@aws-sdk/client-ec2 3.682.0 → 3.686.0

package/dist-types/models/models_1.d.ts

@@ -1,4 +1,258 @@
-import { AcceleratorCount, AcceleratorCountRequest, AcceleratorManufacturer, AcceleratorName, AcceleratorTotalMemoryMiB, AcceleratorTotalMemoryMiBRequest, AcceleratorType, AccessScopePath, AccessScopePathRequest, AddIpamOperatingRegion, AddPrefixListEntry, AddressFamily, AttachmentStatus, CapacityReservation, CapacityReservationFleetState, CapacityReservationInstancePlatform, InstanceEventWindow, NatGatewayAddress, PortRange, Protocol, ResourceType, SubnetIpv6CidrBlockAssociation, Tag, TagSpecification, UnsuccessfulItem, VpcCidrBlockAssociation, VpcIpv6CidrBlockAssociation, WeekDay } from "./models_0";
+import { AcceleratorCount, AcceleratorCountRequest, AcceleratorManufacturer, AcceleratorName, AcceleratorTotalMemoryMiB, AcceleratorTotalMemoryMiBRequest, AcceleratorType, AccessScopePath, AccessScopePathRequest, AddIpamOperatingRegion, AddPrefixListEntry, AddressFamily, AttachmentStatus, CapacityAllocation, CapacityReservationFleetState, CapacityReservationInstancePlatform, CapacityReservationState, CapacityReservationTenancy, CapacityReservationType, EndDateType, InstanceEventWindow, InstanceMatchCriteria, NatGatewayAddress, PortRange, ResourceType, SubnetIpv6CidrBlockAssociation, Tag, TagSpecification, UnsuccessfulItem, VpcCidrBlockAssociation, VpcIpv6CidrBlockAssociation, WeekDay } from "./models_0";
+/**
+ * <p>Describes a Capacity Reservation.</p>
+ * @public
+ */
+export interface CapacityReservation {
+    /**
+     * <p>The ID of the Capacity Reservation.</p>
+     * @public
+     */
+    CapacityReservationId?: string;
+    /**
+     * <p>The ID of the Amazon Web Services account that owns the Capacity Reservation.</p>
+     * @public
+     */
+    OwnerId?: string;
+    /**
+     * <p>The Amazon Resource Name (ARN) of the Capacity Reservation.</p>
+     * @public
+     */
+    CapacityReservationArn?: string;
+    /**
+     * <p>The Availability Zone ID of the Capacity Reservation.</p>
+     * @public
+     */
+    AvailabilityZoneId?: string;
+    /**
+     * <p>The type of instance for which the Capacity Reservation reserves capacity.</p>
+     * @public
+     */
+    InstanceType?: string;
+    /**
+     * <p>The type of operating system for which the Capacity Reservation reserves capacity.</p>
+     * @public
+     */
+    InstancePlatform?: CapacityReservationInstancePlatform;
+    /**
+     * <p>The Availability Zone in which the capacity is reserved.</p>
+     * @public
+     */
+    AvailabilityZone?: string;
+    /**
+     * <p>Indicates the tenancy of the Capacity Reservation. A Capacity Reservation can have one of the following tenancy settings:</p>
+     *          <ul>
+     *             <li>
+     *                <p>
+     *                   <code>default</code> - The Capacity Reservation is created on hardware that is shared with other Amazon Web Services accounts.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>dedicated</code> - The Capacity Reservation is created on single-tenant hardware that is dedicated to a single Amazon Web Services account.</p>
+     *             </li>
+     *          </ul>
+     * @public
+     */
+    Tenancy?: CapacityReservationTenancy;
+    /**
+     * <p>The total number of instances for which the Capacity Reservation reserves capacity.</p>
+     * @public
+     */
+    TotalInstanceCount?: number;
+    /**
+     * <p>The remaining capacity. Indicates the number of instances that can be launched in the Capacity Reservation.</p>
+     * @public
+     */
+    AvailableInstanceCount?: number;
+    /**
+     * <p>Indicates whether the Capacity Reservation supports EBS-optimized instances. This optimization provides
+     * 			dedicated throughput to Amazon EBS and an optimized configuration stack to provide
+     * 			optimal I/O performance. This optimization isn't available with all instance types.
+     * 			Additional usage charges apply when using an EBS- optimized instance.</p>
+     * @public
+     */
+    EbsOptimized?: boolean;
+    /**
+     * <p>
+     *             <i>Deprecated.</i>
+     *          </p>
+     * @public
+     */
+    EphemeralStorage?: boolean;
+    /**
+     * <p>The current state of the Capacity Reservation. A Capacity Reservation can be in one of the following states:</p>
+     *          <ul>
+     *             <li>
+     *                <p>
+     *                   <code>active</code> - The Capacity Reservation is active and the capacity is available for your use.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>expired</code> - The Capacity Reservation expired automatically at the date and time specified
+     * 					in your request. The reserved capacity is no longer available for your use.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>cancelled</code> - The Capacity Reservation was cancelled. The reserved capacity is no
+     * 					longer available for your use.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>pending</code> - The Capacity Reservation request was successful but the capacity
+     * 					provisioning is still pending.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>failed</code> - The Capacity Reservation request has failed. A request might fail
+     * 					due to invalid request parameters, capacity constraints, or instance limit constraints.
+     * 					Failed requests are retained for 60 minutes.</p>
+     *             </li>
+     *          </ul>
+     * @public
+     */
+    State?: CapacityReservationState;
+    /**
+     * <p>The date and time at which the Capacity Reservation was started.</p>
+     * @public
+     */
+    StartDate?: Date;
+    /**
+     * <p>The date and time at which the Capacity Reservation expires. When a Capacity Reservation expires, the reserved capacity
+     * 			is released and you can no longer launch instances into it. The Capacity Reservation's state changes to
+     * 				<code>expired</code> when it reaches its end date and time.</p>
+     * @public
+     */
+    EndDate?: Date;
+    /**
+     * <p>Indicates the way in which the Capacity Reservation ends. A Capacity Reservation can have one of the following end
+     * 			types:</p>
+     *          <ul>
+     *             <li>
+     *                <p>
+     *                   <code>unlimited</code> - The Capacity Reservation remains active until you explicitly cancel it.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>limited</code> - The Capacity Reservation expires automatically at a specified date and time.</p>
+     *             </li>
+     *          </ul>
+     * @public
+     */
+    EndDateType?: EndDateType;
+    /**
+     * <p>Indicates the type of instance launches that the Capacity Reservation accepts. The options
+     * 			include:</p>
+     *          <ul>
+     *             <li>
+     *                <p>
+     *                   <code>open</code> - The Capacity Reservation accepts all instances that have matching attributes (instance type, platform,
+     * 				and Availability Zone). Instances that have matching attributes launch into the Capacity Reservation automatically without specifying
+     * 				any additional parameters.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>targeted</code> - The Capacity Reservation only accepts instances that have matching attributes
+     * 					(instance type, platform, and Availability Zone), and explicitly target the
+     * 					Capacity Reservation. This ensures that only permitted instances can use the reserved capacity. </p>
+     *             </li>
+     *          </ul>
+     * @public
+     */
+    InstanceMatchCriteria?: InstanceMatchCriteria;
+    /**
+     * <p>The date and time at which the Capacity Reservation was created.</p>
+     * @public
+     */
+    CreateDate?: Date;
+    /**
+     * <p>Any tags assigned to the Capacity Reservation.</p>
+     * @public
+     */
+    Tags?: Tag[];
+    /**
+     * <p>The Amazon Resource Name (ARN) of the Outpost on which the Capacity
+     * 	  		Reservation was created.</p>
+     * @public
+     */
+    OutpostArn?: string;
+    /**
+     * <p>The ID of the Capacity Reservation Fleet to which the Capacity Reservation belongs.
+     * 			Only valid for Capacity Reservations that were created by a Capacity Reservation Fleet.</p>
+     * @public
+     */
+    CapacityReservationFleetId?: string;
+    /**
+     * <p>The Amazon Resource Name (ARN) of the cluster placement group in which
+     * 			the Capacity Reservation was created. For more information, see
+     * 			<a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/cr-cpg.html">
+     * 				Capacity Reservations for cluster placement groups</a> in the
+     * 			<i>Amazon EC2 User Guide</i>.</p>
+     * @public
+     */
+    PlacementGroupArn?: string;
+    /**
+     * <p>Information about instance capacity usage.</p>
+     * @public
+     */
+    CapacityAllocations?: CapacityAllocation[];
+    /**
+     * <p>The type of Capacity Reservation.</p>
+     * @public
+     */
+    ReservationType?: CapacityReservationType;
+    /**
+     * <p>The ID of the Amazon Web Services account to which billing of the unused capacity
+     * 			of the Capacity Reservation is assigned.</p>
+     * @public
+     */
+    UnusedReservationBillingOwnerId?: string;
+}
+/**
+ * @public
+ */
+export interface CreateCapacityReservationResult {
+    /**
+     * <p>Information about the Capacity Reservation.</p>
+     * @public
+     */
+    CapacityReservation?: CapacityReservation;
+}
+/**
+ * @public
+ */
+export interface CreateCapacityReservationBySplittingRequest {
+    /**
+     * <p>Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is <code>UnauthorizedOperation</code>.</p>
+     * @public
+     */
+    DryRun?: boolean;
+    /**
+     * <p>Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensure Idempotency</a>.</p>
+     * @public
+     */
+    ClientToken?: string;
+    /**
+     * <p>
+     * 			The ID of the Capacity Reservation from which you want to split the available capacity.
+     * 		</p>
+     * @public
+     */
+    SourceCapacityReservationId: string | undefined;
+    /**
+     * <p>
+     * 			The number of instances to split from the source Capacity Reservation.
+     * 		</p>
+     * @public
+     */
+    InstanceCount: number | undefined;
+    /**
+     * <p>
+     * 			The tags to apply to the new Capacity Reservation.
+     * 		</p>
+     * @public
+     */
+    TagSpecifications?: TagSpecification[];
+}
 /**
  * @public
  */
@@ -7811,11 +8065,13 @@ export interface LaunchTemplateInstanceNetworkInterfaceSpecificationRequest {
     Groups?: string[];
     /**
      * <p>The type of network interface. To create an Elastic Fabric Adapter (EFA), specify
-     *                 <code>efa</code>. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/efa.html">Elastic Fabric Adapter</a> in the
+     *             <code>efa</code> or <code>efa</code>. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/efa.html">Elastic Fabric Adapter</a> in the
      *                 <i>Amazon EC2 User Guide</i>.</p>
      *          <p>If you are not creating an EFA, specify <code>interface</code> or omit this
      *             parameter.</p>
-     *          <p>Valid values: <code>interface</code> | <code>efa</code>
+     *          <p>If you specify <code>efa-only</code>, do not assign any IP addresses to the network
+     *             interface. EFA-only network interfaces do not support IP addresses.</p>
+     *          <p>Valid values: <code>interface</code> | <code>efa</code> | <code>efa-only</code>
      *          </p>
      * @public
      */
@@ -10812,114 +11068,6 @@ export interface CreateNetworkInsightsAccessScopeResult {
      */
     NetworkInsightsAccessScopeContent?: NetworkInsightsAccessScopeContent;
 }
-/**
- * <p>Describes a port range.</p>
- * @public
- */
-export interface RequestFilterPortRange {
-    /**
-     * <p>The first port in the range.</p>
-     * @public
-     */
-    FromPort?: number;
-    /**
-     * <p>The last port in the range.</p>
-     * @public
-     */
-    ToPort?: number;
-}
-/**
- * <p>Describes a set of filters for a path analysis. Use path filters to scope the analysis when
- *          there can be multiple resulting paths.</p>
- * @public
- */
-export interface PathRequestFilter {
-    /**
-     * <p>The source IPv4 address.</p>
-     * @public
-     */
-    SourceAddress?: string;
-    /**
-     * <p>The source port range.</p>
-     * @public
-     */
-    SourcePortRange?: RequestFilterPortRange;
-    /**
-     * <p>The destination IPv4 address.</p>
-     * @public
-     */
-    DestinationAddress?: string;
-    /**
-     * <p>The destination port range.</p>
-     * @public
-     */
-    DestinationPortRange?: RequestFilterPortRange;
-}
-/**
- * @public
- */
-export interface CreateNetworkInsightsPathRequest {
-    /**
-     * <p>The IP address of the source.</p>
-     * @public
-     */
-    SourceIp?: string;
-    /**
-     * <p>The IP address of the destination.</p>
-     * @public
-     */
-    DestinationIp?: string;
-    /**
-     * <p>The ID or ARN of the source. If the resource is in another account, you must specify an ARN.</p>
-     * @public
-     */
-    Source: string | undefined;
-    /**
-     * <p>The ID or ARN of the destination. If the resource is in another account, you must specify an ARN.</p>
-     * @public
-     */
-    Destination?: string;
-    /**
-     * <p>The protocol.</p>
-     * @public
-     */
-    Protocol: Protocol | undefined;
-    /**
-     * <p>The destination port.</p>
-     * @public
-     */
-    DestinationPort?: number;
-    /**
-     * <p>The tags to add to the path.</p>
-     * @public
-     */
-    TagSpecifications?: TagSpecification[];
-    /**
-     * <p>Checks whether you have the required permissions for the action, without actually making the request,
-     *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
-     *    Otherwise, it is <code>UnauthorizedOperation</code>.</p>
-     * @public
-     */
-    DryRun?: boolean;
-    /**
-     * <p>Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information,
-     *    see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">How to ensure idempotency</a>.</p>
-     * @public
-     */
-    ClientToken?: string;
-    /**
-     * <p>Scopes the analysis to network paths that match specific filters at the source. If you specify
-     *           this parameter, you can't specify the parameters for the source IP address or the destination port.</p>
-     * @public
-     */
-    FilterAtSource?: PathRequestFilter;
-    /**
-     * <p>Scopes the analysis to network paths that match specific filters at the destination. If you specify
-     *           this parameter, you can't specify the parameter for the destination IP address.</p>
-     * @public
-     */
-    FilterAtDestination?: PathRequestFilter;
-}
 /**
  * @internal
  */

package/dist-types/models/models_2.d.ts

@@ -1,5 +1,113 @@
 import { ApplianceModeSupportValue, AttachmentStatus, CurrencyCodeValues, DeviceTrustProviderType, DnsSupportValue, DynamicRoutingValue, InstanceEventWindowState, Ipv4PrefixSpecification, Ipv6SupportValue, Protocol, ReservedInstancesListing, RouteTableAssociationState, SecurityGroupReferencingSupportValue, Tag, TagSpecification, TransitGatewayAttachmentResourceType, TransitGatewayAttachmentState, TransitGatewayPeeringAttachment, TransitGatewayVpcAttachment, TrustProviderType, UnsuccessfulItem, UserTrustProviderType, VerifiedAccessInstance, VerifiedAccessSseSpecificationResponse, VerifiedAccessTrustProvider, VolumeAttachment, VpcAttachment, VpcPeeringConnection } from "./models_0";
-import { CarrierGateway, ClientVpnEndpointStatus, ClientVpnRouteStatus, CoipCidr, CoipPool, ConnectionTrackingSpecificationRequest, Ec2InstanceConnectEndpoint, GatewayType, InstanceIpv6Address, Ipam, IpamExternalResourceVerificationToken, IpamPool, IpamResourceDiscovery, IpamScope, Ipv4PrefixSpecificationRequest, Ipv6PrefixSpecificationRequest, LaunchTemplate, PrivateIpAddressSpecification, Subnet, Tenancy, VolumeType, Vpc } from "./models_1";
+import { CarrierGateway, ClientVpnEndpointStatus, ClientVpnRouteStatus, CoipCidr, CoipPool, ConnectionTrackingSpecificationRequest, Ec2InstanceConnectEndpoint, GatewayType, InstanceIpv6Address, Ipam, IpamExternalResourceVerificationToken, IpamPool, IpamResourceDiscovery, IpamScope, Ipv4PrefixSpecificationRequest, Ipv6PrefixSpecificationRequest, PrivateIpAddressSpecification, Subnet, Tenancy, VolumeType, Vpc } from "./models_1";
+/**
+ * <p>Describes a port range.</p>
+ * @public
+ */
+export interface RequestFilterPortRange {
+    /**
+     * <p>The first port in the range.</p>
+     * @public
+     */
+    FromPort?: number;
+    /**
+     * <p>The last port in the range.</p>
+     * @public
+     */
+    ToPort?: number;
+}
+/**
+ * <p>Describes a set of filters for a path analysis. Use path filters to scope the analysis when
+ *          there can be multiple resulting paths.</p>
+ * @public
+ */
+export interface PathRequestFilter {
+    /**
+     * <p>The source IPv4 address.</p>
+     * @public
+     */
+    SourceAddress?: string;
+    /**
+     * <p>The source port range.</p>
+     * @public
+     */
+    SourcePortRange?: RequestFilterPortRange;
+    /**
+     * <p>The destination IPv4 address.</p>
+     * @public
+     */
+    DestinationAddress?: string;
+    /**
+     * <p>The destination port range.</p>
+     * @public
+     */
+    DestinationPortRange?: RequestFilterPortRange;
+}
+/**
+ * @public
+ */
+export interface CreateNetworkInsightsPathRequest {
+    /**
+     * <p>The IP address of the source.</p>
+     * @public
+     */
+    SourceIp?: string;
+    /**
+     * <p>The IP address of the destination.</p>
+     * @public
+     */
+    DestinationIp?: string;
+    /**
+     * <p>The ID or ARN of the source. If the resource is in another account, you must specify an ARN.</p>
+     * @public
+     */
+    Source: string | undefined;
+    /**
+     * <p>The ID or ARN of the destination. If the resource is in another account, you must specify an ARN.</p>
+     * @public
+     */
+    Destination?: string;
+    /**
+     * <p>The protocol.</p>
+     * @public
+     */
+    Protocol: Protocol | undefined;
+    /**
+     * <p>The destination port.</p>
+     * @public
+     */
+    DestinationPort?: number;
+    /**
+     * <p>The tags to add to the path.</p>
+     * @public
+     */
+    TagSpecifications?: TagSpecification[];
+    /**
+     * <p>Checks whether you have the required permissions for the action, without actually making the request,
+     *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
+     *    Otherwise, it is <code>UnauthorizedOperation</code>.</p>
+     * @public
+     */
+    DryRun?: boolean;
+    /**
+     * <p>Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information,
+     *    see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">How to ensure idempotency</a>.</p>
+     * @public
+     */
+    ClientToken?: string;
+    /**
+     * <p>Scopes the analysis to network paths that match specific filters at the source. If you specify
+     *           this parameter, you can't specify the parameters for the source IP address or the destination port.</p>
+     * @public
+     */
+    FilterAtSource?: PathRequestFilter;
+    /**
+     * <p>Scopes the analysis to network paths that match specific filters at the destination. If you specify
+     *           this parameter, you can't specify the parameter for the destination IP address.</p>
+     * @public
+     */
+    FilterAtDestination?: PathRequestFilter;
+}
 /**
  * <p>Describes a port range.</p>
  * @public
@@ -178,7 +286,9 @@ export interface CreateNetworkInterfaceRequest {
     Ipv6PrefixCount?: number;
     /**
      * <p>The type of network interface. The default is <code>interface</code>.</p>
-     *          <p>The only supported values are <code>interface</code>, <code>efa</code>, and <code>trunk</code>.</p>
+     *          <p>If you specify <code>efa-only</code>, do not assign any IP addresses to the network
+     *             interface. EFA-only network interfaces do not support IP addresses.</p>
+     *          <p>The only supported values are <code>interface</code>, <code>efa</code>, <code>efa-only</code>, and <code>trunk</code>.</p>
      * @public
      */
     InterfaceType?: NetworkInterfaceCreationType;
@@ -1708,6 +1818,11 @@ export interface CreateSecurityGroupResult {
      * @public
      */
     Tags?: Tag[];
+    /**
+     * <p>The security group ARN.</p>
+     * @public
+     */
+    SecurityGroupArn?: string;
 }
 /**
  * @public
@@ -8115,76 +8230,6 @@ export interface DeleteKeyPairResult {
      */
     KeyPairId?: string;
 }
-/**
- * @public
- */
-export interface DeleteLaunchTemplateRequest {
-    /**
-     * <p>Checks whether you have the required permissions for the action, without actually
-     *             making the request, and provides an error response. If you have the required
-     *             permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is
-     *                 <code>UnauthorizedOperation</code>.</p>
-     * @public
-     */
-    DryRun?: boolean;
-    /**
-     * <p>The ID of the launch template.</p>
-     *          <p>You must specify either the launch template ID or the
-     *             launch template name, but not both.</p>
-     * @public
-     */
-    LaunchTemplateId?: string;
-    /**
-     * <p>The name of the launch template.</p>
-     *          <p>You must specify either the launch template ID or the
-     *             launch template name, but not both.</p>
-     * @public
-     */
-    LaunchTemplateName?: string;
-}
-/**
- * @public
- */
-export interface DeleteLaunchTemplateResult {
-    /**
-     * <p>Information about the launch template.</p>
-     * @public
-     */
-    LaunchTemplate?: LaunchTemplate;
-}
-/**
- * @public
- */
-export interface DeleteLaunchTemplateVersionsRequest {
-    /**
-     * <p>Checks whether you have the required permissions for the action, without actually
-     *             making the request, and provides an error response. If you have the required
-     *             permissions, the error response is <code>DryRunOperation</code>. Otherwise, it is
-     *                 <code>UnauthorizedOperation</code>.</p>
-     * @public
-     */
-    DryRun?: boolean;
-    /**
-     * <p>The ID of the launch template.</p>
-     *          <p>You must specify either the launch template ID or the
-     *             launch template name, but not both.</p>
-     * @public
-     */
-    LaunchTemplateId?: string;
-    /**
-     * <p>The name of the launch template.</p>
-     *          <p>You must specify either the launch template ID or the
-     *             launch template name, but not both.</p>
-     * @public
-     */
-    LaunchTemplateName?: string;
-    /**
-     * <p>The version numbers of one or more launch template versions to delete. You can specify
-     *             up to 200 launch template version numbers.</p>
-     * @public
-     */
-    Versions: string[] | undefined;
-}
 /**
  * @internal
  */