npm - @aws-sdk/client-ecs - Versions diffs - 3.693.0 → 3.695.0 - Mend

@aws-sdk/client-ecs 3.693.0 → 3.695.0

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.

Files changed (71) hide show

package/dist-types/commands/PutAttributesCommand.d.ts CHANGED Viewed

@@ -27,10 +27,9 @@ declare const PutAttributesCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Create or update an attribute on an Amazon ECS resource. If the attribute doesn't exist,
- * 			it's created. If the attribute exists, its value is replaced with the specified value.
- * 			To delete an attribute, use <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DeleteAttributes.html">DeleteAttributes</a>. For more information,
- * 			see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-placement-constraints.html#attributes">Attributes</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ * <p>Create or update an attribute on an Amazon ECS resource. If the attribute doesn't exist, it's created. If
+ * 			the attribute exists, its value is replaced with the specified value. To delete an attribute, use
+ * 				<a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DeleteAttributes.html">DeleteAttributes</a>. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-placement-constraints.html#attributes">Attributes</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -70,20 +69,17 @@ declare const PutAttributesCommand_base: {
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
  * @throws {@link AttributeLimitExceededException} (client fault)
- *  <p>You can apply up to 10 custom attributes for each resource. You can view the
- * 			attributes of a resource with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListAttributes.html">ListAttributes</a>. You can remove existing
- * 			attributes on a resource with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DeleteAttributes.html">DeleteAttributes</a>.</p>
+ *  <p>You can apply up to 10 custom attributes for each resource. You can view the attributes of a resource
+ * 			with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListAttributes.html">ListAttributes</a>. You can remove existing attributes on a resource with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_DeleteAttributes.html">DeleteAttributes</a>.</p>
  *
  * @throws {@link ClusterNotFoundException} (client fault)
  *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
  *
  * @throws {@link TargetNotFoundException} (client fault)
- *  <p>The specified target wasn't found. You can view your available container instances
- * 			with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListContainerInstances.html">ListContainerInstances</a>. Amazon ECS container instances are cluster-specific and
+ *  <p>The specified target wasn't found. You can view your available container instances with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListContainerInstances.html">ListContainerInstances</a>. Amazon ECS container instances are cluster-specific and
  * 			Region-specific.</p>
  *
  * @throws {@link ECSServiceException}

package/dist-types/commands/PutClusterCapacityProvidersCommand.d.ts CHANGED Viewed

@@ -27,20 +27,18 @@ declare const PutClusterCapacityProvidersCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Modifies the available capacity providers and the default capacity provider strategy
- * 			for a cluster.</p>
- *          <p>You must specify both the available capacity providers and a default capacity provider
- * 			strategy for the cluster. If the specified cluster has existing capacity providers
- * 			associated with it, you must specify all existing capacity providers in addition to any
- * 			new ones you want to add. Any existing capacity providers that are associated with a
- * 			cluster that are omitted from a <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_PutClusterCapacityProviders.html">PutClusterCapacityProviders</a> API call
- * 			will be disassociated with the cluster. You can only disassociate an existing capacity
- * 			provider from a cluster if it's not being used by any existing tasks.</p>
- *          <p>When creating a service or running a task on a cluster, if no capacity provider or
- * 			launch type is specified, then the cluster's default capacity provider strategy is used.
- * 			We recommend that you define a default capacity provider strategy for your cluster.
- * 			However, you must specify an empty array (<code>[]</code>) to bypass defining a default
- * 			strategy.</p>
+ * <p>Modifies the available capacity providers and the default capacity provider strategy for a
+ * 			cluster.</p>
+ *          <p>You must specify both the available capacity providers and a default capacity provider strategy for
+ * 			the cluster. If the specified cluster has existing capacity providers associated with it, you must
+ * 			specify all existing capacity providers in addition to any new ones you want to add. Any existing
+ * 			capacity providers that are associated with a cluster that are omitted from a <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_PutClusterCapacityProviders.html">PutClusterCapacityProviders</a> API call will be disassociated with the cluster. You can only
+ * 			disassociate an existing capacity provider from a cluster if it's not being used by any existing
+ * 			tasks.</p>
+ *          <p>When creating a service or running a task on a cluster, if no capacity provider or launch type is
+ * 			specified, then the cluster's default capacity provider strategy is used. We recommend that you define
+ * 			a default capacity provider strategy for your cluster. However, you must specify an empty array
+ * 				(<code>[]</code>) to bypass defining a default strategy.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -145,17 +143,16 @@ declare const PutClusterCapacityProvidersCommand_base: {
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or
+ * 			resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
+ * 			be specifying an identifier that isn't valid.</p>
  *          <p>The following list includes additional causes for the error:</p>
  *          <ul>
  *             <li>
- *                <p>The <code>RunTask</code> could not be processed because you use managed
- * 					scaling and there is a capacity error because the quota of tasks in the
- * 					<code>PROVISIONING</code> per cluster has been reached. For information
- * 					about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
- * 						service quotas</a>.</p>
+ *                <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
+ * 					a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
+ * 					been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
+ * 						quotas</a>.</p>
  *             </li>
  *          </ul>
  *
@@ -163,8 +160,7 @@ declare const PutClusterCapacityProvidersCommand_base: {
  *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
  *
  * @throws {@link ResourceInUseException} (client fault)
  *  <p>The specified resource is in-use and can't be removed.</p>
@@ -173,11 +169,10 @@ declare const PutClusterCapacityProvidersCommand_base: {
  *  <p>These errors are usually caused by a server issue.</p>
  *
  * @throws {@link UpdateInProgressException} (client fault)
- *  <p>There's already a current Amazon ECS container agent update in progress on the container
- * 			instance that's specified. If the container agent becomes disconnected while it's in a
- * 			transitional stage, such as <code>PENDING</code> or <code>STAGING</code>, the update
- * 			process can get stuck in that state. However, when the agent reconnects, it resumes
- * 			where it stopped previously.</p>
+ *  <p>There's already a current Amazon ECS container agent update in progress on the container instance that's
+ * 			specified. If the container agent becomes disconnected while it's in a transitional stage, such as
+ * 				<code>PENDING</code> or <code>STAGING</code>, the update process can get stuck in that state.
+ * 			However, when the agent reconnects, it resumes where it stopped previously.</p>
  *
  * @throws {@link ECSServiceException}
  * <p>Base exception class for all service exceptions from ECS service.</p>

package/dist-types/commands/RegisterContainerInstanceCommand.d.ts CHANGED Viewed

@@ -30,8 +30,8 @@ declare const RegisterContainerInstanceCommand_base: {
  * <note>
  *             <p>This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.</p>
  *          </note>
- *          <p>Registers an EC2 instance into the specified cluster. This instance becomes available
- * 			to place containers on.</p>
+ *          <p>Registers an EC2 instance into the specified cluster. This instance becomes available to place
+ * 			containers on.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -175,23 +175,21 @@ declare const RegisterContainerInstanceCommand_base: {
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or
+ * 			resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
+ * 			be specifying an identifier that isn't valid.</p>
  *          <p>The following list includes additional causes for the error:</p>
  *          <ul>
  *             <li>
- *                <p>The <code>RunTask</code> could not be processed because you use managed
- * 					scaling and there is a capacity error because the quota of tasks in the
- * 					<code>PROVISIONING</code> per cluster has been reached. For information
- * 					about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
- * 						service quotas</a>.</p>
+ *                <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
+ * 					a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
+ * 					been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
+ * 						quotas</a>.</p>
  *             </li>
  *          </ul>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/dist-types/commands/RegisterTaskDefinitionCommand.d.ts CHANGED Viewed

@@ -28,20 +28,20 @@ declare const RegisterTaskDefinitionCommand_base: {
 };
 /**
  * <p>Registers a new task definition from the supplied <code>family</code> and
- * 				<code>containerDefinitions</code>. Optionally, you can add data volumes to your
- * 			containers with the <code>volumes</code> parameter. For more information about task
- * 			definition parameters and defaults, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task_defintions.html">Amazon ECS Task
+ * 				<code>containerDefinitions</code>. Optionally, you can add data volumes to your containers with the
+ * 				<code>volumes</code> parameter. For more information about task definition parameters and defaults,
+ * 			see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task_defintions.html">Amazon ECS Task
  * 				Definitions</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
- *          <p>You can specify a role for your task with the <code>taskRoleArn</code> parameter. When
- * 			you specify a role for a task, its containers can then use the latest versions of the
- * 			CLI or SDKs to make API requests to the Amazon Web Services services that are specified in the
- * 			policy that's associated with the role. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-iam-roles.html">IAM
- * 				Roles for Tasks</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
- *          <p>You can specify a Docker networking mode for the containers in your task definition
- * 			with the <code>networkMode</code> parameter. If you specify the <code>awsvpc</code>
- * 			network mode, the task is allocated an elastic network interface, and you must specify a <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_NetworkConfiguration.html">NetworkConfiguration</a> when you create a service or run a task with
- * 			the task definition. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-networking.html">Task Networking</a>
- * 			in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ *          <p>You can specify a role for your task with the <code>taskRoleArn</code> parameter. When you specify a
+ * 			role for a task, its containers can then use the latest versions of the CLI or SDKs to make API
+ * 			requests to the Amazon Web Services services that are specified in the policy that's associated with the role. For
+ * 			more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-iam-roles.html">IAM Roles for Tasks</a> in the
+ * 			<i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ *          <p>You can specify a Docker networking mode for the containers in your task definition with the
+ * 				<code>networkMode</code> parameter. If you specify the <code>awsvpc</code> network mode, the task
+ * 			is allocated an elastic network interface, and you must specify a <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_NetworkConfiguration.html">NetworkConfiguration</a> when
+ * 			you create a service or run a task with the task definition. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-networking.html">Task
+ * 				Networking</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -597,23 +597,21 @@ declare const RegisterTaskDefinitionCommand_base: {
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or
+ * 			resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
+ * 			be specifying an identifier that isn't valid.</p>
  *          <p>The following list includes additional causes for the error:</p>
  *          <ul>
  *             <li>
- *                <p>The <code>RunTask</code> could not be processed because you use managed
- * 					scaling and there is a capacity error because the quota of tasks in the
- * 					<code>PROVISIONING</code> per cluster has been reached. For information
- * 					about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
- * 						service quotas</a>.</p>
+ *                <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
+ * 					a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
+ * 					been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
+ * 						quotas</a>.</p>
  *             </li>
  *          </ul>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/dist-types/commands/RunTaskCommand.d.ts CHANGED Viewed

@@ -34,33 +34,31 @@ declare const RunTaskCommand_base: {
  *          <note>
  *             <p>Amazon Elastic Inference (EI) is no longer available to customers.</p>
  *          </note>
- *          <p>You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places
- * 			tasks using placement constraints and placement strategies. For more information, see
- * 				<a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/scheduling_tasks.html">Scheduling Tasks</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
- *          <p>Alternatively, you can use <code>StartTask</code> to use your own scheduler or
- * 			place tasks manually on specific container instances.</p>
- *          <p>You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or
- * 			updating a service. For more infomation, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS volumes</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
- *          <p>The Amazon ECS API follows an eventual consistency model. This is because of the
- * 			distributed nature of the system supporting the API. This means that the result of an
- * 			API command you run that affects your Amazon ECS resources might not be immediately visible
- * 			to all subsequent commands you run. Keep this in mind when you carry out an API command
- * 			that immediately follows a previous API command.</p>
+ *          <p>You can allow Amazon ECS to place tasks for you, or you can customize how Amazon ECS places tasks using
+ * 			placement constraints and placement strategies. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/scheduling_tasks.html">Scheduling
+ * 				Tasks</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ *          <p>Alternatively, you can use <code>StartTask</code> to use your own scheduler or place tasks manually
+ * 			on specific container instances.</p>
+ *          <p>You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or updating a
+ * 			service. For more infomation, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS
+ * 				volumes</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ *          <p>The Amazon ECS API follows an eventual consistency model. This is because of the distributed nature of the
+ * 			system supporting the API. This means that the result of an API command you run that affects your Amazon ECS
+ * 			resources might not be immediately visible to all subsequent commands you run. Keep this in mind when
+ * 			you carry out an API command that immediately follows a previous API command.</p>
  *          <p>To manage eventual consistency, you can do the following:</p>
  *          <ul>
  *             <li>
- *                <p>Confirm the state of the resource before you run a command to modify it. Run
- * 					the DescribeTasks command using an exponential backoff algorithm to ensure that
- * 					you allow enough time for the previous command to propagate through the system.
- * 					To do this, run the DescribeTasks command repeatedly, starting with a couple of
- * 					seconds of wait time and increasing gradually up to five minutes of wait
- * 					time.</p>
+ *                <p>Confirm the state of the resource before you run a command to modify it. Run the
+ * 					DescribeTasks command using an exponential backoff algorithm to ensure that you allow enough
+ * 					time for the previous command to propagate through the system. To do this, run the
+ * 					DescribeTasks command repeatedly, starting with a couple of seconds of wait time and increasing
+ * 					gradually up to five minutes of wait time.</p>
  *             </li>
  *             <li>
- *                <p>Add wait time between subsequent commands, even if the DescribeTasks command
- * 					returns an accurate response. Apply an exponential backoff algorithm starting
- * 					with a couple of seconds of wait time, and increase gradually up to about five
- * 					minutes of wait time.</p>
+ *                <p>Add wait time between subsequent commands, even if the DescribeTasks command returns an
+ * 					accurate response. Apply an exponential backoff algorithm starting with a couple of seconds of
+ * 					wait time, and increase gradually up to about five minutes of wait time.</p>
  *             </li>
  *          </ul>
  * @example
@@ -384,17 +382,16 @@ declare const RunTaskCommand_base: {
  * 				Amazon Web Services Support</a>.</p>
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or
+ * 			resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
+ * 			be specifying an identifier that isn't valid.</p>
  *          <p>The following list includes additional causes for the error:</p>
  *          <ul>
  *             <li>
- *                <p>The <code>RunTask</code> could not be processed because you use managed
- * 					scaling and there is a capacity error because the quota of tasks in the
- * 					<code>PROVISIONING</code> per cluster has been reached. For information
- * 					about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
- * 						service quotas</a>.</p>
+ *                <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
+ * 					a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
+ * 					been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
+ * 						quotas</a>.</p>
  *             </li>
  *          </ul>
  *
@@ -403,23 +400,22 @@ declare const RunTaskCommand_base: {
  *
  * @throws {@link ConflictException} (client fault)
  *  <p>The <code>RunTask</code> request could not be processed due to conflicts. The provided
- * 				<code>clientToken</code> is already in use with a different <code>RunTask</code>
- * 			request. The <code>resourceIds</code> are the existing task ARNs which are already
- * 			associated with the <code>clientToken</code>. </p>
+ * 				<code>clientToken</code> is already in use with a different <code>RunTask</code> request. The
+ * 				<code>resourceIds</code> are the existing task ARNs which are already associated with the
+ * 				<code>clientToken</code>. </p>
  *          <p>To fix this issue:</p>
  *          <ul>
  *             <li>
  *                <p>Run <code>RunTask</code> with a unique <code>clientToken</code>.</p>
  *             </li>
  *             <li>
- *                <p>Run <code>RunTask</code> with the <code>clientToken</code> and the original
- * 					set of parameters</p>
+ *                <p>Run <code>RunTask</code> with the <code>clientToken</code> and the original set of
+ * 					parameters</p>
  *             </li>
  *          </ul>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
  *
  * @throws {@link PlatformTaskDefinitionIncompatibilityException} (client fault)
  *  <p>The specified platform version doesn't satisfy the required capabilities of the task

package/dist-types/commands/StartTaskCommand.d.ts CHANGED Viewed

@@ -27,18 +27,20 @@ declare const StartTaskCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Starts a new task from the specified task definition on the specified container
- * 			instance or instances.</p>
+ * <p>Starts a new task from the specified task definition on the specified container instance or
+ * 			instances.</p>
  *          <note>
  *             <p>On March 21, 2024, a change was made to resolve the task definition revision before authorization. When a task definition revision is not specified, authorization will occur using the latest revision of a task definition.</p>
  *          </note>
  *          <note>
  *             <p>Amazon Elastic Inference (EI) is no longer available to customers.</p>
  *          </note>
- *          <p>Alternatively, you can use<code>RunTask</code> to place tasks for you. For more
- * 			information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/scheduling_tasks.html">Scheduling Tasks</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
- *          <p>You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or
- * 			updating a service. For more infomation, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS volumes</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ *          <p>Alternatively, you can use<code>RunTask</code> to place tasks for you. For more information, see
+ * 				<a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/scheduling_tasks.html">Scheduling
+ * 				Tasks</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ *          <p>You can attach Amazon EBS volumes to Amazon ECS tasks by configuring the volume when creating or updating a
+ * 			service. For more infomation, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ebs-volumes.html#ebs-volume-types">Amazon EBS
+ * 				volumes</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -331,17 +333,16 @@ declare const StartTaskCommand_base: {
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or
+ * 			resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
+ * 			be specifying an identifier that isn't valid.</p>
  *          <p>The following list includes additional causes for the error:</p>
  *          <ul>
  *             <li>
- *                <p>The <code>RunTask</code> could not be processed because you use managed
- * 					scaling and there is a capacity error because the quota of tasks in the
- * 					<code>PROVISIONING</code> per cluster has been reached. For information
- * 					about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
- * 						service quotas</a>.</p>
+ *                <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
+ * 					a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
+ * 					been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
+ * 						quotas</a>.</p>
  *             </li>
  *          </ul>
  *
@@ -349,8 +350,7 @@ declare const StartTaskCommand_base: {
  *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/dist-types/commands/StopTaskCommand.d.ts CHANGED Viewed

@@ -28,20 +28,18 @@ declare const StopTaskCommand_base: {
 };
 /**
  * <p>Stops a running task. Any tags associated with the task will be deleted.</p>
- *          <p>When you call <code>StopTask</code> on a task, the equivalent of <code>docker
- * 				stop</code> is issued to the containers running in the task. This results in a
- * 				<code>SIGTERM</code> value and a default 30-second timeout, after which the
- * 				<code>SIGKILL</code> value is sent and the containers are forcibly stopped. If the
- * 			container handles the <code>SIGTERM</code> value gracefully and exits within 30 seconds
+ *          <p>When you call <code>StopTask</code> on a task, the equivalent of <code>docker stop</code> is issued
+ * 			to the containers running in the task. This results in a <code>SIGTERM</code> value and a default
+ * 			30-second timeout, after which the <code>SIGKILL</code> value is sent and the containers are forcibly
+ * 			stopped. If the container handles the <code>SIGTERM</code> value gracefully and exits within 30 seconds
  * 			from receiving it, no <code>SIGKILL</code> value is sent.</p>
- *          <p>For Windows containers, POSIX signals do not work and runtime stops the container by
- * 			sending a <code>CTRL_SHUTDOWN_EVENT</code>. For more information, see <a href="https://github.com/moby/moby/issues/25982">Unable to react to graceful shutdown
- * 				of (Windows) container #25982</a> on GitHub.</p>
+ *          <p>For Windows containers, POSIX signals do not work and runtime stops the container by sending a
+ * 				<code>CTRL_SHUTDOWN_EVENT</code>. For more information, see <a href="https://github.com/moby/moby/issues/25982">Unable to react to graceful shutdown of (Windows)
+ * 				container #25982</a> on GitHub.</p>
  *          <note>
- *             <p>The default 30-second timeout can be configured on the Amazon ECS container agent with
- * 				the <code>ECS_CONTAINER_STOP_TIMEOUT</code> variable. For more information, see
- * 					<a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-config.html">Amazon ECS Container Agent Configuration</a> in the
- * 				<i>Amazon Elastic Container Service Developer Guide</i>.</p>
+ *             <p>The default 30-second timeout can be configured on the Amazon ECS container agent with the
+ * 					<code>ECS_CONTAINER_STOP_TIMEOUT</code> variable. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-config.html">Amazon ECS
+ * 					Container Agent Configuration</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
  *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
@@ -228,17 +226,16 @@ declare const StopTaskCommand_base: {
  * @see {@link ECSClientResolvedConfig | config} for ECSClient's `config` shape.
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or
+ * 			resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
+ * 			be specifying an identifier that isn't valid.</p>
  *          <p>The following list includes additional causes for the error:</p>
  *          <ul>
  *             <li>
- *                <p>The <code>RunTask</code> could not be processed because you use managed
- * 					scaling and there is a capacity error because the quota of tasks in the
- * 					<code>PROVISIONING</code> per cluster has been reached. For information
- * 					about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
- * 						service quotas</a>.</p>
+ *                <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
+ * 					a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
+ * 					been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
+ * 						quotas</a>.</p>
  *             </li>
  *          </ul>
  *
@@ -246,8 +243,7 @@ declare const StopTaskCommand_base: {
  *  <p>The specified cluster wasn't found. You can view your available clusters with <a href="https://docs.aws.amazon.com/AmazonECS/latest/APIReference/API_ListClusters.html">ListClusters</a>. Amazon ECS clusters are Region specific.</p>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/dist-types/commands/SubmitAttachmentStateChangesCommand.d.ts CHANGED Viewed

@@ -64,23 +64,21 @@ declare const SubmitAttachmentStateChangesCommand_base: {
  *  <p>You don't have authorization to perform the requested action.</p>
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or
+ * 			resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
+ * 			be specifying an identifier that isn't valid.</p>
  *          <p>The following list includes additional causes for the error:</p>
  *          <ul>
  *             <li>
- *                <p>The <code>RunTask</code> could not be processed because you use managed
- * 					scaling and there is a capacity error because the quota of tasks in the
- * 					<code>PROVISIONING</code> per cluster has been reached. For information
- * 					about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
- * 						service quotas</a>.</p>
+ *                <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
+ * 					a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
+ * 					been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
+ * 						quotas</a>.</p>
  *             </li>
  *          </ul>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>

package/dist-types/commands/SubmitContainerStateChangeCommand.d.ts CHANGED Viewed

@@ -74,17 +74,16 @@ declare const SubmitContainerStateChangeCommand_base: {
  *  <p>You don't have authorization to perform the requested action.</p>
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or
+ * 			resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
+ * 			be specifying an identifier that isn't valid.</p>
  *          <p>The following list includes additional causes for the error:</p>
  *          <ul>
  *             <li>
- *                <p>The <code>RunTask</code> could not be processed because you use managed
- * 					scaling and there is a capacity error because the quota of tasks in the
- * 					<code>PROVISIONING</code> per cluster has been reached. For information
- * 					about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
- * 						service quotas</a>.</p>
+ *                <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
+ * 					a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
+ * 					been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
+ * 						quotas</a>.</p>
  *             </li>
  *          </ul>
  *

package/dist-types/commands/SubmitTaskStateChangeCommand.d.ts CHANGED Viewed

@@ -98,23 +98,21 @@ declare const SubmitTaskStateChangeCommand_base: {
  *  <p>You don't have authorization to perform the requested action.</p>
  *
  * @throws {@link ClientException} (client fault)
- *  <p>These errors are usually caused by a client action. This client action might be using
- * 			an action or resource on behalf of a user that doesn't have permissions to use the
- * 			action or resource. Or, it might be specifying an identifier that isn't valid.</p>
+ *  <p>These errors are usually caused by a client action. This client action might be using an action or
+ * 			resource on behalf of a user that doesn't have permissions to use the action or resource. Or, it might
+ * 			be specifying an identifier that isn't valid.</p>
  *          <p>The following list includes additional causes for the error:</p>
  *          <ul>
  *             <li>
- *                <p>The <code>RunTask</code> could not be processed because you use managed
- * 					scaling and there is a capacity error because the quota of tasks in the
- * 					<code>PROVISIONING</code> per cluster has been reached. For information
- * 					about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS
- * 						service quotas</a>.</p>
+ *                <p>The <code>RunTask</code> could not be processed because you use managed scaling and there is
+ * 					a capacity error because the quota of tasks in the <code>PROVISIONING</code> per cluster has
+ * 					been reached. For information about the service quotas, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/service-quotas.html">Amazon ECS service
+ * 						quotas</a>.</p>
  *             </li>
  *          </ul>
  *
  * @throws {@link InvalidParameterException} (client fault)
- *  <p>The specified parameter isn't valid. Review the available parameters for the API
- * 			request.</p>
+ *  <p>The specified parameter isn't valid. Review the available parameters for the API request.</p>
  *
  * @throws {@link ServerException} (server fault)
  *  <p>These errors are usually caused by a server issue.</p>