@aws-sdk/client-dynamodb 3.34.0 → 3.35.0

package/commands/TransactWriteItemsCommand.ts

@@ -1,167 +0,0 @@
-import { DynamoDBClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../DynamoDBClient";
-import { TransactWriteItemsInput, TransactWriteItemsOutput } from "../models/models_0";
-import {
-  deserializeAws_json1_0TransactWriteItemsCommand,
-  serializeAws_json1_0TransactWriteItemsCommand,
-} from "../protocols/Aws_json1_0";
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  MiddlewareStack,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-export interface TransactWriteItemsCommandInput extends TransactWriteItemsInput {}
-export interface TransactWriteItemsCommandOutput extends TransactWriteItemsOutput, __MetadataBearer {}
-
-/**
- * <p>
- *             <code>TransactWriteItems</code> is a synchronous write operation that groups up to 25
- *             action requests. These actions can target items in different tables, but not in
- *             different AWS accounts or Regions, and no two actions can target the same item. For
- *             example, you cannot both <code>ConditionCheck</code> and <code>Update</code> the same
- *             item. The aggregate size of the items in the transaction cannot exceed 4 MB.</p>
- *
- *          <p>The actions are completed atomically so that either all of
- *         them succeed, or all of them fail. They are defined by the following objects:</p>
- *
- *          <ul>
- *             <li>
- *                <p>
- *                   <code>Put</code>  —   Initiates a <code>PutItem</code> operation to write a new
- *                     item. This structure specifies the primary key of the item to be written, the
- *                     name of the table to write it in, an optional condition expression that must be
- *                     satisfied for the write to succeed, a list of the item's attributes, and a field
- *                     indicating whether to retrieve the item's attributes if the condition is not
- *                     met.</p>
- *             </li>
- *             <li>
- *                <p>
- *                   <code>Update</code>  —   Initiates an <code>UpdateItem</code> operation to
- *                     update an existing item. This structure specifies the primary key of the item to
- *                     be updated, the name of the table where it resides, an optional condition
- *                     expression that must be satisfied for the update to succeed, an expression that
- *                     defines one or more attributes to be updated, and a field indicating whether to
- *                     retrieve the item's attributes if the condition is not met.</p>
- *             </li>
- *             <li>
- *                <p>
- *                   <code>Delete</code>  —   Initiates a <code>DeleteItem</code> operation to
- *                     delete an existing item. This structure specifies the primary key of the item to
- *                     be deleted, the name of the table where it resides, an optional condition
- *                     expression that must be satisfied for the deletion to succeed, and a field
- *                     indicating whether to retrieve the item's attributes if the condition is not
- *                     met.</p>
- *             </li>
- *             <li>
- *                <p>
- *                   <code>ConditionCheck</code>  —   Applies a condition to an item that is not
- *                     being modified by the transaction. This structure specifies the primary key of
- *                     the item to be checked, the name of the table where it resides, a condition
- *                     expression that must be satisfied for the transaction to succeed, and a field
- *                     indicating whether to retrieve the item's attributes if the condition is not
- *                     met.</p>
- *             </li>
- *          </ul>
- *
- *          <p>DynamoDB rejects the entire <code>TransactWriteItems</code> request if any of the following is true:</p>
- *          <ul>
- *             <li>
- *                <p>A condition in one of the condition expressions is not met.</p>
- *             </li>
- *             <li>
- *                <p>An ongoing operation is in the process of updating the same
- *           item.</p>
- *             </li>
- *             <li>
- *                <p>There is insufficient provisioned capacity for the transaction
- *           to be completed.</p>
- *             </li>
- *             <li>
- *                <p>An item size becomes too large (bigger than 400 KB), a local secondary index (LSI) becomes too
- *                     large, or a similar validation error occurs because of changes made by the
- *                     transaction.</p>
- *             </li>
- *             <li>
- *                <p>The aggregate size of the items in the transaction exceeds 4 MB.</p>
- *             </li>
- *             <li>
- *                <p>There  is a user error, such as an invalid data format.</p>
- *             </li>
- *          </ul>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { DynamoDBClient, TransactWriteItemsCommand } from "@aws-sdk/client-dynamodb"; // ES Modules import
- * // const { DynamoDBClient, TransactWriteItemsCommand } = require("@aws-sdk/client-dynamodb"); // CommonJS import
- * const client = new DynamoDBClient(config);
- * const command = new TransactWriteItemsCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link TransactWriteItemsCommandInput} for command's `input` shape.
- * @see {@link TransactWriteItemsCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class TransactWriteItemsCommand extends $Command<
-  TransactWriteItemsCommandInput,
-  TransactWriteItemsCommandOutput,
-  DynamoDBClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: TransactWriteItemsCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: DynamoDBClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<TransactWriteItemsCommandInput, TransactWriteItemsCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "DynamoDBClient";
-    const commandName = "TransactWriteItemsCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: TransactWriteItemsInput.filterSensitiveLog,
-      outputFilterSensitiveLog: TransactWriteItemsOutput.filterSensitiveLog,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: TransactWriteItemsCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_0TransactWriteItemsCommand(input, context);
-  }
-
-  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<TransactWriteItemsCommandOutput> {
-    return deserializeAws_json1_0TransactWriteItemsCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}

package/commands/UntagResourceCommand.ts

@@ -1,98 +0,0 @@
-import { DynamoDBClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../DynamoDBClient";
-import { UntagResourceInput } from "../models/models_0";
-import {
-  deserializeAws_json1_0UntagResourceCommand,
-  serializeAws_json1_0UntagResourceCommand,
-} from "../protocols/Aws_json1_0";
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  MiddlewareStack,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-export interface UntagResourceCommandInput extends UntagResourceInput {}
-export interface UntagResourceCommandOutput extends __MetadataBearer {}
-
-/**
- * <p>Removes the association of tags from an Amazon DynamoDB resource. You can call
- *                 <code>UntagResource</code> up to five times per second, per account. </p>
- *          <p>For an overview on tagging DynamoDB resources, see
- *       <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Tagging.html">Tagging for DynamoDB</a>
- *       in the <i>Amazon DynamoDB Developer Guide</i>.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { DynamoDBClient, UntagResourceCommand } from "@aws-sdk/client-dynamodb"; // ES Modules import
- * // const { DynamoDBClient, UntagResourceCommand } = require("@aws-sdk/client-dynamodb"); // CommonJS import
- * const client = new DynamoDBClient(config);
- * const command = new UntagResourceCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link UntagResourceCommandInput} for command's `input` shape.
- * @see {@link UntagResourceCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class UntagResourceCommand extends $Command<
-  UntagResourceCommandInput,
-  UntagResourceCommandOutput,
-  DynamoDBClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: UntagResourceCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: DynamoDBClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<UntagResourceCommandInput, UntagResourceCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "DynamoDBClient";
-    const commandName = "UntagResourceCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: UntagResourceInput.filterSensitiveLog,
-      outputFilterSensitiveLog: (output: any) => output,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: UntagResourceCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_0UntagResourceCommand(input, context);
-  }
-
-  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<UntagResourceCommandOutput> {
-    return deserializeAws_json1_0UntagResourceCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}

package/commands/UpdateContinuousBackupsCommand.ts

@@ -1,105 +0,0 @@
-import { DynamoDBClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../DynamoDBClient";
-import { UpdateContinuousBackupsInput, UpdateContinuousBackupsOutput } from "../models/models_0";
-import {
-  deserializeAws_json1_0UpdateContinuousBackupsCommand,
-  serializeAws_json1_0UpdateContinuousBackupsCommand,
-} from "../protocols/Aws_json1_0";
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  MiddlewareStack,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-export interface UpdateContinuousBackupsCommandInput extends UpdateContinuousBackupsInput {}
-export interface UpdateContinuousBackupsCommandOutput extends UpdateContinuousBackupsOutput, __MetadataBearer {}
-
-/**
- * <p>
- *             <code>UpdateContinuousBackups</code> enables or disables point in time recovery for the specified table.
- *       A successful <code>UpdateContinuousBackups</code> call returns the current <code>ContinuousBackupsDescription</code>.
- *       Continuous backups are <code>ENABLED</code> on all tables at table creation.
- *       If point in time recovery is enabled, <code>PointInTimeRecoveryStatus</code> will be set to ENABLED.</p>
- *          <p>
- *       Once continuous backups and point in time recovery are enabled, you can restore to any point in time within
- *       <code>EarliestRestorableDateTime</code> and <code>LatestRestorableDateTime</code>.
- *      </p>
- *          <p>
- *             <code>LatestRestorableDateTime</code> is typically 5 minutes before the current time.
- *             You can restore your table to any point in time during the last 35 days. </p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { DynamoDBClient, UpdateContinuousBackupsCommand } from "@aws-sdk/client-dynamodb"; // ES Modules import
- * // const { DynamoDBClient, UpdateContinuousBackupsCommand } = require("@aws-sdk/client-dynamodb"); // CommonJS import
- * const client = new DynamoDBClient(config);
- * const command = new UpdateContinuousBackupsCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link UpdateContinuousBackupsCommandInput} for command's `input` shape.
- * @see {@link UpdateContinuousBackupsCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class UpdateContinuousBackupsCommand extends $Command<
-  UpdateContinuousBackupsCommandInput,
-  UpdateContinuousBackupsCommandOutput,
-  DynamoDBClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: UpdateContinuousBackupsCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: DynamoDBClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<UpdateContinuousBackupsCommandInput, UpdateContinuousBackupsCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "DynamoDBClient";
-    const commandName = "UpdateContinuousBackupsCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: UpdateContinuousBackupsInput.filterSensitiveLog,
-      outputFilterSensitiveLog: UpdateContinuousBackupsOutput.filterSensitiveLog,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: UpdateContinuousBackupsCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_0UpdateContinuousBackupsCommand(input, context);
-  }
-
-  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<UpdateContinuousBackupsCommandOutput> {
-    return deserializeAws_json1_0UpdateContinuousBackupsCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}

package/commands/UpdateContributorInsightsCommand.ts

@@ -1,97 +0,0 @@
-import { DynamoDBClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../DynamoDBClient";
-import { UpdateContributorInsightsInput, UpdateContributorInsightsOutput } from "../models/models_0";
-import {
-  deserializeAws_json1_0UpdateContributorInsightsCommand,
-  serializeAws_json1_0UpdateContributorInsightsCommand,
-} from "../protocols/Aws_json1_0";
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  MiddlewareStack,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-export interface UpdateContributorInsightsCommandInput extends UpdateContributorInsightsInput {}
-export interface UpdateContributorInsightsCommandOutput extends UpdateContributorInsightsOutput, __MetadataBearer {}
-
-/**
- * <p>Updates the status for contributor insights for a specific table or index.</p>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { DynamoDBClient, UpdateContributorInsightsCommand } from "@aws-sdk/client-dynamodb"; // ES Modules import
- * // const { DynamoDBClient, UpdateContributorInsightsCommand } = require("@aws-sdk/client-dynamodb"); // CommonJS import
- * const client = new DynamoDBClient(config);
- * const command = new UpdateContributorInsightsCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link UpdateContributorInsightsCommandInput} for command's `input` shape.
- * @see {@link UpdateContributorInsightsCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class UpdateContributorInsightsCommand extends $Command<
-  UpdateContributorInsightsCommandInput,
-  UpdateContributorInsightsCommandOutput,
-  DynamoDBClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: UpdateContributorInsightsCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: DynamoDBClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<UpdateContributorInsightsCommandInput, UpdateContributorInsightsCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "DynamoDBClient";
-    const commandName = "UpdateContributorInsightsCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: UpdateContributorInsightsInput.filterSensitiveLog,
-      outputFilterSensitiveLog: UpdateContributorInsightsOutput.filterSensitiveLog,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: UpdateContributorInsightsCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_0UpdateContributorInsightsCommand(input, context);
-  }
-
-  private deserialize(
-    output: __HttpResponse,
-    context: __SerdeContext
-  ): Promise<UpdateContributorInsightsCommandOutput> {
-    return deserializeAws_json1_0UpdateContributorInsightsCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}

package/commands/UpdateGlobalTableCommand.ts

@@ -1,122 +0,0 @@
-import { DynamoDBClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../DynamoDBClient";
-import { UpdateGlobalTableInput, UpdateGlobalTableOutput } from "../models/models_0";
-import {
-  deserializeAws_json1_0UpdateGlobalTableCommand,
-  serializeAws_json1_0UpdateGlobalTableCommand,
-} from "../protocols/Aws_json1_0";
-import { getSerdePlugin } from "@aws-sdk/middleware-serde";
-import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
-import { Command as $Command } from "@aws-sdk/smithy-client";
-import {
-  FinalizeHandlerArguments,
-  Handler,
-  HandlerExecutionContext,
-  MiddlewareStack,
-  HttpHandlerOptions as __HttpHandlerOptions,
-  MetadataBearer as __MetadataBearer,
-  SerdeContext as __SerdeContext,
-} from "@aws-sdk/types";
-
-export interface UpdateGlobalTableCommandInput extends UpdateGlobalTableInput {}
-export interface UpdateGlobalTableCommandOutput extends UpdateGlobalTableOutput, __MetadataBearer {}
-
-/**
- * <p>Adds or removes replicas in the specified global table. The global table must already
- *             exist to be able to use this operation. Any replica to be added must be empty, have the
- *             same name as the global table, have the same key schema, have DynamoDB Streams enabled,
- *             and have the same provisioned and maximum write capacity units.</p>
- *         <note>
- *             <p>Although you can use <code>UpdateGlobalTable</code> to add replicas and remove replicas in
- *                 a single request, for simplicity we recommend that you issue separate requests for
- *                 adding or removing replicas.</p>
- *          </note>
- *        	<p>
- *         If global secondary indexes are specified, then the following conditions must also be met:
- *         </p>
- *         <ul>
- *             <li>
- *                <p>
- *                The global secondary indexes must have the same name.
- *             </p>
- *             </li>
- *             <li>
- *                <p>
- *                The global secondary indexes must have the same hash key and sort key (if present).
- *             </p>
- *             </li>
- *             <li>
- *                <p>
- *                The global secondary indexes must have the same provisioned and maximum write capacity units.
- *             </p>
- *             </li>
- *          </ul>
- * @example
- * Use a bare-bones client and the command you need to make an API call.
- * ```javascript
- * import { DynamoDBClient, UpdateGlobalTableCommand } from "@aws-sdk/client-dynamodb"; // ES Modules import
- * // const { DynamoDBClient, UpdateGlobalTableCommand } = require("@aws-sdk/client-dynamodb"); // CommonJS import
- * const client = new DynamoDBClient(config);
- * const command = new UpdateGlobalTableCommand(input);
- * const response = await client.send(command);
- * ```
- *
- * @see {@link UpdateGlobalTableCommandInput} for command's `input` shape.
- * @see {@link UpdateGlobalTableCommandOutput} for command's `response` shape.
- * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
- *
- */
-export class UpdateGlobalTableCommand extends $Command<
-  UpdateGlobalTableCommandInput,
-  UpdateGlobalTableCommandOutput,
-  DynamoDBClientResolvedConfig
-> {
-  // Start section: command_properties
-  // End section: command_properties
-
-  constructor(readonly input: UpdateGlobalTableCommandInput) {
-    // Start section: command_constructor
-    super();
-    // End section: command_constructor
-  }
-
-  /**
-   * @internal
-   */
-  resolveMiddleware(
-    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
-    configuration: DynamoDBClientResolvedConfig,
-    options?: __HttpHandlerOptions
-  ): Handler<UpdateGlobalTableCommandInput, UpdateGlobalTableCommandOutput> {
-    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
-
-    const stack = clientStack.concat(this.middlewareStack);
-
-    const { logger } = configuration;
-    const clientName = "DynamoDBClient";
-    const commandName = "UpdateGlobalTableCommand";
-    const handlerExecutionContext: HandlerExecutionContext = {
-      logger,
-      clientName,
-      commandName,
-      inputFilterSensitiveLog: UpdateGlobalTableInput.filterSensitiveLog,
-      outputFilterSensitiveLog: UpdateGlobalTableOutput.filterSensitiveLog,
-    };
-    const { requestHandler } = configuration;
-    return stack.resolve(
-      (request: FinalizeHandlerArguments<any>) =>
-        requestHandler.handle(request.request as __HttpRequest, options || {}),
-      handlerExecutionContext
-    );
-  }
-
-  private serialize(input: UpdateGlobalTableCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
-    return serializeAws_json1_0UpdateGlobalTableCommand(input, context);
-  }
-
-  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<UpdateGlobalTableCommandOutput> {
-    return deserializeAws_json1_0UpdateGlobalTableCommand(output, context);
-  }
-
-  // Start section: command_body_extra
-  // End section: command_body_extra
-}