@averay/codeformat 0.2.1 → 0.2.3

package/vendor/react/event-loop/src/LoopInterface.php

@@ -0,0 +1,472 @@
+<?php
+
+namespace React\EventLoop;
+
+interface LoopInterface
+{
+    /**
+     * [Advanced] Register a listener to be notified when a stream is ready to read.
+     *
+     * Note that this low-level API is considered advanced usage.
+     * Most use cases should probably use the higher-level
+     * [readable Stream API](https://github.com/reactphp/stream#readablestreaminterface)
+     * instead.
+     *
+     * The first parameter MUST be a valid stream resource that supports
+     * checking whether it is ready to read by this loop implementation.
+     * A single stream resource MUST NOT be added more than once.
+     * Instead, either call [`removeReadStream()`](#removereadstream) first or
+     * react to this event with a single listener and then dispatch from this
+     * listener. This method MAY throw an `Exception` if the given resource type
+     * is not supported by this loop implementation.
+     *
+     * The second parameter MUST be a listener callback function that accepts
+     * the stream resource as its only parameter.
+     * If you don't use the stream resource inside your listener callback function
+     * you MAY use a function which has no parameters at all.
+     *
+     * The listener callback function MUST NOT throw an `Exception`.
+     * The return value of the listener callback function will be ignored and has
+     * no effect, so for performance reasons you're recommended to not return
+     * any excessive data structures.
+     *
+     * If you want to access any variables within your callback function, you
+     * can bind arbitrary data to a callback closure like this:
+     *
+     * ```php
+     * $loop->addReadStream($stream, function ($stream) use ($name) {
+     *     echo $name . ' said: ' . fread($stream);
+     * });
+     * ```
+     *
+     * See also [example #11](examples).
+     *
+     * You can invoke [`removeReadStream()`](#removereadstream) to remove the
+     * read event listener for this stream.
+     *
+     * The execution order of listeners when multiple streams become ready at
+     * the same time is not guaranteed.
+     *
+     * @param resource $stream   The PHP stream resource to check.
+     * @param callable $listener Invoked when the stream is ready.
+     * @throws \Exception if the given resource type is not supported by this loop implementation
+     * @see self::removeReadStream()
+     */
+    public function addReadStream($stream, $listener);
+
+    /**
+     * [Advanced] Register a listener to be notified when a stream is ready to write.
+     *
+     * Note that this low-level API is considered advanced usage.
+     * Most use cases should probably use the higher-level
+     * [writable Stream API](https://github.com/reactphp/stream#writablestreaminterface)
+     * instead.
+     *
+     * The first parameter MUST be a valid stream resource that supports
+     * checking whether it is ready to write by this loop implementation.
+     * A single stream resource MUST NOT be added more than once.
+     * Instead, either call [`removeWriteStream()`](#removewritestream) first or
+     * react to this event with a single listener and then dispatch from this
+     * listener. This method MAY throw an `Exception` if the given resource type
+     * is not supported by this loop implementation.
+     *
+     * The second parameter MUST be a listener callback function that accepts
+     * the stream resource as its only parameter.
+     * If you don't use the stream resource inside your listener callback function
+     * you MAY use a function which has no parameters at all.
+     *
+     * The listener callback function MUST NOT throw an `Exception`.
+     * The return value of the listener callback function will be ignored and has
+     * no effect, so for performance reasons you're recommended to not return
+     * any excessive data structures.
+     *
+     * If you want to access any variables within your callback function, you
+     * can bind arbitrary data to a callback closure like this:
+     *
+     * ```php
+     * $loop->addWriteStream($stream, function ($stream) use ($name) {
+     *     fwrite($stream, 'Hello ' . $name);
+     * });
+     * ```
+     *
+     * See also [example #12](examples).
+     *
+     * You can invoke [`removeWriteStream()`](#removewritestream) to remove the
+     * write event listener for this stream.
+     *
+     * The execution order of listeners when multiple streams become ready at
+     * the same time is not guaranteed.
+     *
+     * Some event loop implementations are known to only trigger the listener if
+     * the stream *becomes* readable (edge-triggered) and may not trigger if the
+     * stream has already been readable from the beginning.
+     * This also implies that a stream may not be recognized as readable when data
+     * is still left in PHP's internal stream buffers.
+     * As such, it's recommended to use `stream_set_read_buffer($stream, 0);`
+     * to disable PHP's internal read buffer in this case.
+     *
+     * @param resource $stream   The PHP stream resource to check.
+     * @param callable $listener Invoked when the stream is ready.
+     * @throws \Exception if the given resource type is not supported by this loop implementation
+     * @see self::removeWriteStream()
+     */
+    public function addWriteStream($stream, $listener);
+
+    /**
+     * Remove the read event listener for the given stream.
+     *
+     * Removing a stream from the loop that has already been removed or trying
+     * to remove a stream that was never added or is invalid has no effect.
+     *
+     * @param resource $stream The PHP stream resource.
+     */
+    public function removeReadStream($stream);
+
+    /**
+     * Remove the write event listener for the given stream.
+     *
+     * Removing a stream from the loop that has already been removed or trying
+     * to remove a stream that was never added or is invalid has no effect.
+     *
+     * @param resource $stream The PHP stream resource.
+     */
+    public function removeWriteStream($stream);
+
+    /**
+     * Enqueue a callback to be invoked once after the given interval.
+     *
+     * The second parameter MUST be a timer callback function that accepts
+     * the timer instance as its only parameter.
+     * If you don't use the timer instance inside your timer callback function
+     * you MAY use a function which has no parameters at all.
+     *
+     * The timer callback function MUST NOT throw an `Exception`.
+     * The return value of the timer callback function will be ignored and has
+     * no effect, so for performance reasons you're recommended to not return
+     * any excessive data structures.
+     *
+     * This method returns a timer instance. The same timer instance will also be
+     * passed into the timer callback function as described above.
+     * You can invoke [`cancelTimer`](#canceltimer) to cancel a pending timer.
+     * Unlike [`addPeriodicTimer()`](#addperiodictimer), this method will ensure
+     * the callback will be invoked only once after the given interval.
+     *
+     * ```php
+     * $loop->addTimer(0.8, function () {
+     *     echo 'world!' . PHP_EOL;
+     * });
+     *
+     * $loop->addTimer(0.3, function () {
+     *     echo 'hello ';
+     * });
+     * ```
+     *
+     * See also [example #1](examples).
+     *
+     * If you want to access any variables within your callback function, you
+     * can bind arbitrary data to a callback closure like this:
+     *
+     * ```php
+     * function hello($name, LoopInterface $loop)
+     * {
+     *     $loop->addTimer(1.0, function () use ($name) {
+     *         echo "hello $name\n";
+     *     });
+     * }
+     *
+     * hello('Tester', $loop);
+     * ```
+     *
+     * This interface does not enforce any particular timer resolution, so
+     * special care may have to be taken if you rely on very high precision with
+     * millisecond accuracy or below. Event loop implementations SHOULD work on
+     * a best effort basis and SHOULD provide at least millisecond accuracy
+     * unless otherwise noted. Many existing event loop implementations are
+     * known to provide microsecond accuracy, but it's generally not recommended
+     * to rely on this high precision.
+     *
+     * Similarly, the execution order of timers scheduled to execute at the
+     * same time (within its possible accuracy) is not guaranteed.
+     *
+     * This interface suggests that event loop implementations SHOULD use a
+     * monotonic time source if available. Given that a monotonic time source is
+     * only available as of PHP 7.3 by default, event loop implementations MAY
+     * fall back to using wall-clock time.
+     * While this does not affect many common use cases, this is an important
+     * distinction for programs that rely on a high time precision or on systems
+     * that are subject to discontinuous time adjustments (time jumps).
+     * This means that if you schedule a timer to trigger in 30s and then adjust
+     * your system time forward by 20s, the timer SHOULD still trigger in 30s.
+     * See also [event loop implementations](#loop-implementations) for more details.
+     *
+     * @param int|float $interval The number of seconds to wait before execution.
+     * @param callable  $callback The callback to invoke.
+     *
+     * @return TimerInterface
+     */
+    public function addTimer($interval, $callback);
+
+    /**
+     * Enqueue a callback to be invoked repeatedly after the given interval.
+     *
+     * The second parameter MUST be a timer callback function that accepts
+     * the timer instance as its only parameter.
+     * If you don't use the timer instance inside your timer callback function
+     * you MAY use a function which has no parameters at all.
+     *
+     * The timer callback function MUST NOT throw an `Exception`.
+     * The return value of the timer callback function will be ignored and has
+     * no effect, so for performance reasons you're recommended to not return
+     * any excessive data structures.
+     *
+     * This method returns a timer instance. The same timer instance will also be
+     * passed into the timer callback function as described above.
+     * Unlike [`addTimer()`](#addtimer), this method will ensure the callback
+     * will be invoked infinitely after the given interval or until you invoke
+     * [`cancelTimer`](#canceltimer).
+     *
+     * ```php
+     * $timer = $loop->addPeriodicTimer(0.1, function () {
+     *     echo 'tick!' . PHP_EOL;
+     * });
+     *
+     * $loop->addTimer(1.0, function () use ($loop, $timer) {
+     *     $loop->cancelTimer($timer);
+     *     echo 'Done' . PHP_EOL;
+     * });
+     * ```
+     *
+     * See also [example #2](examples).
+     *
+     * If you want to limit the number of executions, you can bind
+     * arbitrary data to a callback closure like this:
+     *
+     * ```php
+     * function hello($name, LoopInterface $loop)
+     * {
+     *     $n = 3;
+     *     $loop->addPeriodicTimer(1.0, function ($timer) use ($name, $loop, &$n) {
+     *         if ($n > 0) {
+     *             --$n;
+     *             echo "hello $name\n";
+     *         } else {
+     *             $loop->cancelTimer($timer);
+     *         }
+     *     });
+     * }
+     *
+     * hello('Tester', $loop);
+     * ```
+     *
+     * This interface does not enforce any particular timer resolution, so
+     * special care may have to be taken if you rely on very high precision with
+     * millisecond accuracy or below. Event loop implementations SHOULD work on
+     * a best effort basis and SHOULD provide at least millisecond accuracy
+     * unless otherwise noted. Many existing event loop implementations are
+     * known to provide microsecond accuracy, but it's generally not recommended
+     * to rely on this high precision.
+     *
+     * Similarly, the execution order of timers scheduled to execute at the
+     * same time (within its possible accuracy) is not guaranteed.
+     *
+     * This interface suggests that event loop implementations SHOULD use a
+     * monotonic time source if available. Given that a monotonic time source is
+     * only available as of PHP 7.3 by default, event loop implementations MAY
+     * fall back to using wall-clock time.
+     * While this does not affect many common use cases, this is an important
+     * distinction for programs that rely on a high time precision or on systems
+     * that are subject to discontinuous time adjustments (time jumps).
+     * This means that if you schedule a timer to trigger in 30s and then adjust
+     * your system time forward by 20s, the timer SHOULD still trigger in 30s.
+     * See also [event loop implementations](#loop-implementations) for more details.
+     *
+     * Additionally, periodic timers may be subject to timer drift due to
+     * re-scheduling after each invocation. As such, it's generally not
+     * recommended to rely on this for high precision intervals with millisecond
+     * accuracy or below.
+     *
+     * @param int|float $interval The number of seconds to wait before execution.
+     * @param callable  $callback The callback to invoke.
+     *
+     * @return TimerInterface
+     */
+    public function addPeriodicTimer($interval, $callback);
+
+    /**
+     * Cancel a pending timer.
+     *
+     * See also [`addPeriodicTimer()`](#addperiodictimer) and [example #2](examples).
+     *
+     * Calling this method on a timer instance that has not been added to this
+     * loop instance or on a timer that has already been cancelled has no effect.
+     *
+     * @param TimerInterface $timer The timer to cancel.
+     *
+     * @return void
+     */
+    public function cancelTimer(TimerInterface $timer);
+
+    /**
+     * Schedule a callback to be invoked on a future tick of the event loop.
+     *
+     * This works very much similar to timers with an interval of zero seconds,
+     * but does not require the overhead of scheduling a timer queue.
+     *
+     * The tick callback function MUST be able to accept zero parameters.
+     *
+     * The tick callback function MUST NOT throw an `Exception`.
+     * The return value of the tick callback function will be ignored and has
+     * no effect, so for performance reasons you're recommended to not return
+     * any excessive data structures.
+     *
+     * If you want to access any variables within your callback function, you
+     * can bind arbitrary data to a callback closure like this:
+     *
+     * ```php
+     * function hello($name, LoopInterface $loop)
+     * {
+     *     $loop->futureTick(function () use ($name) {
+     *         echo "hello $name\n";
+     *     });
+     * }
+     *
+     * hello('Tester', $loop);
+     * ```
+     *
+     * Unlike timers, tick callbacks are guaranteed to be executed in the order
+     * they are enqueued.
+     * Also, once a callback is enqueued, there's no way to cancel this operation.
+     *
+     * This is often used to break down bigger tasks into smaller steps (a form
+     * of cooperative multitasking).
+     *
+     * ```php
+     * $loop->futureTick(function () {
+     *     echo 'b';
+     * });
+     * $loop->futureTick(function () {
+     *     echo 'c';
+     * });
+     * echo 'a';
+     * ```
+     *
+     * See also [example #3](examples).
+     *
+     * @param callable $listener The callback to invoke.
+     *
+     * @return void
+     */
+    public function futureTick($listener);
+
+    /**
+     * Register a listener to be notified when a signal has been caught by this process.
+     *
+     * This is useful to catch user interrupt signals or shutdown signals from
+     * tools like `supervisor` or `systemd`.
+     *
+     * The second parameter MUST be a listener callback function that accepts
+     * the signal as its only parameter.
+     * If you don't use the signal inside your listener callback function
+     * you MAY use a function which has no parameters at all.
+     *
+     * The listener callback function MUST NOT throw an `Exception`.
+     * The return value of the listener callback function will be ignored and has
+     * no effect, so for performance reasons you're recommended to not return
+     * any excessive data structures.
+     *
+     * ```php
+     * $loop->addSignal(SIGINT, function (int $signal) {
+     *     echo 'Caught user interrupt signal' . PHP_EOL;
+     * });
+     * ```
+     *
+     * See also [example #4](examples).
+     *
+     * Signaling is only available on Unix-like platforms, Windows isn't
+     * supported due to operating system limitations.
+     * This method may throw a `BadMethodCallException` if signals aren't
+     * supported on this platform, for example when required extensions are
+     * missing.
+     *
+     * **Note: A listener can only be added once to the same signal, any
+     * attempts to add it more than once will be ignored.**
+     *
+     * @param int $signal
+     * @param callable $listener
+     *
+     * @throws \BadMethodCallException when signals aren't supported on this
+     *     platform, for example when required extensions are missing.
+     *
+     * @return void
+     */
+    public function addSignal($signal, $listener);
+
+    /**
+     * Removes a previously added signal listener.
+     *
+     * ```php
+     * $loop->removeSignal(SIGINT, $listener);
+     * ```
+     *
+     * Any attempts to remove listeners that aren't registered will be ignored.
+     *
+     * @param int $signal
+     * @param callable $listener
+     *
+     * @return void
+     */
+    public function removeSignal($signal, $listener);
+
+    /**
+     * Run the event loop until there are no more tasks to perform.
+     *
+     * For many applications, this method is the only directly visible
+     * invocation on the event loop.
+     * As a rule of thumb, it is usually recommended to attach everything to the
+     * same loop instance and then run the loop once at the bottom end of the
+     * application.
+     *
+     * ```php
+     * $loop->run();
+     * ```
+     *
+     * This method will keep the loop running until there are no more tasks
+     * to perform. In other words: This method will block until the last
+     * timer, stream and/or signal has been removed.
+     *
+     * Likewise, it is imperative to ensure the application actually invokes
+     * this method once. Adding listeners to the loop and missing to actually
+     * run it will result in the application exiting without actually waiting
+     * for any of the attached listeners.
+     *
+     * This method MUST NOT be called while the loop is already running.
+     * This method MAY be called more than once after it has explicitly been
+     * [`stop()`ped](#stop) or after it automatically stopped because it
+     * previously did no longer have anything to do.
+     *
+     * @return void
+     */
+    public function run();
+
+    /**
+     * Instruct a running event loop to stop.
+     *
+     * This method is considered advanced usage and should be used with care.
+     * As a rule of thumb, it is usually recommended to let the loop stop
+     * only automatically when it no longer has anything to do.
+     *
+     * This method can be used to explicitly instruct the event loop to stop:
+     *
+     * ```php
+     * $loop->addTimer(3.0, function () use ($loop) {
+     *     $loop->stop();
+     * });
+     * ```
+     *
+     * Calling this method on a loop instance that is not currently running or
+     * on a loop instance that has already been stopped has no effect.
+     *
+     * @return void
+     */
+    public function stop();
+}

package/vendor/react/event-loop/src/SignalsHandler.php

@@ -0,0 +1,63 @@
+<?php
+
+namespace React\EventLoop;
+
+/**
+ * @internal
+ */
+final class SignalsHandler
+{
+    private $signals = array();
+
+    public function add($signal, $listener)
+    {
+        if (!isset($this->signals[$signal])) {
+            $this->signals[$signal] = array();
+        }
+
+        if (\in_array($listener, $this->signals[$signal])) {
+            return;
+        }
+
+        $this->signals[$signal][] = $listener;
+    }
+
+    public function remove($signal, $listener)
+    {
+        if (!isset($this->signals[$signal])) {
+            return;
+        }
+
+        $index = \array_search($listener, $this->signals[$signal], true);
+        unset($this->signals[$signal][$index]);
+
+        if (isset($this->signals[$signal]) && \count($this->signals[$signal]) === 0) {
+            unset($this->signals[$signal]);
+        }
+    }
+
+    public function call($signal)
+    {
+        if (!isset($this->signals[$signal])) {
+            return;
+        }
+
+        foreach ($this->signals[$signal] as $listener) {
+            \call_user_func($listener, $signal);
+        }
+    }
+
+    public function count($signal)
+    {
+        if (!isset($this->signals[$signal])) {
+            return 0;
+        }
+
+        return \count($this->signals[$signal]);
+    }
+
+    public function isEmpty()
+    {
+        return !$this->signals;
+    }
+}