@aws-sdk/client-ec2 3.1114.0 → 3.1115.0

package/dist-cjs/index.js

@@ -70,7 +70,7 @@ const commonParams = {
     UseDualStack: { type: "builtInParams", name: "useDualstackEndpoint" },
 };
 
-var version = "3.1113.0";
+var version = "3.1114.0";
 var packageInfo = {
 	version: version};
 
@@ -3804,6 +3804,7 @@ const _ITnstan = "InstanceTag";
 const _ITnstanc = "InstanceTopology";
 const _ITnt = "InterfaceType";
 const _IU = "InstanceUsages";
+const _IUDR = "ImageUefiDataRequest";
 const _IUIR = "IncludeUnsupportedInRegion";
 const _IUR = "ImageUsageReports";
 const _IURE = "ImageUsageReportEntries";
@@ -5774,7 +5775,7 @@ const _SRou = "SourceResource";
 const _SRt = "StateReason";
 const _SRu = "SupportedRegions";
 const _SRup = "SupportedRegion";
-const _SS = "StatusSince";
+const _SS = "SensitiveString";
 const _SSA = "SecondarySubnetArn";
 const _SSC = "SqlServerCredentials";
 const _SSG = "StaleSecurityGroup";
@@ -5806,7 +5807,8 @@ const _SSec = "SecondarySubnets";
 const _SSer = "ServiceState";
 const _SSn = "SnapshotSet";
 const _SSs = "SseSpecification";
-const _SSt = "S3Storage";
+const _SSt = "StatusSince";
+const _SSto = "S3Storage";
 const _SSu = "SupportedStrategies";
 const _SSy = "SystemStatus";
 const _ST = "SuccessThreshold";
@@ -8687,6 +8689,7 @@ var ClientSecretType = [0, n0, _CST, 8, 0];
 var CopySnapshotRequestPSU = [0, n0, _CSRPSU, 8, 0];
 var customerGatewayConfiguration = [0, n0, _cGC, 8, 0];
 var EkPubKeyValue = [0, n0, _EPKV, 8, 0];
+var ImageUefiDataRequest = [0, n0, _IUDR, 8, 0];
 var ImportManifestUrl = [0, n0, _IMU, 8, 0];
 var ModifyInstanceAttributeValue = [0, n0, _MIAV, 8, 0];
 var PasswordData = [0, n0, _PD, 8, 0];
@@ -8695,6 +8698,7 @@ var ReportInstanceStatusRequestDescription = [0, n0, _RISRD, 8, 0];
 var RunInstancesUserData = [0, n0, _RIUD, 8, 0];
 var S3StorageUploadPolicySignature = [0, n0, _SSUPS, 8, 0];
 var SensitiveMacCredentials = [0, n0, _SMC, 8, 0];
+var SensitiveString = [0, n0, _SS, 8, 0];
 var SensitiveUrl = [0, n0, _SU, 8, 0];
 var SensitiveUserData = [0, n0, _SUD, 8, 0];
 var VpnConnectionDeviceSampleConfiguration = [0, n0, _VCDSC, 8, 0];
@@ -9134,7 +9138,7 @@ var AnalysisSecurityGroupRule$ = [3, n0, _ASGR,
 ];
 var ApplicationStatus$ = [3, n0, _AS,
     0,
-    [_Sta, _STS, _SS, _RAe, _Det],
+    [_Sta, _STS, _SSt, _RAe, _Det],
     [[0, { [_eQN]: `Status`,
                 [_xN]: _sta }], [4, { [_eQN]: `StatusTimeStamp`,
                 [_xN]: _sTS }], [4, { [_eQN]: `StatusSince`,
@@ -9179,7 +9183,7 @@ var ApplicationStatusCheckResponseObject$ = [3, n0, _ASCRO,
 ];
 var ApplicationStatusDetail$ = [3, n0, _ASD,
     0,
-    [_ASCI, _CUT, _Ag, _Sta, _STS, _SS, _Re],
+    [_ASCI, _CUT, _Ag, _Sta, _STS, _SSt, _Re],
     [[0, { [_eQN]: `ApplicationStatusCheckId`,
                 [_xN]: _aSCI }], [4, { [_eQN]: `CheckUpdateTime`,
                 [_xN]: _cUT }], [0, { [_eQN]: `Aggregation`,
@@ -17925,7 +17929,7 @@ var GetInstanceUefiDataResult$ = [3, n0, _GIUDRe,
     0,
     [_II, _UD],
     [[0, { [_eQN]: `InstanceId`,
-                [_xN]: _iI }], [0, { [_eQN]: `UefiData`,
+                [_xN]: _iI }], [() => SensitiveString, { [_eQN]: `UefiData`,
                 [_xN]: _uD }]]
 ];
 var GetIpamAddressHistoryRequest$ = [3, n0, _GIAHR,
@@ -23332,7 +23336,7 @@ var RegisterImageRequest$ = [3, n0, _RIRe,
     0,
     [_N, _IL, _BPi, _BM, _TSp, _UD, _ISmd, _TS, _DR, _De, _Arc, _KI, _RIa, _RDN, _BDMl, _VTir, _SNS, _ESna],
     [[0, { [_eQN]: `Name`,
-                [_xN]: _n }], 0, [() => BillingProductList, { [_xN]: _BPil }], 0, 0, 0, 0, [() => TagSpecificationList, { [_xN]: _TSa }], [2, { [_eQN]: `DryRun`,
+                [_xN]: _n }], 0, [() => BillingProductList, { [_xN]: _BPil }], 0, 0, [() => ImageUefiDataRequest, 0], 0, [() => TagSpecificationList, { [_xN]: _TSa }], [2, { [_eQN]: `DryRun`,
                 [_xN]: _dR }], [0, { [_eQN]: `Description`,
                 [_xN]: _de }], [0, { [_eQN]: `Architecture`,
                 [_xN]: _arc }], [0, { [_eQN]: `KernelId`,
@@ -24344,7 +24348,7 @@ var S3ObjectTag$ = [3, n0, _SOTb,
     [_K, _V],
     [0, 0]
 ];
-var S3Storage$ = [3, n0, _SSt,
+var S3Storage$ = [3, n0, _SSto,
     0,
     [_AWSAKI, _Bu, _Pre, _UPp, _UPS],
     [0, [0, { [_eQN]: `Bucket`,

package/dist-es/schemas/schemas_0.js

@@ -3660,6 +3660,7 @@ const _ITnstan = "InstanceTag";
 const _ITnstanc = "InstanceTopology";
 const _ITnt = "InterfaceType";
 const _IU = "InstanceUsages";
+const _IUDR = "ImageUefiDataRequest";
 const _IUIR = "IncludeUnsupportedInRegion";
 const _IUR = "ImageUsageReports";
 const _IURE = "ImageUsageReportEntries";
@@ -5630,7 +5631,7 @@ const _SRou = "SourceResource";
 const _SRt = "StateReason";
 const _SRu = "SupportedRegions";
 const _SRup = "SupportedRegion";
-const _SS = "StatusSince";
+const _SS = "SensitiveString";
 const _SSA = "SecondarySubnetArn";
 const _SSC = "SqlServerCredentials";
 const _SSG = "StaleSecurityGroup";
@@ -5662,7 +5663,8 @@ const _SSec = "SecondarySubnets";
 const _SSer = "ServiceState";
 const _SSn = "SnapshotSet";
 const _SSs = "SseSpecification";
-const _SSt = "S3Storage";
+const _SSt = "StatusSince";
+const _SSto = "S3Storage";
 const _SSu = "SupportedStrategies";
 const _SSy = "SystemStatus";
 const _ST = "SuccessThreshold";
@@ -8545,6 +8547,7 @@ var ClientSecretType = [0, n0, _CST, 8, 0];
 var CopySnapshotRequestPSU = [0, n0, _CSRPSU, 8, 0];
 var customerGatewayConfiguration = [0, n0, _cGC, 8, 0];
 var EkPubKeyValue = [0, n0, _EPKV, 8, 0];
+var ImageUefiDataRequest = [0, n0, _IUDR, 8, 0];
 var ImportManifestUrl = [0, n0, _IMU, 8, 0];
 var ModifyInstanceAttributeValue = [0, n0, _MIAV, 8, 0];
 var PasswordData = [0, n0, _PD, 8, 0];
@@ -8553,6 +8556,7 @@ var ReportInstanceStatusRequestDescription = [0, n0, _RISRD, 8, 0];
 var RunInstancesUserData = [0, n0, _RIUD, 8, 0];
 var S3StorageUploadPolicySignature = [0, n0, _SSUPS, 8, 0];
 var SensitiveMacCredentials = [0, n0, _SMC, 8, 0];
+var SensitiveString = [0, n0, _SS, 8, 0];
 var SensitiveUrl = [0, n0, _SU, 8, 0];
 var SensitiveUserData = [0, n0, _SUD, 8, 0];
 var VpnConnectionDeviceSampleConfiguration = [0, n0, _VCDSC, 8, 0];
@@ -8992,7 +8996,7 @@ export var AnalysisSecurityGroupRule$ = [3, n0, _ASGR,
 ];
 export var ApplicationStatus$ = [3, n0, _AS,
     0,
-    [_Sta, _STS, _SS, _RAe, _Det],
+    [_Sta, _STS, _SSt, _RAe, _Det],
     [[0, { [_eQN]: `Status`,
                 [_xN]: _sta }], [4, { [_eQN]: `StatusTimeStamp`,
                 [_xN]: _sTS }], [4, { [_eQN]: `StatusSince`,
@@ -9037,7 +9041,7 @@ export var ApplicationStatusCheckResponseObject$ = [3, n0, _ASCRO,
 ];
 export var ApplicationStatusDetail$ = [3, n0, _ASD,
     0,
-    [_ASCI, _CUT, _Ag, _Sta, _STS, _SS, _Re],
+    [_ASCI, _CUT, _Ag, _Sta, _STS, _SSt, _Re],
     [[0, { [_eQN]: `ApplicationStatusCheckId`,
                 [_xN]: _aSCI }], [4, { [_eQN]: `CheckUpdateTime`,
                 [_xN]: _cUT }], [0, { [_eQN]: `Aggregation`,
@@ -17783,7 +17787,7 @@ export var GetInstanceUefiDataResult$ = [3, n0, _GIUDRe,
     0,
     [_II, _UD],
     [[0, { [_eQN]: `InstanceId`,
-                [_xN]: _iI }], [0, { [_eQN]: `UefiData`,
+                [_xN]: _iI }], [() => SensitiveString, { [_eQN]: `UefiData`,
                 [_xN]: _uD }]]
 ];
 export var GetIpamAddressHistoryRequest$ = [3, n0, _GIAHR,
@@ -23190,7 +23194,7 @@ export var RegisterImageRequest$ = [3, n0, _RIRe,
     0,
     [_N, _IL, _BPi, _BM, _TSp, _UD, _ISmd, _TS, _DR, _De, _Arc, _KI, _RIa, _RDN, _BDMl, _VTir, _SNS, _ESna],
     [[0, { [_eQN]: `Name`,
-                [_xN]: _n }], 0, [() => BillingProductList, { [_xN]: _BPil }], 0, 0, 0, 0, [() => TagSpecificationList, { [_xN]: _TSa }], [2, { [_eQN]: `DryRun`,
+                [_xN]: _n }], 0, [() => BillingProductList, { [_xN]: _BPil }], 0, 0, [() => ImageUefiDataRequest, 0], 0, [() => TagSpecificationList, { [_xN]: _TSa }], [2, { [_eQN]: `DryRun`,
                 [_xN]: _dR }], [0, { [_eQN]: `Description`,
                 [_xN]: _de }], [0, { [_eQN]: `Architecture`,
                 [_xN]: _arc }], [0, { [_eQN]: `KernelId`,
@@ -24202,7 +24206,7 @@ export var S3ObjectTag$ = [3, n0, _SOTb,
     [_K, _V],
     [0, 0]
 ];
-export var S3Storage$ = [3, n0, _SSt,
+export var S3Storage$ = [3, n0, _SSto,
     0,
     [_AWSAKI, _Bu, _Pre, _UPp, _UPS],
     [0, [0, { [_eQN]: `Bucket`,

package/dist-types/commands/AssociateApplicationStatusCheckCommand.d.ts

@@ -30,19 +30,19 @@ declare const AssociateApplicationStatusCheckCommand_base: {
  *                <p>You must specify either <code>TargetTagAssociations</code> or <code>InstanceIds</code>, but not both. Specifying both results in an <code>InvalidParameterCombination</code> error.</p>
  *             </li>
  *             <li>
- *                <p>The application status check must already exist and belong to your account.</p>
+ *                <p>You must own the application status check. The check must already exist in your account.</p>
  *             </li>
  *             <li>
- *                <p>Tag keys must not be blank.</p>
+ *                <p>You must not leave tag keys blank.</p>
  *             </li>
  *             <li>
- *                <p>Maximum 50 tag associations per application status check.</p>
+ *                <p>You can create a maximum of 50 tag associations for each application status check.</p>
  *             </li>
  *             <li>
- *                <p>Use <code>DisassociateApplicationStatusCheck</code> to remove associations.</p>
+ *                <p>You can use <code>DisassociateApplicationStatusCheck</code> to remove associations.</p>
  *             </li>
  *             <li>
- *                <p>When you associate <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html">tags</a>, the application status check automatically monitors all current and future instances that have the specified tags.</p>
+ *                <p>You can associate <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html">tags</a> so that the application status check automatically monitors all current and future instances that have the specified tags.</p>
  *             </li>
  *          </ul>
  * @example

package/dist-types/commands/CreateApplicationStatusCheckCommand.d.ts

@@ -27,22 +27,22 @@ declare const CreateApplicationStatusCheckCommand_base: {
  * <p>Creates an application status check for monitoring the health of applications running on your instances. You can configure the protocol, port, path, and thresholds for the health check. The following rules apply:</p>
  *          <ul>
  *             <li>
- *                <p>You can create a maximum of 50 application status checks per account.</p>
+ *                <p>You can create a maximum of 50 application status checks for each account.</p>
  *             </li>
  *             <li>
- *                <p>Health checks do not start until you associate the check with instances or tags using <code>AssociateApplicationStatusCheck</code>.</p>
+ *                <p>You must associate the check with instances or tags using <code>AssociateApplicationStatusCheck</code> before health checks start.</p>
  *             </li>
  *             <li>
- *                <p>The <code>Timeout</code> value must be less than the <code>Interval</code> value.</p>
+ *                <p>You must set the <code>Timeout</code> value to less than the <code>Interval</code> value.</p>
  *             </li>
  *             <li>
- *                <p>The <code>Path</code> must start with a forward slash (<code>/</code>). Default: <code>/</code>.</p>
+ *                <p>You must start the <code>Path</code> with a forward slash (<code>/</code>). Default: <code>/</code>.</p>
  *             </li>
  *             <li>
- *                <p>If you do not specify <code>Aggregation</code>, it defaults to <code>included</code>, which means the check contributes to the instance-level application status.</p>
+ *                <p>You can specify <code>Aggregation</code> as <code>included</code> or <code>excluded</code>. If you do not specify a value, it defaults to <code>included</code>, which means the check contributes to the instance-level application status.</p>
  *             </li>
  *             <li>
- *                <p>Default values: <code>Interval</code> is 60 seconds, <code>Timeout</code> is 6 seconds, <code>FailureThreshold</code> is 2, <code>SuccessThreshold</code> is 2, <code>StatusCodeMatcher</code> is <code>200</code>, <code>InitializationGracePeriodSeconds</code> is 300 seconds.</p>
+ *                <p>You can use the following default values: <code>Interval</code> is 60 seconds, <code>Timeout</code> is 6 seconds, <code>FailureThreshold</code> is 2, <code>SuccessThreshold</code> is 2, <code>StatusCodeMatcher</code> is <code>200</code>, <code>InitializationGracePeriodSeconds</code> is 300 seconds.</p>
  *             </li>
  *             <li>
  *                <p>You can tag the application status check during creation. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Using_Tags.html">Tag your Amazon EC2 resources</a>.</p>

package/dist-types/commands/DescribeApplicationStatusChecksCommand.d.ts

@@ -24,7 +24,7 @@ declare const DescribeApplicationStatusChecksCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/types").EndpointParameterInstructions;
 };
 /**
- * <p>Describes one or more application status checks. Returns configuration details for your application status checks, including protocol, port, path, thresholds, and associations. The following rules apply:</p>
+ * <p>Describes application status checks, including configuration details such as protocol, port, path, thresholds, and associations. Results are paginated. Use the <code>NextToken</code> parameter to retrieve additional results. The following rules apply:</p>
  *          <ul>
  *             <li>
  *                <p>If you do not specify any application status check IDs, all checks in your account are returned.</p>

package/dist-types/commands/DescribeApplicationStatusCommand.d.ts

@@ -24,7 +24,7 @@ declare const DescribeApplicationStatusCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/types").EndpointParameterInstructions;
 };
 /**
- * <p>Describes the application status for the specified instances. Returns the aggregated application health status for each instance. The following rules apply:</p>
+ * <p>Describes the aggregated application health status for the specified instances. The following rules apply:</p>
  *          <ul>
  *             <li>
  *                <p>The instance-level status is derived from all application status checks with the aggregation setting set to <code>included</code>.</p>

package/dist-types/commands/DisableApplicationStatusCheckSuppressionCommand.d.ts

@@ -24,7 +24,7 @@ declare const DisableApplicationStatusCheckSuppressionCommand_base: {
     getEndpointParameterInstructions(): import("@smithy/types").EndpointParameterInstructions;
 };
 /**
- * <p>Disables suppression of application status checks for the specified instances. After suppression is disabled, health check results resume affecting the instance-level application status. You can specify a maximum of 100 instance IDs per request.</p>
+ * <p>Disables suppression of application status checks for the specified instances. After suppression is disabled, health check results resume affecting the instance-level application status. You can specify a maximum of 100 instance IDs for each request.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/EnableApplicationStatusCheckSuppressionCommand.d.ts

@@ -27,7 +27,7 @@ declare const EnableApplicationStatusCheckSuppressionCommand_base: {
  * <p>Suppresses application status checks for the specified instances. While suppressed, health checks continue to run but do not affect the instance-level application status. The following rules apply:</p>
  *          <ul>
  *             <li>
- *                <p>Maximum 100 instance IDs per request.</p>
+ *                <p>You can specify a maximum of 100 instance IDs for each request.</p>
  *             </li>
  *             <li>
  *                <p>Use <code>DisableApplicationStatusCheckSuppression</code> to resume normal health check reporting.</p>

package/dist-types/models/models_0.d.ts

@@ -3436,7 +3436,7 @@ export interface AssociateApplicationStatusCheckRequest {
      */
     InstanceIds?: string[] | undefined;
     /**
-     * <p>Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a>.</p>
+     * <p>A unique, case-sensitive identifier that you provide to ensure that the operation completes no more than one time. If you retry a request with the same token, the service ignores the request but does not return an error. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a>.</p>
      * @public
      */
     ClientToken?: string | undefined;
@@ -7565,7 +7565,7 @@ export interface CreateApplicationStatusCheckRequest {
      */
     TagSpecifications?: TagSpecification[] | undefined;
     /**
-     * <p>Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a>.</p>
+     * <p>A unique, case-sensitive identifier that you provide to ensure that the operation completes no more than one time. If you retry a request with the same token, the service ignores the request but does not return an error. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a>.</p>
      * @public
      */
     ClientToken?: string | undefined;

package/dist-types/models/models_2.d.ts

@@ -7950,7 +7950,7 @@ export interface DeleteApplicationStatusCheckRequest {
      */
     ApplicationStatusCheckId: string | undefined;
     /**
-     * <p>Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a>.</p>
+     * <p>A unique, case-sensitive identifier that you provide to ensure that the operation completes no more than one time. If you retry a request with the same token, the service ignores the request but does not return an error. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a>.</p>
      * @public
      */
     ClientToken?: string | undefined;

package/dist-types/models/models_5.d.ts

@@ -8023,7 +8023,7 @@ export interface DisableApplicationStatusCheckSuppressionRequest {
      */
     InstanceIds?: string[] | undefined;
     /**
-     * <p>Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a>.</p>
+     * <p>A unique, case-sensitive identifier that you provide to ensure that the operation completes no more than one time. If you retry a request with the same token, the service ignores the request but does not return an error. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a>.</p>
      * @public
      */
     ClientToken?: string | undefined;
@@ -8930,7 +8930,7 @@ export interface DisassociateApplicationStatusCheckRequest {
      */
     InstanceIds?: string[] | undefined;
     /**
-     * <p>Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a>.</p>
+     * <p>A unique, case-sensitive identifier that you provide to ensure that the operation completes no more than one time. If you retry a request with the same token, the service ignores the request but does not return an error. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a>.</p>
      * @public
      */
     ClientToken?: string | undefined;
@@ -9582,7 +9582,7 @@ export interface EnableApplicationStatusCheckSuppressionRequest {
      */
     DurationSeconds?: number | undefined;
     /**
-     * <p>Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a>.</p>
+     * <p>A unique, case-sensitive identifier that you provide to ensure that the operation completes no more than one time. If you retry a request with the same token, the service ignores the request but does not return an error. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a>.</p>
      * @public
      */
     ClientToken?: string | undefined;

package/dist-types/models/models_7.d.ts

@@ -679,7 +679,7 @@ export interface ModifyApplicationStatusCheckRequest {
      */
     InitializationGracePeriodSeconds?: number | undefined;
     /**
-     * <p>Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a>.</p>
+     * <p>A unique, case-sensitive identifier that you provide to ensure that the operation completes no more than one time. If you retry a request with the same token, the service ignores the request but does not return an error. For more information, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/APIReference/Run_Instance_Idempotency.html">Ensuring idempotency</a>.</p>
      * @public
      */
     ClientToken?: string | undefined;

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@aws-sdk/client-ec2",
-  "version": "3.1114.0",
+  "version": "3.1115.0",
   "description": "AWS SDK for JavaScript Ec2 Client for Node.js, Browser and React Native",
   "homepage": "https://github.com/aws/aws-sdk-js-v3/tree/main/clients/client-ec2",
   "license": "Apache-2.0",