflict with a previous successful write is detected. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.</p>
  *
  * @throws {@link InternalServerException} (server fault)
- *  <p>The request processing has failed because of an unknown error, exception, or failure
- *             with an internal server.</p>
+ *  <p>The request processing has failed because of an unknown error, exception, or failure with an internal server.</p>
  *
  * @throws {@link ResourceNotFoundException} (client fault)
  *  <p>Indicates that a requested resource is not found.</p>
  *
  * @throws {@link ThrottlingException} (client fault)
- *  <p>Indicates that the principal has crossed the throttling limits of the API
- *             operations.</p>
+ *  <p>Indicates that the principal has crossed the throttling limits of the API operations.</p>
  *
  * @throws {@link ValidationException} (client fault)
  *  <p>The request failed because it contains a syntax error.</p>

package/dist-types/commands/UpdateTrustedTokenIssuerCommand.d.ts

@@ -27,12 +27,7 @@ declare const UpdateTrustedTokenIssuerCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Updates the name of the trusted token issuer, or the path of a source attribute or destination
- *             attribute for a trusted token issuer configuration.</p>
- *          <note>
- *             <p>Updating this trusted token issuer configuration might cause users to lose access to any
- *                 applications that are configured to use the trusted token issuer.</p>
- *          </note>
+ * <p>Updates the name of the trusted token issuer, or the path of a source attribute or destination attribute for a trusted token issuer configuration.</p> <note> <p>Updating this trusted token issuer configuration might cause users to lose access to any applications that are configured to use the trusted token issuer.</p> </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -66,21 +61,16 @@ declare const UpdateTrustedTokenIssuerCommand_base: {
  *  <p>You do not have sufficient access to perform this action.</p>
  *
  * @throws {@link ConflictException} (client fault)
- *  <p>Occurs when a conflict with a previous successful write is detected. This generally
- *             occurs when the previous write did not have time to propagate to the host serving the
- *             current request. A retry (with appropriate backoff logic) is the recommended response to
- *             this exception.</p>
+ *  <p>Occurs when a conflict with a previous successful write is detected. This generally occurs when the previous write did not have time to propagate to the host serving the current request. A retry (with appropriate backoff logic) is the recommended response to this exception.</p>
  *
  * @throws {@link InternalServerException} (server fault)
- *  <p>The request processing has failed because of an unknown error, exception, or failure
- *             with an internal server.</p>
+ *  <p>The request processing has failed because of an unknown error, exception, or failure with an internal server.</p>
  *
  * @throws {@link ResourceNotFoundException} (client fault)
  *  <p>Indicates that a requested resource is not found.</p>
  *
  * @throws {@link ThrottlingException} (client fault)
- *  <p>Indicates that the principal has crossed the throttling limits of the API
- *             operations.</p>
+ *  <p>Indicates that the principal has crossed the throttling limits of the API operations.</p>
  *
  * @throws {@link ValidationException} (client fault)
  *  <p>The request failed because it contains a syntax error.</p>

package/dist-types/commands/index.d.ts

@@ -35,6 +35,7 @@ export * from "./GetApplicationAccessScopeCommand";
 export * from "./GetApplicationAssignmentConfigurationCommand";
 export * from "./GetApplicationAuthenticationMethodCommand";
 export * from "./GetApplicationGrantCommand";
+export * from "./GetApplicationSessionConfigurationCommand";
 export * from "./GetInlinePolicyForPermissionSetCommand";
 export * from "./GetPermissionsBoundaryForPermissionSetCommand";
 export * from "./ListAccountAssignmentCreationStatusCommand";
@@ -62,6 +63,7 @@ export * from "./PutApplicationAccessScopeCommand";
 export * from "./PutApplicationAssignmentConfigurationCommand";
 export * from "./PutApplicationAuthenticationMethodCommand";
 export * from "./PutApplicationGrantCommand";
+export * from "./PutApplicationSessionConfigurationCommand";
 export * from "./PutInlinePolicyToPermissionSetCommand";
 export * from "./PutPermissionsBoundaryToPermissionSetCommand";
 export * from "./TagResourceCommand";