@aws-sdk/client-ec2 3.782.0 → 3.783.0

package/dist-types/commands/AssociateRouteServerCommand.d.ts

@@ -28,8 +28,8 @@ declare const AssociateRouteServerCommand_base: {
 };
 /**
  * <p>Associates a route server with a VPC to enable dynamic route updates.</p>
- *          <p>A route server association is the connection established between a route server and a VPC. This is a fundamental configuration step that enables the route server to work with appliances in your VPC.</p>
- *          <p>For more information see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
+ *          <p>A route server association is the connection established between a route server and a VPC.</p>
+ *          <p>For more information see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/dynamic-routing-route-server.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/CreateRestoreImageTaskCommand.d.ts

@@ -30,9 +30,9 @@ declare const CreateRestoreImageTaskCommand_base: {
  * <p>Starts a task that restores an AMI from an Amazon S3 object that was previously created by
  *       using <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateStoreImageTask.html">CreateStoreImageTask</a>.</p>
  *          <p>To use this API, you must have the required permissions. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ami-store-restore.html#ami-s3-permissions">Permissions for storing and restoring AMIs using Amazon S3</a> in the
- *         <i>Amazon EC2 User Guide</i>.</p>
+ *       <i>Amazon EC2 User Guide</i>.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ami-store-restore.html">Store and restore an AMI using
- *         Amazon S3</a> in the <i>Amazon EC2 User Guide</i>.</p>
+ *       Amazon S3</a> in the <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/CreateRouteServerCommand.d.ts

@@ -28,11 +28,12 @@ declare const CreateRouteServerCommand_base: {
 };
 /**
  * <p>Creates a new route server to manage dynamic routing in a VPC.</p>
- *          <p>Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature, VPC Route Server dynamically updates VPC and gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.</p>
+ *          <p>Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature,
+ * VPC Route Server dynamically updates VPC and internet gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.</p>
  *          <p>Route server supports the follow route table types:</p>
  *          <ul>
  *             <li>
- *                <p>VPC route tables</p>
+ *                <p>VPC route tables not associated with subnets</p>
  *             </li>
  *             <li>
  *                <p>Subnet route tables</p>
@@ -42,7 +43,7 @@ declare const CreateRouteServerCommand_base: {
  *             </li>
  *          </ul>
  *          <p>Route server does not support route tables associated with virtual private gateways. To propagate routes into a transit gateway route table, use <a href="https://docs.aws.amazon.com/vpc/latest/tgw/tgw-connect.html">Transit Gateway Connect</a>.</p>
- *          <p>For more information see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
+ *          <p>For more information see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/dynamic-routing-route-server.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/CreateRouteServerEndpointCommand.d.ts

@@ -28,7 +28,8 @@ declare const CreateRouteServerEndpointCommand_base: {
 };
 /**
  * <p>Creates a new endpoint for a route server in a specified subnet.</p>
- *          <p>A route server endpoint is an Amazon Web Services-managed component inside a subnet that facilitates BGP (Border Gateway Protocol) connections between your route server and your BGP peers. Create two endpoints per subnet for redundancy.</p>
+ *          <p>A route server endpoint is an Amazon Web Services-managed component inside a subnet that facilitates <a href="https://en.wikipedia.org/wiki/Border_Gateway_Protocol">BGP (Border Gateway Protocol)</a> connections between your route server and your BGP peers.</p>
+ *          <p>For more information see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/dynamic-routing-route-server.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/CreateRouteServerPeerCommand.d.ts

@@ -28,7 +28,7 @@ declare const CreateRouteServerPeerCommand_base: {
 };
 /**
  * <p>Creates a new BGP peer for a specified route server endpoint.</p>
- *          <p>A route server peer is a network appliance or function deployed in Amazon Web Services, such as firewall appliances and other network security functions, that meet these requirements:</p>
+ *          <p>A route server peer is a session between a route server endpoint and the device deployed in Amazon Web Services (such as a firewall appliance or other network security function running on an EC2 instance). The device must meet these requirements:</p>
  *          <ul>
  *             <li>
  *                <p>Have an elastic network interface in the VPC</p>
@@ -40,6 +40,7 @@ declare const CreateRouteServerPeerCommand_base: {
  *                <p>Can initiate BGP sessions</p>
  *             </li>
  *          </ul>
+ *          <p>For more information see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/dynamic-routing-route-server.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/CreateStoreImageTaskCommand.d.ts

@@ -29,9 +29,9 @@ declare const CreateStoreImageTaskCommand_base: {
 /**
  * <p>Stores an AMI as a single object in an Amazon S3 bucket.</p>
  *          <p>To use this API, you must have the required permissions. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ami-store-restore.html#ami-s3-permissions">Permissions for storing and restoring AMIs using Amazon S3</a> in the
- *         <i>Amazon EC2 User Guide</i>.</p>
+ *       <i>Amazon EC2 User Guide</i>.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ami-store-restore.html">Store and restore an AMI using
- *         Amazon S3</a> in the <i>Amazon EC2 User Guide</i>.</p>
+ *       Amazon S3</a> in the <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DeleteRouteServerCommand.d.ts

@@ -28,11 +28,12 @@ declare const DeleteRouteServerCommand_base: {
 };
 /**
  * <p>Deletes the specified route server.</p>
- *          <p>Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature, VPC Route Server dynamically updates VPC and gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.</p>
+ *          <p>Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature,
+ * VPC Route Server dynamically updates VPC and internet gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.</p>
  *          <p>Route server supports the follow route table types:</p>
  *          <ul>
  *             <li>
- *                <p>VPC route tables</p>
+ *                <p>VPC route tables not associated with subnets</p>
  *             </li>
  *             <li>
  *                <p>Subnet route tables</p>
@@ -42,7 +43,7 @@ declare const DeleteRouteServerCommand_base: {
  *             </li>
  *          </ul>
  *          <p>Route server does not support route tables associated with virtual private gateways. To propagate routes into a transit gateway route table, use <a href="https://docs.aws.amazon.com/vpc/latest/tgw/tgw-connect.html">Transit Gateway Connect</a>.</p>
- *          <p>For more information see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
+ *          <p>For more information see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/dynamic-routing-route-server.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DeleteRouteServerEndpointCommand.d.ts

@@ -28,7 +28,7 @@ declare const DeleteRouteServerEndpointCommand_base: {
 };
 /**
  * <p>Deletes the specified route server endpoint.</p>
- *          <p>A route server endpoint is an Amazon Web Services-managed component inside a subnet that facilitates BGP (Border Gateway Protocol) connections between your route server and your BGP peers. Create two endpoints per subnet for redundancy.</p>
+ *          <p>A route server endpoint is an Amazon Web Services-managed component inside a subnet that facilitates <a href="https://en.wikipedia.org/wiki/Border_Gateway_Protocol">BGP (Border Gateway Protocol)</a> connections between your route server and your BGP peers.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DeleteRouteServerPeerCommand.d.ts

@@ -28,7 +28,7 @@ declare const DeleteRouteServerPeerCommand_base: {
 };
 /**
  * <p>Deletes the specified BGP peer from a route server.</p>
- *          <p>A route server peer is a network appliance or function deployed in Amazon Web Services, such as firewall appliances and other network security functions, that meet these requirements:</p>
+ *          <p>A route server peer is a session between a route server endpoint and the device deployed in Amazon Web Services (such as a firewall appliance or other network security function running on an EC2 instance). The device must meet these requirements:</p>
  *          <ul>
  *             <li>
  *                <p>Have an elastic network interface in the VPC</p>

package/dist-types/commands/DeregisterImageCommand.d.ts

@@ -27,18 +27,30 @@ declare const DeregisterImageCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
- * <p>Deregisters the specified AMI. After you deregister an AMI, it can't be used to launch new
+ * <p>Deregisters the specified AMI. A deregistered AMI can't be used to launch new
  *       instances.</p>
- *          <p>If you deregister an AMI that matches a Recycle Bin retention rule, the AMI is retained in
- *       the Recycle Bin for the specified retention period. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/recycle-bin.html">Recycle Bin</a> in
- *       the <i>Amazon EC2 User Guide</i>.</p>
- *          <p>When you deregister an AMI, it doesn't affect any instances that you've already launched
- *       from the AMI. You'll continue to incur usage costs for those instances until you terminate
- *       them.</p>
- *          <p>When you deregister an Amazon EBS-backed AMI, it doesn't affect the snapshot that was created
- *       for the root volume of the instance during the AMI creation process. When you deregister an
- *       instance store-backed AMI, it doesn't affect the files that you uploaded to Amazon S3 when you
- *       created the AMI.</p>
+ *          <p>If a deregistered EBS-backed AMI matches a Recycle Bin retention rule, it moves to the
+ *       Recycle Bin for the specified retention period. It can be restored before its retention period
+ *       expires, after which it is permanently deleted. If the deregistered AMI doesn't match a
+ *       retention rule, it is permanently deleted immediately. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/recycle-bin.html">Recycle Bin</a> in
+ *       the <i>Amazon EBS User Guide</i>.</p>
+ *          <p>Deregistering an AMI does not delete the following:</p>
+ *          <ul>
+ *             <li>
+ *                <p>Instances already launched from the AMI. You'll continue to incur usage costs for the
+ *           instances until you terminate them.</p>
+ *             </li>
+ *             <li>
+ *                <p>For EBS-backed AMIs: The snapshots that were created of the root and data volumes of
+ *           the instance during AMI creation. You'll continue to incur snapshot storage costs.</p>
+ *             </li>
+ *             <li>
+ *                <p>For instance store-backed AMIs: The files uploaded to Amazon S3 during AMI creation. You'll
+ *           continue to incur S3 storage costs.</p>
+ *             </li>
+ *          </ul>
+ *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/deregister-ami.html">Deregister an Amazon EC2 AMI</a> in the
+ *         <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DescribeRouteServerEndpointsCommand.d.ts

@@ -28,8 +28,8 @@ declare const DescribeRouteServerEndpointsCommand_base: {
 };
 /**
  * <p>Describes one or more route server endpoints.</p>
- *          <p>A route server endpoint is an Amazon Web Services-managed component inside a subnet that facilitates BGP (Border Gateway Protocol) connections between your route server and your BGP peers. Create two endpoints per subnet for redundancy.</p>
- *          <p>For more information see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
+ *          <p>A route server endpoint is an Amazon Web Services-managed component inside a subnet that facilitates <a href="https://en.wikipedia.org/wiki/Border_Gateway_Protocol">BGP (Border Gateway Protocol)</a> connections between your route server and your BGP peers.</p>
+ *          <p>For more information see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/dynamic-routing-route-server.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DescribeRouteServerPeersCommand.d.ts

@@ -28,7 +28,7 @@ declare const DescribeRouteServerPeersCommand_base: {
 };
 /**
  * <p>Describes one or more route server peers.</p>
- *          <p>A route server peer is a network appliance or function deployed in Amazon Web Services, such as firewall appliances and other network security functions, that meet these requirements:</p>
+ *          <p>A route server peer is a session between a route server endpoint and the device deployed in Amazon Web Services (such as a firewall appliance or other network security function running on an EC2 instance). The device must meet these requirements:</p>
  *          <ul>
  *             <li>
  *                <p>Have an elastic network interface in the VPC</p>
@@ -40,7 +40,7 @@ declare const DescribeRouteServerPeersCommand_base: {
  *                <p>Can initiate BGP sessions</p>
  *             </li>
  *          </ul>
- *          <p>For more information see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
+ *          <p>For more information see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/dynamic-routing-route-server.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DescribeRouteServersCommand.d.ts

@@ -28,11 +28,12 @@ declare const DescribeRouteServersCommand_base: {
 };
 /**
  * <p>Describes one or more route servers.</p>
- *          <p>Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature, VPC Route Server dynamically updates VPC and gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.</p>
+ *          <p>Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature,
+ * VPC Route Server dynamically updates VPC and internet gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.</p>
  *          <p>Route server supports the follow route table types:</p>
  *          <ul>
  *             <li>
- *                <p>VPC route tables</p>
+ *                <p>VPC route tables not associated with subnets</p>
  *             </li>
  *             <li>
  *                <p>Subnet route tables</p>
@@ -42,7 +43,7 @@ declare const DescribeRouteServersCommand_base: {
  *             </li>
  *          </ul>
  *          <p>Route server does not support route tables associated with virtual private gateways. To propagate routes into a transit gateway route table, use <a href="https://docs.aws.amazon.com/vpc/latest/tgw/tgw-connect.html">Transit Gateway Connect</a>.</p>
- *          <p>For more information see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
+ *          <p>For more information see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/dynamic-routing-route-server.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DescribeStoreImageTasksCommand.d.ts

@@ -31,14 +31,14 @@ declare const DescribeStoreImageTasksCommand_base: {
  *       specified AMIs. If you don't specify the AMIs, you get a paginated list of store tasks from
  *       the last 31 days.</p>
  *          <p>For each AMI task, the response indicates if the task is <code>InProgress</code>,
- *         <code>Completed</code>, or <code>Failed</code>. For tasks <code>InProgress</code>, the
+ *       <code>Completed</code>, or <code>Failed</code>. For tasks <code>InProgress</code>, the
  *       response shows the estimated progress as a percentage.</p>
  *          <p>Tasks are listed in reverse chronological order. Currently, only tasks from the past 31
  *       days can be viewed.</p>
  *          <p>To use this API, you must have the required permissions. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ami-store-restore.html#ami-s3-permissions">Permissions for storing and restoring AMIs using Amazon S3</a> in the
- *         <i>Amazon EC2 User Guide</i>.</p>
+ *       <i>Amazon EC2 User Guide</i>.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ami-store-restore.html">Store and restore an AMI using
- *         Amazon S3</a> in the <i>Amazon EC2 User Guide</i>.</p>
+ *       Amazon S3</a> in the <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DisableAllowedImagesSettingsCommand.d.ts

@@ -28,7 +28,7 @@ declare const DisableAllowedImagesSettingsCommand_base: {
 };
 /**
  * <p>Disables Allowed AMIs for your account in the specified Amazon Web Services Region. When set to
- *         <code>disabled</code>, the image criteria in your Allowed AMIs settings do not apply, and no
+ *       <code>disabled</code>, the image criteria in your Allowed AMIs settings do not apply, and no
  *       restrictions are placed on AMI discoverability or usage. Users in your account can launch
  *       instances using any public AMI or AMI shared with your account.</p>
  *          <note>
@@ -37,7 +37,7 @@ declare const DisableAllowedImagesSettingsCommand_base: {
  *         usable by users in your account.</p>
  *          </note>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-allowed-amis.html">Control the discovery and use of AMIs in
- *           Amazon EC2 with Allowed AMIs</a> in
+ *       Amazon EC2 with Allowed AMIs</a> in
  *       <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

package/dist-types/commands/DisableImageBlockPublicAccessCommand.d.ts

@@ -32,11 +32,11 @@ declare const DisableImageBlockPublicAccessCommand_base: {
  *       from your account. With the restriction removed, you can publicly share your AMIs in the
  *       specified Amazon Web Services Region.</p>
  *          <p>The API can take up to 10 minutes to configure this setting. During this time, if you run
- *         <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_GetImageBlockPublicAccessState.html">GetImageBlockPublicAccessState</a>, the response will be
+ *       <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_GetImageBlockPublicAccessState.html">GetImageBlockPublicAccessState</a>, the response will be
  *       <code>block-new-sharing</code>. When the API has completed the configuration, the response
  *       will be <code>unblocked</code>.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/sharingamis-intro.html#block-public-access-to-amis">Block
- *         public access to your AMIs</a> in the <i>Amazon EC2 User Guide</i>.</p>
+ *       public access to your AMIs</a> in the <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DisableImageCommand.d.ts

@@ -37,7 +37,7 @@ declare const DisableImageCommand_base: {
  *          <p>Only the AMI owner can disable an AMI.</p>
  *          <p>You can re-enable a disabled AMI using <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_EnableImage.html">EnableImage</a>.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/disable-an-ami.html">Disable an AMI</a> in the
- *         <i>Amazon EC2 User Guide</i>.</p>
+ *       <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DisableImageDeprecationCommand.d.ts

@@ -29,7 +29,7 @@ declare const DisableImageDeprecationCommand_base: {
 /**
  * <p>Cancels the deprecation of the specified AMI.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ami-deprecate.html">Deprecate an AMI</a> in the
- *         <i>Amazon EC2 User Guide</i>.</p>
+ *       <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DisableImageDeregistrationProtectionCommand.d.ts

@@ -33,7 +33,7 @@ declare const DisableImageDeregistrationProtectionCommand_base: {
  *       protection for the AMI, then, when you disable deregistration protection, you won’t
  *       immediately be able to deregister the AMI.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/deregister-ami.html#ami-deregistration-protection">Protect an
- *         AMI from deregistration</a> in the <i>Amazon EC2 User Guide</i>.</p>
+ *       AMI from deregistration</a> in the <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DisableRouteServerPropagationCommand.d.ts

@@ -29,11 +29,12 @@ declare const DisableRouteServerPropagationCommand_base: {
 /**
  * <p>Disables route propagation from a route server to a specified route table.</p>
  *          <p>When enabled, route server propagation installs the routes in the FIB on the route table you've specified. Route server supports IPv4 and IPv6 route propagation.</p>
- *          <p>Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature, VPC Route Server dynamically updates VPC and gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.</p>
+ *          <p>Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature,
+ * VPC Route Server dynamically updates VPC and internet gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.</p>
  *          <p>Route server supports the follow route table types:</p>
  *          <ul>
  *             <li>
- *                <p>VPC route tables</p>
+ *                <p>VPC route tables not associated with subnets</p>
  *             </li>
  *             <li>
  *                <p>Subnet route tables</p>
@@ -43,7 +44,7 @@ declare const DisableRouteServerPropagationCommand_base: {
  *             </li>
  *          </ul>
  *          <p>Route server does not support route tables associated with virtual private gateways. To propagate routes into a transit gateway route table, use <a href="https://docs.aws.amazon.com/vpc/latest/tgw/tgw-connect.html">Transit Gateway Connect</a>.</p>
- *          <p>For more information see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
+ *          <p>For more information see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/dynamic-routing-route-server.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DisassociateRouteServerCommand.d.ts

@@ -28,8 +28,8 @@ declare const DisassociateRouteServerCommand_base: {
 };
 /**
  * <p>Disassociates a route server from a VPC.</p>
- *          <p>A route server association is the connection established between a route server and a VPC. This is a fundamental configuration step that enables the route server to work with appliances in your VPC.</p>
- *          <p>For more information see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
+ *          <p>A route server association is the connection established between a route server and a VPC.</p>
+ *          <p>For more information see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/dynamic-routing-route-server.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/EnableAllowedImagesSettingsCommand.d.ts

@@ -43,7 +43,7 @@ declare const EnableAllowedImagesSettingsCommand_base: {
  *           can launch instances using any public AMI or AMI shared with your account.</p>
  *                <p>The purpose of <code>audit-mode</code> is to indicate which AMIs will be affected when
  *           Allowed AMIs is <code>enabled</code>. In <code>audit-mode</code>, each AMI displays either
- *             <code>"ImageAllowed": true</code> or <code>"ImageAllowed": false</code> to indicate
+ *           <code>"ImageAllowed": true</code> or <code>"ImageAllowed": false</code> to indicate
  *           whether the AMI will be discoverable and available to users in the account when Allowed
  *           AMIs is enabled.</p>
  *             </li>
@@ -54,7 +54,7 @@ declare const EnableAllowedImagesSettingsCommand_base: {
  *         usable by users in your account.</p>
  *          </note>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-allowed-amis.html">Control the discovery and use of AMIs in
- *           Amazon EC2 with Allowed AMIs</a> in
+ *       Amazon EC2 with Allowed AMIs</a> in
  *       <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

package/dist-types/commands/EnableImageBlockPublicAccessCommand.d.ts

@@ -31,11 +31,11 @@ declare const EnableImageBlockPublicAccessCommand_base: {
  *       specified Amazon Web Services Region. This prevents the public sharing of your AMIs. However, if you already
  *       have public AMIs, they will remain publicly available.</p>
  *          <p>The API can take up to 10 minutes to configure this setting. During this time, if you run
- *         <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_GetImageBlockPublicAccessState.html">GetImageBlockPublicAccessState</a>, the response will be <code>unblocked</code>. When
+ *       <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_GetImageBlockPublicAccessState.html">GetImageBlockPublicAccessState</a>, the response will be <code>unblocked</code>. When
  *       the API has completed the configuration, the response will be
  *       <code>block-new-sharing</code>.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/sharingamis-intro.html#block-public-access-to-amis">Block
- *         public access to your AMIs</a> in the <i>Amazon EC2 User Guide</i>.</p>
+ *       public access to your AMIs</a> in the <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/EnableImageCommand.d.ts

@@ -34,7 +34,7 @@ declare const EnableImageCommand_base: {
  *       them again.</p>
  *          <p>Only the AMI owner can re-enable a disabled AMI.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/disable-an-ami.html">Disable an AMI</a> in the
- *         <i>Amazon EC2 User Guide</i>.</p>
+ *       <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/EnableImageDeprecationCommand.d.ts

@@ -29,7 +29,7 @@ declare const EnableImageDeprecationCommand_base: {
 /**
  * <p>Enables deprecation of the specified AMI at the specified date and time.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ami-deprecate.html">Deprecate an AMI</a> in the
- *         <i>Amazon EC2 User Guide</i>.</p>
+ *       <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/EnableImageDeregistrationProtectionCommand.d.ts

@@ -32,7 +32,7 @@ declare const EnableImageDeregistrationProtectionCommand_base: {
  *          <p>To allow the AMI to be deregistered, you must first disable deregistration protection
  *       using <a>DisableImageDeregistrationProtection</a>.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/deregister-ami.html#ami-deregistration-protection">Protect an
- *         AMI from deregistration</a> in the <i>Amazon EC2 User Guide</i>.</p>
+ *       AMI from deregistration</a> in the <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/EnableRouteServerPropagationCommand.d.ts

@@ -29,7 +29,7 @@ declare const EnableRouteServerPropagationCommand_base: {
 /**
  * <p>Defines which route tables the route server can update with routes.</p>
  *          <p>When enabled, route server propagation installs the routes in the FIB on the route table you've specified. Route server supports IPv4 and IPv6 route propagation.</p>
- *          <p>For more information see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
+ *          <p>For more information see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/dynamic-routing-route-server.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetAllowedImagesSettingsCommand.d.ts

@@ -35,7 +35,7 @@ declare const GetAllowedImagesSettingsCommand_base: {
  *         usable by users in your account.</p>
  *          </note>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-allowed-amis.html">Control the discovery and use of AMIs in
- *           Amazon EC2 with Allowed AMIs</a> in
+ *       Amazon EC2 with Allowed AMIs</a> in
  *       <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

package/dist-types/commands/GetImageBlockPublicAccessStateCommand.d.ts

@@ -30,7 +30,7 @@ declare const GetImageBlockPublicAccessStateCommand_base: {
  * <p>Gets the current state of <i>block public access for AMIs</i> at the account
  *       level in the specified Amazon Web Services Region.</p>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/sharingamis-intro.html#block-public-access-to-amis">Block
- *         public access to your AMIs</a> in the <i>Amazon EC2 User Guide</i>.</p>
+ *       public access to your AMIs</a> in the <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetRouteServerAssociationsCommand.d.ts

@@ -28,8 +28,8 @@ declare const GetRouteServerAssociationsCommand_base: {
 };
 /**
  * <p>Gets information about the associations for the specified route server.</p>
- *          <p>A route server association is the connection established between a route server and a VPC. This is a fundamental configuration step that enables the route server to work with appliances in your VPC.</p>
- *          <p>For more information see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
+ *          <p>A route server association is the connection established between a route server and a VPC.</p>
+ *          <p>For more information see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/dynamic-routing-route-server.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetRouteServerPropagationsCommand.d.ts

@@ -29,11 +29,12 @@ declare const GetRouteServerPropagationsCommand_base: {
 /**
  * <p>Gets information about the route propagations for the specified route server.</p>
  *          <p>When enabled, route server propagation installs the routes in the FIB on the route table you've specified. Route server supports IPv4 and IPv6 route propagation.</p>
- *          <p>Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature, VPC Route Server dynamically updates VPC and gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.</p>
+ *          <p>Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature,
+ * VPC Route Server dynamically updates VPC and internet gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.</p>
  *          <p>Route server supports the follow route table types:</p>
  *          <ul>
  *             <li>
- *                <p>VPC route tables</p>
+ *                <p>VPC route tables not associated with subnets</p>
  *             </li>
  *             <li>
  *                <p>Subnet route tables</p>

package/dist-types/commands/GetRouteServerRoutingDatabaseCommand.d.ts

@@ -28,11 +28,12 @@ declare const GetRouteServerRoutingDatabaseCommand_base: {
 };
 /**
  * <p>Gets the routing database for the specified route server. The <a href="https://en.wikipedia.org/wiki/Routing_table">Routing Information Base (RIB)</a> serves as a database that stores all the routing information and network topology data collected by a router or routing system, such as routes learned from BGP peers. The RIB is constantly updated as new routing information is received or existing routes change. This ensures that the route server always has the most current view of the network topology and can make optimal routing decisions.</p>
- *          <p>Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature, VPC Route Server dynamically updates VPC and gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.</p>
+ *          <p>Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature,
+ * VPC Route Server dynamically updates VPC and internet gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.</p>
  *          <p>Route server supports the follow route table types:</p>
  *          <ul>
  *             <li>
- *                <p>VPC route tables</p>
+ *                <p>VPC route tables not associated with subnets</p>
  *             </li>
  *             <li>
  *                <p>Subnet route tables</p>

package/dist-types/commands/ListImagesInRecycleBinCommand.d.ts

@@ -28,7 +28,7 @@ declare const ListImagesInRecycleBinCommand_base: {
 };
 /**
  * <p>Lists one or more AMIs that are currently in the Recycle Bin. For more information, see
- *         <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/recycle-bin.html">Recycle
+ *       <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/recycle-bin.html">Recycle
  *         Bin</a> in the <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

package/dist-types/commands/ModifyRouteServerCommand.d.ts

@@ -28,11 +28,12 @@ declare const ModifyRouteServerCommand_base: {
 };
 /**
  * <p>Modifies the configuration of an existing route server.</p>
- *          <p>Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature, VPC Route Server dynamically updates VPC and gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.</p>
+ *          <p>Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature,
+ * VPC Route Server dynamically updates VPC and internet gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.</p>
  *          <p>Route server supports the follow route table types:</p>
  *          <ul>
  *             <li>
- *                <p>VPC route tables</p>
+ *                <p>VPC route tables not associated with subnets</p>
  *             </li>
  *             <li>
  *                <p>Subnet route tables</p>
@@ -42,7 +43,7 @@ declare const ModifyRouteServerCommand_base: {
  *             </li>
  *          </ul>
  *          <p>Route server does not support route tables associated with virtual private gateways. To propagate routes into a transit gateway route table, use <a href="https://docs.aws.amazon.com/vpc/latest/tgw/tgw-connect.html">Transit Gateway Connect</a>.</p>
- *          <p>For more information see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
+ *          <p>For more information see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/dynamic-routing-route-server.html">Dynamic routing in your VPC with VPC Route Server</a> in the <i>Amazon VPC User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/ReplaceImageCriteriaInAllowedImagesSettingsCommand.d.ts

@@ -34,7 +34,7 @@ declare const ReplaceImageCriteriaInAllowedImagesSettingsCommand_base: {
  *         usable by users in your account.</p>
  *          </note>
  *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-allowed-amis.html">Control the discovery and use of AMIs in
- *           Amazon EC2 with Allowed AMIs</a> in
+ *       Amazon EC2 with Allowed AMIs</a> in
  *       <i>Amazon EC2 User Guide</i>.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

package/dist-types/models/models_0.d.ts

@@ -4470,7 +4470,7 @@ export declare const RouteServerAssociationState: {
 export type RouteServerAssociationState = (typeof RouteServerAssociationState)[keyof typeof RouteServerAssociationState];
 /**
  * <p>Describes the association between a route server and a VPC.</p>
- *          <p>A route server association is the connection established between a route server and a VPC. This is a fundamental configuration step that enables the route server to work with appliances in your VPC.</p>
+ *          <p>A route server association is the connection established between a route server and a VPC.</p>
  * @public
  */
 export interface RouteServerAssociation {

package/dist-types/models/models_1.d.ts

@@ -9489,10 +9489,11 @@ export interface LaunchTemplateInstanceNetworkInterfaceSpecificationRequest {
      */
     Description?: string | undefined;
     /**
-     * <p>The device index for the network interface attachment. Each network interface requires
-     *             a device index. If you create a launch template that includes secondary network interfaces
-     *             but not a primary network interface, then you must add a primary network interface as a
-     *             launch parameter when you launch an instance from the template.</p>
+     * <p>The device index for the network interface attachment. The primary network interface
+     *             has a device index of 0. Each network interface is of type <code>interface</code>, you
+     *             must specify a device index. If you create a launch template that includes secondary
+     *             network interfaces  but not a primary network interface, then you must add a primary
+     *             network interface as a launch parameter when you launch an instance from the template.</p>
      * @public
      */
     DeviceIndex?: number | undefined;

package/dist-types/models/models_2.d.ts

@@ -2638,7 +2638,7 @@ export interface CreateRestoreImageTaskRequest {
      *             </li>
      *             <li>
      *                <p>To tag the snapshots, the value for <code>ResourceType</code> must be
-     *             <code>snapshot</code>. The same tag is applied to all of the snapshots that are
+     *           <code>snapshot</code>. The same tag is applied to all of the snapshots that are
      *           created.</p>
      *             </li>
      *          </ul>
@@ -2851,11 +2851,12 @@ export declare const RouteServerState: {
 export type RouteServerState = (typeof RouteServerState)[keyof typeof RouteServerState];
 /**
  * <p>Describes a route server and its configuration.</p>
- *          <p>Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature, VPC Route Server dynamically updates VPC and gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.</p>
+ *          <p>Amazon VPC Route Server simplifies routing for traffic between workloads that are deployed within a VPC and its internet gateways. With this feature,
+ * VPC Route Server dynamically updates VPC and internet gateway route tables with your preferred IPv4 or IPv6 routes to achieve routing fault tolerance for those workloads. This enables you to automatically reroute traffic within a VPC, which increases the manageability of VPC routing and interoperability with third-party workloads.</p>
  *          <p>Route server supports the follow route table types:</p>
  *          <ul>
  *             <li>
- *                <p>VPC route tables</p>
+ *                <p>VPC route tables not associated with subnets</p>
  *             </li>
  *             <li>
  *                <p>Subnet route tables</p>
@@ -2971,7 +2972,7 @@ export declare const RouteServerEndpointState: {
 export type RouteServerEndpointState = (typeof RouteServerEndpointState)[keyof typeof RouteServerEndpointState];
 /**
  * <p>Describes a route server endpoint and its properties.</p>
- *          <p>A route server endpoint is an Amazon Web Services-managed component inside a subnet that facilitates BGP (Border Gateway Protocol) connections between your route server and your BGP peers. Create two endpoints per subnet for redundancy.</p>
+ *          <p>A route server endpoint is an Amazon Web Services-managed component inside a subnet that facilitates <a href="https://en.wikipedia.org/wiki/Border_Gateway_Protocol">BGP (Border Gateway Protocol)</a> connections between your route server and your BGP peers.</p>
  * @public
  */
 export interface RouteServerEndpoint {
@@ -3080,7 +3081,7 @@ export interface CreateRouteServerPeerRequest {
      */
     RouteServerEndpointId: string | undefined;
     /**
-     * <p>The IPv4 address of the peer.</p>
+     * <p>The IPv4 address of the peer device.</p>
      * @public
      */
     PeerAddress: string | undefined;
@@ -3194,7 +3195,7 @@ export declare const RouteServerPeerState: {
 export type RouteServerPeerState = (typeof RouteServerPeerState)[keyof typeof RouteServerPeerState];
 /**
  * <p>Describes a BGP peer configuration for a route server endpoint.</p>
- *          <p>A route server peer is a network appliance or function deployed in Amazon Web Services, such as firewall appliances and other network security functions, that meet these requirements:</p>
+ *          <p>A route server peer is a session between a route server endpoint and the device deployed in Amazon Web Services (such as a firewall appliance or other network security function running on an EC2 instance). The device must meet these requirements:</p>
  *          <ul>
  *             <li>
  *                <p>Have an elastic network interface in the VPC</p>
@@ -3255,7 +3256,7 @@ export interface RouteServerPeer {
      */
     EndpointEniAddress?: string | undefined;
     /**
-     * <p>The IPv4 address of the peer.</p>
+     * <p>The IPv4 address of the peer device.</p>
      * @public
      */
     PeerAddress?: string | undefined;

package/dist-types/models/models_4.d.ts

@@ -4074,8 +4074,8 @@ export interface Image {
     /**
      * <p>If <code>true</code>, the AMI satisfies the criteria for Allowed AMIs and can be
      *       discovered and used in the account. If <code>false</code> and Allowed AMIs is set to
-     *         <code>enabled</code>, the AMI can't be discovered or used in the account. If
-     *         <code>false</code> and Allowed AMIs is set to <code>audit-mode</code>, the AMI can be
+     *       <code>enabled</code>, the AMI can't be discovered or used in the account. If
+     *       <code>false</code> and Allowed AMIs is set to <code>audit-mode</code>, the AMI can be
      *       discovered and used in the account.</p>
      *          <p>For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-allowed-amis.html">Control the discovery and use of AMIs in
      *       Amazon EC2 with Allowed AMIs</a> in
@@ -5076,7 +5076,7 @@ export interface DescribeInstanceImageMetadataRequest {
      *             <li>
      *                <p>
      *                   <code>availability-zone</code> - The name of the Availability Zone (for example,
-     *             <code>us-west-2a</code>) or Local Zone (for example, <code>us-west-2-lax-1b</code>) of
+     *           <code>us-west-2a</code>) or Local Zone (for example, <code>us-west-2-lax-1b</code>) of
      *           the instance.</p>
      *             </li>
      *             <li>
@@ -5091,8 +5091,8 @@ export interface DescribeInstanceImageMetadataRequest {
      *             <li>
      *                <p>
      *                   <code>instance-state-name</code> - The state of the instance (<code>pending</code> |
-     *             <code>running</code> | <code>shutting-down</code> | <code>terminated</code> |
-     *             <code>stopping</code> | <code>stopped</code>).</p>
+     *           <code>running</code> | <code>shutting-down</code> | <code>terminated</code> |
+     *           <code>stopping</code> | <code>stopped</code>).</p>
      *             </li>
      *             <li>
      *                <p>
@@ -5103,13 +5103,13 @@ export interface DescribeInstanceImageMetadataRequest {
      *                <p>
      *                   <code>launch-time</code> - The time when the instance was launched, in the ISO 8601
      *           format in the UTC time zone (YYYY-MM-DDThh:mm:ss.sssZ), for example,
-     *             <code>2023-09-29T11:04:43.305Z</code>. You can use a wildcard (<code>*</code>), for
+     *           <code>2023-09-29T11:04:43.305Z</code>. You can use a wildcard (<code>*</code>), for
      *           example, <code>2023-09-29T*</code>, which matches an entire day.</p>
      *             </li>
      *             <li>
      *                <p>
      *                   <code>owner-alias</code> - The owner alias (<code>amazon</code> |
-     *             <code>aws-marketplace</code> | <code>aws-backup-vault</code>). The valid aliases are
+     *           <code>aws-marketplace</code> | <code>aws-backup-vault</code>). The valid aliases are
      *           defined in an Amazon-maintained list. This is not the Amazon Web Services account alias that can be set
      *           using the IAM console. We recommend that you use the <code>Owner</code> request parameter
      *           instead of this filter.</p>
@@ -5131,7 +5131,7 @@ export interface DescribeInstanceImageMetadataRequest {
      *             <li>
      *                <p>
      *                   <code>zone-id</code> - The ID of the Availability Zone (for example,
-     *             <code>usw2-az2</code>) or Local Zone (for example, <code>usw2-lax1-az1</code>) of the
+     *           <code>usw2-az2</code>) or Local Zone (for example, <code>usw2-lax1-az1</code>) of the
      *           instance.</p>
      *             </li>
      *          </ul>
@@ -5195,7 +5195,7 @@ export interface ImageMetadata {
     /**
      * <p>The alias of the AMI owner.</p>
      *          <p>Valid values: <code>amazon</code> | <code>aws-backup-vault</code> |
-     *         <code>aws-marketplace</code>
+     *       <code>aws-marketplace</code>
      *          </p>
      * @public
      */
@@ -5207,7 +5207,7 @@ export interface ImageMetadata {
     CreationDate?: string | undefined;
     /**
      * <p>The deprecation date and time of the AMI, in UTC, in the following format:
-     *         <i>YYYY</i>-<i>MM</i>-<i>DD</i>T<i>HH</i>:<i>MM</i>:<i>SS</i>Z.</p>
+     *       <i>YYYY</i>-<i>MM</i>-<i>DD</i>T<i>HH</i>:<i>MM</i>:<i>SS</i>Z.</p>
      * @public
      */
     DeprecationTime?: string | undefined;
@@ -7857,6 +7857,11 @@ export interface DescribeInstanceTypesRequest {
      *             </li>
      *             <li>
      *                <p>
+     *                   <code>dedicated-hosts-supported</code> - Indicates whether the instance type supports
+     *      Dedicated Hosts.  (<code>true</code> | <code>false</code>)</p>
+     *             </li>
+     *             <li>
+     *                <p>
      *                   <code>ebs-info.ebs-optimized-info.baseline-bandwidth-in-mbps</code> - The baseline
      *      bandwidth performance for an EBS-optimized instance type, in Mbps.</p>
      *             </li>

package/dist-types/models/models_5.d.ts

@@ -5878,7 +5878,7 @@ export interface DescribeStoreImageTasksRequest {
      *             <li>
      *                <p>
      *                   <code>task-state</code> - Returns tasks in a certain state (<code>InProgress</code> |
-     *             <code>Completed</code> | <code>Failed</code>)</p>
+     *           <code>Completed</code> | <code>Failed</code>)</p>
      *             </li>
      *             <li>
      *                <p>
@@ -5940,13 +5940,13 @@ export interface StoreImageTaskResult {
     ProgressPercentage?: number | undefined;
     /**
      * <p>The state of the store task (<code>InProgress</code>, <code>Completed</code>, or
-     *         <code>Failed</code>).</p>
+     *       <code>Failed</code>).</p>
      * @public
      */
     StoreTaskState?: string | undefined;
     /**
      * <p>If the tasks fails, the reason for the failure is returned. If the task succeeds,
-     *         <code>null</code> is returned.</p>
+     *       <code>null</code> is returned.</p>
      * @public
      */
     StoreTaskFailureReason?: string | undefined;

package/dist-types/models/models_6.d.ts

@@ -996,7 +996,7 @@ export interface EnableEbsEncryptionByDefaultResult {
  * <p>Request to create a launch template for a Windows fast launch enabled AMI.</p>
  *          <note>
  *             <p>Note - You can specify either the <code>LaunchTemplateName</code> or the
- *           <code>LaunchTemplateId</code>, but not both.</p>
+ *         <code>LaunchTemplateId</code>, but not both.</p>
  *          </note>
  * @public
  */
@@ -1370,7 +1370,7 @@ export interface EnableImageDeprecationRequest {
     ImageId: string | undefined;
     /**
      * <p>The date and time to deprecate the AMI, in UTC, in the following format:
-     *         <i>YYYY</i>-<i>MM</i>-<i>DD</i>T<i>HH</i>:<i>MM</i>:<i>SS</i>Z.
+     *       <i>YYYY</i>-<i>MM</i>-<i>DD</i>T<i>HH</i>:<i>MM</i>:<i>SS</i>Z.
      *       If you specify a value for seconds, Amazon EC2 rounds the seconds to the nearest minute.</p>
      *          <p>You can’t specify a date in the past. The upper limit for <code>DeprecateAt</code> is 10
      *       years from now, except for public AMIs, where the upper limit is 2 years from the creation
@@ -2143,7 +2143,7 @@ export interface GetAllowedImagesSettingsRequest {
  *          <p>Up to 10 <code>imageCriteria</code> objects can be specified, and up to a total of 200
  *       values for all <code>imageProviders</code>. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-allowed-amis.html#allowed-amis-json-configuration">JSON
  *         configuration for the Allowed AMIs criteria</a> in the
- *         <i>Amazon EC2 User Guide</i>.</p>
+ *       <i>Amazon EC2 User Guide</i>.</p>
  * @public
  */
 export interface ImageCriterion {
@@ -5219,7 +5219,7 @@ export interface RouteServerRoute {
     /**
      * <p>The current status of the route in the routing database. Values are <code>in-rib</code> or <code>in-fib</code> depending on if the routes are in the RIB or the FIB database.</p>
      *          <p>The <a href="https://en.wikipedia.org/wiki/Routing_table">Routing Information Base (RIB)</a> serves as a database that stores all the routing information and network topology data collected by a router or routing system, such as routes learned from BGP peers. The RIB is constantly updated as new routing information is received or existing routes change. This ensures that the route server always has the most current view of the network topology and can make optimal routing decisions.</p>
-     *          <p>The <a href="https://en.wikipedia.org/wiki/Forwarding_information_base">Forwarding Information Base (FIB)</a> serves as a forwarding table for what route server has determined are the best-path routes in the RIB after evaluating all available routing information and policies. The FIB routes that are installed on the route tables. The FIB is recomputed whenever there are changes to the RIB.</p>
+     *          <p>The <a href="https://en.wikipedia.org/wiki/Forwarding_information_base">Forwarding Information Base (FIB)</a> serves as a forwarding table for what route server has determined are the best-path routes in the RIB after evaluating all available routing information and policies. The FIB routes are installed on the route tables. The FIB is recomputed whenever there are changes to the RIB.</p>
      * @public
      */
     RouteStatus?: RouteServerRouteStatus | undefined;

package/dist-types/models/models_7.d.ts

@@ -1600,6 +1600,13 @@ export interface ModifyInstanceAttributeRequest {
     InstanceId: string | undefined;
     /**
      * <p>The name of the attribute to modify.</p>
+     *          <note>
+     *             <p>When changing the instance type: If the original instance type is configured for
+     *                 configurable bandwidth, and the desired instance type doesn't support configurable
+     *                 bandwidth, first set the existing bandwidth configuration to <code>default</code>
+     *                 using the <a>ModifyInstanceNetworkPerformanceOptions</a>
+     *                 operation.</p>
+     *          </note>
      *          <important>
      *             <p>You can modify the following attributes only: <code>disableApiTermination</code> |
      *                     <code>instanceType</code> | <code>kernel</code> | <code>ramdisk</code> |
@@ -7036,7 +7043,7 @@ export interface ReplaceIamInstanceProfileAssociationResult {
  *          <p>Up to 10 <code>imageCriteria</code> objects can be specified, and up to a total of 200
  *       values for all <code>imageProviders</code>. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-allowed-amis.html#allowed-amis-json-configuration">JSON
  *         configuration for the Allowed AMIs criteria</a> in the
- *         <i>Amazon EC2 User Guide</i>.</p>
+ *       <i>Amazon EC2 User Guide</i>.</p>
  * @public
  */
 export interface ImageCriterionRequest {

package/package.json

@@ -1,7 +1,7 @@
 {
   "name": "@aws-sdk/client-ec2",
   "description": "AWS SDK for JavaScript Ec2 Client for Node.js, Browser and React Native",
-  "version": "3.782.0",
+  "version": "3.783.0",
   "scripts": {
     "build": "concurrently 'yarn:build:cjs' 'yarn:build:es' 'yarn:build:types'",
     "build:cjs": "node ../../scripts/compilation/inline client-ec2",