@aws-sdk/client-iot-wireless 3.772.0 → 3.774.0

package/README.md

@@ -9,7 +9,7 @@ AWS SDK for JavaScript IoTWireless Client for Node.js, Browser and React Native.
 <p>AWS IoT Wireless provides bi-directional communication between internet-connected
 wireless devices and the AWS Cloud. To onboard both LoRaWAN and Sidewalk devices to AWS
 IoT, use the IoT Wireless API. These wireless devices use the Low Power Wide Area
-Networking (LPWAN) communication protocol to communicate with AWS IoT.</p>
+Networking (LPWAN) communication protocol to communicate with AWS IoT. </p>
 <p>Using the API, you can perform create, read, update, and delete operations for your
 wireless devices, gateways, destinations, and profiles. After onboarding your devices,
 you can use the API operations to set log levels and monitor your devices with
@@ -20,8 +20,11 @@ Firmware Updates Over-The-Air (FUOTA) API operations, you can create a FUOTA tas
 schedule a session to update the firmware of individual devices or an entire group of
 devices in a multicast group.</p>
 <p>To connect to the AWS IoT Wireless Service, use the Service endpoints as described in
-<a href="https://docs.aws.amazon.com/general/latest/gr/iot-lorawan.html#iot-wireless_region">IoT Wireless Service
-endpoints</a> in the <i>AWS General Reference</i>.</p>
+<a href="https://docs.aws.amazon.com/general/latest/gr/iot-lorawan.html#iot-wireless_region">IoT
+Wireless Service endpoints</a>. You can use both IPv4 and IPv6 protocols to connect
+to the endpoints and send requests to the AWS IoT Wireless service. For more information,
+see <a href="https://docs.aws.amazon.com/iot-wireless/latest/developerguide/wireless-ipv6-access.html">Using
+IPv6 with AWS IoT Wireless</a>.</p>
 
 ## Installing
 

package/dist-types/IoTWireless.d.ts

@@ -814,7 +814,7 @@ export interface IoTWireless {
  * <p>AWS IoT Wireless provides bi-directional communication between internet-connected
  *             wireless devices and the AWS Cloud. To onboard both LoRaWAN and Sidewalk devices to AWS
  *             IoT, use the IoT Wireless API. These wireless devices use the Low Power Wide Area
- *             Networking (LPWAN) communication protocol to communicate with AWS IoT.</p>
+ *             Networking (LPWAN) communication protocol to communicate with AWS IoT. </p>
  *          <p>Using the API, you can perform create, read, update, and delete operations for your
  *             wireless devices, gateways, destinations, and profiles. After onboarding your devices,
  *             you can use the API operations to set log levels and monitor your devices with
@@ -825,8 +825,11 @@ export interface IoTWireless {
  *             schedule a session to update the firmware of individual devices or an entire group of
  *             devices in a multicast group.</p>
  *          <p>To connect to the AWS IoT Wireless Service, use the Service endpoints as described in
- *                 <a href="https://docs.aws.amazon.com/general/latest/gr/iot-lorawan.html#iot-wireless_region">IoT Wireless Service
- *                 endpoints</a> in the <i>AWS General Reference</i>.</p>
+ *             <a href="https://docs.aws.amazon.com/general/latest/gr/iot-lorawan.html#iot-wireless_region">IoT
+ *             Wireless Service endpoints</a>. You can use both IPv4 and IPv6 protocols to connect
+ *             to the endpoints and send requests to the AWS IoT Wireless service. For more information,
+ *             see <a href="https://docs.aws.amazon.com/iot-wireless/latest/developerguide/wireless-ipv6-access.html">Using
+ * 			IPv6 with AWS IoT Wireless</a>.</p>
  * @public
  */
 export declare class IoTWireless extends IoTWirelessClient implements IoTWireless {

package/dist-types/IoTWirelessClient.d.ts

@@ -284,7 +284,7 @@ export interface IoTWirelessClientResolvedConfig extends IoTWirelessClientResolv
  * <p>AWS IoT Wireless provides bi-directional communication between internet-connected
  *             wireless devices and the AWS Cloud. To onboard both LoRaWAN and Sidewalk devices to AWS
  *             IoT, use the IoT Wireless API. These wireless devices use the Low Power Wide Area
- *             Networking (LPWAN) communication protocol to communicate with AWS IoT.</p>
+ *             Networking (LPWAN) communication protocol to communicate with AWS IoT. </p>
  *          <p>Using the API, you can perform create, read, update, and delete operations for your
  *             wireless devices, gateways, destinations, and profiles. After onboarding your devices,
  *             you can use the API operations to set log levels and monitor your devices with
@@ -295,8 +295,11 @@ export interface IoTWirelessClientResolvedConfig extends IoTWirelessClientResolv
  *             schedule a session to update the firmware of individual devices or an entire group of
  *             devices in a multicast group.</p>
  *          <p>To connect to the AWS IoT Wireless Service, use the Service endpoints as described in
- *                 <a href="https://docs.aws.amazon.com/general/latest/gr/iot-lorawan.html#iot-wireless_region">IoT Wireless Service
- *                 endpoints</a> in the <i>AWS General Reference</i>.</p>
+ *             <a href="https://docs.aws.amazon.com/general/latest/gr/iot-lorawan.html#iot-wireless_region">IoT
+ *             Wireless Service endpoints</a>. You can use both IPv4 and IPv6 protocols to connect
+ *             to the endpoints and send requests to the AWS IoT Wireless service. For more information,
+ *             see <a href="https://docs.aws.amazon.com/iot-wireless/latest/developerguide/wireless-ipv6-access.html">Using
+ * 			IPv6 with AWS IoT Wireless</a>.</p>
  * @public
  */
 export declare class IoTWirelessClient extends __Client<__HttpHandlerOptions, ServiceInputTypes, ServiceOutputTypes, IoTWirelessClientResolvedConfig> {

package/dist-types/commands/CreateWirelessGatewayCommand.d.ts

@@ -29,19 +29,19 @@ declare const CreateWirelessGatewayCommand_base: {
 /**
  * <p>Provisions a wireless gateway.</p>
  *          <note>
- *             <p>When provisioning a wireless gateway, you might run into duplication errors
- *             for the following reasons.</p>
+ *             <p>When provisioning a wireless gateway, you might run into duplication errors for
+ *                 the following reasons.</p>
  *             <ul>
  *                <li>
  *                   <p>If you specify a <code>GatewayEui</code> value that already exists.</p>
  *                </li>
  *                <li>
  *                   <p>If you used a <code>ClientRequestToken</code> with the same parameters
- *                     within the last 10 minutes.</p>
+ *                         within the last 10 minutes.</p>
  *                </li>
  *             </ul>
- *             <p>To avoid this error, make sure that you use unique identifiers and parameters
- *                 for each request within the specified time period.</p>
+ *             <p>To avoid this error, make sure that you use unique identifiers and parameters for
+ *                 each request within the specified time period.</p>
  *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

package/dist-types/commands/DeleteMulticastGroupCommand.d.ts

@@ -27,7 +27,7 @@ declare const DeleteMulticastGroupCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Deletes a multicast group if it is not in use by a fuota task.</p>
+ * <p>Deletes a multicast group if it is not in use by a FUOTA task.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DeleteWirelessGatewayCommand.d.ts

@@ -24,24 +24,24 @@ export interface DeleteWirelessGatewayCommandOutput extends DeleteWirelessGatewa
 declare const DeleteWirelessGatewayCommand_base: {
     new (input: DeleteWirelessGatewayCommandInput): import("@smithy/smithy-client").CommandImpl<DeleteWirelessGatewayCommandInput, DeleteWirelessGatewayCommandOutput, IoTWirelessClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes>;
     new (__0_0: DeleteWirelessGatewayCommandInput): import("@smithy/smithy-client").CommandImpl<DeleteWirelessGatewayCommandInput, DeleteWirelessGatewayCommandOutput, IoTWirelessClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes>;
-    getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
+    getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions; /** @internal type navigation helper, not in runtime. */
 };
 /**
  * <p>Deletes a wireless gateway.</p>
  *          <note>
- *             <p>When deleting a wireless gateway, you might run into duplication errors
- *             for the following reasons.</p>
+ *             <p>When deleting a wireless gateway, you might run into duplication errors for the
+ *                 following reasons.</p>
  *             <ul>
  *                <li>
  *                   <p>If you specify a <code>GatewayEui</code> value that already exists.</p>
  *                </li>
  *                <li>
  *                   <p>If you used a <code>ClientRequestToken</code> with the same parameters
- *                     within the last 10 minutes.</p>
+ *                         within the last 10 minutes.</p>
  *                </li>
  *             </ul>
- *             <p>To avoid this error, make sure that you use unique identifiers and parameters
- *                 for each request within the specified time period.</p>
+ *             <p>To avoid this error, make sure that you use unique identifiers and parameters for
+ *                 each request within the specified time period.</p>
  *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

package/dist-types/commands/DisassociateMulticastGroupFromFuotaTaskCommand.d.ts

@@ -27,7 +27,7 @@ declare const DisassociateMulticastGroupFromFuotaTaskCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Disassociates a multicast group from a fuota task.</p>
+ * <p>Disassociates a multicast group from a FUOTA task.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetLogLevelsByResourceTypesCommand.d.ts

@@ -27,9 +27,9 @@ declare const GetLogLevelsByResourceTypesCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Returns current default log levels or log levels by resource types. Based on resource
- *             types, log levels can be for wireless device log options or wireless gateway log
- *             options.</p>
+ * <p>Returns current default log levels or log levels by resource types. Based on the
+ *             resource type, log levels can be returned for wireless device, wireless gateway, or
+ *             FUOTA task log options.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetPositionEstimateCommand.d.ts

@@ -141,7 +141,7 @@ declare const GetPositionEstimateCommand_base: {
  *           { // LteNmrObj
  *             Pci: Number("int"), // required
  *             Earfcn: Number("int"), // required
- *             EutranCid: Number("int"), // required
+ *             EutranCid: Number("int"),
  *             Rsrp: Number("int"),
  *             Rsrq: Number("float"),
  *           },

package/dist-types/commands/GetResourceLogLevelCommand.d.ts

@@ -27,8 +27,8 @@ declare const GetResourceLogLevelCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Fetches the log-level override, if any, for a given resource-ID and resource-type. It
- *             can be used for a wireless device, wireless gateway or fuota task.</p>
+ * <p>Fetches the log-level override, if any, for a given resource ID and resource
+ *             type..</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/ListMulticastGroupsByFuotaTaskCommand.d.ts

@@ -27,7 +27,7 @@ declare const ListMulticastGroupsByFuotaTaskCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>List all multicast groups associated with a fuota task.</p>
+ * <p>List all multicast groups associated with a FUOTA task.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/PutResourceLogLevelCommand.d.ts

@@ -27,9 +27,8 @@ declare const PutResourceLogLevelCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Sets the log-level override for a resource-ID and resource-type. This option can be
- *             specified for a wireless gateway or a wireless device. A limit of 200 log level override
- *             can be set per account.</p>
+ * <p>Sets the log-level override for a resource ID and resource type. A limit of 200 log
+ *             level override can be set per account.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/ResetAllResourceLogLevelsCommand.d.ts

@@ -28,7 +28,7 @@ declare const ResetAllResourceLogLevelsCommand_base: {
 };
 /**
  * <p>Removes the log-level overrides for all resources; wireless devices, wireless
- *             gateways, and fuota tasks.</p>
+ *             gateways, and FUOTA tasks.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/ResetResourceLogLevelCommand.d.ts

@@ -27,8 +27,8 @@ declare const ResetResourceLogLevelCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Removes the log-level override, if any, for a specific resource-ID and resource-type.
- *             It can be used for a wireless device, a wireless gateway, or a fuota task.</p>
+ * <p>Removes the log-level override, if any, for a specific resource ID and resource type.
+ *             It can be used for a wireless device, a wireless gateway, or a FUOTA task.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/UpdateLogLevelsByResourceTypesCommand.d.ts

@@ -28,7 +28,7 @@ declare const UpdateLogLevelsByResourceTypesCommand_base: {
 };
 /**
  * <p>Set default log level, or log levels by resource types. This can be for wireless
- *             device log options or wireless gateways log options and is used to control the log
+ *             device, wireless gateway, or FUOTA task log options, and is used to control the log
  *             messages that'll be displayed in CloudWatch.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

package/dist-types/index.d.ts

@@ -2,7 +2,7 @@
  * <p>AWS IoT Wireless provides bi-directional communication between internet-connected
  *             wireless devices and the AWS Cloud. To onboard both LoRaWAN and Sidewalk devices to AWS
  *             IoT, use the IoT Wireless API. These wireless devices use the Low Power Wide Area
- *             Networking (LPWAN) communication protocol to communicate with AWS IoT.</p>
+ *             Networking (LPWAN) communication protocol to communicate with AWS IoT. </p>
  *          <p>Using the API, you can perform create, read, update, and delete operations for your
  *             wireless devices, gateways, destinations, and profiles. After onboarding your devices,
  *             you can use the API operations to set log levels and monitor your devices with
@@ -13,8 +13,11 @@
  *             schedule a session to update the firmware of individual devices or an entire group of
  *             devices in a multicast group.</p>
  *          <p>To connect to the AWS IoT Wireless Service, use the Service endpoints as described in
- *                 <a href="https://docs.aws.amazon.com/general/latest/gr/iot-lorawan.html#iot-wireless_region">IoT Wireless Service
- *                 endpoints</a> in the <i>AWS General Reference</i>.</p>
+ *             <a href="https://docs.aws.amazon.com/general/latest/gr/iot-lorawan.html#iot-wireless_region">IoT
+ *             Wireless Service endpoints</a>. You can use both IPv4 and IPv6 protocols to connect
+ *             to the endpoints and send requests to the AWS IoT Wireless service. For more information,
+ *             see <a href="https://docs.aws.amazon.com/iot-wireless/latest/developerguide/wireless-ipv6-access.html">Using
+ * 			IPv6 with AWS IoT Wireless</a>.</p>
  *
  * @packageDocumentation
  */

package/dist-types/models/models_0.d.ts

@@ -207,12 +207,14 @@ export interface AssociateAwsAccountWithPartnerAccountRequest {
      */
     Sidewalk: SidewalkAccountInfo | undefined;
     /**
-     * <p>Each resource must have a unique client request token. The client token is used to implement
-     *             idempotency. It ensures that the request completes no more than one time. If you retry a request
-     *             with the same token and the same parameters, the request will complete successfully. However, if
-     *             you try to create a new resource using the same token but different parameters, an HTTP 409
-     *             conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request.
-     *             For more information about idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon EC2 API requests</a>.</p>
+     * <p>Each resource must have a unique client request token. The client token is used to
+     *             implement idempotency. It ensures that the request completes no more than one time. If
+     *             you retry a request with the same token and the same parameters, the request will
+     *             complete successfully. However, if you try to create a new resource using the same token
+     *             but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs
+     *             will automatically generate a unique client request. For more information about
+     *             idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon
+     *                 EC2 API requests</a>.</p>
      * @public
      */
     ClientRequestToken?: string | undefined;
@@ -734,7 +736,7 @@ export interface LteNmrObj {
      *             (EUTRANCID).</p>
      * @public
      */
-    EutranCid: number | undefined;
+    EutranCid?: number | undefined;
     /**
      * <p>Signal power of the reference signal received, measured in dBm
      *             (decibel-milliwatts).</p>
@@ -1190,12 +1192,14 @@ export interface CreateDestinationRequest {
      */
     Tags?: Tag[] | undefined;
     /**
-     * <p>Each resource must have a unique client request token. The client token is used to implement
-     *             idempotency. It ensures that the request completes no more than one time. If you retry a request
-     *             with the same token and the same parameters, the request will complete successfully. However, if
-     *             you try to create a new resource using the same token but different parameters, an HTTP 409
-     *             conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request.
-     *             For more information about idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon EC2 API requests</a>.</p>
+     * <p>Each resource must have a unique client request token. The client token is used to
+     *             implement idempotency. It ensures that the request completes no more than one time. If
+     *             you retry a request with the same token and the same parameters, the request will
+     *             complete successfully. However, if you try to create a new resource using the same token
+     *             but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs
+     *             will automatically generate a unique client request. For more information about
+     *             idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon
+     *                 EC2 API requests</a>.</p>
      * @public
      */
     ClientRequestToken?: string | undefined;
@@ -1344,12 +1348,14 @@ export interface CreateDeviceProfileRequest {
      */
     Tags?: Tag[] | undefined;
     /**
-     * <p>Each resource must have a unique client request token. The client token is used to implement
-     *             idempotency. It ensures that the request completes no more than one time. If you retry a request
-     *             with the same token and the same parameters, the request will complete successfully. However, if
-     *             you try to create a new resource using the same token but different parameters, an HTTP 409
-     *             conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request.
-     *             For more information about idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon EC2 API requests</a>.</p>
+     * <p>Each resource must have a unique client request token. The client token is used to
+     *             implement idempotency. It ensures that the request completes no more than one time. If
+     *             you retry a request with the same token and the same parameters, the request will
+     *             complete successfully. However, if you try to create a new resource using the same token
+     *             but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs
+     *             will automatically generate a unique client request. For more information about
+     *             idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon
+     *                 EC2 API requests</a>.</p>
      * @public
      */
     ClientRequestToken?: string | undefined;
@@ -1423,12 +1429,14 @@ export interface CreateFuotaTaskRequest {
      */
     Description?: string | undefined;
     /**
-     * <p>Each resource must have a unique client request token. The client token is used to implement
-     *             idempotency. It ensures that the request completes no more than one time. If you retry a request
-     *             with the same token and the same parameters, the request will complete successfully. However, if
-     *             you try to create a new resource using the same token but different parameters, an HTTP 409
-     *             conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request.
-     *             For more information about idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon EC2 API requests</a>.</p>
+     * <p>Each resource must have a unique client request token. The client token is used to
+     *             implement idempotency. It ensures that the request completes no more than one time. If
+     *             you retry a request with the same token and the same parameters, the request will
+     *             complete successfully. However, if you try to create a new resource using the same token
+     *             but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs
+     *             will automatically generate a unique client request. For more information about
+     *             idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon
+     *                 EC2 API requests</a>.</p>
      * @public
      */
     ClientRequestToken?: string | undefined;
@@ -1481,8 +1489,8 @@ export interface CreateFuotaTaskRequest {
      */
     FragmentIntervalMS?: number | undefined;
     /**
-     * <p>The Descriptor specifies some metadata about the File being transferred using FUOTA e.g. the software version.
-     *             It is sent transparently to the device. It is a binary field encoded in base64</p>
+     * <p>The descriptor is the metadata about the file that is transferred to the device using
+     *             FUOTA, such as the software version. It is a binary field encoded in base64.</p>
      * @public
      */
     Descriptor?: string | undefined;
@@ -1515,22 +1523,23 @@ export declare const DlClass: {
  */
 export type DlClass = (typeof DlClass)[keyof typeof DlClass];
 /**
- * <p>Specify the list of gateways to which you want to send the multicast downlink messages.
- *             The multicast message will be sent to each gateway in the sequence provided in the list.</p>
+ * <p>Specify the list of gateways to which you want to send the multicast downlink
+ *             messages. The multicast message will be sent to each gateway in the list, with the
+ *             transmission interval as the time interval between each message.</p>
  * @public
  */
 export interface ParticipatingGatewaysMulticast {
     /**
-     * <p>The list of gateways that you want to use for sending the multicast downlink. Each downlink will be
-     *             sent to all the gateways in the list with transmission interval between them. If list is empty the gateway
-     *             list will be dynamically selected similar to the case of no ParticipatingGateways
-     *         </p>
+     * <p>The list of gateways that you want to use for sending the multicast downlink message.
+     *             Each downlink message will be sent to all the gateways in the list in the order that you
+     *             provided. If the gateway list is empty, then AWS IoT Core for LoRaWAN chooses the
+     *             gateways that were most recently used by the devices to send an uplink message.</p>
      * @public
      */
     GatewayList?: string[] | undefined;
     /**
-     * <p>The duration of time for which AWS IoT Core for LoRaWAN will wait before transmitting
-     *             the multicast payload to the next gateway in the list.</p>
+     * <p>The duration of time in milliseconds for which AWS IoT Core for LoRaWAN will wait
+     *             before transmitting the multicast payload to the next gateway in the list.</p>
      * @public
      */
     TransmissionInterval?: number | undefined;
@@ -1551,8 +1560,9 @@ export interface LoRaWANMulticast {
      */
     DlClass?: DlClass | undefined;
     /**
-     * <p>Specify the list of gateways to which you want to send the multicast downlink messages.
-     *             The multicast message will be sent to each gateway in the sequence provided in the list.</p>
+     * <p>Specify the list of gateways to which you want to send the multicast downlink
+     *             messages. The multicast message will be sent to each gateway in the list, with the
+     *             transmission interval as the time interval between each message.</p>
      * @public
      */
     ParticipatingGateways?: ParticipatingGatewaysMulticast | undefined;
@@ -1572,12 +1582,14 @@ export interface CreateMulticastGroupRequest {
      */
     Description?: string | undefined;
     /**
-     * <p>Each resource must have a unique client request token. The client token is used to implement
-     *             idempotency. It ensures that the request completes no more than one time. If you retry a request
-     *             with the same token and the same parameters, the request will complete successfully. However, if
-     *             you try to create a new resource using the same token but different parameters, an HTTP 409
-     *             conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request.
-     *             For more information about idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon EC2 API requests</a>.</p>
+     * <p>Each resource must have a unique client request token. The client token is used to
+     *             implement idempotency. It ensures that the request completes no more than one time. If
+     *             you retry a request with the same token and the same parameters, the request will
+     *             complete successfully. However, if you try to create a new resource using the same token
+     *             but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs
+     *             will automatically generate a unique client request. For more information about
+     *             idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon
+     *                 EC2 API requests</a>.</p>
      * @public
      */
     ClientRequestToken?: string | undefined;
@@ -1712,12 +1724,14 @@ export interface CreateNetworkAnalyzerConfigurationRequest {
      */
     Tags?: Tag[] | undefined;
     /**
-     * <p>Each resource must have a unique client request token. The client token is used to implement
-     *             idempotency. It ensures that the request completes no more than one time. If you retry a request
-     *             with the same token and the same parameters, the request will complete successfully. However, if
-     *             you try to create a new resource using the same token but different parameters, an HTTP 409
-     *             conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request.
-     *             For more information about idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon EC2 API requests</a>.</p>
+     * <p>Each resource must have a unique client request token. The client token is used to
+     *             implement idempotency. It ensures that the request completes no more than one time. If
+     *             you retry a request with the same token and the same parameters, the request will
+     *             complete successfully. However, if you try to create a new resource using the same token
+     *             but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs
+     *             will automatically generate a unique client request. For more information about
+     *             idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon
+     *                 EC2 API requests</a>.</p>
      * @public
      */
     ClientRequestToken?: string | undefined;
@@ -1795,12 +1809,14 @@ export interface CreateServiceProfileRequest {
      */
     Tags?: Tag[] | undefined;
     /**
-     * <p>Each resource must have a unique client request token. The client token is used to implement
-     *             idempotency. It ensures that the request completes no more than one time. If you retry a request
-     *             with the same token and the same parameters, the request will complete successfully. However, if
-     *             you try to create a new resource using the same token but different parameters, an HTTP 409
-     *             conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request.
-     *             For more information about idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon EC2 API requests</a>.</p>
+     * <p>Each resource must have a unique client request token. The client token is used to
+     *             implement idempotency. It ensures that the request completes no more than one time. If
+     *             you retry a request with the same token and the same parameters, the request will
+     *             complete successfully. However, if you try to create a new resource using the same token
+     *             but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs
+     *             will automatically generate a unique client request. For more information about
+     *             idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon
+     *                 EC2 API requests</a>.</p>
      * @public
      */
     ClientRequestToken?: string | undefined;
@@ -2028,12 +2044,14 @@ export interface CreateWirelessDeviceRequest {
      */
     DestinationName: string | undefined;
     /**
-     * <p>Each resource must have a unique client request token. The client token is used to implement
-     *             idempotency. It ensures that the request completes no more than one time. If you retry a request
-     *             with the same token and the same parameters, the request will complete successfully. However, if
-     *             you try to create a new resource using the same token but different parameters, an HTTP 409
-     *             conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request.
-     *             For more information about idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon EC2 API requests</a>.</p>
+     * <p>Each resource must have a unique client request token. The client token is used to
+     *             implement idempotency. It ensures that the request completes no more than one time. If
+     *             you retry a request with the same token and the same parameters, the request will
+     *             complete successfully. However, if you try to create a new resource using the same token
+     *             but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs
+     *             will automatically generate a unique client request. For more information about
+     *             idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon
+     *                 EC2 API requests</a>.</p>
      * @public
      */
     ClientRequestToken?: string | undefined;
@@ -2144,12 +2162,14 @@ export interface CreateWirelessGatewayRequest {
      */
     Tags?: Tag[] | undefined;
     /**
-     * <p>Each resource must have a unique client request token. The client token is used to implement
-     *             idempotency. It ensures that the request completes no more than one time. If you retry a request
-     *             with the same token and the same parameters, the request will complete successfully. However, if
-     *             you try to create a new resource using the same token but different parameters, an HTTP 409
-     *             conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request.
-     *             For more information about idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon EC2 API requests</a>.</p>
+     * <p>Each resource must have a unique client request token. The client token is used to
+     *             implement idempotency. It ensures that the request completes no more than one time. If
+     *             you retry a request with the same token and the same parameters, the request will
+     *             complete successfully. However, if you try to create a new resource using the same token
+     *             but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs
+     *             will automatically generate a unique client request. For more information about
+     *             idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon
+     *                 EC2 API requests</a>.</p>
      * @public
      */
     ClientRequestToken?: string | undefined;
@@ -2305,12 +2325,14 @@ export interface CreateWirelessGatewayTaskDefinitionRequest {
      */
     Update?: UpdateWirelessGatewayTaskCreate | undefined;
     /**
-     * <p>Each resource must have a unique client request token. The client token is used to implement
-     *             idempotency. It ensures that the request completes no more than one time. If you retry a request
-     *             with the same token and the same parameters, the request will complete successfully. However, if
-     *             you try to create a new resource using the same token but different parameters, an HTTP 409
-     *             conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request.
-     *             For more information about idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon EC2 API requests</a>.</p>
+     * <p>Each resource must have a unique client request token. The client token is used to
+     *             implement idempotency. It ensures that the request completes no more than one time. If
+     *             you retry a request with the same token and the same parameters, the request will
+     *             complete successfully. However, if you try to create a new resource using the same token
+     *             but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs
+     *             will automatically generate a unique client request. For more information about
+     *             idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon
+     *                 EC2 API requests</a>.</p>
      * @public
      */
     ClientRequestToken?: string | undefined;
@@ -3225,13 +3247,14 @@ export declare const FuotaTaskEvent: {
 export type FuotaTaskEvent = (typeof FuotaTaskEvent)[keyof typeof FuotaTaskEvent];
 /**
  * <p>The log options for a FUOTA task event and can be used to set log levels for a
- *             specific fuota task event.</p>
- *          <p>For a LoRaWAN FuotaTask type, possible event for a log message is <code>Fuota</code>.</p>
+ *             specific FUOTA task event.</p>
+ *          <p>For a LoRaWAN FUOTA task, the only possible event for a log message is
+ *                 <code>Fuota</code>.</p>
  * @public
  */
 export interface FuotaTaskEventLogOption {
     /**
-     * <p>The event for a log message, if the log message is tied to a fuota task.</p>
+     * <p>The event for a log message, if the log message is tied to a FUOTA task.</p>
      * @public
      */
     Event: FuotaTaskEvent | undefined;
@@ -3255,13 +3278,13 @@ export declare const FuotaTaskType: {
  */
 export type FuotaTaskType = (typeof FuotaTaskType)[keyof typeof FuotaTaskType];
 /**
- * <p>The log options for fuota tasks and can be used to set log levels for a specific
- *             type of fuota task.</p>
+ * <p>The log options for FUOTA tasks and can be used to set log levels for a specific type
+ *             of FUOTA task.</p>
  * @public
  */
 export interface FuotaTaskLogOption {
     /**
-     * <p>The fuota task type.</p>
+     * <p>The FUOTA task type.</p>
      * @public
      */
     Type: FuotaTaskType | undefined;
@@ -3586,8 +3609,8 @@ export interface GetFuotaTaskResponse {
      */
     FragmentIntervalMS?: number | undefined;
     /**
-     * <p>The Descriptor specifies some metadata about the File being transferred using FUOTA e.g. the software version.
-     *             It is sent transparently to the device. It is a binary field encoded in base64</p>
+     * <p>The descriptor is the metadata about the file that is transferred to the device using
+     *             FUOTA, such as the software version. It is a binary field encoded in base64.</p>
      * @public
      */
     Descriptor?: string | undefined;
@@ -3749,7 +3772,7 @@ export interface GetLogLevelsByResourceTypesResponse {
      */
     WirelessDeviceLogOptions?: WirelessDeviceLogOption[] | undefined;
     /**
-     * <p>The list of fuota task log options.</p>
+     * <p>The list of FUOTA task log options.</p>
      * @public
      */
     FuotaTaskLogOptions?: FuotaTaskLogOption[] | undefined;
@@ -4042,8 +4065,9 @@ export interface LoRaWANMulticastGet {
      */
     NumberOfDevicesInGroup?: number | undefined;
     /**
-     * <p>Specify the list of gateways to which you want to send the multicast downlink messages.
-     *             The multicast message will be sent to each gateway in the sequence provided in the list.</p>
+     * <p>Specify the list of gateways to which you want to send the multicast downlink
+     *             messages. The multicast message will be sent to each gateway in the list, with the
+     *             transmission interval as the time interval between each message.</p>
      * @public
      */
     ParticipatingGateways?: ParticipatingGatewaysMulticast | undefined;
@@ -4601,14 +4625,14 @@ export interface GetResourceEventConfigurationResponse {
  */
 export interface GetResourceLogLevelRequest {
     /**
-     * <p>The identifier of the resource. For a Wireless Device, it is the wireless device ID.
-     *             For a wireless gateway, it is the wireless gateway ID.</p>
+     * <p>The unique identifier of the resource, which can be the wireless gateway ID, the
+     *             wireless device ID, or the FUOTA task ID.</p>
      * @public
      */
     ResourceIdentifier: string | undefined;
     /**
-     * <p>The type of the resource, which can be <code>WirelessDevice</code>,
-     *                 <code>WirelessGateway</code> or <code>FuotaTask</code>.</p>
+     * <p>The type of resource, which can be <code>WirelessDevice</code>,
+     *                 <code>WirelessGateway</code>, or <code>FuotaTask</code>.</p>
      * @public
      */
     ResourceType: string | undefined;
@@ -4674,7 +4698,7 @@ export interface GetServiceEndpointRequest {
     /**
      * <p>The service type for which to get endpoint information about. Can be <code>CUPS</code>
      *             for the Configuration and Update Server endpoint, or <code>LNS</code> for the LoRaWAN
-     *             Network Server endpoint or <code>CLAIM</code> for the global endpoint.</p>
+     *             Network Server endpoint.</p>
      * @public
      */
     ServiceType?: WirelessGatewayServiceType | undefined;

package/dist-types/models/models_1.d.ts

@@ -759,13 +759,13 @@ export interface PutPositionConfigurationResponse {
  */
 export interface PutResourceLogLevelRequest {
     /**
-     * <p>The identifier of the resource. For a Wireless Device, it is the wireless device ID.
-     *             For a wireless gateway, it is the wireless gateway ID.</p>
+     * <p>The unique identifier of the resource, which can be the wireless gateway ID, the
+     *             wireless device ID, or the FUOTA task ID.</p>
      * @public
      */
     ResourceIdentifier: string | undefined;
     /**
-     * <p>The type of the resource, which can be <code>WirelessDevice</code>,
+     * <p>The type of resource, which can be <code>WirelessDevice</code>,
      *                 <code>WirelessGateway</code>, or <code>FuotaTask</code>.</p>
      * @public
      */
@@ -798,13 +798,13 @@ export interface ResetAllResourceLogLevelsResponse {
  */
 export interface ResetResourceLogLevelRequest {
     /**
-     * <p>The identifier of the resource. For a Wireless Device, it is the wireless device ID.
-     *             For a wireless gateway, it is the wireless gateway ID.</p>
+     * <p>The unique identifier of the resource, which can be the wireless gateway ID, the
+     *             wireless device ID, or the FUOTA task ID.</p>
      * @public
      */
     ResourceIdentifier: string | undefined;
     /**
-     * <p>The type of the resource, which can be <code>WirelessDevice</code>,
+     * <p>The type of resource, which can be <code>WirelessDevice</code>,
      *                 <code>WirelessGateway</code>, or <code>FuotaTask</code>.</p>
      * @public
      */
@@ -1083,12 +1083,14 @@ export interface StartSingleWirelessDeviceImportTaskRequest {
      */
     DestinationName: string | undefined;
     /**
-     * <p>Each resource must have a unique client request token. The client token is used to implement
-     *             idempotency. It ensures that the request completes no more than one time. If you retry a request
-     *             with the same token and the same parameters, the request will complete successfully. However, if
-     *             you try to create a new resource using the same token but different parameters, an HTTP 409
-     *             conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request.
-     *             For more information about idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon EC2 API requests</a>.</p>
+     * <p>Each resource must have a unique client request token. The client token is used to
+     *             implement idempotency. It ensures that the request completes no more than one time. If
+     *             you retry a request with the same token and the same parameters, the request will
+     *             complete successfully. However, if you try to create a new resource using the same token
+     *             but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs
+     *             will automatically generate a unique client request. For more information about
+     *             idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon
+     *                 EC2 API requests</a>.</p>
      * @public
      */
     ClientRequestToken?: string | undefined;
@@ -1153,12 +1155,14 @@ export interface StartWirelessDeviceImportTaskRequest {
      */
     DestinationName: string | undefined;
     /**
-     * <p>Each resource must have a unique client request token. The client token is used to implement
-     *             idempotency. It ensures that the request completes no more than one time. If you retry a request
-     *             with the same token and the same parameters, the request will complete successfully. However, if
-     *             you try to create a new resource using the same token but different parameters, an HTTP 409
-     *             conflict occurs. If you omit this value, AWS SDKs will automatically generate a unique client request.
-     *             For more information about idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon EC2 API requests</a>.</p>
+     * <p>Each resource must have a unique client request token. The client token is used to
+     *             implement idempotency. It ensures that the request completes no more than one time. If
+     *             you retry a request with the same token and the same parameters, the request will
+     *             complete successfully. However, if you try to create a new resource using the same token
+     *             but different parameters, an HTTP 409 conflict occurs. If you omit this value, AWS SDKs
+     *             will automatically generate a unique client request. For more information about
+     *             idempotency, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency in Amazon
+     *                 EC2 API requests</a>.</p>
      * @public
      */
     ClientRequestToken?: string | undefined;
@@ -1406,8 +1410,8 @@ export interface UpdateFuotaTaskRequest {
      */
     FragmentIntervalMS?: number | undefined;
     /**
-     * <p>The Descriptor specifies some metadata about the File being transferred using FUOTA e.g. the software version.
-     *             It is sent transparently to the device. It is a binary field encoded in base64</p>
+     * <p>The descriptor is the metadata about the file that is transferred to the device using
+     *             FUOTA, such as the software version. It is a binary field encoded in base64.</p>
      * @public
      */
     Descriptor?: string | undefined;
@@ -1429,7 +1433,7 @@ export interface UpdateLogLevelsByResourceTypesRequest {
      */
     DefaultLogLevel?: LogLevel | undefined;
     /**
-     * <p>The list of fuota task log options.</p>
+     * <p>The list of FUOTA task log options.</p>
      * @public
      */
     FuotaTaskLogOptions?: FuotaTaskLogOption[] | undefined;

package/dist-types/ts3.4/models/models_0.d.ts

@@ -206,7 +206,7 @@ export interface LteLocalId {
 export interface LteNmrObj {
   Pci: number | undefined;
   Earfcn: number | undefined;
-  EutranCid: number | undefined;
+  EutranCid?: number | undefined;
   Rsrp?: number | undefined;
   Rsrq?: number | undefined;
 }

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@aws-sdk/client-iot-wireless",
   "description": "AWS SDK for JavaScript Iot Wireless Client for Node.js, Browser and React Native",
-  "version": "3.772.0",
+  "version": "3.774.0",
   "scripts": {
     "build": "concurrently 'yarn:build:cjs' 'yarn:build:es' 'yarn:build:types'",
     "build:cjs": "node ../../scripts/compilation/inline client-iot-wireless",
@@ -20,17 +20,17 @@
   "dependencies": {
     "@aws-crypto/sha256-browser": "5.2.0",
     "@aws-crypto/sha256-js": "5.2.0",
-    "@aws-sdk/core": "3.758.0",
-    "@aws-sdk/credential-provider-node": "3.772.0",
-    "@aws-sdk/middleware-host-header": "3.734.0",
+    "@aws-sdk/core": "3.774.0",
+    "@aws-sdk/credential-provider-node": "3.774.0",
+    "@aws-sdk/middleware-host-header": "3.774.0",
     "@aws-sdk/middleware-logger": "3.734.0",
     "@aws-sdk/middleware-recursion-detection": "3.772.0",
-    "@aws-sdk/middleware-user-agent": "3.758.0",
+    "@aws-sdk/middleware-user-agent": "3.774.0",
     "@aws-sdk/region-config-resolver": "3.734.0",
     "@aws-sdk/types": "3.734.0",
     "@aws-sdk/util-endpoints": "3.743.0",
     "@aws-sdk/util-user-agent-browser": "3.734.0",
-    "@aws-sdk/util-user-agent-node": "3.758.0",
+    "@aws-sdk/util-user-agent-node": "3.774.0",
     "@smithy/config-resolver": "^4.0.1",
     "@smithy/core": "^3.1.5",
     "@smithy/fetch-http-handler": "^5.0.1",