@aws-sdk/client-ec2 3.216.0 → 3.219.0

package/dist-types/models/models_4.d.ts

@@ -1,7 +1,240 @@
-import { _InstanceType, ActiveInstance, ActivityStatus, AddressTransfer, AllocationStrategy, AllowedPrincipal, AlternatePathHint, AssociationStatus, BatchState, CurrencyCodeValues, Explanation, IamInstanceProfileAssociation, IamInstanceProfileSpecification, InstanceEventWindow, IpPermission, PathComponent, ReservedInstancesListing, ResourceType, SecurityGroupRule, SubnetIpv6CidrBlockAssociation, Tag, TagSpecification, TransitGatewayAssociationState, TransitGatewayAttachmentResourceType, TransitGatewayAttachmentState, TransitGatewayMulticastDomainAssociations, TransitGatewayPeeringAttachment, TransitGatewayPolicyTableAssociation, TransitGatewayVpcAttachment, TrunkInterfaceAssociation, UserIdGroupPair, VpcPeeringConnection } from "./models_0";
-import { AttributeValue, BlockDeviceMapping, FleetLaunchTemplateSpecification, FleetType, GroupIdentifier, InstanceInterruptionBehavior, InstanceIpv6Address, InstanceRequirements, Ipv4PrefixSpecificationRequest, Ipv6PrefixSpecificationRequest, LaunchTemplate, LaunchTemplateVersion, LocalGatewayRouteTable, LocalGatewayRouteTableVirtualInterfaceGroupAssociation, LocalGatewayRouteTableVpcAssociation, ManagedPrefixList, NatGateway, NetworkAcl, NetworkInsightsAccessScope, NetworkInsightsPath, NetworkInterface, NetworkInterfaceAttachment, NetworkInterfacePermission, PlacementGroup, PrivateIpAddressSpecification, ReplaceRootVolumeTask, RouteTable, Snapshot, SnapshotState, SpotDatafeedSubscription, SpotInstanceStateFault, SpotInstanceType, StorageTier, Subnet, TargetCapacityUnitType, Tenancy, VolumeType, Vpc } from "./models_1";
+import { _InstanceType, ActiveInstance, ActivityStatus, AddressTransfer, AllocationStrategy, AllowedPrincipal, AlternatePathHint, AssociationStatus, BatchState, CurrencyCodeValues, Explanation, IamInstanceProfileSpecification, IpPermission, PathComponent, ReservedInstancesListing, ResourceType, SecurityGroupRule, Tag, TagSpecification, TransitGatewayAssociationState, TransitGatewayAttachmentResourceType, TransitGatewayAttachmentState, TransitGatewayPeeringAttachment, TransitGatewayVpcAttachment, TrunkInterfaceAssociation, UserIdGroupPair, VpcPeeringConnection } from "./models_0";
+import { AttributeValue, BlockDeviceMapping, FleetLaunchTemplateSpecification, FleetType, GroupIdentifier, InstanceInterruptionBehavior, InstanceIpv6Address, InstanceRequirements, Ipam, IpamScope, Ipv4PrefixSpecificationRequest, Ipv6PrefixSpecificationRequest, KeyType, LaunchTemplate, LaunchTemplateVersion, LocalGatewayRouteTable, LocalGatewayRouteTableVirtualInterfaceGroupAssociation, LocalGatewayRouteTableVpcAssociation, ManagedPrefixList, NatGateway, NetworkAcl, NetworkInsightsAccessScope, NetworkInsightsPath, NetworkInterface, NetworkInterfaceAttachment, NetworkInterfacePermission, PlacementGroup, PrivateIpAddressSpecification, ReplaceRootVolumeTask, RouteTable, Snapshot, SnapshotState, SpotDatafeedSubscription, SpotInstanceStateFault, SpotInstanceType, StorageTier, Subnet, TargetCapacityUnitType, Tenancy, VolumeType, Vpc } from "./models_1";
 import { ConnectionNotification, DnsEntry, DnsNameState, IpAddressType, PayerResponsibility, ServiceConfiguration, ServiceConnectivityType, ServiceTypeDetail, State, TrafficMirrorFilter, TrafficMirrorSession, TrafficMirrorTarget, TransitGateway, TransitGatewayConnect, TransitGatewayConnectPeer, TransitGatewayMulticastDomain, TransitGatewayPolicyTable, TransitGatewayRouteTable, TransitGatewayRouteTableAnnouncement, Volume, VpcEndpoint, VpnConnection, VpnGateway } from "./models_2";
-import { AttributeBooleanValue, EventInformation, FastLaunchLaunchTemplateSpecificationResponse, FastLaunchResourceType, FastLaunchSnapshotConfigurationResponse, FastLaunchStateCode, FastSnapshotRestoreStateCode, Filter, IdFormat, PermissionGroup, ProductCode } from "./models_3";
+import { AttributeBooleanValue, EventInformation, FastLaunchLaunchTemplateSpecificationResponse, FastLaunchResourceType, FastLaunchSnapshotConfigurationResponse, FastLaunchStateCode, FastSnapshotRestoreStateCode, Filter, IdFormat, MetricType, PermissionGroup, ProductCode, StatisticType } from "./models_3";
+export interface DescribeIpamsResult {
+    /**
+     * <p>The token to use to retrieve the next page of results. This value is <code>null</code> when there are no more results to return.</p>
+     */
+    NextToken?: string;
+    /**
+     * <p>Information about the IPAMs.</p>
+     */
+    Ipams?: Ipam[];
+}
+export interface DescribeIpamScopesRequest {
+    /**
+     * <p>A check for whether you have the required permissions for the action without actually making the request
+     *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
+     *    Otherwise, it is <code>UnauthorizedOperation</code>.</p>
+     */
+    DryRun?: boolean;
+    /**
+     * <p>One or more filters for the request. For more information about filtering, see <a href="https://docs.aws.amazon.com/cli/latest/userguide/cli-usage-filter.html">Filtering CLI output</a>.</p>
+     */
+    Filters?: Filter[];
+    /**
+     * <p>The maximum number of results to return in the request.</p>
+     */
+    MaxResults?: number;
+    /**
+     * <p>The token for the next page of results.</p>
+     */
+    NextToken?: string;
+    /**
+     * <p>The IDs of the scopes you want information on.</p>
+     */
+    IpamScopeIds?: string[];
+}
+export interface DescribeIpamScopesResult {
+    /**
+     * <p>The token to use to retrieve the next page of results. This value is <code>null</code> when there are no more results to return.</p>
+     */
+    NextToken?: string;
+    /**
+     * <p>The scopes you want information on.</p>
+     */
+    IpamScopes?: IpamScope[];
+}
+export interface DescribeIpv6PoolsRequest {
+    /**
+     * <p>The IDs of the IPv6 address pools.</p>
+     */
+    PoolIds?: string[];
+    /**
+     * <p>The token for the next page of results.</p>
+     */
+    NextToken?: string;
+    /**
+     * <p>The maximum number of results to return with a single call.
+     * 	To retrieve the remaining results, make another call with the returned <code>nextToken</code> value.</p>
+     */
+    MaxResults?: number;
+    /**
+     * <p>Checks whether you have the required permissions for the action, without actually making the request,
+     *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
+     *    Otherwise, it is <code>UnauthorizedOperation</code>.</p>
+     */
+    DryRun?: boolean;
+    /**
+     * <p>One or more filters.</p>
+     *         <ul>
+     *             <li>
+     *                 <p>
+     *                   <code>tag</code>:<key> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value.
+     *     For example, to find all resources that have a tag with the key <code>Owner</code> and the value <code>TeamA</code>, specify <code>tag:Owner</code> for the filter name and <code>TeamA</code> for the filter value.</p>
+     *             </li>
+     *             <li>
+     *                 <p>
+     *                   <code>tag-key</code> - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.</p>
+     *             </li>
+     *          </ul>
+     */
+    Filters?: Filter[];
+}
+/**
+ * <p>Describes a CIDR block for an address pool.</p>
+ */
+export interface PoolCidrBlock {
+    /**
+     * <p>The CIDR block.</p>
+     */
+    Cidr?: string;
+}
+/**
+ * <p>Describes an IPv6 address pool.</p>
+ */
+export interface Ipv6Pool {
+    /**
+     * <p>The ID of the address pool.</p>
+     */
+    PoolId?: string;
+    /**
+     * <p>The description for the address pool.</p>
+     */
+    Description?: string;
+    /**
+     * <p>The CIDR blocks for the address pool.</p>
+     */
+    PoolCidrBlocks?: PoolCidrBlock[];
+    /**
+     * <p>Any tags for the address pool.</p>
+     */
+    Tags?: Tag[];
+}
+export interface DescribeIpv6PoolsResult {
+    /**
+     * <p>Information about the IPv6 address pools.</p>
+     */
+    Ipv6Pools?: Ipv6Pool[];
+    /**
+     * <p>The token to use to retrieve the next page of results. This value is <code>null</code> when there are no more results to return.</p>
+     */
+    NextToken?: string;
+}
+export interface DescribeKeyPairsRequest {
+    /**
+     * <p>The filters.</p>
+     *          <ul>
+     *             <li>
+     *      		        <p>
+     *      			          <code>key-pair-id</code> - The ID of the key pair.</p>
+     *      	      </li>
+     *             <li>
+     *                <p>
+     *                   <code>fingerprint</code> - The fingerprint of the key pair.</p>
+     *             </li>
+     *             <li>
+     *                <p>
+     *                   <code>key-name</code> - The name of the key pair.</p>
+     *             </li>
+     *             <li>
+     *      		        <p>
+     *                   <code>tag-key</code> - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.</p>
+     *      	      </li>
+     *             <li>
+     *      		        <p>
+     *                   <code>tag</code>:<key> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value.
+     *     For example, to find all resources that have a tag with the key <code>Owner</code> and the value <code>TeamA</code>, specify <code>tag:Owner</code> for the filter name and <code>TeamA</code> for the filter value.</p>
+     *      	      </li>
+     *          </ul>
+     */
+    Filters?: Filter[];
+    /**
+     * <p>The key pair names.</p>
+     *          <p>Default: Describes all of your key pairs.</p>
+     */
+    KeyNames?: string[];
+    /**
+     * <p>The IDs of the key pairs.</p>
+     */
+    KeyPairIds?: string[];
+    /**
+     * <p>Checks whether you have the required permissions for the action, without actually making the request,
+     *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
+     *    Otherwise, it is <code>UnauthorizedOperation</code>.</p>
+     */
+    DryRun?: boolean;
+    /**
+     * <p>If <code>true</code>, the public key material is included in the response.</p>
+     *         <p>Default: <code>false</code>
+     *          </p>
+     */
+    IncludePublicKey?: boolean;
+}
+/**
+ * <p>Describes a key pair.</p>
+ */
+export interface KeyPairInfo {
+    /**
+     * <p>The ID of the key pair.</p>
+     */
+    KeyPairId?: string;
+    /**
+     * <p>If you used <a>CreateKeyPair</a> to create the key pair:</p>
+     *          <ul>
+     *             <li>
+     *                <p>For RSA key pairs, the key fingerprint is the SHA-1 digest of the DER encoded private key.</p>
+     *            </li>
+     *             <li>
+     *                <p>For ED25519 key pairs, the key fingerprint is the base64-encoded SHA-256 digest, which
+     *                    is the default for OpenSSH, starting with <a href="http://www.openssh.com/txt/release-6.8">OpenSSH 6.8</a>.</p>
+     *            </li>
+     *          </ul>
+     *          <p>If you used <a>ImportKeyPair</a> to provide Amazon Web Services the public key:</p>
+     *          <ul>
+     *             <li>
+     *                <p>For RSA key pairs, the key fingerprint is the MD5 public key fingerprint as specified in section 4 of RFC4716.</p>
+     *            </li>
+     *             <li>
+     *                <p>For ED25519 key pairs, the key fingerprint is the base64-encoded SHA-256
+     *                     digest, which is the default for OpenSSH, starting with <a href="http://www.openssh.com/txt/release-6.8">OpenSSH 6.8</a>.</p>
+     *            </li>
+     *          </ul>
+     */
+    KeyFingerprint?: string;
+    /**
+     * <p>The name of the key pair.</p>
+     */
+    KeyName?: string;
+    /**
+     * <p>The type of key pair.</p>
+     */
+    KeyType?: KeyType | string;
+    /**
+     * <p>Any tags applied to the key pair.</p>
+     */
+    Tags?: Tag[];
+    /**
+     * <p>The public key material.</p>
+     */
+    PublicKey?: string;
+    /**
+     * <p>If you used Amazon EC2 to create the key pair, this is the date and time when the key
+     *             was created, in <a href="https://www.iso.org/iso-8601-date-and-time-format.html">ISO
+     *                 8601 date-time format</a>, in the UTC time zone.</p>
+     *         <p>If you imported an existing key pair to Amazon EC2, this is the date and time the key
+     *             was imported, in <a href="https://www.iso.org/iso-8601-date-and-time-format.html">ISO
+     *                 8601 date-time format</a>, in the UTC time zone.</p>
+     */
+    CreateTime?: Date;
+}
+export interface DescribeKeyPairsResult {
+    /**
+     * <p>Information about the key pairs.</p>
+     */
+    KeyPairs?: KeyPairInfo[];
+}
 export interface DescribeLaunchTemplatesRequest {
     /**
      * <p>Checks whether you have the required permissions for the action, without actually
@@ -1163,6 +1396,7 @@ export interface NetworkInsightsAnalysis {
      * <p>The ID of the path.</p>
      */
     NetworkInsightsPathId?: string;
+    AdditionalAccounts?: string[];
     /**
      * <p>The Amazon Resource Names (ARN) of the Amazon Web Services resources that the path must traverse.</p>
      */
@@ -1203,6 +1437,7 @@ export interface NetworkInsightsAnalysis {
      * <p>Potential intermediate components.</p>
      */
     AlternatePathHints?: AlternatePathHint[];
+    SuggestedAccounts?: string[];
     /**
      * <p>The tags.</p>
      */
@@ -4364,28 +4599,48 @@ export interface SpotFleetRequestConfigData {
      * <p>The strategy that determines how to allocate the target Spot Instance capacity across the Spot Instance
      *             pools specified by the Spot Fleet launch configuration. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-fleet-allocation-strategy.html">Allocation
      *                 strategies for Spot Instances</a> in the <i>Amazon EC2 User Guide</i>.</p>
-     *         <p>
-     *             <code>lowestPrice</code> - Spot Fleet launches instances from the lowest-price Spot Instance pool
-     *             that has available capacity. If the cheapest pool doesn't have available capacity, the
-     *             Spot Instances come from the next cheapest pool that has available capacity. If a pool runs out
-     *             of capacity before fulfilling your desired capacity, Spot Fleet will continue to fulfill your
-     *             request by drawing from the next cheapest pool. To ensure that your desired capacity is
-     *             met, you might receive Spot Instances from several pools.</p>
-     *         <p>
-     *             <code>diversified</code> - Spot Fleet launches instances from all of the Spot Instance pools that you
-     *             specify.</p>
-     *         <p>
-     *             <code>capacityOptimized</code> (recommended) - Spot Fleet launches instances from Spot Instance pools
-     *             with optimal capacity for the number of instances that are launching. To give certain
-     *             instance types a higher chance of launching first, use
-     *             <code>capacityOptimizedPrioritized</code>. Set a priority for each instance type by
-     *             using the <code>Priority</code> parameter for <code>LaunchTemplateOverrides</code>. You can
-     *             assign the same priority to different <code>LaunchTemplateOverrides</code>. EC2 implements
-     *             the priorities on a best-effort basis, but optimizes for capacity first.
-     *             <code>capacityOptimizedPrioritized</code> is supported only if your Spot Fleet uses a
-     *             launch template. Note that if the <code>OnDemandAllocationStrategy</code> is set to
-     *             <code>prioritized</code>, the same priority is applied when fulfilling On-Demand
-     *             capacity.</p>
+     *
+     *          <dl>
+     *             <dt>priceCapacityOptimized (recommended)</dt>
+     *             <dd>
+     *                 <p>Spot Fleet identifies the pools with
+     *                    the highest capacity availability for the number of instances that are launching. This means
+     *                    that we will request Spot Instances from the pools that we believe have the lowest chance of interruption
+     *                    in the near term. Spot Fleet then requests Spot Instances from the lowest priced of these pools.</p>
+     *              </dd>
+     *             <dt>capacityOptimized</dt>
+     *             <dd>
+     *                 <p>Spot Fleet identifies the pools with
+     *                    the highest capacity availability for the number of instances that are launching. This means
+     *                    that we will request Spot Instances from the pools that we believe have the lowest chance of interruption
+     *                    in the near term. To give certain
+     *           instance types a higher chance of launching first, use
+     *           <code>capacityOptimizedPrioritized</code>. Set a priority for each instance type by
+     *           using the <code>Priority</code> parameter for <code>LaunchTemplateOverrides</code>. You can
+     *           assign the same priority to different <code>LaunchTemplateOverrides</code>. EC2 implements
+     *           the priorities on a best-effort basis, but optimizes for capacity first.
+     *           <code>capacityOptimizedPrioritized</code> is supported only if your Spot Fleet uses a
+     *           launch template. Note that if the <code>OnDemandAllocationStrategy</code> is set to
+     *           <code>prioritized</code>, the same priority is applied when fulfilling On-Demand
+     *           capacity.</p>
+     *              </dd>
+     *             <dt>diversified</dt>
+     *             <dd>
+     *                 <p>Spot Fleet requests instances from all of the Spot Instance pools that you
+     *           specify.</p>
+     *              </dd>
+     *             <dt>lowestPrice</dt>
+     *             <dd>
+     *                 <p>Spot Fleet requests instances from the lowest priced Spot Instance pool that
+     *           has available capacity. If the lowest priced pool doesn't have available capacity, the Spot Instances
+     *           come from the next lowest priced pool that has available capacity. If a pool runs out of
+     *           capacity before fulfilling your desired capacity, Spot Fleet will continue to fulfill your
+     *           request by drawing from the next lowest priced pool. To ensure that your desired capacity is
+     *           met, you might receive Spot Instances from several pools. Because this strategy only considers instance
+     *           price and not capacity availability, it might lead to high interruption rates.</p>
+     *              </dd>
+     *          </dl>
+     *
      *         <p>Default: <code>lowestPrice</code>
      *          </p>
      */
@@ -7374,15 +7629,23 @@ export interface DescribeVpcEndpointsRequest {
      *             </li>
      *             <li>
      *                 <p>
-     *                     <code>service-name</code> - The name of the service.</p>
+     *                   <code>service-name</code> - The name of the service.</p>
      *             </li>
      *             <li>
      *                 <p>
-     *                     <code>vpc-id</code> - The ID of the VPC in which the endpoint resides.</p>
+     *                   <code>tag</code>:<key> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key <code>Owner</code> and the value <code>TeamA</code>, specify <code>tag:Owner</code> for the filter name and <code>TeamA</code> for the filter value.</p>
      *             </li>
      *             <li>
      *                 <p>
-     *                     <code>vpc-endpoint-id</code> - The ID of the endpoint.</p>
+     *                   <code>tag-key</code> - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.</p>
+     *             </li>
+     *             <li>
+     *                 <p>
+     *                   <code>vpc-id</code> - The ID of the VPC in which the endpoint resides.</p>
+     *             </li>
+     *             <li>
+     *                 <p>
+     *                   <code>vpc-endpoint-id</code> - The ID of the endpoint.</p>
      *             </li>
      *             <li>
      *                 <p>
@@ -7395,14 +7658,6 @@ export interface DescribeVpcEndpointsRequest {
      *                 <p>
      *                   <code>vpc-endpoint-type</code> - The type of VPC endpoint (<code>Interface</code> | <code>Gateway</code> | <code>GatewayLoadBalancer</code>).</p>
      *             </li>
-     *             <li>
-     *         		     <p>
-     *                   <code>tag</code>:<key> - The key/value combination of a tag assigned to the resource. Use the tag key in the filter name and the tag value as the filter value. For example, to find all resources that have a tag with the key <code>Owner</code> and the value <code>TeamA</code>, specify <code>tag:Owner</code> for the filter name and <code>TeamA</code> for the filter value.</p>
-     *         	   </li>
-     *             <li>
-     *         		     <p>
-     *                   <code>tag-key</code> - The key of a tag assigned to the resource. Use this filter to find all resources assigned a tag with a specific key, regardless of the tag value.</p>
-     *         	   </li>
      *          </ul>
      */
     Filters?: Filter[];
@@ -7564,12 +7819,17 @@ export interface DescribeVpcEndpointServicesRequest {
      *         <ul>
      *             <li>
      *                 <p>
+     *                   <code>owner</code> - The ID or alias of the Amazon Web Services account that owns
+     *                     the service.</p>
+     *             </li>
+     *             <li>
+     *                 <p>
      *                   <code>service-name</code> - The name of the service.</p>
      *             </li>
      *             <li>
      *                 <p>
      *                   <code>service-type</code> - The type of service (<code>Interface</code> |
-     *                         <code>Gateway</code>).</p>
+     *                         <code>Gateway</code> | <code>GatewayLoadBalancer</code>).</p>
      *             </li>
      *             <li>
      *                 <p>
@@ -8203,6 +8463,36 @@ export interface DisableAddressTransferResult {
      */
     AddressTransfer?: AddressTransfer;
 }
+export interface DisableAwsNetworkPerformanceMetricSubscriptionRequest {
+    /**
+     * <p>The source Region or Availability Zone that the metric subscription is disabled for. For example, <code>us-east-1</code>.</p>
+     */
+    Source?: string;
+    /**
+     * <p>The target Region or Availability Zone that the metric subscription is disabled for. For example, <code>eu-north-1</code>.</p>
+     */
+    Destination?: string;
+    /**
+     * <p>The metric used for the disabled subscription.</p>
+     */
+    Metric?: MetricType | string;
+    /**
+     * <p>The statistic used for the disabled subscription. </p>
+     */
+    Statistic?: StatisticType | string;
+    /**
+     * <p>Checks whether you have the required permissions for the action, without actually making the request,
+     *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
+     *    Otherwise, it is <code>UnauthorizedOperation</code>.</p>
+     */
+    DryRun?: boolean;
+}
+export interface DisableAwsNetworkPerformanceMetricSubscriptionResult {
+    /**
+     * <p>Indicates whether the unsubscribe action was successful.</p>
+     */
+    Output?: boolean;
+}
 export interface DisableEbsEncryptionByDefaultRequest {
     /**
      * <p>Checks whether you have the required permissions for the action, without actually making the request,
@@ -8627,144 +8917,46 @@ export interface DisassociateIamInstanceProfileRequest {
      */
     AssociationId: string | undefined;
 }
-export interface DisassociateIamInstanceProfileResult {
-    /**
-     * <p>Information about the IAM instance profile association.</p>
-     */
-    IamInstanceProfileAssociation?: IamInstanceProfileAssociation;
-}
 /**
- * <p>The targets to disassociate from the specified event window.</p>
+ * @internal
  */
-export interface InstanceEventWindowDisassociationRequest {
-    /**
-     * <p>The IDs of the instances to disassociate from the event window.</p>
-     */
-    InstanceIds?: string[];
-    /**
-     * <p>The instance tags to disassociate from the event window. Any instances associated with
-     *          the tags will be disassociated from the event window.</p>
-     */
-    InstanceTags?: Tag[];
-    /**
-     * <p>The IDs of the Dedicated Hosts to disassociate from the event window.</p>
-     */
-    DedicatedHostIds?: string[];
-}
-export interface DisassociateInstanceEventWindowRequest {
-    /**
-     * <p>Checks whether you have the required permissions for the action, without actually making the request,
-     *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
-     *    Otherwise, it is <code>UnauthorizedOperation</code>.</p>
-     */
-    DryRun?: boolean;
-    /**
-     * <p>The ID of the event window.</p>
-     */
-    InstanceEventWindowId: string | undefined;
-    /**
-     * <p>One or more targets to disassociate from the specified event window.</p>
-     */
-    AssociationTarget: InstanceEventWindowDisassociationRequest | undefined;
-}
-export interface DisassociateInstanceEventWindowResult {
-    /**
-     * <p>Information about the event window.</p>
-     */
-    InstanceEventWindow?: InstanceEventWindow;
-}
-export interface DisassociateRouteTableRequest {
-    /**
-     * <p>The association ID representing the current association between the route table and subnet or gateway.</p>
-     */
-    AssociationId: string | undefined;
-    /**
-     * <p>Checks whether you have the required permissions for the action, without actually making the request,
-     *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
-     *    Otherwise, it is <code>UnauthorizedOperation</code>.</p>
-     */
-    DryRun?: boolean;
-}
-export interface DisassociateSubnetCidrBlockRequest {
-    /**
-     * <p>The association ID for the CIDR block.</p>
-     */
-    AssociationId: string | undefined;
-}
-export interface DisassociateSubnetCidrBlockResult {
-    /**
-     * <p>Information about the IPv6 CIDR block association.</p>
-     */
-    Ipv6CidrBlockAssociation?: SubnetIpv6CidrBlockAssociation;
-    /**
-     * <p>The ID of the subnet.</p>
-     */
-    SubnetId?: string;
-}
-export interface DisassociateTransitGatewayMulticastDomainRequest {
-    /**
-     * <p>The ID of the transit gateway multicast domain.</p>
-     */
-    TransitGatewayMulticastDomainId?: string;
-    /**
-     * <p>The ID of the attachment.</p>
-     */
-    TransitGatewayAttachmentId?: string;
-    /**
-     * <p>The IDs of the subnets;</p>
-     */
-    SubnetIds?: string[];
-    /**
-     * <p>Checks whether you have the required permissions for the action, without actually making the request,
-     *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
-     *    Otherwise, it is <code>UnauthorizedOperation</code>.</p>
-     */
-    DryRun?: boolean;
-}
-export interface DisassociateTransitGatewayMulticastDomainResult {
-    /**
-     * <p>Information about the association.</p>
-     */
-    Associations?: TransitGatewayMulticastDomainAssociations;
-}
-export interface DisassociateTransitGatewayPolicyTableRequest {
-    /**
-     * <p>The ID of the disassociated policy table.</p>
-     */
-    TransitGatewayPolicyTableId: string | undefined;
-    /**
-     * <p>The ID of the transit gateway attachment to disassociate from the policy table.</p>
-     */
-    TransitGatewayAttachmentId: string | undefined;
-    /**
-     * <p>Checks whether you have the required permissions for the action, without actually making the request,
-     *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
-     *    Otherwise, it is <code>UnauthorizedOperation</code>.</p>
-     */
-    DryRun?: boolean;
-}
-export interface DisassociateTransitGatewayPolicyTableResult {
-    /**
-     * <p>Returns details about the transit gateway policy table disassociation.</p>
-     */
-    Association?: TransitGatewayPolicyTableAssociation;
-}
-export interface DisassociateTransitGatewayRouteTableRequest {
-    /**
-     * <p>The ID of the transit gateway route table.</p>
-     */
-    TransitGatewayRouteTableId: string | undefined;
-    /**
-     * <p>The ID of the attachment.</p>
-     */
-    TransitGatewayAttachmentId: string | undefined;
-    /**
-     * <p>Checks whether you have the required permissions for the action, without actually making the request,
-     *    and provides an error response. If you have the required permissions, the error response is <code>DryRunOperation</code>.
-     *    Otherwise, it is <code>UnauthorizedOperation</code>.</p>
-     */
-    DryRun?: boolean;
-}
+export declare const DescribeIpamsResultFilterSensitiveLog: (obj: DescribeIpamsResult) => any;
+/**
+ * @internal
+ */
+export declare const DescribeIpamScopesRequestFilterSensitiveLog: (obj: DescribeIpamScopesRequest) => any;
+/**
+ * @internal
+ */
+export declare const DescribeIpamScopesResultFilterSensitiveLog: (obj: DescribeIpamScopesResult) => any;
+/**
+ * @internal
+ */
+export declare const DescribeIpv6PoolsRequestFilterSensitiveLog: (obj: DescribeIpv6PoolsRequest) => any;
+/**
+ * @internal
+ */
+export declare const PoolCidrBlockFilterSensitiveLog: (obj: PoolCidrBlock) => any;
+/**
+ * @internal
+ */
+export declare const Ipv6PoolFilterSensitiveLog: (obj: Ipv6Pool) => any;
+/**
+ * @internal
+ */
+export declare const DescribeIpv6PoolsResultFilterSensitiveLog: (obj: DescribeIpv6PoolsResult) => any;
+/**
+ * @internal
+ */
+export declare const DescribeKeyPairsRequestFilterSensitiveLog: (obj: DescribeKeyPairsRequest) => any;
+/**
+ * @internal
+ */
+export declare const KeyPairInfoFilterSensitiveLog: (obj: KeyPairInfo) => any;
+/**
+ * @internal
+ */
+export declare const DescribeKeyPairsResultFilterSensitiveLog: (obj: DescribeKeyPairsResult) => any;
 /**
  * @internal
  */
@@ -9705,6 +9897,14 @@ export declare const DisableAddressTransferRequestFilterSensitiveLog: (obj: Disa
  * @internal
  */
 export declare const DisableAddressTransferResultFilterSensitiveLog: (obj: DisableAddressTransferResult) => any;
+/**
+ * @internal
+ */
+export declare const DisableAwsNetworkPerformanceMetricSubscriptionRequestFilterSensitiveLog: (obj: DisableAwsNetworkPerformanceMetricSubscriptionRequest) => any;
+/**
+ * @internal
+ */
+export declare const DisableAwsNetworkPerformanceMetricSubscriptionResultFilterSensitiveLog: (obj: DisableAwsNetworkPerformanceMetricSubscriptionResult) => any;
 /**
  * @internal
  */
@@ -9825,51 +10025,3 @@ export declare const DisassociateEnclaveCertificateIamRoleResultFilterSensitiveL
  * @internal
  */
 export declare const DisassociateIamInstanceProfileRequestFilterSensitiveLog: (obj: DisassociateIamInstanceProfileRequest) => any;
-/**
- * @internal
- */
-export declare const DisassociateIamInstanceProfileResultFilterSensitiveLog: (obj: DisassociateIamInstanceProfileResult) => any;
-/**
- * @internal
- */
-export declare const InstanceEventWindowDisassociationRequestFilterSensitiveLog: (obj: InstanceEventWindowDisassociationRequest) => any;
-/**
- * @internal
- */
-export declare const DisassociateInstanceEventWindowRequestFilterSensitiveLog: (obj: DisassociateInstanceEventWindowRequest) => any;
-/**
- * @internal
- */
-export declare const DisassociateInstanceEventWindowResultFilterSensitiveLog: (obj: DisassociateInstanceEventWindowResult) => any;
-/**
- * @internal
- */
-export declare const DisassociateRouteTableRequestFilterSensitiveLog: (obj: DisassociateRouteTableRequest) => any;
-/**
- * @internal
- */
-export declare const DisassociateSubnetCidrBlockRequestFilterSensitiveLog: (obj: DisassociateSubnetCidrBlockRequest) => any;
-/**
- * @internal
- */
-export declare const DisassociateSubnetCidrBlockResultFilterSensitiveLog: (obj: DisassociateSubnetCidrBlockResult) => any;
-/**
- * @internal
- */
-export declare const DisassociateTransitGatewayMulticastDomainRequestFilterSensitiveLog: (obj: DisassociateTransitGatewayMulticastDomainRequest) => any;
-/**
- * @internal
- */
-export declare const DisassociateTransitGatewayMulticastDomainResultFilterSensitiveLog: (obj: DisassociateTransitGatewayMulticastDomainResult) => any;
-/**
- * @internal
- */
-export declare const DisassociateTransitGatewayPolicyTableRequestFilterSensitiveLog: (obj: DisassociateTransitGatewayPolicyTableRequest) => any;
-/**
- * @internal
- */
-export declare const DisassociateTransitGatewayPolicyTableResultFilterSensitiveLog: (obj: DisassociateTransitGatewayPolicyTableResult) => any;
-/**
- * @internal
- */
-export declare const DisassociateTransitGatewayRouteTableRequestFilterSensitiveLog: (obj: DisassociateTransitGatewayRouteTableRequest) => any;