@aws-sdk/client-firehose 3.379.1 → 3.385.0

package/dist-types/models/models_0.d.ts

@@ -7,11 +7,13 @@ import { FirehoseServiceException as __BaseException } from "./FirehoseServiceEx
  */
 export interface AmazonOpenSearchServerlessBufferingHints {
     /**
+     * @public
      * <p>Buffer incoming data for the specified period of time, in seconds, before delivering it
      *          to the destination. The default value is 300 (5 minutes).</p>
      */
     IntervalInSeconds?: number;
     /**
+     * @public
      * <p>Buffer incoming data to the specified size, in MBs, before delivering it to the
      *          destination. The default value is 5. </p>
      *          <p>We recommend setting this parameter to a value greater than the amount of data you
@@ -26,15 +28,18 @@ export interface AmazonOpenSearchServerlessBufferingHints {
  */
 export interface CloudWatchLoggingOptions {
     /**
+     * @public
      * <p>Enables or disables CloudWatch logging.</p>
      */
     Enabled?: boolean;
     /**
+     * @public
      * <p>The CloudWatch group name for logging. This value is required if CloudWatch logging
      *          is enabled.</p>
      */
     LogGroupName?: string;
     /**
+     * @public
      * <p>The CloudWatch log stream name for logging. This value is required if CloudWatch
      *          logging is enabled.</p>
      */
@@ -65,6 +70,7 @@ export type ProcessorParameterName = (typeof ProcessorParameterName)[keyof typeo
  */
 export interface ProcessorParameter {
     /**
+     * @public
      * <p>The name of the parameter. Currently the following default values are supported: 3
      *          for <code>NumberOfRetries</code> and 60 for the <code>BufferIntervalInSeconds</code>. The
      *             <code>BufferSizeInMBs</code> ranges between 0.2 MB and up to 3MB. The default buffering
@@ -73,6 +79,7 @@ export interface ProcessorParameter {
      */
     ParameterName: ProcessorParameterName | string | undefined;
     /**
+     * @public
      * <p>The parameter value.</p>
      */
     ParameterValue: string | undefined;
@@ -97,10 +104,12 @@ export type ProcessorType = (typeof ProcessorType)[keyof typeof ProcessorType];
  */
 export interface Processor {
     /**
+     * @public
      * <p>The type of processor.</p>
      */
     Type: ProcessorType | string | undefined;
     /**
+     * @public
      * <p>The processor parameters.</p>
      */
     Parameters?: ProcessorParameter[];
@@ -111,10 +120,12 @@ export interface Processor {
  */
 export interface ProcessingConfiguration {
     /**
+     * @public
      * <p>Enables or disables data processing.</p>
      */
     Enabled?: boolean;
     /**
+     * @public
      * <p>The data processors.</p>
      */
     Processors?: Processor[];
@@ -126,6 +137,7 @@ export interface ProcessingConfiguration {
  */
 export interface AmazonOpenSearchServerlessRetryOptions {
     /**
+     * @public
      * <p>After an initial failure to deliver to the Serverless offering for Amazon OpenSearch
      *          Service, the total amount of time during which Kinesis Data Firehose retries delivery
      *          (including the first attempt). After this time has elapsed, the failed documents are
@@ -156,6 +168,7 @@ export type AmazonOpenSearchServerlessS3BackupMode = (typeof AmazonOpenSearchSer
  */
 export interface BufferingHints {
     /**
+     * @public
      * <p>Buffer incoming data to the specified size, in MiBs, before delivering it to the
      *          destination. The default value is 5. This parameter is optional but if you specify a value
      *          for it, you must also specify a value for <code>IntervalInSeconds</code>, and vice
@@ -166,6 +179,7 @@ export interface BufferingHints {
      */
     SizeInMBs?: number;
     /**
+     * @public
      * <p>Buffer incoming data for the specified period of time, in seconds, before delivering
      *          it to the destination. The default value is 300. This parameter is optional but if you
      *          specify a value for it, you must also specify a value for <code>SizeInMBs</code>, and vice
@@ -194,6 +208,7 @@ export type CompressionFormat = (typeof CompressionFormat)[keyof typeof Compress
  */
 export interface KMSEncryptionConfig {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the encryption key. Must belong to the same Amazon Web Services Region as the destination Amazon S3 bucket. For more information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon
      *             Resource Names (ARNs) and Amazon Web Services Service Namespaces</a>.</p>
      */
@@ -216,11 +231,13 @@ export type NoEncryptionConfig = (typeof NoEncryptionConfig)[keyof typeof NoEncr
  */
 export interface EncryptionConfiguration {
     /**
+     * @public
      * <p>Specifically override existing encryption information to ensure that no encryption is
      *          used.</p>
      */
     NoEncryptionConfig?: NoEncryptionConfig | string;
     /**
+     * @public
      * <p>The encryption key.</p>
      */
     KMSEncryptionConfig?: KMSEncryptionConfig;
@@ -231,23 +248,27 @@ export interface EncryptionConfiguration {
  */
 export interface S3DestinationConfiguration {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more
      *          information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
      *                Amazon Web Services Service Namespaces</a>.</p>
      */
     RoleARN: string | undefined;
     /**
+     * @public
      * <p>The ARN of the S3 bucket. For more information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
      *                Amazon Web Services Service Namespaces</a>.</p>
      */
     BucketARN: string | undefined;
     /**
+     * @public
      * <p>The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3
      *          files. You can also specify a custom prefix, as described in <a href="https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html">Custom Prefixes for Amazon S3
      *          Objects</a>.</p>
      */
     Prefix?: string;
     /**
+     * @public
      * <p>A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing
      *          them to S3. This prefix appears immediately following the bucket name. For information
      *          about how to specify this prefix, see <a href="https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html">Custom Prefixes for Amazon S3
@@ -255,11 +276,13 @@ export interface S3DestinationConfiguration {
      */
     ErrorOutputPrefix?: string;
     /**
+     * @public
      * <p>The buffering option. If no value is specified, <code>BufferingHints</code> object
      *          default values are used.</p>
      */
     BufferingHints?: BufferingHints;
     /**
+     * @public
      * <p>The compression format. If no value is specified, the default is
      *             <code>UNCOMPRESSED</code>.</p>
      *          <p>The compression formats <code>SNAPPY</code> or <code>ZIP</code> cannot be specified
@@ -268,11 +291,13 @@ export interface S3DestinationConfiguration {
      */
     CompressionFormat?: CompressionFormat | string;
     /**
+     * @public
      * <p>The encryption configuration. If no value is specified, the default is no
      *          encryption.</p>
      */
     EncryptionConfiguration?: EncryptionConfiguration;
     /**
+     * @public
      * <p>The CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
@@ -283,6 +308,7 @@ export interface S3DestinationConfiguration {
  */
 export interface VpcConfiguration {
     /**
+     * @public
      * <p>The IDs of the subnets that you want Kinesis Data Firehose to use to create ENIs in the
      *          VPC of the Amazon ES destination. Make sure that the routing tables and inbound and
      *          outbound rules allow traffic to flow from the subnets whose IDs are specified here to the
@@ -299,6 +325,7 @@ export interface VpcConfiguration {
      */
     SubnetIds: string[] | undefined;
     /**
+     * @public
      * <p>The ARN of the IAM role that you want the delivery stream to use to create endpoints in
      *          the destination VPC. You can use your existing Kinesis Data Firehose delivery role or you
      *          can specify a new role. In either case, make sure that the role trusts the Kinesis Data
@@ -351,6 +378,7 @@ export interface VpcConfiguration {
      */
     RoleARN: string | undefined;
     /**
+     * @public
      * <p>The IDs of the security groups that you want Kinesis Data Firehose to use when it
      *          creates ENIs in the VPC of the Amazon ES destination. You can use the same security group
      *          that the Amazon ES domain uses or different ones. If you specify different security groups
@@ -370,32 +398,38 @@ export interface VpcConfiguration {
  */
 export interface AmazonOpenSearchServerlessDestinationConfiguration {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the IAM role to be assumed by Kinesis Data Firehose
      *          for calling the Serverless offering for Amazon OpenSearch Service Configuration API and for
      *          indexing documents.</p>
      */
     RoleARN: string | undefined;
     /**
+     * @public
      * <p>The endpoint to use when communicating with the collection in the Serverless offering
      *          for Amazon OpenSearch Service.</p>
      */
     CollectionEndpoint?: string;
     /**
+     * @public
      * <p>The Serverless offering for Amazon OpenSearch Service index name.</p>
      */
     IndexName: string | undefined;
     /**
+     * @public
      * <p>The buffering options. If no value is specified, the default values for
      *          AmazonopensearchserviceBufferingHints are used.</p>
      */
     BufferingHints?: AmazonOpenSearchServerlessBufferingHints;
     /**
+     * @public
      * <p>The retry behavior in case Kinesis Data Firehose is unable to deliver documents to the
      *          Serverless offering for Amazon OpenSearch Service. The default value is 300 (5
      *          minutes).</p>
      */
     RetryOptions?: AmazonOpenSearchServerlessRetryOptions;
     /**
+     * @public
      * <p>Defines how documents should be delivered to Amazon S3. When it is set to
      *          FailedDocumentsOnly, Kinesis Data Firehose writes any documents that could not be indexed
      *          to the configured Amazon S3 destination, with AmazonOpenSearchService-failed/ appended to
@@ -405,18 +439,22 @@ export interface AmazonOpenSearchServerlessDestinationConfiguration {
      */
     S3BackupMode?: AmazonOpenSearchServerlessS3BackupMode | string;
     /**
+     * @public
      * <p>Describes the configuration of a destination in Amazon S3.</p>
      */
     S3Configuration: S3DestinationConfiguration | undefined;
     /**
+     * @public
      * <p>Describes a data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>Describes the Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
     /**
+     * @public
      * <p>The details of the VPC of the Amazon ES destination.</p>
      */
     VpcConfiguration?: VpcConfiguration;
@@ -427,23 +465,27 @@ export interface AmazonOpenSearchServerlessDestinationConfiguration {
  */
 export interface S3DestinationDescription {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more
      *          information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
      *                Amazon Web Services Service Namespaces</a>.</p>
      */
     RoleARN: string | undefined;
     /**
+     * @public
      * <p>The ARN of the S3 bucket. For more information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
      *                Amazon Web Services Service Namespaces</a>.</p>
      */
     BucketARN: string | undefined;
     /**
+     * @public
      * <p>The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3
      *          files. You can also specify a custom prefix, as described in <a href="https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html">Custom Prefixes for Amazon S3
      *          Objects</a>.</p>
      */
     Prefix?: string;
     /**
+     * @public
      * <p>A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing
      *          them to S3. This prefix appears immediately following the bucket name. For information
      *          about how to specify this prefix, see <a href="https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html">Custom Prefixes for Amazon S3
@@ -451,21 +493,25 @@ export interface S3DestinationDescription {
      */
     ErrorOutputPrefix?: string;
     /**
+     * @public
      * <p>The buffering option. If no value is specified, <code>BufferingHints</code> object
      *          default values are used.</p>
      */
     BufferingHints: BufferingHints | undefined;
     /**
+     * @public
      * <p>The compression format. If no value is specified, the default is
      *             <code>UNCOMPRESSED</code>.</p>
      */
     CompressionFormat: CompressionFormat | string | undefined;
     /**
+     * @public
      * <p>The encryption configuration. If no value is specified, the default is no
      *          encryption.</p>
      */
     EncryptionConfiguration: EncryptionConfiguration | undefined;
     /**
+     * @public
      * <p>The Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
@@ -476,6 +522,7 @@ export interface S3DestinationDescription {
  */
 export interface VpcConfigurationDescription {
     /**
+     * @public
      * <p>The IDs of the subnets that Kinesis Data Firehose uses to create ENIs in the VPC of the
      *          Amazon ES destination. Make sure that the routing tables and inbound and outbound rules
      *          allow traffic to flow from the subnets whose IDs are specified here to the subnets that
@@ -491,6 +538,7 @@ export interface VpcConfigurationDescription {
      */
     SubnetIds: string[] | undefined;
     /**
+     * @public
      * <p>The ARN of the IAM role that the delivery stream uses to create endpoints in the
      *          destination VPC. You can use your existing Kinesis Data Firehose delivery role or you can
      *          specify a new role. In either case, make sure that the role trusts the Kinesis Data
@@ -543,6 +591,7 @@ export interface VpcConfigurationDescription {
      */
     RoleARN: string | undefined;
     /**
+     * @public
      * <p>The IDs of the security groups that Kinesis Data Firehose uses when it creates ENIs in
      *          the VPC of the Amazon ES destination. You can use the same security group that the Amazon
      *          ES domain uses or different ones. If you specify different security groups, ensure that
@@ -555,6 +604,7 @@ export interface VpcConfigurationDescription {
      */
     SecurityGroupIds: string[] | undefined;
     /**
+     * @public
      * <p>The ID of the Amazon ES destination's VPC.</p>
      */
     VpcId: string | undefined;
@@ -566,43 +616,53 @@ export interface VpcConfigurationDescription {
  */
 export interface AmazonOpenSearchServerlessDestinationDescription {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the AWS credentials.</p>
      */
     RoleARN?: string;
     /**
+     * @public
      * <p>The endpoint to use when communicating with the collection in the Serverless offering
      *          for Amazon OpenSearch Service.</p>
      */
     CollectionEndpoint?: string;
     /**
+     * @public
      * <p>The Serverless offering for Amazon OpenSearch Service index name.</p>
      */
     IndexName?: string;
     /**
+     * @public
      * <p>The buffering options.</p>
      */
     BufferingHints?: AmazonOpenSearchServerlessBufferingHints;
     /**
+     * @public
      * <p>The Serverless offering for Amazon OpenSearch Service retry options.</p>
      */
     RetryOptions?: AmazonOpenSearchServerlessRetryOptions;
     /**
+     * @public
      * <p>The Amazon S3 backup mode.</p>
      */
     S3BackupMode?: AmazonOpenSearchServerlessS3BackupMode | string;
     /**
+     * @public
      * <p>Describes a destination in Amazon S3.</p>
      */
     S3DestinationDescription?: S3DestinationDescription;
     /**
+     * @public
      * <p>Describes a data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>Describes the Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
     /**
+     * @public
      * <p>The details of the VPC of the Amazon ES destination.</p>
      */
     VpcConfigurationDescription?: VpcConfigurationDescription;
@@ -613,23 +673,27 @@ export interface AmazonOpenSearchServerlessDestinationDescription {
  */
 export interface S3DestinationUpdate {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more
      *          information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
      *                Amazon Web Services Service Namespaces</a>.</p>
      */
     RoleARN?: string;
     /**
+     * @public
      * <p>The ARN of the S3 bucket. For more information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
      *                Amazon Web Services Service Namespaces</a>.</p>
      */
     BucketARN?: string;
     /**
+     * @public
      * <p>The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3
      *          files. You can also specify a custom prefix, as described in <a href="https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html">Custom Prefixes for Amazon S3
      *          Objects</a>.</p>
      */
     Prefix?: string;
     /**
+     * @public
      * <p>A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing
      *          them to S3. This prefix appears immediately following the bucket name. For information
      *          about how to specify this prefix, see <a href="https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html">Custom Prefixes for Amazon S3
@@ -637,11 +701,13 @@ export interface S3DestinationUpdate {
      */
     ErrorOutputPrefix?: string;
     /**
+     * @public
      * <p>The buffering option. If no value is specified, <code>BufferingHints</code> object
      *          default values are used.</p>
      */
     BufferingHints?: BufferingHints;
     /**
+     * @public
      * <p>The compression format. If no value is specified, the default is
      *             <code>UNCOMPRESSED</code>.</p>
      *          <p>The compression formats <code>SNAPPY</code> or <code>ZIP</code> cannot be specified
@@ -650,11 +716,13 @@ export interface S3DestinationUpdate {
      */
     CompressionFormat?: CompressionFormat | string;
     /**
+     * @public
      * <p>The encryption configuration. If no value is specified, the default is no
      *          encryption.</p>
      */
     EncryptionConfiguration?: EncryptionConfiguration;
     /**
+     * @public
      * <p>The CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
@@ -666,40 +734,48 @@ export interface S3DestinationUpdate {
  */
 export interface AmazonOpenSearchServerlessDestinationUpdate {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the IAM role to be assumed by Kinesis Data Firehose
      *          for calling the Serverless offering for Amazon OpenSearch Service Configuration API and for
      *          indexing documents.</p>
      */
     RoleARN?: string;
     /**
+     * @public
      * <p>The endpoint to use when communicating with the collection in the Serverless offering
      *          for Amazon OpenSearch Service.</p>
      */
     CollectionEndpoint?: string;
     /**
+     * @public
      * <p>The Serverless offering for Amazon OpenSearch Service index name.</p>
      */
     IndexName?: string;
     /**
+     * @public
      * <p>The buffering options. If no value is specified, AmazonopensearchBufferingHints object
      *          default values are used.</p>
      */
     BufferingHints?: AmazonOpenSearchServerlessBufferingHints;
     /**
+     * @public
      * <p>The retry behavior in case Kinesis Data Firehose is unable to deliver documents to the
      *          Serverless offering for Amazon OpenSearch Service. The default value is 300 (5
      *          minutes).</p>
      */
     RetryOptions?: AmazonOpenSearchServerlessRetryOptions;
     /**
+     * @public
      * <p>Describes an update for a destination in Amazon S3.</p>
      */
     S3Update?: S3DestinationUpdate;
     /**
+     * @public
      * <p>Describes a data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>Describes the Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
@@ -711,11 +787,13 @@ export interface AmazonOpenSearchServerlessDestinationUpdate {
  */
 export interface AmazonopensearchserviceBufferingHints {
     /**
+     * @public
      * <p>Buffer incoming data for the specified period of time, in seconds, before delivering it
      *          to the destination. The default value is 300 (5 minutes). </p>
      */
     IntervalInSeconds?: number;
     /**
+     * @public
      * <p>Buffer incoming data to the specified size, in MBs, before delivering it to the
      *          destination. The default value is 5.</p>
      *          <p>We recommend setting this parameter to a value greater than the amount of data you
@@ -746,6 +824,7 @@ export type AmazonopensearchserviceIndexRotationPeriod = (typeof Amazonopensearc
  */
 export interface AmazonopensearchserviceRetryOptions {
     /**
+     * @public
      * <p>After an initial failure to deliver to Amazon OpenSearch Service, the total amount of
      *          time during which Kinesis Data Firehose retries delivery (including the first attempt).
      *          After this time has elapsed, the failed documents are written to Amazon S3. Default value
@@ -771,48 +850,57 @@ export type AmazonopensearchserviceS3BackupMode = (typeof Amazonopensearchservic
  */
 export interface AmazonopensearchserviceDestinationConfiguration {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the IAM role to be assumed by Kinesis Data Firehose
      *          for calling the Amazon OpenSearch Service Configuration API and for indexing
      *          documents.</p>
      */
     RoleARN: string | undefined;
     /**
+     * @public
      * <p>The ARN of the Amazon OpenSearch Service domain. The IAM role must have permissions for
      *          DescribeElasticsearchDomain, DescribeElasticsearchDomains, and
      *          DescribeElasticsearchDomainConfig after assuming the role specified in RoleARN. </p>
      */
     DomainARN?: string;
     /**
+     * @public
      * <p>The endpoint to use when communicating with the cluster. Specify either this
      *          ClusterEndpoint or the DomainARN field. </p>
      */
     ClusterEndpoint?: string;
     /**
+     * @public
      * <p>The ElasticsearAmazon OpenSearch Service index name.</p>
      */
     IndexName: string | undefined;
     /**
+     * @public
      * <p>The Amazon OpenSearch Service type name. For Elasticsearch 6.x, there can be only one
      *          type per index. If you try to specify a new type for an existing index that already has
      *          another type, Kinesis Data Firehose returns an error during run time. </p>
      */
     TypeName?: string;
     /**
+     * @public
      * <p>The Amazon OpenSearch Service index rotation period. Index rotation appends a timestamp
      *          to the IndexName to facilitate the expiration of old data.</p>
      */
     IndexRotationPeriod?: AmazonopensearchserviceIndexRotationPeriod | string;
     /**
+     * @public
      * <p>The buffering options. If no value is specified, the default values for
      *          AmazonopensearchserviceBufferingHints are used. </p>
      */
     BufferingHints?: AmazonopensearchserviceBufferingHints;
     /**
+     * @public
      * <p>The retry behavior in case Kinesis Data Firehose is unable to deliver documents to
      *          Amazon OpenSearch Service. The default value is 300 (5 minutes). </p>
      */
     RetryOptions?: AmazonopensearchserviceRetryOptions;
     /**
+     * @public
      * <p>Defines how documents should be delivered to Amazon S3. When it is set to
      *          FailedDocumentsOnly, Kinesis Data Firehose writes any documents that could not be indexed
      *          to the configured Amazon S3 destination, with AmazonOpenSearchService-failed/ appended to
@@ -822,18 +910,22 @@ export interface AmazonopensearchserviceDestinationConfiguration {
      */
     S3BackupMode?: AmazonopensearchserviceS3BackupMode | string;
     /**
+     * @public
      * <p>Describes the configuration of a destination in Amazon S3.</p>
      */
     S3Configuration: S3DestinationConfiguration | undefined;
     /**
+     * @public
      * <p>Describes a data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>Describes the Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
     /**
+     * @public
      * <p>The details of the VPC of the Amazon ES destination.</p>
      */
     VpcConfiguration?: VpcConfiguration;
@@ -844,57 +936,70 @@ export interface AmazonopensearchserviceDestinationConfiguration {
  */
 export interface AmazonopensearchserviceDestinationDescription {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the Amazon Web Services credentials. </p>
      */
     RoleARN?: string;
     /**
+     * @public
      * <p>The ARN of the Amazon OpenSearch Service domain.</p>
      */
     DomainARN?: string;
     /**
+     * @public
      * <p>The endpoint to use when communicating with the cluster. Kinesis Data Firehose uses
      *          either this ClusterEndpoint or the DomainARN field to send data to Amazon OpenSearch
      *          Service. </p>
      */
     ClusterEndpoint?: string;
     /**
+     * @public
      * <p>The Amazon OpenSearch Service index name.</p>
      */
     IndexName?: string;
     /**
+     * @public
      * <p>The Amazon OpenSearch Service type name. This applies to Elasticsearch 6.x and lower
      *          versions. For Elasticsearch 7.x and OpenSearch Service 1.x, there's no value for TypeName. </p>
      */
     TypeName?: string;
     /**
+     * @public
      * <p>The Amazon OpenSearch Service index rotation period</p>
      */
     IndexRotationPeriod?: AmazonopensearchserviceIndexRotationPeriod | string;
     /**
+     * @public
      * <p>The buffering options.</p>
      */
     BufferingHints?: AmazonopensearchserviceBufferingHints;
     /**
+     * @public
      * <p>The Amazon OpenSearch Service retry options.</p>
      */
     RetryOptions?: AmazonopensearchserviceRetryOptions;
     /**
+     * @public
      * <p>The Amazon S3 backup mode.</p>
      */
     S3BackupMode?: AmazonopensearchserviceS3BackupMode | string;
     /**
+     * @public
      * <p>Describes a destination in Amazon S3.</p>
      */
     S3DestinationDescription?: S3DestinationDescription;
     /**
+     * @public
      * <p>Describes a data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>Describes the Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
     /**
+     * @public
      * <p>The details of the VPC of the Amazon ES destination.</p>
      */
     VpcConfigurationDescription?: VpcConfigurationDescription;
@@ -905,27 +1010,32 @@ export interface AmazonopensearchserviceDestinationDescription {
  */
 export interface AmazonopensearchserviceDestinationUpdate {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the IAM role to be assumed by Kinesis Data Firehose
      *          for calling the Amazon OpenSearch Service Configuration API and for indexing documents.
      *       </p>
      */
     RoleARN?: string;
     /**
+     * @public
      * <p>The ARN of the Amazon OpenSearch Service domain. The IAM role must have permissions for
      *          DescribeDomain, DescribeDomains, and DescribeDomainConfig after assuming the IAM role
      *          specified in RoleARN.</p>
      */
     DomainARN?: string;
     /**
+     * @public
      * <p>The endpoint to use when communicating with the cluster. Specify either this
      *          ClusterEndpoint or the DomainARN field. </p>
      */
     ClusterEndpoint?: string;
     /**
+     * @public
      * <p>The Amazon OpenSearch Service index name.</p>
      */
     IndexName?: string;
     /**
+     * @public
      * <p>The Amazon OpenSearch Service type name. For Elasticsearch 6.x, there can be only one
      *          type per index. If you try to specify a new type for an existing index that already has
      *          another type, Kinesis Data Firehose returns an error during runtime. </p>
@@ -936,29 +1046,35 @@ export interface AmazonopensearchserviceDestinationUpdate {
      */
     TypeName?: string;
     /**
+     * @public
      * <p>The Amazon OpenSearch Service index rotation period. Index rotation appends a timestamp
      *          to IndexName to facilitate the expiration of old data.</p>
      */
     IndexRotationPeriod?: AmazonopensearchserviceIndexRotationPeriod | string;
     /**
+     * @public
      * <p>The buffering options. If no value is specified, AmazonopensearchBufferingHints object
      *          default values are used. </p>
      */
     BufferingHints?: AmazonopensearchserviceBufferingHints;
     /**
+     * @public
      * <p>The retry behavior in case Kinesis Data Firehose is unable to deliver documents to
      *          Amazon OpenSearch Service. The default value is 300 (5 minutes). </p>
      */
     RetryOptions?: AmazonopensearchserviceRetryOptions;
     /**
+     * @public
      * <p>Describes an update for a destination in Amazon S3.</p>
      */
     S3Update?: S3DestinationUpdate;
     /**
+     * @public
      * <p>Describes a data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>Describes the Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
@@ -994,14 +1110,17 @@ export type ContentEncoding = (typeof ContentEncoding)[keyof typeof ContentEncod
  */
 export interface CopyCommand {
     /**
+     * @public
      * <p>The name of the target table. The table must already exist in the database.</p>
      */
     DataTableName: string | undefined;
     /**
+     * @public
      * <p>A comma-separated list of column names.</p>
      */
     DataTableColumns?: string;
     /**
+     * @public
      * <p>Optional parameters to use with the Amazon Redshift <code>COPY</code> command. For
      *          more information, see the "Optional Parameters" section of <a href="https://docs.aws.amazon.com/redshift/latest/dg/r_COPY.html">Amazon Redshift COPY command</a>. Some possible
      *          examples that would apply to Kinesis Data Firehose are as follows:</p>
@@ -1044,11 +1163,13 @@ export type KeyType = (typeof KeyType)[keyof typeof KeyType];
  */
 export interface DeliveryStreamEncryptionConfigurationInput {
     /**
+     * @public
      * <p>If you set <code>KeyType</code> to <code>CUSTOMER_MANAGED_CMK</code>, you must specify
      *          the Amazon Resource Name (ARN) of the CMK. If you set <code>KeyType</code> to <code>Amazon Web Services_OWNED_CMK</code>, Kinesis Data Firehose uses a service-account CMK.</p>
      */
     KeyARN?: string;
     /**
+     * @public
      * <p>Indicates the type of customer master key (CMK) to use for encryption. The default
      *          setting is <code>Amazon Web Services_OWNED_CMK</code>. For more information about CMKs, see
      *             <a href="https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#master_keys">Customer Master Keys (CMKs)</a>. When you invoke <a>CreateDeliveryStream</a> or <a>StartDeliveryStreamEncryption</a> with
@@ -1091,11 +1212,13 @@ export type DeliveryStreamType = (typeof DeliveryStreamType)[keyof typeof Delive
  */
 export interface ElasticsearchBufferingHints {
     /**
+     * @public
      * <p>Buffer incoming data for the specified period of time, in seconds, before delivering
      *          it to the destination. The default value is 300 (5 minutes).</p>
      */
     IntervalInSeconds?: number;
     /**
+     * @public
      * <p>Buffer incoming data to the specified size, in MBs, before delivering it to the
      *          destination. The default value is 5.</p>
      *          <p>We recommend setting this parameter to a value greater than the amount of data you
@@ -1126,6 +1249,7 @@ export type ElasticsearchIndexRotationPeriod = (typeof ElasticsearchIndexRotatio
  */
 export interface ElasticsearchRetryOptions {
     /**
+     * @public
      * <p>After an initial failure to deliver to Amazon ES, the total amount of time during
      *          which Kinesis Data Firehose retries delivery (including the first attempt). After this time
      *          has elapsed, the failed documents are written to Amazon S3. Default value is 300 seconds (5
@@ -1151,6 +1275,7 @@ export type ElasticsearchS3BackupMode = (typeof ElasticsearchS3BackupMode)[keyof
  */
 export interface ElasticsearchDestinationConfiguration {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the IAM role to be assumed by Kinesis Data Firehose
      *          for calling the Amazon ES Configuration API and for indexing documents. For more
      *          information, see <a href="https://docs.aws.amazon.com/firehose/latest/dev/controlling-access.html#using-iam-s3">Grant Kinesis Data
@@ -1159,6 +1284,7 @@ export interface ElasticsearchDestinationConfiguration {
      */
     RoleARN: string | undefined;
     /**
+     * @public
      * <p>The ARN of the Amazon ES domain. The IAM role must have permissions
      *             for <code>DescribeDomain</code>, <code>DescribeDomains</code>, and
      *             <code>DescribeDomainConfig</code> after assuming the role specified in <b>RoleARN</b>. For more information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
@@ -1168,15 +1294,18 @@ export interface ElasticsearchDestinationConfiguration {
      */
     DomainARN?: string;
     /**
+     * @public
      * <p>The endpoint to use when communicating with the cluster. Specify either this
      *             <code>ClusterEndpoint</code> or the <code>DomainARN</code> field.</p>
      */
     ClusterEndpoint?: string;
     /**
+     * @public
      * <p>The Elasticsearch index name.</p>
      */
     IndexName: string | undefined;
     /**
+     * @public
      * <p>The Elasticsearch type name. For Elasticsearch 6.x, there can be only one type per
      *          index. If you try to specify a new type for an existing index that already has another
      *          type, Kinesis Data Firehose returns an error during run time.</p>
@@ -1185,6 +1314,7 @@ export interface ElasticsearchDestinationConfiguration {
      */
     TypeName?: string;
     /**
+     * @public
      * <p>The Elasticsearch index rotation period. Index rotation appends a timestamp to the
      *             <code>IndexName</code> to facilitate the expiration of old data. For more information,
      *          see <a href="https://docs.aws.amazon.com/firehose/latest/dev/basic-deliver.html#es-index-rotation">Index Rotation for the
@@ -1192,16 +1322,19 @@ export interface ElasticsearchDestinationConfiguration {
      */
     IndexRotationPeriod?: ElasticsearchIndexRotationPeriod | string;
     /**
+     * @public
      * <p>The buffering options. If no value is specified, the default values for
      *             <code>ElasticsearchBufferingHints</code> are used.</p>
      */
     BufferingHints?: ElasticsearchBufferingHints;
     /**
+     * @public
      * <p>The retry behavior in case Kinesis Data Firehose is unable to deliver documents to
      *          Amazon ES. The default value is 300 (5 minutes).</p>
      */
     RetryOptions?: ElasticsearchRetryOptions;
     /**
+     * @public
      * <p>Defines how documents should be delivered to Amazon S3. When it is set to
      *             <code>FailedDocumentsOnly</code>, Kinesis Data Firehose writes any documents that could
      *          not be indexed to the configured Amazon S3 destination, with
@@ -1215,18 +1348,22 @@ export interface ElasticsearchDestinationConfiguration {
      */
     S3BackupMode?: ElasticsearchS3BackupMode | string;
     /**
+     * @public
      * <p>The configuration for the backup Amazon S3 location.</p>
      */
     S3Configuration: S3DestinationConfiguration | undefined;
     /**
+     * @public
      * <p>The data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>The Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
     /**
+     * @public
      * <p>The details of the VPC of the Amazon ES destination.</p>
      */
     VpcConfiguration?: VpcConfiguration;
@@ -1240,6 +1377,7 @@ export interface ElasticsearchDestinationConfiguration {
  */
 export interface HiveJsonSerDe {
     /**
+     * @public
      * <p>Indicates how you want Kinesis Data Firehose to parse the date and timestamps that
      *          may be present in your input data JSON. To specify these format strings, follow the pattern
      *          syntax of JodaTime's DateTimeFormat format strings. For more information, see <a href="https://www.joda.org/joda-time/apidocs/org/joda/time/format/DateTimeFormat.html">Class DateTimeFormat</a>. You can also use the special value <code>millis</code> to
@@ -1257,6 +1395,7 @@ export interface HiveJsonSerDe {
  */
 export interface OpenXJsonSerDe {
     /**
+     * @public
      * <p>When set to <code>true</code>, specifies that the names of the keys include dots and
      *          that you want Kinesis Data Firehose to replace them with underscores. This is useful
      *          because Apache Hive does not allow dots in column names. For example, if the JSON contains
@@ -1266,11 +1405,13 @@ export interface OpenXJsonSerDe {
      */
     ConvertDotsInJsonKeysToUnderscores?: boolean;
     /**
+     * @public
      * <p>When set to <code>true</code>, which is the default, Kinesis Data Firehose converts
      *          JSON keys to lowercase before deserializing them.</p>
      */
     CaseInsensitive?: boolean;
     /**
+     * @public
      * <p>Maps column names to JSON keys that aren't identical to the column names. This is
      *          useful when the JSON contains keys that are Hive keywords. For example,
      *             <code>timestamp</code> is a Hive keyword. If you have a JSON key named
@@ -1288,6 +1429,7 @@ export interface OpenXJsonSerDe {
  */
 export interface Deserializer {
     /**
+     * @public
      * <p>The OpenX SerDe. Used by Kinesis Data Firehose for deserializing data, which means
      *          converting it from the JSON format in preparation for serializing it to the Parquet or ORC
      *          format. This is one of two deserializers you can choose, depending on which one offers the
@@ -1295,6 +1437,7 @@ export interface Deserializer {
      */
     OpenXJsonSerDe?: OpenXJsonSerDe;
     /**
+     * @public
      * <p>The native Hive / HCatalog JsonSerDe. Used by Kinesis Data Firehose for deserializing
      *          data, which means converting it from the JSON format in preparation for serializing it to
      *          the Parquet or ORC format. This is one of two deserializers you can choose, depending on
@@ -1309,6 +1452,7 @@ export interface Deserializer {
  */
 export interface InputFormatConfiguration {
     /**
+     * @public
      * <p>Specifies which deserializer to use. You can choose either the Apache Hive JSON SerDe
      *          or the OpenX JSON SerDe. If both are non-null, the server rejects the request.</p>
      */
@@ -1347,28 +1491,33 @@ export type OrcFormatVersion = (typeof OrcFormatVersion)[keyof typeof OrcFormatV
  */
 export interface OrcSerDe {
     /**
+     * @public
      * <p>The number of bytes in each stripe. The default is 64 MiB and the minimum is 8
      *          MiB.</p>
      */
     StripeSizeBytes?: number;
     /**
+     * @public
      * <p>The Hadoop Distributed File System (HDFS) block size. This is useful if you intend to
      *          copy the data from Amazon S3 to HDFS before querying. The default is 256 MiB and the
      *          minimum is 64 MiB. Kinesis Data Firehose uses this value for padding calculations.</p>
      */
     BlockSizeBytes?: number;
     /**
+     * @public
      * <p>The number of rows between index entries. The default is 10,000 and the minimum is
      *          1,000.</p>
      */
     RowIndexStride?: number;
     /**
+     * @public
      * <p>Set this to <code>true</code> to indicate that you want stripes to be padded to the HDFS
      *          block boundaries. This is useful if you intend to copy the data from Amazon S3 to HDFS
      *          before querying. The default is <code>false</code>.</p>
      */
     EnablePadding?: boolean;
     /**
+     * @public
      * <p>A number between 0 and 1 that defines the tolerance for block padding as a decimal
      *          fraction of stripe size. The default value is 0.05, which means 5 percent of stripe
      *          size.</p>
@@ -1381,26 +1530,31 @@ export interface OrcSerDe {
      */
     PaddingTolerance?: number;
     /**
+     * @public
      * <p>The compression code to use over data blocks. The default is <code>SNAPPY</code>.</p>
      */
     Compression?: OrcCompression | string;
     /**
+     * @public
      * <p>The column names for which you want Kinesis Data Firehose to create bloom filters. The
      *          default is <code>null</code>.</p>
      */
     BloomFilterColumns?: string[];
     /**
+     * @public
      * <p>The Bloom filter false positive probability (FPP). The lower the FPP, the bigger the
      *          Bloom filter. The default value is 0.05, the minimum is 0, and the maximum is 1.</p>
      */
     BloomFilterFalsePositiveProbability?: number;
     /**
+     * @public
      * <p>Represents the fraction of the total number of non-null rows. To turn off dictionary
      *          encoding, set this fraction to a number that is less than the number of distinct keys in a
      *          dictionary. To always use dictionary encoding, set this threshold to 1.</p>
      */
     DictionaryKeyThreshold?: number;
     /**
+     * @public
      * <p>The version of the file to write. The possible values are <code>V0_11</code> and
      *             <code>V0_12</code>. The default is <code>V0_12</code>.</p>
      */
@@ -1438,18 +1592,21 @@ export type ParquetWriterVersion = (typeof ParquetWriterVersion)[keyof typeof Pa
  */
 export interface ParquetSerDe {
     /**
+     * @public
      * <p>The Hadoop Distributed File System (HDFS) block size. This is useful if you intend to
      *          copy the data from Amazon S3 to HDFS before querying. The default is 256 MiB and the
      *          minimum is 64 MiB. Kinesis Data Firehose uses this value for padding calculations.</p>
      */
     BlockSizeBytes?: number;
     /**
+     * @public
      * <p>The Parquet page size. Column chunks are divided into pages. A page is conceptually an
      *          indivisible unit (in terms of compression and encoding). The minimum value is 64 KiB and
      *          the default is 1 MiB.</p>
      */
     PageSizeBytes?: number;
     /**
+     * @public
      * <p>The compression code to use over data blocks. The possible values are
      *             <code>UNCOMPRESSED</code>, <code>SNAPPY</code>, and <code>GZIP</code>, with the default
      *          being <code>SNAPPY</code>. Use <code>SNAPPY</code> for higher decompression speed. Use
@@ -1457,15 +1614,18 @@ export interface ParquetSerDe {
      */
     Compression?: ParquetCompression | string;
     /**
+     * @public
      * <p>Indicates whether to enable dictionary compression.</p>
      */
     EnableDictionaryCompression?: boolean;
     /**
+     * @public
      * <p>The maximum amount of padding to apply. This is useful if you intend to copy the data
      *          from Amazon S3 to HDFS before querying. The default is 0.</p>
      */
     MaxPaddingBytes?: number;
     /**
+     * @public
      * <p>Indicates the version of row format to output. The possible values are <code>V1</code>
      *          and <code>V2</code>. The default is <code>V1</code>.</p>
      */
@@ -1479,11 +1639,13 @@ export interface ParquetSerDe {
  */
 export interface Serializer {
     /**
+     * @public
      * <p>A serializer to use for converting data to the Parquet format before storing it in
      *          Amazon S3. For more information, see <a href="https://parquet.apache.org/documentation/latest/">Apache Parquet</a>.</p>
      */
     ParquetSerDe?: ParquetSerDe;
     /**
+     * @public
      * <p>A serializer to use for converting data to the ORC format before storing it in Amazon
      *          S3. For more information, see <a href="https://orc.apache.org/docs/">Apache
      *          ORC</a>.</p>
@@ -1498,6 +1660,7 @@ export interface Serializer {
  */
 export interface OutputFormatConfiguration {
     /**
+     * @public
      * <p>Specifies which serializer to use. You can choose either the ORC SerDe or the Parquet
      *          SerDe. If both are non-null, the server rejects the request.</p>
      */
@@ -1511,6 +1674,7 @@ export interface OutputFormatConfiguration {
  */
 export interface SchemaConfiguration {
     /**
+     * @public
      * <p>The role that Kinesis Data Firehose can use to access Amazon Web Services Glue. This
      *          role must be in the same account you use for Kinesis Data Firehose. Cross-account roles
      *          aren't allowed.</p>
@@ -1522,11 +1686,13 @@ export interface SchemaConfiguration {
      */
     RoleARN?: string;
     /**
+     * @public
      * <p>The ID of the Amazon Web Services Glue Data Catalog. If you don't supply this, the
      *             Amazon Web Services account ID is used by default.</p>
      */
     CatalogId?: string;
     /**
+     * @public
      * <p>Specifies the name of the Amazon Web Services Glue database that contains the schema for
      *          the output data.</p>
      *          <important>
@@ -1537,6 +1703,7 @@ export interface SchemaConfiguration {
      */
     DatabaseName?: string;
     /**
+     * @public
      * <p>Specifies the Amazon Web Services Glue table that contains the column information that
      *          constitutes your data schema.</p>
      *          <important>
@@ -1547,11 +1714,13 @@ export interface SchemaConfiguration {
      */
     TableName?: string;
     /**
+     * @public
      * <p>If you don't specify an Amazon Web Services Region, the default is the current
      *          Region.</p>
      */
     Region?: string;
     /**
+     * @public
      * <p>Specifies the table version for the output data schema. If you don't specify this
      *          version ID, or if you set it to <code>LATEST</code>, Kinesis Data Firehose uses the most
      *          recent version. This means that any updates to the table are automatically picked
@@ -1570,23 +1739,27 @@ export interface SchemaConfiguration {
  */
 export interface DataFormatConversionConfiguration {
     /**
+     * @public
      * <p>Specifies the Amazon Web Services Glue Data Catalog table that contains the column
      *          information. This parameter is required if <code>Enabled</code> is set to true.</p>
      */
     SchemaConfiguration?: SchemaConfiguration;
     /**
+     * @public
      * <p>Specifies the deserializer that you want Kinesis Data Firehose to use to convert the
      *          format of your data from JSON. This parameter is required if <code>Enabled</code> is set to
      *          true.</p>
      */
     InputFormatConfiguration?: InputFormatConfiguration;
     /**
+     * @public
      * <p>Specifies the serializer that you want Kinesis Data Firehose to use to convert the
      *          format of your data to the Parquet or ORC format. This parameter is required if
      *             <code>Enabled</code> is set to true.</p>
      */
     OutputFormatConfiguration?: OutputFormatConfiguration;
     /**
+     * @public
      * <p>Defaults to <code>true</code>. Set it to <code>false</code> if you want to disable
      *          format conversion while preserving the configuration details.</p>
      */
@@ -1599,6 +1772,7 @@ export interface DataFormatConversionConfiguration {
  */
 export interface RetryOptions {
     /**
+     * @public
      * <p>The period of time during which Kinesis Data Firehose retries to deliver data to the
      *          specified Amazon S3 prefix.</p>
      */
@@ -1613,11 +1787,13 @@ export interface RetryOptions {
  */
 export interface DynamicPartitioningConfiguration {
     /**
+     * @public
      * <p>The retry behavior in case Kinesis Data Firehose is unable to deliver data to an Amazon
      *          S3 prefix.</p>
      */
     RetryOptions?: RetryOptions;
     /**
+     * @public
      * <p>Specifies that the dynamic partitioning is enabled for this Kinesis Data Firehose
      *          delivery stream.</p>
      */
@@ -1641,23 +1817,27 @@ export type S3BackupMode = (typeof S3BackupMode)[keyof typeof S3BackupMode];
  */
 export interface ExtendedS3DestinationConfiguration {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more
      *          information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
      *                Amazon Web Services Service Namespaces</a>.</p>
      */
     RoleARN: string | undefined;
     /**
+     * @public
      * <p>The ARN of the S3 bucket. For more information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
      *                Amazon Web Services Service Namespaces</a>.</p>
      */
     BucketARN: string | undefined;
     /**
+     * @public
      * <p>The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3
      *          files. You can also specify a custom prefix, as described in <a href="https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html">Custom Prefixes for Amazon S3
      *          Objects</a>.</p>
      */
     Prefix?: string;
     /**
+     * @public
      * <p>A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing
      *          them to S3. This prefix appears immediately following the bucket name. For information
      *          about how to specify this prefix, see <a href="https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html">Custom Prefixes for Amazon S3
@@ -1665,43 +1845,52 @@ export interface ExtendedS3DestinationConfiguration {
      */
     ErrorOutputPrefix?: string;
     /**
+     * @public
      * <p>The buffering option.</p>
      */
     BufferingHints?: BufferingHints;
     /**
+     * @public
      * <p>The compression format. If no value is specified, the default is
      *          UNCOMPRESSED.</p>
      */
     CompressionFormat?: CompressionFormat | string;
     /**
+     * @public
      * <p>The encryption configuration. If no value is specified, the default is no
      *          encryption.</p>
      */
     EncryptionConfiguration?: EncryptionConfiguration;
     /**
+     * @public
      * <p>The Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
     /**
+     * @public
      * <p>The data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>The Amazon S3 backup mode. After you create a delivery stream, you can update it to
      *          enable Amazon S3 backup if it is disabled. If backup is enabled, you can't update the
      *          delivery stream to disable it. </p>
      */
     S3BackupMode?: S3BackupMode | string;
     /**
+     * @public
      * <p>The configuration for backup in Amazon S3.</p>
      */
     S3BackupConfiguration?: S3DestinationConfiguration;
     /**
+     * @public
      * <p>The serializer, deserializer, and schema for converting data from the JSON format to
      *          the Parquet or ORC format before writing it to Amazon S3.</p>
      */
     DataFormatConversionConfiguration?: DataFormatConversionConfiguration;
     /**
+     * @public
      * <p>The configuration of the dynamic partitioning mechanism that creates smaller data sets
      *          from the streaming data by partitioning it based on partition keys. Currently, dynamic
      *          partitioning is only supported for Amazon S3 destinations.
@@ -1719,6 +1908,7 @@ export interface ExtendedS3DestinationConfiguration {
  */
 export interface HttpEndpointBufferingHints {
     /**
+     * @public
      * <p>Buffer incoming data to the specified size, in MBs, before delivering it to the
      *          destination. The default value is 5. </p>
      *          <p>We recommend setting this parameter to a value greater than the amount of data you
@@ -1727,6 +1917,7 @@ export interface HttpEndpointBufferingHints {
      */
     SizeInMBs?: number;
     /**
+     * @public
      * <p>Buffer incoming data for the specified period of time, in seconds, before delivering it
      *          to the destination. The default value is 300 (5 minutes). </p>
      */
@@ -1739,6 +1930,7 @@ export interface HttpEndpointBufferingHints {
  */
 export interface HttpEndpointConfiguration {
     /**
+     * @public
      * <p>The URL of the HTTP endpoint selected as the destination.</p>
      *          <important>
      *             <p>If you choose an HTTP endpoint as your destination, review and follow the
@@ -1748,10 +1940,12 @@ export interface HttpEndpointConfiguration {
      */
     Url: string | undefined;
     /**
+     * @public
      * <p>The name of the HTTP endpoint selected as the destination.</p>
      */
     Name?: string;
     /**
+     * @public
      * <p>The access key required for Kinesis Firehose to authenticate with the HTTP endpoint
      *          selected as the destination.</p>
      */
@@ -1764,10 +1958,12 @@ export interface HttpEndpointConfiguration {
  */
 export interface HttpEndpointCommonAttribute {
     /**
+     * @public
      * <p>The name of the HTTP endpoint common attribute.</p>
      */
     AttributeName: string | undefined;
     /**
+     * @public
      * <p>The value of the HTTP endpoint common attribute.</p>
      */
     AttributeValue: string | undefined;
@@ -1778,11 +1974,13 @@ export interface HttpEndpointCommonAttribute {
  */
 export interface HttpEndpointRequestConfiguration {
     /**
+     * @public
      * <p>Kinesis Data Firehose uses the content encoding to compress the body of a request before
      *          sending the request to the destination. For more information, see <a href="https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Encoding">Content-Encoding</a> in MDN Web Docs, the official Mozilla documentation.</p>
      */
     ContentEncoding?: ContentEncoding | string;
     /**
+     * @public
      * <p>Describes the metadata sent to the HTTP endpoint destination.</p>
      */
     CommonAttributes?: HttpEndpointCommonAttribute[];
@@ -1795,6 +1993,7 @@ export interface HttpEndpointRequestConfiguration {
  */
 export interface HttpEndpointRetryOptions {
     /**
+     * @public
      * <p>The total amount of time that Kinesis Data Firehose spends on retries. This duration
      *          starts after the initial attempt to send data to the custom destination via HTTPS endpoint
      *          fails. It doesn't include the periods during which Kinesis Data Firehose waits for
@@ -1820,10 +2019,12 @@ export type HttpEndpointS3BackupMode = (typeof HttpEndpointS3BackupMode)[keyof t
  */
 export interface HttpEndpointDestinationConfiguration {
     /**
+     * @public
      * <p>The configuration of the HTTP endpoint selected as the destination.</p>
      */
     EndpointConfiguration: HttpEndpointConfiguration | undefined;
     /**
+     * @public
      * <p>The buffering options that can be used before data is delivered to the specified
      *          destination. Kinesis Data Firehose treats these options as hints, and it might choose to
      *          use more optimal values. The <code>SizeInMBs</code> and <code>IntervalInSeconds</code>
@@ -1832,30 +2033,36 @@ export interface HttpEndpointDestinationConfiguration {
      */
     BufferingHints?: HttpEndpointBufferingHints;
     /**
+     * @public
      * <p>Describes the Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
     /**
+     * @public
      * <p>The configuration of the requeste sent to the HTTP endpoint specified as the
      *          destination.</p>
      */
     RequestConfiguration?: HttpEndpointRequestConfiguration;
     /**
+     * @public
      * <p>Describes a data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>Kinesis Data Firehose uses this IAM role for all the permissions that the delivery
      *          stream needs.</p>
      */
     RoleARN?: string;
     /**
+     * @public
      * <p>Describes the retry behavior in case Kinesis Data Firehose is unable to deliver data to
      *          the specified HTTP endpoint destination, or if it doesn't receive a valid acknowledgment of
      *          receipt from the specified HTTP endpoint destination.</p>
      */
     RetryOptions?: HttpEndpointRetryOptions;
     /**
+     * @public
      * <p>Describes the S3 bucket backup options for the data that Kinesis Data Firehose delivers
      *          to the HTTP endpoint destination. You can back up all documents (<code>AllData</code>) or
      *          only the documents that Kinesis Data Firehose could not deliver to the specified HTTP
@@ -1863,6 +2070,7 @@ export interface HttpEndpointDestinationConfiguration {
      */
     S3BackupMode?: HttpEndpointS3BackupMode | string;
     /**
+     * @public
      * <p>Describes the configuration of a destination in Amazon S3.</p>
      */
     S3Configuration: S3DestinationConfiguration | undefined;
@@ -1874,11 +2082,13 @@ export interface HttpEndpointDestinationConfiguration {
  */
 export interface KinesisStreamSourceConfiguration {
     /**
+     * @public
      * <p>The ARN of the source Kinesis data stream. For more information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html#arn-syntax-kinesis-streams">Amazon
      *             Kinesis Data Streams ARN Format</a>.</p>
      */
     KinesisStreamARN: string | undefined;
     /**
+     * @public
      * <p>The ARN of the role that provides access to the source Kinesis data stream. For more
      *          information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html#arn-syntax-iam">Amazon Web Services
      *             Identity and Access Management (IAM) ARN Format</a>.</p>
@@ -1892,6 +2102,7 @@ export interface KinesisStreamSourceConfiguration {
  */
 export interface RedshiftRetryOptions {
     /**
+     * @public
      * <p>The length of time during which Kinesis Data Firehose retries delivery after a
      *          failure, starting from the initial request and including the first attempt. The default
      *          value is 3600 seconds (60 minutes). Kinesis Data Firehose does not retry if the value of
@@ -1918,33 +2129,40 @@ export type RedshiftS3BackupMode = (typeof RedshiftS3BackupMode)[keyof typeof Re
  */
 export interface RedshiftDestinationConfiguration {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more
      *          information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
      *                Amazon Web Services Service Namespaces</a>.</p>
      */
     RoleARN: string | undefined;
     /**
+     * @public
      * <p>The database connection string.</p>
      */
     ClusterJDBCURL: string | undefined;
     /**
+     * @public
      * <p>The <code>COPY</code> command.</p>
      */
     CopyCommand: CopyCommand | undefined;
     /**
+     * @public
      * <p>The name of the user.</p>
      */
     Username: string | undefined;
     /**
+     * @public
      * <p>The user password.</p>
      */
     Password: string | undefined;
     /**
+     * @public
      * <p>The retry behavior in case Kinesis Data Firehose is unable to deliver documents to
      *          Amazon Redshift. Default value is 3600 (60 minutes).</p>
      */
     RetryOptions?: RedshiftRetryOptions;
     /**
+     * @public
      * <p>The configuration for the intermediate Amazon S3 location from which Amazon Redshift
      *          obtains data. Restrictions are described in the topic for <a>CreateDeliveryStream</a>.</p>
      *          <p>The compression formats <code>SNAPPY</code> or <code>ZIP</code> cannot be specified
@@ -1954,20 +2172,24 @@ export interface RedshiftDestinationConfiguration {
      */
     S3Configuration: S3DestinationConfiguration | undefined;
     /**
+     * @public
      * <p>The data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>The Amazon S3 backup mode. After you create a delivery stream, you can update it to
      *          enable Amazon S3 backup if it is disabled. If backup is enabled, you can't update the
      *          delivery stream to disable it. </p>
      */
     S3BackupMode?: RedshiftS3BackupMode | string;
     /**
+     * @public
      * <p>The configuration for backup in Amazon S3.</p>
      */
     S3BackupConfiguration?: S3DestinationConfiguration;
     /**
+     * @public
      * <p>The CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
@@ -1991,6 +2213,7 @@ export type HECEndpointType = (typeof HECEndpointType)[keyof typeof HECEndpointT
  */
 export interface SplunkRetryOptions {
     /**
+     * @public
      * <p>The total amount of time that Kinesis Data Firehose spends on retries. This duration
      *          starts after the initial attempt to send data to Splunk fails. It doesn't include the
      *          periods during which Kinesis Data Firehose waits for acknowledgment from Splunk after each
@@ -2016,20 +2239,24 @@ export type SplunkS3BackupMode = (typeof SplunkS3BackupMode)[keyof typeof Splunk
  */
 export interface SplunkDestinationConfiguration {
     /**
+     * @public
      * <p>The HTTP Event Collector (HEC) endpoint to which Kinesis Data Firehose sends your
      *          data.</p>
      */
     HECEndpoint: string | undefined;
     /**
+     * @public
      * <p>This type can be either "Raw" or "Event."</p>
      */
     HECEndpointType: HECEndpointType | string | undefined;
     /**
+     * @public
      * <p>This is a GUID that you obtain from your Splunk cluster when you create a new HEC
      *          endpoint.</p>
      */
     HECToken: string | undefined;
     /**
+     * @public
      * <p>The amount of time that Kinesis Data Firehose waits to receive an acknowledgment from
      *          Splunk after it sends it data. At the end of the timeout period, Kinesis Data Firehose
      *          either tries to send the data again or considers it an error, based on your retry
@@ -2037,11 +2264,13 @@ export interface SplunkDestinationConfiguration {
      */
     HECAcknowledgmentTimeoutInSeconds?: number;
     /**
+     * @public
      * <p>The retry behavior in case Kinesis Data Firehose is unable to deliver data to Splunk,
      *          or if it doesn't receive an acknowledgment of receipt from Splunk.</p>
      */
     RetryOptions?: SplunkRetryOptions;
     /**
+     * @public
      * <p>Defines how documents should be delivered to Amazon S3. When set to
      *             <code>FailedEventsOnly</code>, Kinesis Data Firehose writes any data that could not be
      *          indexed to the configured Amazon S3 destination. When set to <code>AllEvents</code>,
@@ -2053,14 +2282,17 @@ export interface SplunkDestinationConfiguration {
      */
     S3BackupMode?: SplunkS3BackupMode | string;
     /**
+     * @public
      * <p>The configuration for the backup Amazon S3 location.</p>
      */
     S3Configuration: S3DestinationConfiguration | undefined;
     /**
+     * @public
      * <p>The data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>The Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
@@ -2072,11 +2304,13 @@ export interface SplunkDestinationConfiguration {
  */
 export interface Tag {
     /**
+     * @public
      * <p>A unique identifier for the tag. Maximum length: 128 characters. Valid characters:
      *          Unicode letters, digits, white space, _ . / = + - % @</p>
      */
     Key: string | undefined;
     /**
+     * @public
      * <p>An optional string, which you can use to describe or define the tag. Maximum length:
      *          256 characters. Valid characters: Unicode letters, digits, white space, _ . / = + - %
      *          @</p>
@@ -2088,6 +2322,7 @@ export interface Tag {
  */
 export interface CreateDeliveryStreamInput {
     /**
+     * @public
      * <p>The name of the delivery stream. This name must be unique per Amazon Web Services
      *          account in the same Amazon Web Services Region. If the delivery streams are in different
      *          accounts or different Regions, you can have multiple delivery streams with the same
@@ -2095,6 +2330,7 @@ export interface CreateDeliveryStreamInput {
      */
     DeliveryStreamName: string | undefined;
     /**
+     * @public
      * <p>The delivery stream type. This parameter can be one of the following
      *          values:</p>
      *          <ul>
@@ -2112,16 +2348,19 @@ export interface CreateDeliveryStreamInput {
      */
     DeliveryStreamType?: DeliveryStreamType | string;
     /**
+     * @public
      * <p>When a Kinesis data stream is used as the source for the delivery stream, a <a>KinesisStreamSourceConfiguration</a> containing the Kinesis data stream Amazon
      *          Resource Name (ARN) and the role ARN for the source stream.</p>
      */
     KinesisStreamSourceConfiguration?: KinesisStreamSourceConfiguration;
     /**
+     * @public
      * <p>Used to specify the type and Amazon Resource Name (ARN) of the KMS key needed for
      *          Server-Side Encryption (SSE).</p>
      */
     DeliveryStreamEncryptionConfigurationInput?: DeliveryStreamEncryptionConfigurationInput;
     /**
+     * @public
      * @deprecated
      *
      * <p>[Deprecated]
@@ -2129,32 +2368,39 @@ export interface CreateDeliveryStreamInput {
      */
     S3DestinationConfiguration?: S3DestinationConfiguration;
     /**
+     * @public
      * <p>The destination in Amazon S3. You can specify only one destination.</p>
      */
     ExtendedS3DestinationConfiguration?: ExtendedS3DestinationConfiguration;
     /**
+     * @public
      * <p>The destination in Amazon Redshift. You can specify only one destination.</p>
      */
     RedshiftDestinationConfiguration?: RedshiftDestinationConfiguration;
     /**
+     * @public
      * <p>The destination in Amazon ES. You can specify only one destination.</p>
      */
     ElasticsearchDestinationConfiguration?: ElasticsearchDestinationConfiguration;
     /**
+     * @public
      * <p>The destination in Amazon OpenSearch Service. You can specify only one
      *          destination.</p>
      */
     AmazonopensearchserviceDestinationConfiguration?: AmazonopensearchserviceDestinationConfiguration;
     /**
+     * @public
      * <p>The destination in Splunk. You can specify only one destination.</p>
      */
     SplunkDestinationConfiguration?: SplunkDestinationConfiguration;
     /**
+     * @public
      * <p>Enables configuring Kinesis Firehose to deliver data to any HTTP endpoint destination.
      *          You can specify only one destination.</p>
      */
     HttpEndpointDestinationConfiguration?: HttpEndpointDestinationConfiguration;
     /**
+     * @public
      * <p>A set of tags to assign to the delivery stream. A tag is a key-value pair that you can
      *          define and assign to Amazon Web Services resources. Tags are metadata. For example, you can
      *          add friendly names and descriptions or other types of information that can help you
@@ -2166,6 +2412,7 @@ export interface CreateDeliveryStreamInput {
      */
     Tags?: Tag[];
     /**
+     * @public
      * <p>The destination in the Serverless offering for Amazon OpenSearch Service. You can
      *          specify only one destination.</p>
      */
@@ -2176,6 +2423,7 @@ export interface CreateDeliveryStreamInput {
  */
 export interface CreateDeliveryStreamOutput {
     /**
+     * @public
      * <p>The ARN of the delivery stream.</p>
      */
     DeliveryStreamARN?: string;
@@ -2238,10 +2486,12 @@ export declare class ResourceInUseException extends __BaseException {
  */
 export interface DeleteDeliveryStreamInput {
     /**
+     * @public
      * <p>The name of the delivery stream.</p>
      */
     DeliveryStreamName: string | undefined;
     /**
+     * @public
      * <p>Set this to true if you want to delete the delivery stream even if Kinesis Data Firehose
      *          is unable to retire the grant for the CMK. Kinesis Data Firehose might be unable to retire
      *          the grant due to a customer error, such as when the CMK or the grant are in an invalid
@@ -2303,10 +2553,12 @@ export type DeliveryStreamFailureType = (typeof DeliveryStreamFailureType)[keyof
  */
 export interface FailureDescription {
     /**
+     * @public
      * <p>The type of error that caused the failure.</p>
      */
     Type: DeliveryStreamFailureType | string | undefined;
     /**
+     * @public
      * <p>A message providing details about the error that caused the failure.</p>
      */
     Details: string | undefined;
@@ -2335,18 +2587,21 @@ export type DeliveryStreamEncryptionStatus = (typeof DeliveryStreamEncryptionSta
  */
 export interface DeliveryStreamEncryptionConfiguration {
     /**
+     * @public
      * <p>If <code>KeyType</code> is <code>CUSTOMER_MANAGED_CMK</code>, this field contains the
      *          ARN of the customer managed CMK. If <code>KeyType</code> is <code>Amazon Web Services_OWNED_CMK</code>, <code>DeliveryStreamEncryptionConfiguration</code> doesn't contain
      *          a value for <code>KeyARN</code>.</p>
      */
     KeyARN?: string;
     /**
+     * @public
      * <p>Indicates the type of customer master key (CMK) that is used for encryption. The default
      *          setting is <code>Amazon Web Services_OWNED_CMK</code>. For more information about CMKs, see
      *             <a href="https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#master_keys">Customer Master Keys (CMKs)</a>.</p>
      */
     KeyType?: KeyType | string;
     /**
+     * @public
      * <p>This is the server-side encryption (SSE) status for the delivery stream. For a full
      *          description of the different values of this status, see <a>StartDeliveryStreamEncryption</a> and <a>StopDeliveryStreamEncryption</a>. If this status is <code>ENABLING_FAILED</code>
      *          or <code>DISABLING_FAILED</code>, it is the status of the most recent attempt to enable or
@@ -2354,6 +2609,7 @@ export interface DeliveryStreamEncryptionConfiguration {
      */
     Status?: DeliveryStreamEncryptionStatus | string;
     /**
+     * @public
      * <p>Provides details in case one of the following operations fails due to an error related
      *          to KMS: <a>CreateDeliveryStream</a>, <a>DeleteDeliveryStream</a>,
      *             <a>StartDeliveryStreamEncryption</a>, <a>StopDeliveryStreamEncryption</a>.</p>
@@ -2381,12 +2637,14 @@ export type DeliveryStreamStatus = (typeof DeliveryStreamStatus)[keyof typeof De
  */
 export interface ElasticsearchDestinationDescription {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more
      *          information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
      *                Amazon Web Services Service Namespaces</a>.</p>
      */
     RoleARN?: string;
     /**
+     * @public
      * <p>The ARN of the Amazon ES domain. For more information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon
      *             Resource Names (ARNs) and Amazon Web Services Service Namespaces</a>.</p>
      *
@@ -2395,50 +2653,61 @@ export interface ElasticsearchDestinationDescription {
      */
     DomainARN?: string;
     /**
+     * @public
      * <p>The endpoint to use when communicating with the cluster. Kinesis Data Firehose uses
      *          either this <code>ClusterEndpoint</code> or the <code>DomainARN</code> field to send data
      *          to Amazon ES.</p>
      */
     ClusterEndpoint?: string;
     /**
+     * @public
      * <p>The Elasticsearch index name.</p>
      */
     IndexName?: string;
     /**
+     * @public
      * <p>The Elasticsearch type name. This applies to Elasticsearch 6.x and lower versions.
      *          For Elasticsearch 7.x and OpenSearch Service 1.x, there's no value for
      *             <code>TypeName</code>.</p>
      */
     TypeName?: string;
     /**
+     * @public
      * <p>The Elasticsearch index rotation period</p>
      */
     IndexRotationPeriod?: ElasticsearchIndexRotationPeriod | string;
     /**
+     * @public
      * <p>The buffering options.</p>
      */
     BufferingHints?: ElasticsearchBufferingHints;
     /**
+     * @public
      * <p>The Amazon ES retry options.</p>
      */
     RetryOptions?: ElasticsearchRetryOptions;
     /**
+     * @public
      * <p>The Amazon S3 backup mode.</p>
      */
     S3BackupMode?: ElasticsearchS3BackupMode | string;
     /**
+     * @public
      * <p>The Amazon S3 destination.</p>
      */
     S3DestinationDescription?: S3DestinationDescription;
     /**
+     * @public
      * <p>The data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>The Amazon CloudWatch logging options.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
     /**
+     * @public
      * <p>The details of the VPC of the Amazon ES destination.</p>
      */
     VpcConfigurationDescription?: VpcConfigurationDescription;
@@ -2449,23 +2718,27 @@ export interface ElasticsearchDestinationDescription {
  */
 export interface ExtendedS3DestinationDescription {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more
      *          information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
      *                Amazon Web Services Service Namespaces</a>.</p>
      */
     RoleARN: string | undefined;
     /**
+     * @public
      * <p>The ARN of the S3 bucket. For more information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
      *                Amazon Web Services Service Namespaces</a>.</p>
      */
     BucketARN: string | undefined;
     /**
+     * @public
      * <p>The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3
      *          files. You can also specify a custom prefix, as described in <a href="https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html">Custom Prefixes for Amazon S3
      *          Objects</a>.</p>
      */
     Prefix?: string;
     /**
+     * @public
      * <p>A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing
      *          them to S3. This prefix appears immediately following the bucket name. For information
      *          about how to specify this prefix, see <a href="https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html">Custom Prefixes for Amazon S3
@@ -2473,41 +2746,50 @@ export interface ExtendedS3DestinationDescription {
      */
     ErrorOutputPrefix?: string;
     /**
+     * @public
      * <p>The buffering option.</p>
      */
     BufferingHints: BufferingHints | undefined;
     /**
+     * @public
      * <p>The compression format. If no value is specified, the default is
      *             <code>UNCOMPRESSED</code>.</p>
      */
     CompressionFormat: CompressionFormat | string | undefined;
     /**
+     * @public
      * <p>The encryption configuration. If no value is specified, the default is no
      *          encryption.</p>
      */
     EncryptionConfiguration: EncryptionConfiguration | undefined;
     /**
+     * @public
      * <p>The Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
     /**
+     * @public
      * <p>The data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>The Amazon S3 backup mode.</p>
      */
     S3BackupMode?: S3BackupMode | string;
     /**
+     * @public
      * <p>The configuration for backup in Amazon S3.</p>
      */
     S3BackupDescription?: S3DestinationDescription;
     /**
+     * @public
      * <p>The serializer, deserializer, and schema for converting data from the JSON format to
      *          the Parquet or ORC format before writing it to Amazon S3.</p>
      */
     DataFormatConversionConfiguration?: DataFormatConversionConfiguration;
     /**
+     * @public
      * <p>The configuration of the dynamic partitioning mechanism that creates smaller data sets
      *          from the streaming data by partitioning it based on partition keys. Currently, dynamic
      *          partitioning is only supported for Amazon S3 destinations.
@@ -2521,10 +2803,12 @@ export interface ExtendedS3DestinationDescription {
  */
 export interface HttpEndpointDescription {
     /**
+     * @public
      * <p>The URL of the HTTP endpoint selected as the destination.</p>
      */
     Url?: string;
     /**
+     * @public
      * <p>The name of the HTTP endpoint selected as the destination.</p>
      */
     Name?: string;
@@ -2535,10 +2819,12 @@ export interface HttpEndpointDescription {
  */
 export interface HttpEndpointDestinationDescription {
     /**
+     * @public
      * <p>The configuration of the specified HTTP endpoint destination.</p>
      */
     EndpointConfiguration?: HttpEndpointDescription;
     /**
+     * @public
      * <p>Describes buffering options that can be applied to the data before it is delivered to
      *          the HTTPS endpoint destination. Kinesis Data Firehose teats these options as hints, and it
      *          might choose to use more optimal values. The <code>SizeInMBs</code> and
@@ -2547,30 +2833,36 @@ export interface HttpEndpointDestinationDescription {
      */
     BufferingHints?: HttpEndpointBufferingHints;
     /**
+     * @public
      * <p>Describes the Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
     /**
+     * @public
      * <p>The configuration of request sent to the HTTP endpoint specified as the
      *          destination.</p>
      */
     RequestConfiguration?: HttpEndpointRequestConfiguration;
     /**
+     * @public
      * <p>Describes a data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>Kinesis Data Firehose uses this IAM role for all the permissions that the delivery
      *          stream needs.</p>
      */
     RoleARN?: string;
     /**
+     * @public
      * <p>Describes the retry behavior in case Kinesis Data Firehose is unable to deliver data to
      *          the specified HTTP endpoint destination, or if it doesn't receive a valid acknowledgment of
      *          receipt from the specified HTTP endpoint destination.</p>
      */
     RetryOptions?: HttpEndpointRetryOptions;
     /**
+     * @public
      * <p>Describes the S3 bucket backup options for the data that Kinesis Firehose delivers to
      *          the HTTP endpoint destination. You can back up all documents (<code>AllData</code>) or only
      *          the documents that Kinesis Data Firehose could not deliver to the specified HTTP endpoint
@@ -2578,6 +2870,7 @@ export interface HttpEndpointDestinationDescription {
      */
     S3BackupMode?: HttpEndpointS3BackupMode | string;
     /**
+     * @public
      * <p>Describes a destination in Amazon S3.</p>
      */
     S3DestinationDescription?: S3DestinationDescription;
@@ -2588,45 +2881,55 @@ export interface HttpEndpointDestinationDescription {
  */
 export interface RedshiftDestinationDescription {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more
      *          information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
      *                Amazon Web Services Service Namespaces</a>.</p>
      */
     RoleARN: string | undefined;
     /**
+     * @public
      * <p>The database connection string.</p>
      */
     ClusterJDBCURL: string | undefined;
     /**
+     * @public
      * <p>The <code>COPY</code> command.</p>
      */
     CopyCommand: CopyCommand | undefined;
     /**
+     * @public
      * <p>The name of the user.</p>
      */
     Username: string | undefined;
     /**
+     * @public
      * <p>The retry behavior in case Kinesis Data Firehose is unable to deliver documents to
      *          Amazon Redshift. Default value is 3600 (60 minutes).</p>
      */
     RetryOptions?: RedshiftRetryOptions;
     /**
+     * @public
      * <p>The Amazon S3 destination.</p>
      */
     S3DestinationDescription: S3DestinationDescription | undefined;
     /**
+     * @public
      * <p>The data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>The Amazon S3 backup mode.</p>
      */
     S3BackupMode?: RedshiftS3BackupMode | string;
     /**
+     * @public
      * <p>The configuration for backup in Amazon S3.</p>
      */
     S3BackupDescription?: S3DestinationDescription;
     /**
+     * @public
      * <p>The Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
@@ -2637,20 +2940,24 @@ export interface RedshiftDestinationDescription {
  */
 export interface SplunkDestinationDescription {
     /**
+     * @public
      * <p>The HTTP Event Collector (HEC) endpoint to which Kinesis Data Firehose sends your
      *          data.</p>
      */
     HECEndpoint?: string;
     /**
+     * @public
      * <p>This type can be either "Raw" or "Event."</p>
      */
     HECEndpointType?: HECEndpointType | string;
     /**
+     * @public
      * <p>A GUID you obtain from your Splunk cluster when you create a new HEC
      *          endpoint.</p>
      */
     HECToken?: string;
     /**
+     * @public
      * <p>The amount of time that Kinesis Data Firehose waits to receive an acknowledgment from
      *          Splunk after it sends it data. At the end of the timeout period, Kinesis Data Firehose
      *          either tries to send the data again or considers it an error, based on your retry
@@ -2658,11 +2965,13 @@ export interface SplunkDestinationDescription {
      */
     HECAcknowledgmentTimeoutInSeconds?: number;
     /**
+     * @public
      * <p>The retry behavior in case Kinesis Data Firehose is unable to deliver data to Splunk
      *          or if it doesn't receive an acknowledgment of receipt from Splunk.</p>
      */
     RetryOptions?: SplunkRetryOptions;
     /**
+     * @public
      * <p>Defines how documents should be delivered to Amazon S3. When set to
      *             <code>FailedDocumentsOnly</code>, Kinesis Data Firehose writes any data that could not
      *          be indexed to the configured Amazon S3 destination. When set to <code>AllDocuments</code>,
@@ -2671,14 +2980,17 @@ export interface SplunkDestinationDescription {
      */
     S3BackupMode?: SplunkS3BackupMode | string;
     /**
+     * @public
      * <p>The Amazon S3 destination.></p>
      */
     S3DestinationDescription?: S3DestinationDescription;
     /**
+     * @public
      * <p>The data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>The Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
@@ -2689,38 +3001,47 @@ export interface SplunkDestinationDescription {
  */
 export interface DestinationDescription {
     /**
+     * @public
      * <p>The ID of the destination.</p>
      */
     DestinationId: string | undefined;
     /**
+     * @public
      * <p>[Deprecated] The destination in Amazon S3.</p>
      */
     S3DestinationDescription?: S3DestinationDescription;
     /**
+     * @public
      * <p>The destination in Amazon S3.</p>
      */
     ExtendedS3DestinationDescription?: ExtendedS3DestinationDescription;
     /**
+     * @public
      * <p>The destination in Amazon Redshift.</p>
      */
     RedshiftDestinationDescription?: RedshiftDestinationDescription;
     /**
+     * @public
      * <p>The destination in Amazon ES.</p>
      */
     ElasticsearchDestinationDescription?: ElasticsearchDestinationDescription;
     /**
+     * @public
      * <p>The destination in Amazon OpenSearch Service.</p>
      */
     AmazonopensearchserviceDestinationDescription?: AmazonopensearchserviceDestinationDescription;
     /**
+     * @public
      * <p>The destination in Splunk.</p>
      */
     SplunkDestinationDescription?: SplunkDestinationDescription;
     /**
+     * @public
      * <p>Describes the specified HTTP endpoint destination.</p>
      */
     HttpEndpointDestinationDescription?: HttpEndpointDestinationDescription;
     /**
+     * @public
      * <p>The destination in the Serverless offering for Amazon OpenSearch Service.</p>
      */
     AmazonOpenSearchServerlessDestinationDescription?: AmazonOpenSearchServerlessDestinationDescription;
@@ -2732,18 +3053,21 @@ export interface DestinationDescription {
  */
 export interface KinesisStreamSourceDescription {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the source Kinesis data stream. For more
      *          information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html#arn-syntax-kinesis-streams">Amazon
      *             Kinesis Data Streams ARN Format</a>.</p>
      */
     KinesisStreamARN?: string;
     /**
+     * @public
      * <p>The ARN of the role used by the source Kinesis data stream. For more information, see
      *             <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html#arn-syntax-iam">Amazon Web Services
      *             Identity and Access Management (IAM) ARN Format</a>.</p>
      */
     RoleARN?: string;
     /**
+     * @public
      * <p>Kinesis Data Firehose starts retrieving records from the Kinesis data stream starting
      *          with this timestamp.</p>
      */
@@ -2756,6 +3080,7 @@ export interface KinesisStreamSourceDescription {
  */
 export interface SourceDescription {
     /**
+     * @public
      * <p>The <a>KinesisStreamSourceDescription</a> value for the source Kinesis
      *          data stream.</p>
      */
@@ -2767,32 +3092,38 @@ export interface SourceDescription {
  */
 export interface DeliveryStreamDescription {
     /**
+     * @public
      * <p>The name of the delivery stream.</p>
      */
     DeliveryStreamName: string | undefined;
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the delivery stream. For more information, see
      *             <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon
      *             Resource Names (ARNs) and Amazon Web Services Service Namespaces</a>.</p>
      */
     DeliveryStreamARN: string | undefined;
     /**
+     * @public
      * <p>The status of the delivery stream. If the status of a delivery stream is
      *             <code>CREATING_FAILED</code>, this status doesn't change, and you can't invoke
      *             <code>CreateDeliveryStream</code> again on it. However, you can invoke the <a>DeleteDeliveryStream</a> operation to delete it.</p>
      */
     DeliveryStreamStatus: DeliveryStreamStatus | string | undefined;
     /**
+     * @public
      * <p>Provides details in case one of the following operations fails due to an error related
      *          to KMS: <a>CreateDeliveryStream</a>, <a>DeleteDeliveryStream</a>,
      *             <a>StartDeliveryStreamEncryption</a>, <a>StopDeliveryStreamEncryption</a>.</p>
      */
     FailureDescription?: FailureDescription;
     /**
+     * @public
      * <p>Indicates the server-side encryption (SSE) status for the delivery stream.</p>
      */
     DeliveryStreamEncryptionConfiguration?: DeliveryStreamEncryptionConfiguration;
     /**
+     * @public
      * <p>The delivery stream type. This can be one of the following values:</p>
      *          <ul>
      *             <li>
@@ -2809,6 +3140,7 @@ export interface DeliveryStreamDescription {
      */
     DeliveryStreamType: DeliveryStreamType | string | undefined;
     /**
+     * @public
      * <p>Each time the destination is updated for a delivery stream, the version ID is
      *          changed, and the current version ID is required when updating the destination. This is so
      *          that the service knows it is applying the changes to the correct version of the delivery
@@ -2816,24 +3148,29 @@ export interface DeliveryStreamDescription {
      */
     VersionId: string | undefined;
     /**
+     * @public
      * <p>The date and time that the delivery stream was created.</p>
      */
     CreateTimestamp?: Date;
     /**
+     * @public
      * <p>The date and time that the delivery stream was last updated.</p>
      */
     LastUpdateTimestamp?: Date;
     /**
+     * @public
      * <p>If the <code>DeliveryStreamType</code> parameter is
      *             <code>KinesisStreamAsSource</code>, a <a>SourceDescription</a> object
      *          describing the source Kinesis data stream.</p>
      */
     Source?: SourceDescription;
     /**
+     * @public
      * <p>The destinations.</p>
      */
     Destinations: DestinationDescription[] | undefined;
     /**
+     * @public
      * <p>Indicates whether there are more destinations available to list.</p>
      */
     HasMoreDestinations: boolean | undefined;
@@ -2843,15 +3180,18 @@ export interface DeliveryStreamDescription {
  */
 export interface DescribeDeliveryStreamInput {
     /**
+     * @public
      * <p>The name of the delivery stream.</p>
      */
     DeliveryStreamName: string | undefined;
     /**
+     * @public
      * <p>The limit on the number of destinations to return. You can have one destination per
      *          delivery stream.</p>
      */
     Limit?: number;
     /**
+     * @public
      * <p>The ID of the destination to start returning the destination information. Kinesis
      *          Data Firehose supports one destination per delivery stream.</p>
      */
@@ -2862,6 +3202,7 @@ export interface DescribeDeliveryStreamInput {
  */
 export interface DescribeDeliveryStreamOutput {
     /**
+     * @public
      * <p>Information about the delivery stream.</p>
      */
     DeliveryStreamDescription: DeliveryStreamDescription | undefined;
@@ -2872,6 +3213,7 @@ export interface DescribeDeliveryStreamOutput {
  */
 export interface ElasticsearchDestinationUpdate {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the IAM role to be assumed by Kinesis Data Firehose
      *          for calling the Amazon ES Configuration API and for indexing documents. For more
      *          information, see <a href="https://docs.aws.amazon.com/firehose/latest/dev/controlling-access.html#using-iam-s3">Grant Kinesis Data
@@ -2880,6 +3222,7 @@ export interface ElasticsearchDestinationUpdate {
      */
     RoleARN?: string;
     /**
+     * @public
      * <p>The ARN of the Amazon ES domain. The IAM role must have permissions
      *             for <code>DescribeDomain</code>, <code>DescribeDomains</code>, and
      *             <code>DescribeDomainConfig</code> after assuming the IAM role specified in
@@ -2890,15 +3233,18 @@ export interface ElasticsearchDestinationUpdate {
      */
     DomainARN?: string;
     /**
+     * @public
      * <p>The endpoint to use when communicating with the cluster. Specify either this
      *             <code>ClusterEndpoint</code> or the <code>DomainARN</code> field.</p>
      */
     ClusterEndpoint?: string;
     /**
+     * @public
      * <p>The Elasticsearch index name.</p>
      */
     IndexName?: string;
     /**
+     * @public
      * <p>The Elasticsearch type name. For Elasticsearch 6.x, there can be only one type per
      *          index. If you try to specify a new type for an existing index that already has another
      *          type, Kinesis Data Firehose returns an error during runtime.</p>
@@ -2910,6 +3256,7 @@ export interface ElasticsearchDestinationUpdate {
      */
     TypeName?: string;
     /**
+     * @public
      * <p>The Elasticsearch index rotation period. Index rotation appends a timestamp to
      *             <code>IndexName</code> to facilitate the expiration of old data. For more information,
      *          see <a href="https://docs.aws.amazon.com/firehose/latest/dev/basic-deliver.html#es-index-rotation">Index Rotation for the
@@ -2917,24 +3264,29 @@ export interface ElasticsearchDestinationUpdate {
      */
     IndexRotationPeriod?: ElasticsearchIndexRotationPeriod | string;
     /**
+     * @public
      * <p>The buffering options. If no value is specified,
      *             <code>ElasticsearchBufferingHints</code> object default values are used. </p>
      */
     BufferingHints?: ElasticsearchBufferingHints;
     /**
+     * @public
      * <p>The retry behavior in case Kinesis Data Firehose is unable to deliver documents to
      *          Amazon ES. The default value is 300 (5 minutes).</p>
      */
     RetryOptions?: ElasticsearchRetryOptions;
     /**
+     * @public
      * <p>The Amazon S3 destination.</p>
      */
     S3Update?: S3DestinationUpdate;
     /**
+     * @public
      * <p>The data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>The CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
@@ -2945,23 +3297,27 @@ export interface ElasticsearchDestinationUpdate {
  */
 export interface ExtendedS3DestinationUpdate {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more
      *          information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
      *                Amazon Web Services Service Namespaces</a>.</p>
      */
     RoleARN?: string;
     /**
+     * @public
      * <p>The ARN of the S3 bucket. For more information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
      *                Amazon Web Services Service Namespaces</a>.</p>
      */
     BucketARN?: string;
     /**
+     * @public
      * <p>The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered Amazon S3
      *          files. You can also specify a custom prefix, as described in <a href="https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html">Custom Prefixes for Amazon S3
      *          Objects</a>.</p>
      */
     Prefix?: string;
     /**
+     * @public
      * <p>A prefix that Kinesis Data Firehose evaluates and adds to failed records before writing
      *          them to S3. This prefix appears immediately following the bucket name. For information
      *          about how to specify this prefix, see <a href="https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html">Custom Prefixes for Amazon S3
@@ -2969,42 +3325,51 @@ export interface ExtendedS3DestinationUpdate {
      */
     ErrorOutputPrefix?: string;
     /**
+     * @public
      * <p>The buffering option.</p>
      */
     BufferingHints?: BufferingHints;
     /**
+     * @public
      * <p>The compression format. If no value is specified, the default is
      *             <code>UNCOMPRESSED</code>. </p>
      */
     CompressionFormat?: CompressionFormat | string;
     /**
+     * @public
      * <p>The encryption configuration. If no value is specified, the default is no
      *          encryption.</p>
      */
     EncryptionConfiguration?: EncryptionConfiguration;
     /**
+     * @public
      * <p>The Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
     /**
+     * @public
      * <p>The data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>You can update a delivery stream to enable Amazon S3 backup if it is disabled. If
      *          backup is enabled, you can't update the delivery stream to disable it. </p>
      */
     S3BackupMode?: S3BackupMode | string;
     /**
+     * @public
      * <p>The Amazon S3 destination for backup.</p>
      */
     S3BackupUpdate?: S3DestinationUpdate;
     /**
+     * @public
      * <p>The serializer, deserializer, and schema for converting data from the JSON format to
      *          the Parquet or ORC format before writing it to Amazon S3.</p>
      */
     DataFormatConversionConfiguration?: DataFormatConversionConfiguration;
     /**
+     * @public
      * <p>The configuration of the dynamic partitioning mechanism that creates smaller data sets
      *          from the streaming data by partitioning it based on partition keys. Currently, dynamic
      *          partitioning is only supported for Amazon S3 destinations.
@@ -3017,10 +3382,12 @@ export interface ExtendedS3DestinationUpdate {
  */
 export interface ListDeliveryStreamsInput {
     /**
+     * @public
      * <p>The maximum number of delivery streams to list. The default value is 10.</p>
      */
     Limit?: number;
     /**
+     * @public
      * <p>The delivery stream type. This can be one of the following values:</p>
      *          <ul>
      *             <li>
@@ -3039,6 +3406,7 @@ export interface ListDeliveryStreamsInput {
      */
     DeliveryStreamType?: DeliveryStreamType | string;
     /**
+     * @public
      * <p>The list of delivery streams returned by this call to
      *             <code>ListDeliveryStreams</code> will start with the delivery stream whose name comes
      *          alphabetically immediately after the name you specify in
@@ -3051,10 +3419,12 @@ export interface ListDeliveryStreamsInput {
  */
 export interface ListDeliveryStreamsOutput {
     /**
+     * @public
      * <p>The names of the delivery streams.</p>
      */
     DeliveryStreamNames: string[] | undefined;
     /**
+     * @public
      * <p>Indicates whether there are more delivery streams available to list.</p>
      */
     HasMoreDeliveryStreams: boolean | undefined;
@@ -3064,16 +3434,19 @@ export interface ListDeliveryStreamsOutput {
  */
 export interface ListTagsForDeliveryStreamInput {
     /**
+     * @public
      * <p>The name of the delivery stream whose tags you want to list.</p>
      */
     DeliveryStreamName: string | undefined;
     /**
+     * @public
      * <p>The key to use as the starting point for the list of tags. If you set this parameter,
      *             <code>ListTagsForDeliveryStream</code> gets all tags that occur after
      *             <code>ExclusiveStartTagKey</code>.</p>
      */
     ExclusiveStartTagKey?: string;
     /**
+     * @public
      * <p>The number of tags to return. If this number is less than the total number of tags
      *          associated with the delivery stream, <code>HasMoreTags</code> is set to <code>true</code>
      *          in the response. To list additional tags, set <code>ExclusiveStartTagKey</code> to the last
@@ -3086,12 +3459,14 @@ export interface ListTagsForDeliveryStreamInput {
  */
 export interface ListTagsForDeliveryStreamOutput {
     /**
+     * @public
      * <p>A list of tags associated with <code>DeliveryStreamName</code>, starting with the
      *          first tag after <code>ExclusiveStartTagKey</code> and up to the specified
      *             <code>Limit</code>.</p>
      */
     Tags: Tag[] | undefined;
     /**
+     * @public
      * <p>If this is <code>true</code> in the response, more tags are available. To list the
      *          remaining tags, set <code>ExclusiveStartTagKey</code> to the key of the last tag returned
      *          and call <code>ListTagsForDeliveryStream</code> again.</p>
@@ -3104,6 +3479,7 @@ export interface ListTagsForDeliveryStreamOutput {
  */
 export interface _Record {
     /**
+     * @public
      * <p>The data blob, which is base64-encoded when the blob is serialized. The maximum size
      *          of the data blob, before base64-encoding, is 1,000 KiB.</p>
      */
@@ -3114,10 +3490,12 @@ export interface _Record {
  */
 export interface PutRecordInput {
     /**
+     * @public
      * <p>The name of the delivery stream.</p>
      */
     DeliveryStreamName: string | undefined;
     /**
+     * @public
      * <p>The record.</p>
      */
     Record: _Record | undefined;
@@ -3127,10 +3505,12 @@ export interface PutRecordInput {
  */
 export interface PutRecordOutput {
     /**
+     * @public
      * <p>The ID of the record.</p>
      */
     RecordId: string | undefined;
     /**
+     * @public
      * <p>Indicates whether server-side encryption (SSE) was enabled during this operation.</p>
      */
     Encrypted?: boolean;
@@ -3155,10 +3535,12 @@ export declare class ServiceUnavailableException extends __BaseException {
  */
 export interface PutRecordBatchInput {
     /**
+     * @public
      * <p>The name of the delivery stream.</p>
      */
     DeliveryStreamName: string | undefined;
     /**
+     * @public
      * <p>One or more records.</p>
      */
     Records: _Record[] | undefined;
@@ -3172,14 +3554,17 @@ export interface PutRecordBatchInput {
  */
 export interface PutRecordBatchResponseEntry {
     /**
+     * @public
      * <p>The ID of the record.</p>
      */
     RecordId?: string;
     /**
+     * @public
      * <p>The error code for an individual record result.</p>
      */
     ErrorCode?: string;
     /**
+     * @public
      * <p>The error message for an individual record result.</p>
      */
     ErrorMessage?: string;
@@ -3189,6 +3574,7 @@ export interface PutRecordBatchResponseEntry {
  */
 export interface PutRecordBatchOutput {
     /**
+     * @public
      * <p>The number of records that might have failed processing. This number might be greater
      *          than 0 even if the <a>PutRecordBatch</a> call succeeds. Check
      *             <code>FailedPutCount</code> to determine whether there are records that you need to
@@ -3196,10 +3582,12 @@ export interface PutRecordBatchOutput {
      */
     FailedPutCount: number | undefined;
     /**
+     * @public
      * <p>Indicates whether server-side encryption (SSE) was enabled during this operation.</p>
      */
     Encrypted?: boolean;
     /**
+     * @public
      * <p>The results array. For each record, the index of the response element is the same as
      *          the index used in the request array.</p>
      */
@@ -3210,11 +3598,13 @@ export interface PutRecordBatchOutput {
  */
 export interface StartDeliveryStreamEncryptionInput {
     /**
+     * @public
      * <p>The name of the delivery stream for which you want to enable server-side encryption
      *          (SSE).</p>
      */
     DeliveryStreamName: string | undefined;
     /**
+     * @public
      * <p>Used to specify the type and Amazon Resource Name (ARN) of the KMS key needed for
      *          Server-Side Encryption (SSE).</p>
      */
@@ -3230,6 +3620,7 @@ export interface StartDeliveryStreamEncryptionOutput {
  */
 export interface StopDeliveryStreamEncryptionInput {
     /**
+     * @public
      * <p>The name of the delivery stream for which you want to disable server-side encryption
      *          (SSE).</p>
      */
@@ -3245,10 +3636,12 @@ export interface StopDeliveryStreamEncryptionOutput {
  */
 export interface TagDeliveryStreamInput {
     /**
+     * @public
      * <p>The name of the delivery stream to which you want to add the tags.</p>
      */
     DeliveryStreamName: string | undefined;
     /**
+     * @public
      * <p>A set of key-value pairs to use to create the tags.</p>
      */
     Tags: Tag[] | undefined;
@@ -3263,10 +3656,12 @@ export interface TagDeliveryStreamOutput {
  */
 export interface UntagDeliveryStreamInput {
     /**
+     * @public
      * <p>The name of the delivery stream.</p>
      */
     DeliveryStreamName: string | undefined;
     /**
+     * @public
      * <p>A list of tag keys. Each corresponding tag is removed from the delivery
      *          stream.</p>
      */
@@ -3283,10 +3678,12 @@ export interface UntagDeliveryStreamOutput {
  */
 export interface HttpEndpointDestinationUpdate {
     /**
+     * @public
      * <p>Describes the configuration of the HTTP endpoint destination.</p>
      */
     EndpointConfiguration?: HttpEndpointConfiguration;
     /**
+     * @public
      * <p>Describes buffering options that can be applied to the data before it is delivered to
      *          the HTTPS endpoint destination. Kinesis Data Firehose teats these options as hints, and it
      *          might choose to use more optimal values. The <code>SizeInMBs</code> and
@@ -3295,30 +3692,36 @@ export interface HttpEndpointDestinationUpdate {
      */
     BufferingHints?: HttpEndpointBufferingHints;
     /**
+     * @public
      * <p>Describes the Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
     /**
+     * @public
      * <p>The configuration of the request sent to the HTTP endpoint specified as the
      *          destination.</p>
      */
     RequestConfiguration?: HttpEndpointRequestConfiguration;
     /**
+     * @public
      * <p>Describes a data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>Kinesis Data Firehose uses this IAM role for all the permissions that the delivery
      *          stream needs.</p>
      */
     RoleARN?: string;
     /**
+     * @public
      * <p>Describes the retry behavior in case Kinesis Data Firehose is unable to deliver data to
      *          the specified HTTP endpoint destination, or if it doesn't receive a valid acknowledgment of
      *          receipt from the specified HTTP endpoint destination.</p>
      */
     RetryOptions?: HttpEndpointRetryOptions;
     /**
+     * @public
      * <p>Describes the S3 bucket backup options for the data that Kinesis Firehose delivers to
      *          the HTTP endpoint destination. You can back up all documents (<code>AllData</code>) or only
      *          the documents that Kinesis Data Firehose could not deliver to the specified HTTP endpoint
@@ -3326,6 +3729,7 @@ export interface HttpEndpointDestinationUpdate {
      */
     S3BackupMode?: HttpEndpointS3BackupMode | string;
     /**
+     * @public
      * <p>Describes an update for a destination in Amazon S3.</p>
      */
     S3Update?: S3DestinationUpdate;
@@ -3336,33 +3740,40 @@ export interface HttpEndpointDestinationUpdate {
  */
 export interface RedshiftDestinationUpdate {
     /**
+     * @public
      * <p>The Amazon Resource Name (ARN) of the Amazon Web Services credentials. For more
      *          information, see <a href="https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html">Amazon Resource Names (ARNs) and
      *                Amazon Web Services Service Namespaces</a>.</p>
      */
     RoleARN?: string;
     /**
+     * @public
      * <p>The database connection string.</p>
      */
     ClusterJDBCURL?: string;
     /**
+     * @public
      * <p>The <code>COPY</code> command.</p>
      */
     CopyCommand?: CopyCommand;
     /**
+     * @public
      * <p>The name of the user.</p>
      */
     Username?: string;
     /**
+     * @public
      * <p>The user password.</p>
      */
     Password?: string;
     /**
+     * @public
      * <p>The retry behavior in case Kinesis Data Firehose is unable to deliver documents to
      *          Amazon Redshift. Default value is 3600 (60 minutes).</p>
      */
     RetryOptions?: RedshiftRetryOptions;
     /**
+     * @public
      * <p>The Amazon S3 destination.</p>
      *          <p>The compression formats <code>SNAPPY</code> or <code>ZIP</code> cannot be specified
      *          in <code>RedshiftDestinationUpdate.S3Update</code> because the Amazon Redshift
@@ -3371,19 +3782,23 @@ export interface RedshiftDestinationUpdate {
      */
     S3Update?: S3DestinationUpdate;
     /**
+     * @public
      * <p>The data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>You can update a delivery stream to enable Amazon S3 backup if it is disabled. If
      *          backup is enabled, you can't update the delivery stream to disable it. </p>
      */
     S3BackupMode?: RedshiftS3BackupMode | string;
     /**
+     * @public
      * <p>The Amazon S3 destination for backup.</p>
      */
     S3BackupUpdate?: S3DestinationUpdate;
     /**
+     * @public
      * <p>The Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
@@ -3394,20 +3809,24 @@ export interface RedshiftDestinationUpdate {
  */
 export interface SplunkDestinationUpdate {
     /**
+     * @public
      * <p>The HTTP Event Collector (HEC) endpoint to which Kinesis Data Firehose sends your
      *          data.</p>
      */
     HECEndpoint?: string;
     /**
+     * @public
      * <p>This type can be either "Raw" or "Event."</p>
      */
     HECEndpointType?: HECEndpointType | string;
     /**
+     * @public
      * <p>A GUID that you obtain from your Splunk cluster when you create a new HEC
      *          endpoint.</p>
      */
     HECToken?: string;
     /**
+     * @public
      * <p>The amount of time that Kinesis Data Firehose waits to receive an acknowledgment from
      *          Splunk after it sends data. At the end of the timeout period, Kinesis Data Firehose either
      *          tries to send the data again or considers it an error, based on your retry
@@ -3415,11 +3834,13 @@ export interface SplunkDestinationUpdate {
      */
     HECAcknowledgmentTimeoutInSeconds?: number;
     /**
+     * @public
      * <p>The retry behavior in case Kinesis Data Firehose is unable to deliver data to Splunk
      *          or if it doesn't receive an acknowledgment of receipt from Splunk.</p>
      */
     RetryOptions?: SplunkRetryOptions;
     /**
+     * @public
      * <p>Specifies how you want Kinesis Data Firehose to back up documents to Amazon S3. When
      *          set to <code>FailedDocumentsOnly</code>, Kinesis Data Firehose writes any data that could
      *          not be indexed to the configured Amazon S3 destination. When set to <code>AllEvents</code>,
@@ -3431,14 +3852,17 @@ export interface SplunkDestinationUpdate {
      */
     S3BackupMode?: SplunkS3BackupMode | string;
     /**
+     * @public
      * <p>Your update to the configuration of the backup Amazon S3 location.</p>
      */
     S3Update?: S3DestinationUpdate;
     /**
+     * @public
      * <p>The data processing configuration.</p>
      */
     ProcessingConfiguration?: ProcessingConfiguration;
     /**
+     * @public
      * <p>The Amazon CloudWatch logging options for your delivery stream.</p>
      */
     CloudWatchLoggingOptions?: CloudWatchLoggingOptions;
@@ -3448,10 +3872,12 @@ export interface SplunkDestinationUpdate {
  */
 export interface UpdateDestinationInput {
     /**
+     * @public
      * <p>The name of the delivery stream.</p>
      */
     DeliveryStreamName: string | undefined;
     /**
+     * @public
      * <p>Obtain this value from the <code>VersionId</code> result of <a>DeliveryStreamDescription</a>. This value is required, and helps the service
      *          perform conditional operations. For example, if there is an interleaving update and this
      *          value is null, then the update destination fails. After the update is successful, the
@@ -3460,40 +3886,49 @@ export interface UpdateDestinationInput {
      */
     CurrentDeliveryStreamVersionId: string | undefined;
     /**
+     * @public
      * <p>The ID of the destination.</p>
      */
     DestinationId: string | undefined;
     /**
+     * @public
      * @deprecated
      *
      * <p>[Deprecated] Describes an update for a destination in Amazon S3.</p>
      */
     S3DestinationUpdate?: S3DestinationUpdate;
     /**
+     * @public
      * <p>Describes an update for a destination in Amazon S3.</p>
      */
     ExtendedS3DestinationUpdate?: ExtendedS3DestinationUpdate;
     /**
+     * @public
      * <p>Describes an update for a destination in Amazon Redshift.</p>
      */
     RedshiftDestinationUpdate?: RedshiftDestinationUpdate;
     /**
+     * @public
      * <p>Describes an update for a destination in Amazon ES.</p>
      */
     ElasticsearchDestinationUpdate?: ElasticsearchDestinationUpdate;
     /**
+     * @public
      * <p>Describes an update for a destination in Amazon OpenSearch Service.</p>
      */
     AmazonopensearchserviceDestinationUpdate?: AmazonopensearchserviceDestinationUpdate;
     /**
+     * @public
      * <p>Describes an update for a destination in Splunk.</p>
      */
     SplunkDestinationUpdate?: SplunkDestinationUpdate;
     /**
+     * @public
      * <p>Describes an update to the specified HTTP endpoint destination.</p>
      */
     HttpEndpointDestinationUpdate?: HttpEndpointDestinationUpdate;
     /**
+     * @public
      * <p>Describes an update for a destination in the Serverless offering for Amazon OpenSearch
      *          Service.</p>
      */