@aws-sdk/client-dynamodb 3.427.0 → 3.429.0

package/dist-types/models/models_0.d.ts

@@ -87,7 +87,7 @@ export interface AttributeDefinition {
      *             </li>
      *          </ul>
      */
-    AttributeType: ScalarAttributeType | string | undefined;
+    AttributeType: ScalarAttributeType | undefined;
 }
 /**
  * @public
@@ -320,7 +320,7 @@ export interface BackupDetails {
      * @public
      * <p>Backup can be in one of the following states: CREATING, ACTIVE, DELETED. </p>
      */
-    BackupStatus: BackupStatus | string | undefined;
+    BackupStatus: BackupStatus | undefined;
     /**
      * @public
      * <p>BackupType:</p>
@@ -343,7 +343,7 @@ export interface BackupDetails {
      *             </li>
      *          </ul>
      */
-    BackupType: BackupType | string | undefined;
+    BackupType: BackupType | undefined;
     /**
      * @public
      * <p>Time at which the backup was created. This is the request time of the backup. </p>
@@ -424,7 +424,7 @@ export interface KeySchemaElement {
      *                 value.</p>
      *          </note>
      */
-    KeyType: KeyType | string | undefined;
+    KeyType: KeyType | undefined;
 }
 /**
  * @public
@@ -518,7 +518,7 @@ export interface SourceTableDetails {
      *             </li>
      *          </ul>
      */
-    BillingMode?: BillingMode | string;
+    BillingMode?: BillingMode;
 }
 /**
  * @public
@@ -562,7 +562,7 @@ export interface Projection {
      *             </li>
      *          </ul>
      */
-    ProjectionType?: ProjectionType | string;
+    ProjectionType?: ProjectionType;
     /**
      * @public
      * <p>Represents the non-key attribute names which will be projected into the index.</p>
@@ -715,7 +715,7 @@ export interface SSEDescription {
      *             </li>
      *          </ul>
      */
-    Status?: SSEStatus | string;
+    Status?: SSEStatus;
     /**
      * @public
      * <p>Server-side encryption type. The only supported value is:</p>
@@ -727,7 +727,7 @@ export interface SSEDescription {
      *             </li>
      *          </ul>
      */
-    SSEType?: SSEType | string;
+    SSEType?: SSEType;
     /**
      * @public
      * <p>The KMS key ARN used for the KMS encryption.</p>
@@ -795,7 +795,7 @@ export interface StreamSpecification {
      *             </li>
      *          </ul>
      */
-    StreamViewType?: StreamViewType | string;
+    StreamViewType?: StreamViewType;
 }
 /**
  * @public
@@ -820,7 +820,7 @@ export interface TimeToLiveDescription {
      * @public
      * <p> The TTL status for the table.</p>
      */
-    TimeToLiveStatus?: TimeToLiveStatus | string;
+    TimeToLiveStatus?: TimeToLiveStatus;
     /**
      * @public
      * <p> The name of the TTL attribute for items in the table.</p>
@@ -957,7 +957,7 @@ export interface BackupSummary {
      * @public
      * <p>Backup can be in one of the following states: CREATING, ACTIVE, DELETED.</p>
      */
-    BackupStatus?: BackupStatus | string;
+    BackupStatus?: BackupStatus;
     /**
      * @public
      * <p>BackupType:</p>
@@ -980,7 +980,7 @@ export interface BackupSummary {
      *             </li>
      *          </ul>
      */
-    BackupType?: BackupType | string;
+    BackupType?: BackupType;
     /**
      * @public
      * <p>Size of the backup in bytes.</p>
@@ -1237,7 +1237,7 @@ export interface BillingModeSummary {
      *             </li>
      *          </ul>
      */
-    BillingMode?: BillingMode | string;
+    BillingMode?: BillingMode;
     /**
      * @public
      * <p>Represents the time when <code>PAY_PER_REQUEST</code> was last set as the read/write
@@ -1323,7 +1323,7 @@ export interface PointInTimeRecoveryDescription {
      *             </li>
      *          </ul>
      */
-    PointInTimeRecoveryStatus?: PointInTimeRecoveryStatus | string;
+    PointInTimeRecoveryStatus?: PointInTimeRecoveryStatus;
     /**
      * @public
      * <p>Specifies the earliest point in time you can restore your table to. You can restore
@@ -1350,7 +1350,7 @@ export interface ContinuousBackupsDescription {
      *             <code>ContinuousBackupsStatus</code> can be one of the following states: ENABLED,
      *             DISABLED</p>
      */
-    ContinuousBackupsStatus: ContinuousBackupsStatus | string | undefined;
+    ContinuousBackupsStatus: ContinuousBackupsStatus | undefined;
     /**
      * @public
      * <p>The description of the point in time recovery settings applied to the table.</p>
@@ -1416,7 +1416,7 @@ export interface ContributorInsightsSummary {
      * <p>Describes the current status for contributor insights for the given table and index,
      *             if applicable.</p>
      */
-    ContributorInsightsStatus?: ContributorInsightsStatus | string;
+    ContributorInsightsStatus?: ContributorInsightsStatus;
 }
 /**
  * @public
@@ -1634,7 +1634,7 @@ export interface TableClassSummary {
      * <p>The table class of the specified table. Valid values are <code>STANDARD</code> and
      *                 <code>STANDARD_INFREQUENT_ACCESS</code>.</p>
      */
-    TableClass?: TableClass | string;
+    TableClass?: TableClass;
     /**
      * @public
      * <p>The date and time at which the table class was last updated.</p>
@@ -1694,7 +1694,7 @@ export interface ReplicaDescription {
      *             </li>
      *          </ul>
      */
-    ReplicaStatus?: ReplicaStatus | string;
+    ReplicaStatus?: ReplicaStatus;
     /**
      * @public
      * <p>Detailed information about the replica status.</p>
@@ -1777,7 +1777,7 @@ export interface GlobalTableDescription {
      *             </li>
      *          </ul>
      */
-    GlobalTableStatus?: GlobalTableStatus | string;
+    GlobalTableStatus?: GlobalTableStatus;
     /**
      * @public
      * <p>The global table name.</p>
@@ -1869,7 +1869,7 @@ export interface CreateReplicationGroupMemberAction {
      * <p>Replica-specific table class. If not specified, uses the source table's table
      *             class.</p>
      */
-    TableClassOverride?: TableClass | string;
+    TableClassOverride?: TableClass;
 }
 /**
  * @public
@@ -1994,7 +1994,7 @@ export interface SSESpecification {
      *             </li>
      *          </ul>
      */
-    SSEType?: SSEType | string;
+    SSEType?: SSEType;
     /**
      * @public
      * <p>The KMS key that should be used for the KMS encryption.
@@ -2237,7 +2237,7 @@ export interface CreateTableInput {
      *             </li>
      *          </ul>
      */
-    BillingMode?: BillingMode | string;
+    BillingMode?: BillingMode;
     /**
      * @public
      * <p>Represents the provisioned throughput settings for a specified table or index. The
@@ -2306,7 +2306,7 @@ export interface CreateTableInput {
      * <p>The table class of the new table. Valid values are <code>STANDARD</code> and
      *                 <code>STANDARD_INFREQUENT_ACCESS</code>.</p>
      */
-    TableClass?: TableClass | string;
+    TableClass?: TableClass;
     /**
      * @public
      * <p>Indicates whether deletion protection is to be enabled (true) or disabled (false) on the table.</p>
@@ -2431,7 +2431,7 @@ export interface GlobalSecondaryIndexDescription {
      *             </li>
      *          </ul>
      */
-    IndexStatus?: IndexStatus | string;
+    IndexStatus?: IndexStatus;
     /**
      * @public
      * <p>Indicates whether the index is currently backfilling. <i>Backfilling</i>
@@ -2692,7 +2692,7 @@ export interface TableDescription {
      *             </li>
      *          </ul>
      */
-    TableStatus?: TableStatus | string;
+    TableStatus?: TableStatus;
     /**
      * @public
      * <p>The date and time when the table was created, in <a href="http://www.epochconverter.com/">UNIX epoch time</a> format.</p>
@@ -3234,7 +3234,7 @@ export interface DescribeContributorInsightsOutput {
      * @public
      * <p>Current status of contributor insights.</p>
      */
-    ContributorInsightsStatus?: ContributorInsightsStatus | string;
+    ContributorInsightsStatus?: ContributorInsightsStatus;
     /**
      * @public
      * <p>Timestamp of the last time the status was changed.</p>
@@ -3375,7 +3375,7 @@ export interface IncrementalExportSpecification {
      * @public
      * <p>Choice of whether to output the previous item image prior to the start time of the incremental export. Valid values are <code>NEW_AND_OLD_IMAGES</code> and <code>NEW_IMAGES</code>.</p>
      */
-    ExportViewType?: ExportViewType | string;
+    ExportViewType?: ExportViewType;
 }
 /**
  * @public
@@ -3404,7 +3404,7 @@ export interface ExportDescription {
      * <p>Export can be in one of the following states: IN_PROGRESS, COMPLETED, or
      *             FAILED.</p>
      */
-    ExportStatus?: ExportStatus | string;
+    ExportStatus?: ExportStatus;
     /**
      * @public
      * <p>The time at which the export task began.</p>
@@ -3476,7 +3476,7 @@ export interface ExportDescription {
      *             </li>
      *          </ul>
      */
-    S3SseAlgorithm?: S3SseAlgorithm | string;
+    S3SseAlgorithm?: S3SseAlgorithm;
     /**
      * @public
      * <p>The ID of the KMS managed key used to encrypt the S3 bucket where
@@ -3498,7 +3498,7 @@ export interface ExportDescription {
      * <p>The format of the exported data. Valid values for <code>ExportFormat</code> are
      *                 <code>DYNAMODB_JSON</code> or <code>ION</code>.</p>
      */
-    ExportFormat?: ExportFormat | string;
+    ExportFormat?: ExportFormat;
     /**
      * @public
      * <p>The billable size of the table export.</p>
@@ -3513,7 +3513,7 @@ export interface ExportDescription {
      * @public
      * <p>Choice of whether to execute as a full export or incremental export. Valid values are <code>FULL_EXPORT</code> or <code>INCREMENTAL_EXPORT</code>. If <code>INCREMENTAL_EXPORT</code> is provided, the <code>IncrementalExportSpecification</code> must also be used.</p>
      */
-    ExportType?: ExportType | string;
+    ExportType?: ExportType;
     /**
      * @public
      * <p>Optional object containing the parameters specific to an incremental export.</p>
@@ -3617,7 +3617,7 @@ export interface ReplicaGlobalSecondaryIndexSettingsDescription {
      *             </li>
      *          </ul>
      */
-    IndexStatus?: IndexStatus | string;
+    IndexStatus?: IndexStatus;
     /**
      * @public
      * <p>The maximum number of strongly consistent reads consumed per second before DynamoDB
@@ -3675,7 +3675,7 @@ export interface ReplicaSettingsDescription {
      *             </li>
      *          </ul>
      */
-    ReplicaStatus?: ReplicaStatus | string;
+    ReplicaStatus?: ReplicaStatus;
     /**
      * @public
      * <p>The read/write capacity mode of the replica.</p>
@@ -3843,7 +3843,7 @@ export interface TableCreationParameters {
      * <p> The billing mode for provisioning the table created as part of the import operation.
      *         </p>
      */
-    BillingMode?: BillingMode | string;
+    BillingMode?: BillingMode;
     /**
      * @public
      * <p>Represents the provisioned throughput settings for a specified table or index. The
@@ -3881,7 +3881,7 @@ export interface ImportTableDescription {
      * @public
      * <p> The status of the import. </p>
      */
-    ImportStatus?: ImportStatus | string;
+    ImportStatus?: ImportStatus;
     /**
      * @public
      * <p> The Amazon Resource Number (ARN) of the table being imported into.
@@ -3923,7 +3923,7 @@ export interface ImportTableDescription {
      * <p> The format of the source data going into the target table.
      *             </p>
      */
-    InputFormat?: InputFormat | string;
+    InputFormat?: InputFormat;
     /**
      * @public
      * <p> The format options for the data that was imported into the target table. There is one
@@ -3935,7 +3935,7 @@ export interface ImportTableDescription {
      * <p> The compression options for the data that has been imported into the target table.
      *             The values are NONE, GZIP, or ZSTD. </p>
      */
-    InputCompressionType?: InputCompressionType | string;
+    InputCompressionType?: InputCompressionType;
     /**
      * @public
      * <p> The parameters for the new table that is being imported into. </p>
@@ -4045,7 +4045,7 @@ export interface KinesisDataStreamDestination {
      * @public
      * <p>The current status of replication.</p>
      */
-    DestinationStatus?: DestinationStatus | string;
+    DestinationStatus?: DestinationStatus;
     /**
      * @public
      * <p>The human-readable string that corresponds to the replica status.</p>
@@ -4173,7 +4173,7 @@ export interface ReplicaGlobalSecondaryIndexAutoScalingDescription {
      *             </li>
      *          </ul>
      */
-    IndexStatus?: IndexStatus | string;
+    IndexStatus?: IndexStatus;
     /**
      * @public
      * <p>Represents the auto scaling settings for a global table or global secondary
@@ -4236,7 +4236,7 @@ export interface ReplicaAutoScalingDescription {
      *             </li>
      *          </ul>
      */
-    ReplicaStatus?: ReplicaStatus | string;
+    ReplicaStatus?: ReplicaStatus;
 }
 /**
  * @public
@@ -4270,7 +4270,7 @@ export interface TableAutoScalingDescription {
      *             </li>
      *          </ul>
      */
-    TableStatus?: TableStatus | string;
+    TableStatus?: TableStatus;
     /**
      * @public
      * <p>Represents replicas of the global table.</p>
@@ -4340,7 +4340,7 @@ export interface KinesisStreamingDestinationOutput {
      * @public
      * <p>The current status of the replication.</p>
      */
-    DestinationStatus?: DestinationStatus | string;
+    DestinationStatus?: DestinationStatus;
 }
 /**
  * @public
@@ -4520,7 +4520,7 @@ export interface ExportTableToPointInTimeInput {
      *             </li>
      *          </ul>
      */
-    S3SseAlgorithm?: S3SseAlgorithm | string;
+    S3SseAlgorithm?: S3SseAlgorithm;
     /**
      * @public
      * <p>The ID of the KMS managed key used to encrypt the S3 bucket where
@@ -4532,12 +4532,12 @@ export interface ExportTableToPointInTimeInput {
      * <p>The format for the exported data. Valid values for <code>ExportFormat</code> are
      *                 <code>DYNAMODB_JSON</code> or <code>ION</code>.</p>
      */
-    ExportFormat?: ExportFormat | string;
+    ExportFormat?: ExportFormat;
     /**
      * @public
      * <p>Choice of whether to execute as a full export or incremental export. Valid values are <code>FULL_EXPORT</code> or <code>INCREMENTAL_EXPORT</code>. If <code>INCREMENTAL_EXPORT</code> is provided, the <code>IncrementalExportSpecification</code> must also be used.</p>
      */
-    ExportType?: ExportType | string;
+    ExportType?: ExportType;
     /**
      * @public
      * <p>Optional object containing the parameters specific to an incremental export.</p>
@@ -4623,7 +4623,7 @@ export interface ImportTableInput {
      * <p> The format of the source data. Valid values for <code>ImportFormat</code> are
      *                 <code>CSV</code>, <code>DYNAMODB_JSON</code> or <code>ION</code>. </p>
      */
-    InputFormat: InputFormat | string | undefined;
+    InputFormat: InputFormat | undefined;
     /**
      * @public
      * <p> Additional properties that specify how the input is formatted, </p>
@@ -4633,7 +4633,7 @@ export interface ImportTableInput {
      * @public
      * <p> Type of compression to be used on the input coming from the imported table. </p>
      */
-    InputCompressionType?: InputCompressionType | string;
+    InputCompressionType?: InputCompressionType;
     /**
      * @public
      * <p>Parameters for the table to import the data into. </p>
@@ -4708,7 +4708,7 @@ export interface ListBackupsInput {
      *             </li>
      *          </ul>
      */
-    BackupType?: BackupTypeFilter | string;
+    BackupType?: BackupTypeFilter;
 }
 /**
  * @public
@@ -4805,12 +4805,12 @@ export interface ExportSummary {
      * <p>Export can be in one of the following states: IN_PROGRESS, COMPLETED, or
      *             FAILED.</p>
      */
-    ExportStatus?: ExportStatus | string;
+    ExportStatus?: ExportStatus;
     /**
      * @public
      * <p>Choice of whether to execute as a full export or incremental export. Valid values are <code>FULL_EXPORT</code> or <code>INCREMENTAL_EXPORT</code>. If <code>INCREMENTAL_EXPORT</code> is provided, the <code>IncrementalExportSpecification</code> must also be used.</p>
      */
-    ExportType?: ExportType | string;
+    ExportType?: ExportType;
 }
 /**
  * @public
@@ -4923,7 +4923,7 @@ export interface ImportSummary {
      * @public
      * <p> The status of the import operation. </p>
      */
-    ImportStatus?: ImportStatus | string;
+    ImportStatus?: ImportStatus;
     /**
      * @public
      * <p> The Amazon Resource Number (ARN) of the table being imported into. </p>
@@ -4947,7 +4947,7 @@ export interface ImportSummary {
      * <p> The format of the source data. Valid values are <code>CSV</code>,
      *                 <code>DYNAMODB_JSON</code> or <code>ION</code>.</p>
      */
-    InputFormat?: InputFormat | string;
+    InputFormat?: InputFormat;
     /**
      * @public
      * <p> The time at which this import task began. </p>
@@ -5086,7 +5086,7 @@ export interface RestoreTableFromBackupInput {
      * @public
      * <p>The billing mode of the restored table.</p>
      */
-    BillingModeOverride?: BillingMode | string;
+    BillingModeOverride?: BillingMode;
     /**
      * @public
      * <p>List of global secondary indexes for the restored table. The indexes provided should
@@ -5182,7 +5182,7 @@ export interface RestoreTableToPointInTimeInput {
      * @public
      * <p>The billing mode of the restored table.</p>
      */
-    BillingModeOverride?: BillingMode | string;
+    BillingModeOverride?: BillingMode;
     /**
      * @public
      * <p>List of global secondary indexes for the restored table. The indexes provided should
@@ -5307,7 +5307,7 @@ export interface UpdateContributorInsightsInput {
      * @public
      * <p>Represents the contributor insights action.</p>
      */
-    ContributorInsightsAction: ContributorInsightsAction | string | undefined;
+    ContributorInsightsAction: ContributorInsightsAction | undefined;
 }
 /**
  * @public
@@ -5327,7 +5327,7 @@ export interface UpdateContributorInsightsOutput {
      * @public
      * <p>The status of contributor insights</p>
      */
-    ContributorInsightsStatus?: ContributorInsightsStatus | string;
+    ContributorInsightsStatus?: ContributorInsightsStatus;
 }
 /**
  * @public
@@ -5502,7 +5502,7 @@ export interface ReplicaSettingsUpdate {
      * <p>Replica-specific table class. If not specified, uses the source table's table
      *             class.</p>
      */
-    ReplicaTableClass?: TableClass | string;
+    ReplicaTableClass?: TableClass;
 }
 /**
  * @public
@@ -5532,7 +5532,7 @@ export interface UpdateGlobalTableSettingsInput {
      *             </li>
      *          </ul>
      */
-    GlobalTableBillingMode?: BillingMode | string;
+    GlobalTableBillingMode?: BillingMode;
     /**
      * @public
      * <p>The maximum number of writes consumed per second before DynamoDB returns a
@@ -5691,7 +5691,7 @@ export interface UpdateReplicationGroupMemberAction {
      * <p>Replica-specific table class. If not specified, uses the source table's table
      *             class.</p>
      */
-    TableClassOverride?: TableClass | string;
+    TableClassOverride?: TableClass;
 }
 /**
  * @public
@@ -5773,7 +5773,7 @@ export interface UpdateTableInput {
      *             </li>
      *          </ul>
      */
-    BillingMode?: BillingMode | string;
+    BillingMode?: BillingMode;
     /**
      * @public
      * <p>The new provisioned throughput settings for the specified table or index.</p>
@@ -5835,7 +5835,7 @@ export interface UpdateTableInput {
      * <p>The table class of the table to be updated. Valid values are <code>STANDARD</code> and
      *                 <code>STANDARD_INFREQUENT_ACCESS</code>.</p>
      */
-    TableClass?: TableClass | string;
+    TableClass?: TableClass;
     /**
      * @public
      * <p>Indicates whether deletion protection is to be enabled (true) or disabled (false) on the table.</p>
@@ -6364,7 +6364,7 @@ export interface AttributeValueUpdate {
      *             </li>
      *          </ul>
      */
-    Action?: AttributeAction | string;
+    Action?: AttributeAction;
 }
 /**
  * @public
@@ -6375,7 +6375,7 @@ export interface BatchStatementError {
      * @public
      * <p> The error code associated with the failed PartiQL batch statement. </p>
      */
-    Code?: BatchStatementErrorCodeEnum | string;
+    Code?: BatchStatementErrorCodeEnum;
     /**
      * @public
      * <p> The error message associated with the PartiQL batch response. </p>
@@ -6415,7 +6415,7 @@ export interface BatchStatementRequest {
      *             small network and processing overhead of receiving a larger response. No read capacity
      *             units are consumed.</p>
      */
-    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure | string;
+    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure;
 }
 /**
  * @public
@@ -6667,7 +6667,7 @@ export interface Condition {
      *                 Conditional Parameters</a> in the <i>Amazon DynamoDB Developer
      *                 Guide</i>.</p>
      */
-    ComparisonOperator: ComparisonOperator | string | undefined;
+    ComparisonOperator: ComparisonOperator | undefined;
 }
 /**
  * @public
@@ -6753,7 +6753,7 @@ export interface ExecuteStatementInput {
      *             </li>
      *          </ul>
      */
-    ReturnConsumedCapacity?: ReturnConsumedCapacity | string;
+    ReturnConsumedCapacity?: ReturnConsumedCapacity;
     /**
      * @public
      * <p>The maximum number of items to evaluate (not necessarily the number of matching
@@ -6774,7 +6774,7 @@ export interface ExecuteStatementInput {
      *             small network and processing overhead of receiving a larger response. No read capacity
      *             units are consumed.</p>
      */
-    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure | string;
+    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure;
 }
 /**
  * @public
@@ -6870,7 +6870,7 @@ export interface GetItemInput {
      *             </li>
      *          </ul>
      */
-    ReturnConsumedCapacity?: ReturnConsumedCapacity | string;
+    ReturnConsumedCapacity?: ReturnConsumedCapacity;
     /**
      * @public
      * <p>A string that identifies one or more attributes to retrieve from the table. These
@@ -7020,7 +7020,7 @@ export interface ParameterizedStatement {
      *             small network and processing overhead of receiving a larger response. No read capacity
      *             units are consumed.</p>
      */
-    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure | string;
+    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure;
 }
 /**
  * @public
@@ -7184,7 +7184,7 @@ export interface BatchExecuteStatementInput {
      *             </li>
      *          </ul>
      */
-    ReturnConsumedCapacity?: ReturnConsumedCapacity | string;
+    ReturnConsumedCapacity?: ReturnConsumedCapacity;
 }
 /**
  * @public
@@ -7206,7 +7206,7 @@ export interface ExecuteTransactionInput {
      * <p>Determines the level of detail about either provisioned or on-demand throughput
      *             consumption that is returned in the response. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_TransactGetItems.html">TransactGetItems</a> and <a href="https://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_TransactWriteItems.html">TransactWriteItems</a>.</p>
      */
-    ReturnConsumedCapacity?: ReturnConsumedCapacity | string;
+    ReturnConsumedCapacity?: ReturnConsumedCapacity;
 }
 /**
  * @public
@@ -7634,7 +7634,7 @@ export interface BatchGetItemInput {
      *             </li>
      *          </ul>
      */
-    ReturnConsumedCapacity?: ReturnConsumedCapacity | string;
+    ReturnConsumedCapacity?: ReturnConsumedCapacity;
 }
 /**
  * @public
@@ -7901,7 +7901,7 @@ export interface ExpectedAttributeValue {
      *             </li>
      *          </ul>
      */
-    ComparisonOperator?: ComparisonOperator | string;
+    ComparisonOperator?: ComparisonOperator;
     /**
      * @public
      * <p>One or more values to evaluate against the supplied attribute. The number of values in
@@ -7933,7 +7933,7 @@ export interface TransactGetItemsInput {
      *             a value of <code>NONE</code> prevents that information from being returned. No other
      *             value is valid.</p>
      */
-    ReturnConsumedCapacity?: ReturnConsumedCapacity | string;
+    ReturnConsumedCapacity?: ReturnConsumedCapacity;
 }
 /**
  * @public
@@ -7998,7 +7998,7 @@ export interface ConditionCheck {
      *                 <code>ReturnValuesOnConditionCheckFailure</code>, the valid values are: NONE and
      *             ALL_OLD.</p>
      */
-    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure | string;
+    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure;
 }
 /**
  * @public
@@ -8039,7 +8039,7 @@ export interface Delete {
      *                 <code>ReturnValuesOnConditionCheckFailure</code>, the valid values are: NONE and
      *             ALL_OLD.</p>
      */
-    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure | string;
+    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure;
 }
 /**
  * @public
@@ -8083,7 +8083,7 @@ export interface Put {
      *                 <code>ReturnValuesOnConditionCheckFailure</code>, the valid values are: NONE and
      *             ALL_OLD.</p>
      */
-    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure | string;
+    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure;
 }
 /**
  * @public
@@ -8130,7 +8130,7 @@ export interface Update {
      *                 <code>ReturnValuesOnConditionCheckFailure</code>, the valid values are: NONE and
      *             ALL_OLD.</p>
      */
-    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure | string;
+    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure;
 }
 /**
  * @public
@@ -8652,7 +8652,7 @@ export interface ScanInput {
      *                 value for <code>Select</code> will return an error.</p>
      *          </note>
      */
-    Select?: Select | string;
+    Select?: Select;
     /**
      * @public
      * <p>This is a legacy parameter. Use <code>FilterExpression</code> instead. For more
@@ -8666,7 +8666,7 @@ export interface ScanInput {
      *             information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html">ConditionalOperator</a> in the <i>Amazon DynamoDB Developer
      *                 Guide</i>.</p>
      */
-    ConditionalOperator?: ConditionalOperator | string;
+    ConditionalOperator?: ConditionalOperator;
     /**
      * @public
      * <p>The primary key of the first item that this operation will evaluate. Use the value
@@ -8707,7 +8707,7 @@ export interface ScanInput {
      *             </li>
      *          </ul>
      */
-    ReturnConsumedCapacity?: ReturnConsumedCapacity | string;
+    ReturnConsumedCapacity?: ReturnConsumedCapacity;
     /**
      * @public
      * <p>For a parallel <code>Scan</code> request, <code>TotalSegments</code> represents the
@@ -8945,7 +8945,7 @@ export interface BatchWriteItemInput {
      *             </li>
      *          </ul>
      */
-    ReturnConsumedCapacity?: ReturnConsumedCapacity | string;
+    ReturnConsumedCapacity?: ReturnConsumedCapacity;
     /**
      * @public
      * <p>Determines whether item collection metrics are returned. If set to <code>SIZE</code>,
@@ -8953,7 +8953,7 @@ export interface BatchWriteItemInput {
      *             during the operation are returned in the response. If set to <code>NONE</code> (the
      *             default), no statistics are returned.</p>
      */
-    ReturnItemCollectionMetrics?: ReturnItemCollectionMetrics | string;
+    ReturnItemCollectionMetrics?: ReturnItemCollectionMetrics;
 }
 /**
  * @public
@@ -8988,7 +8988,7 @@ export interface DeleteItemInput {
      *             information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html">ConditionalOperator</a> in the <i>Amazon DynamoDB Developer
      *                 Guide</i>.</p>
      */
-    ConditionalOperator?: ConditionalOperator | string;
+    ConditionalOperator?: ConditionalOperator;
     /**
      * @public
      * <p>Use <code>ReturnValues</code> if you want to get the item attributes as they appeared
@@ -9014,7 +9014,7 @@ export interface DeleteItemInput {
      *                     <code>NONE</code> or <code>ALL_OLD</code>.</p>
      *          </note>
      */
-    ReturnValues?: ReturnValue | string;
+    ReturnValues?: ReturnValue;
     /**
      * @public
      * <p>Determines the level of detail about either provisioned or on-demand throughput
@@ -9043,7 +9043,7 @@ export interface DeleteItemInput {
      *             </li>
      *          </ul>
      */
-    ReturnConsumedCapacity?: ReturnConsumedCapacity | string;
+    ReturnConsumedCapacity?: ReturnConsumedCapacity;
     /**
      * @public
      * <p>Determines whether item collection metrics are returned. If set to <code>SIZE</code>,
@@ -9051,7 +9051,7 @@ export interface DeleteItemInput {
      *             during the operation are returned in the response. If set to <code>NONE</code> (the
      *             default), no statistics are returned.</p>
      */
-    ReturnItemCollectionMetrics?: ReturnItemCollectionMetrics | string;
+    ReturnItemCollectionMetrics?: ReturnItemCollectionMetrics;
     /**
      * @public
      * <p>A condition that must be satisfied in order for a conditional <code>DeleteItem</code>
@@ -9165,7 +9165,7 @@ export interface DeleteItemInput {
      *             small network and processing overhead of receiving a larger response. No read capacity
      *             units are consumed.</p>
      */
-    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure | string;
+    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure;
 }
 /**
  * @public
@@ -9233,7 +9233,7 @@ export interface PutItemInput {
      *                     <code>NONE</code> or <code>ALL_OLD</code>.</p>
      *          </note>
      */
-    ReturnValues?: ReturnValue | string;
+    ReturnValues?: ReturnValue;
     /**
      * @public
      * <p>Determines the level of detail about either provisioned or on-demand throughput
@@ -9262,7 +9262,7 @@ export interface PutItemInput {
      *             </li>
      *          </ul>
      */
-    ReturnConsumedCapacity?: ReturnConsumedCapacity | string;
+    ReturnConsumedCapacity?: ReturnConsumedCapacity;
     /**
      * @public
      * <p>Determines whether item collection metrics are returned. If set to <code>SIZE</code>,
@@ -9270,14 +9270,14 @@ export interface PutItemInput {
      *             during the operation are returned in the response. If set to <code>NONE</code> (the
      *             default), no statistics are returned.</p>
      */
-    ReturnItemCollectionMetrics?: ReturnItemCollectionMetrics | string;
+    ReturnItemCollectionMetrics?: ReturnItemCollectionMetrics;
     /**
      * @public
      * <p>This is a legacy parameter. Use <code>ConditionExpression</code> instead. For more
      *             information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html">ConditionalOperator</a> in the <i>Amazon DynamoDB Developer
      *                 Guide</i>.</p>
      */
-    ConditionalOperator?: ConditionalOperator | string;
+    ConditionalOperator?: ConditionalOperator;
     /**
      * @public
      * <p>A condition that must be satisfied in order for a conditional <code>PutItem</code>
@@ -9391,7 +9391,7 @@ export interface PutItemInput {
      *             small network and processing overhead of receiving a larger response. No read capacity
      *             units are consumed.</p>
      */
-    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure | string;
+    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure;
 }
 /**
  * @public
@@ -9468,7 +9468,7 @@ export interface QueryInput {
      *                 value for <code>Select</code> will return an error.</p>
      *          </note>
      */
-    Select?: Select | string;
+    Select?: Select;
     /**
      * @public
      * <p>This is a legacy parameter. Use <code>ProjectionExpression</code> instead. For more
@@ -9519,7 +9519,7 @@ export interface QueryInput {
      *             information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html">ConditionalOperator</a> in the <i>Amazon DynamoDB Developer
      *                 Guide</i>.</p>
      */
-    ConditionalOperator?: ConditionalOperator | string;
+    ConditionalOperator?: ConditionalOperator;
     /**
      * @public
      * <p>Specifies the order for index traversal: If <code>true</code> (default), the traversal
@@ -9571,7 +9571,7 @@ export interface QueryInput {
      *             </li>
      *          </ul>
      */
-    ReturnConsumedCapacity?: ReturnConsumedCapacity | string;
+    ReturnConsumedCapacity?: ReturnConsumedCapacity;
     /**
      * @public
      * <p>A string that identifies one or more attributes to retrieve from the table. These
@@ -9934,7 +9934,7 @@ export interface UpdateItemInput {
      *             information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/LegacyConditionalParameters.ConditionalOperator.html">ConditionalOperator</a> in the <i>Amazon DynamoDB Developer
      *                 Guide</i>.</p>
      */
-    ConditionalOperator?: ConditionalOperator | string;
+    ConditionalOperator?: ConditionalOperator;
     /**
      * @public
      * <p>Use <code>ReturnValues</code> if you want to get the item attributes as they appear
@@ -9973,7 +9973,7 @@ export interface UpdateItemInput {
      *             units are consumed.</p>
      *          <p>The values returned are strongly consistent.</p>
      */
-    ReturnValues?: ReturnValue | string;
+    ReturnValues?: ReturnValue;
     /**
      * @public
      * <p>Determines the level of detail about either provisioned or on-demand throughput
@@ -10002,7 +10002,7 @@ export interface UpdateItemInput {
      *             </li>
      *          </ul>
      */
-    ReturnConsumedCapacity?: ReturnConsumedCapacity | string;
+    ReturnConsumedCapacity?: ReturnConsumedCapacity;
     /**
      * @public
      * <p>Determines whether item collection metrics are returned. If set to <code>SIZE</code>,
@@ -10010,7 +10010,7 @@ export interface UpdateItemInput {
      *             during the operation are returned in the response. If set to <code>NONE</code> (the
      *             default), no statistics are returned.</p>
      */
-    ReturnItemCollectionMetrics?: ReturnItemCollectionMetrics | string;
+    ReturnItemCollectionMetrics?: ReturnItemCollectionMetrics;
     /**
      * @public
      * <p>An expression that defines one or more attributes to be updated, the action to be
@@ -10230,7 +10230,7 @@ export interface UpdateItemInput {
      *             small network and processing overhead of receiving a larger response. No read capacity
      *             units are consumed.</p>
      */
-    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure | string;
+    ReturnValuesOnConditionCheckFailure?: ReturnValuesOnConditionCheckFailure;
 }
 /**
  * @public
@@ -10300,7 +10300,7 @@ export interface TransactWriteItemsInput {
      *             </li>
      *          </ul>
      */
-    ReturnConsumedCapacity?: ReturnConsumedCapacity | string;
+    ReturnConsumedCapacity?: ReturnConsumedCapacity;
     /**
      * @public
      * <p>Determines whether item collection metrics are returned. If set to <code>SIZE</code>,
@@ -10308,7 +10308,7 @@ export interface TransactWriteItemsInput {
      *             during the operation and are returned in the response. If set to <code>NONE</code> (the
      *             default), no statistics are returned. </p>
      */
-    ReturnItemCollectionMetrics?: ReturnItemCollectionMetrics | string;
+    ReturnItemCollectionMetrics?: ReturnItemCollectionMetrics;
     /**
      * @public
      * <p>Providing a <code>ClientRequestToken</code> makes the call to