@aws-sdk/client-route53resolver 3.473.0 → 3.476.0

package/dist-cjs/models/models_0.js

@@ -1,6 +1,6 @@
 "use strict";
 Object.defineProperty(exports, "__esModule", { value: true });
-exports.Validation = exports.SortOrder = exports.IpAddressStatus = exports.InvalidTagException = exports.InvalidPolicyDocument = exports.InvalidNextTokenException = exports.UnknownResourceException = exports.ResolverDNSSECValidationStatus = exports.ResolverAutodefinedReverseStatus = exports.FirewallDomainUpdateOperation = exports.FirewallDomainImportOperation = exports.FirewallFailOpenStatus = exports.ResourceInUseException = exports.ResolverRuleStatus = exports.RuleTypeOption = exports.ResolverQueryLogConfigStatus = exports.ServiceQuotaExceededException = exports.OutpostResolverStatus = exports.FirewallRuleGroupStatus = exports.ShareStatus = exports.FirewallDomainListStatus = exports.BlockResponse = exports.BlockOverrideDnsType = exports.AutodefinedReverseFlag = exports.ResourceUnavailableException = exports.ResolverRuleAssociationStatus = exports.ResolverQueryLogConfigAssociationStatus = exports.ResolverQueryLogConfigAssociationError = exports.ResourceExistsException = exports.InvalidRequestException = exports.InvalidParameterException = exports.ResolverEndpointStatus = exports.ResolverEndpointType = exports.ResolverEndpointDirection = exports.ValidationException = exports.ThrottlingException = exports.ResourceNotFoundException = exports.LimitExceededException = exports.InternalServiceErrorException = exports.ConflictException = exports.FirewallRuleGroupAssociationStatus = exports.MutationProtectionStatus = exports.Action = exports.AccessDeniedException = void 0;
+exports.Validation = exports.SortOrder = exports.IpAddressStatus = exports.InvalidTagException = exports.InvalidPolicyDocument = exports.InvalidNextTokenException = exports.UnknownResourceException = exports.ResolverDNSSECValidationStatus = exports.ResolverAutodefinedReverseStatus = exports.FirewallDomainUpdateOperation = exports.FirewallDomainImportOperation = exports.FirewallFailOpenStatus = exports.ResourceInUseException = exports.ResolverRuleStatus = exports.RuleTypeOption = exports.ResolverQueryLogConfigStatus = exports.ServiceQuotaExceededException = exports.OutpostResolverStatus = exports.FirewallRuleGroupStatus = exports.ShareStatus = exports.FirewallDomainListStatus = exports.BlockResponse = exports.BlockOverrideDnsType = exports.AutodefinedReverseFlag = exports.ResourceUnavailableException = exports.ResolverRuleAssociationStatus = exports.ResolverQueryLogConfigAssociationStatus = exports.ResolverQueryLogConfigAssociationError = exports.ResourceExistsException = exports.InvalidRequestException = exports.InvalidParameterException = exports.ResolverEndpointStatus = exports.ResolverEndpointType = exports.Protocol = exports.ResolverEndpointDirection = exports.ValidationException = exports.ThrottlingException = exports.ResourceNotFoundException = exports.LimitExceededException = exports.InternalServiceErrorException = exports.ConflictException = exports.FirewallRuleGroupAssociationStatus = exports.MutationProtectionStatus = exports.Action = exports.AccessDeniedException = void 0;
 const Route53ResolverServiceException_1 = require("./Route53ResolverServiceException");
 class AccessDeniedException extends Route53ResolverServiceException_1.Route53ResolverServiceException {
     constructor(opts) {
@@ -120,6 +120,11 @@ exports.ResolverEndpointDirection = {
     Inbound: "INBOUND",
     Outbound: "OUTBOUND",
 };
+exports.Protocol = {
+    DO53: "Do53",
+    DOH: "DoH",
+    DOHFIPS: "DoH-FIPS",
+};
 exports.ResolverEndpointType = {
     DUALSTACK: "DUALSTACK",
     IPV4: "IPV4",

package/dist-cjs/protocols/Aws_json1_1.js

@@ -901,6 +901,9 @@ const de_CreateResolverEndpointCommandError = async (output, context) => {
     };
     const errorCode = loadRestJsonErrorCode(output, parsedOutput.body);
     switch (errorCode) {
+        case "AccessDeniedException":
+        case "com.amazonaws.route53resolver#AccessDeniedException":
+            throw await de_AccessDeniedExceptionRes(parsedOutput, context);
         case "InternalServiceErrorException":
         case "com.amazonaws.route53resolver#InternalServiceErrorException":
             throw await de_InternalServiceErrorExceptionRes(parsedOutput, context);
@@ -1006,6 +1009,9 @@ const de_CreateResolverRuleCommandError = async (output, context) => {
     };
     const errorCode = loadRestJsonErrorCode(output, parsedOutput.body);
     switch (errorCode) {
+        case "AccessDeniedException":
+        case "com.amazonaws.route53resolver#AccessDeniedException":
+            throw await de_AccessDeniedExceptionRes(parsedOutput, context);
         case "InternalServiceErrorException":
         case "com.amazonaws.route53resolver#InternalServiceErrorException":
             throw await de_InternalServiceErrorExceptionRes(parsedOutput, context);
@@ -3592,6 +3598,9 @@ const de_UpdateResolverEndpointCommandError = async (output, context) => {
     };
     const errorCode = loadRestJsonErrorCode(output, parsedOutput.body);
     switch (errorCode) {
+        case "AccessDeniedException":
+        case "com.amazonaws.route53resolver#AccessDeniedException":
+            throw await de_AccessDeniedExceptionRes(parsedOutput, context);
         case "InternalServiceErrorException":
         case "com.amazonaws.route53resolver#InternalServiceErrorException":
             throw await de_InternalServiceErrorExceptionRes(parsedOutput, context);
@@ -3637,6 +3646,9 @@ const de_UpdateResolverRuleCommandError = async (output, context) => {
     };
     const errorCode = loadRestJsonErrorCode(output, parsedOutput.body);
     switch (errorCode) {
+        case "AccessDeniedException":
+        case "com.amazonaws.route53resolver#AccessDeniedException":
+            throw await de_AccessDeniedExceptionRes(parsedOutput, context);
         case "InternalServiceErrorException":
         case "com.amazonaws.route53resolver#InternalServiceErrorException":
             throw await de_InternalServiceErrorExceptionRes(parsedOutput, context);

package/dist-es/models/models_0.js

@@ -110,6 +110,11 @@ export const ResolverEndpointDirection = {
     Inbound: "INBOUND",
     Outbound: "OUTBOUND",
 };
+export const Protocol = {
+    DO53: "Do53",
+    DOH: "DoH",
+    DOHFIPS: "DoH-FIPS",
+};
 export const ResolverEndpointType = {
     DUALSTACK: "DUALSTACK",
     IPV4: "IPV4",

package/dist-es/protocols/Aws_json1_1.js

@@ -819,6 +819,9 @@ const de_CreateResolverEndpointCommandError = async (output, context) => {
     };
     const errorCode = loadRestJsonErrorCode(output, parsedOutput.body);
     switch (errorCode) {
+        case "AccessDeniedException":
+        case "com.amazonaws.route53resolver#AccessDeniedException":
+            throw await de_AccessDeniedExceptionRes(parsedOutput, context);
         case "InternalServiceErrorException":
         case "com.amazonaws.route53resolver#InternalServiceErrorException":
             throw await de_InternalServiceErrorExceptionRes(parsedOutput, context);
@@ -922,6 +925,9 @@ const de_CreateResolverRuleCommandError = async (output, context) => {
     };
     const errorCode = loadRestJsonErrorCode(output, parsedOutput.body);
     switch (errorCode) {
+        case "AccessDeniedException":
+        case "com.amazonaws.route53resolver#AccessDeniedException":
+            throw await de_AccessDeniedExceptionRes(parsedOutput, context);
         case "InternalServiceErrorException":
         case "com.amazonaws.route53resolver#InternalServiceErrorException":
             throw await de_InternalServiceErrorExceptionRes(parsedOutput, context);
@@ -3452,6 +3458,9 @@ const de_UpdateResolverEndpointCommandError = async (output, context) => {
     };
     const errorCode = loadRestJsonErrorCode(output, parsedOutput.body);
     switch (errorCode) {
+        case "AccessDeniedException":
+        case "com.amazonaws.route53resolver#AccessDeniedException":
+            throw await de_AccessDeniedExceptionRes(parsedOutput, context);
         case "InternalServiceErrorException":
         case "com.amazonaws.route53resolver#InternalServiceErrorException":
             throw await de_InternalServiceErrorExceptionRes(parsedOutput, context);
@@ -3496,6 +3505,9 @@ const de_UpdateResolverRuleCommandError = async (output, context) => {
     };
     const errorCode = loadRestJsonErrorCode(output, parsedOutput.body);
     switch (errorCode) {
+        case "AccessDeniedException":
+        case "com.amazonaws.route53resolver#AccessDeniedException":
+            throw await de_AccessDeniedExceptionRes(parsedOutput, context);
         case "InternalServiceErrorException":
         case "com.amazonaws.route53resolver#InternalServiceErrorException":
             throw await de_InternalServiceErrorExceptionRes(parsedOutput, context);

package/dist-types/commands/AssociateFirewallRuleGroupCommand.d.ts

@@ -93,7 +93,7 @@ export interface AssociateFirewallRuleGroupCommandOutput extends AssociateFirewa
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/AssociateResolverEndpointIpAddressCommand.d.ts

@@ -61,9 +61,12 @@ export interface AssociateResolverEndpointIpAddressCommandOutput extends Associa
  * //     StatusMessage: "STRING_VALUE",
  * //     CreationTime: "STRING_VALUE",
  * //     ModificationTime: "STRING_VALUE",
- * //     ResolverEndpointType: "IPV6" || "IPV4" || "DUALSTACK",
  * //     OutpostArn: "STRING_VALUE",
  * //     PreferredInstanceType: "STRING_VALUE",
+ * //     ResolverEndpointType: "IPV6" || "IPV4" || "DUALSTACK",
+ * //     Protocols: [ // ProtocolList
+ * //       "DoH" || "Do53" || "DoH-FIPS",
+ * //     ],
  * //   },
  * // };
  *

package/dist-types/commands/CreateFirewallDomainListCommand.d.ts

@@ -78,7 +78,7 @@ export interface CreateFirewallDomainListCommandOutput extends CreateFirewallDom
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/CreateFirewallRuleCommand.d.ts

@@ -85,7 +85,7 @@ export interface CreateFirewallRuleCommandOutput extends CreateFirewallRuleRespo
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/CreateFirewallRuleGroupCommand.d.ts

@@ -80,7 +80,7 @@ export interface CreateFirewallRuleGroupCommandOutput extends CreateFirewallRule
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/CreateOutpostResolverCommand.d.ts

@@ -23,7 +23,7 @@ export interface CreateOutpostResolverCommandOutput extends CreateOutpostResolve
 }
 /**
  * @public
- * <p>Creates an Route 53 Resolver on an Outpost.</p>
+ * <p>Creates a Route 53 Resolver on an Outpost.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -85,7 +85,7 @@ export interface CreateOutpostResolverCommandOutput extends CreateOutpostResolve
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/CreateResolverEndpointCommand.d.ts

@@ -54,6 +54,8 @@ export interface CreateResolverEndpointCommandOutput extends CreateResolverEndpo
  *       Ipv6: "STRING_VALUE",
  *     },
  *   ],
+ *   OutpostArn: "STRING_VALUE",
+ *   PreferredInstanceType: "STRING_VALUE",
  *   Tags: [ // TagList
  *     { // Tag
  *       Key: "STRING_VALUE", // required
@@ -61,8 +63,9 @@ export interface CreateResolverEndpointCommandOutput extends CreateResolverEndpo
  *     },
  *   ],
  *   ResolverEndpointType: "IPV6" || "IPV4" || "DUALSTACK",
- *   OutpostArn: "STRING_VALUE",
- *   PreferredInstanceType: "STRING_VALUE",
+ *   Protocols: [ // ProtocolList
+ *     "DoH" || "Do53" || "DoH-FIPS",
+ *   ],
  * };
  * const command = new CreateResolverEndpointCommand(input);
  * const response = await client.send(command);
@@ -82,9 +85,12 @@ export interface CreateResolverEndpointCommandOutput extends CreateResolverEndpo
  * //     StatusMessage: "STRING_VALUE",
  * //     CreationTime: "STRING_VALUE",
  * //     ModificationTime: "STRING_VALUE",
- * //     ResolverEndpointType: "IPV6" || "IPV4" || "DUALSTACK",
  * //     OutpostArn: "STRING_VALUE",
  * //     PreferredInstanceType: "STRING_VALUE",
+ * //     ResolverEndpointType: "IPV6" || "IPV4" || "DUALSTACK",
+ * //     Protocols: [ // ProtocolList
+ * //       "DoH" || "Do53" || "DoH-FIPS",
+ * //     ],
  * //   },
  * // };
  *
@@ -96,6 +102,9 @@ export interface CreateResolverEndpointCommandOutput extends CreateResolverEndpo
  * @see {@link CreateResolverEndpointCommandOutput} for command's `response` shape.
  * @see {@link Route53ResolverClientResolvedConfig | config} for Route53ResolverClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>The current account doesn't have the IAM permissions required to perform the specified Resolver operation.</p>
+ *
  * @throws {@link InternalServiceErrorException} (client fault)
  *  <p>We encountered an unknown error. Try again in a few minutes.</p>
  *

package/dist-types/commands/CreateResolverRuleCommand.d.ts

@@ -35,12 +35,13 @@ export interface CreateResolverRuleCommandOutput extends CreateResolverRuleRespo
  *   CreatorRequestId: "STRING_VALUE", // required
  *   Name: "STRING_VALUE",
  *   RuleType: "FORWARD" || "SYSTEM" || "RECURSIVE", // required
- *   DomainName: "STRING_VALUE", // required
+ *   DomainName: "STRING_VALUE",
  *   TargetIps: [ // TargetList
  *     { // TargetAddress
  *       Ip: "STRING_VALUE",
  *       Port: Number("int"),
  *       Ipv6: "STRING_VALUE",
+ *       Protocol: "DoH" || "Do53" || "DoH-FIPS",
  *     },
  *   ],
  *   ResolverEndpointId: "STRING_VALUE",
@@ -68,6 +69,7 @@ export interface CreateResolverRuleCommandOutput extends CreateResolverRuleRespo
  * //         Ip: "STRING_VALUE",
  * //         Port: Number("int"),
  * //         Ipv6: "STRING_VALUE",
+ * //         Protocol: "DoH" || "Do53" || "DoH-FIPS",
  * //       },
  * //     ],
  * //     ResolverEndpointId: "STRING_VALUE",
@@ -86,6 +88,9 @@ export interface CreateResolverRuleCommandOutput extends CreateResolverRuleRespo
  * @see {@link CreateResolverRuleCommandOutput} for command's `response` shape.
  * @see {@link Route53ResolverClientResolvedConfig | config} for Route53ResolverClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>The current account doesn't have the IAM permissions required to perform the specified Resolver operation.</p>
+ *
  * @throws {@link InternalServiceErrorException} (client fault)
  *  <p>We encountered an unknown error. Try again in a few minutes.</p>
  *

package/dist-types/commands/DeleteFirewallRuleGroupCommand.d.ts

@@ -77,7 +77,7 @@ export interface DeleteFirewallRuleGroupCommandOutput extends DeleteFirewallRule
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/DeleteOutpostResolverCommand.d.ts

@@ -77,7 +77,7 @@ export interface DeleteOutpostResolverCommandOutput extends DeleteOutpostResolve
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/DeleteResolverEndpointCommand.d.ts

@@ -63,9 +63,12 @@ export interface DeleteResolverEndpointCommandOutput extends DeleteResolverEndpo
  * //     StatusMessage: "STRING_VALUE",
  * //     CreationTime: "STRING_VALUE",
  * //     ModificationTime: "STRING_VALUE",
- * //     ResolverEndpointType: "IPV6" || "IPV4" || "DUALSTACK",
  * //     OutpostArn: "STRING_VALUE",
  * //     PreferredInstanceType: "STRING_VALUE",
+ * //     ResolverEndpointType: "IPV6" || "IPV4" || "DUALSTACK",
+ * //     Protocols: [ // ProtocolList
+ * //       "DoH" || "Do53" || "DoH-FIPS",
+ * //     ],
  * //   },
  * // };
  *

package/dist-types/commands/DeleteResolverRuleCommand.d.ts

@@ -52,6 +52,7 @@ export interface DeleteResolverRuleCommandOutput extends DeleteResolverRuleRespo
  * //         Ip: "STRING_VALUE",
  * //         Port: Number("int"),
  * //         Ipv6: "STRING_VALUE",
+ * //         Protocol: "DoH" || "Do53" || "DoH-FIPS",
  * //       },
  * //     ],
  * //     ResolverEndpointId: "STRING_VALUE",

package/dist-types/commands/DisassociateFirewallRuleGroupCommand.d.ts

@@ -79,7 +79,7 @@ export interface DisassociateFirewallRuleGroupCommandOutput extends Disassociate
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/DisassociateResolverEndpointIpAddressCommand.d.ts

@@ -61,9 +61,12 @@ export interface DisassociateResolverEndpointIpAddressCommandOutput extends Disa
  * //     StatusMessage: "STRING_VALUE",
  * //     CreationTime: "STRING_VALUE",
  * //     ModificationTime: "STRING_VALUE",
- * //     ResolverEndpointType: "IPV6" || "IPV4" || "DUALSTACK",
  * //     OutpostArn: "STRING_VALUE",
  * //     PreferredInstanceType: "STRING_VALUE",
+ * //     ResolverEndpointType: "IPV6" || "IPV4" || "DUALSTACK",
+ * //     Protocols: [ // ProtocolList
+ * //       "DoH" || "Do53" || "DoH-FIPS",
+ * //     ],
  * //   },
  * // };
  *

package/dist-types/commands/GetFirewallConfigCommand.d.ts

@@ -66,7 +66,7 @@ export interface GetFirewallConfigCommandOutput extends GetFirewallConfigRespons
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/GetFirewallRuleGroupPolicyCommand.d.ts

@@ -61,7 +61,7 @@ export interface GetFirewallRuleGroupPolicyCommandOutput extends GetFirewallRule
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/GetOutpostResolverCommand.d.ts

@@ -73,7 +73,7 @@ export interface GetOutpostResolverCommandOutput extends GetOutpostResolverRespo
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/GetResolverConfigCommand.d.ts

@@ -69,7 +69,7 @@ export interface GetResolverConfigCommandOutput extends GetResolverConfigRespons
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/GetResolverEndpointCommand.d.ts

@@ -52,9 +52,12 @@ export interface GetResolverEndpointCommandOutput extends GetResolverEndpointRes
  * //     StatusMessage: "STRING_VALUE",
  * //     CreationTime: "STRING_VALUE",
  * //     ModificationTime: "STRING_VALUE",
- * //     ResolverEndpointType: "IPV6" || "IPV4" || "DUALSTACK",
  * //     OutpostArn: "STRING_VALUE",
  * //     PreferredInstanceType: "STRING_VALUE",
+ * //     ResolverEndpointType: "IPV6" || "IPV4" || "DUALSTACK",
+ * //     Protocols: [ // ProtocolList
+ * //       "DoH" || "Do53" || "DoH-FIPS",
+ * //     ],
  * //   },
  * // };
  *

package/dist-types/commands/GetResolverRuleCommand.d.ts

@@ -51,6 +51,7 @@ export interface GetResolverRuleCommandOutput extends GetResolverRuleResponse, _
  * //         Ip: "STRING_VALUE",
  * //         Port: Number("int"),
  * //         Ipv6: "STRING_VALUE",
+ * //         Protocol: "DoH" || "Do53" || "DoH-FIPS",
  * //       },
  * //     ],
  * //     ResolverEndpointId: "STRING_VALUE",

package/dist-types/commands/ImportFirewallDomainsCommand.d.ts

@@ -88,7 +88,7 @@ export interface ImportFirewallDomainsCommandOutput extends ImportFirewallDomain
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/ListFirewallConfigsCommand.d.ts

@@ -67,7 +67,7 @@ export interface ListFirewallConfigsCommandOutput extends ListFirewallConfigsRes
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/ListFirewallDomainListsCommand.d.ts

@@ -68,7 +68,7 @@ export interface ListFirewallDomainListsCommandOutput extends ListFirewallDomain
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/ListFirewallDomainsCommand.d.ts

@@ -66,7 +66,7 @@ export interface ListFirewallDomainsCommandOutput extends ListFirewallDomainsRes
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/ListFirewallRuleGroupAssociationsCommand.d.ts

@@ -80,7 +80,7 @@ export interface ListFirewallRuleGroupAssociationsCommandOutput extends ListFire
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/ListFirewallRuleGroupsCommand.d.ts

@@ -69,7 +69,7 @@ export interface ListFirewallRuleGroupsCommandOutput extends ListFirewallRuleGro
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/ListFirewallRulesCommand.d.ts

@@ -81,7 +81,7 @@ export interface ListFirewallRulesCommandOutput extends ListFirewallRulesRespons
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/ListOutpostResolversCommand.d.ts

@@ -77,7 +77,7 @@ export interface ListOutpostResolversCommandOutput extends ListOutpostResolversR
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/ListResolverConfigsCommand.d.ts

@@ -76,7 +76,7 @@ export interface ListResolverConfigsCommandOutput extends ListResolverConfigsRes
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/ListResolverEndpointsCommand.d.ts

@@ -63,9 +63,12 @@ export interface ListResolverEndpointsCommandOutput extends ListResolverEndpoint
  * //       StatusMessage: "STRING_VALUE",
  * //       CreationTime: "STRING_VALUE",
  * //       ModificationTime: "STRING_VALUE",
- * //       ResolverEndpointType: "IPV6" || "IPV4" || "DUALSTACK",
  * //       OutpostArn: "STRING_VALUE",
  * //       PreferredInstanceType: "STRING_VALUE",
+ * //       ResolverEndpointType: "IPV6" || "IPV4" || "DUALSTACK",
+ * //       Protocols: [ // ProtocolList
+ * //         "DoH" || "Do53" || "DoH-FIPS",
+ * //       ],
  * //     },
  * //   ],
  * // };

package/dist-types/commands/ListResolverRulesCommand.d.ts

@@ -62,6 +62,7 @@ export interface ListResolverRulesCommandOutput extends ListResolverRulesRespons
  * //           Ip: "STRING_VALUE",
  * //           Port: Number("int"),
  * //           Ipv6: "STRING_VALUE",
+ * //           Protocol: "DoH" || "Do53" || "DoH-FIPS",
  * //         },
  * //       ],
  * //       ResolverEndpointId: "STRING_VALUE",

package/dist-types/commands/PutFirewallRuleGroupPolicyCommand.d.ts

@@ -63,7 +63,7 @@ export interface PutFirewallRuleGroupPolicyCommandOutput extends PutFirewallRule
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/UpdateFirewallConfigCommand.d.ts

@@ -67,7 +67,7 @@ export interface UpdateFirewallConfigCommandOutput extends UpdateFirewallConfigR
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/UpdateFirewallDomainsCommand.d.ts

@@ -75,7 +75,7 @@ export interface UpdateFirewallDomainsCommandOutput extends UpdateFirewallDomain
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/UpdateFirewallRuleCommand.d.ts

@@ -86,7 +86,7 @@ export interface UpdateFirewallRuleCommandOutput extends UpdateFirewallRuleRespo
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/UpdateFirewallRuleGroupAssociationCommand.d.ts

@@ -82,7 +82,7 @@ export interface UpdateFirewallRuleGroupAssociationCommandOutput extends UpdateF
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/UpdateOutpostResolverCommand.d.ts

@@ -83,7 +83,7 @@ export interface UpdateOutpostResolverCommandOutput extends UpdateOutpostResolve
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/UpdateResolverConfigCommand.d.ts

@@ -79,7 +79,7 @@ export interface UpdateResolverConfigCommandOutput extends UpdateResolverConfigR
  *  <p>The request was throttled. Try again in a few minutes.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ *  <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  *
  * @throws {@link Route53ResolverServiceException}

package/dist-types/commands/UpdateResolverEndpointCommand.d.ts

@@ -23,7 +23,7 @@ export interface UpdateResolverEndpointCommandOutput extends UpdateResolverEndpo
 }
 /**
  * @public
- * <p>Updates the name, or enpoint type for an inbound or an outbound Resolver endpoint.
+ * <p>Updates the name, or endpoint type for an inbound or an outbound Resolver endpoint.
  * 			You can only update between IPV4 and DUALSTACK, IPV6 endpoint type can't be updated to other type. </p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
@@ -41,6 +41,9 @@ export interface UpdateResolverEndpointCommandOutput extends UpdateResolverEndpo
  *       Ipv6: "STRING_VALUE", // required
  *     },
  *   ],
+ *   Protocols: [ // ProtocolList
+ *     "DoH" || "Do53" || "DoH-FIPS",
+ *   ],
  * };
  * const command = new UpdateResolverEndpointCommand(input);
  * const response = await client.send(command);
@@ -60,9 +63,12 @@ export interface UpdateResolverEndpointCommandOutput extends UpdateResolverEndpo
  * //     StatusMessage: "STRING_VALUE",
  * //     CreationTime: "STRING_VALUE",
  * //     ModificationTime: "STRING_VALUE",
- * //     ResolverEndpointType: "IPV6" || "IPV4" || "DUALSTACK",
  * //     OutpostArn: "STRING_VALUE",
  * //     PreferredInstanceType: "STRING_VALUE",
+ * //     ResolverEndpointType: "IPV6" || "IPV4" || "DUALSTACK",
+ * //     Protocols: [ // ProtocolList
+ * //       "DoH" || "Do53" || "DoH-FIPS",
+ * //     ],
  * //   },
  * // };
  *
@@ -74,6 +80,9 @@ export interface UpdateResolverEndpointCommandOutput extends UpdateResolverEndpo
  * @see {@link UpdateResolverEndpointCommandOutput} for command's `response` shape.
  * @see {@link Route53ResolverClientResolvedConfig | config} for Route53ResolverClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>The current account doesn't have the IAM permissions required to perform the specified Resolver operation.</p>
+ *
  * @throws {@link InternalServiceErrorException} (client fault)
  *  <p>We encountered an unknown error. Try again in a few minutes.</p>
  *

package/dist-types/commands/UpdateResolverRuleCommand.d.ts

@@ -40,6 +40,7 @@ export interface UpdateResolverRuleCommandOutput extends UpdateResolverRuleRespo
  *         Ip: "STRING_VALUE",
  *         Port: Number("int"),
  *         Ipv6: "STRING_VALUE",
+ *         Protocol: "DoH" || "Do53" || "DoH-FIPS",
  *       },
  *     ],
  *     ResolverEndpointId: "STRING_VALUE",
@@ -62,6 +63,7 @@ export interface UpdateResolverRuleCommandOutput extends UpdateResolverRuleRespo
  * //         Ip: "STRING_VALUE",
  * //         Port: Number("int"),
  * //         Ipv6: "STRING_VALUE",
+ * //         Protocol: "DoH" || "Do53" || "DoH-FIPS",
  * //       },
  * //     ],
  * //     ResolverEndpointId: "STRING_VALUE",
@@ -80,6 +82,9 @@ export interface UpdateResolverRuleCommandOutput extends UpdateResolverRuleRespo
  * @see {@link UpdateResolverRuleCommandOutput} for command's `response` shape.
  * @see {@link Route53ResolverClientResolvedConfig | config} for Route53ResolverClient's `config` shape.
  *
+ * @throws {@link AccessDeniedException} (client fault)
+ *  <p>The current account doesn't have the IAM permissions required to perform the specified Resolver operation.</p>
+ *
  * @throws {@link InternalServiceErrorException} (client fault)
  *  <p>We encountered an unknown error. Try again in a few minutes.</p>
  *

package/dist-types/models/models_0.d.ts

@@ -284,7 +284,7 @@ export declare class ThrottlingException extends __BaseException {
 }
 /**
  * @public
- * <p>You have provided an invalid command. Supported values are <code>ADD</code>,
+ * <p>You have provided an invalid command. If you ran the <code>UpdateFirewallDomains</code> request. supported values are <code>ADD</code>,
  * 			<code>REMOVE</code>, or <code>REPLACE</code> a domain.</p>
  */
 export declare class ValidationException extends __BaseException {
@@ -358,6 +358,19 @@ export declare const ResolverEndpointDirection: {
  * @public
  */
 export type ResolverEndpointDirection = (typeof ResolverEndpointDirection)[keyof typeof ResolverEndpointDirection];
+/**
+ * @public
+ * @enum
+ */
+export declare const Protocol: {
+    readonly DO53: "Do53";
+    readonly DOH: "DoH";
+    readonly DOHFIPS: "DoH-FIPS";
+};
+/**
+ * @public
+ */
+export type Protocol = (typeof Protocol)[keyof typeof Protocol];
 /**
  * @public
  * @enum
@@ -518,25 +531,68 @@ export interface ResolverEndpoint {
      * <p>The date and time that the endpoint was last modified, in Unix time format and Coordinated Universal Time (UTC).</p>
      */
     ModificationTime?: string;
+    /**
+     * @public
+     * <p>The ARN (Amazon Resource Name) for the Outpost.</p>
+     */
+    OutpostArn?: string;
     /**
      * @public
      * <p>
-     * 			The Resolver endpoint IP address type.
+     * 			The Amazon EC2 instance type.
      * 		</p>
      */
-    ResolverEndpointType?: ResolverEndpointType;
+    PreferredInstanceType?: string;
     /**
      * @public
-     * <p>The ARN (Amazon Resource Name) for the Outpost.</p>
+     * <p>
+     * 			The Resolver endpoint IP address type.
+     * 		</p>
      */
-    OutpostArn?: string;
+    ResolverEndpointType?: ResolverEndpointType;
     /**
      * @public
      * <p>
-     * 			The Amazon EC2 instance type.
+     * 			Protocols used for the endpoint. DoH-FIPS is applicable for inbound endpoints only.
      * 		</p>
+     *          <p>For an inbound endpoint you can apply the protocols as follows:</p>
+     *          <ul>
+     *             <li>
+     *                <p> Do53  and DoH in combination.</p>
+     *             </li>
+     *             <li>
+     *                <p>Do53  and DoH-FIPS in combination.</p>
+     *             </li>
+     *             <li>
+     *                <p>Do53 alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>DoH alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>DoH-FIPS alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>None, which is treated as Do53.</p>
+     *             </li>
+     *          </ul>
+     *          <p>For an outbound endpoint you can apply the protocols as follows:</p>
+     *          <ul>
+     *             <li>
+     *                <p> Do53  and DoH in combination.</p>
+     *             </li>
+     *             <li>
+     *                <p>Do53 alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>DoH alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>None, which is treated as Do53.</p>
+     *             </li>
+     *          </ul>
      */
-    PreferredInstanceType?: string;
+    Protocols?: Protocol[];
 }
 /**
  * @public
@@ -978,8 +1034,7 @@ export interface FirewallDomainList {
 export interface CreateFirewallDomainListResponse {
     /**
      * @public
-     * <p>The
-     * 			domain list that you just created.</p>
+     * <p>The domain list that you just created.</p>
      */
     FirewallDomainList?: FirewallDomainList;
 }
@@ -1525,8 +1580,22 @@ export interface CreateResolverEndpointRequest {
      * @public
      * <p>The subnets and IP addresses in your VPC that DNS queries originate from (for outbound endpoints) or that you forward
      * 			DNS queries to (for inbound endpoints). The subnet ID uniquely identifies a VPC. </p>
+     *          <note>
+     *             <p>Even though the minimum is 1, Route 53 requires that you create at least two.</p>
+     *          </note>
      */
     IpAddresses: IpAddressRequest[] | undefined;
+    /**
+     * @public
+     * <p>The Amazon Resource Name (ARN) of the Outpost. If you specify this, you must also specify a
+     * 			value for the <code>PreferredInstanceType</code>. </p>
+     */
+    OutpostArn?: string;
+    /**
+     * @public
+     * <p>The  instance type. If you specify this, you must also specify a value for the <code>OutpostArn</code>.</p>
+     */
+    PreferredInstanceType?: string;
     /**
      * @public
      * <p>A list of the tag keys and values that you want to associate with the endpoint.</p>
@@ -1543,15 +1612,47 @@ export interface CreateResolverEndpointRequest {
     ResolverEndpointType?: ResolverEndpointType;
     /**
      * @public
-     * <p>The Amazon Resource Name (ARN) of the Outpost. If you specify this, you must also specify a
-     * 			value for the <code>PreferredInstanceType</code>. </p>
-     */
-    OutpostArn?: string;
-    /**
-     * @public
-     * <p>The  instance type. If you specify this, you must also specify a value for the <code>OutpostArn</code>.</p>
+     * <p>
+     * 			The protocols you want to use for the endpoint. DoH-FIPS is applicable for inbound endpoints only.
+     * 		</p>
+     *          <p>For an inbound endpoint you can apply the protocols as follows:</p>
+     *          <ul>
+     *             <li>
+     *                <p> Do53  and DoH in combination.</p>
+     *             </li>
+     *             <li>
+     *                <p>Do53  and DoH-FIPS in combination.</p>
+     *             </li>
+     *             <li>
+     *                <p>Do53 alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>DoH alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>DoH-FIPS alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>None, which is treated as Do53.</p>
+     *             </li>
+     *          </ul>
+     *          <p>For an outbound endpoint you can apply the protocols as follows:</p>
+     *          <ul>
+     *             <li>
+     *                <p> Do53  and DoH in combination.</p>
+     *             </li>
+     *             <li>
+     *                <p>Do53 alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>DoH alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>None, which is treated as Do53.</p>
+     *             </li>
+     *          </ul>
      */
-    PreferredInstanceType?: string;
+    Protocols?: Protocol[];
 }
 /**
  * @public
@@ -1773,6 +1874,50 @@ export interface TargetAddress {
      * 		</p>
      */
     Ipv6?: string;
+    /**
+     * @public
+     * <p>
+     * 			The protocols for the Resolver endpoints. DoH-FIPS is applicable for inbound endpoints only.
+     *
+     * 		</p>
+     *          <p>For an inbound endpoint you can apply the protocols as follows:</p>
+     *          <ul>
+     *             <li>
+     *                <p> Do53  and DoH in combination.</p>
+     *             </li>
+     *             <li>
+     *                <p>Do53  and DoH-FIPS in combination.</p>
+     *             </li>
+     *             <li>
+     *                <p>Do53 alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>DoH alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>DoH-FIPS alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>None, which is treated as Do53.</p>
+     *             </li>
+     *          </ul>
+     *          <p>For an outbound endpoint you can apply the protocols as follows:</p>
+     *          <ul>
+     *             <li>
+     *                <p> Do53  and DoH in combination.</p>
+     *             </li>
+     *             <li>
+     *                <p>Do53 alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>DoH alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>None, which is treated as Do53.</p>
+     *             </li>
+     *          </ul>
+     */
+    Protocol?: Protocol;
 }
 /**
  * @public
@@ -1807,7 +1952,7 @@ export interface CreateResolverRuleRequest {
      * 			multiple Resolver rules (example.com and www.example.com), outbound DNS queries are routed using the Resolver rule that contains
      * 			the most specific domain name (www.example.com).</p>
      */
-    DomainName: string | undefined;
+    DomainName?: string;
     /**
      * @public
      * <p>The IPs that you want Resolver to forward DNS queries to. You can specify either Ipv4 or Ipv6 addresses but not both in the same rule. Separate IP addresses with a space.</p>
@@ -3643,7 +3788,8 @@ export interface ListResolverDnssecConfigsResponse {
      * @public
      * <p>An array that contains one
      * 			<a href="https://docs.aws.amazon.com/Route53/latest/APIReference/API_ResolverDnssecConfig.html">ResolverDnssecConfig</a> element
-     * 			for each configuration for DNSSEC validation that is associated with the current Amazon Web Services account.</p>
+     * 			for each configuration for DNSSEC validation that is associated with the current Amazon Web Services account.
+     * 			 It doesn't contain disabled DNSSEC configurations for the resource.</p>
      */
     ResolverDnssecConfigs?: ResolverDnssecConfig[];
 }
@@ -4853,6 +4999,57 @@ export interface UpdateResolverEndpointRequest {
      * 		</p>
      */
     UpdateIpAddresses?: UpdateIpAddress[];
+    /**
+     * @public
+     * <p>
+     * 			The protocols you want to use for the endpoint. DoH-FIPS is applicable for inbound endpoints only.
+     * 		</p>
+     *          <p>For an inbound endpoint you can apply the protocols as follows:</p>
+     *          <ul>
+     *             <li>
+     *                <p> Do53  and DoH in combination.</p>
+     *             </li>
+     *             <li>
+     *                <p>Do53  and DoH-FIPS in combination.</p>
+     *             </li>
+     *             <li>
+     *                <p>Do53 alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>DoH alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>DoH-FIPS alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>None, which is treated as Do53.</p>
+     *             </li>
+     *          </ul>
+     *          <p>For an outbound endpoint you can apply the protocols as follows:</p>
+     *          <ul>
+     *             <li>
+     *                <p> Do53  and DoH in combination.</p>
+     *             </li>
+     *             <li>
+     *                <p>Do53 alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>DoH alone.</p>
+     *             </li>
+     *             <li>
+     *                <p>None, which is treated as Do53.</p>
+     *             </li>
+     *          </ul>
+     *          <important>
+     *             <p> You can't change the protocol of an inbound endpoint directly from only Do53 to only DoH, or DoH-FIPS.
+     * 			This is to prevent a sudden disruption to incoming traffic that
+     * 			relies on Do53. To change the protocol from Do53 to DoH, or DoH-FIPS, you must
+     * 			first enable both Do53 and DoH, or Do53 and DoH-FIPS, to make sure that all incoming traffic
+     * 			has transferred to using the DoH protocol, or DoH-FIPS, and then remove the
+     * 			Do53.</p>
+     *          </important>
+     */
+    Protocols?: Protocol[];
 }
 /**
  * @public

package/dist-types/ts3.4/models/models_0.d.ts

@@ -122,6 +122,12 @@ export declare const ResolverEndpointDirection: {
 };
 export type ResolverEndpointDirection =
   (typeof ResolverEndpointDirection)[keyof typeof ResolverEndpointDirection];
+export declare const Protocol: {
+  readonly DO53: "Do53";
+  readonly DOH: "DoH";
+  readonly DOHFIPS: "DoH-FIPS";
+};
+export type Protocol = (typeof Protocol)[keyof typeof Protocol];
 export declare const ResolverEndpointType: {
   readonly DUALSTACK: "DUALSTACK";
   readonly IPV4: "IPV4";
@@ -152,9 +158,10 @@ export interface ResolverEndpoint {
   StatusMessage?: string;
   CreationTime?: string;
   ModificationTime?: string;
-  ResolverEndpointType?: ResolverEndpointType;
   OutpostArn?: string;
   PreferredInstanceType?: string;
+  ResolverEndpointType?: ResolverEndpointType;
+  Protocols?: Protocol[];
 }
 export interface AssociateResolverEndpointIpAddressResponse {
   ResolverEndpoint?: ResolverEndpoint;
@@ -416,10 +423,11 @@ export interface CreateResolverEndpointRequest {
   SecurityGroupIds: string[] | undefined;
   Direction: ResolverEndpointDirection | undefined;
   IpAddresses: IpAddressRequest[] | undefined;
-  Tags?: Tag[];
-  ResolverEndpointType?: ResolverEndpointType;
   OutpostArn?: string;
   PreferredInstanceType?: string;
+  Tags?: Tag[];
+  ResolverEndpointType?: ResolverEndpointType;
+  Protocols?: Protocol[];
 }
 export interface CreateResolverEndpointResponse {
   ResolverEndpoint?: ResolverEndpoint;
@@ -464,12 +472,13 @@ export interface TargetAddress {
   Ip?: string;
   Port?: number;
   Ipv6?: string;
+  Protocol?: Protocol;
 }
 export interface CreateResolverRuleRequest {
   CreatorRequestId: string | undefined;
   Name?: string;
   RuleType: RuleTypeOption | undefined;
-  DomainName: string | undefined;
+  DomainName?: string;
   TargetIps?: TargetAddress[];
   ResolverEndpointId?: string;
   Tags?: Tag[];
@@ -1092,6 +1101,7 @@ export interface UpdateResolverEndpointRequest {
   Name?: string;
   ResolverEndpointType?: ResolverEndpointType;
   UpdateIpAddresses?: UpdateIpAddress[];
+  Protocols?: Protocol[];
 }
 export interface UpdateResolverEndpointResponse {
   ResolverEndpoint?: ResolverEndpoint;

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@aws-sdk/client-route53resolver",
   "description": "AWS SDK for JavaScript Route53resolver Client for Node.js, Browser and React Native",
-  "version": "3.473.0",
+  "version": "3.476.0",
   "scripts": {
     "build": "concurrently 'yarn:build:cjs' 'yarn:build:es' 'yarn:build:types'",
     "build:cjs": "tsc -p tsconfig.cjs.json",
@@ -20,9 +20,9 @@
   "dependencies": {
     "@aws-crypto/sha256-browser": "3.0.0",
     "@aws-crypto/sha256-js": "3.0.0",
-    "@aws-sdk/client-sts": "3.473.0",
-    "@aws-sdk/core": "3.468.0",
-    "@aws-sdk/credential-provider-node": "3.470.0",
+    "@aws-sdk/client-sts": "3.476.0",
+    "@aws-sdk/core": "3.476.0",
+    "@aws-sdk/credential-provider-node": "3.476.0",
     "@aws-sdk/middleware-host-header": "3.468.0",
     "@aws-sdk/middleware-logger": "3.468.0",
     "@aws-sdk/middleware-recursion-detection": "3.468.0",