@aws-sdk/client-sesv2 3.857.0 → 3.858.0

package/dist-types/models/models_1.d.ts

@@ -1,4 +1,519 @@
-import { BehaviorOnMxFailure, BulkEmailContent, BulkEmailEntry, BulkEmailEntryResult, Destination, DkimSigningAttributes, DkimSigningAttributesOrigin, DkimStatus, DomainDeliverabilityTrackingOption, EmailContent, EmailTemplateContent, EventDestinationDefinition, HttpsPolicy, ListManagementOptions, MessageTag, ScalingMode, SuppressionListReason, Tag, Topic, TopicPreference, VdmOptions } from "./models_0";
+import { BehaviorOnMxFailure, BulkEmailContent, BulkEmailEntry, BulkEmailEntryResult, ContactLanguage, Destination, DkimSigningAttributes, DkimSigningAttributesOrigin, DkimStatus, DomainDeliverabilityTrackingOption, EmailContent, EmailTemplateContent, EventDestinationDefinition, HttpsPolicy, ListManagementOptions, MailType, MessageTag, ReputationEntityType, ScalingMode, SendingStatus, SuppressionListReason, Tag, TlsPolicy, Topic, TopicPreference, VdmAttributes, VdmOptions } from "./models_0";
+/**
+ * <p>A request to obtain a list of email destinations that are on the suppression list for
+ *             your account.</p>
+ * @public
+ */
+export interface ListSuppressedDestinationsRequest {
+    /**
+     * <p>The factors that caused the email address to be added to .</p>
+     * @public
+     */
+    Reasons?: SuppressionListReason[] | undefined;
+    /**
+     * <p>Used to filter the list of suppressed email destinations so that it only includes
+     *             addresses that were added to the list after a specific date.</p>
+     * @public
+     */
+    StartDate?: Date | undefined;
+    /**
+     * <p>Used to filter the list of suppressed email destinations so that it only includes
+     *             addresses that were added to the list before a specific date.</p>
+     * @public
+     */
+    EndDate?: Date | undefined;
+    /**
+     * <p>A token returned from a previous call to <code>ListSuppressedDestinations</code> to
+     *             indicate the position in the list of suppressed email addresses.</p>
+     * @public
+     */
+    NextToken?: string | undefined;
+    /**
+     * <p>The number of results to show in a single call to
+     *                 <code>ListSuppressedDestinations</code>. If the number of results is larger than the
+     *             number you specified in this parameter, then the response includes a
+     *                 <code>NextToken</code> element, which you can use to obtain additional
+     *             results.</p>
+     * @public
+     */
+    PageSize?: number | undefined;
+}
+/**
+ * <p>A summary that describes the suppressed email address.</p>
+ * @public
+ */
+export interface SuppressedDestinationSummary {
+    /**
+     * <p>The email address that's on the suppression list for your account.</p>
+     * @public
+     */
+    EmailAddress: string | undefined;
+    /**
+     * <p>The reason that the address was added to the suppression list for your account.</p>
+     * @public
+     */
+    Reason: SuppressionListReason | undefined;
+    /**
+     * <p>The date and time when the suppressed destination was last updated, shown in Unix time
+     *             format.</p>
+     * @public
+     */
+    LastUpdateTime: Date | undefined;
+}
+/**
+ * <p>A list of suppressed email addresses.</p>
+ * @public
+ */
+export interface ListSuppressedDestinationsResponse {
+    /**
+     * <p>A list of summaries, each containing a summary for a suppressed email
+     *             destination.</p>
+     * @public
+     */
+    SuppressedDestinationSummaries?: SuppressedDestinationSummary[] | undefined;
+    /**
+     * <p>A token that indicates that there are additional email addresses on the suppression
+     *             list for your account. To view additional suppressed addresses, issue another request to
+     *                 <code>ListSuppressedDestinations</code>, and pass this token in the
+     *                 <code>NextToken</code> parameter.</p>
+     * @public
+     */
+    NextToken?: string | undefined;
+}
+/**
+ * @public
+ */
+export interface ListTagsForResourceRequest {
+    /**
+     * <p>The Amazon Resource Name (ARN) of the resource that you want to retrieve tag
+     *             information for.</p>
+     * @public
+     */
+    ResourceArn: string | undefined;
+}
+/**
+ * @public
+ */
+export interface ListTagsForResourceResponse {
+    /**
+     * <p>An array that lists all the tags that are associated with the resource. Each tag
+     *             consists of a required tag key (<code>Key</code>) and an associated tag value
+     *                 (<code>Value</code>)</p>
+     * @public
+     */
+    Tags: Tag[] | undefined;
+}
+/**
+ * @public
+ * @enum
+ */
+export declare const ListTenantResourcesFilterKey: {
+    readonly RESOURCE_TYPE: "RESOURCE_TYPE";
+};
+/**
+ * @public
+ */
+export type ListTenantResourcesFilterKey = (typeof ListTenantResourcesFilterKey)[keyof typeof ListTenantResourcesFilterKey];
+/**
+ * <p>Represents a request to list resources associated with a specific tenant.</p>
+ * @public
+ */
+export interface ListTenantResourcesRequest {
+    /**
+     * <p>The name of the tenant to list resources for.</p>
+     * @public
+     */
+    TenantName: string | undefined;
+    /**
+     * <p>A map of filter keys and values for filtering the list of tenant resources. Currently,
+     *             the only supported filter key is <code>RESOURCE_TYPE</code>.</p>
+     * @public
+     */
+    Filter?: Partial<Record<ListTenantResourcesFilterKey, string>> | undefined;
+    /**
+     * <p>The number of results to show in a single call to <code>ListTenantResources</code>.
+     *             If the number of results is larger than the number you specified in this parameter,
+     *             then the response includes a <code>NextToken</code> element, which you can use to obtain additional results.</p>
+     * @public
+     */
+    PageSize?: number | undefined;
+    /**
+     * <p>A token returned from a previous call to <code>ListTenantResources</code> to indicate the position in the list of tenant resources.</p>
+     * @public
+     */
+    NextToken?: string | undefined;
+}
+/**
+ * @public
+ * @enum
+ */
+export declare const ResourceType: {
+    readonly CONFIGURATION_SET: "CONFIGURATION_SET";
+    readonly EMAIL_IDENTITY: "EMAIL_IDENTITY";
+    readonly EMAIL_TEMPLATE: "EMAIL_TEMPLATE";
+};
+/**
+ * @public
+ */
+export type ResourceType = (typeof ResourceType)[keyof typeof ResourceType];
+/**
+ * <p>A structure that contains information about a resource associated with a tenant.</p>
+ * @public
+ */
+export interface TenantResource {
+    /**
+     * <p>The type of resource associated with the tenant. Valid values are <code>EMAIL_IDENTITY</code>,
+     *             <code>CONFIGURATION_SET</code>, or <code>EMAIL_TEMPLATE</code>.</p>
+     * @public
+     */
+    ResourceType?: ResourceType | undefined;
+    /**
+     * <p>The Amazon Resource Name (ARN) of the resource associated with the tenant.</p>
+     * @public
+     */
+    ResourceArn?: string | undefined;
+}
+/**
+ * <p>Information about resources associated with a specific tenant.</p>
+ * @public
+ */
+export interface ListTenantResourcesResponse {
+    /**
+     * <p>An array that contains information about each resource associated with the tenant.</p>
+     * @public
+     */
+    TenantResources?: TenantResource[] | undefined;
+    /**
+     * <p>A token that indicates that there are additional resources to list. To view additional resources,
+     *             issue another request to <code>ListTenantResources</code>, and pass this token in the <code>NextToken</code> parameter.</p>
+     * @public
+     */
+    NextToken?: string | undefined;
+}
+/**
+ * <p>Represents a request to list all tenants associated with your account in the current Amazon Web Services Region.</p>
+ * @public
+ */
+export interface ListTenantsRequest {
+    /**
+     * <p>A token returned from a previous call to <code>ListTenants</code> to indicate the position in the list of tenants.</p>
+     * @public
+     */
+    NextToken?: string | undefined;
+    /**
+     * <p>The number of results to show in a single call to <code>ListTenants</code>.
+     *             If the number of results is larger than the number you specified in this parameter,
+     *             then the response includes a <code>NextToken</code> element, which you can use to obtain additional results.</p>
+     * @public
+     */
+    PageSize?: number | undefined;
+}
+/**
+ * <p>A structure that contains basic information about a tenant.</p>
+ * @public
+ */
+export interface TenantInfo {
+    /**
+     * <p>The name of the tenant.</p>
+     * @public
+     */
+    TenantName?: string | undefined;
+    /**
+     * <p>A unique identifier for the tenant.</p>
+     * @public
+     */
+    TenantId?: string | undefined;
+    /**
+     * <p>The Amazon Resource Name (ARN) of the tenant.</p>
+     * @public
+     */
+    TenantArn?: string | undefined;
+    /**
+     * <p>The date and time when the tenant was created.</p>
+     * @public
+     */
+    CreatedTimestamp?: Date | undefined;
+}
+/**
+ * <p>Information about tenants associated with your account.</p>
+ * @public
+ */
+export interface ListTenantsResponse {
+    /**
+     * <p>An array that contains basic information about each tenant.</p>
+     * @public
+     */
+    Tenants?: TenantInfo[] | undefined;
+    /**
+     * <p>A token that indicates that there are additional tenants to list. To view additional tenants,
+     *             issue another request to <code>ListTenants</code>, and pass this token in the <code>NextToken</code> parameter.</p>
+     * @public
+     */
+    NextToken?: string | undefined;
+}
+/**
+ * <p>A request to enable or disable the automatic IP address warm-up feature.</p>
+ * @public
+ */
+export interface PutAccountDedicatedIpWarmupAttributesRequest {
+    /**
+     * <p>Enables or disables the automatic warm-up feature for dedicated IP addresses that are
+     *             associated with your Amazon SES account in the current Amazon Web Services Region. Set to <code>true</code>
+     *             to enable the automatic warm-up feature, or set to <code>false</code> to disable
+     *             it.</p>
+     * @public
+     */
+    AutoWarmupEnabled?: boolean | undefined;
+}
+/**
+ * <p>An HTTP 200 response if the request succeeds, or an error message if the request
+ *             fails.</p>
+ * @public
+ */
+export interface PutAccountDedicatedIpWarmupAttributesResponse {
+}
+/**
+ * <p>A request to submit new account details.</p>
+ * @public
+ */
+export interface PutAccountDetailsRequest {
+    /**
+     * <p>The type of email your account will send.</p>
+     * @public
+     */
+    MailType: MailType | undefined;
+    /**
+     * <p>The URL of your website. This information helps us better understand the type of
+     *             content that you plan to send.</p>
+     * @public
+     */
+    WebsiteURL: string | undefined;
+    /**
+     * <p>The language you would prefer to be contacted with.</p>
+     * @public
+     */
+    ContactLanguage?: ContactLanguage | undefined;
+    /**
+     * <p>A description of the types of email that you plan to send.</p>
+     *
+     * @deprecated
+     * @public
+     */
+    UseCaseDescription?: string | undefined;
+    /**
+     * <p>Additional email addresses that you would like to be notified regarding Amazon SES
+     *             matters.</p>
+     * @public
+     */
+    AdditionalContactEmailAddresses?: string[] | undefined;
+    /**
+     * <p>Indicates whether or not your account should have production access in the current
+     *             Amazon Web Services Region.</p>
+     *          <p>If the value is <code>false</code>, then your account is in the
+     *                 <i>sandbox</i>. When your account is in the sandbox, you can only send
+     *             email to verified identities.
+     *             </p>
+     *          <p>If the value is <code>true</code>, then your account has production access. When your
+     *             account has production access, you can send email to any address. The sending quota and
+     *             maximum sending rate for your account vary based on your specific use case.</p>
+     * @public
+     */
+    ProductionAccessEnabled?: boolean | undefined;
+}
+/**
+ * <p>An HTTP 200 response if the request succeeds, or an error message if the request
+ *             fails.</p>
+ * @public
+ */
+export interface PutAccountDetailsResponse {
+}
+/**
+ * <p>A request to change the ability of your account to send email.</p>
+ * @public
+ */
+export interface PutAccountSendingAttributesRequest {
+    /**
+     * <p>Enables or disables your account's ability to send email. Set to <code>true</code> to
+     *             enable email sending, or set to <code>false</code> to disable email sending.</p>
+     *          <note>
+     *             <p>If Amazon Web Services paused your account's ability to send email, you can't use this operation
+     *                 to resume your account's ability to send email.</p>
+     *          </note>
+     * @public
+     */
+    SendingEnabled?: boolean | undefined;
+}
+/**
+ * <p>An HTTP 200 response if the request succeeds, or an error message if the request
+ *             fails.</p>
+ * @public
+ */
+export interface PutAccountSendingAttributesResponse {
+}
+/**
+ * <p>A request to change your account's suppression preferences.</p>
+ * @public
+ */
+export interface PutAccountSuppressionAttributesRequest {
+    /**
+     * <p>A list that contains the reasons that email addresses will be automatically added to
+     *             the suppression list for your account. This list can contain any or all of the
+     *             following:</p>
+     *          <ul>
+     *             <li>
+     *                <p>
+     *                   <code>COMPLAINT</code> – Amazon SES adds an email address to the suppression
+     *                     list for your account when a message sent to that address results in a
+     *                     complaint.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>BOUNCE</code> – Amazon SES adds an email address to the suppression
+     *                     list for your account when a message sent to that address results in a hard
+     *                     bounce.</p>
+     *             </li>
+     *          </ul>
+     * @public
+     */
+    SuppressedReasons?: SuppressionListReason[] | undefined;
+}
+/**
+ * <p>An HTTP 200 response if the request succeeds, or an error message if the request
+ *             fails.</p>
+ * @public
+ */
+export interface PutAccountSuppressionAttributesResponse {
+}
+/**
+ * <p>A request to submit new account VDM attributes.</p>
+ * @public
+ */
+export interface PutAccountVdmAttributesRequest {
+    /**
+     * <p>The VDM attributes that you wish to apply to your Amazon SES account.</p>
+     * @public
+     */
+    VdmAttributes: VdmAttributes | undefined;
+}
+/**
+ * @public
+ */
+export interface PutAccountVdmAttributesResponse {
+}
+/**
+ * <p>A request to associate a configuration set with a MailManager archive.</p>
+ * @public
+ */
+export interface PutConfigurationSetArchivingOptionsRequest {
+    /**
+     * <p>The name of the configuration set to associate with a MailManager archive.</p>
+     * @public
+     */
+    ConfigurationSetName: string | undefined;
+    /**
+     * <p>The Amazon Resource Name (ARN) of the MailManager archive that the Amazon SES API v2 sends email
+     *             to.</p>
+     * @public
+     */
+    ArchiveArn?: string | undefined;
+}
+/**
+ * <p>An HTTP 200 response if the request succeeds, or an error message if the request
+ *             fails.</p>
+ * @public
+ */
+export interface PutConfigurationSetArchivingOptionsResponse {
+}
+/**
+ * <p>A request to associate a configuration set with a dedicated IP pool.</p>
+ * @public
+ */
+export interface PutConfigurationSetDeliveryOptionsRequest {
+    /**
+     * <p>The name of the configuration set to associate with a dedicated IP pool.</p>
+     * @public
+     */
+    ConfigurationSetName: string | undefined;
+    /**
+     * <p>Specifies whether messages that use the configuration set are required to use
+     *             Transport Layer Security (TLS). If the value is <code>Require</code>, messages are only
+     *             delivered if a TLS connection can be established. If the value is <code>Optional</code>,
+     *             messages can be delivered in plain text if a TLS connection can't be established.</p>
+     * @public
+     */
+    TlsPolicy?: TlsPolicy | undefined;
+    /**
+     * <p>The name of the dedicated IP pool to associate with the configuration set.</p>
+     * @public
+     */
+    SendingPoolName?: string | undefined;
+    /**
+     * <p>The maximum amount of time, in seconds, that Amazon SES API v2 will attempt delivery of email.
+     *             If specified, the value must greater than or equal to 300 seconds (5 minutes)
+     *             and less than or equal to 50400 seconds (840 minutes).
+     *         </p>
+     * @public
+     */
+    MaxDeliverySeconds?: number | undefined;
+}
+/**
+ * <p>An HTTP 200 response if the request succeeds, or an error message if the request
+ *             fails.</p>
+ * @public
+ */
+export interface PutConfigurationSetDeliveryOptionsResponse {
+}
+/**
+ * <p>A request to enable or disable tracking of reputation metrics for a configuration
+ *             set.</p>
+ * @public
+ */
+export interface PutConfigurationSetReputationOptionsRequest {
+    /**
+     * <p>The name of the configuration set.</p>
+     * @public
+     */
+    ConfigurationSetName: string | undefined;
+    /**
+     * <p>If <code>true</code>, tracking of reputation metrics is enabled for the configuration
+     *             set. If <code>false</code>, tracking of reputation metrics is disabled for the
+     *             configuration set.</p>
+     * @public
+     */
+    ReputationMetricsEnabled?: boolean | undefined;
+}
+/**
+ * <p>An HTTP 200 response if the request succeeds, or an error message if the request
+ *             fails.</p>
+ * @public
+ */
+export interface PutConfigurationSetReputationOptionsResponse {
+}
+/**
+ * <p>A request to enable or disable the ability of Amazon SES to send emails that use a specific
+ *             configuration set.</p>
+ * @public
+ */
+export interface PutConfigurationSetSendingOptionsRequest {
+    /**
+     * <p>The name of the configuration set to enable or disable email sending for.</p>
+     * @public
+     */
+    ConfigurationSetName: string | undefined;
+    /**
+     * <p>If <code>true</code>, email sending is enabled for the configuration set. If
+     *                 <code>false</code>, email sending is disabled for the configuration set.</p>
+     * @public
+     */
+    SendingEnabled?: boolean | undefined;
+}
+/**
+ * <p>An HTTP 200 response if the request succeeds, or an error message if the request
+ *             fails.</p>
+ * @public
+ */
+export interface PutConfigurationSetSendingOptionsResponse {
+}
 /**
  * <p>A request to change the account suppression list preferences for a specific
  *             configuration set.</p>
@@ -538,6 +1053,17 @@ export interface SendBulkEmailRequest {
      * @public
      */
     EndpointId?: string | undefined;
+    /**
+     * <p>The name of the tenant through which this bulk email will be sent.</p>
+     *          <note>
+     *             <p>
+     *                 The email sending operation will only succeed if all referenced resources
+     *                 (identities, configuration sets, and templates) are associated with this tenant.
+     *             </p>
+     *          </note>
+     * @public
+     */
+    TenantName?: string | undefined;
 }
 /**
  * <p>The following data is returned in JSON format by the service.</p>
@@ -673,6 +1199,16 @@ export interface SendEmailRequest {
      * @public
      */
     EndpointId?: string | undefined;
+    /**
+     * <p>The name of the tenant through which this email will be sent.</p>
+     *          <note>
+     *             <p>The email sending operation will only succeed if all referenced resources
+     *                 (identities, configuration sets, and templates) are associated with this tenant.
+     *             </p>
+     *          </note>
+     * @public
+     */
+    TenantName?: string | undefined;
     /**
      * <p>An object used to specify a list or topic to which an email belongs, which will be
      *             used when a contact chooses to unsubscribe.</p>
@@ -980,6 +1516,81 @@ export interface UpdateEmailTemplateRequest {
  */
 export interface UpdateEmailTemplateResponse {
 }
+/**
+ * <p>Represents a request to update the customer-managed sending status for a reputation entity.</p>
+ * @public
+ */
+export interface UpdateReputationEntityCustomerManagedStatusRequest {
+    /**
+     * <p>The type of reputation entity. Currently, only <code>RESOURCE</code> type entities are supported.</p>
+     * @public
+     */
+    ReputationEntityType: ReputationEntityType | undefined;
+    /**
+     * <p>The unique identifier for the reputation entity. For resource-type entities,
+     *             this is the Amazon Resource Name (ARN) of the resource.</p>
+     * @public
+     */
+    ReputationEntityReference: string | undefined;
+    /**
+     * <p>The new customer-managed sending status for the reputation entity. This can be one of the following:</p>
+     *          <ul>
+     *             <li>
+     *                <p>
+     *                   <code>ENABLED</code> – Allow sending for this entity.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>DISABLED</code> – Prevent sending for this entity.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>REINSTATED</code> – Allow sending even if there are active reputation findings.</p>
+     *             </li>
+     *          </ul>
+     * @public
+     */
+    SendingStatus: SendingStatus | undefined;
+}
+/**
+ * <p>If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.</p>
+ * @public
+ */
+export interface UpdateReputationEntityCustomerManagedStatusResponse {
+}
+/**
+ * <p>Represents a request to update the reputation management policy for a reputation entity.</p>
+ * @public
+ */
+export interface UpdateReputationEntityPolicyRequest {
+    /**
+     * <p>The type of reputation entity. Currently, only <code>RESOURCE</code> type entities are supported.</p>
+     * @public
+     */
+    ReputationEntityType: ReputationEntityType | undefined;
+    /**
+     * <p>The unique identifier for the reputation entity. For resource-type entities,
+     *             this is the Amazon Resource Name (ARN) of the resource.</p>
+     * @public
+     */
+    ReputationEntityReference: string | undefined;
+    /**
+     * <p>The Amazon Resource Name (ARN) of the reputation management policy to apply
+     *             to this entity. This is an Amazon Web Services Amazon SES-managed policy.</p>
+     * @public
+     */
+    ReputationEntityPolicy: string | undefined;
+}
+/**
+ * <p>If the action is successful, the service sends back an HTTP 200 response with an empty HTTP body.</p>
+ * @public
+ */
+export interface UpdateReputationEntityPolicyResponse {
+}
+/**
+ * @internal
+ */
+export declare const PutAccountDetailsRequestFilterSensitiveLog: (obj: PutAccountDetailsRequest) => any;
 /**
  * @internal
  */

package/dist-types/pagination/ListReputationEntitiesPaginator.d.ts

@@ -0,0 +1,7 @@
+import { Paginator } from "@smithy/types";
+import { ListReputationEntitiesCommandInput, ListReputationEntitiesCommandOutput } from "../commands/ListReputationEntitiesCommand";
+import { SESv2PaginationConfiguration } from "./Interfaces";
+/**
+ * @public
+ */
+export declare const paginateListReputationEntities: (config: SESv2PaginationConfiguration, input: ListReputationEntitiesCommandInput, ...rest: any[]) => Paginator<ListReputationEntitiesCommandOutput>;

package/dist-types/pagination/ListResourceTenantsPaginator.d.ts

@@ -0,0 +1,7 @@
+import { Paginator } from "@smithy/types";
+import { ListResourceTenantsCommandInput, ListResourceTenantsCommandOutput } from "../commands/ListResourceTenantsCommand";
+import { SESv2PaginationConfiguration } from "./Interfaces";
+/**
+ * @public
+ */
+export declare const paginateListResourceTenants: (config: SESv2PaginationConfiguration, input: ListResourceTenantsCommandInput, ...rest: any[]) => Paginator<ListResourceTenantsCommandOutput>;

package/dist-types/pagination/ListTenantResourcesPaginator.d.ts

@@ -0,0 +1,7 @@
+import { Paginator } from "@smithy/types";
+import { ListTenantResourcesCommandInput, ListTenantResourcesCommandOutput } from "../commands/ListTenantResourcesCommand";
+import { SESv2PaginationConfiguration } from "./Interfaces";
+/**
+ * @public
+ */
+export declare const paginateListTenantResources: (config: SESv2PaginationConfiguration, input: ListTenantResourcesCommandInput, ...rest: any[]) => Paginator<ListTenantResourcesCommandOutput>;

package/dist-types/pagination/ListTenantsPaginator.d.ts

@@ -0,0 +1,7 @@
+import { Paginator } from "@smithy/types";
+import { ListTenantsCommandInput, ListTenantsCommandOutput } from "../commands/ListTenantsCommand";
+import { SESv2PaginationConfiguration } from "./Interfaces";
+/**
+ * @public
+ */
+export declare const paginateListTenants: (config: SESv2PaginationConfiguration, input: ListTenantsCommandInput, ...rest: any[]) => Paginator<ListTenantsCommandOutput>;

package/dist-types/pagination/index.d.ts

@@ -13,4 +13,8 @@ export * from "./ListExportJobsPaginator";
 export * from "./ListImportJobsPaginator";
 export * from "./ListMultiRegionEndpointsPaginator";
 export * from "./ListRecommendationsPaginator";
+export * from "./ListReputationEntitiesPaginator";
+export * from "./ListResourceTenantsPaginator";
 export * from "./ListSuppressedDestinationsPaginator";
+export * from "./ListTenantResourcesPaginator";
+export * from "./ListTenantsPaginator";