@awboost/cfn-resource-types 0.1.387 → 0.1.389

package/lib/AWS-CloudWatch-Alarm.d.ts

@@ -75,9 +75,9 @@ export type CloudWatchAlarmProperties = {
      */
     OKActions?: string[];
     /**
-       * The period, in seconds, over which the statistic is applied. This is required for an alarm based on a metric. Valid values are 10, 30, 60, and any multiple of 60.
+       * The period, in seconds, over which the statistic is applied. This is required for an alarm based on a metric. Valid values are 10, 20, 30, 60, and any multiple of 60.
        For an alarm based on a math expression, you can't specify ``Period``, and instead you use the ``Metrics`` parameter.
-        *Minimum:* 10
+       *Minimum:* 10
        */
     Period?: number;
     /**
@@ -120,7 +120,7 @@ export type CloudWatchAlarmAttributes = {
 };
 /**
  * Type definition for `AWS::CloudWatch::Alarm.Dimension`.
- * Dimension is an embedded property of the ``AWS::CloudWatch::Alarm`` type. Dimensions are name/value pairs that can be associated with a CW metric. You can specify a maximum of 10 dimensions for a given metric.
+ * Dimension is an embedded property of the ``AWS::CloudWatch::Alarm`` type. Dimensions are name/value pairs that can be associated with a CW metric. You can specify a maximum of 30 dimensions for a given metric.
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-dimension.html}
  */
 export type Dimension = {
@@ -182,7 +182,7 @@ export type MetricDataQuery = {
        */
     MetricStat?: MetricStat;
     /**
-     * The granularity, in seconds, of the returned data points. For metrics with regular resolution, a period can be as short as one minute (60 seconds) and must be a multiple of 60. For high-resolution metrics that are collected at intervals of less than one minute, the period can be 1, 5, 10, 30, 60, or any multiple of 60. High-resolution metrics are those metrics stored by a ``PutMetricData`` operation that includes a ``StorageResolution of 1 second``.
+     * The granularity, in seconds, of the returned data points. For metrics with regular resolution, a period can be as short as one minute (60 seconds) and must be a multiple of 60. For high-resolution metrics that are collected at intervals of less than one minute, the period can be 1, 5, 10, 20, 30, 60, or any multiple of 60. High-resolution metrics are those metrics stored by a ``PutMetricData`` operation that includes a ``StorageResolution of 1 second``.
      */
     Period?: number;
     /**
@@ -195,7 +195,7 @@ export type MetricDataQuery = {
 /**
  * Type definition for `AWS::CloudWatch::Alarm.MetricStat`.
  * This structure defines the metric to be returned, along with the statistics, period, and units.
-  ``MetricStat`` is a property of the [MetricDataQuery](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricdataquery.html) property type.
+ ``MetricStat`` is a property of the [MetricDataQuery](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricdataquery.html) property type.
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudwatch-alarm-metricstat.html}
  */
 export type MetricStat = {
@@ -204,7 +204,7 @@ export type MetricStat = {
      */
     Metric: Metric;
     /**
-       * The granularity, in seconds, of the returned data points. For metrics with regular resolution, a period can be as short as one minute (60 seconds) and must be a multiple of 60. For high-resolution metrics that are collected at intervals of less than one minute, the period can be 1, 5, 10, 30, 60, or any multiple of 60. High-resolution metrics are those metrics stored by a ``PutMetricData`` call that includes a ``StorageResolution`` of 1 second.
+       * The granularity, in seconds, of the returned data points. For metrics with regular resolution, a period can be as short as one minute (60 seconds) and must be a multiple of 60. For high-resolution metrics that are collected at intervals of less than one minute, the period can be 1, 5, 10, 20, 30, 60, or any multiple of 60. High-resolution metrics are those metrics stored by a ``PutMetricData`` call that includes a ``StorageResolution`` of 1 second.
        If the ``StartTime`` parameter specifies a time stamp that is greater than 3 hours ago, you must specify the period as follows or no data points in that time range is returned:
         +  Start time between 3 hours and 15 days ago - Use a multiple of 60 seconds (1 minute).
         +  Start time between 15 and 63 days ago - Use a multiple of 300 seconds (5 minutes).

package/lib/AWS-EC2-TransitGatewayConnectPeer.d.ts

@@ -0,0 +1,123 @@
+import { Resource as $Resource } from "@awboost/cfn-template-builder/template/resource";
+import type { ResourceOptions as $ResourceOptions } from "@awboost/cfn-template-builder/template";
+/**
+ * Resource Type definition for AWS::EC2::TransitGatewayConnectPeer
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-transitgatewayconnectpeer.html}
+ */
+export type EC2TransitGatewayConnectPeerProperties = {
+    /**
+     * The Connect peer details.
+     */
+    ConnectPeerConfiguration: TransitGatewayConnectPeerConfiguration;
+    /**
+     * The tags for the Connect Peer.
+     */
+    Tags?: Tag[];
+    /**
+     * The ID of the Connect attachment.
+     */
+    TransitGatewayAttachmentId: string;
+};
+/**
+ * Attribute type definition for `AWS::EC2::TransitGatewayConnectPeer`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-transitgatewayconnectpeer.html#aws-resource-ec2-transitgatewayconnectpeer-return-values}
+ */
+export type EC2TransitGatewayConnectPeerAttributes = {
+    /**
+     * The Connect peer details.
+     */
+    ConnectPeerConfiguration: {
+        /**
+         * The BGP configuration details.
+         */
+        BgpConfigurations: {
+            /**
+             * The BGP status.
+             */
+            BgpStatus: string;
+            /**
+             * The interior BGP peer IP address for the appliance.
+             */
+            PeerAddress: string;
+            /**
+             * The peer Autonomous System Number (ASN).
+             */
+            PeerAsn: number;
+            /**
+             * The interior BGP peer IP address for the transit gateway.
+             */
+            TransitGatewayAddress: string;
+            /**
+             * The transit gateway Autonomous System Number (ASN).
+             */
+            TransitGatewayAsn: number;
+        }[];
+        /**
+         * The tunnel protocol.
+         */
+        Protocol: string;
+    };
+    /**
+     * The creation time.
+     */
+    CreationTime: string;
+    /**
+     * The state of the Connect peer.
+     */
+    State: string;
+    /**
+     * The ID of the Connect peer.
+     */
+    TransitGatewayConnectPeerId: string;
+};
+/**
+ * Type definition for `AWS::EC2::TransitGatewayConnectPeer.Tag`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-transitgatewayconnectpeer-tag.html}
+ */
+export type Tag = {
+    /**
+     * The key of the tag. Constraints: Tag keys are case-sensitive and accept a maximum of 127 Unicode characters. May not begin with aws: .
+     */
+    Key?: string;
+    /**
+     * The value of the tag. Constraints: Tag values are case-sensitive and accept a maximum of 256 Unicode characters.
+     */
+    Value?: string;
+};
+/**
+ * Type definition for `AWS::EC2::TransitGatewayConnectPeer.TransitGatewayAttachmentBgpConfiguration`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-transitgatewayconnectpeer-transitgatewayattachmentbgpconfiguration.html}
+ */
+export type TransitGatewayAttachmentBgpConfiguration = {
+    /**
+     * The peer Autonomous System Number (ASN).
+     */
+    PeerAsn?: number;
+};
+/**
+ * Type definition for `AWS::EC2::TransitGatewayConnectPeer.TransitGatewayConnectPeerConfiguration`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-transitgatewayconnectpeer-transitgatewayconnectpeerconfiguration.html}
+ */
+export type TransitGatewayConnectPeerConfiguration = {
+    /**
+     * The range of interior BGP peer IP addresses.
+     */
+    InsideCidrBlocks: string[];
+    /**
+     * The peer IP address (GRE outer IP address) on the appliance side of the Connect peer.
+     */
+    PeerAddress: string;
+    /**
+     * The Connect peer IP address on the transit gateway side of the tunnel.
+     */
+    TransitGatewayAddress?: string;
+};
+/**
+ * Resource Type definition for AWS::EC2::TransitGatewayConnectPeer
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-transitgatewayconnectpeer.html}
+ */
+export declare class EC2TransitGatewayConnectPeer extends $Resource<"AWS::EC2::TransitGatewayConnectPeer", EC2TransitGatewayConnectPeerProperties, EC2TransitGatewayConnectPeerAttributes> {
+    static readonly Type = "AWS::EC2::TransitGatewayConnectPeer";
+    constructor(logicalId: string, properties: EC2TransitGatewayConnectPeerProperties, options?: $ResourceOptions);
+}
+//# sourceMappingURL=AWS-EC2-TransitGatewayConnectPeer.d.ts.map

package/lib/AWS-EC2-TransitGatewayConnectPeer.js

@@ -0,0 +1,12 @@
+import { Resource as $Resource } from "@awboost/cfn-template-builder/template/resource";
+/**
+ * Resource Type definition for AWS::EC2::TransitGatewayConnectPeer
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-transitgatewayconnectpeer.html}
+ */
+export class EC2TransitGatewayConnectPeer extends $Resource {
+    static Type = "AWS::EC2::TransitGatewayConnectPeer";
+    constructor(logicalId, properties, options) {
+        super(logicalId, EC2TransitGatewayConnectPeer.Type, properties, options);
+    }
+}
+//# sourceMappingURL=AWS-EC2-TransitGatewayConnectPeer.js.map

package/lib/AWS-ECR-Repository.d.ts

@@ -20,7 +20,12 @@ export type ECRRepositoryProperties = {
     /**
      * The tag mutability setting for the repository. If this parameter is omitted, the default setting of ``MUTABLE`` will be used which will allow image tags to be overwritten. If ``IMMUTABLE`` is specified, all image tags within the repository will be immutable which will prevent them from being overwritten.
      */
-    ImageTagMutability?: "MUTABLE" | "IMMUTABLE";
+    ImageTagMutability?: "MUTABLE" | "IMMUTABLE" | "MUTABLE_WITH_EXCLUSION" | "IMMUTABLE_WITH_EXCLUSION";
+    /**
+     * @minLength `1`
+     * @maxLength `5`
+     */
+    ImageTagMutabilityExclusionFilters?: ImageTagMutabilityExclusionFilter[];
     /**
      * Creates or updates a lifecycle policy. For information about lifecycle policy syntax, see [Lifecycle policy template](https://docs.aws.amazon.com/AmazonECR/latest/userguide/LifecyclePolicies.html).
      */
@@ -92,6 +97,29 @@ export type ImageScanningConfiguration = {
      */
     ScanOnPush?: boolean;
 };
+/**
+ * Type definition for `AWS::ECR::Repository.ImageTagMutabilityExclusionFilter`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ecr-repository-imagetagmutabilityexclusionfilter.html}
+ */
+export type ImageTagMutabilityExclusionFilter = {
+    /**
+     * Specifies the type of filter to use for excluding image tags from the repository's mutability setting.
+     */
+    ImageTagMutabilityExclusionFilterType: ImageTagMutabilityExclusionFilterType;
+    /**
+     * The value to use when filtering image tags.
+     * @minLength `1`
+     * @maxLength `128`
+     * @pattern `^[0-9a-zA-Z._*-]{1,128}`
+     */
+    ImageTagMutabilityExclusionFilterValue: string;
+};
+/**
+ * Type definition for `AWS::ECR::Repository.ImageTagMutabilityExclusionFilterType`.
+ * Specifies the type of filter to use for excluding image tags from the repository's mutability setting.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ecr-repository-imagetagmutabilityexclusionfiltertype.html}
+ */
+export type ImageTagMutabilityExclusionFilterType = "WILDCARD";
 /**
  * Type definition for `AWS::ECR::Repository.LifecyclePolicy`.
  * The ``LifecyclePolicy`` property type specifies a lifecycle policy. For information about lifecycle policy syntax, see [Lifecycle policy template](https://docs.aws.amazon.com/AmazonECR/latest/userguide/LifecyclePolicies.html) in the *Amazon ECR User Guide*.

package/lib/AWS-ECR-RepositoryCreationTemplate.d.ts

@@ -29,7 +29,12 @@ export type ECRRepositoryCreationTemplateProperties = {
     /**
      * The tag mutability setting for the repository. If this parameter is omitted, the default setting of ``MUTABLE`` will be used which will allow image tags to be overwritten. If ``IMMUTABLE`` is specified, all image tags within the repository will be immutable which will prevent them from being overwritten.
      */
-    ImageTagMutability?: "MUTABLE" | "IMMUTABLE";
+    ImageTagMutability?: "MUTABLE" | "IMMUTABLE" | "IMMUTABLE_WITH_EXCLUSION" | "MUTABLE_WITH_EXCLUSION";
+    /**
+     * @minLength `1`
+     * @maxLength `5`
+     */
+    ImageTagMutabilityExclusionFilters?: ImageTagMutabilityExclusionFilter[];
     /**
      * The lifecycle policy to use for repositories created using the template.
      * @minLength `100`
@@ -96,6 +101,23 @@ export type EncryptionConfiguration = {
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ecr-repositorycreationtemplate-encryptiontype.html}
  */
 export type EncryptionType = "AES256" | "KMS" | "KMS_DSSE";
+/**
+ * Type definition for `AWS::ECR::RepositoryCreationTemplate.ImageTagMutabilityExclusionFilter`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ecr-repositorycreationtemplate-imagetagmutabilityexclusionfilter.html}
+ */
+export type ImageTagMutabilityExclusionFilter = {
+    /**
+     * Specifies the type of filter to use for excluding image tags from the repository's mutability setting.
+     */
+    ImageTagMutabilityExclusionFilterType: "WILDCARD";
+    /**
+     * The value to use when filtering image tags.
+     * @minLength `1`
+     * @maxLength `128`
+     * @pattern `^[0-9a-zA-Z._*-]{1,128}`
+     */
+    ImageTagMutabilityExclusionFilterValue: string;
+};
 /**
  * Type definition for `AWS::ECR::RepositoryCreationTemplate.Tag`.
  * The metadata to apply to a resource to help you categorize and organize them. Each tag consists of a key and a value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

package/lib/AWS-ElasticLoadBalancingV2-Listener.d.ts

@@ -12,6 +12,7 @@ export type ElasticLoadBalancingV2ListenerProperties = {
     AlpnPolicy?: string[];
     /**
        * The default SSL server certificate for a secure listener. You must provide exactly one certificate if the listener protocol is HTTPS or TLS.
+       For an HTTPS listener, update requires some interruptions. For a TLS listener, update requires no interruption.
        To create a certificate list for a secure listener, use [AWS::ElasticLoadBalancingV2::ListenerCertificate](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-elasticloadbalancingv2-listenercertificate.html).
        */
     Certificates?: Certificate[];
@@ -21,7 +22,7 @@ export type ElasticLoadBalancingV2ListenerProperties = {
        */
     DefaultActions: Action[];
     /**
-     * The listener attributes.
+     * The listener attributes. Attributes that you do not modify retain their current values.
      */
     ListenerAttributes?: ListenerAttribute[];
     /**
@@ -42,7 +43,7 @@ export type ElasticLoadBalancingV2ListenerProperties = {
     Protocol?: string;
     /**
        * [HTTPS and TLS listeners] The security policy that defines which protocols and ciphers are supported. For more information, see [Security policies](https://docs.aws.amazon.com/elasticloadbalancing/latest/application/describe-ssl-policies.html) in the *Application Load Balancers Guide* and [Security policies](https://docs.aws.amazon.com/elasticloadbalancing/latest/network/describe-ssl-policies.html) in the *Network Load Balancers Guide*.
-       Updating the security policy can result in interruptions if the load balancer is handling a high volume of traffic. To decrease the possibility of an interruption if your load balancer is handling a high volume of traffic, create an additional load balancer or request an LCU reservation.
+       [HTTPS listeners] Updating the security policy can result in interruptions if the load balancer is handling a high volume of traffic. To decrease the possibility of an interruption if your load balancer is handling a high volume of traffic, create an additional load balancer or request an LCU reservation.
        */
     SslPolicy?: string;
 };
@@ -348,7 +349,7 @@ export type RedirectConfig = {
  */
 export type TargetGroupStickinessConfig = {
     /**
-     * The time period, in seconds, during which requests from a client should be routed to the same target group. The range is 1-604800 seconds (7 days).
+     * The time period, in seconds, during which requests from a client should be routed to the same target group. The range is 1-604800 seconds (7 days). You must specify this value when enabling target group stickiness.
      */
     DurationSeconds?: number;
     /**

package/lib/AWS-ElasticLoadBalancingV2-ListenerRule.d.ts

@@ -218,7 +218,7 @@ export type ForwardConfig = {
  */
 export type HostHeaderConfig = {
     /**
-       * The host names. The maximum size of each name is 128 characters. The comparison is case insensitive. The following wildcard characters are supported: * (matches 0 or more characters) and ? (matches exactly 1 character).
+       * The host names. The maximum size of each name is 128 characters. The comparison is case insensitive. The following wildcard characters are supported: * (matches 0 or more characters) and ? (matches exactly 1 character). You must include at least one "." character. You can include only alphabetical characters after the final "." character.
        If you specify multiple strings, the condition is satisfied if one of the strings matches the host name.
        */
     Values?: string[];
@@ -411,7 +411,7 @@ export type SourceIpConfig = {
  */
 export type TargetGroupStickinessConfig = {
     /**
-     * The time period, in seconds, during which requests from a client should be routed to the same target group. The range is 1-604800 seconds (7 days).
+     * The time period, in seconds, during which requests from a client should be routed to the same target group. The range is 1-604800 seconds (7 days). You must specify this value when enabling target group stickiness.
      */
     DurationSeconds?: number;
     /**

package/lib/AWS-ElasticLoadBalancingV2-LoadBalancer.d.ts

@@ -27,7 +27,7 @@ export type ElasticLoadBalancingV2LoadBalancerProperties = {
      */
     Ipv4IpamPoolId?: string;
     /**
-     * The load balancer attributes.
+     * The load balancer attributes. Attributes that you do not modify retain their current values.
      */
     LoadBalancerAttributes?: LoadBalancerAttribute[];
     /**

package/lib/AWS-EntityResolution-MatchingWorkflow.d.ts

@@ -151,6 +151,7 @@ export type ResolutionTechniques = {
     ProviderProperties?: ProviderProperties;
     ResolutionType?: ResolutionType;
     RuleBasedProperties?: RuleBasedProperties;
+    RuleConditionProperties?: RuleConditionProperties;
 };
 /**
  * Type definition for `AWS::EntityResolution::MatchingWorkflow.ResolutionType`.
@@ -187,6 +188,30 @@ export type RuleBasedProperties = {
      */
     Rules: Rule[];
 };
+/**
+ * Type definition for `AWS::EntityResolution::MatchingWorkflow.RuleCondition`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-entityresolution-matchingworkflow-rulecondition.html}
+ */
+export type RuleCondition = {
+    Condition?: string;
+    /**
+     * @minLength `0`
+     * @maxLength `255`
+     * @pattern `^[a-zA-Z_0-9- \t]*$`
+     */
+    RuleName?: string;
+};
+/**
+ * Type definition for `AWS::EntityResolution::MatchingWorkflow.RuleConditionProperties`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-entityresolution-matchingworkflow-ruleconditionproperties.html}
+ */
+export type RuleConditionProperties = {
+    /**
+     * @minLength `1`
+     * @maxLength `15`
+     */
+    Rules: RuleCondition[];
+};
 /**
  * Type definition for `AWS::EntityResolution::MatchingWorkflow.Tag`.
  * A key-value pair to associate with a resource

package/lib/AWS-Glue-Job.d.ts

@@ -96,7 +96,7 @@ export type GlueJobProperties = {
     /**
      * TThe type of predefined worker that is allocated when a job runs.
      */
-    WorkerType?: "Standard" | "G.1X" | "G.2X" | "G.025X" | "G.4X" | "G.8X" | "Z.2X";
+    WorkerType?: "Standard" | "G.1X" | "G.2X" | "G.025X" | "G.4X" | "G.8X" | "Z.2X" | "G.12X" | "G.16X" | "R.1X" | "R.2X" | "R.4X" | "R.8X";
 };
 /**
  * Type definition for `AWS::Glue::Job.ConnectionsList`.

package/lib/AWS-IoTSiteWise-ComputationModel.d.ts

@@ -0,0 +1,172 @@
+import { Resource as $Resource } from "@awboost/cfn-template-builder/template/resource";
+import type { ResourceOptions as $ResourceOptions } from "@awboost/cfn-template-builder/template";
+/**
+ * Resource schema for AWS::IoTSiteWise::ComputationModel.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotsitewise-computationmodel.html}
+ */
+export type IoTSiteWiseComputationModelProperties = {
+    /**
+     * The configuration for the computation model.
+     */
+    ComputationModelConfiguration: ComputationModelConfiguration;
+    /**
+     * The data binding for the computation model.
+     */
+    ComputationModelDataBinding: ComputationModelDataBinding;
+    /**
+     * A description about the computation model.
+     * @minLength `1`
+     * @maxLength `2048`
+     * @pattern `^[a-zA-Z0-9 _\-#$*!@]+$`
+     */
+    ComputationModelDescription?: string;
+    /**
+     * The name of the computation model.
+     * @minLength `1`
+     * @maxLength `256`
+     * @pattern `^[a-zA-Z0-9 _\-#$*!@]+$`
+     */
+    ComputationModelName: string;
+    /**
+     * An array of key-value pairs to apply to this resource.
+     */
+    Tags?: Tag[];
+};
+/**
+ * Attribute type definition for `AWS::IoTSiteWise::ComputationModel`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotsitewise-computationmodel.html#aws-resource-iotsitewise-computationmodel-return-values}
+ */
+export type IoTSiteWiseComputationModelAttributes = {
+    /**
+     * The ARN of the computation model.
+     * @minLength `1`
+     * @maxLength `1600`
+     * @pattern `^arn:aws(-cn|-us-gov)?:[a-zA-Z0-9-:/_\.]+$`
+     */
+    ComputationModelArn: string;
+    /**
+     * The ID of the computation model.
+     * @minLength `36`
+     * @maxLength `36`
+     * @pattern `^[0-9a-f]{8}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{12}$`
+     */
+    ComputationModelId: string;
+};
+/**
+ * Type definition for `AWS::IoTSiteWise::ComputationModel.AnomalyDetectionComputationModelConfiguration`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotsitewise-computationmodel-anomalydetectioncomputationmodelconfiguration.html}
+ */
+export type AnomalyDetectionComputationModelConfiguration = {
+    /**
+     * Input properties for anomaly detection.
+     * @minLength `4`
+     * @maxLength `67`
+     * @pattern `^\$\{[a-z][a-z0-9_]*\}$`
+     */
+    InputProperties: string;
+    /**
+     * Result property for anomaly detection.
+     * @minLength `4`
+     * @maxLength `67`
+     * @pattern `^\$\{[a-z][a-z0-9_]*\}$`
+     */
+    ResultProperty: string;
+};
+/**
+ * Type definition for `AWS::IoTSiteWise::ComputationModel.AssetModelPropertyBindingValue`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotsitewise-computationmodel-assetmodelpropertybindingvalue.html}
+ */
+export type AssetModelPropertyBindingValue = {
+    /**
+     * The ID of the asset model.
+     * @minLength `36`
+     * @maxLength `36`
+     * @pattern `^[0-9a-f]{8}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{12}$`
+     */
+    AssetModelId: string;
+    /**
+     * The ID of the asset model property.
+     * @minLength `36`
+     * @maxLength `36`
+     * @pattern `^[0-9a-f]{8}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{12}$`
+     */
+    PropertyId: string;
+};
+/**
+ * Type definition for `AWS::IoTSiteWise::ComputationModel.AssetPropertyBindingValue`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotsitewise-computationmodel-assetpropertybindingvalue.html}
+ */
+export type AssetPropertyBindingValue = {
+    /**
+     * The ID of the asset.
+     * @minLength `36`
+     * @maxLength `36`
+     * @pattern `^[0-9a-f]{8}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{12}$`
+     */
+    AssetId: string;
+    /**
+     * The ID of the asset property.
+     * @minLength `36`
+     * @maxLength `36`
+     * @pattern `^[0-9a-f]{8}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{12}$`
+     */
+    PropertyId: string;
+};
+/**
+ * Type definition for `AWS::IoTSiteWise::ComputationModel.ComputationModelConfiguration`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotsitewise-computationmodel-computationmodelconfiguration.html}
+ */
+export type ComputationModelConfiguration = {
+    /**
+     * Contains configuration for anomaly detection computation model.
+     */
+    AnomalyDetection?: AnomalyDetectionComputationModelConfiguration;
+};
+/**
+ * Type definition for `AWS::IoTSiteWise::ComputationModel.ComputationModelDataBinding`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotsitewise-computationmodel-computationmodeldatabinding.html}
+ */
+export type ComputationModelDataBinding = Record<string, ComputationModelDataBindingValue>;
+/**
+ * Type definition for `AWS::IoTSiteWise::ComputationModel.ComputationModelDataBindingValue`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotsitewise-computationmodel-computationmodeldatabindingvalue.html}
+ */
+export type ComputationModelDataBindingValue = {
+    /**
+     * Defines an asset model property binding.
+     */
+    AssetModelProperty?: AssetModelPropertyBindingValue;
+    /**
+     * Defines an asset property binding.
+     */
+    AssetProperty?: AssetPropertyBindingValue;
+    /**
+     * Defines a list of computation model binding values.
+     */
+    List?: ComputationModelDataBindingValue[];
+};
+/**
+ * Type definition for `AWS::IoTSiteWise::ComputationModel.Tag`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-iotsitewise-computationmodel-tag.html}
+ */
+export type Tag = {
+    /**
+     * @minLength `1`
+     * @maxLength `128`
+     */
+    Key: string;
+    /**
+     * @minLength `0`
+     * @maxLength `256`
+     */
+    Value: string;
+};
+/**
+ * Resource schema for AWS::IoTSiteWise::ComputationModel.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotsitewise-computationmodel.html}
+ */
+export declare class IoTSiteWiseComputationModel extends $Resource<"AWS::IoTSiteWise::ComputationModel", IoTSiteWiseComputationModelProperties, IoTSiteWiseComputationModelAttributes> {
+    static readonly Type = "AWS::IoTSiteWise::ComputationModel";
+    constructor(logicalId: string, properties: IoTSiteWiseComputationModelProperties, options?: $ResourceOptions);
+}
+//# sourceMappingURL=AWS-IoTSiteWise-ComputationModel.d.ts.map

package/lib/AWS-IoTSiteWise-ComputationModel.js

@@ -0,0 +1,12 @@
+import { Resource as $Resource } from "@awboost/cfn-template-builder/template/resource";
+/**
+ * Resource schema for AWS::IoTSiteWise::ComputationModel.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-iotsitewise-computationmodel.html}
+ */
+export class IoTSiteWiseComputationModel extends $Resource {
+    static Type = "AWS::IoTSiteWise::ComputationModel";
+    constructor(logicalId, properties, options) {
+        super(logicalId, IoTSiteWiseComputationModel.Type, properties, options);
+    }
+}
+//# sourceMappingURL=AWS-IoTSiteWise-ComputationModel.js.map

package/lib/AWS-Logs-Destination.d.ts

@@ -22,6 +22,10 @@ export type LogsDestinationProperties = {
      * @minLength `1`
      */
     RoleArn: string;
+    /**
+     * An array of key-value pairs to apply to this resource.
+     */
+    Tags?: Tag[];
     /**
      * The ARN of the physical target where the log events are delivered (for example, a Kinesis stream)
      * @minLength `1`
@@ -35,6 +39,25 @@ export type LogsDestinationProperties = {
 export type LogsDestinationAttributes = {
     Arn: string;
 };
+/**
+ * Type definition for `AWS::Logs::Destination.Tag`.
+ * A key-value pair to associate with a resource.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-logs-destination-tag.html}
+ */
+export type Tag = {
+    /**
+     * The key name of the tag. You can specify a value that is 1 to 128 Unicode characters in length and cannot be prefixed with aws:. You can use any of the following characters: the set of Unicode letters, digits, whitespace, _, ., :, /, =, +, - and @.
+     * @minLength `1`
+     * @maxLength `128`
+     */
+    Key: string;
+    /**
+     * The value for the tag. You can specify a value that is 0 to 256 Unicode characters in length. You can use any of the following characters: the set of Unicode letters, digits, whitespace, _, ., :, /, =, +, - and @.
+     * @minLength `0`
+     * @maxLength `256`
+     */
+    Value: string;
+};
 /**
  * The AWS::Logs::Destination resource specifies a CloudWatch Logs destination. A destination encapsulates a physical resource (such as an Amazon Kinesis data stream) and enables you to subscribe that resource to a stream of log events.
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-logs-destination.html}

package/lib/AWS-Logs-LogGroup.d.ts

@@ -44,6 +44,7 @@ export type LogsLogGroupProperties = {
      * @pattern `^[.\-_/#A-Za-z0-9]{1,512}\Z`
      */
     LogGroupName?: string;
+    ResourcePolicyDocument?: Record<string, any>;
     /**
        * The number of days to retain the log events in the specified log group. Possible values are: 1, 3, 5, 7, 14, 30, 60, 90, 120, 150, 180, 365, 400, 545, 731, 1096, 1827, 2192, 2557, 2922, 3288, and 3653.
        To set a log group so that its log events do not expire, use [DeleteRetentionPolicy](https://docs.aws.amazon.com/AmazonCloudWatchLogs/latest/APIReference/API_DeleteRetentionPolicy.html).

package/lib/AWS-MediaPackageV2-Channel.d.ts

@@ -92,6 +92,11 @@ export type InputSwitchConfiguration = {
      * <p>When true, AWS Elemental MediaPackage performs input switching based on the MQCS. Default is true. This setting is valid only when <code>InputType</code> is <code>CMAF</code>.</p>
      */
     MQCSInputSwitching?: boolean;
+    /**
+     * @min `1`
+     * @max `2`
+     */
+    PreferredInput?: number;
 };
 /**
  * Type definition for `AWS::MediaPackageV2::Channel.InputType`.