@aws-sdk/client-ecs 3.36.0 → 3.39.0

package/dist-cjs/commands/DeregisterContainerInstanceCommand.js

@@ -5,47 +5,11 @@ const middleware_serde_1 = require("@aws-sdk/middleware-serde");
 const smithy_client_1 = require("@aws-sdk/smithy-client");
 const models_0_1 = require("../models/models_0");
 const Aws_json1_1_1 = require("../protocols/Aws_json1_1");
-/**
- * <p>Deregisters an Amazon ECS container instance from the specified cluster. This instance is
- * 			no longer available to run tasks.</p>
- * 		       <p>If you intend to use the container instance for some other purpose after
- * 			deregistration, you should stop all of the tasks running on the container instance
- * 			before deregistration. That prevents any orphaned tasks from consuming resources.</p>
- * 		       <p>Deregistering a container instance removes the instance from a cluster, but it does
- * 			not terminate the EC2 instance. If you are finished using the instance, be sure to
- * 			terminate it in the Amazon EC2 console to stop billing.</p>
- * 		       <note>
- * 			         <p>If you terminate a running container instance, Amazon ECS automatically deregisters the
- * 				instance from your cluster (stopped container instances or instances with
- * 				disconnected agents are not automatically deregistered when terminated).</p>
- * 		       </note>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { ECSClient, DeregisterContainerInstanceCommand } from "@aws-sdk/client-ecs"; // ES Modules import
- * // const { ECSClient, DeregisterContainerInstanceCommand } = require("@aws-sdk/client-ecs"); // CommonJS import
- * const client = new ECSClient(config);
- * const command = new DeregisterContainerInstanceCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link DeregisterContainerInstanceCommandInput} for command's `input` shape.
- * @see {@link DeregisterContainerInstanceCommandOutput} for command's `response` shape.
- * @see {@link ECSClientResolvedConfig | config} for command's `input` shape.
- *
- */
 class DeregisterContainerInstanceCommand extends smithy_client_1.Command {
-    // Start section: command_properties
-    // End section: command_properties
     constructor(input) {
-        // Start section: command_constructor
         super();
         this.input = input;
-        // End section: command_constructor
     }
-    /**
-     * @internal
-     */
     resolveMiddleware(clientStack, configuration, options) {
         this.middlewareStack.use(middleware_serde_1.getSerdePlugin(configuration, this.serialize, this.deserialize));
         const stack = clientStack.concat(this.middlewareStack);

package/dist-cjs/commands/DeregisterTaskDefinitionCommand.js

@@ -5,50 +5,11 @@ const middleware_serde_1 = require("@aws-sdk/middleware-serde");
 const smithy_client_1 = require("@aws-sdk/smithy-client");
 const models_0_1 = require("../models/models_0");
 const Aws_json1_1_1 = require("../protocols/Aws_json1_1");
-/**
- * <p>Deregisters the specified task definition by family and revision. Upon deregistration,
- * 			the task definition is marked as <code>INACTIVE</code>. Existing tasks and services that
- * 			reference an <code>INACTIVE</code> task definition continue to run without disruption.
- * 			Existing services that reference an <code>INACTIVE</code> task definition can still
- * 			scale up or down by modifying the service's desired count.</p>
- * 		       <p>You cannot use an <code>INACTIVE</code> task definition to run new tasks or create new
- * 			services, and you cannot update an existing service to reference an
- * 				<code>INACTIVE</code> task definition. However, there may be up to a 10-minute
- * 			window following deregistration where these restrictions have not yet taken
- * 			effect.</p>
- * 		       <note>
- * 			         <p>At this time, <code>INACTIVE</code> task definitions remain discoverable in your
- * 				account indefinitely. However, this behavior is subject to change in the future, so
- * 				you should not rely on <code>INACTIVE</code> task definitions persisting beyond the
- * 				lifecycle of any associated tasks and services.</p>
- * 		       </note>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { ECSClient, DeregisterTaskDefinitionCommand } from "@aws-sdk/client-ecs"; // ES Modules import
- * // const { ECSClient, DeregisterTaskDefinitionCommand } = require("@aws-sdk/client-ecs"); // CommonJS import
- * const client = new ECSClient(config);
- * const command = new DeregisterTaskDefinitionCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link DeregisterTaskDefinitionCommandInput} for command's `input` shape.
- * @see {@link DeregisterTaskDefinitionCommandOutput} for command's `response` shape.
- * @see {@link ECSClientResolvedConfig | config} for command's `input` shape.
- *
- */
 class DeregisterTaskDefinitionCommand extends smithy_client_1.Command {
-    // Start section: command_properties
-    // End section: command_properties
     constructor(input) {
-        // Start section: command_constructor
         super();
         this.input = input;
-        // End section: command_constructor
     }
-    /**
-     * @internal
-     */
     resolveMiddleware(clientStack, configuration, options) {
         this.middlewareStack.use(middleware_serde_1.getSerdePlugin(configuration, this.serialize, this.deserialize));
         const stack = clientStack.concat(this.middlewareStack);

package/dist-cjs/commands/DescribeCapacityProvidersCommand.js

@@ -5,35 +5,11 @@ const middleware_serde_1 = require("@aws-sdk/middleware-serde");
 const smithy_client_1 = require("@aws-sdk/smithy-client");
 const models_0_1 = require("../models/models_0");
 const Aws_json1_1_1 = require("../protocols/Aws_json1_1");
-/**
- * <p>Describes one or more of your capacity providers.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { ECSClient, DescribeCapacityProvidersCommand } from "@aws-sdk/client-ecs"; // ES Modules import
- * // const { ECSClient, DescribeCapacityProvidersCommand } = require("@aws-sdk/client-ecs"); // CommonJS import
- * const client = new ECSClient(config);
- * const command = new DescribeCapacityProvidersCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link DescribeCapacityProvidersCommandInput} for command's `input` shape.
- * @see {@link DescribeCapacityProvidersCommandOutput} for command's `response` shape.
- * @see {@link ECSClientResolvedConfig | config} for command's `input` shape.
- *
- */
 class DescribeCapacityProvidersCommand extends smithy_client_1.Command {
-    // Start section: command_properties
-    // End section: command_properties
     constructor(input) {
-        // Start section: command_constructor
         super();
         this.input = input;
-        // End section: command_constructor
     }
-    /**
-     * @internal
-     */
     resolveMiddleware(clientStack, configuration, options) {
         this.middlewareStack.use(middleware_serde_1.getSerdePlugin(configuration, this.serialize, this.deserialize));
         const stack = clientStack.concat(this.middlewareStack);

package/dist-cjs/commands/DescribeClustersCommand.js

@@ -5,35 +5,11 @@ const middleware_serde_1 = require("@aws-sdk/middleware-serde");
 const smithy_client_1 = require("@aws-sdk/smithy-client");
 const models_0_1 = require("../models/models_0");
 const Aws_json1_1_1 = require("../protocols/Aws_json1_1");
-/**
- * <p>Describes one or more of your clusters.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { ECSClient, DescribeClustersCommand } from "@aws-sdk/client-ecs"; // ES Modules import
- * // const { ECSClient, DescribeClustersCommand } = require("@aws-sdk/client-ecs"); // CommonJS import
- * const client = new ECSClient(config);
- * const command = new DescribeClustersCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link DescribeClustersCommandInput} for command's `input` shape.
- * @see {@link DescribeClustersCommandOutput} for command's `response` shape.
- * @see {@link ECSClientResolvedConfig | config} for command's `input` shape.
- *
- */
 class DescribeClustersCommand extends smithy_client_1.Command {
-    // Start section: command_properties
-    // End section: command_properties
     constructor(input) {
-        // Start section: command_constructor
         super();
         this.input = input;
-        // End section: command_constructor
     }
-    /**
-     * @internal
-     */
     resolveMiddleware(clientStack, configuration, options) {
         this.middlewareStack.use(middleware_serde_1.getSerdePlugin(configuration, this.serialize, this.deserialize));
         const stack = clientStack.concat(this.middlewareStack);

package/dist-cjs/commands/DescribeContainerInstancesCommand.js

@@ -5,36 +5,11 @@ const middleware_serde_1 = require("@aws-sdk/middleware-serde");
 const smithy_client_1 = require("@aws-sdk/smithy-client");
 const models_0_1 = require("../models/models_0");
 const Aws_json1_1_1 = require("../protocols/Aws_json1_1");
-/**
- * <p>Describes one or more container instances. Returns metadata about each container
- * 			instance requested.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { ECSClient, DescribeContainerInstancesCommand } from "@aws-sdk/client-ecs"; // ES Modules import
- * // const { ECSClient, DescribeContainerInstancesCommand } = require("@aws-sdk/client-ecs"); // CommonJS import
- * const client = new ECSClient(config);
- * const command = new DescribeContainerInstancesCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link DescribeContainerInstancesCommandInput} for command's `input` shape.
- * @see {@link DescribeContainerInstancesCommandOutput} for command's `response` shape.
- * @see {@link ECSClientResolvedConfig | config} for command's `input` shape.
- *
- */
 class DescribeContainerInstancesCommand extends smithy_client_1.Command {
-    // Start section: command_properties
-    // End section: command_properties
     constructor(input) {
-        // Start section: command_constructor
         super();
         this.input = input;
-        // End section: command_constructor
     }
-    /**
-     * @internal
-     */
     resolveMiddleware(clientStack, configuration, options) {
         this.middlewareStack.use(middleware_serde_1.getSerdePlugin(configuration, this.serialize, this.deserialize));
         const stack = clientStack.concat(this.middlewareStack);

package/dist-cjs/commands/DescribeServicesCommand.js

@@ -5,35 +5,11 @@ const middleware_serde_1 = require("@aws-sdk/middleware-serde");
 const smithy_client_1 = require("@aws-sdk/smithy-client");
 const models_0_1 = require("../models/models_0");
 const Aws_json1_1_1 = require("../protocols/Aws_json1_1");
-/**
- * <p>Describes the specified services running in your cluster.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { ECSClient, DescribeServicesCommand } from "@aws-sdk/client-ecs"; // ES Modules import
- * // const { ECSClient, DescribeServicesCommand } = require("@aws-sdk/client-ecs"); // CommonJS import
- * const client = new ECSClient(config);
- * const command = new DescribeServicesCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link DescribeServicesCommandInput} for command's `input` shape.
- * @see {@link DescribeServicesCommandOutput} for command's `response` shape.
- * @see {@link ECSClientResolvedConfig | config} for command's `input` shape.
- *
- */
 class DescribeServicesCommand extends smithy_client_1.Command {
-    // Start section: command_properties
-    // End section: command_properties
     constructor(input) {
-        // Start section: command_constructor
         super();
         this.input = input;
-        // End section: command_constructor
     }
-    /**
-     * @internal
-     */
     resolveMiddleware(clientStack, configuration, options) {
         this.middlewareStack.use(middleware_serde_1.getSerdePlugin(configuration, this.serialize, this.deserialize));
         const stack = clientStack.concat(this.middlewareStack);

package/dist-cjs/commands/DescribeTaskDefinitionCommand.js

@@ -5,42 +5,11 @@ const middleware_serde_1 = require("@aws-sdk/middleware-serde");
 const smithy_client_1 = require("@aws-sdk/smithy-client");
 const models_0_1 = require("../models/models_0");
 const Aws_json1_1_1 = require("../protocols/Aws_json1_1");
-/**
- * <p>Describes a task definition. You can specify a <code>family</code> and
- * 				<code>revision</code> to find information about a specific task definition, or you
- * 			can simply specify the family to find the latest <code>ACTIVE</code> revision in that
- * 			family.</p>
- * 		       <note>
- * 			         <p>You can only describe <code>INACTIVE</code> task definitions while an active task
- * 				or service references them.</p>
- * 		       </note>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { ECSClient, DescribeTaskDefinitionCommand } from "@aws-sdk/client-ecs"; // ES Modules import
- * // const { ECSClient, DescribeTaskDefinitionCommand } = require("@aws-sdk/client-ecs"); // CommonJS import
- * const client = new ECSClient(config);
- * const command = new DescribeTaskDefinitionCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link DescribeTaskDefinitionCommandInput} for command's `input` shape.
- * @see {@link DescribeTaskDefinitionCommandOutput} for command's `response` shape.
- * @see {@link ECSClientResolvedConfig | config} for command's `input` shape.
- *
- */
 class DescribeTaskDefinitionCommand extends smithy_client_1.Command {
-    // Start section: command_properties
-    // End section: command_properties
     constructor(input) {
-        // Start section: command_constructor
         super();
         this.input = input;
-        // End section: command_constructor
     }
-    /**
-     * @internal
-     */
     resolveMiddleware(clientStack, configuration, options) {
         this.middlewareStack.use(middleware_serde_1.getSerdePlugin(configuration, this.serialize, this.deserialize));
         const stack = clientStack.concat(this.middlewareStack);

package/dist-cjs/commands/DescribeTaskSetsCommand.js

@@ -5,38 +5,11 @@ const middleware_serde_1 = require("@aws-sdk/middleware-serde");
 const smithy_client_1 = require("@aws-sdk/smithy-client");
 const models_0_1 = require("../models/models_0");
 const Aws_json1_1_1 = require("../protocols/Aws_json1_1");
-/**
- * <p>Describes the task sets in the specified cluster and service. This is used when a
- * 			service uses the <code>EXTERNAL</code> deployment controller type. For more information,
- * 			see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/deployment-types.html">Amazon ECS Deployment
- * 				Types</a> in the <i>Amazon Elastic Container Service Developer Guide</i>.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { ECSClient, DescribeTaskSetsCommand } from "@aws-sdk/client-ecs"; // ES Modules import
- * // const { ECSClient, DescribeTaskSetsCommand } = require("@aws-sdk/client-ecs"); // CommonJS import
- * const client = new ECSClient(config);
- * const command = new DescribeTaskSetsCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link DescribeTaskSetsCommandInput} for command's `input` shape.
- * @see {@link DescribeTaskSetsCommandOutput} for command's `response` shape.
- * @see {@link ECSClientResolvedConfig | config} for command's `input` shape.
- *
- */
 class DescribeTaskSetsCommand extends smithy_client_1.Command {
-    // Start section: command_properties
-    // End section: command_properties
     constructor(input) {
-        // Start section: command_constructor
         super();
         this.input = input;
-        // End section: command_constructor
     }
-    /**
-     * @internal
-     */
     resolveMiddleware(clientStack, configuration, options) {
         this.middlewareStack.use(middleware_serde_1.getSerdePlugin(configuration, this.serialize, this.deserialize));
         const stack = clientStack.concat(this.middlewareStack);

package/dist-cjs/commands/DescribeTasksCommand.js

@@ -5,35 +5,11 @@ const middleware_serde_1 = require("@aws-sdk/middleware-serde");
 const smithy_client_1 = require("@aws-sdk/smithy-client");
 const models_0_1 = require("../models/models_0");
 const Aws_json1_1_1 = require("../protocols/Aws_json1_1");
-/**
- * <p>Describes a specified task or tasks.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { ECSClient, DescribeTasksCommand } from "@aws-sdk/client-ecs"; // ES Modules import
- * // const { ECSClient, DescribeTasksCommand } = require("@aws-sdk/client-ecs"); // CommonJS import
- * const client = new ECSClient(config);
- * const command = new DescribeTasksCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link DescribeTasksCommandInput} for command's `input` shape.
- * @see {@link DescribeTasksCommandOutput} for command's `response` shape.
- * @see {@link ECSClientResolvedConfig | config} for command's `input` shape.
- *
- */
 class DescribeTasksCommand extends smithy_client_1.Command {
-    // Start section: command_properties
-    // End section: command_properties
     constructor(input) {
-        // Start section: command_constructor
         super();
         this.input = input;
-        // End section: command_constructor
     }
-    /**
-     * @internal
-     */
     resolveMiddleware(clientStack, configuration, options) {
         this.middlewareStack.use(middleware_serde_1.getSerdePlugin(configuration, this.serialize, this.deserialize));
         const stack = clientStack.concat(this.middlewareStack);

package/dist-cjs/commands/DiscoverPollEndpointCommand.js

@@ -5,39 +5,11 @@ const middleware_serde_1 = require("@aws-sdk/middleware-serde");
 const smithy_client_1 = require("@aws-sdk/smithy-client");
 const models_0_1 = require("../models/models_0");
 const Aws_json1_1_1 = require("../protocols/Aws_json1_1");
-/**
- * <note>
- *             <p>This action is only used by the Amazon ECS agent, and it is not intended for use outside of the agent.</p>
- *          </note>
- *          <p>Returns an endpoint for
- * 			the Amazon ECS agent to poll for updates.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { ECSClient, DiscoverPollEndpointCommand } from "@aws-sdk/client-ecs"; // ES Modules import
- * // const { ECSClient, DiscoverPollEndpointCommand } = require("@aws-sdk/client-ecs"); // CommonJS import
- * const client = new ECSClient(config);
- * const command = new DiscoverPollEndpointCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link DiscoverPollEndpointCommandInput} for command's `input` shape.
- * @see {@link DiscoverPollEndpointCommandOutput} for command's `response` shape.
- * @see {@link ECSClientResolvedConfig | config} for command's `input` shape.
- *
- */
 class DiscoverPollEndpointCommand extends smithy_client_1.Command {
-    // Start section: command_properties
-    // End section: command_properties
     constructor(input) {
-        // Start section: command_constructor
         super();
         this.input = input;
-        // End section: command_constructor
     }
-    /**
-     * @internal
-     */
     resolveMiddleware(clientStack, configuration, options) {
         this.middlewareStack.use(middleware_serde_1.getSerdePlugin(configuration, this.serialize, this.deserialize));
         const stack = clientStack.concat(this.middlewareStack);

package/dist-cjs/commands/ExecuteCommandCommand.js

@@ -5,35 +5,11 @@ const middleware_serde_1 = require("@aws-sdk/middleware-serde");
 const smithy_client_1 = require("@aws-sdk/smithy-client");
 const models_0_1 = require("../models/models_0");
 const Aws_json1_1_1 = require("../protocols/Aws_json1_1");
-/**
- * <p>Runs a command remotely on a container within a task.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { ECSClient, ExecuteCommandCommand } from "@aws-sdk/client-ecs"; // ES Modules import
- * // const { ECSClient, ExecuteCommandCommand } = require("@aws-sdk/client-ecs"); // CommonJS import
- * const client = new ECSClient(config);
- * const command = new ExecuteCommandCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link ExecuteCommandCommandInput} for command's `input` shape.
- * @see {@link ExecuteCommandCommandOutput} for command's `response` shape.
- * @see {@link ECSClientResolvedConfig | config} for command's `input` shape.
- *
- */
 class ExecuteCommandCommand extends smithy_client_1.Command {
-    // Start section: command_properties
-    // End section: command_properties
     constructor(input) {
-        // Start section: command_constructor
         super();
         this.input = input;
-        // End section: command_constructor
     }
-    /**
-     * @internal
-     */
     resolveMiddleware(clientStack, configuration, options) {
         this.middlewareStack.use(middleware_serde_1.getSerdePlugin(configuration, this.serialize, this.deserialize));
         const stack = clientStack.concat(this.middlewareStack);

package/dist-cjs/commands/ListAccountSettingsCommand.js

@@ -5,35 +5,11 @@ const middleware_serde_1 = require("@aws-sdk/middleware-serde");
 const smithy_client_1 = require("@aws-sdk/smithy-client");
 const models_0_1 = require("../models/models_0");
 const Aws_json1_1_1 = require("../protocols/Aws_json1_1");
-/**
- * <p>Lists the account settings for a specified principal.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { ECSClient, ListAccountSettingsCommand } from "@aws-sdk/client-ecs"; // ES Modules import
- * // const { ECSClient, ListAccountSettingsCommand } = require("@aws-sdk/client-ecs"); // CommonJS import
- * const client = new ECSClient(config);
- * const command = new ListAccountSettingsCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link ListAccountSettingsCommandInput} for command's `input` shape.
- * @see {@link ListAccountSettingsCommandOutput} for command's `response` shape.
- * @see {@link ECSClientResolvedConfig | config} for command's `input` shape.
- *
- */
 class ListAccountSettingsCommand extends smithy_client_1.Command {
-    // Start section: command_properties
-    // End section: command_properties
     constructor(input) {
-        // Start section: command_constructor
         super();
         this.input = input;
-        // End section: command_constructor
     }
-    /**
-     * @internal
-     */
     resolveMiddleware(clientStack, configuration, options) {
         this.middlewareStack.use(middleware_serde_1.getSerdePlugin(configuration, this.serialize, this.deserialize));
         const stack = clientStack.concat(this.middlewareStack);

package/dist-cjs/commands/ListAttributesCommand.js

@@ -5,41 +5,11 @@ const middleware_serde_1 = require("@aws-sdk/middleware-serde");
 const smithy_client_1 = require("@aws-sdk/smithy-client");
 const models_0_1 = require("../models/models_0");
 const Aws_json1_1_1 = require("../protocols/Aws_json1_1");
-/**
- * <p>Lists the attributes for Amazon ECS resources within a specified target type and cluster.
- * 			When you specify a target type and cluster, <code>ListAttributes</code> returns a list
- * 			of attribute objects, one for each attribute on each resource. You can filter the list
- * 			of results to a single attribute name to only return results that have that name. You
- * 			can also filter the results by attribute name and value, for example, to see which
- * 			container instances in a cluster are running a Linux AMI
- * 			(<code>ecs.os-type=linux</code>). </p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { ECSClient, ListAttributesCommand } from "@aws-sdk/client-ecs"; // ES Modules import
- * // const { ECSClient, ListAttributesCommand } = require("@aws-sdk/client-ecs"); // CommonJS import
- * const client = new ECSClient(config);
- * const command = new ListAttributesCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link ListAttributesCommandInput} for command's `input` shape.
- * @see {@link ListAttributesCommandOutput} for command's `response` shape.
- * @see {@link ECSClientResolvedConfig | config} for command's `input` shape.
- *
- */
 class ListAttributesCommand extends smithy_client_1.Command {
-    // Start section: command_properties
-    // End section: command_properties
     constructor(input) {
-        // Start section: command_constructor
         super();
         this.input = input;
-        // End section: command_constructor
     }
-    /**
-     * @internal
-     */
     resolveMiddleware(clientStack, configuration, options) {
         this.middlewareStack.use(middleware_serde_1.getSerdePlugin(configuration, this.serialize, this.deserialize));
         const stack = clientStack.concat(this.middlewareStack);

package/dist-cjs/commands/ListClustersCommand.js

@@ -5,35 +5,11 @@ const middleware_serde_1 = require("@aws-sdk/middleware-serde");
 const smithy_client_1 = require("@aws-sdk/smithy-client");
 const models_0_1 = require("../models/models_0");
 const Aws_json1_1_1 = require("../protocols/Aws_json1_1");
-/**
- * <p>Returns a list of existing clusters.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { ECSClient, ListClustersCommand } from "@aws-sdk/client-ecs"; // ES Modules import
- * // const { ECSClient, ListClustersCommand } = require("@aws-sdk/client-ecs"); // CommonJS import
- * const client = new ECSClient(config);
- * const command = new ListClustersCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link ListClustersCommandInput} for command's `input` shape.
- * @see {@link ListClustersCommandOutput} for command's `response` shape.
- * @see {@link ECSClientResolvedConfig | config} for command's `input` shape.
- *
- */
 class ListClustersCommand extends smithy_client_1.Command {
-    // Start section: command_properties
-    // End section: command_properties
     constructor(input) {
-        // Start section: command_constructor
         super();
         this.input = input;
-        // End section: command_constructor
     }
-    /**
-     * @internal
-     */
     resolveMiddleware(clientStack, configuration, options) {
         this.middlewareStack.use(middleware_serde_1.getSerdePlugin(configuration, this.serialize, this.deserialize));
         const stack = clientStack.concat(this.middlewareStack);

package/dist-cjs/commands/ListContainerInstancesCommand.js

@@ -5,38 +5,11 @@ const middleware_serde_1 = require("@aws-sdk/middleware-serde");
 const smithy_client_1 = require("@aws-sdk/smithy-client");
 const models_0_1 = require("../models/models_0");
 const Aws_json1_1_1 = require("../protocols/Aws_json1_1");
-/**
- * <p>Returns a list of container instances in a specified cluster. You can filter the
- * 			results of a <code>ListContainerInstances</code> operation with cluster query language
- * 			statements inside the <code>filter</code> parameter. For more information, see <a href="https://docs.aws.amazon.com/AmazonECS/latest/developerguide/cluster-query-language.html">Cluster Query Language</a> in the
- * 				<i>Amazon Elastic Container Service Developer Guide</i>.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { ECSClient, ListContainerInstancesCommand } from "@aws-sdk/client-ecs"; // ES Modules import
- * // const { ECSClient, ListContainerInstancesCommand } = require("@aws-sdk/client-ecs"); // CommonJS import
- * const client = new ECSClient(config);
- * const command = new ListContainerInstancesCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link ListContainerInstancesCommandInput} for command's `input` shape.
- * @see {@link ListContainerInstancesCommandOutput} for command's `response` shape.
- * @see {@link ECSClientResolvedConfig | config} for command's `input` shape.
- *
- */
 class ListContainerInstancesCommand extends smithy_client_1.Command {
-    // Start section: command_properties
-    // End section: command_properties
     constructor(input) {
-        // Start section: command_constructor
         super();
         this.input = input;
-        // End section: command_constructor
     }
-    /**
-     * @internal
-     */
     resolveMiddleware(clientStack, configuration, options) {
         this.middlewareStack.use(middleware_serde_1.getSerdePlugin(configuration, this.serialize, this.deserialize));
         const stack = clientStack.concat(this.middlewareStack);

package/dist-cjs/commands/ListServicesCommand.js

@@ -5,36 +5,11 @@ const middleware_serde_1 = require("@aws-sdk/middleware-serde");
 const smithy_client_1 = require("@aws-sdk/smithy-client");
 const models_0_1 = require("../models/models_0");
 const Aws_json1_1_1 = require("../protocols/Aws_json1_1");
-/**
- * <p>Returns a list of services. You can filter the results by cluster, launch type, and
- * 			scheduling strategy.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { ECSClient, ListServicesCommand } from "@aws-sdk/client-ecs"; // ES Modules import
- * // const { ECSClient, ListServicesCommand } = require("@aws-sdk/client-ecs"); // CommonJS import
- * const client = new ECSClient(config);
- * const command = new ListServicesCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link ListServicesCommandInput} for command's `input` shape.
- * @see {@link ListServicesCommandOutput} for command's `response` shape.
- * @see {@link ECSClientResolvedConfig | config} for command's `input` shape.
- *
- */
 class ListServicesCommand extends smithy_client_1.Command {
-    // Start section: command_properties
-    // End section: command_properties
     constructor(input) {
-        // Start section: command_constructor
         super();
         this.input = input;
-        // End section: command_constructor
     }
-    /**
-     * @internal
-     */
     resolveMiddleware(clientStack, configuration, options) {
         this.middlewareStack.use(middleware_serde_1.getSerdePlugin(configuration, this.serialize, this.deserialize));
         const stack = clientStack.concat(this.middlewareStack);