@audiofab-io/fv1-core 0.6.0 → 0.6.1

package/blocks/gain_mix/mixer4.atl

@@ -1,152 +1,152 @@
----
-{
-  "type": "math.mixer4",
-  "category": "Gain/Mixing",
-  "name": "4:1 Mixer",
-  "description": "Mixes 4 audio inputs with optional gain control",
-  "inputs": [
-    {
-      "id": "input1",
-      "name": "Input 1",
-      "type": "audio"
-    },
-    {
-      "id": "input2",
-      "name": "Input 2",
-      "type": "audio"
-    },
-    {
-      "id": "input3",
-      "name": "Input 3",
-      "type": "audio"
-    },
-    {
-      "id": "input4",
-      "name": "Input 4",
-      "type": "audio"
-    },
-    {
-      "id": "level_1",
-      "name": "Level 1",
-      "type": "control"
-    },
-    {
-      "id": "level_2",
-      "name": "Level 2",
-      "type": "control"
-    },
-    {
-      "id": "level_3",
-      "name": "Level 3",
-      "type": "control"
-    },
-    {
-      "id": "level_4",
-      "name": "Level 4",
-      "type": "control"
-    }
-  ],
-  "outputs": [
-    {
-      "id": "output",
-      "name": "Output",
-      "type": "audio"
-    }
-  ],
-  "parameters": [
-    {
-      "id": "gain1",
-      "name": "Input Gain 1",
-      "type": "number",
-      "min": -18,
-      "max": 0,
-      "default": -6,
-      "conversion": "DBLEVEL"
-    },
-    {
-      "id": "gain2",
-      "name": "Input Gain 2",
-      "type": "number",
-      "min": -18,
-      "max": 0,
-      "default": -6,
-      "conversion": "DBLEVEL"
-    },
-    {
-      "id": "gain3",
-      "name": "Input Gain 3",
-      "type": "number",
-      "min": -18,
-      "max": 0,
-      "default": -6,
-      "conversion": "DBLEVEL"
-    },
-    {
-      "id": "gain4",
-      "name": "Input Gain 4",
-      "type": "number",
-      "min": -18,
-      "max": 0,
-      "default": -6,
-      "conversion": "DBLEVEL"
-    }
-  ],
-  "color": "#2468f2"
-}
----
-@section header
-@comment "Generated from spincad source file Mixer_4_to_1.spincad"
-
-@section main
-;REGISTERS 
-// we dont read input 1 unless it's connected
-@if pinConnected(Input 1)
-	rdax    ${input.input1}, ${gain1}    ;read input signal
-// if level 1 is connected we multiply by level 1
-@if pinConnected(Level 1)
-		mulx ${input.level_1}
-@endif
-	wrax ${output.output}, 0.0
-@endif
-@if pinConnected(Input 2)
-	rdax ${input.input2}, ${gain2}
-@if pinConnected(Level 2)
-		mulx ${input.level_2}
-@endif
-@if pinConnected(Input 1)
-		rdax ${output.output}, 1.0
-@endif
-	wrax ${output.output}, 0.0
-@endif
-@if pinConnected(Input 3)
-	rdax ${input.input3}, ${gain3}
-@if pinConnected(Level 3)
-		mulx ${input.level_3}
-@endif
-@if pinConnected(Input 1)
-		rdax ${output.output}, 1.0
-@else
-@if pinConnected(Input 2)
-			rdax ${output.output}, 1.0
-@endif
-@endif
-	wrax ${output.output}, 0.0
-@endif
-@if pinConnected(Input 4)
-	rdax ${input.input4}, ${gain4}
-@if pinConnected(Level 4)
-		mulx ${input.level_4}
-@endif
-@if pinConnected(Input 1)
-		rdax ${output.output}, 1.0
-@else
-@if pinConnected(Input 2)
-			rdax ${output.output}, 1.0
-@else
-@if pinConnected(Input 3)
-				rdax ${output.output}, 1.0
-@endif
-@endif
-@endif
-	wrax ${output.output}, 0.0
+---
+{
+  "type": "math.mixer4",
+  "category": "Gain/Mixing",
+  "name": "4:1 Mixer",
+  "description": "Mixes 4 audio inputs with optional gain control",
+  "inputs": [
+    {
+      "id": "input1",
+      "name": "Input 1",
+      "type": "audio"
+    },
+    {
+      "id": "input2",
+      "name": "Input 2",
+      "type": "audio"
+    },
+    {
+      "id": "input3",
+      "name": "Input 3",
+      "type": "audio"
+    },
+    {
+      "id": "input4",
+      "name": "Input 4",
+      "type": "audio"
+    },
+    {
+      "id": "level_1",
+      "name": "Level 1",
+      "type": "control"
+    },
+    {
+      "id": "level_2",
+      "name": "Level 2",
+      "type": "control"
+    },
+    {
+      "id": "level_3",
+      "name": "Level 3",
+      "type": "control"
+    },
+    {
+      "id": "level_4",
+      "name": "Level 4",
+      "type": "control"
+    }
+  ],
+  "outputs": [
+    {
+      "id": "output",
+      "name": "Output",
+      "type": "audio"
+    }
+  ],
+  "parameters": [
+    {
+      "id": "gain1",
+      "name": "Input Gain 1",
+      "type": "number",
+      "min": -18,
+      "max": 0,
+      "default": -6,
+      "conversion": "DBLEVEL"
+    },
+    {
+      "id": "gain2",
+      "name": "Input Gain 2",
+      "type": "number",
+      "min": -18,
+      "max": 0,
+      "default": -6,
+      "conversion": "DBLEVEL"
+    },
+    {
+      "id": "gain3",
+      "name": "Input Gain 3",
+      "type": "number",
+      "min": -18,
+      "max": 0,
+      "default": -6,
+      "conversion": "DBLEVEL"
+    },
+    {
+      "id": "gain4",
+      "name": "Input Gain 4",
+      "type": "number",
+      "min": -18,
+      "max": 0,
+      "default": -6,
+      "conversion": "DBLEVEL"
+    }
+  ],
+  "color": "#2468f2"
+}
+---
+@section header
+@comment "Generated from spincad source file Mixer_4_to_1.spincad"
+
+@section main
+;REGISTERS 
+// we dont read input 1 unless it's connected
+@if pinConnected(Input 1)
+	rdax    ${input.input1}, ${gain1}    ;read input signal
+// if level 1 is connected we multiply by level 1
+@if pinConnected(Level 1)
+		mulx ${input.level_1}
+@endif
+	wrax ${output.output}, 0.0
+@endif
+@if pinConnected(Input 2)
+	rdax ${input.input2}, ${gain2}
+@if pinConnected(Level 2)
+		mulx ${input.level_2}
+@endif
+@if pinConnected(Input 1)
+		rdax ${output.output}, 1.0
+@endif
+	wrax ${output.output}, 0.0
+@endif
+@if pinConnected(Input 3)
+	rdax ${input.input3}, ${gain3}
+@if pinConnected(Level 3)
+		mulx ${input.level_3}
+@endif
+@if pinConnected(Input 1)
+		rdax ${output.output}, 1.0
+@else
+@if pinConnected(Input 2)
+			rdax ${output.output}, 1.0
+@endif
+@endif
+	wrax ${output.output}, 0.0
+@endif
+@if pinConnected(Input 4)
+	rdax ${input.input4}, ${gain4}
+@if pinConnected(Level 4)
+		mulx ${input.level_4}
+@endif
+@if pinConnected(Input 1)
+		rdax ${output.output}, 1.0
+@else
+@if pinConnected(Input 2)
+			rdax ${output.output}, 1.0
+@else
+@if pinConnected(Input 3)
+				rdax ${output.output}, 1.0
+@endif
+@endif
+@endif
+	wrax ${output.output}, 0.0
 @endif

package/blocks/gain_mix/volume.atl

@@ -1,51 +1,51 @@
----
-{
-  "type": "math.volume",
-  "category": "Gain/Mixing",
-  "name": "Volume",
-  "description": "Applies a gain to the input signal",
-  "inputs": [
-    {
-      "id": "input",
-      "name": "Input",
-      "type": "audio"
-    },
-    {
-      "id": "volume",
-      "name": "Volume",
-      "type": "control"
-    }
-  ],
-  "outputs": [
-    {
-      "id": "output",
-      "name": "Output",
-      "type": "audio"
-    }
-  ],
-  "parameters": [
-    {
-      "id": "gain",
-      "name": "Input Gain",
-      "type": "number",
-      "min": -24,
-      "max": 0,
-      "default": -6,
-      "conversion": "DBLEVEL"
-    }
-  ],
-  "color": "#2468f2"
-}
----
-@section header
-@comment "Generated from spincad source file ${input.volume}.spincad"
-
-@section main
-;REGISTERS 
-@if pinConnected(${input.input})
-rdax    ${input.input}, ${gain}    ;read ${input.input} signal
-@if pinConnected(${input.volume})
-mulx ${input.volume}
-@endif
-wrax    ${output.output},0    ;${output.output} in ACC and lf1 
+---
+{
+  "type": "math.volume",
+  "category": "Gain/Mixing",
+  "name": "Volume",
+  "description": "Applies a gain to the input signal",
+  "inputs": [
+    {
+      "id": "input",
+      "name": "Input",
+      "type": "audio"
+    },
+    {
+      "id": "volume",
+      "name": "Volume",
+      "type": "control"
+    }
+  ],
+  "outputs": [
+    {
+      "id": "output",
+      "name": "Output",
+      "type": "audio"
+    }
+  ],
+  "parameters": [
+    {
+      "id": "gain",
+      "name": "Input Gain",
+      "type": "number",
+      "min": -24,
+      "max": 0,
+      "default": -6,
+      "conversion": "DBLEVEL"
+    }
+  ],
+  "color": "#2468f2"
+}
+---
+@section header
+@comment "Generated from spincad source file ${input.volume}.spincad"
+
+@section main
+;REGISTERS 
+@if pinConnected(${input.input})
+rdax    ${input.input}, ${gain}    ;read ${input.input} signal
+@if pinConnected(${input.volume})
+mulx ${input.volume}
+@endif
+wrax    ${output.output},0    ;${output.output} in ACC and lf1 
 @endif

package/blocks/io/adc.atl

@@ -1,53 +1,53 @@
----
-{
-  "type": "input.adc",
-  "name": "ADC Input",
-  "category": "Input/Output",
-  "description": "Reads audio from an analog input (ADC) with adjustable gain.",
-  "color": "#2196F3",
-  "width": 150,
-  "labelTemplate": "ADC ${param.adcNumber == 0 ? 'L' : 'R'}",
-  "inputs": [],
-  "outputs": [
-    {
-      "id": "out",
-      "name": "Audio",
-      "type": "audio"
-    }
-  ],
-  "parameters": [
-    {
-      "id": "adcNumber",
-      "name": "ADC Number",
-      "type": "select",
-      "default": 0,
-      "options": [
-        {
-          "label": "ADCL",
-          "value": 0
-        },
-        {
-          "label": "ADCR",
-          "value": 1
-        }
-      ]
-    },
-    {
-      "id": "gain",
-      "name": "Gain",
-      "type": "number",
-      "default": 1,
-      "min": 0,
-      "max": 1.9999,
-      "step": 0.01
-    }
-  ]
-}
----
-@section input
-@if adcNumber == 0
-rdax ADCL, ${param.gain}
-@else
-rdax ADCR, ${param.gain}
-@endif
-wrax ${output.out}, 0
+---
+{
+  "type": "input.adc",
+  "name": "ADC Input",
+  "category": "Input/Output",
+  "description": "Reads audio from an analog input (ADC) with adjustable gain.",
+  "color": "#2196F3",
+  "width": 150,
+  "labelTemplate": "ADC ${param.adcNumber == 0 ? 'L' : 'R'}",
+  "inputs": [],
+  "outputs": [
+    {
+      "id": "out",
+      "name": "Audio",
+      "type": "audio"
+    }
+  ],
+  "parameters": [
+    {
+      "id": "adcNumber",
+      "name": "ADC Number",
+      "type": "select",
+      "default": 0,
+      "options": [
+        {
+          "label": "ADCL",
+          "value": 0
+        },
+        {
+          "label": "ADCR",
+          "value": 1
+        }
+      ]
+    },
+    {
+      "id": "gain",
+      "name": "Gain",
+      "type": "number",
+      "default": 1,
+      "min": 0,
+      "max": 1.9999,
+      "step": 0.01
+    }
+  ]
+}
+---
+@section input
+@if adcNumber == 0
+rdax ADCL, ${param.gain}
+@else
+rdax ADCR, ${param.gain}
+@endif
+wrax ${output.out}, 0

package/blocks/io/dac.atl

@@ -1,61 +1,61 @@
----
-{
-  "type": "output.dac",
-  "name": "DAC Output",
-  "category": "Input/Output",
-  "description": "Writes audio to an analog output (DAC) with adjustable gain.",
-  "color": "#F44336",
-  "width": 150,
-  "inputs": [
-    {
-      "id": "in",
-      "name": "Audio",
-      "type": "audio",
-      "required": true
-    }
-  ],
-  "outputs": [],
-  "labelTemplate": "DAC ${param.dacNumber == 0 ? 'L' : 'R'}",
-  "parameters": [
-    {
-      "id": "dacNumber",
-      "name": "DAC Number",
-      "type": "select",
-      "default": 0,
-      "options": [
-        {
-          "label": "DACL",
-          "value": 0
-        },
-        {
-          "label": "DACR",
-          "value": 1
-        }
-      ]
-    },
-    {
-      "id": "gain",
-      "name": "Gain",
-      "type": "number",
-      "default": 1,
-      "min": -2,
-      "max": 1.9999,
-      "step": 0.01
-    }
-  ]
-}
----
-@section output
-
-; DAC Output
-rdax ${input.in}, 1.0
-
-@if gain != 1.0
-sof ${param.gain}, 0.0
-@endif
-
-@if dacNumber == 0
-wrax DACL, 0
-@else
-wrax DACR, 0
-@endif
+---
+{
+  "type": "output.dac",
+  "name": "DAC Output",
+  "category": "Input/Output",
+  "description": "Writes audio to an analog output (DAC) with adjustable gain.",
+  "color": "#F44336",
+  "width": 150,
+  "inputs": [
+    {
+      "id": "in",
+      "name": "Audio",
+      "type": "audio",
+      "required": true
+    }
+  ],
+  "outputs": [],
+  "labelTemplate": "DAC ${param.dacNumber == 0 ? 'L' : 'R'}",
+  "parameters": [
+    {
+      "id": "dacNumber",
+      "name": "DAC Number",
+      "type": "select",
+      "default": 0,
+      "options": [
+        {
+          "label": "DACL",
+          "value": 0
+        },
+        {
+          "label": "DACR",
+          "value": 1
+        }
+      ]
+    },
+    {
+      "id": "gain",
+      "name": "Gain",
+      "type": "number",
+      "default": 1,
+      "min": -2,
+      "max": 1.9999,
+      "step": 0.01
+    }
+  ]
+}
+---
+@section output
+
+; DAC Output
+rdax ${input.in}, 1.0
+
+@if gain != 1.0
+sof ${param.gain}, 0.0
+@endif
+
+@if dacNumber == 0
+wrax DACL, 0
+@else
+wrax DACR, 0
+@endif

package/blocks/other/stickynote.atl

@@ -1,24 +1,24 @@
----
-{
-  "type": "other.stickynote",
-  "name": "Sticky Note",
-  "category": "Other",
-  "description": "Add documentation comments to your diagram",
-  "color": "#FFEB3B",
-  "width": 120,
-  "inputs": [],
-  "outputs": [],
-  "parameters": [
-    {
-      "id": "text",
-      "name": "Note",
-      "type": "string",
-      "default": "Add your notes here...",
-      "multiline": true,
-      "description": "Text content for the sticky note. Will be added as comments in the assembly output."
-    }
-  ],
-  "labelTemplate": "${param.text}"
-}
----
-@comment ${param.text}
+---
+{
+  "type": "other.stickynote",
+  "name": "Sticky Note",
+  "category": "Other",
+  "description": "Add documentation comments to your diagram",
+  "color": "#FFEB3B",
+  "width": 120,
+  "inputs": [],
+  "outputs": [],
+  "parameters": [
+    {
+      "id": "text",
+      "name": "Note",
+      "type": "string",
+      "default": "Add your notes here...",
+      "multiline": true,
+      "description": "Text content for the sticky note. Will be added as comments in the assembly output."
+    }
+  ],
+  "labelTemplate": "${param.text}"
+}
+---
+@comment ${param.text}