@aws-sdk/client-elastic-load-balancing-v2 3.212.0 → 3.213.0

package/dist-types/ElasticLoadBalancingV2.d.ts

@@ -437,8 +437,6 @@ export declare class ElasticLoadBalancingV2 extends ElasticLoadBalancingV2Client
     /**
      * <p>Modifies the health checks used when evaluating the health state of the targets in the
      *       specified target group.</p>
-     *          <p>If the protocol of the target group is TCP, TLS, UDP, or TCP_UDP, you can't modify the
-     *       health check protocol, interval, timeout, or success codes.</p>
      */
     modifyTargetGroup(args: ModifyTargetGroupCommandInput, options?: __HttpHandlerOptions): Promise<ModifyTargetGroupCommandOutput>;
     modifyTargetGroup(args: ModifyTargetGroupCommandInput, cb: (err: any, data?: ModifyTargetGroupCommandOutput) => void): void;

package/dist-types/commands/ModifyTargetGroupCommand.d.ts

@@ -10,8 +10,6 @@ export interface ModifyTargetGroupCommandOutput extends ModifyTargetGroupOutput,
 /**
  * <p>Modifies the health checks used when evaluating the health state of the targets in the
  *       specified target group.</p>
- *          <p>If the protocol of the target group is TCP, TLS, UDP, or TCP_UDP, you can't modify the
- *       health check protocol, interval, timeout, or success codes.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/models/models_0.d.ts

@@ -197,7 +197,7 @@ export interface TargetGroupStickinessConfig {
  */
 export interface ForwardActionConfig {
     /**
-     * <p>One or more target groups. For Network Load Balancers, you can specify a single target
+     * <p>The target groups. For Network Load Balancers, you can specify a single target
      *       group.</p>
      */
     TargetGroups?: TargetGroupTuple[];
@@ -1160,7 +1160,7 @@ export declare class TooManyLoadBalancersException extends __BaseException {
  */
 export interface HostHeaderConditionConfig {
     /**
-     * <p>One or more host names. The maximum size of each name is 128 characters. The comparison is
+     * <p>The host names. The maximum size of each name is 128 characters. The comparison is
      *       case insensitive. The following wildcard characters are supported: * (matches 0 or more
      *       characters) and ? (matches exactly 1 character).</p>
      *          <p>If you specify multiple strings, the condition is satisfied if one of the strings matches
@@ -1182,7 +1182,7 @@ export interface HttpHeaderConditionConfig {
      */
     HttpHeaderName?: string;
     /**
-     * <p>One or more strings to compare against the value of the HTTP header. The maximum size of
+     * <p>The strings to compare against the value of the HTTP header. The maximum size of
      *       each string is 128 characters. The comparison strings are case insensitive. The following
      *       wildcard characters are supported: * (matches 0 or more characters) and ? (matches exactly 1
      *       character).</p>
@@ -1216,7 +1216,7 @@ export interface HttpRequestMethodConditionConfig {
  */
 export interface PathPatternConditionConfig {
     /**
-     * <p>One or more path patterns to compare against the request URL. The maximum size of each
+     * <p>The path patterns to compare against the request URL. The maximum size of each
      *       string is 128 characters. The comparison is case sensitive. The following wildcard characters
      *       are supported: * (matches 0 or more characters) and ? (matches exactly 1 character).</p>
      *          <p>If you specify multiple strings, the condition is satisfied if one of them matches the
@@ -1247,7 +1247,7 @@ export interface QueryStringKeyValuePair {
  */
 export interface QueryStringConditionConfig {
     /**
-     * <p>One or more key/value pairs or values to find in the query string. The maximum size of
+     * <p>The key/value pairs or values to find in the query string. The maximum size of
      *       each string is 128 characters. The comparison is case insensitive. The following wildcard
      *       characters are supported: * (matches 0 or more characters) and ? (matches exactly 1
      *       character). To search for a literal '*' or '?' character in a query string, you must escape
@@ -1265,7 +1265,7 @@ export interface QueryStringConditionConfig {
  */
 export interface SourceIpConditionConfig {
     /**
-     * <p>One or more source IP addresses, in CIDR format. You can use both IPv4 and IPv6 addresses.
+     * <p>The source IP addresses, in CIDR format. You can use both IPv4 and IPv6 addresses.
      *       Wildcards are not supported.</p>
      *          <p>If you specify multiple addresses, the condition is satisfied if the source IP address of
      *       the request matches one of the CIDR blocks. This condition is not satisfied by the addresses
@@ -1500,10 +1500,11 @@ export declare enum TargetGroupIpAddressTypeEnum {
  */
 export interface Matcher {
     /**
-     * <p>For Application Load Balancers, you can specify values between 200 and 499, and the
-     *       default value is 200. You can specify multiple values (for example, "200,202") or a range of
-     *       values (for example, "200-299").</p>
-     *          <p>For Network Load Balancers and Gateway Load Balancers, this must be "200–399".</p>
+     * <p>For Application Load Balancers, you can specify values between 200 and 499, with the
+     *       default value being 200. You can specify multiple values (for example, "200,202") or a range of values (for example, "200-299").</p>
+     *          <p>For Network Load Balancers, you can specify values between 200 and 599, with the
+     *       default value being 200-399. You can specify multiple values (for example, "200,202") or a range of values (for example, "200-299").</p>
+     *          <p>For Gateway Load Balancers, this must be "200–399".</p>
      *          <p>Note that when using shorthand syntax, some values such as commas need to be
      *       escaped.</p>
      */
@@ -1583,40 +1584,39 @@ export interface CreateTargetGroupInput {
      */
     HealthCheckPath?: string;
     /**
-     * <p>The approximate amount of time, in seconds, between health checks of an individual target.
-     *       If the target group protocol is HTTP or HTTPS, the default is 30 seconds.
-     *       If the target group protocol is TCP, TLS, UDP, or TCP_UDP, the supported values are 10 and 30
-     *       seconds and the default is 30 seconds.
+     * <p>The approximate amount of time, in seconds, between health checks of an individual target. The range is 5-300.
+     *       If the target group protocol is TCP, TLS, UDP, TCP_UDP, HTTP or HTTPS, the default is 30 seconds.
      *       If the target group protocol is GENEVE, the default is 10 seconds.
      *       If the target type is <code>lambda</code>, the default is 35 seconds.</p>
      */
     HealthCheckIntervalSeconds?: number;
     /**
      * <p>The amount of time, in seconds, during which no response from a target means a failed
-     *       health check. For target groups with a protocol of HTTP, HTTPS, or GENEVE, the default is 5
-     *       seconds. For target groups with a protocol of TCP or TLS, this value must be 6 seconds for
-     *       HTTP health checks and 10 seconds for TCP and HTTPS health checks. If the target type is
-     *         <code>lambda</code>, the default is 30 seconds.</p>
+     *       health check. The range is 2–120 seconds. For target groups with a protocol of HTTP, the
+     *       default is 6 seconds. For target groups with a protocol of TCP, TLS or HTTPS, the default
+     *       is 10 seconds. For target groups with a protocol of GENEVE, the default is 5 seconds. If
+     *       the target type is <code>lambda</code>, the default is 30 seconds.</p>
      */
     HealthCheckTimeoutSeconds?: number;
     /**
-     * <p>The number of consecutive health checks successes required before considering an unhealthy
-     *       target healthy. For target groups with a protocol of HTTP or HTTPS, the default is 5. For
-     *       target groups with a protocol of TCP, TLS, or GENEVE, the default is 3. If the target type is
-     *         <code>lambda</code>, the default is 5.</p>
+     * <p>The number of consecutive health check successes required before considering a target healthy. The range is
+     *       2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default is 5. For target groups
+     *       with a protocol of GENEVE, the default is 3. If the target type
+     *       is <code>lambda</code>, the default is 5.</p>
      */
     HealthyThresholdCount?: number;
     /**
-     * <p>The number of consecutive health check failures required before considering a target
-     *       unhealthy. If the target group protocol is HTTP or HTTPS, the default is 2. If the target
-     *       group protocol is TCP or TLS, this value must be the same as the healthy threshold count. If
-     *       the target group protocol is GENEVE, the default is 3. If the target type is
-     *         <code>lambda</code>, the default is 2.</p>
+     * <p>The number of consecutive health check failures required before considering a target unhealthy. The range is
+     *       2-10. If the target group protocol is TCP, TCP_UDP, UDP, TLS, HTTP or HTTPS, the default is 2. For target groups
+     *       with a protocol of GENEVE, the default is 3. If the target type
+     *       is <code>lambda</code>, the default is 5.</p>
      */
     UnhealthyThresholdCount?: number;
     /**
      * <p>[HTTP/HTTPS health checks] The HTTP or gRPC codes to use when checking for a successful
-     *       response from a target.</p>
+     *       response from a target. For target groups with a protocol of TCP, TCP_UDP, UDP or TLS the range
+     *       is 200-599. For target groups with a protocol of HTTP or HTTPS, the range is 200-499. For target
+     *       groups with a protocol of GENEVE, the range is 200-399.</p>
      */
     Matcher?: Matcher;
     /**
@@ -1821,14 +1821,22 @@ export interface TargetDescription {
      * <p>An Availability Zone or <code>all</code>. This determines whether the target receives
      *       traffic from the load balancer nodes in the specified Availability Zone or from all enabled
      *       Availability Zones for the load balancer.</p>
+     *
+     *          <p>For Application Load Balancer target groups, the specified Availability Zone value is only applicable
+     *       when cross-zone load balancing is off. Otherwise the parameter is ignored and treated
+     *       as <code>all</code>.</p>
+     *
      *          <p>This parameter is not supported if the target type of the target group is
-     *         <code>instance</code> or <code>alb</code>.</p>
-     *          <p>If the target type is <code>ip</code> and the IP address is in a subnet of the VPC for the
-     *       target group, the Availability Zone is automatically detected and this parameter is optional.
-     *       If the IP address is outside the VPC, this parameter is required.</p>
-     *          <p>With an Application Load Balancer, if the target type is <code>ip</code> and the IP
-     *       address is outside the VPC for the target group, the only supported value is
-     *       <code>all</code>.</p>
+     *       <code>instance</code> or <code>alb</code>.</p>
+     *
+     *          <p>If the target type is <code>ip</code> and the IP address is in a subnet of the VPC for the target group,
+     *       the Availability Zone is automatically detected and this parameter is optional. If the IP address is outside
+     *       the VPC, this parameter is required.</p>
+     *
+     *          <p>For Application Load Balancer target groups with cross-zone load balancing off, if the target type
+     *       is <code>ip</code> and the IP address is outside of the VPC for the target group, this should be an
+     *       Availability Zone inside the VPC for the target group.</p>
+     *
      *          <p>If the target type is <code>lambda</code>, this parameter is optional and the only
      *       supported value is <code>all</code>.</p>
      */
@@ -2021,7 +2029,7 @@ export interface LoadBalancerAttribute {
     /**
      * <p>The name of the attribute.</p>
      *
-     *          <p>The following attribute is supported by all load balancers:</p>
+     *          <p>The following attributes are supported by all load balancers:</p>
      *          <ul>
      *             <li>
      *                <p>
@@ -2029,6 +2037,13 @@ export interface LoadBalancerAttribute {
      *           enabled. The value is <code>true</code> or <code>false</code>. The default is
      *             <code>false</code>.</p>
      *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>load_balancing.cross_zone.enabled</code> - Indicates whether cross-zone load
+     *           balancing is enabled. The possible values are <code>true</code> and <code>false</code>.
+     *           The default for Network Load Balancers and Gateway Load Balancers is <code>false</code>.
+     *           The default for Application Load Balancers is <code>true</code>, and cannot be changed.</p>
+     *             </li>
      *          </ul>
      *
      *          <p>The following attributes are supported by both Application Load Balancers and Network Load
@@ -2146,17 +2161,6 @@ export interface LoadBalancerAttribute {
      *           default is <code>false</code>.</p>
      *             </li>
      *          </ul>
-     *
-     *          <p>The following attribute is supported by Network Load Balancers and Gateway Load
-     *       Balancers:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>load_balancing.cross_zone.enabled</code> - Indicates whether cross-zone load
-     *           balancing is enabled. The possible values are <code>true</code> and <code>false</code>.
-     *           The default is <code>false</code>.</p>
-     *             </li>
-     *          </ul>
      */
     Key?: string;
     /**
@@ -2322,7 +2326,7 @@ export interface TargetGroupAttribute {
     /**
      * <p>The name of the attribute.</p>
      *
-     *          <p>The following attribute is supported by all load balancers:</p>
+     *          <p>The following attributes are supported by all load balancers:</p>
      *          <ul>
      *             <li>
      *                <p>
@@ -2332,11 +2336,6 @@ export interface TargetGroupAttribute {
      *           default value is 300 seconds. If the target is a Lambda function, this attribute is not
      *           supported.</p>
      *             </li>
-     *          </ul>
-     *
-     *          <p>The following attributes are supported by Application Load Balancers, Network Load
-     *       Balancers, and Gateway Load Balancers:</p>
-     *          <ul>
      *             <li>
      *                <p>
      *                   <code>stickiness.enabled</code> - Indicates whether target stickiness is enabled. The
@@ -2345,8 +2344,7 @@ export interface TargetGroupAttribute {
      *             </li>
      *             <li>
      *                <p>
-     *                   <code>stickiness.type</code> - Indicates the type of stickiness. The possible values
-     *           are: </p>
+     *                   <code>stickiness.type</code> - Indicates the type of stickiness. The possible values are:</p>
      *                <ul>
      *                   <li>
      *                      <p>
@@ -2358,13 +2356,56 @@ export interface TargetGroupAttribute {
      *                   </li>
      *                   <li>
      *                      <p>
-     *                         <code>source_ip_dest_ip</code> and <code>source_ip_dest_ip_proto</code> for Gateway Load
-     *               Balancers.</p>
+     *                         <code>source_ip_dest_ip</code> and <code>source_ip_dest_ip_proto</code> for Gateway Load Balancers.</p>
      *                   </li>
      *                </ul>
      *             </li>
      *          </ul>
      *
+     *          <p>The following attributes are supported by Application Load Balancers and
+     *       Network Load Balancers:</p>
+     *          <ul>
+     *             <li>
+     *                <p>
+     *                   <code>load_balancing.cross_zone.enabled</code> - Indicates whether cross zone load
+     *           balancing is enabled. The value is <code>true</code>, <code>false</code> or
+     *           <code>use_load_balancer_configuration</code>. The default is
+     *           <code>use_load_balancer_configuration</code>.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>target_group_health.dns_failover.minimum_healthy_targets.count</code> -
+     *           The minimum number of targets that must be healthy.
+     *           If the number of healthy targets is below this value, mark the zone as unhealthy
+     *           in DNS, so that traffic is routed only to healthy zones. The possible values are
+     *           <code>off</code> or an integer from 1 to the maximum number of targets.
+     *           The default is <code>off</code>.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>target_group_health.dns_failover.minimum_healthy_targets.percentage</code> -
+     *           The minimum percentage of targets that must be healthy.
+     *           If the percentage of healthy targets is below this value, mark the zone as unhealthy
+     *           in DNS, so that traffic is routed only to healthy zones. The possible values are
+     *           <code>off</code> or an integer from 1 to 100. The default is <code>off</code>.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>target_group_health.unhealthy_state_routing.minimum_healthy_targets.count</code> -
+     *           The minimum number of targets that must be healthy.
+     *           If the number of healthy targets is below this value, send traffic to all targets, including unhealthy targets.
+     *           The possible values are 1 to the maximum number of targets. The default is 1.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>target_group_health.unhealthy_state_routing.minimum_healthy_targets.percentage</code> -
+     *           The minimum percentage of targets that must be healthy.
+     *           If the percentage of healthy targets is below this value, send traffic to all targets, including unhealthy targets.
+     *           The possible values are <code>off</code> or an integer from 1 to 100.
+     *           The default is <code>off</code>.</p>
+     *             </li>
+     *          </ul>
+     *
      *          <p>The following attributes are supported only if the load balancer is an Application Load
      *       Balancer and the target is an instance or an IP address:</p>
      *          <ul>
@@ -2443,6 +2484,7 @@ export interface TargetGroupAttribute {
      *             <code>false</code>. </p>
      *             </li>
      *          </ul>
+     *
      *          <p>The following attributes are supported only by Gateway Load Balancers:</p>
      *          <ul>
      *             <li>
@@ -2833,8 +2875,7 @@ export interface ModifyTargetGroupInput {
      */
     HealthCheckEnabled?: boolean;
     /**
-     * <p>The approximate amount of time, in seconds, between health checks of an individual target.
-     *       For TCP health checks, the supported values are 10 or 30 seconds.</p>
+     * <p>The approximate amount of time, in seconds, between health checks of an individual target.</p>
      */
     HealthCheckIntervalSeconds?: number;
     /**
@@ -2849,13 +2890,14 @@ export interface ModifyTargetGroupInput {
     HealthyThresholdCount?: number;
     /**
      * <p>The number of consecutive health check failures required before considering the target
-     *       unhealthy. For target groups with a protocol of TCP or TLS, this value must be the same as the
-     *       healthy threshold count.</p>
+     *       unhealthy.</p>
      */
     UnhealthyThresholdCount?: number;
     /**
      * <p>[HTTP/HTTPS health checks] The HTTP or gRPC codes to use when checking for a successful
-     *       response from a target.</p>
+     *       response from a target. For target groups with a protocol of TCP, TCP_UDP, UDP or TLS the range
+     *       is 200-599. For target groups with a protocol of HTTP or HTTPS, the range is 200-499. For target
+     *       groups with a protocol of GENEVE, the range is 200-399.</p>
      */
     Matcher?: Matcher;
 }

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@aws-sdk/client-elastic-load-balancing-v2",
   "description": "AWS SDK for JavaScript Elastic Load Balancing V2 Client for Node.js, Browser and React Native",
-  "version": "3.212.0",
+  "version": "3.213.0",
   "scripts": {
     "build": "concurrently 'yarn:build:cjs' 'yarn:build:es' 'yarn:build:types'",
     "build:cjs": "tsc -p tsconfig.cjs.json",
@@ -19,7 +19,7 @@
   "dependencies": {
     "@aws-crypto/sha256-browser": "2.0.0",
     "@aws-crypto/sha256-js": "2.0.0",
-    "@aws-sdk/client-sts": "3.212.0",
+    "@aws-sdk/client-sts": "3.213.0",
     "@aws-sdk/config-resolver": "3.212.0",
     "@aws-sdk/credential-provider-node": "3.212.0",
     "@aws-sdk/fetch-http-handler": "3.212.0",