@aws-sdk/client-ec2 3.664.0 → 3.666.0

package/dist-types/models/models_1.d.ts

@@ -963,6 +963,13 @@ export interface CreateCustomerGatewayRequest {
      * @public
      */
     IpAddress?: string;
+    /**
+     * <p>For customer gateway devices that support BGP, specify the device's ASN. You must specify either <code>BgpAsn</code> or <code>BgpAsnExtended</code> when creating the customer gateway. If the ASN is larger than <code>2,147,483,647</code>, you must use <code>BgpAsnExtended</code>.</p>
+     *          <p>Valid values: <code>2,147,483,648</code> to <code>4,294,967,295</code>
+     *          </p>
+     * @public
+     */
+    BgpAsnExtended?: number;
     /**
      * <p>Checks whether you have the required permissions for the action, without actually
      *             making the request, and provides an error response. If you have the required
@@ -971,13 +978,6 @@ export interface CreateCustomerGatewayRequest {
      * @public
      */
     DryRun?: boolean;
-    /**
-     * <p>For customer gateway devices that support BGP, specify the device's ASN. You must specify either <code>BgpAsn</code> or <code>BgpAsnExtended</code> when creating the customer gateway. If the ASN is larger than <code>2,147,483,647</code>, you must use <code>BgpAsnExtended</code>.</p>
-     *          <p>Valid values: <code>2,147,483,648</code> to <code>4,294,967,295</code>
-     *          </p>
-     * @public
-     */
-    BgpAsnExtended?: number;
 }
 /**
  * <p>Describes a customer gateway.</p>
@@ -985,30 +985,33 @@ export interface CreateCustomerGatewayRequest {
  */
 export interface CustomerGateway {
     /**
-     * <p>The customer gateway device's Border Gateway Protocol (BGP) Autonomous System Number
-     *             (ASN).</p>
-     *          <p>Valid values: <code>1</code> to <code>2,147,483,647</code>
-     *          </p>
+     * <p>The Amazon Resource Name (ARN) for the customer gateway certificate.</p>
      * @public
      */
-    BgpAsn?: string;
+    CertificateArn?: string;
     /**
-     * <p>The ID of the customer gateway.</p>
+     * <p>The name of customer gateway device.</p>
      * @public
      */
-    CustomerGatewayId?: string;
+    DeviceName?: string;
     /**
-     * <p>
-     *             IPv4 address for the customer gateway device's outside interface. The address must be static. If <code>OutsideIpAddressType</code> in your VPN connection options is set to <code>PrivateIpv4</code>, you can use an RFC6598 or RFC1918 private IPv4 address. If <code>OutsideIpAddressType</code> is set to <code>PublicIpv4</code>, you can use a public IPv4 address.
-     *         </p>
+     * <p>Any tags assigned to the customer gateway.</p>
      * @public
      */
-    IpAddress?: string;
+    Tags?: Tag[];
     /**
-     * <p>The Amazon Resource Name (ARN) for the customer gateway certificate.</p>
+     * <p>The customer gateway device's Border Gateway Protocol (BGP) Autonomous System Number
+     *             (ASN).</p>
+     *          <p>Valid values: <code>2,147,483,648</code> to <code>4,294,967,295</code>
+     *          </p>
      * @public
      */
-    CertificateArn?: string;
+    BgpAsnExtended?: string;
+    /**
+     * <p>The ID of the customer gateway.</p>
+     * @public
+     */
+    CustomerGatewayId?: string;
     /**
      * <p>The current state of the customer gateway (<code>pending | available | deleting |
      *                 deleted</code>).</p>
@@ -1022,23 +1025,20 @@ export interface CustomerGateway {
      */
     Type?: string;
     /**
-     * <p>The name of customer gateway device.</p>
-     * @public
-     */
-    DeviceName?: string;
-    /**
-     * <p>Any tags assigned to the customer gateway.</p>
+     * <p>
+     *             IPv4 address for the customer gateway device's outside interface. The address must be static. If <code>OutsideIpAddressType</code> in your VPN connection options is set to <code>PrivateIpv4</code>, you can use an RFC6598 or RFC1918 private IPv4 address. If <code>OutsideIpAddressType</code> is set to <code>PublicIpv4</code>, you can use a public IPv4 address.
+     *         </p>
      * @public
      */
-    Tags?: Tag[];
+    IpAddress?: string;
     /**
      * <p>The customer gateway device's Border Gateway Protocol (BGP) Autonomous System Number
      *             (ASN).</p>
-     *          <p>Valid values: <code>2,147,483,648</code> to <code>4,294,967,295</code>
+     *          <p>Valid values: <code>1</code> to <code>2,147,483,647</code>
      *          </p>
      * @public
      */
-    BgpAsnExtended?: string;
+    BgpAsn?: string;
 }
 /**
  * <p>Contains the output of CreateCustomerGateway.</p>
@@ -1130,32 +1130,11 @@ export type SubnetState = (typeof SubnetState)[keyof typeof SubnetState];
  * @public
  */
 export interface Subnet {
-    /**
-     * <p>The Availability Zone of the subnet.</p>
-     * @public
-     */
-    AvailabilityZone?: string;
     /**
      * <p>The AZ ID of the subnet.</p>
      * @public
      */
     AvailabilityZoneId?: string;
-    /**
-     * <p>The number of unused private IPv4 addresses in the subnet. The IPv4 addresses for any
-     * 			stopped instances are considered unavailable.</p>
-     * @public
-     */
-    AvailableIpAddressCount?: number;
-    /**
-     * <p>The IPv4 CIDR block assigned to the subnet.</p>
-     * @public
-     */
-    CidrBlock?: string;
-    /**
-     * <p>Indicates whether this is the default subnet for the Availability Zone.</p>
-     * @public
-     */
-    DefaultForAz?: boolean;
     /**
      * <p>
      *             Indicates the device position for local network interfaces in this subnet. For example,
@@ -1165,13 +1144,6 @@ export interface Subnet {
      * @public
      */
     EnableLniAtDeviceIndex?: number;
-    /**
-     * <p>Indicates whether instances launched in this subnet receive a public IPv4 address.</p>
-     *          <p>Amazon Web Services charges for all public IPv4 addresses, including public IPv4 addresses
-     * associated with running instances and Elastic IP addresses. For more information, see the <i>Public IPv4 Address</i> tab on the <a href="http://aws.amazon.com/vpc/pricing/">Amazon VPC pricing page</a>.</p>
-     * @public
-     */
-    MapPublicIpOnLaunch?: boolean;
     /**
      * <p>Indicates whether a network interface created in this subnet (including a network
      *             interface created by <a>RunInstances</a>) receives a customer-owned IPv4 address.</p>
@@ -1183,21 +1155,6 @@ export interface Subnet {
      * @public
      */
     CustomerOwnedIpv4Pool?: string;
-    /**
-     * <p>The current state of the subnet.</p>
-     * @public
-     */
-    State?: SubnetState;
-    /**
-     * <p>The ID of the subnet.</p>
-     * @public
-     */
-    SubnetId?: string;
-    /**
-     * <p>The ID of the VPC the subnet is in.</p>
-     * @public
-     */
-    VpcId?: string;
     /**
      * <p>The ID of the Amazon Web Services account that owns the subnet.</p>
      * @public
@@ -1246,6 +1203,49 @@ export interface Subnet {
      * @public
      */
     PrivateDnsNameOptionsOnLaunch?: PrivateDnsNameOptionsOnLaunch;
+    /**
+     * <p>The ID of the subnet.</p>
+     * @public
+     */
+    SubnetId?: string;
+    /**
+     * <p>The current state of the subnet.</p>
+     * @public
+     */
+    State?: SubnetState;
+    /**
+     * <p>The ID of the VPC the subnet is in.</p>
+     * @public
+     */
+    VpcId?: string;
+    /**
+     * <p>The IPv4 CIDR block assigned to the subnet.</p>
+     * @public
+     */
+    CidrBlock?: string;
+    /**
+     * <p>The number of unused private IPv4 addresses in the subnet. The IPv4 addresses for any
+     * 			stopped instances are considered unavailable.</p>
+     * @public
+     */
+    AvailableIpAddressCount?: number;
+    /**
+     * <p>The Availability Zone of the subnet.</p>
+     * @public
+     */
+    AvailabilityZone?: string;
+    /**
+     * <p>Indicates whether this is the default subnet for the Availability Zone.</p>
+     * @public
+     */
+    DefaultForAz?: boolean;
+    /**
+     * <p>Indicates whether instances launched in this subnet receive a public IPv4 address.</p>
+     *          <p>Amazon Web Services charges for all public IPv4 addresses, including public IPv4 addresses
+     * associated with running instances and Elastic IP addresses. For more information, see the <i>Public IPv4 Address</i> tab on the <a href="http://aws.amazon.com/vpc/pricing/">Amazon VPC pricing page</a>.</p>
+     * @public
+     */
+    MapPublicIpOnLaunch?: boolean;
 }
 /**
  * @public
@@ -1299,26 +1299,6 @@ export type VpcState = (typeof VpcState)[keyof typeof VpcState];
  * @public
  */
 export interface Vpc {
-    /**
-     * <p>The primary IPv4 CIDR block for the VPC.</p>
-     * @public
-     */
-    CidrBlock?: string;
-    /**
-     * <p>The ID of the set of DHCP options you've associated with the VPC.</p>
-     * @public
-     */
-    DhcpOptionsId?: string;
-    /**
-     * <p>The current state of the VPC.</p>
-     * @public
-     */
-    State?: VpcState;
-    /**
-     * <p>The ID of the VPC.</p>
-     * @public
-     */
-    VpcId?: string;
     /**
      * <p>The ID of the Amazon Web Services account that owns the VPC.</p>
      * @public
@@ -1349,6 +1329,26 @@ export interface Vpc {
      * @public
      */
     Tags?: Tag[];
+    /**
+     * <p>The ID of the VPC.</p>
+     * @public
+     */
+    VpcId?: string;
+    /**
+     * <p>The current state of the VPC.</p>
+     * @public
+     */
+    State?: VpcState;
+    /**
+     * <p>The primary IPv4 CIDR block for the VPC.</p>
+     * @public
+     */
+    CidrBlock?: string;
+    /**
+     * <p>The ID of the set of DHCP options you've associated with the VPC.</p>
+     * @public
+     */
+    DhcpOptionsId?: string;
 }
 /**
  * @public
@@ -1431,25 +1431,25 @@ export interface DhcpConfiguration {
  */
 export interface DhcpOptions {
     /**
-     * <p>The DHCP options in the set.</p>
+     * <p>The ID of the Amazon Web Services account that owns the DHCP options set.</p>
      * @public
      */
-    DhcpConfigurations?: DhcpConfiguration[];
+    OwnerId?: string;
     /**
-     * <p>The ID of the set of DHCP options.</p>
+     * <p>Any tags assigned to the DHCP options set.</p>
      * @public
      */
-    DhcpOptionsId?: string;
+    Tags?: Tag[];
     /**
-     * <p>The ID of the Amazon Web Services account that owns the DHCP options set.</p>
+     * <p>The ID of the set of DHCP options.</p>
      * @public
      */
-    OwnerId?: string;
+    DhcpOptionsId?: string;
     /**
-     * <p>Any tags assigned to the DHCP options set.</p>
+     * <p>The DHCP options in the set.</p>
      * @public
      */
-    Tags?: Tag[];
+    DhcpConfigurations?: DhcpConfiguration[];
 }
 /**
  * @public
@@ -2204,14 +2204,6 @@ export interface InstanceRequirementsRequest {
  * @public
  */
 export interface Placement {
-    /**
-     * <p>The Availability Zone of the instance.</p>
-     *          <p>If not specified, an Availability Zone will be automatically chosen for you based on
-     *             the load balancing criteria for the Region.</p>
-     *          <p>This parameter is not supported for <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateFleet">CreateFleet</a>.</p>
-     * @public
-     */
-    AvailabilityZone?: string;
     /**
      * <p>The affinity setting for the instance on the Dedicated Host.</p>
      *          <p>This parameter is not supported for <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateFleet">CreateFleet</a> or <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_ImportInstance.html">ImportInstance</a>.</p>
@@ -2265,6 +2257,14 @@ export interface Placement {
      * @public
      */
     GroupId?: string;
+    /**
+     * <p>The Availability Zone of the instance.</p>
+     *          <p>If not specified, an Availability Zone will be automatically chosen for you based on
+     *             the load balancing criteria for the Region.</p>
+     *          <p>This parameter is not supported for <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateFleet">CreateFleet</a>.</p>
+     * @public
+     */
+    AvailabilityZone?: string;
 }
 /**
  * <p>Describes overrides for a launch template.</p>
@@ -3990,8 +3990,8 @@ export interface CreateFlowLogsRequest {
      * <p>The fields to include in the flow log record. List the fields in the order in which
      *             they should appear. If you omit this parameter, the flow log is created using the
      *             default format. If you specify this parameter, you must include at least one
-     *             field. For more information about the available fields, see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/flow-logs.html#flow-log-records">Flow log
-     *                 records</a> in the <i>Amazon VPC User Guide</i> or <a href="https://docs.aws.amazon.com/vpc/latest/tgw/tgw-flow-logs.html#flow-log-records">Transit Gateway Flow Log
+     *             field. For more information about the available fields, see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/flow-log-records.html">Flow log records</a>
+     *             in the <i>Amazon VPC User Guide</i> or <a href="https://docs.aws.amazon.com/vpc/latest/tgw/tgw-flow-logs.html#flow-log-records">Transit Gateway Flow Log
      *                     records</a> in the <i>Amazon Web Services Transit Gateway Guide</i>.</p>
      *          <p>Specify the fields using the <code>$\{field-id\}</code> format, separated by spaces.</p>
      * @public
@@ -4282,6 +4282,19 @@ export interface EbsBlockDevice {
  * @public
  */
 export interface BlockDeviceMapping {
+    /**
+     * <p>Parameters used to automatically set up EBS volumes when the instance is
+     *             launched.</p>
+     * @public
+     */
+    Ebs?: EbsBlockDevice;
+    /**
+     * <p>To omit the device from the block device mapping, specify an empty string. When this
+     *             property is specified, the device is removed from the block device mapping regardless of
+     *             the assigned value.</p>
+     * @public
+     */
+    NoDevice?: string;
     /**
      * <p>The device name (for example, <code>/dev/sdh</code> or <code>xvdh</code>).</p>
      * @public
@@ -4301,52 +4314,31 @@ export interface BlockDeviceMapping {
      * @public
      */
     VirtualName?: string;
-    /**
-     * <p>Parameters used to automatically set up EBS volumes when the instance is
-     *             launched.</p>
-     * @public
-     */
-    Ebs?: EbsBlockDevice;
-    /**
-     * <p>To omit the device from the block device mapping, specify an empty string. When this
-     *             property is specified, the device is removed from the block device mapping regardless of
-     *             the assigned value.</p>
-     * @public
-     */
-    NoDevice?: string;
 }
 /**
  * @public
  */
 export interface CreateImageRequest {
     /**
-     * <p>The block device mappings.</p>
-     *          <p>When using the CreateImage action:</p>
+     * <p>The tags to apply to the AMI and snapshots on creation. You can tag the AMI, the
+     *       snapshots, or both.</p>
      *          <ul>
      *             <li>
-     *                <p>You can't change the volume size using the VolumeSize parameter. If you want a
-     *           different volume size, you must first change the volume size of the source
-     *           instance.</p>
-     *             </li>
-     *             <li>
-     *                <p>You can't modify the encryption status of existing volumes or snapshots. To create an
-     *           AMI with volumes or snapshots that have a different encryption status (for example, where
-     *           the source volume and snapshots are unencrypted, and you want to create an AMI with
-     *           encrypted volumes or snapshots), use the <a>CopyImage</a> action.</p>
+     *                <p>To tag the AMI, the value for <code>ResourceType</code> must be
+     *           <code>image</code>.</p>
      *             </li>
      *             <li>
-     *                <p>The only option that can be changed for existing mappings or snapshots is
-     *             <code>DeleteOnTermination</code>.</p>
+     *                <p>To tag the snapshots that are created of the root volume and of other Amazon EBS volumes that
+     *           are attached to the instance, the value for <code>ResourceType</code> must be
+     *             <code>snapshot</code>. The same tag is applied to all of the snapshots that are
+     *           created.</p>
      *             </li>
      *          </ul>
+     *          <p>If you specify other values for <code>ResourceType</code>, the request fails.</p>
+     *          <p>To tag an AMI or snapshot after it has been created, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateTags.html">CreateTags</a>. </p>
      * @public
      */
-    BlockDeviceMappings?: BlockDeviceMapping[];
-    /**
-     * <p>A description for the new image.</p>
-     * @public
-     */
-    Description?: string;
+    TagSpecifications?: TagSpecification[];
     /**
      * <p>Checks whether you have the required permissions for the action, without actually making the request,
      * 			and provides an error response. If you have the required permissions, the error response is
@@ -4365,6 +4357,11 @@ export interface CreateImageRequest {
      * @public
      */
     Name: string | undefined;
+    /**
+     * <p>A description for the new image.</p>
+     * @public
+     */
+    Description?: string;
     /**
      * <p>Indicates whether or not the instance should be automatically rebooted before creating
      *        the image. Specify one of the following values:</p>
@@ -4389,25 +4386,28 @@ export interface CreateImageRequest {
      */
     NoReboot?: boolean;
     /**
-     * <p>The tags to apply to the AMI and snapshots on creation. You can tag the AMI, the
-     *       snapshots, or both.</p>
+     * <p>The block device mappings.</p>
+     *          <p>When using the CreateImage action:</p>
      *          <ul>
      *             <li>
-     *                <p>To tag the AMI, the value for <code>ResourceType</code> must be
-     *           <code>image</code>.</p>
+     *                <p>You can't change the volume size using the VolumeSize parameter. If you want a
+     *           different volume size, you must first change the volume size of the source
+     *           instance.</p>
      *             </li>
      *             <li>
-     *                <p>To tag the snapshots that are created of the root volume and of other Amazon EBS volumes that
-     *           are attached to the instance, the value for <code>ResourceType</code> must be
-     *             <code>snapshot</code>. The same tag is applied to all of the snapshots that are
-     *           created.</p>
+     *                <p>You can't modify the encryption status of existing volumes or snapshots. To create an
+     *           AMI with volumes or snapshots that have a different encryption status (for example, where
+     *           the source volume and snapshots are unencrypted, and you want to create an AMI with
+     *           encrypted volumes or snapshots), use the <a>CopyImage</a> action.</p>
+     *             </li>
+     *             <li>
+     *                <p>The only option that can be changed for existing mappings or snapshots is
+     *             <code>DeleteOnTermination</code>.</p>
      *             </li>
      *          </ul>
-     *          <p>If you specify other values for <code>ResourceType</code>, the request fails.</p>
-     *          <p>To tag an AMI or snapshot after it has been created, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_CreateTags.html">CreateTags</a>. </p>
      * @public
      */
-    TagSpecifications?: TagSpecification[];
+    BlockDeviceMappings?: BlockDeviceMapping[];
 }
 /**
  * @public
@@ -4722,16 +4722,16 @@ export type DiskImageFormat = (typeof DiskImageFormat)[keyof typeof DiskImageFor
  */
 export interface ExportToS3TaskSpecification {
     /**
-     * <p>The container format used to combine disk images with metadata (such as OVF). If absent, only the disk image is
-     *    exported.</p>
+     * <p>The format for the exported image.</p>
      * @public
      */
-    ContainerFormat?: ContainerFormat;
+    DiskImageFormat?: DiskImageFormat;
     /**
-     * <p>The format for the exported image.</p>
+     * <p>The container format used to combine disk images with metadata (such as OVF). If absent, only the disk image is
+     *    exported.</p>
      * @public
      */
-    DiskImageFormat?: DiskImageFormat;
+    ContainerFormat?: ContainerFormat;
     /**
      * <p>The Amazon S3 bucket for the destination image. The destination bucket must exist and have
      *    an access control list (ACL) attached that specifies the Region-specific canonical account ID for
@@ -4764,15 +4764,15 @@ export type ExportEnvironment = (typeof ExportEnvironment)[keyof typeof ExportEn
  */
 export interface CreateInstanceExportTaskRequest {
     /**
-     * <p>A description for the conversion task or the resource being exported. The maximum length is 255 characters.</p>
+     * <p>The tags to apply to the export instance task during creation.</p>
      * @public
      */
-    Description?: string;
+    TagSpecifications?: TagSpecification[];
     /**
-     * <p>The format and location for an export instance task.</p>
+     * <p>A description for the conversion task or the resource being exported. The maximum length is 255 characters.</p>
      * @public
      */
-    ExportToS3Task: ExportToS3TaskSpecification | undefined;
+    Description?: string;
     /**
      * <p>The ID of the instance.</p>
      * @public
@@ -4784,10 +4784,10 @@ export interface CreateInstanceExportTaskRequest {
      */
     TargetEnvironment: ExportEnvironment | undefined;
     /**
-     * <p>The tags to apply to the export instance task during creation.</p>
+     * <p>The format and location for an export instance task.</p>
      * @public
      */
-    TagSpecifications?: TagSpecification[];
+    ExportToS3Task: ExportToS3TaskSpecification | undefined;
 }
 /**
  * <p>Describes the format and location for the export task.</p>
@@ -5377,7 +5377,7 @@ export interface CreateIpamPoolRequest {
      *             </li>
      *          </ul>
      *          <p>If you do not choose a locale, resources in Regions others than the IPAM's home region cannot use CIDRs from this pool.</p>
-     *          <p>Possible values: Any Amazon Web Services Region or supported Amazon Web Services Local Zone.</p>
+     *          <p>Possible values: Any Amazon Web Services Region or supported Amazon Web Services Local Zone. Default is <code>none</code> and means any locale.</p>
      * @public
      */
     Locale?: string;
@@ -6025,13 +6025,6 @@ export interface CreateKeyPairRequest {
      * @public
      */
     KeyName: string | undefined;
-    /**
-     * <p>Checks whether you have the required permissions for the action, without actually making the request,
-     *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
-     *    Otherwise, it is <code>UnauthorizedOperation</code>.</p>
-     * @public
-     */
-    DryRun?: boolean;
     /**
      * <p>The type of key pair. Note that ED25519 keys are not supported for Windows instances.</p>
      *          <p>Default: <code>rsa</code>
@@ -6051,6 +6044,13 @@ export interface CreateKeyPairRequest {
      * @public
      */
     KeyFormat?: KeyFormat;
+    /**
+     * <p>Checks whether you have the required permissions for the action, without actually making the request,
+     *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
+     *    Otherwise, it is <code>UnauthorizedOperation</code>.</p>
+     * @public
+     */
+    DryRun?: boolean;
 }
 /**
  * <p>Describes a key pair.</p>
@@ -6058,37 +6058,37 @@ export interface CreateKeyPairRequest {
  */
 export interface KeyPair {
     /**
-     * <ul>
-     *             <li>
-     *                <p>For RSA key pairs, the key fingerprint is the SHA-1 digest of the DER encoded private key.</p>
-     *             </li>
-     *             <li>
-     *                <p>For ED25519 key pairs, the key fingerprint is the base64-encoded SHA-256 digest, which is the default for OpenSSH, starting with OpenSSH 6.8.</p>
-     *             </li>
-     *          </ul>
+     * <p>The ID of the key pair.</p>
      * @public
      */
-    KeyFingerprint?: string;
+    KeyPairId?: string;
     /**
-     * <p>An unencrypted PEM encoded RSA or ED25519 private key.</p>
+     * <p>Any tags applied to the key pair.</p>
      * @public
      */
-    KeyMaterial?: string;
+    Tags?: Tag[];
     /**
      * <p>The name of the key pair.</p>
      * @public
      */
     KeyName?: string;
     /**
-     * <p>The ID of the key pair.</p>
+     * <ul>
+     *             <li>
+     *                <p>For RSA key pairs, the key fingerprint is the SHA-1 digest of the DER encoded private key.</p>
+     *             </li>
+     *             <li>
+     *                <p>For ED25519 key pairs, the key fingerprint is the base64-encoded SHA-256 digest, which is the default for OpenSSH, starting with OpenSSH 6.8.</p>
+     *             </li>
+     *          </ul>
      * @public
      */
-    KeyPairId?: string;
+    KeyFingerprint?: string;
     /**
-     * <p>Any tags applied to the key pair.</p>
+     * <p>An unencrypted PEM encoded RSA or ED25519 private key.</p>
      * @public
      */
-    Tags?: Tag[];
+    KeyMaterial?: string;
 }
 /**
  * <p>The parameters for a block device for an EBS volume.</p>
@@ -9296,20 +9296,20 @@ export interface CreateNatGatewayRequest {
      */
     PrivateIpAddress?: string;
     /**
-     * <p>Secondary EIP allocation IDs. For more information, see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/vpc-nat-gateway.html#nat-gateway-creating">Create a NAT gateway</a>
+     * <p>Secondary EIP allocation IDs. For more information, see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/nat-gateway-working-with.html">Create a NAT gateway</a>
      *             in the <i>Amazon VPC User Guide</i>.</p>
      * @public
      */
     SecondaryAllocationIds?: string[];
     /**
      * <p>Secondary private IPv4 addresses. For more information about secondary addresses, see
-     *             <a href="https://docs.aws.amazon.com/vpc/latest/userguide/vpc-nat-gateway.html#nat-gateway-creating">Create a NAT gateway</a> in the <i>Amazon VPC User Guide</i>.</p>
+     *             <a href="https://docs.aws.amazon.com/vpc/latest/userguide/nat-gateway-working-with.html">Create a NAT gateway</a> in the <i>Amazon VPC User Guide</i>.</p>
      * @public
      */
     SecondaryPrivateIpAddresses?: string[];
     /**
      * <p>[Private NAT gateway only] The number of secondary private IPv4 addresses you want to assign to the NAT gateway.
-     *             For more information about secondary addresses, see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/vpc-nat-gateway.html#nat-gateway-creating">Create a NAT gateway</a>
+     *             For more information about secondary addresses, see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/nat-gateway-working-with.html">Create a NAT gateway</a>
      *             in the <i>Amazon VPC User Guide</i>.</p>
      * @public
      */
@@ -9499,28 +9499,28 @@ export interface CreateNatGatewayResult {
  */
 export interface CreateNetworkAclRequest {
     /**
-     * <p>Checks whether you have the required permissions for the action, without actually making the request,
-     *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
-     *    Otherwise, it is <code>UnauthorizedOperation</code>.</p>
+     * <p>The tags to assign to the network ACL.</p>
      * @public
      */
-    DryRun?: boolean;
+    TagSpecifications?: TagSpecification[];
     /**
-     * <p>The ID of the VPC.</p>
+     * <p>Unique, case-sensitive identifier that you provide to ensure the idempotency of the
+     *             request. For more information, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency</a>.</p>
      * @public
      */
-    VpcId: string | undefined;
+    ClientToken?: string;
     /**
-     * <p>The tags to assign to the network ACL.</p>
+     * <p>Checks whether you have the required permissions for the action, without actually making the request,
+     *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
+     *    Otherwise, it is <code>UnauthorizedOperation</code>.</p>
      * @public
      */
-    TagSpecifications?: TagSpecification[];
+    DryRun?: boolean;
     /**
-     * <p>Unique, case-sensitive identifier that you provide to ensure the idempotency of the
-     *             request. For more information, see <a href="https://docs.aws.amazon.com/ec2/latest/devguide/ec2-api-idempotency.html">Ensuring idempotency</a>.</p>
+     * <p>The ID of the VPC.</p>
      * @public
      */
-    ClientToken?: string;
+    VpcId: string | undefined;
 }
 /**
  * <p>Describes an association between a network ACL and a subnet.</p>
@@ -9677,12 +9677,6 @@ export interface CreateNetworkAclResult {
  * @public
  */
 export interface CreateNetworkAclEntryRequest {
-    /**
-     * <p>The IPv4 network range to allow or deny, in CIDR notation (for example
-     * 		        <code>172.16.0.0/24</code>). We modify the specified CIDR block to its canonical form; for example, if you specify <code>100.68.0.18/18</code>, we modify it to <code>100.68.0.0/18</code>.</p>
-     * @public
-     */
-    CidrBlock?: string;
     /**
      * <p>Checks whether you have the required permissions for the action, without actually making the request,
      *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
@@ -9690,34 +9684,17 @@ export interface CreateNetworkAclEntryRequest {
      * @public
      */
     DryRun?: boolean;
-    /**
-     * <p>Indicates whether this is an egress rule (rule is applied to traffic leaving the subnet).</p>
-     * @public
-     */
-    Egress: boolean | undefined;
-    /**
-     * <p>ICMP protocol: The ICMP or ICMPv6 type and code. Required if specifying protocol
-     * 		        1 (ICMP) or protocol 58 (ICMPv6) with an IPv6 CIDR block.</p>
-     * @public
-     */
-    IcmpTypeCode?: IcmpTypeCode;
-    /**
-     * <p>The IPv6 network range to allow or deny, in CIDR notation (for example
-     *                 <code>2001:db8:1234:1a00::/64</code>).</p>
-     * @public
-     */
-    Ipv6CidrBlock?: string;
     /**
      * <p>The ID of the network ACL.</p>
      * @public
      */
     NetworkAclId: string | undefined;
     /**
-     * <p>TCP or UDP protocols: The range of ports the rule applies to.
-     * 		        Required if specifying protocol 6 (TCP) or 17 (UDP).</p>
+     * <p>The rule number for the entry (for example, 100). ACL entries are processed in ascending order by rule number.</p>
+     *          <p>Constraints: Positive integer from 1 to 32766. The range 32767 to 65535 is reserved for internal use.</p>
      * @public
      */
-    PortRange?: PortRange;
+    RuleNumber: number | undefined;
     /**
      * <p>The protocol number. A value of "-1" means all protocols. If you specify "-1" or a
      *   			protocol number other than "6" (TCP), "17" (UDP), or "1" (ICMP), traffic on all ports is
@@ -9734,11 +9711,34 @@ export interface CreateNetworkAclEntryRequest {
      */
     RuleAction: RuleAction | undefined;
     /**
-     * <p>The rule number for the entry (for example, 100). ACL entries are processed in ascending order by rule number.</p>
-     *          <p>Constraints: Positive integer from 1 to 32766. The range 32767 to 65535 is reserved for internal use.</p>
+     * <p>Indicates whether this is an egress rule (rule is applied to traffic leaving the subnet).</p>
      * @public
      */
-    RuleNumber: number | undefined;
+    Egress: boolean | undefined;
+    /**
+     * <p>The IPv4 network range to allow or deny, in CIDR notation (for example
+     * 		        <code>172.16.0.0/24</code>). We modify the specified CIDR block to its canonical form; for example, if you specify <code>100.68.0.18/18</code>, we modify it to <code>100.68.0.0/18</code>.</p>
+     * @public
+     */
+    CidrBlock?: string;
+    /**
+     * <p>The IPv6 network range to allow or deny, in CIDR notation (for example
+     *                 <code>2001:db8:1234:1a00::/64</code>).</p>
+     * @public
+     */
+    Ipv6CidrBlock?: string;
+    /**
+     * <p>ICMP protocol: The ICMP or ICMPv6 type and code. Required if specifying protocol
+     * 		        1 (ICMP) or protocol 58 (ICMPv6) with an IPv6 CIDR block.</p>
+     * @public
+     */
+    IcmpTypeCode?: IcmpTypeCode;
+    /**
+     * <p>TCP or UDP protocols: The range of ports the rule applies to.
+     * 		        Required if specifying protocol 6 (TCP) or 17 (UDP).</p>
+     * @public
+     */
+    PortRange?: PortRange;
 }
 /**
  * @public