@aws-sdk/client-dynamodb 3.38.0 → 3.42.0

package/dist-types/commands/DeleteTableCommand.d.ts

@@ -8,22 +8,24 @@ export interface DeleteTableCommandOutput extends DeleteTableOutput, __MetadataB
 }
 /**
  * <p>The <code>DeleteTable</code> operation deletes a table and all of its items. After a
- *         <code>DeleteTable</code> request, the specified table is in the <code>DELETING</code> state until
- *       DynamoDB completes the deletion. If the table is in the <code>ACTIVE</code> state, you can delete
- *       it. If a table is in <code>CREATING</code> or <code>UPDATING</code> states, then DynamoDB returns
- *       a <code>ResourceInUseException</code>. If the specified table does not exist, DynamoDB returns a
- *         <code>ResourceNotFoundException</code>. If table is already in the <code>DELETING</code> state, no
- *       error is returned. </p>
- *          <note>
- *             <p>DynamoDB might continue to accept data read and write operations, such as <code>GetItem</code> and
- *           <code>PutItem</code>, on a table in the <code>DELETING</code> state until the table deletion is
- *         complete.</p>
- *          </note>
- *          <p>When you delete a table, any indexes on that table are also deleted.</p>
- *          <p>If you have DynamoDB Streams enabled on the table, then the corresponding stream on that table goes
- *       into the <code>DISABLED</code> state, and the stream is automatically deleted after 24 hours.</p>
+ *                 <code>DeleteTable</code> request, the specified table is in the
+ *                 <code>DELETING</code> state until DynamoDB completes the deletion. If the table is
+ *             in the <code>ACTIVE</code> state, you can delete it. If a table is in
+ *                 <code>CREATING</code> or <code>UPDATING</code> states, then DynamoDB returns a
+ *                 <code>ResourceInUseException</code>. If the specified table does not exist, DynamoDB
+ *             returns a <code>ResourceNotFoundException</code>. If table is already in the
+ *                 <code>DELETING</code> state, no error is returned. </p>
+ *         <note>
+ *             <p>DynamoDB might continue to accept data read and write operations, such as
+ *                     <code>GetItem</code> and <code>PutItem</code>, on a table in the
+ *                     <code>DELETING</code> state until the table deletion is complete.</p>
+ *         </note>
+ *         <p>When you delete a table, any indexes on that table are also deleted.</p>
+ *         <p>If you have DynamoDB Streams enabled on the table, then the corresponding stream on
+ *             that table goes into the <code>DISABLED</code> state, and the stream is automatically
+ *             deleted after 24 hours.</p>
  *
- *          <p>Use the <code>DescribeTable</code> action to check the status of the table. </p>
+ *         <p>Use the <code>DescribeTable</code> action to check the status of the table. </p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -36,7 +38,7 @@ export interface DeleteTableCommandOutput extends DeleteTableOutput, __MetadataB
  *
  * @see {@link DeleteTableCommandInput} for command's `input` shape.
  * @see {@link DeleteTableCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class DeleteTableCommand extends $Command<DeleteTableCommandInput, DeleteTableCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/DescribeBackupCommand.d.ts

@@ -8,7 +8,8 @@ export interface DescribeBackupCommandOutput extends DescribeBackupOutput, __Met
 }
 /**
  * <p>Describes an existing backup of a table.</p>
- *          <p>You can call <code>DescribeBackup</code> at a maximum rate of 10 times per second.</p>
+ *         <p>You can call <code>DescribeBackup</code> at a maximum rate of 10 times per
+ *             second.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -21,7 +22,7 @@ export interface DescribeBackupCommandOutput extends DescribeBackupOutput, __Met
  *
  * @see {@link DescribeBackupCommandInput} for command's `input` shape.
  * @see {@link DescribeBackupCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class DescribeBackupCommand extends $Command<DescribeBackupCommandInput, DescribeBackupCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/DescribeContinuousBackupsCommand.d.ts

@@ -7,17 +7,18 @@ export interface DescribeContinuousBackupsCommandInput extends DescribeContinuou
 export interface DescribeContinuousBackupsCommandOutput extends DescribeContinuousBackupsOutput, __MetadataBearer {
 }
 /**
- * <p>Checks the status of continuous backups and point in time recovery on the specified table.
- *       Continuous backups are <code>ENABLED</code> on all tables at table creation.
- *       If point in time recovery is enabled, <code>PointInTimeRecoveryStatus</code> will be set to ENABLED.</p>
- *          <p> After continuous backups and point in time recovery are enabled, you can restore to any
- *             point in time within <code>EarliestRestorableDateTime</code> and
+ * <p>Checks the status of continuous backups and point in time recovery on the specified
+ *             table. Continuous backups are <code>ENABLED</code> on all tables at table creation. If
+ *             point in time recovery is enabled, <code>PointInTimeRecoveryStatus</code> will be set to
+ *             ENABLED.</p>
+ *         <p> After continuous backups and point in time recovery are enabled, you can restore to
+ *             any point in time within <code>EarliestRestorableDateTime</code> and
  *                 <code>LatestRestorableDateTime</code>. </p>
- *          <p>
- *             <code>LatestRestorableDateTime</code> is typically 5 minutes before the current time. You can restore your table to any point
- *        in time during the last 35 days.
- *      </p>
- *          <p>You can call <code>DescribeContinuousBackups</code> at a maximum rate of 10 times per second.</p>
+ *         <p>
+ *             <code>LatestRestorableDateTime</code> is typically 5 minutes before the current time.
+ *             You can restore your table to any point in time during the last 35 days. </p>
+ *         <p>You can call <code>DescribeContinuousBackups</code> at a maximum rate of 10 times per
+ *             second.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -30,7 +31,7 @@ export interface DescribeContinuousBackupsCommandOutput extends DescribeContinuo
  *
  * @see {@link DescribeContinuousBackupsCommandInput} for command's `input` shape.
  * @see {@link DescribeContinuousBackupsCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class DescribeContinuousBackupsCommand extends $Command<DescribeContinuousBackupsCommandInput, DescribeContinuousBackupsCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/DescribeContributorInsightsCommand.d.ts

@@ -7,7 +7,8 @@ export interface DescribeContributorInsightsCommandInput extends DescribeContrib
 export interface DescribeContributorInsightsCommandOutput extends DescribeContributorInsightsOutput, __MetadataBearer {
 }
 /**
- * <p>Returns information about contributor insights, for a given table or global secondary index.</p>
+ * <p>Returns information about contributor insights, for a given table or global secondary
+ *             index.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -20,7 +21,7 @@ export interface DescribeContributorInsightsCommandOutput extends DescribeContri
  *
  * @see {@link DescribeContributorInsightsCommandInput} for command's `input` shape.
  * @see {@link DescribeContributorInsightsCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class DescribeContributorInsightsCommand extends $Command<DescribeContributorInsightsCommandInput, DescribeContributorInsightsCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/DescribeEndpointsCommand.d.ts

@@ -20,7 +20,7 @@ export interface DescribeEndpointsCommandOutput extends DescribeEndpointsRespons
  *
  * @see {@link DescribeEndpointsCommandInput} for command's `input` shape.
  * @see {@link DescribeEndpointsCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class DescribeEndpointsCommand extends $Command<DescribeEndpointsCommandInput, DescribeEndpointsCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/DescribeExportCommand.d.ts

@@ -20,7 +20,7 @@ export interface DescribeExportCommandOutput extends DescribeExportOutput, __Met
  *
  * @see {@link DescribeExportCommandInput} for command's `input` shape.
  * @see {@link DescribeExportCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class DescribeExportCommand extends $Command<DescribeExportCommandInput, DescribeExportCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/DescribeGlobalTableCommand.d.ts

@@ -8,10 +8,11 @@ export interface DescribeGlobalTableCommandOutput extends DescribeGlobalTableOut
 }
 /**
  * <p>Returns information about the specified global table.</p>
- *           <note>
- *             <p>This operation only applies to <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V1.html">Version 2017.11.29</a> of global tables.
- *                    If you are using global tables <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V2.html">Version 2019.11.21</a> you can use <a href="https://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_DescribeTable.html">DescribeTable</a> instead.</p>
- *          </note>
+ *         <note>
+ *             <p>This operation only applies to <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V1.html">Version
+ *                     2017.11.29</a> of global tables. If you are using global tables <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V2.html">Version
+ *                     2019.11.21</a> you can use <a href="https://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_DescribeTable.html">DescribeTable</a> instead.</p>
+ *         </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -24,7 +25,7 @@ export interface DescribeGlobalTableCommandOutput extends DescribeGlobalTableOut
  *
  * @see {@link DescribeGlobalTableCommandInput} for command's `input` shape.
  * @see {@link DescribeGlobalTableCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class DescribeGlobalTableCommand extends $Command<DescribeGlobalTableCommandInput, DescribeGlobalTableCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/DescribeGlobalTableSettingsCommand.d.ts

@@ -8,9 +8,10 @@ export interface DescribeGlobalTableSettingsCommandOutput extends DescribeGlobal
 }
 /**
  * <p>Describes Region-specific settings for a global table.</p>
- *           <note>
- *             <p>This operation only applies to <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V1.html">Version 2017.11.29</a> of global tables.</p>
- *          </note>
+ *         <note>
+ *             <p>This operation only applies to <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V1.html">Version
+ *                     2017.11.29</a> of global tables.</p>
+ *         </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -23,7 +24,7 @@ export interface DescribeGlobalTableSettingsCommandOutput extends DescribeGlobal
  *
  * @see {@link DescribeGlobalTableSettingsCommandInput} for command's `input` shape.
  * @see {@link DescribeGlobalTableSettingsCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class DescribeGlobalTableSettingsCommand extends $Command<DescribeGlobalTableSettingsCommandInput, DescribeGlobalTableSettingsCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/DescribeKinesisStreamingDestinationCommand.d.ts

@@ -20,7 +20,7 @@ export interface DescribeKinesisStreamingDestinationCommandOutput extends Descri
  *
  * @see {@link DescribeKinesisStreamingDestinationCommandInput} for command's `input` shape.
  * @see {@link DescribeKinesisStreamingDestinationCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class DescribeKinesisStreamingDestinationCommand extends $Command<DescribeKinesisStreamingDestinationCommandInput, DescribeKinesisStreamingDestinationCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/DescribeLimitsCommand.d.ts

@@ -7,70 +7,80 @@ export interface DescribeLimitsCommandInput extends DescribeLimitsInput {
 export interface DescribeLimitsCommandOutput extends DescribeLimitsOutput, __MetadataBearer {
 }
 /**
- * <p>Returns the current provisioned-capacity quotas for your AWS account in a Region, both
- *             for the Region as a whole and for any one DynamoDB table that you create there.</p>
- *          <p>When you establish an AWS account, the account has initial quotas on the maximum read
- *             capacity units and write capacity units that you can provision across all of your
- *             DynamoDB tables in a given Region. Also, there are per-table quotas that apply when you
- *             create a table there. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html">Service, Account, and Table
- *                 Quotas</a> page in the <i>Amazon DynamoDB Developer
- *             Guide</i>.</p>
+ * <p>Returns the current provisioned-capacity quotas for your Amazon Web Services account in
+ *             a Region, both for the Region as a whole and for any one DynamoDB table that you create
+ *             there.</p>
+ *         <p>When you establish an Amazon Web Services account, the account has initial quotas on
+ *             the maximum read capacity units and write capacity units that you can provision across
+ *             all of your DynamoDB tables in a given Region. Also, there are per-table
+ *             quotas that apply when you create a table there. For more information, see <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html">Service,
+ *                 Account, and Table Quotas</a> page in the <i>Amazon DynamoDB
+ *                 Developer Guide</i>.</p>
  *
- *          <p>Although you can increase these quotas by filing a case at <a href="https://console.aws.amazon.com/support/home#/">AWS Support Center</a>, obtaining the increase is not
- *             instantaneous. The <code>DescribeLimits</code> action lets you write code to compare the
- *             capacity you are currently using to those quotas imposed by your account so that you
- *             have enough time to apply for an increase before you hit a quota.</p>
+ *         <p>Although you can increase these quotas by filing a case at <a href="https://console.aws.amazon.com/support/home#/">Amazon Web Services Support Center</a>, obtaining the
+ *             increase is not instantaneous. The <code>DescribeLimits</code> action lets you write
+ *             code to compare the capacity you are currently using to those quotas imposed by your
+ *             account so that you have enough time to apply for an increase before you hit a
+ *             quota.</p>
  *
- *          <p>For example, you could use one of the AWS SDKs to do the following:</p>
+ *         <p>For example, you could use one of the Amazon Web Services SDKs to do the
+ *             following:</p>
  *
- *          <ol>
+ *         <ol>
  *             <li>
- *                <p>Call <code>DescribeLimits</code> for a particular Region to obtain your current
- *                     account quotas on provisioned capacity there.</p>
+ *                 <p>Call <code>DescribeLimits</code> for a particular Region to obtain your
+ *                     current account quotas on provisioned capacity there.</p>
  *             </li>
  *             <li>
- *                <p>Create a variable to hold the aggregate read capacity units provisioned for all
- *                     your tables in that Region, and one to hold the aggregate write capacity units.
- *                     Zero them both.</p>
+ *                 <p>Create a variable to hold the aggregate read capacity units provisioned for
+ *                     all your tables in that Region, and one to hold the aggregate write capacity
+ *                     units. Zero them both.</p>
  *             </li>
  *             <li>
- *                <p>Call <code>ListTables</code> to obtain a list of all your DynamoDB tables.</p>
+ *                 <p>Call <code>ListTables</code> to obtain a list of all your DynamoDB
+ *                     tables.</p>
  *             </li>
  *             <li>
- *                <p>For each table name listed by <code>ListTables</code>, do the following:</p>
- *                <ul>
+ *                 <p>For each table name listed by <code>ListTables</code>, do the
+ *                     following:</p>
+ *                 <ul>
  *                   <li>
- *                      <p>Call <code>DescribeTable</code> with the table name.</p>
- *                   </li>
+ *                         <p>Call <code>DescribeTable</code> with the table name.</p>
+ *                     </li>
  *                   <li>
- *                      <p>Use the data returned by <code>DescribeTable</code> to add the read capacity units and write capacity
- *             units provisioned for the table itself to your variables.</p>
- *                   </li>
+ *                         <p>Use the data returned by <code>DescribeTable</code> to add the read
+ *                             capacity units and write capacity units provisioned for the table itself
+ *                             to your variables.</p>
+ *                     </li>
  *                   <li>
- *                      <p>If the table has one or more global secondary indexes (GSIs), loop over these GSIs and add their provisioned capacity values to your variables as well.</p>
- *                   </li>
+ *                         <p>If the table has one or more global secondary indexes (GSIs), loop
+ *                             over these GSIs and add their provisioned capacity values to your
+ *                             variables as well.</p>
+ *                     </li>
  *                </ul>
  *             </li>
  *             <li>
- *                <p>Report the account quotas for that Region returned by <code>DescribeLimits</code>, along with
- *                     the total current provisioned capacity levels you have calculated.</p>
+ *                 <p>Report the account quotas for that Region returned by
+ *                         <code>DescribeLimits</code>, along with the total current provisioned
+ *                     capacity levels you have calculated.</p>
  *             </li>
  *          </ol>
  *
- *          <p>This will let you see whether you are getting close to your account-level quotas.</p>
- *          <p>The per-table quotas apply only when you are creating a new table. They restrict the sum
- *             of the provisioned capacity of the new table itself and all its global secondary
+ *         <p>This will let you see whether you are getting close to your account-level
+ *             quotas.</p>
+ *         <p>The per-table quotas apply only when you are creating a new table. They restrict the
+ *             sum of the provisioned capacity of the new table itself and all its global secondary
  *             indexes.</p>
- *          <p>For existing tables and their GSIs, DynamoDB doesn't let you increase provisioned
+ *         <p>For existing tables and their GSIs, DynamoDB doesn't let you increase provisioned
  *             capacity extremely rapidly, but the only quota that applies is that the aggregate
  *             provisioned capacity over all your tables and GSIs cannot exceed either of the
  *             per-account quotas.</p>
- *          <note>
+ *         <note>
  *             <p>
- *                <code>DescribeLimits</code> should only be called periodically. You can expect throttling
- *         errors if you call it more than once in a minute.</p>
- *          </note>
- *          <p>The <code>DescribeLimits</code> Request element has no content.</p>
+ *                 <code>DescribeLimits</code> should only be called periodically. You can expect
+ *                 throttling errors if you call it more than once in a minute.</p>
+ *         </note>
+ *         <p>The <code>DescribeLimits</code> Request element has no content.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -83,7 +93,7 @@ export interface DescribeLimitsCommandOutput extends DescribeLimitsOutput, __Met
  *
  * @see {@link DescribeLimitsCommandInput} for command's `input` shape.
  * @see {@link DescribeLimitsCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class DescribeLimitsCommand extends $Command<DescribeLimitsCommandInput, DescribeLimitsCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/DescribeTableCommand.d.ts

@@ -7,13 +7,16 @@ export interface DescribeTableCommandInput extends DescribeTableInput {
 export interface DescribeTableCommandOutput extends DescribeTableOutput, __MetadataBearer {
 }
 /**
- * <p>Returns information about the table, including the current status of the table, when it was created, the primary key schema, and any indexes on the table.</p>
- *          <note>
- *             <p>If you issue a <code>DescribeTable</code> request immediately after a <code>CreateTable</code> request, DynamoDB might
- *         return a <code>ResourceNotFoundException</code>. This is because <code>DescribeTable</code> uses an eventually
- *         consistent query, and the metadata for your table might not be available at that moment.
- *         Wait for a few seconds, and then try the <code>DescribeTable</code> request again.</p>
- *          </note>
+ * <p>Returns information about the table, including the current status of the table, when
+ *             it was created, the primary key schema, and any indexes on the table.</p>
+ *         <note>
+ *             <p>If you issue a <code>DescribeTable</code> request immediately after a
+ *                     <code>CreateTable</code> request, DynamoDB might return a
+ *                     <code>ResourceNotFoundException</code>. This is because
+ *                     <code>DescribeTable</code> uses an eventually consistent query, and the metadata
+ *                 for your table might not be available at that moment. Wait for a few seconds, and
+ *                 then try the <code>DescribeTable</code> request again.</p>
+ *         </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -26,7 +29,7 @@ export interface DescribeTableCommandOutput extends DescribeTableOutput, __Metad
  *
  * @see {@link DescribeTableCommandInput} for command's `input` shape.
  * @see {@link DescribeTableCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class DescribeTableCommand extends $Command<DescribeTableCommandInput, DescribeTableCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/DescribeTableReplicaAutoScalingCommand.d.ts

@@ -8,9 +8,10 @@ export interface DescribeTableReplicaAutoScalingCommandOutput extends DescribeTa
 }
 /**
  * <p>Describes auto scaling settings across replicas of the global table at once.</p>
- *          <note>
- *             <p>This operation only applies to <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V2.html">Version 2019.11.21</a> of global tables.</p>
- *          </note>
+ *         <note>
+ *             <p>This operation only applies to <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/globaltables.V2.html">Version
+ *                     2019.11.21</a> of global tables.</p>
+ *         </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -23,7 +24,7 @@ export interface DescribeTableReplicaAutoScalingCommandOutput extends DescribeTa
  *
  * @see {@link DescribeTableReplicaAutoScalingCommandInput} for command's `input` shape.
  * @see {@link DescribeTableReplicaAutoScalingCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class DescribeTableReplicaAutoScalingCommand extends $Command<DescribeTableReplicaAutoScalingCommandInput, DescribeTableReplicaAutoScalingCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/DescribeTimeToLiveCommand.d.ts

@@ -20,7 +20,7 @@ export interface DescribeTimeToLiveCommandOutput extends DescribeTimeToLiveOutpu
  *
  * @see {@link DescribeTimeToLiveCommandInput} for command's `input` shape.
  * @see {@link DescribeTimeToLiveCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class DescribeTimeToLiveCommand extends $Command<DescribeTimeToLiveCommandInput, DescribeTimeToLiveCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/DisableKinesisStreamingDestinationCommand.d.ts

@@ -21,7 +21,7 @@ export interface DisableKinesisStreamingDestinationCommandOutput extends Kinesis
  *
  * @see {@link DisableKinesisStreamingDestinationCommandInput} for command's `input` shape.
  * @see {@link DisableKinesisStreamingDestinationCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class DisableKinesisStreamingDestinationCommand extends $Command<DisableKinesisStreamingDestinationCommandInput, DisableKinesisStreamingDestinationCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/EnableKinesisStreamingDestinationCommand.d.ts

@@ -7,10 +7,10 @@ export interface EnableKinesisStreamingDestinationCommandInput extends KinesisSt
 export interface EnableKinesisStreamingDestinationCommandOutput extends KinesisStreamingDestinationOutput, __MetadataBearer {
 }
 /**
- * <p>Starts table data replication to the specified Kinesis data stream at a timestamp chosen
- *             during the enable workflow. If this operation doesn't return results immediately, use
- *             DescribeKinesisStreamingDestination to check if streaming to the Kinesis data stream is
- *             ACTIVE.</p>
+ * <p>Starts table data replication to the specified Kinesis data stream at a timestamp
+ *             chosen during the enable workflow. If this operation doesn't return results immediately,
+ *             use DescribeKinesisStreamingDestination to check if streaming to the Kinesis data stream
+ *             is ACTIVE.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -23,7 +23,7 @@ export interface EnableKinesisStreamingDestinationCommandOutput extends KinesisS
  *
  * @see {@link EnableKinesisStreamingDestinationCommandInput} for command's `input` shape.
  * @see {@link EnableKinesisStreamingDestinationCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class EnableKinesisStreamingDestinationCommand extends $Command<EnableKinesisStreamingDestinationCommandInput, EnableKinesisStreamingDestinationCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/ExecuteStatementCommand.d.ts

@@ -7,9 +7,8 @@ export interface ExecuteStatementCommandInput extends ExecuteStatementInput {
 export interface ExecuteStatementCommandOutput extends ExecuteStatementOutput, __MetadataBearer {
 }
 /**
- * <p>
- * This operation allows you to perform reads and singleton writes on data stored in DynamoDB, using PartiQL.
- * </p>
+ * <p>This operation allows you to perform reads and singleton writes on data stored in
+ *             DynamoDB, using PartiQL.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -22,7 +21,7 @@ export interface ExecuteStatementCommandOutput extends ExecuteStatementOutput, _
  *
  * @see {@link ExecuteStatementCommandInput} for command's `input` shape.
  * @see {@link ExecuteStatementCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class ExecuteStatementCommand extends $Command<ExecuteStatementCommandInput, ExecuteStatementCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/ExecuteTransactionCommand.d.ts

@@ -7,9 +7,14 @@ export interface ExecuteTransactionCommandInput extends ExecuteTransactionInput
 export interface ExecuteTransactionCommandOutput extends ExecuteTransactionOutput, __MetadataBearer {
 }
 /**
- * <p>
- * This operation allows you to perform transactional reads or writes on data stored in DynamoDB, using PartiQL.
- * </p>
+ * <p>This operation allows you to perform transactional reads or writes on data stored in
+ *             DynamoDB, using PartiQL.</p>
+ *         <note>
+ *             <p>The entire transaction must consist of either read statements or write statements,
+ *                 you cannot mix both in one transaction. The EXISTS function is an exception and can
+ *                 be used to check the condition of specific attributes of the item in a similar
+ *                 manner to <code>ConditionCheck</code> in the <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/transaction-apis.html#transaction-apis-txwriteitems">TransactWriteItems</a> API.</p>
+ *         </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -22,7 +27,7 @@ export interface ExecuteTransactionCommandOutput extends ExecuteTransactionOutpu
  *
  * @see {@link ExecuteTransactionCommandInput} for command's `input` shape.
  * @see {@link ExecuteTransactionCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class ExecuteTransactionCommand extends $Command<ExecuteTransactionCommandInput, ExecuteTransactionCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/ExportTableToPointInTimeCommand.d.ts

@@ -22,7 +22,7 @@ export interface ExportTableToPointInTimeCommandOutput extends ExportTableToPoin
  *
  * @see {@link ExportTableToPointInTimeCommandInput} for command's `input` shape.
  * @see {@link ExportTableToPointInTimeCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class ExportTableToPointInTimeCommand extends $Command<ExportTableToPointInTimeCommandInput, ExportTableToPointInTimeCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/GetItemCommand.d.ts

@@ -7,13 +7,14 @@ export interface GetItemCommandInput extends GetItemInput {
 export interface GetItemCommandOutput extends GetItemOutput, __MetadataBearer {
 }
 /**
- * <p>The <code>GetItem</code> operation returns a set of attributes for the item with the given primary
- *           key. If there is no matching item, <code>GetItem</code> does not return any data and there will be no <code>Item</code> element in the response.</p>
- *          <p>
- *             <code>GetItem</code> provides an eventually consistent read by default. If your application
- *       requires a strongly consistent read, set <code>ConsistentRead</code> to <code>true</code>. Although
- *       a strongly consistent read might take more time than an eventually consistent read, it always
- *       returns the last updated value.</p>
+ * <p>The <code>GetItem</code> operation returns a set of attributes for the item with the
+ *             given primary key. If there is no matching item, <code>GetItem</code> does not return
+ *             any data and there will be no <code>Item</code> element in the response.</p>
+ *         <p>
+ *             <code>GetItem</code> provides an eventually consistent read by default. If your
+ *             application requires a strongly consistent read, set <code>ConsistentRead</code> to
+ *                 <code>true</code>. Although a strongly consistent read might take more time than an
+ *             eventually consistent read, it always returns the last updated value.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -26,7 +27,7 @@ export interface GetItemCommandOutput extends GetItemOutput, __MetadataBearer {
  *
  * @see {@link GetItemCommandInput} for command's `input` shape.
  * @see {@link GetItemCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class GetItemCommand extends $Command<GetItemCommandInput, GetItemCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/ListBackupsCommand.d.ts

@@ -7,13 +7,13 @@ export interface ListBackupsCommandInput extends ListBackupsInput {
 export interface ListBackupsCommandOutput extends ListBackupsOutput, __MetadataBearer {
 }
 /**
- * <p>List backups associated with an AWS account. To list backups for a given table, specify
- *                 <code>TableName</code>. <code>ListBackups</code> returns a paginated list of results
- *             with at most 1 MB worth of items in a page. You can also specify a maximum number of
- *             entries to be returned in a page. </p>
- *          <p>In the request, start time is inclusive, but end time is exclusive. Note that these
+ * <p>List backups associated with an Amazon Web Services account. To list backups for a
+ *             given table, specify <code>TableName</code>. <code>ListBackups</code> returns a
+ *             paginated list of results with at most 1 MB worth of items in a page. You can also
+ *             specify a maximum number of entries to be returned in a page.</p>
+ *         <p>In the request, start time is inclusive, but end time is exclusive. Note that these
  *             boundaries are for the time at which the original backup was requested.</p>
- *          <p>You can call <code>ListBackups</code> a maximum of five times per second.</p>
+ *         <p>You can call <code>ListBackups</code> a maximum of five times per second.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -26,7 +26,7 @@ export interface ListBackupsCommandOutput extends ListBackupsOutput, __MetadataB
  *
  * @see {@link ListBackupsCommandInput} for command's `input` shape.
  * @see {@link ListBackupsCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class ListBackupsCommand extends $Command<ListBackupsCommandInput, ListBackupsCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/ListContributorInsightsCommand.d.ts

@@ -7,7 +7,8 @@ export interface ListContributorInsightsCommandInput extends ListContributorInsi
 export interface ListContributorInsightsCommandOutput extends ListContributorInsightsOutput, __MetadataBearer {
 }
 /**
- * <p>Returns a list of ContributorInsightsSummary for a table and all its global secondary indexes.</p>
+ * <p>Returns a list of ContributorInsightsSummary for a table and all its global secondary
+ *             indexes.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -20,7 +21,7 @@ export interface ListContributorInsightsCommandOutput extends ListContributorIns
  *
  * @see {@link ListContributorInsightsCommandInput} for command's `input` shape.
  * @see {@link ListContributorInsightsCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class ListContributorInsightsCommand extends $Command<ListContributorInsightsCommandInput, ListContributorInsightsCommandOutput, DynamoDBClientResolvedConfig> {

package/dist-types/commands/ListExportsCommand.d.ts

@@ -20,7 +20,7 @@ export interface ListExportsCommandOutput extends ListExportsOutput, __MetadataB
  *
  * @see {@link ListExportsCommandInput} for command's `input` shape.
  * @see {@link ListExportsCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for DynamoDBClient's `config` shape.
  *
  */
 export declare class ListExportsCommand extends $Command<ListExportsCommandInput, ListExportsCommandOutput, DynamoDBClientResolvedConfig> {