@aws-sdk/client-global-accelerator 3.533.0 → 3.540.0

package/dist-types/models/models_0.d.ts

@@ -1,22 +1,22 @@
 import { ExceptionOptionType as __ExceptionOptionType } from "@smithy/smithy-client";
 import { GlobalAcceleratorServiceException as __BaseException } from "./GlobalAcceleratorServiceException";
 /**
- * @public
  * <p>A complex type that contains a <code>Timestamp</code> value and <code>Message</code> for changes
  * 			that you make to an accelerator in Global Accelerator. Messages stored here provide progress or error information when
  * 			you update an accelerator from IPv4 to dual-stack, or from dual-stack to IPv4. Global Accelerator stores a maximum
  * 			of ten event messages. </p>
+ * @public
  */
 export interface AcceleratorEvent {
     /**
-     * @public
      * <p>A string that contains an <code>Event</code> message describing changes or errors
      * 			when you update an accelerator in Global Accelerator from IPv4 to dual-stack, or dual-stack to IPv4.</p>
+     * @public
      */
     Message?: string;
     /**
-     * @public
      * <p>A timestamp for when you update an accelerator in Global Accelerator from IPv4 to dual-stack, or dual-stack to IPv4.</p>
+     * @public
      */
     Timestamp?: Date;
 }
@@ -45,25 +45,25 @@ export declare const IpAddressFamily: {
  */
 export type IpAddressFamily = (typeof IpAddressFamily)[keyof typeof IpAddressFamily];
 /**
- * @public
  * <p>A complex type for the set of IP addresses for an accelerator.</p>
+ * @public
  */
 export interface IpSet {
     /**
-     * @public
      * @deprecated
      *
      * <p>IpFamily is deprecated and has been replaced by IpAddressFamily.</p>
+     * @public
      */
     IpFamily?: string;
     /**
-     * @public
      * <p>The array of IP addresses in the IP address set. An IP address set can have a maximum of two IP addresses.</p>
+     * @public
      */
     IpAddresses?: string[];
     /**
-     * @public
      * <p>The types of IP addresses included in this IP set. </p>
+     * @public
      */
     IpAddressFamily?: IpAddressFamily;
 }
@@ -80,40 +80,39 @@ export declare const AcceleratorStatus: {
  */
 export type AcceleratorStatus = (typeof AcceleratorStatus)[keyof typeof AcceleratorStatus];
 /**
- * @public
  * <p>An accelerator is a complex type that includes one or more listeners that process inbound connections and then direct
  * 			traffic to one or more endpoint groups, each of which includes endpoints, such as load balancers.</p>
+ * @public
  */
 export interface Accelerator {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the accelerator.</p>
+     * @public
      */
     AcceleratorArn?: string;
     /**
-     * @public
      * <p>The name of the accelerator. The name must contain only alphanumeric characters or
      * 			hyphens (-), and must not begin or end with a hyphen.</p>
+     * @public
      */
     Name?: string;
     /**
-     * @public
      * <p>The IP address type that an accelerator supports. For a standard accelerator, the value can be IPV4 or DUAL_STACK.</p>
+     * @public
      */
     IpAddressType?: IpAddressType;
     /**
-     * @public
      * <p>Indicates whether the accelerator is enabled. The value is true or false. The default value is true. </p>
      *          <p>If the value is set to true, the accelerator cannot be deleted. If set to false, accelerator can be deleted.</p>
+     * @public
      */
     Enabled?: boolean;
     /**
-     * @public
      * <p>The static IP addresses that Global Accelerator associates with the accelerator.</p>
+     * @public
      */
     IpSets?: IpSet[];
     /**
-     * @public
      * <p>The Domain Name System (DNS) name that Global Accelerator creates that points to an accelerator's static IPv4 addresses.</p>
      *          <p>The naming convention for the DNS name for an accelerator is the following: A lowercase letter a,
      * 			followed by a 16-bit random hex string, followed by .awsglobalaccelerator.com. For example:
@@ -122,25 +121,25 @@ export interface Accelerator {
      *  			the A record and the AAAA record for all four static addresses for the accelerator: two IPv4 addresses and two IPv6 addresses.</p>
      *          <p>For more information about the default DNS name, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/dns-addressing-custom-domains.dns-addressing.html">
      * 			Support for DNS addressing in Global Accelerator</a> in the <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     DnsName?: string;
     /**
-     * @public
      * <p>Describes the deployment status of the accelerator.</p>
+     * @public
      */
     Status?: AcceleratorStatus;
     /**
-     * @public
      * <p>The date and time that the accelerator was created.</p>
+     * @public
      */
     CreatedTime?: Date;
     /**
-     * @public
      * <p>The date and time that the accelerator was last modified.</p>
+     * @public
      */
     LastModifiedTime?: Date;
     /**
-     * @public
      * <p>The Domain Name System (DNS) name that Global Accelerator creates that points to a dual-stack accelerator's four static IP addresses:
      * 			two IPv4 addresses and two IPv6 addresses.</p>
      *          <p>The naming convention for the dual-stack DNS name is the following: A lowercase letter a,
@@ -149,46 +148,47 @@ export interface Accelerator {
      *          <p>Note: Global Accelerator also assigns a default DNS name, <code>DnsName</code>, to your accelerator that points just to the static IPv4 addresses. </p>
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/about-accelerators.html#about-accelerators.dns-addressing">
      * 			Support for DNS addressing in Global Accelerator</a> in the <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     DualStackDnsName?: string;
     /**
-     * @public
      * <p>A history of changes that you make to an accelerator in Global Accelerator.</p>
+     * @public
      */
     Events?: AcceleratorEvent[];
 }
 /**
- * @public
  * <p>Attributes of an accelerator.</p>
+ * @public
  */
 export interface AcceleratorAttributes {
     /**
-     * @public
      * <p>Indicates whether flow logs are enabled. The default value is false. If the value is true,
      * 				<code>FlowLogsS3Bucket</code> and <code>FlowLogsS3Prefix</code> must be specified.</p>
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/monitoring-global-accelerator.flow-logs.html">Flow logs</a> in
      * 		    the <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     FlowLogsEnabled?: boolean;
     /**
-     * @public
      * <p>The name of the Amazon S3 bucket for the flow logs. Attribute is required if <code>FlowLogsEnabled</code> is
      * 		    <code>true</code>. The bucket must exist and have a bucket policy that grants Global Accelerator permission to write to the
      * 			bucket.</p>
+     * @public
      */
     FlowLogsS3Bucket?: string;
     /**
-     * @public
      * <p>The prefix for the location in the Amazon S3 bucket for the flow logs. Attribute is required if
      * 				<code>FlowLogsEnabled</code> is <code>true</code>.</p>
      *          <p>If you specify slash (/) for the S3 bucket prefix, the log file bucket folder structure will include a double slash (//), like the following:</p>
      *          <p>s3-bucket_name//AWSLogs/aws_account_id</p>
+     * @public
      */
     FlowLogsS3Prefix?: string;
 }
 /**
- * @public
  * <p>The accelerator that you specified could not be disabled.</p>
+ * @public
  */
 export declare class AcceleratorNotDisabledException extends __BaseException {
     readonly name: "AcceleratorNotDisabledException";
@@ -200,8 +200,8 @@ export declare class AcceleratorNotDisabledException extends __BaseException {
     constructor(opts: __ExceptionOptionType<AcceleratorNotDisabledException, __BaseException>);
 }
 /**
- * @public
  * <p>The accelerator that you specified doesn't exist.</p>
+ * @public
  */
 export declare class AcceleratorNotFoundException extends __BaseException {
     readonly name: "AcceleratorNotFoundException";
@@ -213,8 +213,8 @@ export declare class AcceleratorNotFoundException extends __BaseException {
     constructor(opts: __ExceptionOptionType<AcceleratorNotFoundException, __BaseException>);
 }
 /**
- * @public
  * <p>You don't have access permission.</p>
+ * @public
  */
 export declare class AccessDeniedException extends __BaseException {
     readonly name: "AccessDeniedException";
@@ -226,20 +226,20 @@ export declare class AccessDeniedException extends __BaseException {
     constructor(opts: __ExceptionOptionType<AccessDeniedException, __BaseException>);
 }
 /**
- * @public
  * <p>The list of endpoint objects. For custom routing, this is a list of virtual private cloud (VPC) subnet IDs.</p>
+ * @public
  */
 export interface CustomRoutingEndpointConfiguration {
     /**
-     * @public
      * <p>An ID for the endpoint. For custom routing accelerators, this is the virtual private cloud (VPC)
      * 			subnet ID. </p>
+     * @public
      */
     EndpointId?: string;
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the cross-account attachment that specifies the endpoints (resources)
      * 			that can be added to accelerators and principals that have permission to add the endpoints to accelerators.</p>
+     * @public
      */
     AttachmentArn?: string;
 }
@@ -248,26 +248,26 @@ export interface CustomRoutingEndpointConfiguration {
  */
 export interface AddCustomRoutingEndpointsRequest {
     /**
-     * @public
      * <p>The list of endpoint objects to add to a custom routing accelerator.</p>
+     * @public
      */
     EndpointConfigurations: CustomRoutingEndpointConfiguration[] | undefined;
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group for the custom routing endpoint.</p>
+     * @public
      */
     EndpointGroupArn: string | undefined;
 }
 /**
- * @public
  * <p>A complex type for an endpoint for a custom routing accelerator. Each endpoint group can include one or more endpoints,
  * 			which are virtual private cloud (VPC) subnets.</p>
+ * @public
  */
 export interface CustomRoutingEndpointDescription {
     /**
-     * @public
      * <p>An ID for the endpoint. For custom routing accelerators, this is the virtual private cloud (VPC)
      * 			subnet ID. </p>
+     * @public
      */
     EndpointId?: string;
 }
@@ -276,19 +276,19 @@ export interface CustomRoutingEndpointDescription {
  */
 export interface AddCustomRoutingEndpointsResponse {
     /**
-     * @public
      * <p>The endpoint objects added to the custom routing accelerator.</p>
+     * @public
      */
     EndpointDescriptions?: CustomRoutingEndpointDescription[];
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group for the custom routing endpoint.</p>
+     * @public
      */
     EndpointGroupArn?: string;
 }
 /**
- * @public
  * <p>You can't use both of those options.</p>
+ * @public
  */
 export declare class ConflictException extends __BaseException {
     readonly name: "ConflictException";
@@ -300,8 +300,8 @@ export declare class ConflictException extends __BaseException {
     constructor(opts: __ExceptionOptionType<ConflictException, __BaseException>);
 }
 /**
- * @public
  * <p>The endpoint that you specified doesn't exist.</p>
+ * @public
  */
 export declare class EndpointAlreadyExistsException extends __BaseException {
     readonly name: "EndpointAlreadyExistsException";
@@ -313,8 +313,8 @@ export declare class EndpointAlreadyExistsException extends __BaseException {
     constructor(opts: __ExceptionOptionType<EndpointAlreadyExistsException, __BaseException>);
 }
 /**
- * @public
  * <p>The endpoint group that you specified doesn't exist.</p>
+ * @public
  */
 export declare class EndpointGroupNotFoundException extends __BaseException {
     readonly name: "EndpointGroupNotFoundException";
@@ -326,8 +326,8 @@ export declare class EndpointGroupNotFoundException extends __BaseException {
     constructor(opts: __ExceptionOptionType<EndpointGroupNotFoundException, __BaseException>);
 }
 /**
- * @public
  * <p>There was an internal error for Global Accelerator.</p>
+ * @public
  */
 export declare class InternalServiceErrorException extends __BaseException {
     readonly name: "InternalServiceErrorException";
@@ -339,8 +339,8 @@ export declare class InternalServiceErrorException extends __BaseException {
     constructor(opts: __ExceptionOptionType<InternalServiceErrorException, __BaseException>);
 }
 /**
- * @public
  * <p>An argument that you specified is invalid.</p>
+ * @public
  */
 export declare class InvalidArgumentException extends __BaseException {
     readonly name: "InvalidArgumentException";
@@ -352,8 +352,8 @@ export declare class InvalidArgumentException extends __BaseException {
     constructor(opts: __ExceptionOptionType<InvalidArgumentException, __BaseException>);
 }
 /**
- * @public
  * <p>Processing your request would cause you to exceed an Global Accelerator limit.</p>
+ * @public
  */
 export declare class LimitExceededException extends __BaseException {
     readonly name: "LimitExceededException";
@@ -365,30 +365,29 @@ export declare class LimitExceededException extends __BaseException {
     constructor(opts: __ExceptionOptionType<LimitExceededException, __BaseException>);
 }
 /**
- * @public
  * <p>A complex type for endpoints. A resource must be valid and active when you add it as an endpoint.</p>
+ * @public
  */
 export interface EndpointConfiguration {
     /**
-     * @public
      * <p>An ID for the endpoint. If the endpoint is a Network Load Balancer or Application Load Balancer, this is the Amazon
      * 			Resource Name (ARN) of the resource. If the endpoint is an Elastic IP address, this is the Elastic IP address
      * 			allocation ID. For Amazon EC2 instances, this is the EC2 instance ID. A resource must be valid and active
      * 			when you add it as an endpoint.</p>
      *          <p>An Application Load Balancer can be either internal or internet-facing.</p>
+     * @public
      */
     EndpointId?: string;
     /**
-     * @public
      * <p>The weight associated with the endpoint. When you add weights to endpoints, you configure Global Accelerator to route traffic
      * 			based on proportions that you specify. For example, you might specify endpoint weights of 4, 5, 5, and 6 (sum=20). The
      * 			result is that 4/20 of your traffic, on average, is routed to the first endpoint, 5/20 is routed both to the second
      * 			and third endpoints, and 6/20 is routed to the last endpoint. For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/about-endpoints-endpoint-weights.html">Endpoint weights</a> in the
      * 	        <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     Weight?: number;
     /**
-     * @public
      * <p>Indicates whether client IP address preservation is enabled for an endpoint.
      * 			The value is true or false. The default value is true for Application Load Balancer endpoints. </p>
      *          <p>If the value is set to true, the client's IP address is preserved in the <code>X-Forwarded-For</code> request header as
@@ -398,12 +397,13 @@ export interface EndpointConfiguration {
      * 			with Network Load Balancers with TLS listeners.</p>
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/preserve-client-ip-address.html">
      * 			Preserve client IP addresses in Global Accelerator</a> in the <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     ClientIPPreservationEnabled?: boolean;
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the cross-account attachment that specifies the endpoints (resources)
      * 			that can be added to accelerators and principals that have permission to add the endpoints to accelerators.</p>
+     * @public
      */
     AttachmentArn?: string;
 }
@@ -412,13 +412,13 @@ export interface EndpointConfiguration {
  */
 export interface AddEndpointsRequest {
     /**
-     * @public
      * <p>The list of endpoint objects.</p>
+     * @public
      */
     EndpointConfigurations: EndpointConfiguration[] | undefined;
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group.</p>
+     * @public
      */
     EndpointGroupArn: string | undefined;
 }
@@ -436,40 +436,39 @@ export declare const HealthState: {
  */
 export type HealthState = (typeof HealthState)[keyof typeof HealthState];
 /**
- * @public
  * <p>A complex type for an endpoint. Each endpoint group can include one or more endpoints, such as load
  * 			balancers.</p>
+ * @public
  */
 export interface EndpointDescription {
     /**
-     * @public
      * <p>An ID for the endpoint. If the endpoint is a Network Load Balancer or Application Load Balancer, this is the Amazon
      * 			Resource Name (ARN) of the resource. If the endpoint is an Elastic IP address, this is the Elastic IP address
      * 			allocation ID. For Amazon EC2 instances, this is the EC2 instance ID. </p>
      *          <p>An Application Load Balancer can be either internal or internet-facing.</p>
+     * @public
      */
     EndpointId?: string;
     /**
-     * @public
      * <p>The weight associated with the endpoint. When you add weights to endpoints, you configure Global Accelerator to route traffic
      * 			based on proportions that you specify. For example, you might specify endpoint weights of 4, 5, 5, and 6 (sum=20). The
      * 			result is that 4/20 of your traffic, on average, is routed to the first endpoint, 5/20 is routed both to the second
      * 			and third endpoints, and 6/20 is routed to the last endpoint. For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/about-endpoints-endpoint-weights.html">Endpoint weights</a> in the
      * 	        <i>Global Accelerator Developer Guide</i>. </p>
+     * @public
      */
     Weight?: number;
     /**
-     * @public
      * <p>The health status of the endpoint.</p>
+     * @public
      */
     HealthState?: HealthState;
     /**
-     * @public
      * <p>Returns a null result.</p>
+     * @public
      */
     HealthReason?: string;
     /**
-     * @public
      * <p>Indicates whether client IP address preservation is enabled for an endpoint.
      * 			The value is true or false. The default value is true for Application Load Balancers endpoints. </p>
      *          <p>If the value is set to true, the client's IP address is preserved in the <code>X-Forwarded-For</code> request header as
@@ -479,6 +478,7 @@ export interface EndpointDescription {
      * 			with Network Load Balancers with TLS listeners.</p>
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/preserve-client-ip-address.html">
      * 			Preserve client IP addresses in Global Accelerator</a> in the <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     ClientIPPreservationEnabled?: boolean;
 }
@@ -487,19 +487,19 @@ export interface EndpointDescription {
  */
 export interface AddEndpointsResponse {
     /**
-     * @public
      * <p>The list of endpoint objects.</p>
+     * @public
      */
     EndpointDescriptions?: EndpointDescription[];
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group.</p>
+     * @public
      */
     EndpointGroupArn?: string;
 }
 /**
- * @public
  * <p>There's already a transaction in progress. Another transaction can't be processed.</p>
+ * @public
  */
 export declare class TransactionInProgressException extends __BaseException {
     readonly name: "TransactionInProgressException";
@@ -515,29 +515,29 @@ export declare class TransactionInProgressException extends __BaseException {
  */
 export interface AdvertiseByoipCidrRequest {
     /**
-     * @public
      * <p>The address range, in CIDR notation. This must be the exact range that you provisioned.
      * 			You can't advertise only a portion of the provisioned range.</p>
+     * @public
      */
     Cidr: string | undefined;
 }
 /**
- * @public
  * <p>A complex type that contains a <code>Message</code> and a <code>Timestamp</code> value for changes
  * 			that you make in the status of an IP address range that you bring to Global Accelerator through bring your own IP
  * 			address (BYOIP).</p>
+ * @public
  */
 export interface ByoipCidrEvent {
     /**
-     * @public
      * <p>A string that contains an <code>Event</code> message describing changes that you make in the status
      * 			of an IP address range that you bring to Global Accelerator through bring your own IP address (BYOIP).</p>
+     * @public
      */
     Message?: string;
     /**
-     * @public
      * <p>A timestamp for when you make a status change for an IP address range that you bring to Global Accelerator through
      * 			bring your own IP address (BYOIP).</p>
+     * @public
      */
     Timestamp?: Date;
 }
@@ -563,7 +563,6 @@ export declare const ByoipCidrState: {
  */
 export type ByoipCidrState = (typeof ByoipCidrState)[keyof typeof ByoipCidrState];
 /**
- * @public
  * <p>Information about an IP address range that is provisioned for use with your Amazon Web Services resources through
  * 			bring your own IP address (BYOIP).</p>
  *          <p>The following describes each BYOIP <code>State</code> that your IP address range can be in.</p>
@@ -634,22 +633,23 @@ export type ByoipCidrState = (typeof ByoipCidrState)[keyof typeof ByoipCidrState
  * 				a second time, contact Amazon Web Services support.</p>
  *             </li>
  *          </ul>
+ * @public
  */
 export interface ByoipCidr {
     /**
-     * @public
      * <p>The address range, in CIDR notation.</p>
+     * @public
      */
     Cidr?: string;
     /**
-     * @public
      * <p>The state of the address pool.</p>
+     * @public
      */
     State?: ByoipCidrState;
     /**
-     * @public
      * <p>A history of status changes for an IP address range that you bring to Global Accelerator
      * 			through bring your own IP address (BYOIP).</p>
+     * @public
      */
     Events?: ByoipCidrEvent[];
 }
@@ -658,14 +658,14 @@ export interface ByoipCidr {
  */
 export interface AdvertiseByoipCidrResponse {
     /**
-     * @public
      * <p>Information about the address range.</p>
+     * @public
      */
     ByoipCidr?: ByoipCidr;
 }
 /**
- * @public
  * <p>The CIDR that you specified was not found or is incorrect.</p>
+ * @public
  */
 export declare class ByoipCidrNotFoundException extends __BaseException {
     readonly name: "ByoipCidrNotFoundException";
@@ -677,9 +677,9 @@ export declare class ByoipCidrNotFoundException extends __BaseException {
     constructor(opts: __ExceptionOptionType<ByoipCidrNotFoundException, __BaseException>);
 }
 /**
- * @public
  * <p>The CIDR that you specified is not valid for this action. For example, the state of the CIDR might be
  * 		incorrect for this action.</p>
+ * @public
  */
 export declare class IncorrectCidrStateException extends __BaseException {
     readonly name: "IncorrectCidrStateException";
@@ -695,31 +695,30 @@ export declare class IncorrectCidrStateException extends __BaseException {
  */
 export interface AllowCustomRoutingTrafficRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group.</p>
+     * @public
      */
     EndpointGroupArn: string | undefined;
     /**
-     * @public
      * <p>An ID for the endpoint. For custom routing accelerators, this is the virtual private cloud (VPC) subnet ID.</p>
+     * @public
      */
     EndpointId: string | undefined;
     /**
-     * @public
      * <p>A list of specific Amazon EC2 instance IP addresses (destination addresses) in a subnet that you want to allow to receive
      * 			traffic. The IP addresses must be a subset of the IP addresses that you specified for the endpoint group.</p>
      *          <p>
      *             <code>DestinationAddresses</code> is required if <code>AllowAllTrafficToEndpoint</code> is <code>FALSE</code> or is
      * 		not specified.</p>
+     * @public
      */
     DestinationAddresses?: string[];
     /**
-     * @public
      * <p>A list of specific Amazon EC2 instance ports (destination ports) that you want to allow to receive traffic.</p>
+     * @public
      */
     DestinationPorts?: number[];
     /**
-     * @public
      * <p>Indicates whether all destination IP addresses and ports for a specified VPC subnet endpoint can receive traffic
      * 			from a custom routing accelerator. The value is TRUE or FALSE. </p>
      *          <p>When set to TRUE, <i>all</i> destinations in the custom routing VPC subnet can receive traffic. Note
@@ -728,13 +727,14 @@ export interface AllowCustomRoutingTrafficRequest {
      * 			to receive traffic. A list of ports is optional. If you don't specify a list of ports, the ports that can accept traffic is
      * 			the same as the ports configured for the endpoint group.</p>
      *          <p>The default value is FALSE.</p>
+     * @public
      */
     AllowAllTrafficToEndpoint?: boolean;
 }
 /**
- * @public
  * <p>The listener that you specified has an endpoint group associated with it. You must remove all dependent resources
  * 			from a listener before you can delete it.</p>
+ * @public
  */
 export declare class AssociatedEndpointGroupFoundException extends __BaseException {
     readonly name: "AssociatedEndpointGroupFoundException";
@@ -746,9 +746,9 @@ export declare class AssociatedEndpointGroupFoundException extends __BaseExcepti
     constructor(opts: __ExceptionOptionType<AssociatedEndpointGroupFoundException, __BaseException>);
 }
 /**
- * @public
  * <p>The accelerator that you specified has a listener associated with it. You must remove all dependent resources from an
  * 			accelerator before you can delete it.</p>
+ * @public
  */
 export declare class AssociatedListenerFoundException extends __BaseException {
     readonly name: "AssociatedListenerFoundException";
@@ -760,62 +760,62 @@ export declare class AssociatedListenerFoundException extends __BaseException {
     constructor(opts: __ExceptionOptionType<AssociatedListenerFoundException, __BaseException>);
 }
 /**
- * @public
  * <p>An Amazon Web Services resource that is supported by Global Accelerator and can be added as an endpoint for an accelerator.</p>
+ * @public
  */
 export interface Resource {
     /**
-     * @public
      * <p>The endpoint ID for the endpoint (Amazon Web Services resource).</p>
+     * @public
      */
     EndpointId: string | undefined;
     /**
-     * @public
      * <p>The Amazon Web Services Region where a resource is located.</p>
+     * @public
      */
     Region?: string;
 }
 /**
- * @public
  * <p>A cross-account attachment in Global Accelerator. A cross-account attachment
  * 			specifies the <i>principals</i> who have permission to add to accelerators in their own
  * 			account the resources in your account that you also list in the attachment.</p>
+ * @public
  */
 export interface Attachment {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the cross-account attachment.</p>
+     * @public
      */
     AttachmentArn?: string;
     /**
-     * @public
      * <p>The name of the cross-account attachment.</p>
+     * @public
      */
     Name?: string;
     /**
-     * @public
      * <p>The principals included in the cross-account attachment.</p>
+     * @public
      */
     Principals?: string[];
     /**
-     * @public
      * <p>The resources included in the cross-account attachment.</p>
+     * @public
      */
     Resources?: Resource[];
     /**
-     * @public
      * <p>The date and time that the cross-account attachment was last modified.</p>
+     * @public
      */
     LastModifiedTime?: Date;
     /**
-     * @public
      * <p>The date and time that the cross-account attachment was created.</p>
+     * @public
      */
     CreatedTime?: Date;
 }
 /**
- * @public
  * <p>No cross-account attachment was found.</p>
+ * @public
  */
 export declare class AttachmentNotFoundException extends __BaseException {
     readonly name: "AttachmentNotFoundException";
@@ -827,21 +827,21 @@ export declare class AttachmentNotFoundException extends __BaseException {
     constructor(opts: __ExceptionOptionType<AttachmentNotFoundException, __BaseException>);
 }
 /**
- * @public
  * <p>Provides authorization for Amazon to bring a specific IP address range to a specific Amazon Web Services
  * 			account using bring your own IP addresses (BYOIP). </p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/using-byoip.html">Bring your own
  * 		    IP addresses (BYOIP)</a> in the <i>Global Accelerator Developer Guide</i>.</p>
+ * @public
  */
 export interface CidrAuthorizationContext {
     /**
-     * @public
      * <p>The plain-text authorization message for the prefix and account.</p>
+     * @public
      */
     Message: string | undefined;
     /**
-     * @public
      * <p>The signed authorization message for the prefix and account.</p>
+     * @public
      */
     Signature: string | undefined;
 }
@@ -858,18 +858,18 @@ export declare const ClientAffinity: {
  */
 export type ClientAffinity = (typeof ClientAffinity)[keyof typeof ClientAffinity];
 /**
- * @public
  * <p>A complex type that contains a <code>Tag</code> key and <code>Tag</code> value.</p>
+ * @public
  */
 export interface Tag {
     /**
-     * @public
      * <p>A string that contains a <code>Tag</code> key.</p>
+     * @public
      */
     Key: string | undefined;
     /**
-     * @public
      * <p>A string that contains a <code>Tag</code> value.</p>
+     * @public
      */
     Value: string | undefined;
 }
@@ -878,18 +878,17 @@ export interface Tag {
  */
 export interface CreateAcceleratorRequest {
     /**
-     * @public
      * <p>The name of the accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters,
      * 			periods (.), or hyphens (-), and must not begin or end with a hyphen or period.</p>
+     * @public
      */
     Name: string | undefined;
     /**
-     * @public
      * <p>The IP address type that an accelerator supports. For a standard accelerator, the value can be IPV4 or DUAL_STACK.</p>
+     * @public
      */
     IpAddressType?: IpAddressType;
     /**
-     * @public
      * <p>Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose an IPv4 address
      * 			from your own pool to use for the accelerator's static IPv4 address when you create an accelerator. </p>
      *          <p>After you bring an address range to Amazon Web Services, it appears in your account as an address pool.
@@ -902,25 +901,26 @@ export interface CreateAcceleratorRequest {
      * 			accelerator with the new addresses.</p>
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/using-byoip.html">Bring
      * 		    your own IP addresses (BYOIP)</a> in the <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     IpAddresses?: string[];
     /**
-     * @public
      * <p>Indicates whether an accelerator is enabled. The value is true or false. The default value is true. </p>
      *          <p>If the value is set to true, an accelerator cannot be deleted. If set to false, the accelerator can be deleted.</p>
+     * @public
      */
     Enabled?: boolean;
     /**
-     * @public
      * <p>A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the
      * 			uniqueness—of an accelerator.</p>
+     * @public
      */
     IdempotencyToken?: string;
     /**
-     * @public
      * <p>Create tags for an accelerator.</p>
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/tagging-in-global-accelerator.html">Tagging
      * 		    in Global Accelerator</a> in the <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     Tags?: Tag[];
 }
@@ -929,8 +929,8 @@ export interface CreateAcceleratorRequest {
  */
 export interface CreateAcceleratorResponse {
     /**
-     * @public
      * <p>The accelerator that is created by specifying a listener and the supported IP address types.</p>
+     * @public
      */
     Accelerator?: Accelerator;
 }
@@ -939,33 +939,33 @@ export interface CreateAcceleratorResponse {
  */
 export interface CreateCrossAccountAttachmentRequest {
     /**
-     * @public
      * <p>The name of the cross-account attachment. </p>
+     * @public
      */
     Name: string | undefined;
     /**
-     * @public
      * <p>The principals to list in the cross-account attachment. A principal can be an Amazon Web Services account
      * 			number or the Amazon Resource Name (ARN) for an accelerator. </p>
+     * @public
      */
     Principals?: string[];
     /**
-     * @public
      * <p>The Amazon Resource Names (ARNs) for the resources to list in the cross-account attachment. A resource can
      * 			be any supported Amazon Web Services resource type for Global Accelerator. </p>
+     * @public
      */
     Resources?: Resource[];
     /**
-     * @public
      * <p>A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the
      * 			uniqueness—of the request.</p>
+     * @public
      */
     IdempotencyToken?: string;
     /**
-     * @public
      * <p>Create tags for cross-account attachment.</p>
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/tagging-in-global-accelerator.html">Tagging
      * 			in Global Accelerator</a> in the <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     Tags?: Tag[];
 }
@@ -974,8 +974,8 @@ export interface CreateCrossAccountAttachmentRequest {
  */
 export interface CreateCrossAccountAttachmentResponse {
     /**
-     * @public
      * <p>Information about the cross-account attachment.</p>
+     * @public
      */
     CrossAccountAttachment?: Attachment;
 }
@@ -984,18 +984,17 @@ export interface CreateCrossAccountAttachmentResponse {
  */
 export interface CreateCustomRoutingAcceleratorRequest {
     /**
-     * @public
      * <p>The name of a custom routing accelerator. The name can have a maximum of 64 characters, must contain
      * 		only alphanumeric characters or hyphens (-), and must not begin or end with a hyphen.</p>
+     * @public
      */
     Name: string | undefined;
     /**
-     * @public
      * <p>The IP address type that an accelerator supports. For a custom routing accelerator, the value must be IPV4.</p>
+     * @public
      */
     IpAddressType?: IpAddressType;
     /**
-     * @public
      * <p>Optionally, if you've added your own IP address pool to Global Accelerator (BYOIP), you can choose an IPv4 address
      * 			from your own pool to use for the accelerator's static IPv4 address when you create an accelerator. </p>
      *          <p>After you bring an address range to Amazon Web Services, it appears in your account as an address pool.
@@ -1008,25 +1007,26 @@ export interface CreateCustomRoutingAcceleratorRequest {
      * 			accelerator with the new addresses.</p>
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/using-byoip.html">Bring
      * 			your own IP addresses (BYOIP)</a> in the <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     IpAddresses?: string[];
     /**
-     * @public
      * <p>Indicates whether an accelerator is enabled. The value is true or false. The default value is true. </p>
      *          <p>If the value is set to true, an accelerator cannot be deleted. If set to false, the accelerator can be deleted.</p>
+     * @public
      */
     Enabled?: boolean;
     /**
-     * @public
      * <p>A unique, case-sensitive identifier that you provide to ensure the idempotency—that
      * 			is, the uniqueness—of the request.</p>
+     * @public
      */
     IdempotencyToken?: string;
     /**
-     * @public
      * <p>Create tags for an accelerator.</p>
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/tagging-in-global-accelerator.html">Tagging
      * 	    in Global Accelerator</a> in the <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     Tags?: Tag[];
 }
@@ -1043,39 +1043,38 @@ export declare const CustomRoutingAcceleratorStatus: {
  */
 export type CustomRoutingAcceleratorStatus = (typeof CustomRoutingAcceleratorStatus)[keyof typeof CustomRoutingAcceleratorStatus];
 /**
- * @public
  * <p>Attributes of a custom routing accelerator.</p>
+ * @public
  */
 export interface CustomRoutingAccelerator {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the custom routing accelerator.</p>
+     * @public
      */
     AcceleratorArn?: string;
     /**
-     * @public
      * <p>The name of the accelerator. The name must contain only alphanumeric characters or
      * 			hyphens (-), and must not begin or end with a hyphen.</p>
+     * @public
      */
     Name?: string;
     /**
-     * @public
      * <p>The IP address type that an accelerator supports. For a custom routing accelerator, the value must be IPV4.</p>
+     * @public
      */
     IpAddressType?: IpAddressType;
     /**
-     * @public
      * <p>Indicates whether the accelerator is enabled. The value is true or false. The default value is true. </p>
      *          <p>If the value is set to true, the accelerator cannot be deleted. If set to false, accelerator can be deleted.</p>
+     * @public
      */
     Enabled?: boolean;
     /**
-     * @public
      * <p>The static IP addresses that Global Accelerator associates with the accelerator.</p>
+     * @public
      */
     IpSets?: IpSet[];
     /**
-     * @public
      * <p>The Domain Name System (DNS) name that Global Accelerator creates that points to an accelerator's static IPv4 addresses. </p>
      *          <p>The naming convention for the DNS name is the following: A lowercase letter a,
      * 			followed by a 16-bit random hex string, followed by .awsglobalaccelerator.com. For example:
@@ -1084,21 +1083,22 @@ export interface CustomRoutingAccelerator {
      * 			and the AAAA record for all four static addresses for the accelerator: two IPv4 addresses and two IPv6 addresses.</p>
      *          <p>For more information about the default DNS name, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/dns-addressing-custom-domains.dns-addressing.html">
      * 			Support for DNS addressing in Global Accelerator</a> in the <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     DnsName?: string;
     /**
-     * @public
      * <p>Describes the deployment status of the accelerator.</p>
+     * @public
      */
     Status?: CustomRoutingAcceleratorStatus;
     /**
-     * @public
      * <p>The date and time that the accelerator was created.</p>
+     * @public
      */
     CreatedTime?: Date;
     /**
-     * @public
      * <p>The date and time that the accelerator was last modified.</p>
+     * @public
      */
     LastModifiedTime?: Date;
 }
@@ -1107,8 +1107,8 @@ export interface CustomRoutingAccelerator {
  */
 export interface CreateCustomRoutingAcceleratorResponse {
     /**
-     * @public
      * <p>The accelerator that is created.</p>
+     * @public
      */
     Accelerator?: CustomRoutingAccelerator;
 }
@@ -1125,24 +1125,24 @@ export declare const CustomRoutingProtocol: {
  */
 export type CustomRoutingProtocol = (typeof CustomRoutingProtocol)[keyof typeof CustomRoutingProtocol];
 /**
- * @public
  * <p>For a custom routing accelerator, sets the port range and protocol for all endpoints (virtual
  * 			private cloud subnets) in an endpoint group to accept client traffic on.</p>
+ * @public
  */
 export interface CustomRoutingDestinationConfiguration {
     /**
-     * @public
      * <p>The first port, inclusive, in the range of ports for the endpoint group that is associated with a custom routing accelerator.</p>
+     * @public
      */
     FromPort: number | undefined;
     /**
-     * @public
      * <p>The last port, inclusive, in the range of ports for the endpoint group that is associated with a custom routing accelerator.</p>
+     * @public
      */
     ToPort: number | undefined;
     /**
-     * @public
      * <p>The protocol for the endpoint group that is associated with a custom routing accelerator. The protocol can be either TCP or UDP.</p>
+     * @public
      */
     Protocols: CustomRoutingProtocol[] | undefined;
 }
@@ -1151,26 +1151,26 @@ export interface CustomRoutingDestinationConfiguration {
  */
 export interface CreateCustomRoutingEndpointGroupRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the listener for a custom routing endpoint.</p>
+     * @public
      */
     ListenerArn: string | undefined;
     /**
-     * @public
      * <p>The Amazon Web Services Region where the endpoint group is located. A listener can have only one endpoint group in a
      * 		specific Region.</p>
+     * @public
      */
     EndpointGroupRegion: string | undefined;
     /**
-     * @public
      * <p>Sets the port range and protocol for all endpoints (virtual private cloud subnets) in a custom routing endpoint group to accept
      * 		client traffic on.</p>
+     * @public
      */
     DestinationConfigurations: CustomRoutingDestinationConfiguration[] | undefined;
     /**
-     * @public
      * <p>A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the
      * 		uniqueness—of the request.</p>
+     * @public
      */
     IdempotencyToken?: string;
 }
@@ -1187,53 +1187,53 @@ export declare const Protocol: {
  */
 export type Protocol = (typeof Protocol)[keyof typeof Protocol];
 /**
- * @public
  * <p>For a custom routing accelerator, describes the port range and protocol for all endpoints
  * 			(virtual private cloud subnets) in an endpoint group to accept client traffic on.</p>
+ * @public
  */
 export interface CustomRoutingDestinationDescription {
     /**
-     * @public
      * <p>The first port, inclusive, in the range of ports for the endpoint group that is associated with a custom routing accelerator.</p>
+     * @public
      */
     FromPort?: number;
     /**
-     * @public
      * <p>The last port, inclusive, in the range of ports for the endpoint group that is associated with a custom routing accelerator.</p>
+     * @public
      */
     ToPort?: number;
     /**
-     * @public
      * <p>The protocol for the endpoint group that is associated with a custom routing accelerator. The protocol can be either TCP or UDP.</p>
+     * @public
      */
     Protocols?: Protocol[];
 }
 /**
- * @public
  * <p>A complex type for the endpoint group for a custom routing accelerator. An Amazon Web Services Region can have only one endpoint group for a specific listener.
  * 		</p>
+ * @public
  */
 export interface CustomRoutingEndpointGroup {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group.</p>
+     * @public
      */
     EndpointGroupArn?: string;
     /**
-     * @public
      * <p>The Amazon Web Services Region where the endpoint group is located.</p>
+     * @public
      */
     EndpointGroupRegion?: string;
     /**
-     * @public
      * <p>For a custom routing accelerator, describes the port range and protocol for all endpoints
      * 			(virtual private cloud subnets) in an endpoint group to accept client traffic on.</p>
+     * @public
      */
     DestinationDescriptions?: CustomRoutingDestinationDescription[];
     /**
-     * @public
      * <p>For a custom routing accelerator, describes the endpoints (virtual private cloud subnets) in an
      * 			endpoint group to accept client traffic on.</p>
+     * @public
      */
     EndpointDescriptions?: CustomRoutingEndpointDescription[];
 }
@@ -1242,14 +1242,14 @@ export interface CustomRoutingEndpointGroup {
  */
 export interface CreateCustomRoutingEndpointGroupResponse {
     /**
-     * @public
      * <p>The information about the endpoint group created for a custom routing accelerator.</p>
+     * @public
      */
     EndpointGroup?: CustomRoutingEndpointGroup;
 }
 /**
- * @public
  * <p>The endpoint group that you specified already exists.</p>
+ * @public
  */
 export declare class EndpointGroupAlreadyExistsException extends __BaseException {
     readonly name: "EndpointGroupAlreadyExistsException";
@@ -1261,8 +1261,8 @@ export declare class EndpointGroupAlreadyExistsException extends __BaseException
     constructor(opts: __ExceptionOptionType<EndpointGroupAlreadyExistsException, __BaseException>);
 }
 /**
- * @public
  * <p>The port numbers that you specified are not valid numbers or are not unique for this accelerator.</p>
+ * @public
  */
 export declare class InvalidPortRangeException extends __BaseException {
     readonly name: "InvalidPortRangeException";
@@ -1274,8 +1274,8 @@ export declare class InvalidPortRangeException extends __BaseException {
     constructor(opts: __ExceptionOptionType<InvalidPortRangeException, __BaseException>);
 }
 /**
- * @public
  * <p>The listener that you specified doesn't exist.</p>
+ * @public
  */
 export declare class ListenerNotFoundException extends __BaseException {
     readonly name: "ListenerNotFoundException";
@@ -1287,18 +1287,18 @@ export declare class ListenerNotFoundException extends __BaseException {
     constructor(opts: __ExceptionOptionType<ListenerNotFoundException, __BaseException>);
 }
 /**
- * @public
  * <p>A complex type for a range of ports for a listener.</p>
+ * @public
  */
 export interface PortRange {
     /**
-     * @public
      * <p>The first port in the range of ports, inclusive.</p>
+     * @public
      */
     FromPort?: number;
     /**
-     * @public
      * <p>The last port in the range of ports, inclusive.</p>
+     * @public
      */
     ToPort?: number;
 }
@@ -1307,39 +1307,39 @@ export interface PortRange {
  */
 export interface CreateCustomRoutingListenerRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the accelerator for a custom routing listener.</p>
+     * @public
      */
     AcceleratorArn: string | undefined;
     /**
-     * @public
      * <p>The port range to support for connections from clients to your accelerator.</p>
      *          <p>Separately, you set port ranges for endpoints. For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/about-custom-routing-endpoints.html">About
      * 		endpoints for custom routing accelerators</a>.</p>
+     * @public
      */
     PortRanges: PortRange[] | undefined;
     /**
-     * @public
      * <p>A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the
      * 		uniqueness—of the request.</p>
+     * @public
      */
     IdempotencyToken?: string;
 }
 /**
- * @public
  * <p>A complex type for a listener for a custom routing accelerator.</p>
+ * @public
  */
 export interface CustomRoutingListener {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the listener.</p>
+     * @public
      */
     ListenerArn?: string;
     /**
-     * @public
      * <p>The port range to support for connections from clients to your accelerator.</p>
      *          <p>Separately, you set port ranges for endpoints. For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/about-custom-routing-endpoints.html">About
      * 				endpoints for custom routing accelerators</a>.</p>
+     * @public
      */
     PortRanges?: PortRange[];
 }
@@ -1348,8 +1348,8 @@ export interface CustomRoutingListener {
  */
 export interface CreateCustomRoutingListenerResponse {
     /**
-     * @public
      * <p>The listener that you've created for a custom routing accelerator.</p>
+     * @public
      */
     Listener?: CustomRoutingListener;
 }
@@ -1367,25 +1367,25 @@ export declare const HealthCheckProtocol: {
  */
 export type HealthCheckProtocol = (typeof HealthCheckProtocol)[keyof typeof HealthCheckProtocol];
 /**
- * @public
  * <p>Override specific listener ports used to route traffic to endpoints that are part of an endpoint group.
  * 			For example, you can create a port override in which the listener
  * 			receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080
  * 			and 1443, respectively, on the endpoints.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/about-endpoint-groups-port-override.html">
  * 		    Overriding listener ports</a> in the <i>Global Accelerator Developer Guide</i>.</p>
+ * @public
  */
 export interface PortOverride {
     /**
-     * @public
      * <p>The listener port that you want to map to a specific endpoint port. This is the port that user traffic
      * 		    arrives to the Global Accelerator on.</p>
+     * @public
      */
     ListenerPort?: number;
     /**
-     * @public
      * <p>The endpoint port that you want a listener port to be mapped to. This is the port on the endpoint,
      * 		    such as the Application Load Balancer or Amazon EC2 instance.</p>
+     * @public
      */
     EndpointPort?: number;
 }
@@ -1394,143 +1394,143 @@ export interface PortOverride {
  */
 export interface CreateEndpointGroupRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the listener.</p>
+     * @public
      */
     ListenerArn: string | undefined;
     /**
-     * @public
      * <p>The Amazon Web Services Region where the endpoint group is located. A listener can have only one endpoint group in a
      * 			specific Region.</p>
+     * @public
      */
     EndpointGroupRegion: string | undefined;
     /**
-     * @public
      * <p>The list of endpoint objects.</p>
+     * @public
      */
     EndpointConfigurations?: EndpointConfiguration[];
     /**
-     * @public
      * <p>The percentage of traffic to send to an Amazon Web Services Region. Additional traffic is distributed to other endpoint groups for
      * 			this listener. </p>
      *          <p>Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is
      * 			applied to the traffic that would otherwise have been routed to the Region based on optimal routing.</p>
      *          <p>The default value is 100.</p>
+     * @public
      */
     TrafficDialPercentage?: number;
     /**
-     * @public
      * <p>The port that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port
      * 	        is the listener port that this endpoint group is associated with. If listener port is a list of ports, Global Accelerator uses the
      * 			first port in the list.</p>
+     * @public
      */
     HealthCheckPort?: number;
     /**
-     * @public
      * <p>The protocol that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default
      * 			value is TCP.</p>
+     * @public
      */
     HealthCheckProtocol?: HealthCheckProtocol;
     /**
-     * @public
      * <p>If the protocol is HTTP/S, then this specifies the path that is the destination for health check targets. The
      * 			default value is slash (/).</p>
+     * @public
      */
     HealthCheckPath?: string;
     /**
-     * @public
      * <p>The time—10 seconds or 30 seconds—between each health check for an endpoint. The default value is 30.</p>
+     * @public
      */
     HealthCheckIntervalSeconds?: number;
     /**
-     * @public
      * <p>The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an
      * 			unhealthy endpoint to healthy. The default value is 3.</p>
+     * @public
      */
     ThresholdCount?: number;
     /**
-     * @public
      * <p>A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the
      * 			uniqueness—of the request.</p>
+     * @public
      */
     IdempotencyToken?: string;
     /**
-     * @public
      * <p>Override specific listener ports used to route traffic to endpoints that are part of this endpoint group.
      * 			For example, you can create a port override in which the listener
      * 			receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080
      * 			and 1443, respectively, on the endpoints.</p>
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/about-endpoint-groups-port-override.html">
      * 			Overriding listener ports</a> in the <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     PortOverrides?: PortOverride[];
 }
 /**
- * @public
  * <p>A complex type for the endpoint group. An Amazon Web Services Region can have only one endpoint group for a specific listener.
  * 		</p>
+ * @public
  */
 export interface EndpointGroup {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group.</p>
+     * @public
      */
     EndpointGroupArn?: string;
     /**
-     * @public
      * <p>The Amazon Web Services Region where the endpoint group is located.</p>
+     * @public
      */
     EndpointGroupRegion?: string;
     /**
-     * @public
      * <p>The list of endpoint objects.</p>
+     * @public
      */
     EndpointDescriptions?: EndpointDescription[];
     /**
-     * @public
      * <p>The percentage of traffic to send to an Amazon Web Services Region. Additional traffic is distributed to other endpoint groups for
      * 			this listener. </p>
      *          <p>Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is
      * 			applied to the traffic that would otherwise have been routed to the Region based on optimal routing.</p>
      *          <p>The default value is 100.</p>
+     * @public
      */
     TrafficDialPercentage?: number;
     /**
-     * @public
      * <p>The port that Global Accelerator uses to perform health checks on endpoints that are part of this endpoint group. </p>
      *          <p>The default port is the port for the listener that this endpoint group is associated with. If the listener port is a
      * 		    list, Global Accelerator uses the first specified port in the list of ports.</p>
+     * @public
      */
     HealthCheckPort?: number;
     /**
-     * @public
      * <p>The protocol that Global Accelerator uses to perform health checks on endpoints that are part of this endpoint group. The default
      * 			value is TCP.</p>
+     * @public
      */
     HealthCheckProtocol?: HealthCheckProtocol;
     /**
-     * @public
      * <p>If the protocol is HTTP/S, then this value provides the ping path that Global Accelerator uses for the destination on the
      * 			endpoints for health checks. The default is slash (/).</p>
+     * @public
      */
     HealthCheckPath?: string;
     /**
-     * @public
      * <p>The time—10 seconds or 30 seconds—between health checks for each endpoint. The default value is 30.</p>
+     * @public
      */
     HealthCheckIntervalSeconds?: number;
     /**
-     * @public
      * <p>The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an
      * 			unhealthy endpoint to healthy. The default value is 3.</p>
+     * @public
      */
     ThresholdCount?: number;
     /**
-     * @public
      * <p>Allows you to override the destination ports used to route traffic to an endpoint.
      * 			Using a port override lets you map a list of external destination ports (that your
      * 			users send traffic to) to a list of internal destination ports that you want an application
      * 			endpoint to receive traffic on. </p>
+     * @public
      */
     PortOverrides?: PortOverride[];
 }
@@ -1539,8 +1539,8 @@ export interface EndpointGroup {
  */
 export interface CreateEndpointGroupResponse {
     /**
-     * @public
      * <p>The information about the endpoint group that was created.</p>
+     * @public
      */
     EndpointGroup?: EndpointGroup;
 }
@@ -1549,22 +1549,21 @@ export interface CreateEndpointGroupResponse {
  */
 export interface CreateListenerRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of your accelerator.</p>
+     * @public
      */
     AcceleratorArn: string | undefined;
     /**
-     * @public
      * <p>The list of port ranges to support for connections from clients to your accelerator.</p>
+     * @public
      */
     PortRanges: PortRange[] | undefined;
     /**
-     * @public
      * <p>The protocol for connections from clients to your accelerator.</p>
+     * @public
      */
     Protocol: Protocol | undefined;
     /**
-     * @public
      * <p>Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications,
      * 			regardless of the port and protocol of the client request. Client affinity gives you control over whether to always
      * 			route each client to the same specific endpoint.</p>
@@ -1577,37 +1576,37 @@ export interface CreateListenerRequest {
      * 		    instead. When you use the <code>SOURCE_IP</code> setting, Global Accelerator uses the "two-tuple" (2-tuple) properties—
      * 			source (client) IP address and destination IP address—to select the hash value.</p>
      *          <p>The default value is <code>NONE</code>.</p>
+     * @public
      */
     ClientAffinity?: ClientAffinity;
     /**
-     * @public
      * <p>A unique, case-sensitive identifier that you provide to ensure the idempotency—that is, the
      * 			uniqueness—of the request.</p>
+     * @public
      */
     IdempotencyToken?: string;
 }
 /**
- * @public
  * <p>A complex type for a listener.</p>
+ * @public
  */
 export interface Listener {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the listener.</p>
+     * @public
      */
     ListenerArn?: string;
     /**
-     * @public
      * <p>The list of port ranges for the connections from clients to the accelerator.</p>
+     * @public
      */
     PortRanges?: PortRange[];
     /**
-     * @public
      * <p>The protocol for the connections from clients to the accelerator.</p>
+     * @public
      */
     Protocol?: Protocol;
     /**
-     * @public
      * <p>Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications,
      * 			regardless of the port and protocol of the client request. Client affinity gives you control over whether to always
      * 			route each client to the same specific endpoint.</p>
@@ -1620,6 +1619,7 @@ export interface Listener {
      * 		    instead. When you use the <code>SOURCE_IP</code> setting, Global Accelerator uses the "two-tuple" (2-tuple) properties—
      * 			source (client) IP address and destination IP address—to select the hash value.</p>
      *          <p>The default value is <code>NONE</code>.</p>
+     * @public
      */
     ClientAffinity?: ClientAffinity;
 }
@@ -1628,57 +1628,57 @@ export interface Listener {
  */
 export interface CreateListenerResponse {
     /**
-     * @public
      * <p>The listener that you've created.</p>
+     * @public
      */
     Listener?: Listener;
 }
 /**
- * @public
  * <p>An endpoint (Amazon Web Services resource) that is listed in a cross-account attachment and
  * 			can be added to an accelerator by specified principals, that are also listed in the attachment.</p>
+ * @public
  */
 export interface CrossAccountResource {
     /**
-     * @public
      * <p>The endpoint ID for the endpoint that is listed in a cross-account attachment and
      * 			can be added to an accelerator by specified principals.</p>
+     * @public
      */
     EndpointId?: string;
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the cross-account attachment that specifies the endpoints (resources)
      * 			that can be added to accelerators and principals that have permission to add the endpoints to accelerators.</p>
+     * @public
      */
     AttachmentArn?: string;
 }
 /**
- * @public
  * <p>Attributes of a custom routing accelerator.</p>
+ * @public
  */
 export interface CustomRoutingAcceleratorAttributes {
     /**
-     * @public
      * <p>Indicates whether flow logs are enabled. The default value is false. If the value is true,
      * 			<code>FlowLogsS3Bucket</code> and <code>FlowLogsS3Prefix</code> must be specified.</p>
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/monitoring-global-accelerator.flow-logs.html">Flow logs</a> in
      * 		    the <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     FlowLogsEnabled?: boolean;
     /**
-     * @public
      * <p>The name of the Amazon S3 bucket for the flow logs. Attribute is required if <code>FlowLogsEnabled</code> is
      * 		    <code>true</code>. The bucket must exist and have a bucket policy that grants Global Accelerator permission to write to the
      * 			bucket.</p>
+     * @public
      */
     FlowLogsS3Bucket?: string;
     /**
-     * @public
      * <p>The prefix for the location in the Amazon S3 bucket for the flow logs. Attribute is required if
      * 			<code>FlowLogsEnabled</code> is <code>true</code>.</p>
      *          <p>If you don’t specify a prefix, the flow logs are stored in the
      * 			root of the bucket. If you specify slash (/) for the S3 bucket prefix, the log file bucket folder structure will include a double slash (//), like the following:</p>
      *          <p>DOC-EXAMPLE-BUCKET//AWSLogs/aws_account_id</p>
+     * @public
      */
     FlowLogsS3Prefix?: string;
 }
@@ -1699,8 +1699,8 @@ export type CustomRoutingDestinationTrafficState = (typeof CustomRoutingDestinat
  */
 export interface DeleteAcceleratorRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of an accelerator.</p>
+     * @public
      */
     AcceleratorArn: string | undefined;
 }
@@ -1709,8 +1709,8 @@ export interface DeleteAcceleratorRequest {
  */
 export interface DeleteCrossAccountAttachmentRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) for the cross-account attachment to delete.</p>
+     * @public
      */
     AttachmentArn: string | undefined;
 }
@@ -1719,8 +1719,8 @@ export interface DeleteCrossAccountAttachmentRequest {
  */
 export interface DeleteCustomRoutingAcceleratorRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the custom routing accelerator to delete.</p>
+     * @public
      */
     AcceleratorArn: string | undefined;
 }
@@ -1729,8 +1729,8 @@ export interface DeleteCustomRoutingAcceleratorRequest {
  */
 export interface DeleteCustomRoutingEndpointGroupRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group to delete.</p>
+     * @public
      */
     EndpointGroupArn: string | undefined;
 }
@@ -1739,8 +1739,8 @@ export interface DeleteCustomRoutingEndpointGroupRequest {
  */
 export interface DeleteCustomRoutingListenerRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the listener to delete.</p>
+     * @public
      */
     ListenerArn: string | undefined;
 }
@@ -1749,8 +1749,8 @@ export interface DeleteCustomRoutingListenerRequest {
  */
 export interface DeleteEndpointGroupRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group to delete.</p>
+     * @public
      */
     EndpointGroupArn: string | undefined;
 }
@@ -1759,8 +1759,8 @@ export interface DeleteEndpointGroupRequest {
  */
 export interface DeleteListenerRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the listener.</p>
+     * @public
      */
     ListenerArn: string | undefined;
 }
@@ -1769,30 +1769,29 @@ export interface DeleteListenerRequest {
  */
 export interface DenyCustomRoutingTrafficRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group.</p>
+     * @public
      */
     EndpointGroupArn: string | undefined;
     /**
-     * @public
      * <p>An ID for the endpoint. For custom routing accelerators, this is the virtual private cloud (VPC) subnet ID.</p>
+     * @public
      */
     EndpointId: string | undefined;
     /**
-     * @public
      * <p>A list of specific Amazon EC2 instance IP addresses (destination addresses) in a subnet that you want to prevent from receiving
      * 			traffic. The IP addresses must be a subset of the IP addresses allowed for the VPC subnet associated with the
      * 			endpoint group.</p>
+     * @public
      */
     DestinationAddresses?: string[];
     /**
-     * @public
      * <p>A list of specific Amazon EC2 instance ports (destination ports) in a subnet endpoint that you want to prevent from
      * 			receiving traffic.</p>
+     * @public
      */
     DestinationPorts?: number[];
     /**
-     * @public
      * <p>Indicates whether all destination IP addresses and ports for a specified VPC subnet endpoint <i>cannot</i>
      * 			receive traffic from a custom routing accelerator. The value is TRUE or FALSE. </p>
      *          <p>When set to TRUE, <i>no</i> destinations in the custom routing VPC subnet can receive traffic. Note
@@ -1801,6 +1800,7 @@ export interface DenyCustomRoutingTrafficRequest {
      * 			traffic. A list of ports is optional. If you don't specify a list of ports, the ports that can accept traffic is
      * 			the same as the ports configured for the endpoint group.</p>
      *          <p>The default value is FALSE.</p>
+     * @public
      */
     DenyAllTrafficToEndpoint?: boolean;
 }
@@ -1809,9 +1809,9 @@ export interface DenyCustomRoutingTrafficRequest {
  */
 export interface DeprovisionByoipCidrRequest {
     /**
-     * @public
      * <p>The address range, in CIDR notation. The prefix must be the same prefix that you specified
      * 			when you provisioned the address range.</p>
+     * @public
      */
     Cidr: string | undefined;
 }
@@ -1820,8 +1820,8 @@ export interface DeprovisionByoipCidrRequest {
  */
 export interface DeprovisionByoipCidrResponse {
     /**
-     * @public
      * <p>Information about the address range.</p>
+     * @public
      */
     ByoipCidr?: ByoipCidr;
 }
@@ -1830,8 +1830,8 @@ export interface DeprovisionByoipCidrResponse {
  */
 export interface DescribeAcceleratorRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the accelerator to describe.</p>
+     * @public
      */
     AcceleratorArn: string | undefined;
 }
@@ -1840,8 +1840,8 @@ export interface DescribeAcceleratorRequest {
  */
 export interface DescribeAcceleratorResponse {
     /**
-     * @public
      * <p>The description of the accelerator.</p>
+     * @public
      */
     Accelerator?: Accelerator;
 }
@@ -1850,8 +1850,8 @@ export interface DescribeAcceleratorResponse {
  */
 export interface DescribeAcceleratorAttributesRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the accelerator with the attributes that you want to describe.</p>
+     * @public
      */
     AcceleratorArn: string | undefined;
 }
@@ -1860,8 +1860,8 @@ export interface DescribeAcceleratorAttributesRequest {
  */
 export interface DescribeAcceleratorAttributesResponse {
     /**
-     * @public
      * <p>The attributes of the accelerator.</p>
+     * @public
      */
     AcceleratorAttributes?: AcceleratorAttributes;
 }
@@ -1870,8 +1870,8 @@ export interface DescribeAcceleratorAttributesResponse {
  */
 export interface DescribeCrossAccountAttachmentRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) for the cross-account attachment to describe.</p>
+     * @public
      */
     AttachmentArn: string | undefined;
 }
@@ -1880,8 +1880,8 @@ export interface DescribeCrossAccountAttachmentRequest {
  */
 export interface DescribeCrossAccountAttachmentResponse {
     /**
-     * @public
      * <p>Information about the cross-account attachment.</p>
+     * @public
      */
     CrossAccountAttachment?: Attachment;
 }
@@ -1890,8 +1890,8 @@ export interface DescribeCrossAccountAttachmentResponse {
  */
 export interface DescribeCustomRoutingAcceleratorRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the accelerator to describe.</p>
+     * @public
      */
     AcceleratorArn: string | undefined;
 }
@@ -1900,8 +1900,8 @@ export interface DescribeCustomRoutingAcceleratorRequest {
  */
 export interface DescribeCustomRoutingAcceleratorResponse {
     /**
-     * @public
      * <p>The description of the custom routing accelerator.</p>
+     * @public
      */
     Accelerator?: CustomRoutingAccelerator;
 }
@@ -1910,8 +1910,8 @@ export interface DescribeCustomRoutingAcceleratorResponse {
  */
 export interface DescribeCustomRoutingAcceleratorAttributesRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the custom routing accelerator to describe the attributes for.</p>
+     * @public
      */
     AcceleratorArn: string | undefined;
 }
@@ -1920,8 +1920,8 @@ export interface DescribeCustomRoutingAcceleratorAttributesRequest {
  */
 export interface DescribeCustomRoutingAcceleratorAttributesResponse {
     /**
-     * @public
      * <p>The attributes of the custom routing accelerator.</p>
+     * @public
      */
     AcceleratorAttributes?: CustomRoutingAcceleratorAttributes;
 }
@@ -1930,8 +1930,8 @@ export interface DescribeCustomRoutingAcceleratorAttributesResponse {
  */
 export interface DescribeCustomRoutingEndpointGroupRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group to describe.</p>
+     * @public
      */
     EndpointGroupArn: string | undefined;
 }
@@ -1940,8 +1940,8 @@ export interface DescribeCustomRoutingEndpointGroupRequest {
  */
 export interface DescribeCustomRoutingEndpointGroupResponse {
     /**
-     * @public
      * <p>The description of an endpoint group for a custom routing accelerator.</p>
+     * @public
      */
     EndpointGroup?: CustomRoutingEndpointGroup;
 }
@@ -1950,8 +1950,8 @@ export interface DescribeCustomRoutingEndpointGroupResponse {
  */
 export interface DescribeCustomRoutingListenerRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the listener to describe.</p>
+     * @public
      */
     ListenerArn: string | undefined;
 }
@@ -1960,8 +1960,8 @@ export interface DescribeCustomRoutingListenerRequest {
  */
 export interface DescribeCustomRoutingListenerResponse {
     /**
-     * @public
      * <p>The description of a listener for a custom routing accelerator.</p>
+     * @public
      */
     Listener?: CustomRoutingListener;
 }
@@ -1970,8 +1970,8 @@ export interface DescribeCustomRoutingListenerResponse {
  */
 export interface DescribeEndpointGroupRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group to describe.</p>
+     * @public
      */
     EndpointGroupArn: string | undefined;
 }
@@ -1980,8 +1980,8 @@ export interface DescribeEndpointGroupRequest {
  */
 export interface DescribeEndpointGroupResponse {
     /**
-     * @public
      * <p>The description of an endpoint group.</p>
+     * @public
      */
     EndpointGroup?: EndpointGroup;
 }
@@ -1990,8 +1990,8 @@ export interface DescribeEndpointGroupResponse {
  */
 export interface DescribeListenerRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the listener to describe.</p>
+     * @public
      */
     ListenerArn: string | undefined;
 }
@@ -2000,100 +2000,100 @@ export interface DescribeListenerRequest {
  */
 export interface DescribeListenerResponse {
     /**
-     * @public
      * <p>The description of a listener.</p>
+     * @public
      */
     Listener?: Listener;
 }
 /**
- * @public
  * <p>An IP address/port combination.</p>
+ * @public
  */
 export interface SocketAddress {
     /**
-     * @public
      * <p>The IP address for the socket address.</p>
+     * @public
      */
     IpAddress?: string;
     /**
-     * @public
      * <p>The port for the socket address.</p>
+     * @public
      */
     Port?: number;
 }
 /**
- * @public
  * <p>The port mappings for a specified endpoint IP address (destination).</p>
+ * @public
  */
 export interface DestinationPortMapping {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the custom routing accelerator
      * 			that you have port mappings for.</p>
+     * @public
      */
     AcceleratorArn?: string;
     /**
-     * @public
      * <p>The IP address/port combinations (sockets) that map to a given destination socket
      * 			address.</p>
+     * @public
      */
     AcceleratorSocketAddresses?: SocketAddress[];
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group.</p>
+     * @public
      */
     EndpointGroupArn?: string;
     /**
-     * @public
      * <p>The ID for the virtual private cloud (VPC) subnet.</p>
+     * @public
      */
     EndpointId?: string;
     /**
-     * @public
      * <p>The Amazon Web Services Region for the endpoint group.</p>
+     * @public
      */
     EndpointGroupRegion?: string;
     /**
-     * @public
      * <p>The endpoint IP address/port combination for traffic received on the accelerator socket address.</p>
+     * @public
      */
     DestinationSocketAddress?: SocketAddress;
     /**
-     * @public
      * <p>The IP address type that an accelerator supports. For a custom routing accelerator, the value must be IPV4.</p>
+     * @public
      */
     IpAddressType?: IpAddressType;
     /**
-     * @public
      * <p>Indicates whether or not a port mapping destination can receive traffic. The value is either ALLOW, if
      * 			traffic is allowed to the destination, or DENY, if traffic is not allowed to the destination.</p>
+     * @public
      */
     DestinationTrafficState?: CustomRoutingDestinationTrafficState;
 }
 /**
- * @public
  * <p>A complex type for an endpoint. Specifies information about the endpoint to remove from the endpoint group.</p>
+ * @public
  */
 export interface EndpointIdentifier {
     /**
-     * @public
      * <p>An ID for the endpoint. If the endpoint is a Network Load Balancer or Application Load Balancer, this is the Amazon
      * 			Resource Name (ARN) of the resource. If the endpoint is an Elastic IP address, this is the Elastic IP address
      * 			allocation ID. For Amazon EC2 instances, this is the EC2 instance ID. </p>
      *          <p>An Application Load Balancer can be either internal or internet-facing.</p>
+     * @public
      */
     EndpointId: string | undefined;
     /**
-     * @public
      * <p>Indicates whether client IP address preservation is enabled for an endpoint. The value is true or false. </p>
      *          <p>If the value is set to true, the client's IP address is preserved in the <code>X-Forwarded-For</code> request header as
      * 			traffic travels to applications on the endpoint fronted by the accelerator.</p>
+     * @public
      */
     ClientIPPreservationEnabled?: boolean;
 }
 /**
- * @public
  * <p>The endpoint that you specified doesn't exist.</p>
+ * @public
  */
 export declare class EndpointNotFoundException extends __BaseException {
     readonly name: "EndpointNotFoundException";
@@ -2105,8 +2105,8 @@ export declare class EndpointNotFoundException extends __BaseException {
     constructor(opts: __ExceptionOptionType<EndpointNotFoundException, __BaseException>);
 }
 /**
- * @public
  * <p>There isn't another item to return.</p>
+ * @public
  */
 export declare class InvalidNextTokenException extends __BaseException {
     readonly name: "InvalidNextTokenException";
@@ -2122,13 +2122,13 @@ export declare class InvalidNextTokenException extends __BaseException {
  */
 export interface ListAcceleratorsRequest {
     /**
-     * @public
      * <p>The number of Global Accelerator objects that you want to return with this call. The default value is 10.</p>
+     * @public
      */
     MaxResults?: number;
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2137,13 +2137,13 @@ export interface ListAcceleratorsRequest {
  */
 export interface ListAcceleratorsResponse {
     /**
-     * @public
      * <p>The list of accelerators for a customer account.</p>
+     * @public
      */
     Accelerators?: Accelerator[];
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2152,14 +2152,14 @@ export interface ListAcceleratorsResponse {
  */
 export interface ListByoipCidrsRequest {
     /**
-     * @public
      * <p>The maximum number of results to return with a single call. To retrieve the remaining results, make
      * 			another call with the returned <code>nextToken</code> value.</p>
+     * @public
      */
     MaxResults?: number;
     /**
-     * @public
      * <p>The token for the next page of results.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2168,13 +2168,13 @@ export interface ListByoipCidrsRequest {
  */
 export interface ListByoipCidrsResponse {
     /**
-     * @public
      * <p>Information about your address ranges.</p>
+     * @public
      */
     ByoipCidrs?: ByoipCidr[];
     /**
-     * @public
      * <p>The token for the next page of results.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2183,13 +2183,13 @@ export interface ListByoipCidrsResponse {
  */
 export interface ListCrossAccountAttachmentsRequest {
     /**
-     * @public
      * <p>The number of cross-account attachment objects that you want to return with this call. The default value is 10.</p>
+     * @public
      */
     MaxResults?: number;
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2198,13 +2198,13 @@ export interface ListCrossAccountAttachmentsRequest {
  */
 export interface ListCrossAccountAttachmentsResponse {
     /**
-     * @public
      * <p>Information about the cross-account attachments.</p>
+     * @public
      */
     CrossAccountAttachments?: Attachment[];
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2218,9 +2218,9 @@ export interface ListCrossAccountResourceAccountsRequest {
  */
 export interface ListCrossAccountResourceAccountsResponse {
     /**
-     * @public
      * <p>The account IDs of principals (resource owners) in a cross-account attachment who can add endpoints (resources) listed
      * 			in the same attachment.</p>
+     * @public
      */
     ResourceOwnerAwsAccountIds?: string[];
 }
@@ -2229,23 +2229,23 @@ export interface ListCrossAccountResourceAccountsResponse {
  */
 export interface ListCrossAccountResourcesRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of an accelerator in a cross-account attachment.</p>
+     * @public
      */
     AcceleratorArn?: string;
     /**
-     * @public
      * <p>The account ID of a resource owner in a cross-account attachment.</p>
+     * @public
      */
     ResourceOwnerAwsAccountId: string | undefined;
     /**
-     * @public
      * <p>The number of cross-account endpoints objects that you want to return with this call. The default value is 10.</p>
+     * @public
      */
     MaxResults?: number;
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2254,13 +2254,13 @@ export interface ListCrossAccountResourcesRequest {
  */
 export interface ListCrossAccountResourcesResponse {
     /**
-     * @public
      * <p>The endpoints attached to an accelerator in a cross-account attachment.</p>
+     * @public
      */
     CrossAccountResources?: CrossAccountResource[];
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2269,13 +2269,13 @@ export interface ListCrossAccountResourcesResponse {
  */
 export interface ListCustomRoutingAcceleratorsRequest {
     /**
-     * @public
      * <p>The number of custom routing Global Accelerator objects that you want to return with this call. The default value is 10.</p>
+     * @public
      */
     MaxResults?: number;
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2284,13 +2284,13 @@ export interface ListCustomRoutingAcceleratorsRequest {
  */
 export interface ListCustomRoutingAcceleratorsResponse {
     /**
-     * @public
      * <p>The list of custom routing accelerators for a customer account.</p>
+     * @public
      */
     Accelerators?: CustomRoutingAccelerator[];
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2299,18 +2299,18 @@ export interface ListCustomRoutingAcceleratorsResponse {
  */
 export interface ListCustomRoutingEndpointGroupsRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the listener to list endpoint groups for.</p>
+     * @public
      */
     ListenerArn: string | undefined;
     /**
-     * @public
      * <p>The number of endpoint group objects that you want to return with this call. The default value is 10.</p>
+     * @public
      */
     MaxResults?: number;
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2319,13 +2319,13 @@ export interface ListCustomRoutingEndpointGroupsRequest {
  */
 export interface ListCustomRoutingEndpointGroupsResponse {
     /**
-     * @public
      * <p>The list of the endpoint groups associated with a listener for a custom routing accelerator.</p>
+     * @public
      */
     EndpointGroups?: CustomRoutingEndpointGroup[];
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2334,18 +2334,18 @@ export interface ListCustomRoutingEndpointGroupsResponse {
  */
 export interface ListCustomRoutingListenersRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the accelerator to list listeners for.</p>
+     * @public
      */
     AcceleratorArn: string | undefined;
     /**
-     * @public
      * <p>The number of listener objects that you want to return with this call. The default value is 10.</p>
+     * @public
      */
     MaxResults?: number;
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2354,13 +2354,13 @@ export interface ListCustomRoutingListenersRequest {
  */
 export interface ListCustomRoutingListenersResponse {
     /**
-     * @public
      * <p>The list of listeners for a custom routing accelerator.</p>
+     * @public
      */
     Listeners?: CustomRoutingListener[];
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2369,63 +2369,63 @@ export interface ListCustomRoutingListenersResponse {
  */
 export interface ListCustomRoutingPortMappingsRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the accelerator to list the custom routing port mappings for.</p>
+     * @public
      */
     AcceleratorArn: string | undefined;
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group to list the custom routing port mappings for.</p>
+     * @public
      */
     EndpointGroupArn?: string;
     /**
-     * @public
      * <p>The number of destination port mappings that you want to return with this call. The default value is 10.</p>
+     * @public
      */
     MaxResults?: number;
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
 /**
- * @public
  * <p>Returns the ports and associated IP addresses and ports of Amazon EC2 instances in your virtual
  * 		    private cloud (VPC) subnets. Custom routing is a port mapping protocol in Global Accelerator that
  * 		    statically associates port ranges with VPC subnets, which allows Global Accelerator to route to
  * 			specific instances and ports within one or more subnets. </p>
+ * @public
  */
 export interface PortMapping {
     /**
-     * @public
      * <p>The accelerator port.</p>
+     * @public
      */
     AcceleratorPort?: number;
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group.</p>
+     * @public
      */
     EndpointGroupArn?: string;
     /**
-     * @public
      * <p>The IP address of the VPC subnet (the subnet ID).</p>
+     * @public
      */
     EndpointId?: string;
     /**
-     * @public
      * <p>The EC2 instance IP address and port number in the virtual private cloud (VPC) subnet.</p>
+     * @public
      */
     DestinationSocketAddress?: SocketAddress;
     /**
-     * @public
      * <p>The protocols supported by the endpoint group.</p>
+     * @public
      */
     Protocols?: CustomRoutingProtocol[];
     /**
-     * @public
      * <p>Indicates whether or not a port mapping destination can receive traffic. The value is either ALLOW, if
      * 			traffic is allowed to the destination, or DENY, if traffic is not allowed to the destination.</p>
+     * @public
      */
     DestinationTrafficState?: CustomRoutingDestinationTrafficState;
 }
@@ -2434,13 +2434,13 @@ export interface PortMapping {
  */
 export interface ListCustomRoutingPortMappingsResponse {
     /**
-     * @public
      * <p>The port mappings for a custom routing accelerator.</p>
+     * @public
      */
     PortMappings?: PortMapping[];
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2449,24 +2449,24 @@ export interface ListCustomRoutingPortMappingsResponse {
  */
 export interface ListCustomRoutingPortMappingsByDestinationRequest {
     /**
-     * @public
      * <p>The ID for the virtual private cloud (VPC) subnet.</p>
+     * @public
      */
     EndpointId: string | undefined;
     /**
-     * @public
      * <p>The endpoint IP address in a virtual private cloud (VPC) subnet for which you want to receive back port
      * 		mappings.</p>
+     * @public
      */
     DestinationAddress: string | undefined;
     /**
-     * @public
      * <p>The number of destination port mappings that you want to return with this call. The default value is 10.</p>
+     * @public
      */
     MaxResults?: number;
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2475,13 +2475,13 @@ export interface ListCustomRoutingPortMappingsByDestinationRequest {
  */
 export interface ListCustomRoutingPortMappingsByDestinationResponse {
     /**
-     * @public
      * <p>The port mappings for the endpoint IP address that you specified in the request.</p>
+     * @public
      */
     DestinationPortMappings?: DestinationPortMapping[];
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2490,18 +2490,18 @@ export interface ListCustomRoutingPortMappingsByDestinationResponse {
  */
 export interface ListEndpointGroupsRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the listener.</p>
+     * @public
      */
     ListenerArn: string | undefined;
     /**
-     * @public
      * <p>The number of endpoint group objects that you want to return with this call. The default value is 10.</p>
+     * @public
      */
     MaxResults?: number;
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2510,13 +2510,13 @@ export interface ListEndpointGroupsRequest {
  */
 export interface ListEndpointGroupsResponse {
     /**
-     * @public
      * <p>The list of the endpoint groups associated with a listener.</p>
+     * @public
      */
     EndpointGroups?: EndpointGroup[];
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2525,18 +2525,18 @@ export interface ListEndpointGroupsResponse {
  */
 export interface ListListenersRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the accelerator for which you want to list listener objects.</p>
+     * @public
      */
     AcceleratorArn: string | undefined;
     /**
-     * @public
      * <p>The number of listener objects that you want to return with this call. The default value is 10.</p>
+     * @public
      */
     MaxResults?: number;
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2545,13 +2545,13 @@ export interface ListListenersRequest {
  */
 export interface ListListenersResponse {
     /**
-     * @public
      * <p>The list of listeners for an accelerator.</p>
+     * @public
      */
     Listeners?: Listener[];
     /**
-     * @public
      * <p>The token for the next set of results. You receive this token from a previous call.</p>
+     * @public
      */
     NextToken?: string;
 }
@@ -2560,8 +2560,8 @@ export interface ListListenersResponse {
  */
 export interface ListTagsForResourceRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the accelerator to list tags for. An ARN uniquely identifies an accelerator.</p>
+     * @public
      */
     ResourceArn: string | undefined;
 }
@@ -2570,8 +2570,8 @@ export interface ListTagsForResourceRequest {
  */
 export interface ListTagsForResourceResponse {
     /**
-     * @public
      * <p>Root level tag for the Tags parameters.</p>
+     * @public
      */
     Tags?: Tag[];
 }
@@ -2580,17 +2580,17 @@ export interface ListTagsForResourceResponse {
  */
 export interface ProvisionByoipCidrRequest {
     /**
-     * @public
      * <p>The public IPv4 address range, in CIDR notation. The most specific IP prefix that you can
      * 			specify is /24. The address range cannot overlap with another address range that you've brought
      * 			to this or another Region.</p>
+     * @public
      */
     Cidr: string | undefined;
     /**
-     * @public
      * <p>A signed document that proves that you are authorized to bring the specified IP address range to
      * 			Amazon using BYOIP.
      * 		</p>
+     * @public
      */
     CidrAuthorizationContext: CidrAuthorizationContext | undefined;
 }
@@ -2599,8 +2599,8 @@ export interface ProvisionByoipCidrRequest {
  */
 export interface ProvisionByoipCidrResponse {
     /**
-     * @public
      * <p>Information about the address range.</p>
+     * @public
      */
     ByoipCidr?: ByoipCidr;
 }
@@ -2609,14 +2609,14 @@ export interface ProvisionByoipCidrResponse {
  */
 export interface RemoveCustomRoutingEndpointsRequest {
     /**
-     * @public
      * <p>The IDs for the endpoints. For custom routing accelerators, endpoint IDs are the virtual private cloud (VPC)
      * 		subnet IDs. </p>
+     * @public
      */
     EndpointIds: string[] | undefined;
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group to remove endpoints from.</p>
+     * @public
      */
     EndpointGroupArn: string | undefined;
 }
@@ -2625,13 +2625,13 @@ export interface RemoveCustomRoutingEndpointsRequest {
  */
 export interface RemoveEndpointsRequest {
     /**
-     * @public
      * <p>The identifiers of the endpoints that you want to remove.</p>
+     * @public
      */
     EndpointIdentifiers: EndpointIdentifier[] | undefined;
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group.</p>
+     * @public
      */
     EndpointGroupArn: string | undefined;
 }
@@ -2640,13 +2640,13 @@ export interface RemoveEndpointsRequest {
  */
 export interface TagResourceRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the Global Accelerator resource to add tags to. An ARN uniquely identifies a resource.</p>
+     * @public
      */
     ResourceArn: string | undefined;
     /**
-     * @public
      * <p>The tags to add to a resource. A tag consists of a key and a value that you define.</p>
+     * @public
      */
     Tags: Tag[] | undefined;
 }
@@ -2660,13 +2660,13 @@ export interface TagResourceResponse {
  */
 export interface UntagResourceRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the Global Accelerator resource to remove tags from. An ARN uniquely identifies a resource.</p>
+     * @public
      */
     ResourceArn: string | undefined;
     /**
-     * @public
      * <p>The tag key pairs that you want to remove from the specified resources.</p>
+     * @public
      */
     TagKeys: string[] | undefined;
 }
@@ -2680,25 +2680,25 @@ export interface UntagResourceResponse {
  */
 export interface UpdateAcceleratorRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the accelerator to update.</p>
+     * @public
      */
     AcceleratorArn: string | undefined;
     /**
-     * @public
      * <p>The name of the accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters,
      * 			periods (.), or hyphens (-), and must not begin or end with a hyphen or period.</p>
+     * @public
      */
     Name?: string;
     /**
-     * @public
      * <p>The IP address type that an accelerator supports. For a standard accelerator, the value can be IPV4 or DUAL_STACK.</p>
+     * @public
      */
     IpAddressType?: IpAddressType;
     /**
-     * @public
      * <p>Indicates whether an accelerator is enabled. The value is true or false. The default value is true. </p>
      *          <p>If the value is set to true, the accelerator cannot be deleted. If set to false, the accelerator can be deleted.</p>
+     * @public
      */
     Enabled?: boolean;
 }
@@ -2707,8 +2707,8 @@ export interface UpdateAcceleratorRequest {
  */
 export interface UpdateAcceleratorResponse {
     /**
-     * @public
      * <p>Information about the updated accelerator.</p>
+     * @public
      */
     Accelerator?: Accelerator;
 }
@@ -2717,32 +2717,32 @@ export interface UpdateAcceleratorResponse {
  */
 export interface UpdateAcceleratorAttributesRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the accelerator that you want to update.</p>
+     * @public
      */
     AcceleratorArn: string | undefined;
     /**
-     * @public
      * <p>Update whether flow logs are enabled. The default value is false. If the value is true,
      * 				<code>FlowLogsS3Bucket</code> and <code>FlowLogsS3Prefix</code> must be specified.</p>
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/monitoring-global-accelerator.flow-logs.html">Flow Logs</a> in
      * 		    the <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     FlowLogsEnabled?: boolean;
     /**
-     * @public
      * <p>The name of the Amazon S3 bucket for the flow logs. Attribute is required if <code>FlowLogsEnabled</code> is
      * 		    <code>true</code>. The bucket must exist and have a bucket policy that grants Global Accelerator permission to write to the
      * 			bucket.</p>
+     * @public
      */
     FlowLogsS3Bucket?: string;
     /**
-     * @public
      * <p>Update the prefix for the location in the Amazon S3 bucket for the flow logs. Attribute is required if
      * 				<code>FlowLogsEnabled</code> is <code>true</code>. </p>
      *          <p>If you specify slash (/) for the S3 bucket prefix, the log file bucket folder structure will include a double slash (//),
      * 			like the following:</p>
      *          <p>s3-bucket_name//AWSLogs/aws_account_id</p>
+     * @public
      */
     FlowLogsS3Prefix?: string;
 }
@@ -2751,8 +2751,8 @@ export interface UpdateAcceleratorAttributesRequest {
  */
 export interface UpdateAcceleratorAttributesResponse {
     /**
-     * @public
      * <p>Updated attributes for the accelerator.</p>
+     * @public
      */
     AcceleratorAttributes?: AcceleratorAttributes;
 }
@@ -2761,41 +2761,41 @@ export interface UpdateAcceleratorAttributesResponse {
  */
 export interface UpdateCrossAccountAttachmentRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the cross-account attachment to update.</p>
+     * @public
      */
     AttachmentArn: string | undefined;
     /**
-     * @public
      * <p>The name of the cross-account attachment.  </p>
+     * @public
      */
     Name?: string;
     /**
-     * @public
      * <p>The principals to add to the cross-account attachment. A principal is an account or the Amazon Resource Name (ARN)
      * 			of an accelerator that the attachment gives permission to add the resources from another account, listed in the attachment.</p>
      *          <p>To add more than one principal, separate the account numbers or accelerator ARNs, or both, with commas.</p>
+     * @public
      */
     AddPrincipals?: string[];
     /**
-     * @public
      * <p>The principals to remove from the cross-account attachment. A principal is an account or the Amazon Resource Name (ARN)
      * 			of an accelerator that is given permission to add the resources from another account, listed in the cross-account attachment.</p>
      *          <p>To remove more than one principal, separate the account numbers or accelerator ARNs, or both, with commas.</p>
+     * @public
      */
     RemovePrincipals?: string[];
     /**
-     * @public
      * <p>The resources to add to the cross-account attachment. A resource listed in a cross-account attachment can be added
      * 			to an accelerator by the principals that are listed in the attachment.</p>
      *          <p>To add more than one resource, separate the resource ARNs with commas.</p>
+     * @public
      */
     AddResources?: Resource[];
     /**
-     * @public
      * <p>The resources to remove from the cross-account attachment. A resource listed in a cross-account attachment can be added
      * 			to an accelerator fy principals that are listed in the cross-account attachment.</p>
      *          <p>To remove more than one resource, separate the resource ARNs with commas.</p>
+     * @public
      */
     RemoveResources?: Resource[];
 }
@@ -2804,8 +2804,8 @@ export interface UpdateCrossAccountAttachmentRequest {
  */
 export interface UpdateCrossAccountAttachmentResponse {
     /**
-     * @public
      * <p>Information about the updated cross-account attachment.</p>
+     * @public
      */
     CrossAccountAttachment?: Attachment;
 }
@@ -2814,25 +2814,25 @@ export interface UpdateCrossAccountAttachmentResponse {
  */
 export interface UpdateCustomRoutingAcceleratorRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the accelerator to update.</p>
+     * @public
      */
     AcceleratorArn: string | undefined;
     /**
-     * @public
      * <p>The name of the accelerator. The name can have a maximum of 64 characters, must contain only alphanumeric characters,
      * 		periods (.), or hyphens (-), and must not begin or end with a hyphen or period.</p>
+     * @public
      */
     Name?: string;
     /**
-     * @public
      * <p>The IP address type that an accelerator supports. For a custom routing accelerator, the value must be IPV4.</p>
+     * @public
      */
     IpAddressType?: IpAddressType;
     /**
-     * @public
      * <p>Indicates whether an accelerator is enabled. The value is true or false. The default value is true. </p>
      *          <p>If the value is set to true, the accelerator cannot be deleted. If set to false, the accelerator can be deleted.</p>
+     * @public
      */
     Enabled?: boolean;
 }
@@ -2841,8 +2841,8 @@ export interface UpdateCustomRoutingAcceleratorRequest {
  */
 export interface UpdateCustomRoutingAcceleratorResponse {
     /**
-     * @public
      * <p>Information about the updated custom routing accelerator.</p>
+     * @public
      */
     Accelerator?: CustomRoutingAccelerator;
 }
@@ -2851,32 +2851,32 @@ export interface UpdateCustomRoutingAcceleratorResponse {
  */
 export interface UpdateCustomRoutingAcceleratorAttributesRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the custom routing accelerator to update attributes for.</p>
+     * @public
      */
     AcceleratorArn: string | undefined;
     /**
-     * @public
      * <p>Update whether flow logs are enabled. The default value is false. If the value is true,
      * 		<code>FlowLogsS3Bucket</code> and <code>FlowLogsS3Prefix</code> must be specified.</p>
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/monitoring-global-accelerator.flow-logs.html">Flow logs</a> in
      * 	    the <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     FlowLogsEnabled?: boolean;
     /**
-     * @public
      * <p>The name of the Amazon S3 bucket for the flow logs. Attribute is required if <code>FlowLogsEnabled</code> is
      * 	    <code>true</code>. The bucket must exist and have a bucket policy that grants Global Accelerator permission to write to the
      * 		bucket.</p>
+     * @public
      */
     FlowLogsS3Bucket?: string;
     /**
-     * @public
      * <p>Update the prefix for the location in the Amazon S3 bucket for the flow logs. Attribute is required if
      * 		<code>FlowLogsEnabled</code> is <code>true</code>. </p>
      *          <p>If you don’t specify a prefix, the flow logs are stored in the
      * 		root of the bucket. If you specify slash (/) for the S3 bucket prefix, the log file bucket folder structure will include a double slash (//), like the following:</p>
      *          <p>DOC-EXAMPLE-BUCKET//AWSLogs/aws_account_id</p>
+     * @public
      */
     FlowLogsS3Prefix?: string;
 }
@@ -2885,8 +2885,8 @@ export interface UpdateCustomRoutingAcceleratorAttributesRequest {
  */
 export interface UpdateCustomRoutingAcceleratorAttributesResponse {
     /**
-     * @public
      * <p>Updated custom routing accelerator.</p>
+     * @public
      */
     AcceleratorAttributes?: CustomRoutingAcceleratorAttributes;
 }
@@ -2895,16 +2895,16 @@ export interface UpdateCustomRoutingAcceleratorAttributesResponse {
  */
 export interface UpdateCustomRoutingListenerRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the listener to update.</p>
+     * @public
      */
     ListenerArn: string | undefined;
     /**
-     * @public
      * <p>The updated port range to support for connections from clients to your accelerator. If you remove ports that are
      * 	currently being used by a subnet endpoint, the call fails.</p>
      *          <p>Separately, you set port ranges for endpoints. For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/about-custom-routing-endpoints.html">About
      * 		endpoints for custom routing accelerators</a>.</p>
+     * @public
      */
     PortRanges: PortRange[] | undefined;
 }
@@ -2913,8 +2913,8 @@ export interface UpdateCustomRoutingListenerRequest {
  */
 export interface UpdateCustomRoutingListenerResponse {
     /**
-     * @public
      * <p>Information for the updated listener for a custom routing accelerator.</p>
+     * @public
      */
     Listener?: CustomRoutingListener;
 }
@@ -2923,62 +2923,62 @@ export interface UpdateCustomRoutingListenerResponse {
  */
 export interface UpdateEndpointGroupRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the endpoint group.</p>
+     * @public
      */
     EndpointGroupArn: string | undefined;
     /**
-     * @public
      * <p>The list of endpoint objects. A resource must be valid and active when you add it as an endpoint.</p>
+     * @public
      */
     EndpointConfigurations?: EndpointConfiguration[];
     /**
-     * @public
      * <p>The percentage of traffic to send to an Amazon Web Services Region. Additional traffic is distributed to other endpoint groups for
      * 			this listener. </p>
      *          <p>Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is
      * 			applied to the traffic that would otherwise have been routed to the Region based on optimal routing.</p>
      *          <p>The default value is 100.</p>
+     * @public
      */
     TrafficDialPercentage?: number;
     /**
-     * @public
      * <p>The port that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port
      * 	        is the listener port that this endpoint group is associated with. If the listener port is a list of ports, Global Accelerator uses
      * 			the first port in the list.</p>
+     * @public
      */
     HealthCheckPort?: number;
     /**
-     * @public
      * <p>The protocol that Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default
      * 			value is TCP.</p>
+     * @public
      */
     HealthCheckProtocol?: HealthCheckProtocol;
     /**
-     * @public
      * <p>If the protocol is HTTP/S, then this specifies the path that is the destination for health check targets. The
      * 			default value is slash (/).</p>
+     * @public
      */
     HealthCheckPath?: string;
     /**
-     * @public
      * <p>The time—10 seconds or 30 seconds—between each health check for an endpoint. The default value is 30.</p>
+     * @public
      */
     HealthCheckIntervalSeconds?: number;
     /**
-     * @public
      * <p>The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an
      * 			unhealthy endpoint to healthy. The default value is 3.</p>
+     * @public
      */
     ThresholdCount?: number;
     /**
-     * @public
      * <p>Override specific listener ports used to route traffic to endpoints that are part of this endpoint group.
      * 			For example, you can create a port override in which the listener
      * 			receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080
      * 			and 1443, respectively, on the endpoints.</p>
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/global-accelerator/latest/dg/about-endpoint-groups-port-override.html">
      * 			Overriding listener ports</a> in the <i>Global Accelerator Developer Guide</i>.</p>
+     * @public
      */
     PortOverrides?: PortOverride[];
 }
@@ -2987,8 +2987,8 @@ export interface UpdateEndpointGroupRequest {
  */
 export interface UpdateEndpointGroupResponse {
     /**
-     * @public
      * <p>The information about the endpoint group that was updated.</p>
+     * @public
      */
     EndpointGroup?: EndpointGroup;
 }
@@ -2997,22 +2997,21 @@ export interface UpdateEndpointGroupResponse {
  */
 export interface UpdateListenerRequest {
     /**
-     * @public
      * <p>The Amazon Resource Name (ARN) of the listener to update.</p>
+     * @public
      */
     ListenerArn: string | undefined;
     /**
-     * @public
      * <p>The updated list of port ranges for the connections from clients to the accelerator.</p>
+     * @public
      */
     PortRanges?: PortRange[];
     /**
-     * @public
      * <p>The updated protocol for the connections from clients to the accelerator.</p>
+     * @public
      */
     Protocol?: Protocol;
     /**
-     * @public
      * <p>Client affinity lets you direct all requests from a user to the same endpoint, if you have stateful applications,
      * 			regardless of the port and protocol of the client request. Client affinity gives you control over whether to always
      * 			route each client to the same specific endpoint.</p>
@@ -3025,6 +3024,7 @@ export interface UpdateListenerRequest {
      * 		    instead. When you use the <code>SOURCE_IP</code> setting, Global Accelerator uses the "two-tuple" (2-tuple) properties—
      * 			source (client) IP address and destination IP address—to select the hash value.</p>
      *          <p>The default value is <code>NONE</code>.</p>
+     * @public
      */
     ClientAffinity?: ClientAffinity;
 }
@@ -3033,8 +3033,8 @@ export interface UpdateListenerRequest {
  */
 export interface UpdateListenerResponse {
     /**
-     * @public
      * <p>Information for the updated listener.</p>
+     * @public
      */
     Listener?: Listener;
 }
@@ -3043,8 +3043,8 @@ export interface UpdateListenerResponse {
  */
 export interface WithdrawByoipCidrRequest {
     /**
-     * @public
      * <p>The address range, in CIDR notation.</p>
+     * @public
      */
     Cidr: string | undefined;
 }
@@ -3053,8 +3053,8 @@ export interface WithdrawByoipCidrRequest {
  */
 export interface WithdrawByoipCidrResponse {
     /**
-     * @public
      * <p>Information about the address pool.</p>
+     * @public
      */
     ByoipCidr?: ByoipCidr;
 }