@aws-sdk/client-s3 3.918.0 → 3.919.0

package/dist-types/commands/DeleteObjectCommand.d.ts

@@ -141,6 +141,12 @@ declare const DeleteObjectCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
+ *          <note>
+ *             <p>The <code>If-Match</code> header is supported for both general purpose and directory buckets. <code>IfMatchLastModifiedTime</code> and <code>IfMatchSize</code> is only supported for directory buckets. </p>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DeleteObjectTaggingCommand.d.ts

@@ -50,6 +50,9 @@ declare const DeleteObjectTaggingCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DeleteObjectsCommand.d.ts

@@ -157,6 +157,9 @@ declare const DeleteObjectsCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DeletePublicAccessBlockCommand.d.ts

@@ -58,6 +58,9 @@ declare const DeletePublicAccessBlockCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketAccelerateConfigurationCommand.d.ts

@@ -53,6 +53,9 @@ declare const GetBucketAccelerateConfigurationCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketAclCommand.d.ts

@@ -28,7 +28,7 @@ declare const GetBucketAclCommand_base: {
 };
 /**
  * <important>
- *             <p>End of support notice: Beginning October 1, 2025, Amazon S3 will stop returning <code>DisplayName</code>. Update your applications to use canonical IDs (unique identifier for
+ *             <p>End of support notice: Beginning November 21, 2025, Amazon S3 will stop returning <code>DisplayName</code>. Update your applications to use canonical IDs (unique identifier for
  *  Amazon Web Services accounts), Amazon Web Services account ID (12 digit identifier) or IAM ARNs (full resource naming) as a direct replacement of <code>DisplayName</code>.
  * </p>
  *             <p>This change affects the following Amazon Web Services Regions: US East (N. Virginia) Region, US West (N. California) Region, US West (Oregon) Region, Asia Pacific (Singapore) Region, Asia Pacific (Sydney) Region,
@@ -53,6 +53,9 @@ declare const GetBucketAclCommand_base: {
  *         being the account that created the bucket. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/about-object-ownership.html"> Controlling object ownership and
  *           disabling ACLs</a> in the <i>Amazon S3 User Guide</i>.</p>
  *          </note>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  *          <p>The following operations are related to <code>GetBucketAcl</code>:</p>
  *          <ul>
  *             <li>

package/dist-types/commands/GetBucketAnalyticsConfigurationCommand.d.ts

@@ -56,6 +56,9 @@ declare const GetBucketAnalyticsConfigurationCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketCorsCommand.d.ts

@@ -53,6 +53,9 @@ declare const GetBucketCorsCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketEncryptionCommand.d.ts

@@ -86,6 +86,9 @@ declare const GetBucketEncryptionCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketIntelligentTieringConfigurationCommand.d.ts

@@ -52,6 +52,9 @@ declare const GetBucketIntelligentTieringConfigurationCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketInventoryConfigurationCommand.d.ts

@@ -55,6 +55,9 @@ declare const GetBucketInventoryConfigurationCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketLifecycleConfigurationCommand.d.ts

@@ -120,6 +120,9 @@ declare const GetBucketLifecycleConfigurationCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketLocationCommand.d.ts

@@ -27,20 +27,31 @@ declare const GetBucketLocationCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <note>
- *             <p>This operation is not supported for directory buckets.</p>
- *          </note>
+ * <important>
+ *             <p>Using the <code>GetBucketLocation</code> operation is no longer a best practice. To return the
+ *         Region that a bucket resides in, we recommend that you use the
+ *         <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_HeadBucket.html">HeadBucket</a>
+ *         operation instead. For backward compatibility, Amazon S3 continues to support the
+ *         <code>GetBucketLocation</code> operation.</p>
+ *          </important>
  *          <p>Returns the Region the bucket resides in. You set the bucket's Region using the
  *         <code>LocationConstraint</code> request parameter in a <code>CreateBucket</code> request. For more
  *       information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_CreateBucket.html">CreateBucket</a>.</p>
+ *          <note>
+ *             <p>In a bucket's home Region, calls to the <code>GetBucketLocation</code> operation are governed
+ *         by the bucket's policy. In other Regions, the bucket policy doesn't apply, which means that
+ *         cross-account access won't be authorized. However, calls to the <code>HeadBucket</code> operation
+ *         always return the bucket’s location through an HTTP response header, whether access to the bucket
+ *         is authorized or not. Therefore, we recommend using the <code>HeadBucket</code> operation for
+ *         bucket Region discovery and to avoid using the <code>GetBucketLocation</code> operation.</p>
+ *          </note>
  *          <p>When you use this API operation with an access point, provide the alias of the access point in place of the bucket name.</p>
  *          <p>When you use this API operation with an Object Lambda access point, provide the alias of the Object Lambda access point in place of the bucket name.
  * If the Object Lambda access point alias in a request is not valid, the error code <code>InvalidAccessPointAliasError</code> is returned.
  * For more information about <code>InvalidAccessPointAliasError</code>, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/ErrorResponses.html#ErrorCodeList">List of
  *             Error Codes</a>.</p>
  *          <note>
- *             <p>We recommend that you use <a href="https://docs.aws.amazon.com/AmazonS3/latest/API/API_HeadBucket.html">HeadBucket</a> to return the Region that a bucket
- *         resides in. For backward compatibility, Amazon S3 continues to support GetBucketLocation.</p>
+ *             <p>This operation is not supported for directory buckets.</p>
  *          </note>
  *          <p>The following operations are related to <code>GetBucketLocation</code>:</p>
  *          <ul>
@@ -55,6 +66,9 @@ declare const GetBucketLocationCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketLoggingCommand.d.ts

@@ -28,7 +28,7 @@ declare const GetBucketLoggingCommand_base: {
 };
 /**
  * <important>
- *             <p>End of support notice: Beginning October 1, 2025, Amazon S3 will stop returning <code>DisplayName</code>. Update your applications to use canonical IDs (unique identifier for
+ *             <p>End of support notice: Beginning November 21, 2025, Amazon S3 will stop returning <code>DisplayName</code>. Update your applications to use canonical IDs (unique identifier for
  *  Amazon Web Services accounts), Amazon Web Services account ID (12 digit identifier) or IAM ARNs (full resource naming) as a direct replacement of <code>DisplayName</code>.
  * </p>
  *             <p>This change affects the following Amazon Web Services Regions: US East (N. Virginia) Region, US West (N. California) Region, US West (Oregon) Region, Asia Pacific (Singapore) Region, Asia Pacific (Sydney) Region,
@@ -52,6 +52,9 @@ declare const GetBucketLoggingCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketMetadataConfigurationCommand.d.ts

@@ -70,6 +70,9 @@ declare const GetBucketMetadataConfigurationCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketMetadataTableConfigurationCommand.d.ts

@@ -70,6 +70,9 @@ declare const GetBucketMetadataTableConfigurationCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketMetricsConfigurationCommand.d.ts

@@ -62,6 +62,9 @@ declare const GetBucketMetricsConfigurationCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketNotificationConfigurationCommand.d.ts

@@ -52,6 +52,9 @@ declare const GetBucketNotificationConfigurationCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketOwnershipControlsCommand.d.ts

@@ -62,6 +62,9 @@ declare const GetBucketOwnershipControlsCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketPolicyCommand.d.ts

@@ -94,6 +94,9 @@ declare const GetBucketPolicyCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketPolicyStatusCommand.d.ts

@@ -58,6 +58,9 @@ declare const GetBucketPolicyStatusCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketReplicationCommand.d.ts

@@ -59,6 +59,9 @@ declare const GetBucketReplicationCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketRequestPaymentCommand.d.ts

@@ -40,6 +40,9 @@ declare const GetBucketRequestPaymentCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketTaggingCommand.d.ts

@@ -59,6 +59,9 @@ declare const GetBucketTaggingCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketVersioningCommand.d.ts

@@ -53,6 +53,9 @@ declare const GetBucketVersioningCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetBucketWebsiteCommand.d.ts

@@ -49,6 +49,9 @@ declare const GetBucketWebsiteCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetObjectAclCommand.d.ts

@@ -27,7 +27,14 @@ declare const GetObjectAclCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <note>
+ * <important>
+ *             <p>End of support notice: Beginning November 21, 2025, Amazon S3 will stop returning <code>DisplayName</code>. Update your applications to use canonical IDs (unique identifier for
+ *  Amazon Web Services accounts), Amazon Web Services account ID (12 digit identifier) or IAM ARNs (full resource naming) as a direct replacement of <code>DisplayName</code>.
+ * </p>
+ *             <p>This change affects the following Amazon Web Services Regions: US East (N. Virginia) Region, US West (N. California) Region, US West (Oregon) Region, Asia Pacific (Singapore) Region, Asia Pacific (Sydney) Region,
+ *  Asia Pacific (Tokyo) Region, Europe (Ireland) Region, and South America (São Paulo) Region.</p>
+ *          </important>
+ *          <note>
  *             <p>This operation is not supported for directory buckets.</p>
  *          </note>
  *          <p>Returns the access control list (ACL) of an object. To use this operation, you must have
@@ -67,6 +74,9 @@ declare const GetObjectAclCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetObjectAttributesCommand.d.ts

@@ -232,6 +232,9 @@ declare const GetObjectAttributesCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetObjectCommand.d.ts

@@ -190,6 +190,9 @@ declare const GetObjectCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetObjectLegalHoldCommand.d.ts

@@ -40,6 +40,9 @@ declare const GetObjectLegalHoldCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetObjectLockConfigurationCommand.d.ts

@@ -41,6 +41,9 @@ declare const GetObjectLockConfigurationCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetObjectRetentionCommand.d.ts

@@ -40,6 +40,9 @@ declare const GetObjectRetentionCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetObjectTaggingCommand.d.ts

@@ -57,6 +57,9 @@ declare const GetObjectTaggingCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetObjectTorrentCommand.d.ts

@@ -47,6 +47,9 @@ declare const GetObjectTorrentCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetPublicAccessBlockCommand.d.ts

@@ -65,6 +65,9 @@ declare const GetPublicAccessBlockCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/HeadBucketCommand.d.ts

@@ -28,13 +28,16 @@ declare const HeadBucketCommand_base: {
 };
 /**
  * <p>You can use this operation to determine if a bucket exists and if you have permission to access it.
- *       The action returns a <code>200 OK</code> if the bucket exists and you have permission to access
- *       it.</p>
+ *       The action returns a <code>200 OK</code> HTTP status code if the bucket exists and you have
+ *       permission to access it. You can make a <code>HeadBucket</code> call on any bucket name to any
+ *       Region in the partition, and regardless of the permissions on the bucket, you will receive a
+ *       response header with the correct bucket location so that you can then make a proper, signed request
+ *       to the appropriate Regional endpoint.</p>
  *          <note>
- *             <p>If the bucket does not exist or you do not have permission to access it, the <code>HEAD</code>
- *         request returns a generic <code>400 Bad Request</code>, <code>403 Forbidden</code> or <code>404 Not
- *           Found</code> code. A message body is not included, so you cannot determine the exception beyond
- *         these HTTP response codes.</p>
+ *             <p>If the bucket doesn't exist or you don't have permission to access it, the <code>HEAD</code>
+ *         request returns a generic <code>400 Bad Request</code>, <code>403 Forbidden</code>, or
+ *         <code>404 Not Found</code> HTTP status code. A message body isn't included, so you can't determine
+ *         the exception beyond these HTTP response codes.</p>
  *          </note>
  *          <dl>
  *             <dt>Authentication and authorization</dt>
@@ -94,6 +97,9 @@ declare const HeadBucketCommand_base: {
  *                </note>
  *             </dd>
  *          </dl>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/HeadObjectCommand.d.ts

@@ -178,6 +178,9 @@ declare const HeadObjectCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/ListBucketAnalyticsConfigurationsCommand.d.ts

@@ -63,6 +63,9 @@ declare const ListBucketAnalyticsConfigurationsCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/ListBucketIntelligentTieringConfigurationsCommand.d.ts

@@ -52,6 +52,9 @@ declare const ListBucketIntelligentTieringConfigurationsCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/ListBucketInventoryConfigurationsCommand.d.ts

@@ -30,7 +30,7 @@ declare const ListBucketInventoryConfigurationsCommand_base: {
  * <note>
  *             <p>This operation is not supported for directory buckets.</p>
  *          </note>
- *          <p>Returns a list of S3 Inventory configurations for the bucket. You can have up to 1,000 analytics
+ *          <p>Returns a list of S3 Inventory configurations for the bucket. You can have up to 1,000 inventory
  *       configurations per bucket.</p>
  *          <p>This action supports list pagination and does not return more than 100 configurations at a time.
  *       Always check the <code>IsTruncated</code> element in the response. If there are no more configurations
@@ -62,6 +62,9 @@ declare const ListBucketInventoryConfigurationsCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/ListBucketMetricsConfigurationsCommand.d.ts

@@ -63,6 +63,9 @@ declare const ListBucketMetricsConfigurationsCommand_base: {
  *                </p>
  *             </li>
  *          </ul>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/ListBucketsCommand.d.ts

@@ -28,7 +28,7 @@ declare const ListBucketsCommand_base: {
 };
 /**
  * <important>
- *             <p>End of support notice: Beginning October 1, 2025, Amazon S3 will stop returning <code>DisplayName</code>. Update your applications to use canonical IDs (unique identifier for
+ *             <p>End of support notice: Beginning November 21, 2025, Amazon S3 will stop returning <code>DisplayName</code>. Update your applications to use canonical IDs (unique identifier for
  *  Amazon Web Services accounts), Amazon Web Services account ID (12 digit identifier) or IAM ARNs (full resource naming) as a direct replacement of <code>DisplayName</code>.
  * </p>
  *             <p>This change affects the following Amazon Web Services Regions: US East (N. Virginia) Region, US West (N. California) Region, US West (Oregon) Region, Asia Pacific (Singapore) Region, Asia Pacific (Sydney) Region,
@@ -49,6 +49,9 @@ declare const ListBucketsCommand_base: {
  *           <code>ListBuckets</code> requests will be rejected for Amazon Web Services accounts with a general purpose bucket
  *         quota greater than 10,000. </p>
  *          </important>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/ListDirectoryBucketsCommand.d.ts

@@ -56,6 +56,9 @@ declare const ListDirectoryBucketsCommand_base: {
  *             <p> The <code>BucketRegion</code> response element is not part of the
  *           <code>ListDirectoryBuckets</code> Response Syntax.</p>
  *          </note>
+ *          <important>
+ *             <p>You must URL encode any signed header values that contain spaces. For example, if your header value is <code>my  file.txt</code>, containing two spaces after <code>my</code>, you must URL encode this value to <code>my%20%20file.txt</code>.</p>
+ *          </important>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript