@awboost/cfn-resource-types 0.1.322 → 0.1.323

package/lib/AWS-EC2-LaunchTemplate.d.ts

@@ -99,7 +99,7 @@ export type BaselinePerformanceFactors = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.BlockDeviceMapping`.
  * Specifies a block device mapping for a launch template. You must specify ``DeviceName`` plus exactly one of the following properties: ``Ebs``, ``NoDevice``, or ``VirtualName``.
-  ``BlockDeviceMapping`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
+ ``BlockDeviceMapping`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-blockdevicemapping.html}
  */
 export type BlockDeviceMapping = {
@@ -123,15 +123,15 @@ export type BlockDeviceMapping = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.CapacityReservationSpecification`.
  * Specifies an instance's Capacity Reservation targeting option. You can specify only one option at a time.
-  ``CapacityReservationSpecification`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
+ ``CapacityReservationSpecification`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-capacityreservationspecification.html}
  */
 export type CapacityReservationSpecification = {
     /**
        * Indicates the instance's Capacity Reservation preferences. Possible preferences include:
-        +   ``capacity-reservations-only`` - The instance will only run in a Capacity Reservation or Capacity Reservation group. If capacity isn't available, the instance will fail to launch.
-        +   ``open`` - The instance can run in any ``open`` Capacity Reservation that has matching attributes (instance type, platform, Availability Zone, tenancy).
-        +   ``none`` - The instance avoids running in a Capacity Reservation even if one is available. The instance runs in On-Demand capacity.
+        +  ``capacity-reservations-only`` - The instance will only run in a Capacity Reservation or Capacity Reservation group. If capacity isn't available, the instance will fail to launch.
+        +  ``open`` - The instance can run in any ``open`` Capacity Reservation that has matching attributes (instance type, platform, Availability Zone, tenancy).
+        +  ``none`` - The instance avoids running in a Capacity Reservation even if one is available. The instance runs in On-Demand capacity.
        */
     CapacityReservationPreference?: string;
     /**
@@ -142,7 +142,7 @@ export type CapacityReservationSpecification = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.CapacityReservationTarget`.
  * Specifies a target Capacity Reservation.
-  ``CapacityReservationTarget`` is a property of the [Amazon EC2 LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html) property type.
+ ``CapacityReservationTarget`` is a property of the [Amazon EC2 LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html) property type.
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-capacityreservationtarget.html}
  */
 export type CapacityReservationTarget = {
@@ -188,7 +188,7 @@ export type Cpu = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.CpuOptions`.
  * Specifies the CPU options for an instance. For more information, see [Optimize CPU options](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/instance-optimize-cpu.html) in the *User Guide*.
-  ``CpuOptions`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
+ ``CpuOptions`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-cpuoptions.html}
  */
 export type CpuOptions = {
@@ -208,7 +208,7 @@ export type CpuOptions = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.CreditSpecification`.
  * Specifies the credit option for CPU usage of a T2, T3, or T3a instance.
-  ``CreditSpecification`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
+ ``CreditSpecification`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-creditspecification.html}
  */
 export type CreditSpecification = {
@@ -221,7 +221,7 @@ export type CreditSpecification = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.Ebs`.
  * Parameters for a block device for an EBS volume in an Amazon EC2 launch template.
-  ``Ebs`` is a property of [AWS::EC2::LaunchTemplate BlockDeviceMapping](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-blockdevicemapping.html).
+ ``Ebs`` is a property of [AWS::EC2::LaunchTemplate BlockDeviceMapping](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-blockdevicemapping.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-ebs.html}
  */
 export type Ebs = {
@@ -236,9 +236,9 @@ export type Ebs = {
     /**
        * The number of I/O operations per second (IOPS). For ``gp3``, ``io1``, and ``io2`` volumes, this represents the number of IOPS that are provisioned for the volume. For ``gp2`` volumes, this represents the baseline performance of the volume and the rate at which the volume accumulates I/O credits for bursting.
        The following are the supported values for each volume type:
-        +   ``gp3``: 3,000 - 16,000 IOPS
-        +   ``io1``: 100 - 64,000 IOPS
-        +   ``io2``: 100 - 256,000 IOPS
+        +  ``gp3``: 3,000 - 16,000 IOPS
+        +  ``io1``: 100 - 64,000 IOPS
+        +  ``io2``: 100 - 256,000 IOPS
         
        For ``io2`` volumes, you can achieve up to 256,000 IOPS on [instances built on the Nitro System](https://docs.aws.amazon.com/ec2/latest/instancetypes/ec2-nitro-instances.html). On other instances, you can achieve performance up to 32,000 IOPS.
        This parameter is supported for ``io1``, ``io2``, and ``gp3`` volumes only.
@@ -259,11 +259,11 @@ export type Ebs = {
     Throughput?: number;
     /**
        * The size of the volume, in GiBs. You must specify either a snapshot ID or a volume size. The following are the supported volumes sizes for each volume type:
-        +   ``gp2`` and ``gp3``: 1 - 16,384 GiB
-        +   ``io1``: 4 - 16,384 GiB
-        +   ``io2``: 4 - 65,536 GiB
-        +   ``st1`` and ``sc1``: 125 - 16,384 GiB
-        +   ``standard``: 1 - 1024 GiB
+        +  ``gp2`` and ``gp3``: 1 - 16,384 GiB
+        +  ``io1``: 4 - 16,384 GiB
+        +  ``io2``: 4 - 65,536 GiB
+        +  ``st1`` and ``sc1``: 125 - 16,384 GiB
+        +  ``standard``: 1 - 1024 GiB
        */
     VolumeSize?: number;
     /**
@@ -275,7 +275,7 @@ export type Ebs = {
  * Type definition for `AWS::EC2::LaunchTemplate.ElasticGpuSpecification`.
  * Amazon Elastic Graphics reached end of life on January 8, 2024.
   Specifies a specification for an Elastic GPU for an Amazon EC2 launch template.
-  ``ElasticGpuSpecification`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
+ ``ElasticGpuSpecification`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-elasticgpuspecification.html}
  */
 export type ElasticGpuSpecification = {
@@ -325,7 +325,7 @@ export type EnclaveOptions = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.HibernationOptions`.
  * Specifies whether your instance is configured for hibernation. This parameter is valid only if the instance meets the [hibernation prerequisites](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Hibernate.html#hibernating-prerequisites). For more information, see [Hibernate Your Instance](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/Hibernate.html) in the *Amazon EC2 User Guide*.
-  ``HibernationOptions`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
+ ``HibernationOptions`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-hibernationoptions.html}
  */
 export type HibernationOptions = {
@@ -339,7 +339,7 @@ export type HibernationOptions = {
  * Type definition for `AWS::EC2::LaunchTemplate.IamInstanceProfile`.
  * Specifies an IAM instance profile, which is a container for an IAM role for your instance. You can use an IAM role to distribute your AWS credentials to your instances.
  If you are creating the launch template for use with an ASlong group, you can specify either the name or the ARN of the instance profile, but not both.
-  ``IamInstanceProfile`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
+ ``IamInstanceProfile`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-iaminstanceprofile.html}
  */
 export type IamInstanceProfile = {
@@ -355,7 +355,7 @@ export type IamInstanceProfile = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.InstanceMarketOptions`.
  * Specifies the market (purchasing) option for an instance.
-  ``InstanceMarketOptions`` is a property of the [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
+ ``InstanceMarketOptions`` is a property of the [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-instancemarketoptions.html}
  */
 export type InstanceMarketOptions = {
@@ -374,11 +374,11 @@ export type InstanceMarketOptions = {
  You must specify ``VCpuCount`` and ``MemoryMiB``. All other attributes are optional. Any unspecified optional attribute is set to its default.
  When you specify multiple attributes, you get instance types that satisfy all of the specified attributes. If you specify multiple values for an attribute, you get instance types that satisfy any of the specified values.
  To limit the list of instance types from which Amazon EC2 can identify matching instance types, you can use one of the following parameters, but not both in the same request:
-  +   ``AllowedInstanceTypes`` - The instance types to include in the list. All other instance types are ignored, even if they match your specified attributes.
-  +   ``ExcludedInstanceTypes`` - The instance types to exclude from the list, even if they match your specified attributes.
+  +  ``AllowedInstanceTypes`` - The instance types to include in the list. All other instance types are ignored, even if they match your specified attributes.
+  +  ``ExcludedInstanceTypes`` - The instance types to exclude from the list, even if they match your specified attributes.
   
   If you specify ``InstanceRequirements``, you can't specify ``InstanceType``.
- Attribute-based instance type selection is only supported when using Auto Scaling groups, EC2 Fleet, and Spot Fleet to launch instances. If you plan to use the launch template in the [launch instance wizard](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-launch-instance-wizard.html), or with the [RunInstances](https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RunInstances.html) API or [AWS::EC2::Instance](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-instance.html) AWS CloudFormation resource, you can't specify ``InstanceRequirements``.
+ Attribute-based instance type selection is only supported when using Auto Scaling groups, EC2 Fleet, and Spot Fleet to launch instances. If you plan to use the launch template in the [launch instance wizard](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-launch-instance-wizard.html), or with the [RunInstances](https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RunInstances.html) API or [AWS::EC2::Instance](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-instance.html)AWS CloudFormation resource, you can't specify ``InstanceRequirements``.
   For more information, see [Specify attributes for instance type selection for EC2 Fleet or Spot Fleet](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-fleet-attribute-based-instance-type-selection.html) and [Spot placement score](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-placement-score.html) in the *Amazon EC2 User Guide*.
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-instancerequirements.html}
  */
@@ -427,6 +427,7 @@ export type InstanceRequirements = {
        * The accelerator types that must be on the instance type.
         +  For instance types with FPGA accelerators, specify ``fpga``.
         +  For instance types with GPU accelerators, specify ``gpu``.
+        +  For instance types with Inference accelerators, specify ``inference``.
         
        Default: Any accelerator type
        */
@@ -572,7 +573,7 @@ export type InstanceRequirements = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.Ipv4PrefixSpecification`.
  * Specifies an IPv4 prefix for a network interface.
-  ``Ipv4PrefixSpecification`` is a property of [AWS::EC2::LaunchTemplate NetworkInterface](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-networkinterface.html).
+ ``Ipv4PrefixSpecification`` is a property of [AWS::EC2::LaunchTemplate NetworkInterface](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-networkinterface.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-ipv4prefixspecification.html}
  */
 export type Ipv4PrefixSpecification = {
@@ -584,7 +585,7 @@ export type Ipv4PrefixSpecification = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.Ipv6Add`.
  * Specifies an IPv6 address in an Amazon EC2 launch template.
-  ``Ipv6Add`` is a property of [AWS::EC2::LaunchTemplate NetworkInterface](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-networkinterface.html).
+ ``Ipv6Add`` is a property of [AWS::EC2::LaunchTemplate NetworkInterface](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-networkinterface.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-ipv6add.html}
  */
 export type Ipv6Add = {
@@ -596,7 +597,7 @@ export type Ipv6Add = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.Ipv6PrefixSpecification`.
  * Specifies an IPv6 prefix for a network interface.
-  ``Ipv6PrefixSpecification`` is a property of [AWS::EC2::LaunchTemplate NetworkInterface](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-networkinterface.html).
+ ``Ipv6PrefixSpecification`` is a property of [AWS::EC2::LaunchTemplate NetworkInterface](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-networkinterface.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-ipv6prefixspecification.html}
  */
 export type Ipv6PrefixSpecification = {
@@ -689,11 +690,11 @@ export type LaunchTemplateData = {
        You must specify ``VCpuCount`` and ``MemoryMiB``. All other attributes are optional. Any unspecified optional attribute is set to its default.
        When you specify multiple attributes, you get instance types that satisfy all of the specified attributes. If you specify multiple values for an attribute, you get instance types that satisfy any of the specified values.
        To limit the list of instance types from which Amazon EC2 can identify matching instance types, you can use one of the following parameters, but not both in the same request:
-        +   ``AllowedInstanceTypes`` - The instance types to include in the list. All other instance types are ignored, even if they match your specified attributes.
-        +   ``ExcludedInstanceTypes`` - The instance types to exclude from the list, even if they match your specified attributes.
+        +  ``AllowedInstanceTypes`` - The instance types to include in the list. All other instance types are ignored, even if they match your specified attributes.
+        +  ``ExcludedInstanceTypes`` - The instance types to exclude from the list, even if they match your specified attributes.
         
         If you specify ``InstanceRequirements``, you can't specify ``InstanceType``.
-       Attribute-based instance type selection is only supported when using Auto Scaling groups, EC2 Fleet, and Spot Fleet to launch instances. If you plan to use the launch template in the [launch instance wizard](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-launch-instance-wizard.html), or with the [RunInstances](https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RunInstances.html) API or [AWS::EC2::Instance](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-instance.html) AWS CloudFormation resource, you can't specify ``InstanceRequirements``.
+       Attribute-based instance type selection is only supported when using Auto Scaling groups, EC2 Fleet, and Spot Fleet to launch instances. If you plan to use the launch template in the [launch instance wizard](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-launch-instance-wizard.html), or with the [RunInstances](https://docs.aws.amazon.com/AWSEC2/latest/APIReference/API_RunInstances.html) API or [AWS::EC2::Instance](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-instance.html)AWS CloudFormation resource, you can't specify ``InstanceRequirements``.
         For more information, see [Specify attributes for instance type selection for EC2 Fleet or Spot Fleet](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-fleet-attribute-based-instance-type-selection.html) and [Spot placement score](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-placement-score.html) in the *Amazon EC2 User Guide*.
        */
     InstanceRequirements?: InstanceRequirements;
@@ -774,7 +775,7 @@ export type LaunchTemplateData = {
  * Type definition for `AWS::EC2::LaunchTemplate.LaunchTemplateElasticInferenceAccelerator`.
  * Amazon Elastic Inference is no longer available.
   Specifies an elastic inference accelerator.
-  ``LaunchTemplateElasticInferenceAccelerator`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
+ ``LaunchTemplateElasticInferenceAccelerator`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplateelasticinferenceaccelerator.html}
  */
 export type LaunchTemplateElasticInferenceAccelerator = {
@@ -792,7 +793,7 @@ export type LaunchTemplateElasticInferenceAccelerator = {
  * Type definition for `AWS::EC2::LaunchTemplate.LaunchTemplateTagSpecification`.
  * Specifies the tags to apply to the launch template during creation.
  To specify the tags for the resources that are created during instance launch, use [AWS::EC2::LaunchTemplate TagSpecification](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-tagspecification.html).
-  ``LaunchTemplateTagSpecification`` is a property of [AWS::EC2::LaunchTemplate](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-launchtemplate.html).
+ ``LaunchTemplateTagSpecification`` is a property of [AWS::EC2::LaunchTemplate](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ec2-launchtemplate.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatetagspecification.html}
  */
 export type LaunchTemplateTagSpecification = {
@@ -808,7 +809,7 @@ export type LaunchTemplateTagSpecification = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.LicenseSpecification`.
  * Specifies a license configuration for an instance.
-  ``LicenseSpecification`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
+ ``LicenseSpecification`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-licensespecification.html}
  */
 export type LicenseSpecification = {
@@ -861,7 +862,7 @@ export type MemoryMiB = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.MetadataOptions`.
  * The metadata options for the instance. For more information, see [Instance metadata and user data](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-instance-metadata.html) in the *Amazon EC2 User Guide*.
-  ``MetadataOptions`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
+ ``MetadataOptions`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-metadataoptions.html}
  */
 export type MetadataOptions = {
@@ -883,8 +884,8 @@ export type MetadataOptions = {
     HttpPutResponseHopLimit?: number;
     /**
        * Indicates whether IMDSv2 is required.
-        +   ``optional`` - IMDSv2 is optional. You can choose whether to send a session token in your instance metadata retrieval requests. If you retrieve IAM role credentials without a session token, you receive the IMDSv1 role credentials. If you retrieve IAM role credentials using a valid session token, you receive the IMDSv2 role credentials.
-        +   ``required`` - IMDSv2 is required. You must send a session token in your instance metadata retrieval requests. With this option, retrieving the IAM role credentials always returns IMDSv2 credentials; IMDSv1 credentials are not available.
+        +  ``optional`` - IMDSv2 is optional. You can choose whether to send a session token in your instance metadata retrieval requests. If you retrieve IAM role credentials without a session token, you receive the IMDSv1 role credentials. If you retrieve IAM role credentials using a valid session token, you receive the IMDSv2 role credentials.
+        +  ``required`` - IMDSv2 is required. You must send a session token in your instance metadata retrieval requests. With this option, retrieving the IAM role credentials always returns IMDSv2 credentials; IMDSv1 credentials are not available.
         
        Default: If the value of ``ImdsSupport`` for the Amazon Machine Image (AMI) for your instance is ``v2.0``, the default is ``required``.
        */
@@ -898,7 +899,7 @@ export type MetadataOptions = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.Monitoring`.
  * Specifies whether detailed monitoring is enabled for an instance. For more information about detailed monitoring, see [Enable or turn off detailed monitoring for your instances](https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-cloudwatch-new.html) in the *User Guide*.
-  ``Monitoring`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
+ ``Monitoring`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-monitoring.html}
  */
 export type Monitoring = {
@@ -926,7 +927,7 @@ export type NetworkBandwidthGbps = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.NetworkInterface`.
  * Specifies the parameters for a network interface.
-  ``NetworkInterface`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
+ ``NetworkInterface`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-networkinterface.html}
  */
 export type NetworkInterface = {
@@ -937,7 +938,7 @@ export type NetworkInterface = {
     AssociateCarrierIpAddress?: boolean;
     /**
        * Associates a public IPv4 address with eth0 for a new network interface.
-        AWS charges for all public IPv4 addresses, including public IPv4 addresses associated with running instances and Elastic IP addresses. For more information, see the *Public IPv4 Address* tab on the [Amazon VPC pricing page](https://docs.aws.amazon.com/vpc/pricing/).
+       AWS charges for all public IPv4 addresses, including public IPv4 addresses associated with running instances and Elastic IP addresses. For more information, see the *Public IPv4 Address* tab on the [Amazon VPC pricing page](https://docs.aws.amazon.com/vpc/pricing/).
        */
     AssociatePublicIpAddress?: boolean;
     /**
@@ -1055,7 +1056,7 @@ export type NetworkPerformanceOptions = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.Placement`.
  * Specifies the placement of an instance.
-  ``Placement`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
+ ``Placement`` is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-placement.html}
  */
 export type Placement = {
@@ -1118,7 +1119,7 @@ export type PrivateDnsNameOptions = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.PrivateIpAdd`.
  * Specifies a secondary private IPv4 address for a network interface.
-  ``PrivateIpAdd`` is a property of [AWS::EC2::LaunchTemplate NetworkInterface](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-networkinterface.html).
+ ``PrivateIpAdd`` is a property of [AWS::EC2::LaunchTemplate NetworkInterface](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-networkinterface.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-privateipadd.html}
  */
 export type PrivateIpAdd = {
@@ -1142,13 +1143,13 @@ export type Reference = {
         Ensure that you specify the correct value for the instance family. The instance family is everything before the period (``.``) in the instance type name. For example, in the instance type ``c6i.large``, the instance family is ``c6i``, not ``c6``. For more information, see [Amazon EC2 instance type naming conventions](https://docs.aws.amazon.com/ec2/latest/instancetypes/instance-type-names.html) in *Amazon EC2 Instance Types*.
         The following instance families are *not supported* for performance protection:
         +   ``c1``
-        +   ``g3`` | ``g3s``
+        +  ``g3`` | ``g3s``
         +   ``hpc7g``
-        +   ``m1`` | ``m2``
-        +   ``mac1`` | ``mac2`` | ``mac2-m1ultra`` | ``mac2-m2`` | ``mac2-m2pro``
-        +   ``p3dn`` | ``p4d`` | ``p5``
+        +  ``m1`` | ``m2``
+        +  ``mac1`` | ``mac2`` | ``mac2-m1ultra`` | ``mac2-m2`` | ``mac2-m2pro``
+        +  ``p3dn`` | ``p4d`` | ``p5``
         +   ``t1``
-        +   ``u-12tb1`` | ``u-18tb1`` | ``u-24tb1`` | ``u-3tb1`` | ``u-6tb1`` | ``u-9tb1`` | ``u7i-12tb`` | ``u7in-16tb`` | ``u7in-24tb`` | ``u7in-32tb``
+        +  ``u-12tb1`` | ``u-18tb1`` | ``u-24tb1`` | ``u-3tb1`` | ``u-6tb1`` | ``u-9tb1`` | ``u7i-12tb`` | ``u7in-16tb`` | ``u7in-24tb`` | ``u7in-32tb``
         
        If you enable performance protection by specifying a supported instance family, the returned instance types will exclude the above unsupported instance families.
        */
@@ -1157,7 +1158,7 @@ export type Reference = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.SpotOptions`.
  * Specifies options for Spot Instances.
-  ``SpotOptions`` is a property of [AWS::EC2::LaunchTemplate InstanceMarketOptions](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata-instancemarketoptions.html).
+ ``SpotOptions`` is a property of [AWS::EC2::LaunchTemplate InstanceMarketOptions](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata-instancemarketoptions.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-spotoptions.html}
  */
 export type SpotOptions = {
@@ -1206,7 +1207,7 @@ export type Tag = {
 /**
  * Type definition for `AWS::EC2::LaunchTemplate.TagSpecification`.
  * Specifies the tags to apply to resources that are created during instance launch.
-  ``TagSpecification`` is a property type of [TagSpecifications](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html#cfn-ec2-launchtemplate-launchtemplatedata-tagspecifications). [TagSpecifications](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html#cfn-ec2-launchtemplate-launchtemplatedata-tagspecifications) is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
+ ``TagSpecification`` is a property type of [TagSpecifications](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html#cfn-ec2-launchtemplate-launchtemplatedata-tagspecifications). [TagSpecifications](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html#cfn-ec2-launchtemplate-launchtemplatedata-tagspecifications) is a property of [AWS::EC2::LaunchTemplate LaunchTemplateData](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-launchtemplatedata.html).
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ec2-launchtemplate-tagspecification.html}
  */
 export type TagSpecification = {

package/lib/AWS-ImageBuilder-DistributionConfiguration.d.ts

@@ -112,6 +112,10 @@ export type Distribution = {
      * region
      */
     Region: string;
+    /**
+     * The SSM parameter configurations to use for AMI distribution.
+     */
+    SsmParameterConfigurations?: SsmParameterConfiguration[];
 };
 /**
  * Type definition for `AWS::ImageBuilder::DistributionConfiguration.FastLaunchConfiguration`.
@@ -212,6 +216,25 @@ export type LaunchTemplateConfiguration = {
      */
     SetDefaultVersion?: boolean;
 };
+/**
+ * Type definition for `AWS::ImageBuilder::DistributionConfiguration.SsmParameterConfiguration`.
+ * The SSM parameter configuration for AMI distribution.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-imagebuilder-distributionconfiguration-ssmparameterconfiguration.html}
+ */
+export type SsmParameterConfiguration = {
+    /**
+     * The account ID for the AMI to update the parameter with.
+     */
+    AmiAccountId?: string;
+    /**
+     * The data type of the SSM parameter.
+     */
+    DataType?: "text" | "aws:ec2:image";
+    /**
+     * The name of the SSM parameter.
+     */
+    ParameterName: string;
+};
 /**
  * Type definition for `AWS::ImageBuilder::DistributionConfiguration.TargetContainerRepository`.
  * The destination repository for the container image.

package/lib/AWS-Lambda-Function.d.ts

@@ -5,7 +5,7 @@ import type { ResourceOptions as $ResourceOptions } from "@awboost/cfn-template-
  You set the package type to ``Image`` if the deployment package is a [container image](https://docs.aws.amazon.com/lambda/latest/dg/lambda-images.html). For these functions, include the URI of the container image in the ECR registry in the [ImageUri property of the Code property](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lambda-function-code.html#cfn-lambda-function-code-imageuri). You do not need to specify the handler and runtime properties.
  You set the package type to ``Zip`` if the deployment package is a [.zip file archive](https://docs.aws.amazon.com/lambda/latest/dg/gettingstarted-package.html#gettingstarted-package-zip). For these functions, specify the S3 location of your .zip file in the ``Code`` property. Alternatively, for Node.js and Python functions, you can define your function inline in the [ZipFile property of the Code property](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lambda-function-code.html#cfn-lambda-function-code-zipfile). In both cases, you must also specify the handler and runtime properties.
  You can use [code signing](https://docs.aws.amazon.com/lambda/latest/dg/configuration-codesigning.html) if your deployment package is a .zip file archive. To enable code signing for this function, specify the ARN of a code-signing configuration. When a user attempts to deploy a code package with ``UpdateFunctionCode``, Lambda checks that the code package has a valid signature from a trusted publisher. The code-signing configuration includes a set of signing profiles, which define the trusted publishers for this function.
- When you update a ``AWS::Lambda::Function`` resource, CFNshort calls the [UpdateFunctionConfiguration](https://docs.aws.amazon.com/lambda/latest/api/API_UpdateFunctionConfiguration.html) and [UpdateFunctionCode](https://docs.aws.amazon.com/lambda/latest/api/API_UpdateFunctionCode.html) LAM APIs under the hood. Because these calls happen sequentially, and invocations can happen between these calls, your function may encounter errors in the time between the calls. For example, if you remove an environment variable, and the code that references that environment variable in the same CFNshort update, you may see invocation errors related to a missing environment variable. To work around this, you can invoke your function against a version or alias by default, rather than the ``$LATEST`` version.
+ When you update a ``AWS::Lambda::Function`` resource, CFNshort calls the [UpdateFunctionConfiguration](https://docs.aws.amazon.com/lambda/latest/api/API_UpdateFunctionConfiguration.html) and [UpdateFunctionCode](https://docs.aws.amazon.com/lambda/latest/api/API_UpdateFunctionCode.html)LAM APIs under the hood. Because these calls happen sequentially, and invocations can happen between these calls, your function may encounter errors in the time between the calls. For example, if you remove an environment variable, and the code that references that environment variable in the same CFNshort update, you may see invocation errors related to a missing environment variable. To work around this, you can invoke your function against a version or alias by default, rather than the ``$LATEST`` version.
  Note that you configure [provisioned concurrency](https://docs.aws.amazon.com/lambda/latest/dg/provisioned-concurrency.html) on a ``AWS::Lambda::Version`` or a ``AWS::Lambda::Alias``.
  For a complete introduction to Lambda functions, see [What is Lambda?](https://docs.aws.amazon.com/lambda/latest/dg/lambda-welcome.html) in the *Lambda developer guide.*
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lambda-function.html}
@@ -210,7 +210,7 @@ export type Code = {
 };
 /**
  * Type definition for `AWS::Lambda::Function.DeadLetterConfig`.
- * The [dead-letter queue](https://docs.aws.amazon.com/lambda/latest/dg/invocation-async.html#dlq) for failed asynchronous invocations.
+ * The [dead-letter queue](https://docs.aws.amazon.com/lambda/latest/dg/invocation-async-retain-records.html#invocation-dlq) for failed asynchronous invocations.
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lambda-function-deadletterconfig.html}
  */
 export type DeadLetterConfig = {
@@ -330,11 +330,11 @@ export type RuntimeManagementConfig = {
     RuntimeVersionArn?: string;
     /**
        * Specify the runtime update mode.
-        +   *Auto (default)* - Automatically update to the most recent and secure runtime version using a [Two-phase runtime version rollout](https://docs.aws.amazon.com/lambda/latest/dg/runtimes-update.html#runtime-management-two-phase). This is the best choice for most customers to ensure they always benefit from runtime updates.
-        +   *FunctionUpdate* - LAM updates the runtime of you function to the most recent and secure runtime version when you update your function. This approach synchronizes runtime updates with function deployments, giving you control over when runtime updates are applied and allowing you to detect and mitigate rare runtime update incompatibilities early. When using this setting, you need to regularly update your functions to keep their runtime up-to-date.
-        +   *Manual* - You specify a runtime version in your function configuration. The function will use this runtime version indefinitely. In the rare case where a new runtime version is incompatible with an existing function, this allows you to roll back your function to an earlier runtime version. For more information, see [Roll back a runtime version](https://docs.aws.amazon.com/lambda/latest/dg/runtimes-update.html#runtime-management-rollback).
+        +  *Auto (default)* - Automatically update to the most recent and secure runtime version using a [Two-phase runtime version rollout](https://docs.aws.amazon.com/lambda/latest/dg/runtimes-update.html#runtime-management-two-phase). This is the best choice for most customers to ensure they always benefit from runtime updates.
+        +  *FunctionUpdate* - LAM updates the runtime of you function to the most recent and secure runtime version when you update your function. This approach synchronizes runtime updates with function deployments, giving you control over when runtime updates are applied and allowing you to detect and mitigate rare runtime update incompatibilities early. When using this setting, you need to regularly update your functions to keep their runtime up-to-date.
+        +  *Manual* - You specify a runtime version in your function configuration. The function will use this runtime version indefinitely. In the rare case where a new runtime version is incompatible with an existing function, this allows you to roll back your function to an earlier runtime version. For more information, see [Roll back a runtime version](https://docs.aws.amazon.com/lambda/latest/dg/runtimes-update.html#runtime-management-rollback).
         
-        *Valid Values*: ``Auto`` | ``FunctionUpdate`` | ``Manual``
+       *Valid Values*: ``Auto`` | ``FunctionUpdate`` | ``Manual``
        */
     UpdateRuntimeOn: "Auto" | "FunctionUpdate" | "Manual";
 };
@@ -407,7 +407,7 @@ export type VpcConfig = {
  You set the package type to ``Image`` if the deployment package is a [container image](https://docs.aws.amazon.com/lambda/latest/dg/lambda-images.html). For these functions, include the URI of the container image in the ECR registry in the [ImageUri property of the Code property](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lambda-function-code.html#cfn-lambda-function-code-imageuri). You do not need to specify the handler and runtime properties.
  You set the package type to ``Zip`` if the deployment package is a [.zip file archive](https://docs.aws.amazon.com/lambda/latest/dg/gettingstarted-package.html#gettingstarted-package-zip). For these functions, specify the S3 location of your .zip file in the ``Code`` property. Alternatively, for Node.js and Python functions, you can define your function inline in the [ZipFile property of the Code property](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lambda-function-code.html#cfn-lambda-function-code-zipfile). In both cases, you must also specify the handler and runtime properties.
  You can use [code signing](https://docs.aws.amazon.com/lambda/latest/dg/configuration-codesigning.html) if your deployment package is a .zip file archive. To enable code signing for this function, specify the ARN of a code-signing configuration. When a user attempts to deploy a code package with ``UpdateFunctionCode``, Lambda checks that the code package has a valid signature from a trusted publisher. The code-signing configuration includes a set of signing profiles, which define the trusted publishers for this function.
- When you update a ``AWS::Lambda::Function`` resource, CFNshort calls the [UpdateFunctionConfiguration](https://docs.aws.amazon.com/lambda/latest/api/API_UpdateFunctionConfiguration.html) and [UpdateFunctionCode](https://docs.aws.amazon.com/lambda/latest/api/API_UpdateFunctionCode.html) LAM APIs under the hood. Because these calls happen sequentially, and invocations can happen between these calls, your function may encounter errors in the time between the calls. For example, if you remove an environment variable, and the code that references that environment variable in the same CFNshort update, you may see invocation errors related to a missing environment variable. To work around this, you can invoke your function against a version or alias by default, rather than the ``$LATEST`` version.
+ When you update a ``AWS::Lambda::Function`` resource, CFNshort calls the [UpdateFunctionConfiguration](https://docs.aws.amazon.com/lambda/latest/api/API_UpdateFunctionConfiguration.html) and [UpdateFunctionCode](https://docs.aws.amazon.com/lambda/latest/api/API_UpdateFunctionCode.html)LAM APIs under the hood. Because these calls happen sequentially, and invocations can happen between these calls, your function may encounter errors in the time between the calls. For example, if you remove an environment variable, and the code that references that environment variable in the same CFNshort update, you may see invocation errors related to a missing environment variable. To work around this, you can invoke your function against a version or alias by default, rather than the ``$LATEST`` version.
  Note that you configure [provisioned concurrency](https://docs.aws.amazon.com/lambda/latest/dg/provisioned-concurrency.html) on a ``AWS::Lambda::Version`` or a ``AWS::Lambda::Alias``.
  For a complete introduction to Lambda functions, see [What is Lambda?](https://docs.aws.amazon.com/lambda/latest/dg/lambda-welcome.html) in the *Lambda developer guide.*
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lambda-function.html}

package/lib/AWS-Lambda-Function.js

@@ -4,7 +4,7 @@ import { Resource as $Resource } from "@awboost/cfn-template-builder/template/re
  You set the package type to ``Image`` if the deployment package is a [container image](https://docs.aws.amazon.com/lambda/latest/dg/lambda-images.html). For these functions, include the URI of the container image in the ECR registry in the [ImageUri property of the Code property](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lambda-function-code.html#cfn-lambda-function-code-imageuri). You do not need to specify the handler and runtime properties.
  You set the package type to ``Zip`` if the deployment package is a [.zip file archive](https://docs.aws.amazon.com/lambda/latest/dg/gettingstarted-package.html#gettingstarted-package-zip). For these functions, specify the S3 location of your .zip file in the ``Code`` property. Alternatively, for Node.js and Python functions, you can define your function inline in the [ZipFile property of the Code property](https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-lambda-function-code.html#cfn-lambda-function-code-zipfile). In both cases, you must also specify the handler and runtime properties.
  You can use [code signing](https://docs.aws.amazon.com/lambda/latest/dg/configuration-codesigning.html) if your deployment package is a .zip file archive. To enable code signing for this function, specify the ARN of a code-signing configuration. When a user attempts to deploy a code package with ``UpdateFunctionCode``, Lambda checks that the code package has a valid signature from a trusted publisher. The code-signing configuration includes a set of signing profiles, which define the trusted publishers for this function.
- When you update a ``AWS::Lambda::Function`` resource, CFNshort calls the [UpdateFunctionConfiguration](https://docs.aws.amazon.com/lambda/latest/api/API_UpdateFunctionConfiguration.html) and [UpdateFunctionCode](https://docs.aws.amazon.com/lambda/latest/api/API_UpdateFunctionCode.html) LAM APIs under the hood. Because these calls happen sequentially, and invocations can happen between these calls, your function may encounter errors in the time between the calls. For example, if you remove an environment variable, and the code that references that environment variable in the same CFNshort update, you may see invocation errors related to a missing environment variable. To work around this, you can invoke your function against a version or alias by default, rather than the ``$LATEST`` version.
+ When you update a ``AWS::Lambda::Function`` resource, CFNshort calls the [UpdateFunctionConfiguration](https://docs.aws.amazon.com/lambda/latest/api/API_UpdateFunctionConfiguration.html) and [UpdateFunctionCode](https://docs.aws.amazon.com/lambda/latest/api/API_UpdateFunctionCode.html)LAM APIs under the hood. Because these calls happen sequentially, and invocations can happen between these calls, your function may encounter errors in the time between the calls. For example, if you remove an environment variable, and the code that references that environment variable in the same CFNshort update, you may see invocation errors related to a missing environment variable. To work around this, you can invoke your function against a version or alias by default, rather than the ``$LATEST`` version.
  Note that you configure [provisioned concurrency](https://docs.aws.amazon.com/lambda/latest/dg/provisioned-concurrency.html) on a ``AWS::Lambda::Version`` or a ``AWS::Lambda::Alias``.
  For a complete introduction to Lambda functions, see [What is Lambda?](https://docs.aws.amazon.com/lambda/latest/dg/lambda-welcome.html) in the *Lambda developer guide.*
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-lambda-function.html}

package/lib/AWS-MediaTailor-PlaybackConfiguration.d.ts

@@ -5,6 +5,10 @@ import type { ResourceOptions as $ResourceOptions } from "@awboost/cfn-template-
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-mediatailor-playbackconfiguration.html}
  */
 export type MediaTailorPlaybackConfigurationProperties = {
+    /**
+     * <p>The setting that indicates what conditioning MediaTailor will perform on ads that the ad decision server (ADS) returns.</p>
+     */
+    AdConditioningConfiguration?: AdConditioningConfiguration;
     /**
      * The URL for the ad decision server (ADS). This includes the specification of static parameters and placeholders for dynamic parameters. AWS Elemental MediaTailor substitutes player-specific and session-specific parameters as needed when calling the ADS. Alternately, for testing you can provide a static VAST URL. The maximum length is 25,000 characters.
      */
@@ -101,6 +105,14 @@ export type MediaTailorPlaybackConfigurationAttributes = {
      */
     SessionInitializationEndpointPrefix: string;
 };
+/**
+ * Type definition for `AWS::MediaTailor::PlaybackConfiguration.AdConditioningConfiguration`.
+ * <p>The setting that indicates what conditioning MediaTailor will perform on ads that the ad decision server (ADS) returns.</p>
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-mediatailor-playbackconfiguration-adconditioningconfiguration.html}
+ */
+export type AdConditioningConfiguration = {
+    StreamingMediaFileConditioning: StreamingMediaFileConditioning;
+};
 /**
  * Type definition for `AWS::MediaTailor::PlaybackConfiguration.AdMarkerPassthrough`.
  * For HLS, when set to true, MediaTailor passes through EXT-X-CUE-IN, EXT-X-CUE-OUT, and EXT-X-SPLICEPOINT-SCTE35 ad markers from the origin manifest to the MediaTailor personalized manifest. No logic is applied to these ad markers. For example, if EXT-X-CUE-OUT has a value of 60, but no ads are filled for that ad break, MediaTailor will not set the value to 0.
@@ -208,6 +220,11 @@ export type ManifestProcessingRules = {
      */
     AdMarkerPassthrough?: AdMarkerPassthrough;
 };
+/**
+ * Type definition for `AWS::MediaTailor::PlaybackConfiguration.StreamingMediaFileConditioning`.
+ * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-mediatailor-playbackconfiguration-streamingmediafileconditioning.html}
+ */
+export type StreamingMediaFileConditioning = "TRANSCODE" | "NONE";
 /**
  * Type definition for `AWS::MediaTailor::PlaybackConfiguration.Tag`.
  * @see {@link https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-mediatailor-playbackconfiguration-tag.html}

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@awboost/cfn-resource-types",
-  "version": "0.1.322",
+  "version": "0.1.323",
   "publishConfig": {
     "access": "public"
   },