@aws-sdk/client-lightsail 3.35.0 → 3.36.0

package/src/commands/CreateDiskSnapshotCommand.ts

@@ -1,114 +0,0 @@
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  MiddlewareStack,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-import { LightsailClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../LightsailClient";
-import { CreateDiskSnapshotRequest, CreateDiskSnapshotResult } from "../models/models_0";
-import {
-  deserializeAws_json1_1CreateDiskSnapshotCommand,
-  serializeAws_json1_1CreateDiskSnapshotCommand,
-} from "../protocols/Aws_json1_1";
-
-export interface CreateDiskSnapshotCommandInput extends CreateDiskSnapshotRequest {}
-export interface CreateDiskSnapshotCommandOutput extends CreateDiskSnapshotResult, __MetadataBearer {}
-
-/**
- * <p>Creates a snapshot of a block storage disk. You can use snapshots for backups, to make
- *       copies of disks, and to save data before shutting down a Lightsail instance.</p>
- *          <p>You can take a snapshot of an attached disk that is in use; however, snapshots only
- *       capture data that has been written to your disk at the time the snapshot command is issued.
- *       This may exclude any data that has been cached by any applications or the operating system. If
- *       you can pause any file systems on the disk long enough to take a snapshot, your snapshot
- *       should be complete. Nevertheless, if you cannot pause all file writes to the disk, you should
- *       unmount the disk from within the Lightsail instance, issue the create disk snapshot command,
- *       and then remount the disk to ensure a consistent and complete snapshot. You may remount and
- *       use your disk while the snapshot status is pending.</p>
- *          <p>You can also use this operation to create a snapshot of an instance's system volume. You
- *       might want to do this, for example, to recover data from the system volume of a botched
- *       instance or to create a backup of the system volume like you would for a block storage disk.
- *       To create a snapshot of a system volume, just define the <code>instance name</code> parameter
- *       when issuing the snapshot command, and a snapshot of the defined instance's system volume will
- *       be created. After the snapshot is available, you can create a block storage disk from the
- *       snapshot and attach it to a running instance to access the data on the disk.</p>
- *
- *          <p>The <code>create disk snapshot</code> operation supports tag-based access control via
- *       request tags. For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon Lightsail Developer Guide</a>.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { LightsailClient, CreateDiskSnapshotCommand } from "@aws-sdk/client-lightsail"; // ES Modules import
- * // const { LightsailClient, CreateDiskSnapshotCommand } = require("@aws-sdk/client-lightsail"); // CommonJS import
- * const client = new LightsailClient(config);
- * const command = new CreateDiskSnapshotCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link CreateDiskSnapshotCommandInput} for command's `input` shape.
- * @see {@link CreateDiskSnapshotCommandOutput} for command's `response` shape.
- * @see {@link LightsailClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class CreateDiskSnapshotCommand extends $Command<
-  CreateDiskSnapshotCommandInput,
-  CreateDiskSnapshotCommandOutput,
-  LightsailClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: CreateDiskSnapshotCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: LightsailClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<CreateDiskSnapshotCommandInput, CreateDiskSnapshotCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "LightsailClient";
-    const commandName = "CreateDiskSnapshotCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: CreateDiskSnapshotRequest.filterSensitiveLog,
-      outputFilterSensitiveLog: CreateDiskSnapshotResult.filterSensitiveLog,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: CreateDiskSnapshotCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_1CreateDiskSnapshotCommand(input, context);
-  }
-
-  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<CreateDiskSnapshotCommandOutput> {
-    return deserializeAws_json1_1CreateDiskSnapshotCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}

package/src/commands/CreateDistributionCommand.ts

@@ -1,98 +0,0 @@
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  MiddlewareStack,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-import { LightsailClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../LightsailClient";
-import { CreateDistributionRequest, CreateDistributionResult } from "../models/models_0";
-import {
-  deserializeAws_json1_1CreateDistributionCommand,
-  serializeAws_json1_1CreateDistributionCommand,
-} from "../protocols/Aws_json1_1";
-
-export interface CreateDistributionCommandInput extends CreateDistributionRequest {}
-export interface CreateDistributionCommandOutput extends CreateDistributionResult, __MetadataBearer {}
-
-/**
- * <p>Creates an Amazon Lightsail content delivery network (CDN) distribution.</p>
- *          <p>A distribution is a globally distributed network of caching servers that improve the
- *       performance of your website or web application hosted on a Lightsail instance. For more
- *       information, see <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-content-delivery-network-distributions">Content delivery networks in Amazon Lightsail</a>.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { LightsailClient, CreateDistributionCommand } from "@aws-sdk/client-lightsail"; // ES Modules import
- * // const { LightsailClient, CreateDistributionCommand } = require("@aws-sdk/client-lightsail"); // CommonJS import
- * const client = new LightsailClient(config);
- * const command = new CreateDistributionCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link CreateDistributionCommandInput} for command's `input` shape.
- * @see {@link CreateDistributionCommandOutput} for command's `response` shape.
- * @see {@link LightsailClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class CreateDistributionCommand extends $Command<
-  CreateDistributionCommandInput,
-  CreateDistributionCommandOutput,
-  LightsailClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: CreateDistributionCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: LightsailClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<CreateDistributionCommandInput, CreateDistributionCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "LightsailClient";
-    const commandName = "CreateDistributionCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: CreateDistributionRequest.filterSensitiveLog,
-      outputFilterSensitiveLog: CreateDistributionResult.filterSensitiveLog,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: CreateDistributionCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_1CreateDistributionCommand(input, context);
-  }
-
-  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<CreateDistributionCommandOutput> {
-    return deserializeAws_json1_1CreateDistributionCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}

package/src/commands/CreateDomainCommand.ts

@@ -1,97 +0,0 @@
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  MiddlewareStack,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-import { LightsailClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../LightsailClient";
-import { CreateDomainRequest, CreateDomainResult } from "../models/models_0";
-import {
-  deserializeAws_json1_1CreateDomainCommand,
-  serializeAws_json1_1CreateDomainCommand,
-} from "../protocols/Aws_json1_1";
-
-export interface CreateDomainCommandInput extends CreateDomainRequest {}
-export interface CreateDomainCommandOutput extends CreateDomainResult, __MetadataBearer {}
-
-/**
- * <p>Creates a domain resource for the specified domain (e.g., example.com).</p>
- *          <p>The <code>create domain</code> operation supports tag-based access control via request
- *       tags. For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon Lightsail Developer Guide</a>.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { LightsailClient, CreateDomainCommand } from "@aws-sdk/client-lightsail"; // ES Modules import
- * // const { LightsailClient, CreateDomainCommand } = require("@aws-sdk/client-lightsail"); // CommonJS import
- * const client = new LightsailClient(config);
- * const command = new CreateDomainCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link CreateDomainCommandInput} for command's `input` shape.
- * @see {@link CreateDomainCommandOutput} for command's `response` shape.
- * @see {@link LightsailClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class CreateDomainCommand extends $Command<
-  CreateDomainCommandInput,
-  CreateDomainCommandOutput,
-  LightsailClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: CreateDomainCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: LightsailClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<CreateDomainCommandInput, CreateDomainCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "LightsailClient";
-    const commandName = "CreateDomainCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: CreateDomainRequest.filterSensitiveLog,
-      outputFilterSensitiveLog: CreateDomainResult.filterSensitiveLog,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: CreateDomainCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_1CreateDomainCommand(input, context);
-  }
-
-  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<CreateDomainCommandOutput> {
-    return deserializeAws_json1_1CreateDomainCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}

package/src/commands/CreateDomainEntryCommand.ts

@@ -1,103 +0,0 @@
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  MiddlewareStack,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-import { LightsailClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../LightsailClient";
-import { CreateDomainEntryRequest, CreateDomainEntryResult } from "../models/models_0";
-import {
-  deserializeAws_json1_1CreateDomainEntryCommand,
-  serializeAws_json1_1CreateDomainEntryCommand,
-} from "../protocols/Aws_json1_1";
-
-export interface CreateDomainEntryCommandInput extends CreateDomainEntryRequest {}
-export interface CreateDomainEntryCommandOutput extends CreateDomainEntryResult, __MetadataBearer {}
-
-/**
- * <p>Creates one of the following domain name system (DNS) records in a domain DNS zone:
- *       Address (A), canonical name (CNAME), mail exchanger (MX), name server (NS), start of authority
- *       (SOA), service locator (SRV), or text (TXT).</p>
- *
- *
- *
- *          <p>The <code>create domain entry</code> operation supports tag-based access control via
- *       resource tags applied to the resource identified by <code>domain name</code>. For more
- *       information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon Lightsail Developer Guide</a>.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { LightsailClient, CreateDomainEntryCommand } from "@aws-sdk/client-lightsail"; // ES Modules import
- * // const { LightsailClient, CreateDomainEntryCommand } = require("@aws-sdk/client-lightsail"); // CommonJS import
- * const client = new LightsailClient(config);
- * const command = new CreateDomainEntryCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link CreateDomainEntryCommandInput} for command's `input` shape.
- * @see {@link CreateDomainEntryCommandOutput} for command's `response` shape.
- * @see {@link LightsailClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class CreateDomainEntryCommand extends $Command<
-  CreateDomainEntryCommandInput,
-  CreateDomainEntryCommandOutput,
-  LightsailClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: CreateDomainEntryCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: LightsailClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<CreateDomainEntryCommandInput, CreateDomainEntryCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "LightsailClient";
-    const commandName = "CreateDomainEntryCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: CreateDomainEntryRequest.filterSensitiveLog,
-      outputFilterSensitiveLog: CreateDomainEntryResult.filterSensitiveLog,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: CreateDomainEntryCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_1CreateDomainEntryCommand(input, context);
-  }
-
-  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<CreateDomainEntryCommandOutput> {
-    return deserializeAws_json1_1CreateDomainEntryCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}

package/src/commands/CreateInstanceSnapshotCommand.ts

@@ -1,98 +0,0 @@
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  MiddlewareStack,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-import { LightsailClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../LightsailClient";
-import { CreateInstanceSnapshotRequest, CreateInstanceSnapshotResult } from "../models/models_0";
-import {
-  deserializeAws_json1_1CreateInstanceSnapshotCommand,
-  serializeAws_json1_1CreateInstanceSnapshotCommand,
-} from "../protocols/Aws_json1_1";
-
-export interface CreateInstanceSnapshotCommandInput extends CreateInstanceSnapshotRequest {}
-export interface CreateInstanceSnapshotCommandOutput extends CreateInstanceSnapshotResult, __MetadataBearer {}
-
-/**
- * <p>Creates a snapshot of a specific virtual private server, or <i>instance</i>.
- *       You can use a snapshot to create a new instance that is based on that snapshot.</p>
- *          <p>The <code>create instance snapshot</code> operation supports tag-based access control via
- *       request tags. For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Amazon Lightsail Developer Guide</a>.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { LightsailClient, CreateInstanceSnapshotCommand } from "@aws-sdk/client-lightsail"; // ES Modules import
- * // const { LightsailClient, CreateInstanceSnapshotCommand } = require("@aws-sdk/client-lightsail"); // CommonJS import
- * const client = new LightsailClient(config);
- * const command = new CreateInstanceSnapshotCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link CreateInstanceSnapshotCommandInput} for command's `input` shape.
- * @see {@link CreateInstanceSnapshotCommandOutput} for command's `response` shape.
- * @see {@link LightsailClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class CreateInstanceSnapshotCommand extends $Command<
-  CreateInstanceSnapshotCommandInput,
-  CreateInstanceSnapshotCommandOutput,
-  LightsailClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: CreateInstanceSnapshotCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: LightsailClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<CreateInstanceSnapshotCommandInput, CreateInstanceSnapshotCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "LightsailClient";
-    const commandName = "CreateInstanceSnapshotCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: CreateInstanceSnapshotRequest.filterSensitiveLog,
-      outputFilterSensitiveLog: CreateInstanceSnapshotResult.filterSensitiveLog,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: CreateInstanceSnapshotCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_1CreateInstanceSnapshotCommand(input, context);
-  }
-
-  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<CreateInstanceSnapshotCommandOutput> {
-    return deserializeAws_json1_1CreateInstanceSnapshotCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}

package/src/commands/CreateInstancesCommand.ts

@@ -1,97 +0,0 @@
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  MiddlewareStack,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-import { LightsailClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../LightsailClient";
-import { CreateInstancesRequest, CreateInstancesResult } from "../models/models_0";
-import {
-  deserializeAws_json1_1CreateInstancesCommand,
-  serializeAws_json1_1CreateInstancesCommand,
-} from "../protocols/Aws_json1_1";
-
-export interface CreateInstancesCommandInput extends CreateInstancesRequest {}
-export interface CreateInstancesCommandOutput extends CreateInstancesResult, __MetadataBearer {}
-
-/**
- * <p>Creates one or more Amazon Lightsail instances.</p>
- *          <p>The <code>create instances</code> operation supports tag-based access control via request
- *       tags. For more information, see the <a href="https://lightsail.aws.amazon.com/ls/docs/en_us/articles/amazon-lightsail-controlling-access-using-tags">Lightsail Developer Guide</a>.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { LightsailClient, CreateInstancesCommand } from "@aws-sdk/client-lightsail"; // ES Modules import
- * // const { LightsailClient, CreateInstancesCommand } = require("@aws-sdk/client-lightsail"); // CommonJS import
- * const client = new LightsailClient(config);
- * const command = new CreateInstancesCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link CreateInstancesCommandInput} for command's `input` shape.
- * @see {@link CreateInstancesCommandOutput} for command's `response` shape.
- * @see {@link LightsailClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class CreateInstancesCommand extends $Command<
-  CreateInstancesCommandInput,
-  CreateInstancesCommandOutput,
-  LightsailClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: CreateInstancesCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: LightsailClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<CreateInstancesCommandInput, CreateInstancesCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "LightsailClient";
-    const commandName = "CreateInstancesCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: CreateInstancesRequest.filterSensitiveLog,
-      outputFilterSensitiveLog: CreateInstancesResult.filterSensitiveLog,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: CreateInstancesCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_1CreateInstancesCommand(input, context);
-  }
-
-  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<CreateInstancesCommandOutput> {
-    return deserializeAws_json1_1CreateInstancesCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}