@aws-sdk/client-ecs 3.699.0 → 3.708.0

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (66) hide show
  1. package/README.md +12 -11
  2. package/dist-types/ECS.d.ts +12 -11
  3. package/dist-types/ECSClient.d.ts +12 -11
  4. package/dist-types/commands/CreateCapacityProviderCommand.d.ts +22 -17
  5. package/dist-types/commands/CreateClusterCommand.d.ts +19 -17
  6. package/dist-types/commands/CreateServiceCommand.d.ts +80 -75
  7. package/dist-types/commands/CreateTaskSetCommand.d.ts +19 -15
  8. package/dist-types/commands/DeleteAccountSettingCommand.d.ts +12 -9
  9. package/dist-types/commands/DeleteAttributesCommand.d.ts +4 -2
  10. package/dist-types/commands/DeleteCapacityProviderCommand.d.ts +21 -17
  11. package/dist-types/commands/DeleteClusterCommand.d.ts +28 -23
  12. package/dist-types/commands/DeleteServiceCommand.d.ts +29 -23
  13. package/dist-types/commands/DeleteTaskDefinitionsCommand.d.ts +28 -23
  14. package/dist-types/commands/DeleteTaskSetCommand.d.ts +17 -14
  15. package/dist-types/commands/DeregisterContainerInstanceCommand.d.ts +22 -19
  16. package/dist-types/commands/DeregisterTaskDefinitionCommand.d.ts +26 -23
  17. package/dist-types/commands/DescribeCapacityProvidersCommand.d.ts +10 -8
  18. package/dist-types/commands/DescribeClustersCommand.d.ts +11 -8
  19. package/dist-types/commands/DescribeContainerInstancesCommand.d.ts +12 -10
  20. package/dist-types/commands/DescribeServiceDeploymentsCommand.d.ts +15 -10
  21. package/dist-types/commands/DescribeServiceRevisionsCommand.d.ts +14 -11
  22. package/dist-types/commands/DescribeServicesCommand.d.ts +10 -8
  23. package/dist-types/commands/DescribeTaskDefinitionCommand.d.ts +16 -13
  24. package/dist-types/commands/DescribeTaskSetsCommand.d.ts +17 -13
  25. package/dist-types/commands/DescribeTasksCommand.d.ts +13 -11
  26. package/dist-types/commands/DiscoverPollEndpointCommand.d.ts +8 -7
  27. package/dist-types/commands/ExecuteCommandCommand.d.ts +23 -19
  28. package/dist-types/commands/GetTaskProtectionCommand.d.ts +10 -8
  29. package/dist-types/commands/ListAccountSettingsCommand.d.ts +10 -8
  30. package/dist-types/commands/ListAttributesCommand.d.ts +8 -6
  31. package/dist-types/commands/ListClustersCommand.d.ts +10 -8
  32. package/dist-types/commands/ListContainerInstancesCommand.d.ts +13 -12
  33. package/dist-types/commands/ListServiceDeploymentsCommand.d.ts +14 -10
  34. package/dist-types/commands/ListServicesByNamespaceCommand.d.ts +15 -12
  35. package/dist-types/commands/ListServicesCommand.d.ts +12 -10
  36. package/dist-types/commands/ListTagsForResourceCommand.d.ts +10 -8
  37. package/dist-types/commands/ListTaskDefinitionFamiliesCommand.d.ts +17 -13
  38. package/dist-types/commands/ListTaskDefinitionsCommand.d.ts +13 -11
  39. package/dist-types/commands/ListTasksCommand.d.ts +15 -12
  40. package/dist-types/commands/PutAccountSettingCommand.d.ts +14 -11
  41. package/dist-types/commands/PutAccountSettingDefaultCommand.d.ts +12 -10
  42. package/dist-types/commands/PutAttributesCommand.d.ts +10 -7
  43. package/dist-types/commands/PutClusterCapacityProvidersCommand.d.ts +29 -24
  44. package/dist-types/commands/RegisterContainerInstanceCommand.d.ts +12 -10
  45. package/dist-types/commands/RegisterTaskDefinitionCommand.d.ts +24 -21
  46. package/dist-types/commands/RunTaskCommand.d.ts +37 -33
  47. package/dist-types/commands/StartTaskCommand.d.ts +16 -16
  48. package/dist-types/commands/StopTaskCommand.d.ts +22 -18
  49. package/dist-types/commands/SubmitAttachmentStateChangesCommand.d.ts +10 -8
  50. package/dist-types/commands/SubmitContainerStateChangeCommand.d.ts +8 -7
  51. package/dist-types/commands/SubmitTaskStateChangeCommand.d.ts +10 -8
  52. package/dist-types/commands/TagResourceCommand.d.ts +14 -11
  53. package/dist-types/commands/UntagResourceCommand.d.ts +10 -8
  54. package/dist-types/commands/UpdateCapacityProviderCommand.d.ts +10 -8
  55. package/dist-types/commands/UpdateClusterCommand.d.ts +10 -8
  56. package/dist-types/commands/UpdateClusterSettingsCommand.d.ts +10 -8
  57. package/dist-types/commands/UpdateContainerAgentCommand.d.ts +37 -33
  58. package/dist-types/commands/UpdateContainerInstancesStateCommand.d.ts +48 -42
  59. package/dist-types/commands/UpdateServiceCommand.d.ts +101 -91
  60. package/dist-types/commands/UpdateServicePrimaryTaskSetCommand.d.ts +20 -15
  61. package/dist-types/commands/UpdateTaskProtectionCommand.d.ts +25 -20
  62. package/dist-types/commands/UpdateTaskSetCommand.d.ts +19 -15
  63. package/dist-types/index.d.ts +12 -11
  64. package/dist-types/models/models_0.d.ts +3401 -2878
  65. package/dist-types/models/models_1.d.ts +165 -146
  66. package/package.json +1 -1
package/dist-types/commands/PutClusterCapacityProvidersCommand.d.ts CHANGED
@@ -27,18 +27,20 @@ declare const PutClusterCapacityProvidersCommand_base: {
27
27
  getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
28
28
  };
29
29
  /**
30
- * <p>Modifies the available capacity providers and the default capacity provider strategy for a
31
- * cluster.</p>
32
- * <p>You must specify both the available capacity providers and a default capacity provider strategy for
33
- * the cluster. If the specified cluster has existing capacity providers associated with it, you must
34
- * specify all existing capacity providers in addition to any new ones you want to add. Any existing
35
- * capacity providers that are associated with a cluster that are omitted from a <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_PutClusterCapacityProviders.html">PutClusterCapacityProviders</a> API call will be disassociated with the cluster. You can only
36
- * disassociate an existing capacity provider from a cluster if it's not being used by any existing
37
- * tasks.</p>
38
- * <p>When creating a service or running a task on a cluster, if no capacity provider or launch type is
39
- * specified, then the cluster's default capacity provider strategy is used. We recommend that you define
40
- * a default capacity provider strategy for your cluster. However, you must specify an empty array
41
- * (<code>[]</code>) to bypass defining a default strategy.</p>
30
+ * <p>Modifies the available capacity providers and the default capacity provider strategy
31
+ * for a cluster.</p>
32
+ * <p>You must specify both the available capacity providers and a default capacity provider
33
+ * strategy for the cluster. If the specified cluster has existing capacity providers
34
+ * associated with it, you must specify all existing capacity providers in addition to any
35
+ * new ones you want to add. Any existing capacity providers that are associated with a
36
+ * cluster that are omitted from a <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_PutClusterCapacityProviders.html">PutClusterCapacityProviders</a> API call will be disassociated with the
37
+ * cluster. You can only disassociate an existing capacity provider from a cluster if it's
38
+ * not being used by any existing tasks.</p>
39
+ * <p>When creating a service or running a task on a cluster, if no capacity provider or
40
+ * launch type is specified, then the cluster's default capacity provider strategy is used.
41
+ * We recommend that you define a default capacity provider strategy for your cluster.
42
+ * However, you must specify an empty array (<code>[]</code>) to bypass defining a default
43
+ * strategy.</p>
42
44
  * @example
43
45
  * Use a bare-bones client and the command you need to make an API call.
44
46
  * ```javascript
@@ -143,16 +145,17 @@ declare const PutClusterCapacityProvidersCommand_base: {
143
145
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
144
146
  *
145
147
  * @throws {@link ClientException} (client fault)
146
- * <p>These errors are usually caused by a client action. This client action might be using an action or
147
- * resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
148
- * be specifying an identifier that isn't valid.</p>
148
+ * <p>These errors are usually caused by a client action. This client action might be using
149
+ * an action or resource on behalf of a user that doesn't have permissions to use the
150
+ * action or resource. Or, it might be specifying an identifier that isn't valid.</p>
149
151
  * <p>The following list includes additional causes for the error:</p>
150
152
  * <ul>
151
153
  * <li>
152
- * <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
153
- * a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
154
- * been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
155
- * quotas</a>.</p>
154
+ * <p>The <code>RunTask</code> could not be processed because you use managed
155
+ * scaling and there is a capacity error because the quota of tasks in the
156
+ * <code>PROVISIONING</code> per cluster has been reached. For information
157
+ * about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
158
+ * service quotas</a>.</p>
156
159
  * </li>
157
160
  * </ul>
158
161
  *
@@ -160,7 +163,8 @@ declare const PutClusterCapacityProvidersCommand_base: {
160
163
  * <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
161
164
  *
162
165
  * @throws {@link InvalidParameterException} (client fault)
163
- * <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
166
+ * <p>The specified parameter isn't valid. Review the available parameters for the API
167
+ * request.</p>
164
168
  *
165
169
  * @throws {@link ResourceInUseException} (client fault)
166
170
  * <p>The specified resource is in-use and can't be removed.</p>
@@ -169,10 +173,11 @@ declare const PutClusterCapacityProvidersCommand_base: {
169
173
  * <p>These errors are usually caused by a server issue.</p>
170
174
  *
171
175
  * @throws {@link UpdateInProgressException} (client fault)
172
- * <p>There's already a current Amazon ECS container agent update in progress on the container instance that's
173
- * specified. If the container agent becomes disconnected while it's in a transitional stage, such as
174
- * <code>PENDING</code> or <code>STAGING</code>, the update process can get stuck in that state.
175
- * However, when the agent reconnects, it resumes where it stopped previously.</p>
176
+ * <p>There's already a current Amazon ECS container agent update in progress on the container
177
+ * instance that's specified. If the container agent becomes disconnected while it's in a
178
+ * transitional stage, such as <code>PENDING</code> or <code>STAGING</code>, the update
179
+ * process can get stuck in that state. However, when the agent reconnects, it resumes
180
+ * where it stopped previously.</p>
176
181
  *
177
182
  * @throws {@link ECSServiceException}
178
183
  * <p>Base exception class for all service exceptions from ECS service.</p>
package/dist-types/commands/RegisterContainerInstanceCommand.d.ts CHANGED
@@ -30,8 +30,8 @@ declare const RegisterContainerInstanceCommand_base: {
30
30
  * <note>
31
31
  * <p>This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.</p>
32
32
  * </note>
33
- * <p>Registers an EC2 instance into the specified cluster. This instance becomes available to place
34
- * containers on.</p>
33
+ * <p>Registers an EC2 instance into the specified cluster. This instance becomes available
34
+ * to place containers on.</p>
35
35
  * @example
36
36
  * Use a bare-bones client and the command you need to make an API call.
37
37
  * ```javascript
@@ -175,21 +175,23 @@ declare const RegisterContainerInstanceCommand_base: {
175
175
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
176
176
  *
177
177
  * @throws {@link ClientException} (client fault)
178
- * <p>These errors are usually caused by a client action. This client action might be using an action or
179
- * resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
180
- * be specifying an identifier that isn't valid.</p>
178
+ * <p>These errors are usually caused by a client action. This client action might be using
179
+ * an action or resource on behalf of a user that doesn't have permissions to use the
180
+ * action or resource. Or, it might be specifying an identifier that isn't valid.</p>
181
181
  * <p>The following list includes additional causes for the error:</p>
182
182
  * <ul>
183
183
  * <li>
184
- * <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
185
- * a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
186
- * been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
187
- * quotas</a>.</p>
184
+ * <p>The <code>RunTask</code> could not be processed because you use managed
185
+ * scaling and there is a capacity error because the quota of tasks in the
186
+ * <code>PROVISIONING</code> per cluster has been reached. For information
187
+ * about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
188
+ * service quotas</a>.</p>
188
189
  * </li>
189
190
  * </ul>
190
191
  *
191
192
  * @throws {@link InvalidParameterException} (client fault)
192
- * <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
193
+ * <p>The specified parameter isn't valid. Review the available parameters for the API
194
+ * request.</p>
193
195
  *
194
196
  * @throws {@link ServerException} (server fault)
195
197
  * <p>These errors are usually caused by a server issue.</p>
package/dist-types/commands/RegisterTaskDefinitionCommand.d.ts CHANGED
@@ -28,20 +28,21 @@ declare const RegisterTaskDefinitionCommand_base: {
28
28
  };
29
29
  /**
30
30
  * <p>Registers a new task definition from the supplied <code>family</code> and
31
- * <code>containerDefinitions</code>. Optionally, you can add data volumes to your containers with the
32
- * <code>volumes</code> parameter. For more information about task definition parameters and defaults,
33
- * see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task_defintions.html">Amazon ECS Task
31
+ * <code>containerDefinitions</code>. Optionally, you can add data volumes to your
32
+ * containers with the <code>volumes</code> parameter. For more information about task
33
+ * definition parameters and defaults, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task_defintions.html">Amazon ECS Task
34
34
  * Definitions</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
35
- * <p>You can specify a role for your task with the <code>taskRoleArn</code> parameter. When you specify a
36
- * role for a task, its containers can then use the latest versions of the CLI or SDKs to make API
37
- * requests to the Amazon Web Services services that are specified in the policy that's associated with the role. For
38
- * more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-iam-roles.html">IAM Roles for Tasks</a> in the
39
- * <i>Amazon Elastic Container Service Developer Guide</i>.</p>
40
- * <p>You can specify a Docker networking mode for the containers in your task definition with the
41
- * <code>networkMode</code> parameter. If you specify the <code>awsvpc</code> network mode, the task
42
- * is allocated an elastic network interface, and you must specify a <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_NetworkConfiguration.html">NetworkConfiguration</a> when
43
- * you create a service or run a task with the task definition. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-networking.html">Task
44
- * Networking</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
35
+ * <p>You can specify a role for your task with the <code>taskRoleArn</code> parameter. When
36
+ * you specify a role for a task, its containers can then use the latest versions of the
37
+ * CLI or SDKs to make API requests to the Amazon Web Services services that are specified in the
38
+ * policy that's associated with the role. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-iam-roles.html">IAM
39
+ * Roles for Tasks</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
40
+ * <p>You can specify a Docker networking mode for the containers in your task definition
41
+ * with the <code>networkMode</code> parameter. If you specify the <code>awsvpc</code>
42
+ * network mode, the task is allocated an elastic network interface, and you must specify a
43
+ * <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_NetworkConfiguration.html">NetworkConfiguration</a> when you create a service or run a task with the task
44
+ * definition. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-networking.html">Task Networking</a>
45
+ * in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
45
46
  * @example
46
47
  * Use a bare-bones client and the command you need to make an API call.
47
48
  * ```javascript
@@ -599,21 +600,23 @@ declare const RegisterTaskDefinitionCommand_base: {
599
600
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
600
601
  *
601
602
  * @throws {@link ClientException} (client fault)
602
- * <p>These errors are usually caused by a client action. This client action might be using an action or
603
- * resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
604
- * be specifying an identifier that isn't valid.</p>
603
+ * <p>These errors are usually caused by a client action. This client action might be using
604
+ * an action or resource on behalf of a user that doesn't have permissions to use the
605
+ * action or resource. Or, it might be specifying an identifier that isn't valid.</p>
605
606
  * <p>The following list includes additional causes for the error:</p>
606
607
  * <ul>
607
608
  * <li>
608
- * <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
609
- * a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
610
- * been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
611
- * quotas</a>.</p>
609
+ * <p>The <code>RunTask</code> could not be processed because you use managed
610
+ * scaling and there is a capacity error because the quota of tasks in the
611
+ * <code>PROVISIONING</code> per cluster has been reached. For information
612
+ * about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
613
+ * service quotas</a>.</p>
612
614
  * </li>
613
615
  * </ul>
614
616
  *
615
617
  * @throws {@link InvalidParameterException} (client fault)
616
- * <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
618
+ * <p>The specified parameter isn't valid. Review the available parameters for the API
619
+ * request.</p>
617
620
  *
618
621
  * @throws {@link ServerException} (server fault)
619
622
  * <p>These errors are usually caused by a server issue.</p>
package/dist-types/commands/RunTaskCommand.d.ts CHANGED
@@ -34,31 +34,33 @@ declare const RunTaskCommand_base: {
34
34
  * <note>
35
35
  * <p>Amazon Elastic Inference (EI) is no longer available to customers.</p>
36
36
  * </note>
37
- * <p>You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places tasks using
38
- * placement constraints and placement strategies. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/scheduling_tasks.html">Scheduling
39
- * Tasks</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
40
- * <p>Alternatively, you can use <code>StartTask</code> to use your own scheduler or place tasks manually
41
- * on specific container instances.</p>
42
- * <p>You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or updating a
43
- * service. For more infomation, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS
44
- * volumes</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
45
- * <p>The Amazon ECS API follows an eventual consistency model. This is because of the distributed nature of the
46
- * system supporting the API. This means that the result of an API command you run that affects your Amazon ECS
47
- * resources might not be immediately visible to all subsequent commands you run. Keep this in mind when
48
- * you carry out an API command that immediately follows a previous API command.</p>
37
+ * <p>You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places
38
+ * tasks using placement constraints and placement strategies. For more information, see
39
+ * <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/scheduling_tasks.html">Scheduling Tasks</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
40
+ * <p>Alternatively, you can use <code>StartTask</code> to use your own scheduler or place
41
+ * tasks manually on specific container instances.</p>
42
+ * <p>You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or
43
+ * updating a service. For more infomation, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS volumes</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
44
+ * <p>The Amazon ECS API follows an eventual consistency model. This is because of the
45
+ * distributed nature of the system supporting the API. This means that the result of an
46
+ * API command you run that affects your Amazon ECS resources might not be immediately visible
47
+ * to all subsequent commands you run. Keep this in mind when you carry out an API command
48
+ * that immediately follows a previous API command.</p>
49
49
  * <p>To manage eventual consistency, you can do the following:</p>
50
50
  * <ul>
51
51
  * <li>
52
- * <p>Confirm the state of the resource before you run a command to modify it. Run the
53
- * DescribeTasks command using an exponential backoff algorithm to ensure that you allow enough
54
- * time for the previous command to propagate through the system. To do this, run the
55
- * DescribeTasks command repeatedly, starting with a couple of seconds of wait time and increasing
56
- * gradually up to five minutes of wait time.</p>
52
+ * <p>Confirm the state of the resource before you run a command to modify it. Run
53
+ * the DescribeTasks command using an exponential backoff algorithm to ensure that
54
+ * you allow enough time for the previous command to propagate through the system.
55
+ * To do this, run the DescribeTasks command repeatedly, starting with a couple of
56
+ * seconds of wait time and increasing gradually up to five minutes of wait
57
+ * time.</p>
57
58
  * </li>
58
59
  * <li>
59
- * <p>Add wait time between subsequent commands, even if the DescribeTasks command returns an
60
- * accurate response. Apply an exponential backoff algorithm starting with a couple of seconds of
61
- * wait time, and increase gradually up to about five minutes of wait time.</p>
60
+ * <p>Add wait time between subsequent commands, even if the DescribeTasks command
61
+ * returns an accurate response. Apply an exponential backoff algorithm starting
62
+ * with a couple of seconds of wait time, and increase gradually up to about five
63
+ * minutes of wait time.</p>
62
64
  * </li>
63
65
  * </ul>
64
66
  * @example
@@ -382,16 +384,17 @@ declare const RunTaskCommand_base: {
382
384
  * Amazon Web Services Support</a>.</p>
383
385
  *
384
386
  * @throws {@link ClientException} (client fault)
385
- * <p>These errors are usually caused by a client action. This client action might be using an action or
386
- * resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
387
- * be specifying an identifier that isn't valid.</p>
387
+ * <p>These errors are usually caused by a client action. This client action might be using
388
+ * an action or resource on behalf of a user that doesn't have permissions to use the
389
+ * action or resource. Or, it might be specifying an identifier that isn't valid.</p>
388
390
  * <p>The following list includes additional causes for the error:</p>
389
391
  * <ul>
390
392
  * <li>
391
- * <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
392
- * a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
393
- * been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
394
- * quotas</a>.</p>
393
+ * <p>The <code>RunTask</code> could not be processed because you use managed
394
+ * scaling and there is a capacity error because the quota of tasks in the
395
+ * <code>PROVISIONING</code> per cluster has been reached. For information
396
+ * about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
397
+ * service quotas</a>.</p>
395
398
  * </li>
396
399
  * </ul>
397
400
  *
@@ -400,22 +403,23 @@ declare const RunTaskCommand_base: {
400
403
  *
401
404
  * @throws {@link ConflictException} (client fault)
402
405
  * <p>The <code>RunTask</code> request could not be processed due to conflicts. The provided
403
- * <code>clientToken</code> is already in use with a different <code>RunTask</code> request. The
404
- * <code>resourceIds</code> are the existing task ARNs which are already associated with the
405
- * <code>clientToken</code>. </p>
406
+ * <code>clientToken</code> is already in use with a different <code>RunTask</code>
407
+ * request. The <code>resourceIds</code> are the existing task ARNs which are already
408
+ * associated with the <code>clientToken</code>. </p>
406
409
  * <p>To fix this issue:</p>
407
410
  * <ul>
408
411
  * <li>
409
412
  * <p>Run <code>RunTask</code> with a unique <code>clientToken</code>.</p>
410
413
  * </li>
411
414
  * <li>
412
- * <p>Run <code>RunTask</code> with the <code>clientToken</code> and the original set of
413
- * parameters</p>
415
+ * <p>Run <code>RunTask</code> with the <code>clientToken</code> and the original
416
+ * set of parameters</p>
414
417
  * </li>
415
418
  * </ul>
416
419
  *
417
420
  * @throws {@link InvalidParameterException} (client fault)
418
- * <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
421
+ * <p>The specified parameter isn't valid. Review the available parameters for the API
422
+ * request.</p>
419
423
  *
420
424
  * @throws {@link PlatformTaskDefinitionIncompatibilityException} (client fault)
421
425
  * <p>The specified platform version doesn't satisfy the required capabilities of the task
package/dist-types/commands/StartTaskCommand.d.ts CHANGED
@@ -27,20 +27,18 @@ declare const StartTaskCommand_base: {
27
27
  getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
28
28
  };
29
29
  /**
30
- * <p>Starts a new task from the specified task definition on the specified container instance or
31
- * instances.</p>
30
+ * <p>Starts a new task from the specified task definition on the specified container
31
+ * instance or instances.</p>
32
32
  * <note>
33
33
  * <p>On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.</p>
34
34
  * </note>
35
35
  * <note>
36
36
  * <p>Amazon Elastic Inference (EI) is no longer available to customers.</p>
37
37
  * </note>
38
- * <p>Alternatively, you can use<code>RunTask</code> to place tasks for you. For more information, see
39
- * <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/scheduling_tasks.html">Scheduling
40
- * Tasks</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
41
- * <p>You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or updating a
42
- * service. For more infomation, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS
43
- * volumes</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
38
+ * <p>Alternatively, you can use<code>RunTask</code> to place tasks for you. For more
39
+ * information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/scheduling_tasks.html">Scheduling Tasks</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
40
+ * <p>You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or
41
+ * updating a service. For more infomation, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS volumes</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
44
42
  * @example
45
43
  * Use a bare-bones client and the command you need to make an API call.
46
44
  * ```javascript
@@ -333,16 +331,17 @@ declare const StartTaskCommand_base: {
333
331
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
334
332
  *
335
333
  * @throws {@link ClientException} (client fault)
336
- * <p>These errors are usually caused by a client action. This client action might be using an action or
337
- * resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
338
- * be specifying an identifier that isn't valid.</p>
334
+ * <p>These errors are usually caused by a client action. This client action might be using
335
+ * an action or resource on behalf of a user that doesn't have permissions to use the
336
+ * action or resource. Or, it might be specifying an identifier that isn't valid.</p>
339
337
  * <p>The following list includes additional causes for the error:</p>
340
338
  * <ul>
341
339
  * <li>
342
- * <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
343
- * a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
344
- * been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
345
- * quotas</a>.</p>
340
+ * <p>The <code>RunTask</code> could not be processed because you use managed
341
+ * scaling and there is a capacity error because the quota of tasks in the
342
+ * <code>PROVISIONING</code> per cluster has been reached. For information
343
+ * about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
344
+ * service quotas</a>.</p>
346
345
  * </li>
347
346
  * </ul>
348
347
  *
@@ -350,7 +349,8 @@ declare const StartTaskCommand_base: {
350
349
  * <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
351
350
  *
352
351
  * @throws {@link InvalidParameterException} (client fault)
353
- * <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
352
+ * <p>The specified parameter isn't valid. Review the available parameters for the API
353
+ * request.</p>
354
354
  *
355
355
  * @throws {@link ServerException} (server fault)
356
356
  * <p>These errors are usually caused by a server issue.</p>
package/dist-types/commands/StopTaskCommand.d.ts CHANGED
@@ -28,18 +28,20 @@ declare const StopTaskCommand_base: {
28
28
  };
29
29
  /**
30
30
  * <p>Stops a running task. Any tags associated with the task will be deleted.</p>
31
- * <p>When you call <code>StopTask</code> on a task, the equivalent of <code>docker stop</code> is issued
32
- * to the containers running in the task. This results in a <code>SIGTERM</code> value and a default
33
- * 30-second timeout, after which the <code>SIGKILL</code> value is sent and the containers are forcibly
34
- * stopped. If the container handles the <code>SIGTERM</code> value gracefully and exits within 30 seconds
31
+ * <p>When you call <code>StopTask</code> on a task, the equivalent of <code>docker
32
+ * stop</code> is issued to the containers running in the task. This results in a
33
+ * <code>SIGTERM</code> value and a default 30-second timeout, after which the
34
+ * <code>SIGKILL</code> value is sent and the containers are forcibly stopped. If the
35
+ * container handles the <code>SIGTERM</code> value gracefully and exits within 30 seconds
35
36
  * from receiving it, no <code>SIGKILL</code> value is sent.</p>
36
- * <p>For Windows containers, POSIX signals do not work and runtime stops the container by sending a
37
- * <code>CTRL_SHUTDOWN_EVENT</code>. For more information, see <a href="https://github.com/moby/moby/issues/25982">Unable to react to graceful shutdown of (Windows)
38
- * container #25982</a> on GitHub.</p>
37
+ * <p>For Windows containers, POSIX signals do not work and runtime stops the container by
38
+ * sending a <code>CTRL_SHUTDOWN_EVENT</code>. For more information, see <a href="https://github.com/moby/moby/issues/25982">Unable to react to graceful shutdown
39
+ * of (Windows) container #25982</a> on GitHub.</p>
39
40
  * <note>
40
- * <p>The default 30-second timeout can be configured on the Amazon ECS container agent with the
41
- * <code>ECS_CONTAINER_STOP_TIMEOUT</code> variable. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-config.html">Amazon ECS
42
- * Container Agent Configuration</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
41
+ * <p>The default 30-second timeout can be configured on the Amazon ECS container agent with
42
+ * the <code>ECS_CONTAINER_STOP_TIMEOUT</code> variable. For more information, see
43
+ * <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-config.html">Amazon ECS Container Agent Configuration</a> in the
44
+ * <i>Amazon Elastic Container Service Developer Guide</i>.</p>
43
45
  * </note>
44
46
  * @example
45
47
  * Use a bare-bones client and the command you need to make an API call.
@@ -226,16 +228,17 @@ declare const StopTaskCommand_base: {
226
228
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
227
229
  *
228
230
  * @throws {@link ClientException} (client fault)
229
- * <p>These errors are usually caused by a client action. This client action might be using an action or
230
- * resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
231
- * be specifying an identifier that isn't valid.</p>
231
+ * <p>These errors are usually caused by a client action. This client action might be using
232
+ * an action or resource on behalf of a user that doesn't have permissions to use the
233
+ * action or resource. Or, it might be specifying an identifier that isn't valid.</p>
232
234
  * <p>The following list includes additional causes for the error:</p>
233
235
  * <ul>
234
236
  * <li>
235
- * <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
236
- * a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
237
- * been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
238
- * quotas</a>.</p>
237
+ * <p>The <code>RunTask</code> could not be processed because you use managed
238
+ * scaling and there is a capacity error because the quota of tasks in the
239
+ * <code>PROVISIONING</code> per cluster has been reached. For information
240
+ * about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
241
+ * service quotas</a>.</p>
239
242
  * </li>
240
243
  * </ul>
241
244
  *
@@ -243,7 +246,8 @@ declare const StopTaskCommand_base: {
243
246
  * <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
244
247
  *
245
248
  * @throws {@link InvalidParameterException} (client fault)
246
- * <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
249
+ * <p>The specified parameter isn't valid. Review the available parameters for the API
250
+ * request.</p>
247
251
  *
248
252
  * @throws {@link ServerException} (server fault)
249
253
  * <p>These errors are usually caused by a server issue.</p>
package/dist-types/commands/SubmitAttachmentStateChangesCommand.d.ts CHANGED
@@ -64,21 +64,23 @@ declare const SubmitAttachmentStateChangesCommand_base: {
64
64
  * <p>You don't have authorization to perform the requested action.</p>
65
65
  *
66
66
  * @throws {@link ClientException} (client fault)
67
- * <p>These errors are usually caused by a client action. This client action might be using an action or
68
- * resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
69
- * be specifying an identifier that isn't valid.</p>
67
+ * <p>These errors are usually caused by a client action. This client action might be using
68
+ * an action or resource on behalf of a user that doesn't have permissions to use the
69
+ * action or resource. Or, it might be specifying an identifier that isn't valid.</p>
70
70
  * <p>The following list includes additional causes for the error:</p>
71
71
  * <ul>
72
72
  * <li>
73
- * <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
74
- * a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
75
- * been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
76
- * quotas</a>.</p>
73
+ * <p>The <code>RunTask</code> could not be processed because you use managed
74
+ * scaling and there is a capacity error because the quota of tasks in the
75
+ * <code>PROVISIONING</code> per cluster has been reached. For information
76
+ * about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
77
+ * service quotas</a>.</p>
77
78
  * </li>
78
79
  * </ul>
79
80
  *
80
81
  * @throws {@link InvalidParameterException} (client fault)
81
- * <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
82
+ * <p>The specified parameter isn't valid. Review the available parameters for the API
83
+ * request.</p>
82
84
  *
83
85
  * @throws {@link ServerException} (server fault)
84
86
  * <p>These errors are usually caused by a server issue.</p>
package/dist-types/commands/SubmitContainerStateChangeCommand.d.ts CHANGED
@@ -74,16 +74,17 @@ declare const SubmitContainerStateChangeCommand_base: {
74
74
  * <p>You don't have authorization to perform the requested action.</p>
75
75
  *
76
76
  * @throws {@link ClientException} (client fault)
77
- * <p>These errors are usually caused by a client action. This client action might be using an action or
78
- * resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
79
- * be specifying an identifier that isn't valid.</p>
77
+ * <p>These errors are usually caused by a client action. This client action might be using
78
+ * an action or resource on behalf of a user that doesn't have permissions to use the
79
+ * action or resource. Or, it might be specifying an identifier that isn't valid.</p>
80
80
  * <p>The following list includes additional causes for the error:</p>
81
81
  * <ul>
82
82
  * <li>
83
- * <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
84
- * a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
85
- * been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
86
- * quotas</a>.</p>
83
+ * <p>The <code>RunTask</code> could not be processed because you use managed
84
+ * scaling and there is a capacity error because the quota of tasks in the
85
+ * <code>PROVISIONING</code> per cluster has been reached. For information
86
+ * about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
87
+ * service quotas</a>.</p>
87
88
  * </li>
88
89
  * </ul>
89
90
  *
package/dist-types/commands/SubmitTaskStateChangeCommand.d.ts CHANGED
@@ -98,21 +98,23 @@ declare const SubmitTaskStateChangeCommand_base: {
98
98
  * <p>You don't have authorization to perform the requested action.</p>
99
99
  *
100
100
  * @throws {@link ClientException} (client fault)
101
- * <p>These errors are usually caused by a client action. This client action might be using an action or
102
- * resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
103
- * be specifying an identifier that isn't valid.</p>
101
+ * <p>These errors are usually caused by a client action. This client action might be using
102
+ * an action or resource on behalf of a user that doesn't have permissions to use the
103
+ * action or resource. Or, it might be specifying an identifier that isn't valid.</p>
104
104
  * <p>The following list includes additional causes for the error:</p>
105
105
  * <ul>
106
106
  * <li>
107
- * <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
108
- * a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
109
- * been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
110
- * quotas</a>.</p>
107
+ * <p>The <code>RunTask</code> could not be processed because you use managed
108
+ * scaling and there is a capacity error because the quota of tasks in the
109
+ * <code>PROVISIONING</code> per cluster has been reached. For information
110
+ * about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
111
+ * service quotas</a>.</p>
111
112
  * </li>
112
113
  * </ul>
113
114
  *
114
115
  * @throws {@link InvalidParameterException} (client fault)
115
- * <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
116
+ * <p>The specified parameter isn't valid. Review the available parameters for the API
117
+ * request.</p>
116
118
  *
117
119
  * @throws {@link ServerException} (server fault)
118
120
  * <p>These errors are usually caused by a server issue.</p>
package/dist-types/commands/TagResourceCommand.d.ts CHANGED
@@ -27,9 +27,10 @@ declare const TagResourceCommand_base: {
27
27
  getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
28
28
  };
29
29
  /**
30
- * <p>Associates the specified tags to a resource with the specified <code>resourceArn</code>. If existing
31
- * tags on a resource aren't specified in the request parameters, they aren't changed. When a resource is
32
- * deleted, the tags that are associated with that resource are deleted as well.</p>
30
+ * <p>Associates the specified tags to a resource with the specified
31
+ * <code>resourceArn</code>. If existing tags on a resource aren't specified in the
32
+ * request parameters, they aren't changed. When a resource is deleted, the tags that are
33
+ * associated with that resource are deleted as well.</p>
33
34
  * @example
34
35
  * Use a bare-bones client and the command you need to make an API call.
35
36
  * ```javascript
@@ -58,16 +59,17 @@ declare const TagResourceCommand_base: {
58
59
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
59
60
  *
60
61
  * @throws {@link ClientException} (client fault)
61
- * <p>These errors are usually caused by a client action. This client action might be using an action or
62
- * resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
63
- * be specifying an identifier that isn't valid.</p>
62
+ * <p>These errors are usually caused by a client action. This client action might be using
63
+ * an action or resource on behalf of a user that doesn't have permissions to use the
64
+ * action or resource. Or, it might be specifying an identifier that isn't valid.</p>
64
65
  * <p>The following list includes additional causes for the error:</p>
65
66
  * <ul>
66
67
  * <li>
67
- * <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
68
- * a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
69
- * been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
70
- * quotas</a>.</p>
68
+ * <p>The <code>RunTask</code> could not be processed because you use managed
69
+ * scaling and there is a capacity error because the quota of tasks in the
70
+ * <code>PROVISIONING</code> per cluster has been reached. For information
71
+ * about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
72
+ * service quotas</a>.</p>
71
73
  * </li>
72
74
  * </ul>
73
75
  *
@@ -75,7 +77,8 @@ declare const TagResourceCommand_base: {
75
77
  * <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
76
78
  *
77
79
  * @throws {@link InvalidParameterException} (client fault)
78
- * <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
80
+ * <p>The specified parameter isn't valid. Review the available parameters for the API
81
+ * request.</p>
79
82
  *
80
83
  * @throws {@link ResourceNotFoundException} (client fault)
81
84
  * <p>The specified resource wasn't found.</p>