@aws-sdk/client-config-service 3.293.0 → 3.295.0

package/dist-types/ConfigServiceClient.d.ts

@@ -100,8 +100,8 @@ import { StopConfigurationRecorderCommandInput, StopConfigurationRecorderCommand
 import { TagResourceCommandInput, TagResourceCommandOutput } from "./commands/TagResourceCommand";
 import { UntagResourceCommandInput, UntagResourceCommandOutput } from "./commands/UntagResourceCommand";
 import { ClientInputEndpointParameters, ClientResolvedEndpointParameters, EndpointParameters } from "./endpoint/EndpointParameters";
-export declare type ServiceInputTypes = BatchGetAggregateResourceConfigCommandInput | BatchGetResourceConfigCommandInput | DeleteAggregationAuthorizationCommandInput | DeleteConfigRuleCommandInput | DeleteConfigurationAggregatorCommandInput | DeleteConfigurationRecorderCommandInput | DeleteConformancePackCommandInput | DeleteDeliveryChannelCommandInput | DeleteEvaluationResultsCommandInput | DeleteOrganizationConfigRuleCommandInput | DeleteOrganizationConformancePackCommandInput | DeletePendingAggregationRequestCommandInput | DeleteRemediationConfigurationCommandInput | DeleteRemediationExceptionsCommandInput | DeleteResourceConfigCommandInput | DeleteRetentionConfigurationCommandInput | DeleteStoredQueryCommandInput | DeliverConfigSnapshotCommandInput | DescribeAggregateComplianceByConfigRulesCommandInput | DescribeAggregateComplianceByConformancePacksCommandInput | DescribeAggregationAuthorizationsCommandInput | DescribeComplianceByConfigRuleCommandInput | DescribeComplianceByResourceCommandInput | DescribeConfigRuleEvaluationStatusCommandInput | DescribeConfigRulesCommandInput | DescribeConfigurationAggregatorSourcesStatusCommandInput | DescribeConfigurationAggregatorsCommandInput | DescribeConfigurationRecorderStatusCommandInput | DescribeConfigurationRecordersCommandInput | DescribeConformancePackComplianceCommandInput | DescribeConformancePackStatusCommandInput | DescribeConformancePacksCommandInput | DescribeDeliveryChannelStatusCommandInput | DescribeDeliveryChannelsCommandInput | DescribeOrganizationConfigRuleStatusesCommandInput | DescribeOrganizationConfigRulesCommandInput | DescribeOrganizationConformancePackStatusesCommandInput | DescribeOrganizationConformancePacksCommandInput | DescribePendingAggregationRequestsCommandInput | DescribeRemediationConfigurationsCommandInput | DescribeRemediationExceptionsCommandInput | DescribeRemediationExecutionStatusCommandInput | DescribeRetentionConfigurationsCommandInput | GetAggregateComplianceDetailsByConfigRuleCommandInput | GetAggregateConfigRuleComplianceSummaryCommandInput | GetAggregateConformancePackComplianceSummaryCommandInput | GetAggregateDiscoveredResourceCountsCommandInput | GetAggregateResourceConfigCommandInput | GetComplianceDetailsByConfigRuleCommandInput | GetComplianceDetailsByResourceCommandInput | GetComplianceSummaryByConfigRuleCommandInput | GetComplianceSummaryByResourceTypeCommandInput | GetConformancePackComplianceDetailsCommandInput | GetConformancePackComplianceSummaryCommandInput | GetCustomRulePolicyCommandInput | GetDiscoveredResourceCountsCommandInput | GetOrganizationConfigRuleDetailedStatusCommandInput | GetOrganizationConformancePackDetailedStatusCommandInput | GetOrganizationCustomRulePolicyCommandInput | GetResourceConfigHistoryCommandInput | GetResourceEvaluationSummaryCommandInput | GetStoredQueryCommandInput | ListAggregateDiscoveredResourcesCommandInput | ListConformancePackComplianceScoresCommandInput | ListDiscoveredResourcesCommandInput | ListResourceEvaluationsCommandInput | ListStoredQueriesCommandInput | ListTagsForResourceCommandInput | PutAggregationAuthorizationCommandInput | PutConfigRuleCommandInput | PutConfigurationAggregatorCommandInput | PutConfigurationRecorderCommandInput | PutConformancePackCommandInput | PutDeliveryChannelCommandInput | PutEvaluationsCommandInput | PutExternalEvaluationCommandInput | PutOrganizationConfigRuleCommandInput | PutOrganizationConformancePackCommandInput | PutRemediationConfigurationsCommandInput | PutRemediationExceptionsCommandInput | PutResourceConfigCommandInput | PutRetentionConfigurationCommandInput | PutStoredQueryCommandInput | SelectAggregateResourceConfigCommandInput | SelectResourceConfigCommandInput | StartConfigRulesEvaluationCommandInput | StartConfigurationRecorderCommandInput | StartRemediationExecutionCommandInput | StartResourceEvaluationCommandInput | StopConfigurationRecorderCommandInput | TagResourceCommandInput | UntagResourceCommandInput;
-export declare type ServiceOutputTypes = BatchGetAggregateResourceConfigCommandOutput | BatchGetResourceConfigCommandOutput | DeleteAggregationAuthorizationCommandOutput | DeleteConfigRuleCommandOutput | DeleteConfigurationAggregatorCommandOutput | DeleteConfigurationRecorderCommandOutput | DeleteConformancePackCommandOutput | DeleteDeliveryChannelCommandOutput | DeleteEvaluationResultsCommandOutput | DeleteOrganizationConfigRuleCommandOutput | DeleteOrganizationConformancePackCommandOutput | DeletePendingAggregationRequestCommandOutput | DeleteRemediationConfigurationCommandOutput | DeleteRemediationExceptionsCommandOutput | DeleteResourceConfigCommandOutput | DeleteRetentionConfigurationCommandOutput | DeleteStoredQueryCommandOutput | DeliverConfigSnapshotCommandOutput | DescribeAggregateComplianceByConfigRulesCommandOutput | DescribeAggregateComplianceByConformancePacksCommandOutput | DescribeAggregationAuthorizationsCommandOutput | DescribeComplianceByConfigRuleCommandOutput | DescribeComplianceByResourceCommandOutput | DescribeConfigRuleEvaluationStatusCommandOutput | DescribeConfigRulesCommandOutput | DescribeConfigurationAggregatorSourcesStatusCommandOutput | DescribeConfigurationAggregatorsCommandOutput | DescribeConfigurationRecorderStatusCommandOutput | DescribeConfigurationRecordersCommandOutput | DescribeConformancePackComplianceCommandOutput | DescribeConformancePackStatusCommandOutput | DescribeConformancePacksCommandOutput | DescribeDeliveryChannelStatusCommandOutput | DescribeDeliveryChannelsCommandOutput | DescribeOrganizationConfigRuleStatusesCommandOutput | DescribeOrganizationConfigRulesCommandOutput | DescribeOrganizationConformancePackStatusesCommandOutput | DescribeOrganizationConformancePacksCommandOutput | DescribePendingAggregationRequestsCommandOutput | DescribeRemediationConfigurationsCommandOutput | DescribeRemediationExceptionsCommandOutput | DescribeRemediationExecutionStatusCommandOutput | DescribeRetentionConfigurationsCommandOutput | GetAggregateComplianceDetailsByConfigRuleCommandOutput | GetAggregateConfigRuleComplianceSummaryCommandOutput | GetAggregateConformancePackComplianceSummaryCommandOutput | GetAggregateDiscoveredResourceCountsCommandOutput | GetAggregateResourceConfigCommandOutput | GetComplianceDetailsByConfigRuleCommandOutput | GetComplianceDetailsByResourceCommandOutput | GetComplianceSummaryByConfigRuleCommandOutput | GetComplianceSummaryByResourceTypeCommandOutput | GetConformancePackComplianceDetailsCommandOutput | GetConformancePackComplianceSummaryCommandOutput | GetCustomRulePolicyCommandOutput | GetDiscoveredResourceCountsCommandOutput | GetOrganizationConfigRuleDetailedStatusCommandOutput | GetOrganizationConformancePackDetailedStatusCommandOutput | GetOrganizationCustomRulePolicyCommandOutput | GetResourceConfigHistoryCommandOutput | GetResourceEvaluationSummaryCommandOutput | GetStoredQueryCommandOutput | ListAggregateDiscoveredResourcesCommandOutput | ListConformancePackComplianceScoresCommandOutput | ListDiscoveredResourcesCommandOutput | ListResourceEvaluationsCommandOutput | ListStoredQueriesCommandOutput | ListTagsForResourceCommandOutput | PutAggregationAuthorizationCommandOutput | PutConfigRuleCommandOutput | PutConfigurationAggregatorCommandOutput | PutConfigurationRecorderCommandOutput | PutConformancePackCommandOutput | PutDeliveryChannelCommandOutput | PutEvaluationsCommandOutput | PutExternalEvaluationCommandOutput | PutOrganizationConfigRuleCommandOutput | PutOrganizationConformancePackCommandOutput | PutRemediationConfigurationsCommandOutput | PutRemediationExceptionsCommandOutput | PutResourceConfigCommandOutput | PutRetentionConfigurationCommandOutput | PutStoredQueryCommandOutput | SelectAggregateResourceConfigCommandOutput | SelectResourceConfigCommandOutput | StartConfigRulesEvaluationCommandOutput | StartConfigurationRecorderCommandOutput | StartRemediationExecutionCommandOutput | StartResourceEvaluationCommandOutput | StopConfigurationRecorderCommandOutput | TagResourceCommandOutput | UntagResourceCommandOutput;
+export type ServiceInputTypes = BatchGetAggregateResourceConfigCommandInput | BatchGetResourceConfigCommandInput | DeleteAggregationAuthorizationCommandInput | DeleteConfigRuleCommandInput | DeleteConfigurationAggregatorCommandInput | DeleteConfigurationRecorderCommandInput | DeleteConformancePackCommandInput | DeleteDeliveryChannelCommandInput | DeleteEvaluationResultsCommandInput | DeleteOrganizationConfigRuleCommandInput | DeleteOrganizationConformancePackCommandInput | DeletePendingAggregationRequestCommandInput | DeleteRemediationConfigurationCommandInput | DeleteRemediationExceptionsCommandInput | DeleteResourceConfigCommandInput | DeleteRetentionConfigurationCommandInput | DeleteStoredQueryCommandInput | DeliverConfigSnapshotCommandInput | DescribeAggregateComplianceByConfigRulesCommandInput | DescribeAggregateComplianceByConformancePacksCommandInput | DescribeAggregationAuthorizationsCommandInput | DescribeComplianceByConfigRuleCommandInput | DescribeComplianceByResourceCommandInput | DescribeConfigRuleEvaluationStatusCommandInput | DescribeConfigRulesCommandInput | DescribeConfigurationAggregatorSourcesStatusCommandInput | DescribeConfigurationAggregatorsCommandInput | DescribeConfigurationRecorderStatusCommandInput | DescribeConfigurationRecordersCommandInput | DescribeConformancePackComplianceCommandInput | DescribeConformancePackStatusCommandInput | DescribeConformancePacksCommandInput | DescribeDeliveryChannelStatusCommandInput | DescribeDeliveryChannelsCommandInput | DescribeOrganizationConfigRuleStatusesCommandInput | DescribeOrganizationConfigRulesCommandInput | DescribeOrganizationConformancePackStatusesCommandInput | DescribeOrganizationConformancePacksCommandInput | DescribePendingAggregationRequestsCommandInput | DescribeRemediationConfigurationsCommandInput | DescribeRemediationExceptionsCommandInput | DescribeRemediationExecutionStatusCommandInput | DescribeRetentionConfigurationsCommandInput | GetAggregateComplianceDetailsByConfigRuleCommandInput | GetAggregateConfigRuleComplianceSummaryCommandInput | GetAggregateConformancePackComplianceSummaryCommandInput | GetAggregateDiscoveredResourceCountsCommandInput | GetAggregateResourceConfigCommandInput | GetComplianceDetailsByConfigRuleCommandInput | GetComplianceDetailsByResourceCommandInput | GetComplianceSummaryByConfigRuleCommandInput | GetComplianceSummaryByResourceTypeCommandInput | GetConformancePackComplianceDetailsCommandInput | GetConformancePackComplianceSummaryCommandInput | GetCustomRulePolicyCommandInput | GetDiscoveredResourceCountsCommandInput | GetOrganizationConfigRuleDetailedStatusCommandInput | GetOrganizationConformancePackDetailedStatusCommandInput | GetOrganizationCustomRulePolicyCommandInput | GetResourceConfigHistoryCommandInput | GetResourceEvaluationSummaryCommandInput | GetStoredQueryCommandInput | ListAggregateDiscoveredResourcesCommandInput | ListConformancePackComplianceScoresCommandInput | ListDiscoveredResourcesCommandInput | ListResourceEvaluationsCommandInput | ListStoredQueriesCommandInput | ListTagsForResourceCommandInput | PutAggregationAuthorizationCommandInput | PutConfigRuleCommandInput | PutConfigurationAggregatorCommandInput | PutConfigurationRecorderCommandInput | PutConformancePackCommandInput | PutDeliveryChannelCommandInput | PutEvaluationsCommandInput | PutExternalEvaluationCommandInput | PutOrganizationConfigRuleCommandInput | PutOrganizationConformancePackCommandInput | PutRemediationConfigurationsCommandInput | PutRemediationExceptionsCommandInput | PutResourceConfigCommandInput | PutRetentionConfigurationCommandInput | PutStoredQueryCommandInput | SelectAggregateResourceConfigCommandInput | SelectResourceConfigCommandInput | StartConfigRulesEvaluationCommandInput | StartConfigurationRecorderCommandInput | StartRemediationExecutionCommandInput | StartResourceEvaluationCommandInput | StopConfigurationRecorderCommandInput | TagResourceCommandInput | UntagResourceCommandInput;
+export type ServiceOutputTypes = BatchGetAggregateResourceConfigCommandOutput | BatchGetResourceConfigCommandOutput | DeleteAggregationAuthorizationCommandOutput | DeleteConfigRuleCommandOutput | DeleteConfigurationAggregatorCommandOutput | DeleteConfigurationRecorderCommandOutput | DeleteConformancePackCommandOutput | DeleteDeliveryChannelCommandOutput | DeleteEvaluationResultsCommandOutput | DeleteOrganizationConfigRuleCommandOutput | DeleteOrganizationConformancePackCommandOutput | DeletePendingAggregationRequestCommandOutput | DeleteRemediationConfigurationCommandOutput | DeleteRemediationExceptionsCommandOutput | DeleteResourceConfigCommandOutput | DeleteRetentionConfigurationCommandOutput | DeleteStoredQueryCommandOutput | DeliverConfigSnapshotCommandOutput | DescribeAggregateComplianceByConfigRulesCommandOutput | DescribeAggregateComplianceByConformancePacksCommandOutput | DescribeAggregationAuthorizationsCommandOutput | DescribeComplianceByConfigRuleCommandOutput | DescribeComplianceByResourceCommandOutput | DescribeConfigRuleEvaluationStatusCommandOutput | DescribeConfigRulesCommandOutput | DescribeConfigurationAggregatorSourcesStatusCommandOutput | DescribeConfigurationAggregatorsCommandOutput | DescribeConfigurationRecorderStatusCommandOutput | DescribeConfigurationRecordersCommandOutput | DescribeConformancePackComplianceCommandOutput | DescribeConformancePackStatusCommandOutput | DescribeConformancePacksCommandOutput | DescribeDeliveryChannelStatusCommandOutput | DescribeDeliveryChannelsCommandOutput | DescribeOrganizationConfigRuleStatusesCommandOutput | DescribeOrganizationConfigRulesCommandOutput | DescribeOrganizationConformancePackStatusesCommandOutput | DescribeOrganizationConformancePacksCommandOutput | DescribePendingAggregationRequestsCommandOutput | DescribeRemediationConfigurationsCommandOutput | DescribeRemediationExceptionsCommandOutput | DescribeRemediationExecutionStatusCommandOutput | DescribeRetentionConfigurationsCommandOutput | GetAggregateComplianceDetailsByConfigRuleCommandOutput | GetAggregateConfigRuleComplianceSummaryCommandOutput | GetAggregateConformancePackComplianceSummaryCommandOutput | GetAggregateDiscoveredResourceCountsCommandOutput | GetAggregateResourceConfigCommandOutput | GetComplianceDetailsByConfigRuleCommandOutput | GetComplianceDetailsByResourceCommandOutput | GetComplianceSummaryByConfigRuleCommandOutput | GetComplianceSummaryByResourceTypeCommandOutput | GetConformancePackComplianceDetailsCommandOutput | GetConformancePackComplianceSummaryCommandOutput | GetCustomRulePolicyCommandOutput | GetDiscoveredResourceCountsCommandOutput | GetOrganizationConfigRuleDetailedStatusCommandOutput | GetOrganizationConformancePackDetailedStatusCommandOutput | GetOrganizationCustomRulePolicyCommandOutput | GetResourceConfigHistoryCommandOutput | GetResourceEvaluationSummaryCommandOutput | GetStoredQueryCommandOutput | ListAggregateDiscoveredResourcesCommandOutput | ListConformancePackComplianceScoresCommandOutput | ListDiscoveredResourcesCommandOutput | ListResourceEvaluationsCommandOutput | ListStoredQueriesCommandOutput | ListTagsForResourceCommandOutput | PutAggregationAuthorizationCommandOutput | PutConfigRuleCommandOutput | PutConfigurationAggregatorCommandOutput | PutConfigurationRecorderCommandOutput | PutConformancePackCommandOutput | PutDeliveryChannelCommandOutput | PutEvaluationsCommandOutput | PutExternalEvaluationCommandOutput | PutOrganizationConfigRuleCommandOutput | PutOrganizationConformancePackCommandOutput | PutRemediationConfigurationsCommandOutput | PutRemediationExceptionsCommandOutput | PutResourceConfigCommandOutput | PutRetentionConfigurationCommandOutput | PutStoredQueryCommandOutput | SelectAggregateResourceConfigCommandOutput | SelectResourceConfigCommandOutput | StartConfigRulesEvaluationCommandOutput | StartConfigurationRecorderCommandOutput | StartRemediationExecutionCommandOutput | StartResourceEvaluationCommandOutput | StopConfigurationRecorderCommandOutput | TagResourceCommandOutput | UntagResourceCommandOutput;
 export interface ClientDefaults extends Partial<__SmithyResolvedConfiguration<__HttpHandlerOptions>> {
     /**
      * The HTTP handler to use. Fetch in browser and Https in Nodejs.
@@ -202,13 +202,13 @@ export interface ClientDefaults extends Partial<__SmithyResolvedConfiguration<__
      */
     defaultsMode?: __DefaultsMode | __Provider<__DefaultsMode>;
 }
-declare type ConfigServiceClientConfigType = Partial<__SmithyConfiguration<__HttpHandlerOptions>> & ClientDefaults & RegionInputConfig & EndpointInputConfig<EndpointParameters> & RetryInputConfig & HostHeaderInputConfig & AwsAuthInputConfig & UserAgentInputConfig & ClientInputEndpointParameters;
+type ConfigServiceClientConfigType = Partial<__SmithyConfiguration<__HttpHandlerOptions>> & ClientDefaults & RegionInputConfig & EndpointInputConfig<EndpointParameters> & RetryInputConfig & HostHeaderInputConfig & AwsAuthInputConfig & UserAgentInputConfig & ClientInputEndpointParameters;
 /**
  * The configuration interface of ConfigServiceClient class constructor that set the region, credentials and other options.
  */
 export interface ConfigServiceClientConfig extends ConfigServiceClientConfigType {
 }
-declare type ConfigServiceClientResolvedConfigType = __SmithyResolvedConfiguration<__HttpHandlerOptions> & Required<ClientDefaults> & RegionResolvedConfig & EndpointResolvedConfig<EndpointParameters> & RetryResolvedConfig & HostHeaderResolvedConfig & AwsAuthResolvedConfig & UserAgentResolvedConfig & ClientResolvedEndpointParameters;
+type ConfigServiceClientResolvedConfigType = __SmithyResolvedConfiguration<__HttpHandlerOptions> & Required<ClientDefaults> & RegionResolvedConfig & EndpointResolvedConfig<EndpointParameters> & RetryResolvedConfig & HostHeaderResolvedConfig & AwsAuthResolvedConfig & UserAgentResolvedConfig & ClientResolvedEndpointParameters;
 /**
  * The resolved configuration interface of ConfigServiceClient class. This is resolved and normalized from the {@link ConfigServiceClientConfig | constructor configuration interface}.
  */
@@ -216,8 +216,7 @@ export interface ConfigServiceClientResolvedConfig extends ConfigServiceClientRe
 }
 /**
  * <fullname>Config</fullname>
- *
- * 		       <p>Config provides a way to keep track of the configurations
+ *          <p>Config provides a way to keep track of the configurations
  * 			of all the Amazon Web Services resources associated with your Amazon Web Services account. You can
  * 			use Config to get the current and historical configurations of
  * 			each Amazon Web Services resource and also to get information about the relationship
@@ -225,8 +224,7 @@ export interface ConfigServiceClientResolvedConfig extends ConfigServiceClientRe
  * 			Cloud (Amazon EC2) instance, an Elastic Block Store (EBS) volume, an
  * 			elastic network Interface (ENI), or a security group. For a complete
  * 			list of resources currently supported by Config, see <a href="https://docs.aws.amazon.com/config/latest/developerguide/resource-config-reference.html#supported-resources">Supported Amazon Web Services resources</a>.</p>
- *
- * 		       <p>You can access and manage Config through the Amazon Web Services Management
+ *          <p>You can access and manage Config through the Amazon Web Services Management
  * 			Console, the Amazon Web Services Command Line Interface (Amazon Web Services CLI), the Config
  * 			API, or the Amazon Web Services SDKs for Config. This reference guide contains
  * 			documentation for the Config API and the Amazon Web Services CLI commands that

package/dist-types/commands/BatchGetAggregateResourceConfigCommand.d.ts

@@ -16,8 +16,7 @@ export interface BatchGetAggregateResourceConfigCommandOutput extends BatchGetAg
 /**
  * <p>Returns the current configuration items for resources that are present in your Config aggregator. The operation also returns a list of resources that are not processed in the current request.
  * 			If there are no unprocessed resources, the operation returns an empty <code>unprocessedResourceIdentifiers</code> list. </p>
- *
- * 		       <note>
+ *          <note>
  *             <ul>
  *                <li>
  *                   <p>The API does not return results for deleted resources.</p>
@@ -45,9 +44,9 @@ export interface BatchGetAggregateResourceConfigCommandOutput extends BatchGetAg
  *  <p>You have specified a configuration aggregator that does not exist.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/BatchGetResourceConfigCommand.d.ts

@@ -19,20 +19,20 @@ export interface BatchGetResourceConfigCommandOutput extends BatchGetResourceCon
  * 			not processed in the current request. If there are no unprocessed
  * 			resources, the operation returns an empty unprocessedResourceKeys
  * 			list. </p>
- * 		       <note>
- * 			         <ul>
+ *          <note>
+ *             <ul>
  *                <li>
- * 					             <p>The API does not return results for deleted
+ *                   <p>The API does not return results for deleted
  * 						resources.</p>
- * 				           </li>
+ *                </li>
  *                <li>
- * 					             <p> The API does not return any tags for the requested
+ *                   <p> The API does not return any tags for the requested
  * 						resources. This information is filtered out of the
  * 						supplementaryConfiguration section of the API
  * 						response.</p>
- * 				           </li>
+ *                </li>
  *             </ul>
- * 		       </note>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -53,9 +53,9 @@ export interface BatchGetResourceConfigCommandOutput extends BatchGetResourceCon
  * 			recorder.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/DeleteAggregationAuthorizationCommand.d.ts

@@ -31,7 +31,7 @@ export interface DeleteAggregationAuthorizationCommandOutput extends __MetadataB
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  *

package/dist-types/commands/DeleteConfigRuleCommand.d.ts

@@ -16,12 +16,12 @@ export interface DeleteConfigRuleCommandOutput extends __MetadataBearer {
 /**
  * <p>Deletes the specified Config rule and all of its evaluation
  * 			results.</p>
- * 		       <p>Config sets the state of a rule to <code>DELETING</code>
+ *          <p>Config sets the state of a rule to <code>DELETING</code>
  * 			until the deletion is complete. You cannot update a rule while it is
  * 			in this state. If you make a <code>PutConfigRule</code> or
  * 				<code>DeleteConfigRule</code> request for the rule, you will
  * 			receive a <code>ResourceInUseException</code>.</p>
- * 		       <p>You can check the state of a rule by using the
+ *          <p>You can check the state of a rule by using the
  * 				<code>DescribeConfigRules</code> request.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
@@ -38,11 +38,11 @@ export interface DeleteConfigRuleCommandOutput extends __MetadataBearer {
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link NoSuchConfigRuleException} (client fault)
- *  <p>The Config rule in the request is invalid. Verify that the rule is an Config Custom Policy rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
+ *  <p>The Config rule in the request is not valid. Verify that the rule is an Config Process Check rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
  *
  * @throws {@link ResourceInUseException} (client fault)
  *  <p>You see this exception in the following cases: </p>
- * 		       <ul>
+ *          <ul>
  *             <li>
  *                <p>For DeleteConfigRule, Config is deleting this rule. Try your request again later.</p>
  *             </li>

package/dist-types/commands/DeleteConfigurationRecorderCommand.d.ts

@@ -15,10 +15,10 @@ export interface DeleteConfigurationRecorderCommandOutput extends __MetadataBear
 }
 /**
  * <p>Deletes the configuration recorder.</p>
- * 		       <p>After the configuration recorder is deleted, Config will
+ *          <p>After the configuration recorder is deleted, Config will
  * 			not record resource configuration changes until you create a new
  * 			configuration recorder.</p>
- * 		       <p>This action does not delete the configuration information that
+ *          <p>This action does not delete the configuration information that
  * 			was previously recorded. You will be able to access the previously
  * 			recorded information by using the
  * 				<code>GetResourceConfigHistory</code> action, but you will not

package/dist-types/commands/DeleteConformancePackCommand.d.ts

@@ -16,7 +16,7 @@ export interface DeleteConformancePackCommandOutput extends __MetadataBearer {
 /**
  * <p>Deletes the specified conformance pack and all the Config rules, remediation actions, and all evaluation results within that
  * 			conformance pack.</p>
- * 		       <p>Config sets the conformance pack to <code>DELETE_IN_PROGRESS</code> until the deletion is complete.
+ *          <p>Config sets the conformance pack to <code>DELETE_IN_PROGRESS</code> until the deletion is complete.
  * 			You cannot update a conformance pack while it is in this state.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
@@ -37,7 +37,7 @@ export interface DeleteConformancePackCommandOutput extends __MetadataBearer {
  *
  * @throws {@link ResourceInUseException} (client fault)
  *  <p>You see this exception in the following cases: </p>
- * 		       <ul>
+ *          <ul>
  *             <li>
  *                <p>For DeleteConfigRule, Config is deleting this rule. Try your request again later.</p>
  *             </li>

package/dist-types/commands/DeleteDeliveryChannelCommand.d.ts

@@ -15,7 +15,7 @@ export interface DeleteDeliveryChannelCommandOutput extends __MetadataBearer {
 }
 /**
  * <p>Deletes the delivery channel.</p>
- * 		       <p>Before you can delete the delivery channel, you must stop the
+ *          <p>Before you can delete the delivery channel, you must stop the
  * 			configuration recorder by using the <a>StopConfigurationRecorder</a> action.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

package/dist-types/commands/DeleteEvaluationResultsCommand.d.ts

@@ -33,11 +33,11 @@ export interface DeleteEvaluationResultsCommandOutput extends DeleteEvaluationRe
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link NoSuchConfigRuleException} (client fault)
- *  <p>The Config rule in the request is invalid. Verify that the rule is an Config Custom Policy rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
+ *  <p>The Config rule in the request is not valid. Verify that the rule is an Config Process Check rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
  *
  * @throws {@link ResourceInUseException} (client fault)
  *  <p>You see this exception in the following cases: </p>
- * 		       <ul>
+ *          <ul>
  *             <li>
  *                <p>For DeleteConfigRule, Config is deleting this rule. Try your request again later.</p>
  *             </li>

package/dist-types/commands/DeleteOrganizationConfigRuleCommand.d.ts

@@ -15,10 +15,10 @@ export interface DeleteOrganizationConfigRuleCommandOutput extends __MetadataBea
 }
 /**
  * <p>Deletes the specified organization Config rule and all of its evaluation results from all member accounts in that organization. </p>
- * 	        <p>Only a management account and a delegated administrator account can delete an organization Config rule.
+ *          <p>Only a management account and a delegated administrator account can delete an organization Config rule.
  * 		When calling this API with a delegated administrator, you must ensure Organizations
  * 			<code>ListDelegatedAdministrator</code> permissions are added.</p>
- * 		       <p>Config sets the state of a rule to DELETE_IN_PROGRESS until the deletion is complete.
+ *          <p>Config sets the state of a rule to DELETE_IN_PROGRESS until the deletion is complete.
  * 			You cannot update a rule while it is in this state.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
@@ -35,11 +35,11 @@ export interface DeleteOrganizationConfigRuleCommandOutput extends __MetadataBea
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link NoSuchOrganizationConfigRuleException} (client fault)
- *  <p>The Config rule in the request is invalid. Verify that the rule is an organization Config Custom Policy rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
+ *  <p>The Config rule in the request is not valid. Verify that the rule is an organization Config Process Check rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
  *
  * @throws {@link OrganizationAccessDeniedException} (client fault)
  *  <p>For <code>PutConfigurationAggregator</code> API, you can see this exception for the following reasons:</p>
- * 		       <ul>
+ *          <ul>
  *             <li>
  *                <p>No permission to call <code>EnableAWSServiceAccess</code> API</p>
  *             </li>
@@ -56,11 +56,11 @@ export interface DeleteOrganizationConfigRuleCommandOutput extends __MetadataBea
  * 			Ensure that the management account registers delagated administrator for Config service principle name before the delegated administrator creates an aggregator.</p>
  *             </li>
  *          </ul>
- * 		       <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
+ *          <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
  *
  * @throws {@link ResourceInUseException} (client fault)
  *  <p>You see this exception in the following cases: </p>
- * 		       <ul>
+ *          <ul>
  *             <li>
  *                <p>For DeleteConfigRule, Config is deleting this rule. Try your request again later.</p>
  *             </li>

package/dist-types/commands/DeleteOrganizationConformancePackCommand.d.ts

@@ -19,7 +19,7 @@ export interface DeleteOrganizationConformancePackCommandOutput extends __Metada
  *          <p> Only a management account or a delegated administrator account can delete an organization conformance pack.
  * 	When calling this API with a delegated administrator, you must ensure Organizations
  * 		<code>ListDelegatedAdministrator</code> permissions are added.</p>
- * 			      <p>Config sets the state of a conformance pack to DELETE_IN_PROGRESS until the deletion is complete.
+ *          <p>Config sets the state of a conformance pack to DELETE_IN_PROGRESS until the deletion is complete.
  * 				You cannot update a conformance pack while it is in this state. </p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
@@ -37,11 +37,11 @@ export interface DeleteOrganizationConformancePackCommandOutput extends __Metada
  *
  * @throws {@link NoSuchOrganizationConformancePackException} (client fault)
  *  <p>Config organization conformance pack that you passed in the filter does not exist.</p>
- * 		       <p>For DeleteOrganizationConformancePack, you tried to delete an organization conformance pack that does not exist.</p>
+ *          <p>For DeleteOrganizationConformancePack, you tried to delete an organization conformance pack that does not exist.</p>
  *
  * @throws {@link OrganizationAccessDeniedException} (client fault)
  *  <p>For <code>PutConfigurationAggregator</code> API, you can see this exception for the following reasons:</p>
- * 		       <ul>
+ *          <ul>
  *             <li>
  *                <p>No permission to call <code>EnableAWSServiceAccess</code> API</p>
  *             </li>
@@ -58,11 +58,11 @@ export interface DeleteOrganizationConformancePackCommandOutput extends __Metada
  * 			Ensure that the management account registers delagated administrator for Config service principle name before the delegated administrator creates an aggregator.</p>
  *             </li>
  *          </ul>
- * 		       <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
+ *          <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
  *
  * @throws {@link ResourceInUseException} (client fault)
  *  <p>You see this exception in the following cases: </p>
- * 		       <ul>
+ *          <ul>
  *             <li>
  *                <p>For DeleteConfigRule, Config is deleting this rule. Try your request again later.</p>
  *             </li>

package/dist-types/commands/DeletePendingAggregationRequestCommand.d.ts

@@ -31,7 +31,7 @@ export interface DeletePendingAggregationRequestCommandOutput extends __Metadata
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  *

package/dist-types/commands/DeleteRemediationConfigurationCommand.d.ts

@@ -31,7 +31,7 @@ export interface DeleteRemediationConfigurationCommandOutput extends DeleteRemed
  *
  * @throws {@link InsufficientPermissionsException} (client fault)
  *  <p>Indicates one of the following errors:</p>
- * 		       <ul>
+ *          <ul>
  *             <li>
  *                <p>For PutConfigRule, the rule cannot be created because the IAM role assigned to Config lacks permissions to perform the config:Put* action.</p>
  *             </li>
@@ -43,7 +43,7 @@ export interface DeleteRemediationConfigurationCommandOutput extends DeleteRemed
  *             </li>
  *             <li>
  *                <p>For PutConformancePack and PutOrganizationConformancePack, a conformance pack cannot be created because you do not have the following permissions: </p>
- * 				           <ul>
+ *                <ul>
  *                   <li>
  *                      <p>You do not have permission to call IAM <code>GetRole</code> action or create a service-linked role.</p>
  *                   </li>
@@ -51,11 +51,11 @@ export interface DeleteRemediationConfigurationCommandOutput extends DeleteRemed
  *                      <p>You do not have permission to read Amazon S3 bucket or call SSM:GetDocument.</p>
  *                   </li>
  *                </ul>
- * 			         </li>
+ *             </li>
  *          </ul>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  * @throws {@link NoSuchRemediationConfigurationException} (client fault)

package/dist-types/commands/DeleteRemediationExceptionsCommand.d.ts

@@ -15,7 +15,7 @@ export interface DeleteRemediationExceptionsCommandOutput extends DeleteRemediat
 }
 /**
  * <p>Deletes one or more remediation exceptions mentioned in the resource keys.</p>
- * 		       <note>
+ *          <note>
  *             <p>Config generates a remediation exception when a problem occurs executing a remediation action to a specific resource.
  * 			Remediation exceptions blocks auto-remediation until the exception is cleared.</p>
  *          </note>

package/dist-types/commands/DeleteResourceConfigCommand.d.ts

@@ -34,9 +34,9 @@ export interface DeleteResourceConfigCommandOutput extends __MetadataBearer {
  *  <p>There is no configuration recorder running.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/DeleteRetentionConfigurationCommand.d.ts

@@ -30,7 +30,7 @@ export interface DeleteRetentionConfigurationCommandOutput extends __MetadataBea
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  * @throws {@link NoSuchRetentionConfigurationException} (client fault)

package/dist-types/commands/DeleteStoredQueryCommand.d.ts

@@ -33,9 +33,9 @@ export interface DeleteStoredQueryCommandOutput extends DeleteStoredQueryRespons
  *  <p>You have specified a resource that does not exist.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/DeliverConfigSnapshotCommand.d.ts

@@ -18,18 +18,18 @@ export interface DeliverConfigSnapshotCommandOutput extends DeliverConfigSnapsho
  * 			bucket in the specified delivery channel. After the delivery has
  * 			started, Config sends the following notifications using an
  * 			Amazon SNS topic that you have specified.</p>
- * 		       <ul>
+ *          <ul>
  *             <li>
- * 				           <p>Notification of the start of the delivery.</p>
- * 			         </li>
+ *                <p>Notification of the start of the delivery.</p>
+ *             </li>
  *             <li>
- * 				           <p>Notification of the completion of the delivery, if the
+ *                <p>Notification of the completion of the delivery, if the
  * 					delivery was successfully completed.</p>
- * 			         </li>
+ *             </li>
  *             <li>
- * 				           <p>Notification of delivery failure, if the delivery
+ *                <p>Notification of delivery failure, if the delivery
  * 					failed.</p>
- * 			         </li>
+ *             </li>
  *          </ul>
  * @example
  * Use a bare-bones client and the command you need to make an API call.

package/dist-types/commands/DescribeAggregateComplianceByConfigRulesCommand.d.ts

@@ -17,11 +17,11 @@ export interface DescribeAggregateComplianceByConfigRulesCommandOutput extends D
  * <p>Returns a list of compliant and noncompliant rules with the
  * 			number of resources for compliant and noncompliant rules. Does not display rules that do not have compliance results.
  * 			</p>
- * 		       <note>
- * 			         <p>The results can return an empty result page, but if you
+ *          <note>
+ *             <p>The results can return an empty result page, but if you
  * 				have a <code>nextToken</code>, the results are displayed on the next
  * 				page.</p>
- * 		       </note>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -40,7 +40,7 @@ export interface DescribeAggregateComplianceByConfigRulesCommandOutput extends D
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
@@ -48,9 +48,9 @@ export interface DescribeAggregateComplianceByConfigRulesCommandOutput extends D
  *  <p>You have specified a configuration aggregator that does not exist.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/DescribeAggregateComplianceByConformancePacksCommand.d.ts

@@ -16,7 +16,7 @@ export interface DescribeAggregateComplianceByConformancePacksCommandOutput exte
 /**
  * <p>Returns a list of the conformance packs and their associated compliance status with the count of compliant and noncompliant Config rules within each
  * 			conformance pack. Also returns the total rule count which includes compliant rules, noncompliant rules, and rules that cannot be evaluated due to insufficient data.</p>
- * 		       <note>
+ *          <note>
  *             <p>The results can return an empty result page, but if you have a <code>nextToken</code>, the results are displayed on the next page.</p>
  *          </note>
  * @example
@@ -37,7 +37,7 @@ export interface DescribeAggregateComplianceByConformancePacksCommandOutput exte
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
@@ -45,9 +45,9 @@ export interface DescribeAggregateComplianceByConformancePacksCommandOutput exte
  *  <p>You have specified a configuration aggregator that does not exist.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/DescribeAggregationAuthorizationsCommand.d.ts

@@ -34,12 +34,12 @@ export interface DescribeAggregationAuthorizationsCommandOutput extends Describe
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  *

package/dist-types/commands/DescribeComplianceByConfigRuleCommand.d.ts

@@ -17,35 +17,35 @@ export interface DescribeComplianceByConfigRuleCommandOutput extends DescribeCom
  * <p>Indicates whether the specified Config rules are compliant.
  * 			If a rule is noncompliant, this action returns the number of Amazon Web Services
  * 			resources that do not comply with the rule.</p>
- * 		       <p>A rule is compliant if all of the evaluated resources comply
+ *          <p>A rule is compliant if all of the evaluated resources comply
  * 			with it. It is noncompliant if any of these resources do not
  * 			comply.</p>
- * 		       <p>If Config has no current evaluation results for the rule,
+ *          <p>If Config has no current evaluation results for the rule,
  * 			it returns <code>INSUFFICIENT_DATA</code>. This result might
  * 			indicate one of the following conditions:</p>
- * 		       <ul>
+ *          <ul>
  *             <li>
- * 				           <p>Config has never invoked an evaluation for the
+ *                <p>Config has never invoked an evaluation for the
  * 					rule. To check whether it has, use the
  * 						<code>DescribeConfigRuleEvaluationStatus</code> action
  * 					to get the <code>LastSuccessfulInvocationTime</code> and
  * 						<code>LastFailedInvocationTime</code>.</p>
- * 			         </li>
+ *             </li>
  *             <li>
- * 				           <p>The rule's Lambda function is failing to send
+ *                <p>The rule's Lambda function is failing to send
  * 					evaluation results to Config. Verify that the role you
  * 					assigned to your configuration recorder includes the
  * 						<code>config:PutEvaluations</code> permission. If the
  * 					rule is a custom rule, verify that the Lambda execution
  * 					role includes the <code>config:PutEvaluations</code>
  * 					permission.</p>
- * 			         </li>
+ *             </li>
  *             <li>
- * 				           <p>The rule's Lambda function has returned
+ *                <p>The rule's Lambda function has returned
  * 						<code>NOT_APPLICABLE</code> for all evaluation results.
  * 					This can occur if the resources were deleted or removed from
  * 					the rule's scope.</p>
- * 			         </li>
+ *             </li>
  *          </ul>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
@@ -62,16 +62,16 @@ export interface DescribeComplianceByConfigRuleCommandOutput extends DescribeCom
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  * @throws {@link NoSuchConfigRuleException} (client fault)
- *  <p>The Config rule in the request is invalid. Verify that the rule is an Config Custom Policy rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
+ *  <p>The Config rule in the request is not valid. Verify that the rule is an Config Process Check rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
  *
  *
  */