@awboost/cfn-resource-types 0.1.356 → 0.1.358

package/lib/AWS-DynamoDB-Table.d.ts

@@ -184,7 +184,7 @@ export type GlobalSecondaryIndex = {
        */
     KeySchema: KeySchema[];
     /**
-     * The maximum number of read and write units for the specified global secondary index. If you use this parameter, you must specify ``MaxReadRequestUnits``, ``MaxWriteRequestUnits``, or both.
+     * The maximum number of read and write units for the specified global secondary index. If you use this parameter, you must specify ``MaxReadRequestUnits``, ``MaxWriteRequestUnits``, or both. You must use either ``OnDemandThroughput`` or ``ProvisionedThroughput`` based on your table's capacity mode.
      */
     OnDemandThroughput?: OnDemandThroughput;
     /**
@@ -192,7 +192,7 @@ export type GlobalSecondaryIndex = {
      */
     Projection: Projection;
     /**
-       * Represents the provisioned throughput settings for the specified global secondary index.
+       * Represents the provisioned throughput settings for the specified global secondary index. You must use either ``OnDemandThroughput`` or ``ProvisionedThroughput`` based on your table's capacity mode.
        For current minimum and maximum provisioned throughput values, see [Service, Account, and Table Quotas](https://docs.aws.amazon.com/amazondynamodb/latest/developerguide/Limits.html) in the *Amazon DynamoDB Developer Guide*.
        */
     ProvisionedThroughput?: ProvisionedThroughput;

package/lib/AWS-EC2-Subnet.d.ts

@@ -63,7 +63,7 @@ export type EC2SubnetProperties = {
     Ipv6NetmaskLength?: number;
     /**
        * Indicates whether instances launched in this subnet receive a public IPv4 address. The default value is ``false``.
-        AWS charges for all public IPv4 addresses, including public IPv4 addresses associated with running instances and Elastic IP addresses. For more information, see the *Public IPv4 Address* tab on the [VPC pricing page](https://docs.aws.amazon.com/vpc/pricing/).
+       AWS charges for all public IPv4 addresses, including public IPv4 addresses associated with running instances and Elastic IP addresses. For more information, see the *Public IPv4 Address* tab on the [VPC pricing page](https://docs.aws.amazon.com/vpc/pricing/).
        */
     MapPublicIpOnLaunch?: boolean;
     /**
@@ -97,6 +97,12 @@ export type EC2SubnetProperties = {
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-subnet.html#aws-resource-ec2-subnet-return-values}
  */
 export type EC2SubnetAttributes = {
+    BlockPublicAccessStates: {
+        /**
+         * The mode of VPC BPA. Options here are off, block-bidirectional, block-ingress
+         */
+        InternetGatewayBlockMode: string;
+    };
     Ipv6CidrBlocks: string[];
     NetworkAclAssociationId: string;
     SubnetId: string;

package/lib/AWS-EC2-TrafficMirrorFilter.d.ts

@@ -1,12 +1,21 @@
 import { Resource as $Resource } from "@awboost/cfn-template-builder/template/resource";
 import type { ResourceOptions as $ResourceOptions } from "@awboost/cfn-template-builder/template";
 /**
- * Resource Type definition for AWS::EC2::TrafficMirrorFilter
+ * Resource schema for AWS::EC2::TrafficMirrorFilter
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-trafficmirrorfilter.html}
  */
 export type EC2TrafficMirrorFilterProperties = {
+    /**
+     * The description of a traffic mirror filter.
+     */
     Description?: string;
-    NetworkServices?: string[];
+    /**
+     * The network service that is associated with the traffic mirror filter.
+     */
+    NetworkServices?: TrafficMirrorNetworkService[];
+    /**
+     * The tags for a traffic mirror filter.
+     */
     Tags?: Tag[];
 };
 /**
@@ -14,6 +23,9 @@ export type EC2TrafficMirrorFilterProperties = {
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-trafficmirrorfilter.html#aws-resource-ec2-trafficmirrorfilter-return-values}
  */
 export type EC2TrafficMirrorFilterAttributes = {
+    /**
+     * The ID of a traffic mirror filter.
+     */
     Id: string;
 };
 /**
@@ -25,7 +37,13 @@ export type Tag = {
     Value: string;
 };
 /**
- * Resource Type definition for AWS::EC2::TrafficMirrorFilter
+ * Type definition for `AWS::EC2::TrafficMirrorFilter.TrafficMirrorNetworkService`.
+ * The network service traffic that is associated with the traffic mirror filter.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-trafficmirrorfilter-trafficmirrornetworkservice.html}
+ */
+export type TrafficMirrorNetworkService = "amazon-dns";
+/**
+ * Resource schema for AWS::EC2::TrafficMirrorFilter
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-trafficmirrorfilter.html}
  */
 export declare class EC2TrafficMirrorFilter extends $Resource<"AWS::EC2::TrafficMirrorFilter", EC2TrafficMirrorFilterProperties, EC2TrafficMirrorFilterAttributes> {

package/lib/AWS-EC2-TrafficMirrorFilter.js

@@ -1,6 +1,6 @@
 import { Resource as $Resource } from "@awboost/cfn-template-builder/template/resource";
 /**
- * Resource Type definition for AWS::EC2::TrafficMirrorFilter
+ * Resource schema for AWS::EC2::TrafficMirrorFilter
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-trafficmirrorfilter.html}
  */
 export class EC2TrafficMirrorFilter extends $Resource {

package/lib/AWS-Lambda-EventSourceMapping.d.ts

@@ -218,7 +218,7 @@ export type AmazonManagedKafkaEventSourceConfig = {
 };
 /**
  * Type definition for `AWS::Lambda::EventSourceMapping.DestinationConfig`.
- * A configuration object that specifies the destination of an event after Lambda processes it.
+ * A configuration object that specifies the destination of an event after Lambda processes it. For more information, see [Adding a destination](https://docs.aws.amazon.com/lambda/latest/dg/invocation-async-retain-records.html#invocation-async-destinations).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lambda-eventsourcemapping-destinationconfig.html}
  */
 export type DestinationConfig = {
@@ -305,7 +305,7 @@ export type MetricsConfig = {
 };
 /**
  * Type definition for `AWS::Lambda::EventSourceMapping.OnFailure`.
- * A destination for events that failed processing. See [Capturing records of Lambda asynchronous invocations](https://docs.aws.amazon.com/lambda/latest/dg/invocation-async-retain-records.html) for more information.
+ * A destination for events that failed processing. For more information, see [Adding a destination](https://docs.aws.amazon.com/lambda/latest/dg/invocation-async-retain-records.html#invocation-async-destinations).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lambda-eventsourcemapping-onfailure.html}
  */
 export type OnFailure = {
@@ -356,12 +356,8 @@ export type ScalingConfig = {
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lambda-eventsourcemapping-schemaregistryaccessconfig.html}
  */
 export type SchemaRegistryAccessConfig = {
-    /**
-     * The type of authentication Lambda uses to access your schema registry.
-     */
     Type?: "BASIC_AUTH" | "CLIENT_CERTIFICATE_TLS_AUTH" | "SERVER_ROOT_CA_CERTIFICATE";
     /**
-     * The URI of the secret (Secrets Manager secret ARN) to authenticate with your schema registry.
      * @minLength `1`
      * @maxLength `10000`
      * @pattern `arn:(aws[a-zA-Z0-9-]*):([a-zA-Z0-9\-])+:([a-z]{2}(-gov)?(-iso([a-z])?)?-[a-z]+-\d{1})?:(\d{12})?:(.*)`
@@ -374,23 +370,17 @@ export type SchemaRegistryAccessConfig = {
  */
 export type SchemaRegistryConfig = {
     /**
-     * An array of access configuration objects that tell Lambda how to authenticate with your schema registry.
      * @maxLength `2`
      */
     AccessConfigs?: SchemaRegistryAccessConfig[];
-    /**
-     * The record format that Lambda delivers to your function after schema validation.
-     */
     EventRecordFormat?: "JSON" | "SOURCE";
     /**
-     * The URI for your schema registry. The correct URI format depends on the type of schema registry you're using.
      * @minLength `1`
      * @maxLength `10000`
      * @pattern `[a-zA-Z0-9-/*:_+=.@-]*`
      */
     SchemaRegistryURI?: string;
     /**
-     * An array of schema validation configuration objects, which tell Lambda the message attributes you want to validate and filter using your schema registry.
      * @minLength `1`
      * @maxLength `2`
      */
@@ -401,9 +391,6 @@ export type SchemaRegistryConfig = {
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lambda-eventsourcemapping-schemavalidationconfig.html}
  */
 export type SchemaValidationConfig = {
-    /**
-     * The attribute you want your schema registry to validate and filter for.
-     */
     Attribute?: "KEY" | "VALUE";
 };
 /**

package/lib/AWS-MediaTailor-PlaybackConfiguration.d.ts

@@ -37,6 +37,10 @@ export type MediaTailorPlaybackConfigurationProperties = {
      * The configuration for pre-roll ad insertion.
      */
     LivePreRollConfiguration?: LivePreRollConfiguration;
+    /**
+     * The configuration that defines where AWS Elemental MediaTailor sends logs for the playback configuration.
+     */
+    LogConfiguration?: LogConfiguration;
     /**
      * The configuration for manifest processing rules. Manifest processing rules enable customization of the personalized manifests created by MediaTailor.
      */
@@ -124,6 +128,20 @@ export type AdMarkerPassthrough = {
      */
     Enabled?: boolean;
 };
+/**
+ * Type definition for `AWS::MediaTailor::PlaybackConfiguration.AdsInteractionLog`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-mediatailor-playbackconfiguration-adsinteractionlog.html}
+ */
+export type AdsInteractionLog = {
+    /**
+     * Indicates that MediaTailor won't emit the selected events in the logs for playback sessions that are initialized with this configuration.
+     */
+    ExcludeEventTypes?: string[];
+    /**
+     * Indicates that MediaTailor emits RAW_ADS_RESPONSE logs for playback sessions that are initialized with this configuration.
+     */
+    PublishOptInEventTypes?: string[];
+};
 /**
  * Type definition for `AWS::MediaTailor::PlaybackConfiguration.AvailSuppression`.
  * The configuration for avail suppression, also known as ad suppression. For more information about ad suppression, see Ad Suppression (https://docs.aws.amazon.com/mediatailor/latest/ug/ad-behavior.html).
@@ -209,6 +227,30 @@ export type LivePreRollConfiguration = {
      */
     MaxDurationSeconds?: number;
 };
+/**
+ * Type definition for `AWS::MediaTailor::PlaybackConfiguration.LogConfiguration`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-mediatailor-playbackconfiguration-logconfiguration.html}
+ */
+export type LogConfiguration = {
+    /**
+     * The event types that MediaTailor emits in logs for interactions with the ADS.
+     */
+    AdsInteractionLog?: AdsInteractionLog;
+    /**
+     * The method used for collecting logs from AWS Elemental MediaTailor. To configure MediaTailor to send logs directly to Amazon CloudWatch Logs, choose LEGACY_CLOUDWATCH. To configure MediaTailor to send logs to CloudWatch, which then vends the logs to your destination of choice, choose VENDED_LOGS. Supported destinations are CloudWatch Logs log group, Amazon S3 bucket, and Amazon Data Firehose stream. To use vended logs, you must configure the delivery destination in Amazon CloudWatch
+     */
+    EnabledLoggingStrategies?: string[];
+    /**
+     * The event types that MediaTailor emits in logs for interactions with the origin server.
+     */
+    ManifestServiceInteractionLog?: ManifestServiceInteractionLog;
+    /**
+     * The percentage of session logs that MediaTailor sends to your CloudWatch Logs account. For example, if your playback configuration has 1000 sessions and percentEnabled is set to 60, MediaTailor sends logs for 600 of the sessions to CloudWatch Logs. MediaTailor decides at random which of the playback configuration sessions to send logs for. If you want to view logs for a specific session, you can use the debug log mode.
+     * @min `0`
+     * @max `100`
+     */
+    PercentEnabled: number;
+};
 /**
  * Type definition for `AWS::MediaTailor::PlaybackConfiguration.ManifestProcessingRules`.
  * The configuration for manifest processing rules. Manifest processing rules enable customization of the personalized manifests created by MediaTailor.
@@ -220,6 +262,16 @@ export type ManifestProcessingRules = {
      */
     AdMarkerPassthrough?: AdMarkerPassthrough;
 };
+/**
+ * Type definition for `AWS::MediaTailor::PlaybackConfiguration.ManifestServiceInteractionLog`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-mediatailor-playbackconfiguration-manifestserviceinteractionlog.html}
+ */
+export type ManifestServiceInteractionLog = {
+    /**
+     * Indicates that MediaTailor won't emit the selected events in the logs for playback sessions that are initialized with this configuration.
+     */
+    ExcludeEventTypes?: string[];
+};
 /**
  * Type definition for `AWS::MediaTailor::PlaybackConfiguration.StreamingMediaFileConditioning`.
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-mediatailor-playbackconfiguration-streamingmediafileconditioning.html}

package/lib/AWS-RDS-DBCluster.d.ts

@@ -197,8 +197,8 @@ export type RDSDBClusterProperties = {
        * The life cycle type for this DB cluster.
         By default, this value is set to ``open-source-rds-extended-support``, which enrolls your DB cluster into Amazon RDS Extended Support. At the end of standard support, you can avoid charges for Extended Support by setting the value to ``open-source-rds-extended-support-disabled``. In this case, creating the DB cluster will fail if the DB major version is past its end of standard support date.
         You can use this setting to enroll your DB cluster into Amazon RDS Extended Support. With RDS Extended Support, you can run the selected major engine version on your DB cluster past the end of standard support for that engine version. For more information, see the following sections:
-        +  Amazon Aurora - [Using Amazon RDS Extended Support](https://docs.aws.amazon.com/AmazonRDS/latest/AuroraUserGuide/extended-support.html) in the *Amazon Aurora User Guide*
-        +  Amazon RDS - [Using Amazon RDS Extended Support](https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/extended-support.html) in the *Amazon RDS User Guide*
+        +  Amazon Aurora - [Amazon RDS Extended Support with Amazon Aurora](https://docs.aws.amazon.com/AmazonRDS/latest/AuroraUserGuide/extended-support.html) in the *Amazon Aurora User Guide*
+        +  Amazon RDS - [Amazon RDS Extended Support with Amazon RDS](https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/extended-support.html) in the *Amazon RDS User Guide*
         
        Valid for Cluster Type: Aurora DB clusters and Multi-AZ DB clusters
        Valid Values: ``open-source-rds-extended-support | open-source-rds-extended-support-disabled``

package/lib/AWS-RDS-DBInstance.d.ts

@@ -432,7 +432,7 @@ export type RDSDBInstanceProperties = {
        * The life cycle type for this DB instance.
         By default, this value is set to ``open-source-rds-extended-support``, which enrolls your DB instance into Amazon RDS Extended Support. At the end of standard support, you can avoid charges for Extended Support by setting the value to ``open-source-rds-extended-support-disabled``. In this case, creating the DB instance will fail if the DB major version is past its end of standard support date.
         This setting applies only to RDS for MySQL and RDS for PostgreSQL. For Amazon Aurora DB instances, the life cycle type is managed by the DB cluster.
-       You can use this setting to enroll your DB instance into Amazon RDS Extended Support. With RDS Extended Support, you can run the selected major engine version on your DB instance past the end of standard support for that engine version. For more information, see [Using Amazon RDS Extended Support](https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/extended-support.html) in the *Amazon RDS User Guide*.
+       You can use this setting to enroll your DB instance into Amazon RDS Extended Support. With RDS Extended Support, you can run the selected major engine version on your DB instance past the end of standard support for that engine version. For more information, see [Amazon RDS Extended Support with Amazon RDS](https://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/extended-support.html) in the *Amazon RDS User Guide*.
        Valid Values: ``open-source-rds-extended-support | open-source-rds-extended-support-disabled``
        Default: ``open-source-rds-extended-support``
        */

package/lib/AWS-RUM-AppMonitor.d.ts

@@ -152,7 +152,7 @@ export type DeobfuscationConfiguration = {
     JavaScriptSourceMaps?: {
         /**
          * The S3Uri of the bucket or folder that stores the source map files. It is required if status is ENABLED.
-         * @pattern `^s3://[a-z0-9][-.a-z0-9]{1,61}(?:/[-!_*'().a-z0-9A-Z]+(?:/[-!_*'().a-z0-9A-Z]+)*)?/?$`
+         * @pattern `^s3://[a-z0-9][-.a-z0-9]{1,62}(?:/[-!_*'().a-z0-9A-Z]+(?:/[-!_*'().a-z0-9A-Z]+)*)?/?$`
          */
         S3Uri?: string;
         /**

package/lib/AWS-Synthetics-Canary.d.ts

@@ -161,6 +161,10 @@ export type RunConfig = {
      * Environment variable key-value pairs.
      */
     EnvironmentVariables?: Record<string, string>;
+    /**
+     * Provide ephemeralStorage available for canary in MB
+     */
+    EphemeralStorage?: number;
     /**
      * Provide maximum memory available for canary in MB
      */

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@awboost/cfn-resource-types",
-  "version": "0.1.356",
+  "version": "0.1.358",
   "publishConfig": {
     "access": "public"
   },