@aws-sdk/client-dynamodb 3.31.0 → 3.35.0

package/src/commands/TransactWriteItemsCommand.ts

@@ -0,0 +1,168 @@
+import { getSerdePlugin } from "@aws-sdk/middleware-serde";
+import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
+import { Command as $Command } from "@aws-sdk/smithy-client";
+import {
+  FinalizeHandlerArguments,
+  Handler,
+  HandlerExecutionContext,
+  HttpHandlerOptions as __HttpHandlerOptions,
+  MetadataBearer as __MetadataBearer,
+  MiddlewareStack,
+  SerdeContext as __SerdeContext,
+} from "@aws-sdk/types";
+
+import { DynamoDBClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../DynamoDBClient";
+import { TransactWriteItemsInput, TransactWriteItemsOutput } from "../models/models_0";
+import {
+  deserializeAws_json1_0TransactWriteItemsCommand,
+  serializeAws_json1_0TransactWriteItemsCommand,
+} from "../protocols/Aws_json1_0";
+
+export interface TransactWriteItemsCommandInput extends TransactWriteItemsInput {}
+export interface TransactWriteItemsCommandOutput extends TransactWriteItemsOutput, __MetadataBearer {}
+
+/**
+ * <p>
+ *             <code>TransactWriteItems</code> is a synchronous write operation that groups up to 25
+ *             action requests. These actions can target items in different tables, but not in
+ *             different AWS accounts or Regions, and no two actions can target the same item. For
+ *             example, you cannot both <code>ConditionCheck</code> and <code>Update</code> the same
+ *             item. The aggregate size of the items in the transaction cannot exceed 4 MB.</p>
+ *
+ *          <p>The actions are completed atomically so that either all of
+ *         them succeed, or all of them fail. They are defined by the following objects:</p>
+ *
+ *          <ul>
+ *             <li>
+ *                <p>
+ *                   <code>Put</code>  —   Initiates a <code>PutItem</code> operation to write a new
+ *                     item. This structure specifies the primary key of the item to be written, the
+ *                     name of the table to write it in, an optional condition expression that must be
+ *                     satisfied for the write to succeed, a list of the item's attributes, and a field
+ *                     indicating whether to retrieve the item's attributes if the condition is not
+ *                     met.</p>
+ *             </li>
+ *             <li>
+ *                <p>
+ *                   <code>Update</code>  —   Initiates an <code>UpdateItem</code> operation to
+ *                     update an existing item. This structure specifies the primary key of the item to
+ *                     be updated, the name of the table where it resides, an optional condition
+ *                     expression that must be satisfied for the update to succeed, an expression that
+ *                     defines one or more attributes to be updated, and a field indicating whether to
+ *                     retrieve the item's attributes if the condition is not met.</p>
+ *             </li>
+ *             <li>
+ *                <p>
+ *                   <code>Delete</code>  —   Initiates a <code>DeleteItem</code> operation to
+ *                     delete an existing item. This structure specifies the primary key of the item to
+ *                     be deleted, the name of the table where it resides, an optional condition
+ *                     expression that must be satisfied for the deletion to succeed, and a field
+ *                     indicating whether to retrieve the item's attributes if the condition is not
+ *                     met.</p>
+ *             </li>
+ *             <li>
+ *                <p>
+ *                   <code>ConditionCheck</code>  —   Applies a condition to an item that is not
+ *                     being modified by the transaction. This structure specifies the primary key of
+ *                     the item to be checked, the name of the table where it resides, a condition
+ *                     expression that must be satisfied for the transaction to succeed, and a field
+ *                     indicating whether to retrieve the item's attributes if the condition is not
+ *                     met.</p>
+ *             </li>
+ *          </ul>
+ *
+ *          <p>DynamoDB rejects the entire <code>TransactWriteItems</code> request if any of the following is true:</p>
+ *          <ul>
+ *             <li>
+ *                <p>A condition in one of the condition expressions is not met.</p>
+ *             </li>
+ *             <li>
+ *                <p>An ongoing operation is in the process of updating the same
+ *           item.</p>
+ *             </li>
+ *             <li>
+ *                <p>There is insufficient provisioned capacity for the transaction
+ *           to be completed.</p>
+ *             </li>
+ *             <li>
+ *                <p>An item size becomes too large (bigger than 400 KB), a local secondary index (LSI) becomes too
+ *                     large, or a similar validation error occurs because of changes made by the
+ *                     transaction.</p>
+ *             </li>
+ *             <li>
+ *                <p>The aggregate size of the items in the transaction exceeds 4 MB.</p>
+ *             </li>
+ *             <li>
+ *                <p>There  is a user error, such as an invalid data format.</p>
+ *             </li>
+ *          </ul>
+ * @example
+ * Use a bare-bones client and the command you need to make an API call.
+ * ```javascript
+ * import { DynamoDBClient, TransactWriteItemsCommand } from "@aws-sdk/client-dynamodb"; // ES Modules import
+ * // const { DynamoDBClient, TransactWriteItemsCommand } = require("@aws-sdk/client-dynamodb"); // CommonJS import
+ * const client = new DynamoDBClient(config);
+ * const command = new TransactWriteItemsCommand(input);
+ * const response = await client.send(command);
+ * ```
+ *
+ * @see {@link TransactWriteItemsCommandInput} for command's `input` shape.
+ * @see {@link TransactWriteItemsCommandOutput} for command's `response` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ *
+ */
+export class TransactWriteItemsCommand extends $Command<
+  TransactWriteItemsCommandInput,
+  TransactWriteItemsCommandOutput,
+  DynamoDBClientResolvedConfig
+> {
+  // Start section: command_properties
+  // End section: command_properties
+
+  constructor(readonly input: TransactWriteItemsCommandInput) {
+    // Start section: command_constructor
+    super();
+    // End section: command_constructor
+  }
+
+  /**
+   * @internal
+   */
+  resolveMiddleware(
+    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
+    configuration: DynamoDBClientResolvedConfig,
+    options?: __HttpHandlerOptions
+  ): Handler<TransactWriteItemsCommandInput, TransactWriteItemsCommandOutput> {
+    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
+
+    const stack = clientStack.concat(this.middlewareStack);
+
+    const { logger } = configuration;
+    const clientName = "DynamoDBClient";
+    const commandName = "TransactWriteItemsCommand";
+    const handlerExecutionContext: HandlerExecutionContext = {
+      logger,
+      clientName,
+      commandName,
+      inputFilterSensitiveLog: TransactWriteItemsInput.filterSensitiveLog,
+      outputFilterSensitiveLog: TransactWriteItemsOutput.filterSensitiveLog,
+    };
+    const { requestHandler } = configuration;
+    return stack.resolve(
+      (request: FinalizeHandlerArguments<any>) =>
+        requestHandler.handle(request.request as __HttpRequest, options || {}),
+      handlerExecutionContext
+    );
+  }
+
+  private serialize(input: TransactWriteItemsCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
+    return serializeAws_json1_0TransactWriteItemsCommand(input, context);
+  }
+
+  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<TransactWriteItemsCommandOutput> {
+    return deserializeAws_json1_0TransactWriteItemsCommand(output, context);
+  }
+
+  // Start section: command_body_extra
+  // End section: command_body_extra
+}

package/src/commands/UntagResourceCommand.ts

@@ -0,0 +1,99 @@
+import { getSerdePlugin } from "@aws-sdk/middleware-serde";
+import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
+import { Command as $Command } from "@aws-sdk/smithy-client";
+import {
+  FinalizeHandlerArguments,
+  Handler,
+  HandlerExecutionContext,
+  HttpHandlerOptions as __HttpHandlerOptions,
+  MetadataBearer as __MetadataBearer,
+  MiddlewareStack,
+  SerdeContext as __SerdeContext,
+} from "@aws-sdk/types";
+
+import { DynamoDBClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../DynamoDBClient";
+import { UntagResourceInput } from "../models/models_0";
+import {
+  deserializeAws_json1_0UntagResourceCommand,
+  serializeAws_json1_0UntagResourceCommand,
+} from "../protocols/Aws_json1_0";
+
+export interface UntagResourceCommandInput extends UntagResourceInput {}
+export interface UntagResourceCommandOutput extends __MetadataBearer {}
+
+/**
+ * <p>Removes the association of tags from an Amazon DynamoDB resource. You can call
+ *                 <code>UntagResource</code> up to five times per second, per account. </p>
+ *          <p>For an overview on tagging DynamoDB resources, see
+ *       <a href="https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Tagging.html">Tagging for DynamoDB</a>
+ *       in the <i>Amazon DynamoDB Developer Guide</i>.</p>
+ * @example
+ * Use a bare-bones client and the command you need to make an API call.
+ * ```javascript
+ * import { DynamoDBClient, UntagResourceCommand } from "@aws-sdk/client-dynamodb"; // ES Modules import
+ * // const { DynamoDBClient, UntagResourceCommand } = require("@aws-sdk/client-dynamodb"); // CommonJS import
+ * const client = new DynamoDBClient(config);
+ * const command = new UntagResourceCommand(input);
+ * const response = await client.send(command);
+ * ```
+ *
+ * @see {@link UntagResourceCommandInput} for command's `input` shape.
+ * @see {@link UntagResourceCommandOutput} for command's `response` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ *
+ */
+export class UntagResourceCommand extends $Command<
+  UntagResourceCommandInput,
+  UntagResourceCommandOutput,
+  DynamoDBClientResolvedConfig
+> {
+  // Start section: command_properties
+  // End section: command_properties
+
+  constructor(readonly input: UntagResourceCommandInput) {
+    // Start section: command_constructor
+    super();
+    // End section: command_constructor
+  }
+
+  /**
+   * @internal
+   */
+  resolveMiddleware(
+    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
+    configuration: DynamoDBClientResolvedConfig,
+    options?: __HttpHandlerOptions
+  ): Handler<UntagResourceCommandInput, UntagResourceCommandOutput> {
+    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
+
+    const stack = clientStack.concat(this.middlewareStack);
+
+    const { logger } = configuration;
+    const clientName = "DynamoDBClient";
+    const commandName = "UntagResourceCommand";
+    const handlerExecutionContext: HandlerExecutionContext = {
+      logger,
+      clientName,
+      commandName,
+      inputFilterSensitiveLog: UntagResourceInput.filterSensitiveLog,
+      outputFilterSensitiveLog: (output: any) => output,
+    };
+    const { requestHandler } = configuration;
+    return stack.resolve(
+      (request: FinalizeHandlerArguments<any>) =>
+        requestHandler.handle(request.request as __HttpRequest, options || {}),
+      handlerExecutionContext
+    );
+  }
+
+  private serialize(input: UntagResourceCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
+    return serializeAws_json1_0UntagResourceCommand(input, context);
+  }
+
+  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<UntagResourceCommandOutput> {
+    return deserializeAws_json1_0UntagResourceCommand(output, context);
+  }
+
+  // Start section: command_body_extra
+  // End section: command_body_extra
+}

package/src/commands/UpdateContinuousBackupsCommand.ts

@@ -0,0 +1,106 @@
+import { getSerdePlugin } from "@aws-sdk/middleware-serde";
+import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
+import { Command as $Command } from "@aws-sdk/smithy-client";
+import {
+  FinalizeHandlerArguments,
+  Handler,
+  HandlerExecutionContext,
+  HttpHandlerOptions as __HttpHandlerOptions,
+  MetadataBearer as __MetadataBearer,
+  MiddlewareStack,
+  SerdeContext as __SerdeContext,
+} from "@aws-sdk/types";
+
+import { DynamoDBClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../DynamoDBClient";
+import { UpdateContinuousBackupsInput, UpdateContinuousBackupsOutput } from "../models/models_0";
+import {
+  deserializeAws_json1_0UpdateContinuousBackupsCommand,
+  serializeAws_json1_0UpdateContinuousBackupsCommand,
+} from "../protocols/Aws_json1_0";
+
+export interface UpdateContinuousBackupsCommandInput extends UpdateContinuousBackupsInput {}
+export interface UpdateContinuousBackupsCommandOutput extends UpdateContinuousBackupsOutput, __MetadataBearer {}
+
+/**
+ * <p>
+ *             <code>UpdateContinuousBackups</code> enables or disables point in time recovery for the specified table.
+ *       A successful <code>UpdateContinuousBackups</code> call returns the current <code>ContinuousBackupsDescription</code>.
+ *       Continuous backups are <code>ENABLED</code> on all tables at table creation.
+ *       If point in time recovery is enabled, <code>PointInTimeRecoveryStatus</code> will be set to ENABLED.</p>
+ *          <p>
+ *       Once continuous backups and point in time recovery are enabled, you can restore to any point in time within
+ *       <code>EarliestRestorableDateTime</code> and <code>LatestRestorableDateTime</code>.
+ *      </p>
+ *          <p>
+ *             <code>LatestRestorableDateTime</code> is typically 5 minutes before the current time.
+ *             You can restore your table to any point in time during the last 35 days. </p>
+ * @example
+ * Use a bare-bones client and the command you need to make an API call.
+ * ```javascript
+ * import { DynamoDBClient, UpdateContinuousBackupsCommand } from "@aws-sdk/client-dynamodb"; // ES Modules import
+ * // const { DynamoDBClient, UpdateContinuousBackupsCommand } = require("@aws-sdk/client-dynamodb"); // CommonJS import
+ * const client = new DynamoDBClient(config);
+ * const command = new UpdateContinuousBackupsCommand(input);
+ * const response = await client.send(command);
+ * ```
+ *
+ * @see {@link UpdateContinuousBackupsCommandInput} for command's `input` shape.
+ * @see {@link UpdateContinuousBackupsCommandOutput} for command's `response` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ *
+ */
+export class UpdateContinuousBackupsCommand extends $Command<
+  UpdateContinuousBackupsCommandInput,
+  UpdateContinuousBackupsCommandOutput,
+  DynamoDBClientResolvedConfig
+> {
+  // Start section: command_properties
+  // End section: command_properties
+
+  constructor(readonly input: UpdateContinuousBackupsCommandInput) {
+    // Start section: command_constructor
+    super();
+    // End section: command_constructor
+  }
+
+  /**
+   * @internal
+   */
+  resolveMiddleware(
+    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
+    configuration: DynamoDBClientResolvedConfig,
+    options?: __HttpHandlerOptions
+  ): Handler<UpdateContinuousBackupsCommandInput, UpdateContinuousBackupsCommandOutput> {
+    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
+
+    const stack = clientStack.concat(this.middlewareStack);
+
+    const { logger } = configuration;
+    const clientName = "DynamoDBClient";
+    const commandName = "UpdateContinuousBackupsCommand";
+    const handlerExecutionContext: HandlerExecutionContext = {
+      logger,
+      clientName,
+      commandName,
+      inputFilterSensitiveLog: UpdateContinuousBackupsInput.filterSensitiveLog,
+      outputFilterSensitiveLog: UpdateContinuousBackupsOutput.filterSensitiveLog,
+    };
+    const { requestHandler } = configuration;
+    return stack.resolve(
+      (request: FinalizeHandlerArguments<any>) =>
+        requestHandler.handle(request.request as __HttpRequest, options || {}),
+      handlerExecutionContext
+    );
+  }
+
+  private serialize(input: UpdateContinuousBackupsCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
+    return serializeAws_json1_0UpdateContinuousBackupsCommand(input, context);
+  }
+
+  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<UpdateContinuousBackupsCommandOutput> {
+    return deserializeAws_json1_0UpdateContinuousBackupsCommand(output, context);
+  }
+
+  // Start section: command_body_extra
+  // End section: command_body_extra
+}

package/src/commands/UpdateContributorInsightsCommand.ts

@@ -0,0 +1,98 @@
+import { getSerdePlugin } from "@aws-sdk/middleware-serde";
+import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
+import { Command as $Command } from "@aws-sdk/smithy-client";
+import {
+  FinalizeHandlerArguments,
+  Handler,
+  HandlerExecutionContext,
+  HttpHandlerOptions as __HttpHandlerOptions,
+  MetadataBearer as __MetadataBearer,
+  MiddlewareStack,
+  SerdeContext as __SerdeContext,
+} from "@aws-sdk/types";
+
+import { DynamoDBClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../DynamoDBClient";
+import { UpdateContributorInsightsInput, UpdateContributorInsightsOutput } from "../models/models_0";
+import {
+  deserializeAws_json1_0UpdateContributorInsightsCommand,
+  serializeAws_json1_0UpdateContributorInsightsCommand,
+} from "../protocols/Aws_json1_0";
+
+export interface UpdateContributorInsightsCommandInput extends UpdateContributorInsightsInput {}
+export interface UpdateContributorInsightsCommandOutput extends UpdateContributorInsightsOutput, __MetadataBearer {}
+
+/**
+ * <p>Updates the status for contributor insights for a specific table or index.</p>
+ * @example
+ * Use a bare-bones client and the command you need to make an API call.
+ * ```javascript
+ * import { DynamoDBClient, UpdateContributorInsightsCommand } from "@aws-sdk/client-dynamodb"; // ES Modules import
+ * // const { DynamoDBClient, UpdateContributorInsightsCommand } = require("@aws-sdk/client-dynamodb"); // CommonJS import
+ * const client = new DynamoDBClient(config);
+ * const command = new UpdateContributorInsightsCommand(input);
+ * const response = await client.send(command);
+ * ```
+ *
+ * @see {@link UpdateContributorInsightsCommandInput} for command's `input` shape.
+ * @see {@link UpdateContributorInsightsCommandOutput} for command's `response` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ *
+ */
+export class UpdateContributorInsightsCommand extends $Command<
+  UpdateContributorInsightsCommandInput,
+  UpdateContributorInsightsCommandOutput,
+  DynamoDBClientResolvedConfig
+> {
+  // Start section: command_properties
+  // End section: command_properties
+
+  constructor(readonly input: UpdateContributorInsightsCommandInput) {
+    // Start section: command_constructor
+    super();
+    // End section: command_constructor
+  }
+
+  /**
+   * @internal
+   */
+  resolveMiddleware(
+    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
+    configuration: DynamoDBClientResolvedConfig,
+    options?: __HttpHandlerOptions
+  ): Handler<UpdateContributorInsightsCommandInput, UpdateContributorInsightsCommandOutput> {
+    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
+
+    const stack = clientStack.concat(this.middlewareStack);
+
+    const { logger } = configuration;
+    const clientName = "DynamoDBClient";
+    const commandName = "UpdateContributorInsightsCommand";
+    const handlerExecutionContext: HandlerExecutionContext = {
+      logger,
+      clientName,
+      commandName,
+      inputFilterSensitiveLog: UpdateContributorInsightsInput.filterSensitiveLog,
+      outputFilterSensitiveLog: UpdateContributorInsightsOutput.filterSensitiveLog,
+    };
+    const { requestHandler } = configuration;
+    return stack.resolve(
+      (request: FinalizeHandlerArguments<any>) =>
+        requestHandler.handle(request.request as __HttpRequest, options || {}),
+      handlerExecutionContext
+    );
+  }
+
+  private serialize(input: UpdateContributorInsightsCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
+    return serializeAws_json1_0UpdateContributorInsightsCommand(input, context);
+  }
+
+  private deserialize(
+    output: __HttpResponse,
+    context: __SerdeContext
+  ): Promise<UpdateContributorInsightsCommandOutput> {
+    return deserializeAws_json1_0UpdateContributorInsightsCommand(output, context);
+  }
+
+  // Start section: command_body_extra
+  // End section: command_body_extra
+}

package/src/commands/UpdateGlobalTableCommand.ts

@@ -0,0 +1,123 @@
+import { getSerdePlugin } from "@aws-sdk/middleware-serde";
+import { HttpRequest as __HttpRequest, HttpResponse as __HttpResponse } from "@aws-sdk/protocol-http";
+import { Command as $Command } from "@aws-sdk/smithy-client";
+import {
+  FinalizeHandlerArguments,
+  Handler,
+  HandlerExecutionContext,
+  HttpHandlerOptions as __HttpHandlerOptions,
+  MetadataBearer as __MetadataBearer,
+  MiddlewareStack,
+  SerdeContext as __SerdeContext,
+} from "@aws-sdk/types";
+
+import { DynamoDBClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes } from "../DynamoDBClient";
+import { UpdateGlobalTableInput, UpdateGlobalTableOutput } from "../models/models_0";
+import {
+  deserializeAws_json1_0UpdateGlobalTableCommand,
+  serializeAws_json1_0UpdateGlobalTableCommand,
+} from "../protocols/Aws_json1_0";
+
+export interface UpdateGlobalTableCommandInput extends UpdateGlobalTableInput {}
+export interface UpdateGlobalTableCommandOutput extends UpdateGlobalTableOutput, __MetadataBearer {}
+
+/**
+ * <p>Adds or removes replicas in the specified global table. The global table must already
+ *             exist to be able to use this operation. Any replica to be added must be empty, have the
+ *             same name as the global table, have the same key schema, have DynamoDB Streams enabled,
+ *             and have the same provisioned and maximum write capacity units.</p>
+ *         <note>
+ *             <p>Although you can use <code>UpdateGlobalTable</code> to add replicas and remove replicas in
+ *                 a single request, for simplicity we recommend that you issue separate requests for
+ *                 adding or removing replicas.</p>
+ *          </note>
+ *        	<p>
+ *         If global secondary indexes are specified, then the following conditions must also be met:
+ *         </p>
+ *         <ul>
+ *             <li>
+ *                <p>
+ *                The global secondary indexes must have the same name.
+ *             </p>
+ *             </li>
+ *             <li>
+ *                <p>
+ *                The global secondary indexes must have the same hash key and sort key (if present).
+ *             </p>
+ *             </li>
+ *             <li>
+ *                <p>
+ *                The global secondary indexes must have the same provisioned and maximum write capacity units.
+ *             </p>
+ *             </li>
+ *          </ul>
+ * @example
+ * Use a bare-bones client and the command you need to make an API call.
+ * ```javascript
+ * import { DynamoDBClient, UpdateGlobalTableCommand } from "@aws-sdk/client-dynamodb"; // ES Modules import
+ * // const { DynamoDBClient, UpdateGlobalTableCommand } = require("@aws-sdk/client-dynamodb"); // CommonJS import
+ * const client = new DynamoDBClient(config);
+ * const command = new UpdateGlobalTableCommand(input);
+ * const response = await client.send(command);
+ * ```
+ *
+ * @see {@link UpdateGlobalTableCommandInput} for command's `input` shape.
+ * @see {@link UpdateGlobalTableCommandOutput} for command's `response` shape.
+ * @see {@link DynamoDBClientResolvedConfig | config} for command's `input` shape.
+ *
+ */
+export class UpdateGlobalTableCommand extends $Command<
+  UpdateGlobalTableCommandInput,
+  UpdateGlobalTableCommandOutput,
+  DynamoDBClientResolvedConfig
+> {
+  // Start section: command_properties
+  // End section: command_properties
+
+  constructor(readonly input: UpdateGlobalTableCommandInput) {
+    // Start section: command_constructor
+    super();
+    // End section: command_constructor
+  }
+
+  /**
+   * @internal
+   */
+  resolveMiddleware(
+    clientStack: MiddlewareStack<ServiceInputTypes, ServiceOutputTypes>,
+    configuration: DynamoDBClientResolvedConfig,
+    options?: __HttpHandlerOptions
+  ): Handler<UpdateGlobalTableCommandInput, UpdateGlobalTableCommandOutput> {
+    this.middlewareStack.use(getSerdePlugin(configuration, this.serialize, this.deserialize));
+
+    const stack = clientStack.concat(this.middlewareStack);
+
+    const { logger } = configuration;
+    const clientName = "DynamoDBClient";
+    const commandName = "UpdateGlobalTableCommand";
+    const handlerExecutionContext: HandlerExecutionContext = {
+      logger,
+      clientName,
+      commandName,
+      inputFilterSensitiveLog: UpdateGlobalTableInput.filterSensitiveLog,
+      outputFilterSensitiveLog: UpdateGlobalTableOutput.filterSensitiveLog,
+    };
+    const { requestHandler } = configuration;
+    return stack.resolve(
+      (request: FinalizeHandlerArguments<any>) =>
+        requestHandler.handle(request.request as __HttpRequest, options || {}),
+      handlerExecutionContext
+    );
+  }
+
+  private serialize(input: UpdateGlobalTableCommandInput, context: __SerdeContext): Promise<__HttpRequest> {
+    return serializeAws_json1_0UpdateGlobalTableCommand(input, context);
+  }
+
+  private deserialize(output: __HttpResponse, context: __SerdeContext): Promise<UpdateGlobalTableCommandOutput> {
+    return deserializeAws_json1_0UpdateGlobalTableCommand(output, context);
+  }
+
+  // Start section: command_body_extra
+  // End section: command_body_extra
+}