@aws-sdk/client-network-firewall 3.32.0 → 3.36.0

package/NetworkFirewallClient.ts

@@ -1,446 +0,0 @@
-import {
-  AssociateFirewallPolicyCommandInput,
-  AssociateFirewallPolicyCommandOutput,
-} from "./commands/AssociateFirewallPolicyCommand";
-import { AssociateSubnetsCommandInput, AssociateSubnetsCommandOutput } from "./commands/AssociateSubnetsCommand";
-import { CreateFirewallCommandInput, CreateFirewallCommandOutput } from "./commands/CreateFirewallCommand";
-import {
-  CreateFirewallPolicyCommandInput,
-  CreateFirewallPolicyCommandOutput,
-} from "./commands/CreateFirewallPolicyCommand";
-import { CreateRuleGroupCommandInput, CreateRuleGroupCommandOutput } from "./commands/CreateRuleGroupCommand";
-import { DeleteFirewallCommandInput, DeleteFirewallCommandOutput } from "./commands/DeleteFirewallCommand";
-import {
-  DeleteFirewallPolicyCommandInput,
-  DeleteFirewallPolicyCommandOutput,
-} from "./commands/DeleteFirewallPolicyCommand";
-import {
-  DeleteResourcePolicyCommandInput,
-  DeleteResourcePolicyCommandOutput,
-} from "./commands/DeleteResourcePolicyCommand";
-import { DeleteRuleGroupCommandInput, DeleteRuleGroupCommandOutput } from "./commands/DeleteRuleGroupCommand";
-import { DescribeFirewallCommandInput, DescribeFirewallCommandOutput } from "./commands/DescribeFirewallCommand";
-import {
-  DescribeFirewallPolicyCommandInput,
-  DescribeFirewallPolicyCommandOutput,
-} from "./commands/DescribeFirewallPolicyCommand";
-import {
-  DescribeLoggingConfigurationCommandInput,
-  DescribeLoggingConfigurationCommandOutput,
-} from "./commands/DescribeLoggingConfigurationCommand";
-import {
-  DescribeResourcePolicyCommandInput,
-  DescribeResourcePolicyCommandOutput,
-} from "./commands/DescribeResourcePolicyCommand";
-import { DescribeRuleGroupCommandInput, DescribeRuleGroupCommandOutput } from "./commands/DescribeRuleGroupCommand";
-import {
-  DisassociateSubnetsCommandInput,
-  DisassociateSubnetsCommandOutput,
-} from "./commands/DisassociateSubnetsCommand";
-import {
-  ListFirewallPoliciesCommandInput,
-  ListFirewallPoliciesCommandOutput,
-} from "./commands/ListFirewallPoliciesCommand";
-import { ListFirewallsCommandInput, ListFirewallsCommandOutput } from "./commands/ListFirewallsCommand";
-import { ListRuleGroupsCommandInput, ListRuleGroupsCommandOutput } from "./commands/ListRuleGroupsCommand";
-import {
-  ListTagsForResourceCommandInput,
-  ListTagsForResourceCommandOutput,
-} from "./commands/ListTagsForResourceCommand";
-import { PutResourcePolicyCommandInput, PutResourcePolicyCommandOutput } from "./commands/PutResourcePolicyCommand";
-import { TagResourceCommandInput, TagResourceCommandOutput } from "./commands/TagResourceCommand";
-import { UntagResourceCommandInput, UntagResourceCommandOutput } from "./commands/UntagResourceCommand";
-import {
-  UpdateFirewallDeleteProtectionCommandInput,
-  UpdateFirewallDeleteProtectionCommandOutput,
-} from "./commands/UpdateFirewallDeleteProtectionCommand";
-import {
-  UpdateFirewallDescriptionCommandInput,
-  UpdateFirewallDescriptionCommandOutput,
-} from "./commands/UpdateFirewallDescriptionCommand";
-import {
-  UpdateFirewallPolicyChangeProtectionCommandInput,
-  UpdateFirewallPolicyChangeProtectionCommandOutput,
-} from "./commands/UpdateFirewallPolicyChangeProtectionCommand";
-import {
-  UpdateFirewallPolicyCommandInput,
-  UpdateFirewallPolicyCommandOutput,
-} from "./commands/UpdateFirewallPolicyCommand";
-import {
-  UpdateLoggingConfigurationCommandInput,
-  UpdateLoggingConfigurationCommandOutput,
-} from "./commands/UpdateLoggingConfigurationCommand";
-import { UpdateRuleGroupCommandInput, UpdateRuleGroupCommandOutput } from "./commands/UpdateRuleGroupCommand";
-import {
-  UpdateSubnetChangeProtectionCommandInput,
-  UpdateSubnetChangeProtectionCommandOutput,
-} from "./commands/UpdateSubnetChangeProtectionCommand";
-import { getRuntimeConfig as __getRuntimeConfig } from "./runtimeConfig";
-import {
-  EndpointsInputConfig,
-  EndpointsResolvedConfig,
-  RegionInputConfig,
-  RegionResolvedConfig,
-  resolveEndpointsConfig,
-  resolveRegionConfig,
-} from "@aws-sdk/config-resolver";
-import { getContentLengthPlugin } from "@aws-sdk/middleware-content-length";
-import {
-  HostHeaderInputConfig,
-  HostHeaderResolvedConfig,
-  getHostHeaderPlugin,
-  resolveHostHeaderConfig,
-} from "@aws-sdk/middleware-host-header";
-import { getLoggerPlugin } from "@aws-sdk/middleware-logger";
-import { RetryInputConfig, RetryResolvedConfig, getRetryPlugin, resolveRetryConfig } from "@aws-sdk/middleware-retry";
-import {
-  AwsAuthInputConfig,
-  AwsAuthResolvedConfig,
-  getAwsAuthPlugin,
-  resolveAwsAuthConfig,
-} from "@aws-sdk/middleware-signing";
-import {
-  UserAgentInputConfig,
-  UserAgentResolvedConfig,
-  getUserAgentPlugin,
-  resolveUserAgentConfig,
-} from "@aws-sdk/middleware-user-agent";
-import { HttpHandler as __HttpHandler } from "@aws-sdk/protocol-http";
-import {
-  Client as __Client,
-  SmithyConfiguration as __SmithyConfiguration,
-  SmithyResolvedConfiguration as __SmithyResolvedConfiguration,
-} from "@aws-sdk/smithy-client";
-import {
-  Provider,
-  RegionInfoProvider,
-  Credentials as __Credentials,
-  Decoder as __Decoder,
-  Encoder as __Encoder,
-  Hash as __Hash,
-  HashConstructor as __HashConstructor,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  Logger as __Logger,
-  Provider as __Provider,
-  StreamCollector as __StreamCollector,
-  UrlParser as __UrlParser,
-  UserAgent as __UserAgent,
-} from "@aws-sdk/types";
-
-export type ServiceInputTypes =
-  | AssociateFirewallPolicyCommandInput
-  | AssociateSubnetsCommandInput
-  | CreateFirewallCommandInput
-  | CreateFirewallPolicyCommandInput
-  | CreateRuleGroupCommandInput
-  | DeleteFirewallCommandInput
-  | DeleteFirewallPolicyCommandInput
-  | DeleteResourcePolicyCommandInput
-  | DeleteRuleGroupCommandInput
-  | DescribeFirewallCommandInput
-  | DescribeFirewallPolicyCommandInput
-  | DescribeLoggingConfigurationCommandInput
-  | DescribeResourcePolicyCommandInput
-  | DescribeRuleGroupCommandInput
-  | DisassociateSubnetsCommandInput
-  | ListFirewallPoliciesCommandInput
-  | ListFirewallsCommandInput
-  | ListRuleGroupsCommandInput
-  | ListTagsForResourceCommandInput
-  | PutResourcePolicyCommandInput
-  | TagResourceCommandInput
-  | UntagResourceCommandInput
-  | UpdateFirewallDeleteProtectionCommandInput
-  | UpdateFirewallDescriptionCommandInput
-  | UpdateFirewallPolicyChangeProtectionCommandInput
-  | UpdateFirewallPolicyCommandInput
-  | UpdateLoggingConfigurationCommandInput
-  | UpdateRuleGroupCommandInput
-  | UpdateSubnetChangeProtectionCommandInput;
-
-export type ServiceOutputTypes =
-  | AssociateFirewallPolicyCommandOutput
-  | AssociateSubnetsCommandOutput
-  | CreateFirewallCommandOutput
-  | CreateFirewallPolicyCommandOutput
-  | CreateRuleGroupCommandOutput
-  | DeleteFirewallCommandOutput
-  | DeleteFirewallPolicyCommandOutput
-  | DeleteResourcePolicyCommandOutput
-  | DeleteRuleGroupCommandOutput
-  | DescribeFirewallCommandOutput
-  | DescribeFirewallPolicyCommandOutput
-  | DescribeLoggingConfigurationCommandOutput
-  | DescribeResourcePolicyCommandOutput
-  | DescribeRuleGroupCommandOutput
-  | DisassociateSubnetsCommandOutput
-  | ListFirewallPoliciesCommandOutput
-  | ListFirewallsCommandOutput
-  | ListRuleGroupsCommandOutput
-  | ListTagsForResourceCommandOutput
-  | PutResourcePolicyCommandOutput
-  | TagResourceCommandOutput
-  | UntagResourceCommandOutput
-  | UpdateFirewallDeleteProtectionCommandOutput
-  | UpdateFirewallDescriptionCommandOutput
-  | UpdateFirewallPolicyChangeProtectionCommandOutput
-  | UpdateFirewallPolicyCommandOutput
-  | UpdateLoggingConfigurationCommandOutput
-  | UpdateRuleGroupCommandOutput
-  | UpdateSubnetChangeProtectionCommandOutput;
-
-export interface ClientDefaults extends Partial<__SmithyResolvedConfiguration<__HttpHandlerOptions>> {
-  /**
-   * The HTTP handler to use. Fetch in browser and Https in Nodejs.
-   */
-  requestHandler?: __HttpHandler;
-
-  /**
-   * A constructor for a class implementing the {@link __Hash} interface
-   * that computes the SHA-256 HMAC or checksum of a string or binary buffer.
-   * @internal
-   */
-  sha256?: __HashConstructor;
-
-  /**
-   * The function that will be used to convert strings into HTTP endpoints.
-   * @internal
-   */
-  urlParser?: __UrlParser;
-
-  /**
-   * A function that can calculate the length of a request body.
-   * @internal
-   */
-  bodyLengthChecker?: (body: any) => number | undefined;
-
-  /**
-   * A function that converts a stream into an array of bytes.
-   * @internal
-   */
-  streamCollector?: __StreamCollector;
-
-  /**
-   * The function that will be used to convert a base64-encoded string to a byte array.
-   * @internal
-   */
-  base64Decoder?: __Decoder;
-
-  /**
-   * The function that will be used to convert binary data to a base64-encoded string.
-   * @internal
-   */
-  base64Encoder?: __Encoder;
-
-  /**
-   * The function that will be used to convert a UTF8-encoded string to a byte array.
-   * @internal
-   */
-  utf8Decoder?: __Decoder;
-
-  /**
-   * The function that will be used to convert binary data to a UTF-8 encoded string.
-   * @internal
-   */
-  utf8Encoder?: __Encoder;
-
-  /**
-   * The runtime environment.
-   * @internal
-   */
-  runtime?: string;
-
-  /**
-   * Disable dyanamically changing the endpoint of the client based on the hostPrefix
-   * trait of an operation.
-   */
-  disableHostPrefix?: boolean;
-
-  /**
-   * Value for how many times a request will be made at most in case of retry.
-   */
-  maxAttempts?: number | __Provider<number>;
-
-  /**
-   * Specifies which retry algorithm to use.
-   */
-  retryMode?: string | __Provider<string>;
-
-  /**
-   * Optional logger for logging debug/info/warn/error.
-   */
-  logger?: __Logger;
-
-  /**
-   * Unique service identifier.
-   * @internal
-   */
-  serviceId?: string;
-
-  /**
-   * The AWS region to which this client will send requests
-   */
-  region?: string | __Provider<string>;
-
-  /**
-   * Default credentials provider; Not available in browser runtime.
-   * @internal
-   */
-  credentialDefaultProvider?: (input: any) => __Provider<__Credentials>;
-
-  /**
-   * Fetch related hostname, signing name or signing region with given region.
-   * @internal
-   */
-  regionInfoProvider?: RegionInfoProvider;
-
-  /**
-   * The provider populating default tracking information to be sent with `user-agent`, `x-amz-user-agent` header
-   * @internal
-   */
-  defaultUserAgentProvider?: Provider<__UserAgent>;
-}
-
-type NetworkFirewallClientConfigType = Partial<__SmithyConfiguration<__HttpHandlerOptions>> &
-  ClientDefaults &
-  RegionInputConfig &
-  EndpointsInputConfig &
-  RetryInputConfig &
-  HostHeaderInputConfig &
-  AwsAuthInputConfig &
-  UserAgentInputConfig;
-/**
- * The configuration interface of NetworkFirewallClient class constructor that set the region, credentials and other options.
- */
-export interface NetworkFirewallClientConfig extends NetworkFirewallClientConfigType {}
-
-type NetworkFirewallClientResolvedConfigType = __SmithyResolvedConfiguration<__HttpHandlerOptions> &
-  Required<ClientDefaults> &
-  RegionResolvedConfig &
-  EndpointsResolvedConfig &
-  RetryResolvedConfig &
-  HostHeaderResolvedConfig &
-  AwsAuthResolvedConfig &
-  UserAgentResolvedConfig;
-/**
- * The resolved configuration interface of NetworkFirewallClient class. This is resolved and normalized from the {@link NetworkFirewallClientConfig | constructor configuration interface}.
- */
-export interface NetworkFirewallClientResolvedConfig extends NetworkFirewallClientResolvedConfigType {}
-
-/**
- * <p>This is the API Reference for AWS Network Firewall. This guide is for developers who need
- *          detailed information about the Network Firewall API actions, data types, and errors. </p>
- *          <ul>
- *             <li>
- *                <p>The REST API requires you to handle connection details, such as calculating
- *                signatures, handling request retries, and error handling. For general information
- *                about using the AWS REST APIs, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-apis.html">AWS APIs</a>. </p>
- *                <p>To access Network Firewall using the REST API endpoint:
- *                   <code>https://network-firewall.<region>.amazonaws.com </code>
- *                </p>
- *             </li>
- *             <li>
- *                <p>Alternatively, you can use one of the AWS SDKs to access an API that's tailored to
- *                the programming language or platform that you're using. For more information, see
- *                   <a href="http://aws.amazon.com/tools/#SDKs">AWS SDKs</a>.</p>
- *             </li>
- *             <li>
- *                <p>For descriptions of Network Firewall features, including and step-by-step
- *                instructions on how to use them through the Network Firewall console, see the <a href="https://docs.aws.amazon.com/network-firewall/latest/developerguide/">Network Firewall Developer
- *                   Guide</a>.</p>
- *             </li>
- *          </ul>
- *          <p>Network Firewall is a stateful, managed, network firewall and intrusion detection and
- *          prevention service for Amazon Virtual Private Cloud (Amazon VPC). With Network Firewall, you can filter traffic at the
- *          perimeter of your VPC. This includes filtering traffic going to and coming from an internet
- *          gateway, NAT gateway, or over VPN or AWS Direct Connect. Network Firewall uses rules that are compatible
- *           with Suricata, a free, open source intrusion detection system (IDS) engine. For information about Suricata,
- *           see the <a href="https://suricata-ids.org/">Suricata website</a>.</p>
- *          <p>You can use Network Firewall to monitor and protect your VPC traffic in a number of ways.
- *          The following are just a few examples: </p>
- *          <ul>
- *             <li>
- *                <p>Allow domains or IP addresses for known AWS service endpoints, such as Amazon S3, and
- *                block all other forms of traffic.</p>
- *             </li>
- *             <li>
- *                <p>Use custom lists of known bad domains to limit the types of domain names that your
- *                applications can access.</p>
- *             </li>
- *             <li>
- *                <p>Perform deep packet inspection on traffic entering or leaving your VPC.</p>
- *             </li>
- *             <li>
- *                <p>Use stateful protocol detection to filter protocols like HTTPS, regardless of the
- *                port used.</p>
- *             </li>
- *          </ul>
- *          <p>To enable Network Firewall for your VPCs, you perform steps in both Amazon VPC and in
- *          Network Firewall. For information about using Amazon VPC, see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/">Amazon VPC User Guide</a>.</p>
- *          <p>To start using Network Firewall, do the following: </p>
- *          <ol>
- *             <li>
- *                <p>(Optional) If you don't already have a VPC that you want to protect, create it in
- *                Amazon VPC. </p>
- *             </li>
- *             <li>
- *                <p>In Amazon VPC, in each Availability Zone where you want to have a firewall endpoint, create a
- *                subnet for the sole use of Network Firewall. </p>
- *             </li>
- *             <li>
- *                <p>In Network Firewall, create stateless and stateful rule groups,
- *                  to define the components of the network traffic filtering behavior that you want your firewall to have. </p>
- *             </li>
- *             <li>
- *                <p>In Network Firewall, create a firewall policy that uses your rule groups and
- *                  specifies additional default traffic filtering behavior. </p>
- *             </li>
- *             <li>
- *                <p>In Network Firewall, create a firewall and specify your new firewall policy and
- *                  VPC subnets. Network Firewall creates a firewall endpoint in each subnet that you
- *                specify, with the behavior that's defined in the firewall policy.</p>
- *             </li>
- *             <li>
- *                <p>In Amazon VPC, use ingress routing enhancements to route traffic through the new firewall
- *                endpoints.</p>
- *             </li>
- *          </ol>
- */
-export class NetworkFirewallClient extends __Client<
-  __HttpHandlerOptions,
-  ServiceInputTypes,
-  ServiceOutputTypes,
-  NetworkFirewallClientResolvedConfig
-> {
-  /**
-   * The resolved configuration of NetworkFirewallClient class. This is resolved and normalized from the {@link NetworkFirewallClientConfig | constructor configuration interface}.
-   */
-  readonly config: NetworkFirewallClientResolvedConfig;
-
-  constructor(configuration: NetworkFirewallClientConfig) {
-    let _config_0 = __getRuntimeConfig(configuration);
-    let _config_1 = resolveRegionConfig(_config_0);
-    let _config_2 = resolveEndpointsConfig(_config_1);
-    let _config_3 = resolveRetryConfig(_config_2);
-    let _config_4 = resolveHostHeaderConfig(_config_3);
-    let _config_5 = resolveAwsAuthConfig(_config_4);
-    let _config_6 = resolveUserAgentConfig(_config_5);
-    super(_config_6);
-    this.config = _config_6;
-    this.middlewareStack.use(getRetryPlugin(this.config));
-    this.middlewareStack.use(getContentLengthPlugin(this.config));
-    this.middlewareStack.use(getHostHeaderPlugin(this.config));
-    this.middlewareStack.use(getLoggerPlugin(this.config));
-    this.middlewareStack.use(getAwsAuthPlugin(this.config));
-    this.middlewareStack.use(getUserAgentPlugin(this.config));
-  }
-
-  /**
-   * Destroy underlying resources, like sockets. It's usually not necessary to do this.
-   * However in Node.js, it's best to explicitly shut down the client's agent when it is no longer needed.
-   * Otherwise, sockets might stay open for quite a long time before the server terminates them.
-   */
-  destroy(): void {
-    super.destroy();
-  }
-}

package/commands/AssociateFirewallPolicyCommand.ts

@@ -1,98 +0,0 @@
-import { NetworkFirewallClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../NetworkFirewallClient";
-import { AssociateFirewallPolicyRequest, AssociateFirewallPolicyResponse } from "../models/models_0";
-import {
-  deserializeAws_json1_0AssociateFirewallPolicyCommand,
-  serializeAws_json1_0AssociateFirewallPolicyCommand,
-} from "../protocols/Aws_json1_0";
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  MiddlewareStack,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-export interface AssociateFirewallPolicyCommandInput extends AssociateFirewallPolicyRequest {}
-export interface AssociateFirewallPolicyCommandOutput extends AssociateFirewallPolicyResponse, __MetadataBearer {}
-
-/**
- * <p>Associates a <a>FirewallPolicy</a> to a <a>Firewall</a>. </p>
- *          <p>A firewall policy defines how to monitor and manage your VPC network traffic, using a
- *          collection of inspection rule groups and other settings. Each firewall requires one
- *          firewall policy association, and you can use the same firewall policy for multiple
- *          firewalls. </p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { NetworkFirewallClient, AssociateFirewallPolicyCommand } from "@aws-sdk/client-network-firewall"; // ES Modules import
- * // const { NetworkFirewallClient, AssociateFirewallPolicyCommand } = require("@aws-sdk/client-network-firewall"); // CommonJS import
- * const client = new NetworkFirewallClient(config);
- * const command = new AssociateFirewallPolicyCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link AssociateFirewallPolicyCommandInput} for command's `input` shape.
- * @see {@link AssociateFirewallPolicyCommandOutput} for command's `response` shape.
- * @see {@link NetworkFirewallClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class AssociateFirewallPolicyCommand extends $Command<
-  AssociateFirewallPolicyCommandInput,
-  AssociateFirewallPolicyCommandOutput,
-  NetworkFirewallClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: AssociateFirewallPolicyCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: NetworkFirewallClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<AssociateFirewallPolicyCommandInput, AssociateFirewallPolicyCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "NetworkFirewallClient";
-    const commandName = "AssociateFirewallPolicyCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: AssociateFirewallPolicyRequest.filterSensitiveLog,
-      outputFilterSensitiveLog: AssociateFirewallPolicyResponse.filterSensitiveLog,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: AssociateFirewallPolicyCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_0AssociateFirewallPolicyCommand(input, context);
-  }
-
-  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<AssociateFirewallPolicyCommandOutput> {
-    return deserializeAws_json1_0AssociateFirewallPolicyCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}

package/commands/AssociateSubnetsCommand.ts

@@ -1,99 +0,0 @@
-import { NetworkFirewallClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../NetworkFirewallClient";
-import { AssociateSubnetsRequest, AssociateSubnetsResponse } from "../models/models_0";
-import {
-  deserializeAws_json1_0AssociateSubnetsCommand,
-  serializeAws_json1_0AssociateSubnetsCommand,
-} from "../protocols/Aws_json1_0";
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  MiddlewareStack,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-export interface AssociateSubnetsCommandInput extends AssociateSubnetsRequest {}
-export interface AssociateSubnetsCommandOutput extends AssociateSubnetsResponse, __MetadataBearer {}
-
-/**
- * <p>Associates the specified subnets in the Amazon VPC to the firewall. You can specify one
- *          subnet for each of the Availability Zones that the VPC spans. </p>
- *          <p>This request creates an AWS Network Firewall firewall endpoint in each of the subnets. To
- *          enable the firewall's protections, you must also modify the VPC's route tables for each
- *          subnet's Availability Zone, to redirect the traffic that's coming into and going out of the
- *          zone through the firewall endpoint. </p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { NetworkFirewallClient, AssociateSubnetsCommand } from "@aws-sdk/client-network-firewall"; // ES Modules import
- * // const { NetworkFirewallClient, AssociateSubnetsCommand } = require("@aws-sdk/client-network-firewall"); // CommonJS import
- * const client = new NetworkFirewallClient(config);
- * const command = new AssociateSubnetsCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link AssociateSubnetsCommandInput} for command's `input` shape.
- * @see {@link AssociateSubnetsCommandOutput} for command's `response` shape.
- * @see {@link NetworkFirewallClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class AssociateSubnetsCommand extends $Command<
-  AssociateSubnetsCommandInput,
-  AssociateSubnetsCommandOutput,
-  NetworkFirewallClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: AssociateSubnetsCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: NetworkFirewallClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<AssociateSubnetsCommandInput, AssociateSubnetsCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "NetworkFirewallClient";
-    const commandName = "AssociateSubnetsCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: AssociateSubnetsRequest.filterSensitiveLog,
-      outputFilterSensitiveLog: AssociateSubnetsResponse.filterSensitiveLog,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: AssociateSubnetsCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_0AssociateSubnetsCommand(input, context);
-  }
-
-  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<AssociateSubnetsCommandOutput> {
-    return deserializeAws_json1_0AssociateSubnetsCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}