@atomiqlabs/base 10.0.0-dev.5 → 10.0.0-dev.7

package/src/swaps/SwapContract.ts

@@ -1,556 +1,557 @@
-import {SwapData} from "./SwapData";
-import {BtcStoredHeader} from "../btcrelay/types/BtcStoredHeader";
-import {ChainSwapType} from "./ChainSwapType";
-import {RelaySynchronizer} from "../btcrelay/synchronizer/RelaySynchronizer";
-import {Buffer} from "buffer";
-import {AbstractSigner, TransactionConfirmationOptions} from "../chains/ChainInterface";
-import {SwapCommitState} from "./SwapCommitState";
-
-export type IntermediaryReputationType = {
-    [key in ChainSwapType]: {
-        successVolume: bigint,
-        successCount: bigint,
-        failVolume: bigint,
-        failCount: bigint,
-        coopCloseVolume: bigint,
-        coopCloseCount: bigint
-    }
-};
-
-export type SignatureData = {
-    prefix: string,
-    timeout: string,
-    signature: string
-};
-
-export type BitcoinTransactionData = {
-    blockhash: string,
-    confirmations: number,
-    txid: string,
-    hex: string,
-    height: number
-};
-
-export interface SwapContract<
-    T extends SwapData = SwapData,
-    TX = any,
-    PreFetchData = any,
-    PreFetchVerification = any,
-    Signer extends AbstractSigner = AbstractSigner,
-    ChainId extends string = string
-> {
-
-    readonly chainId: ChainId;
-    readonly claimWithSecretTimeout: number;
-    readonly claimWithTxDataTimeout: number;
-    readonly refundTimeout: number;
-
-    /**
-     * Initializes the swap contract
-     */
-    start(): Promise<void>;
-
-    /**
-     * Signs & sends transactions for initializing a non-payIn swap (BTC -> SC)
-     *
-     * @param signer Signer to use for the transaction (must match claimer in swap data)
-     * @param swapData Swap to init
-     * @param signature Signature data from the offerer
-     * @param skipChecks Whether to skip verification of the signature & checking if the swap is already committed
-     * @param txOptions Transaction options
-     */
-    init(signer: Signer, swapData: T, signature: SignatureData, skipChecks?: boolean, txOptions?: TransactionConfirmationOptions): Promise<string>;
-
-    /**
-     * Returns the unsigned transactions required for initializing a non-payIn swap (BTC -> SC)
-     *
-     * @param sender Transaction sender address, must be either offerer or claimer
-     * @param swapData Swap to init
-     * @param signature Signature data from the offerer
-     * @param skipChecks Whether to skip verification of the signature & checking if the swap is already committed
-     * @param feeRate Fee rate to use for the transaction
-     */
-    txsInit(sender: string, swapData: T, signature: SignatureData, skipChecks?: boolean, feeRate?: string): Promise<TX[]>;
-
-    /**
-     * Signs & sends transactions required for claiming an HTLC swap
-     *
-     * @param signer Signer for which the transaction should be created (doesn't need to match the claimer)
-     * @param swapData Swap to claim
-     * @param secret Secret pre-image that hashes to the swap hash
-     * @param checkExpiry Whether to check expiration of the swap before executing transactions
-     * @param initAta Whether to initialize a token account if it doesn't exist (applies to e.g. Solana, with token specific ATAs)
-     * @param txOptions Transaction options
-     */
-    claimWithSecret(signer: Signer, swapData: T, secret: string, checkExpiry?: boolean, initAta?: boolean, txOptions?: TransactionConfirmationOptions): Promise<string>;
-
-    /**
-     * Returns the unsigned transactions required for claiming an HTLC swap
-     *
-     * @param signer Signer for which the transaction should be created (doesn't need to match the claimer)
-     * @param swapData Swap to claim
-     * @param secret Secret pre-image that hashes to the swap hash
-     * @param checkExpiry Whether to check expiration of the swap before returning the transactions
-     * @param initAta Whether to initialize a token account if it doesn't exist (applies to e.g. Solana, with token specific ATAs)
-     * @param feeRate Fee rate to use for the transactions
-     * @param skipAtaCheck Whether to skip checking if token account exists
-     */
-    txsClaimWithSecret(signer: string | Signer, swapData: T, secret: string, checkExpiry?: boolean, initAta?: boolean, feeRate?: string, skipAtaCheck?: boolean): Promise<TX[]>;
-
-    /**
-     * Signs & sends transactions required for claiming an on-chain PTLC (proof-time locked contract) swap
-     *
-     * @param signer Signer for which the transaction should be created (doesn't need to match the claimer)
-     * @param swapData Swap to claim
-     * @param tx Bitcoin transaction containing the required output
-     * @param requiredConfirmations Required confirmations for the escrow to be claimed
-     * @param vout Bitcoin tx's output index of the required output
-     * @param storedHeader Optional already retrieved stored header to use for proving
-     * @param synchronizer Optiona synchronizer to be used if BTC relay contract is not synced up to the required blockheight
-     * @param initAta Whether to initialize a token account if it doesn't exist (applies to e.g. Solana, with token specific ATAs)
-     * @param txOptions Transaction options
-     */
-    claimWithTxData(
-        signer: Signer,
-        swapData: T,
-        tx: BitcoinTransactionData,
-        requiredConfirmations: number,
-        vout: number,
-        storedHeader?: BtcStoredHeader<any>,
-        synchronizer?: RelaySynchronizer<any, TX, any>,
-        initAta?: boolean,
-        txOptions?: TransactionConfirmationOptions
-    ): Promise<string>;
-
-    /**
-     * Returns the unsigned transactions required for claiming an on-chain PTLC (proof-time locked contract) swap
-     *
-     * @param signer Signer for which the transaction should be created (doesn't need to match the claimer)
-     * @param swapData Swap to claim
-     * @param tx Bitcoin transaction containing the required output
-     * @param requiredConfirmations Required confirmations for the escrow to be claimed
-     * @param vout Bitcoin tx's output index of the required output
-     * @param storedHeader Optional already retrieved stored header to use for proving
-     * @param synchronizer Optiona synchronizer to be used if BTC relay contract is not synced up to the required blockheight
-     * @param initAta Whether to initialize a token account if it doesn't exist (applies to e.g. Solana, with token specific ATAs)
-     * @param feeRate Fee rate to use for the transactions
-     */
-    txsClaimWithTxData(
-        signer: string | Signer,
-        swapData: T,
-        tx: BitcoinTransactionData,
-        requiredConfirmations: number,
-        vout: number,
-        storedHeader?: BtcStoredHeader<any>,
-        synchronizer?: RelaySynchronizer<any, TX, any>,
-        initAta?: boolean,
-        feeRate?: string
-    ): Promise<TX[]>;
-
-    /**
-     * Signs & sends transactions for refunding a timed out swap
-     *
-     * @param signer Signer to use for the transaction (must match offerer in swap data)
-     * @param swapData Swap to refund
-     * @param check Whether to check if the swap contract still exists on-chain
-     * @param initAta Whether to initialize a token account if it doesn't exist (applies to e.g. Solana, with token specific ATAs)
-     * @param txOptions Transaction options
-     */
-    refund(signer: Signer, swapData: T, check?: boolean, initAta?: boolean, txOptions?: TransactionConfirmationOptions): Promise<string>;
-
-    /**
-     * Returns the transactions for refunding a timed out swap
-     *
-     * @param signer Signer of the refund transaction
-     * @param swapData Swap to refund
-     * @param check Whether to check if the swap contract still exists on-chain
-     * @param initAta Whether to initialize a token account if it doesn't exist (applies to e.g. Solana, with token specific ATAs)
-     * @param feeRate Fee rate to use for the transactions
-     */
-    txsRefund(signer: string, swapData: T, check?: boolean, initAta?: boolean, feeRate?: string): Promise<TX[]>;
-
-    /**
-     * Signs & sends transactions for refunding a swap with a valid refund signature from the claimer
-     *
-     * @param signer Signer to use for the transaction (must match offerer in swap data)
-     * @param swapData Swap to refund
-     * @param signature Refund signature received from the claimer
-     * @param check Whether to check if the swap contract still exists on-chain
-     * @param initAta Whether to initialize a token account if it doesn't exist (applies to e.g. Solana, with token specific ATAs)
-     * @param txOptions Transaction options
-     */
-    refundWithAuthorization(signer: Signer, swapData: T, signature: SignatureData, check?: boolean, initAta?: boolean, txOptions?: TransactionConfirmationOptions): Promise<string>;
-
-    /**
-     * Returns the transactions for refunding a swap with a valid refund signature from the claimer
-     *
-     * @param signer Signer of the refund transaction
-     * @param swapData Swap to refund
-     * @param signature Refund signature received from the claimer
-     * @param check Whether to check if the swap contract still exists on-chain
-     * @param initAta Whether to initialize a token account if it doesn't exist (applies to e.g. Solana, with token specific ATAs)
-     * @param feeRate Fee rate to use for the transactions
-     */
-    txsRefundWithAuthorization(signer: string, swapData: T, signature: SignatureData, check?: boolean, initAta?: boolean, feeRate?: string): Promise<TX[]>;
-
-    /**
-     * Signs & sends transactions for initializing and instantly (upon init confirmation) claiming the HTLC, used for BTC-LN -> SC swaps
-     *
-     * @param signer Signer to use for the transaction (must match claimer in swap data)
-     * @param swapData Swap to process
-     * @param signature Signature data from the offerer
-     * @param secret Secret pre-image that hashes to the swap hash
-     * @param skipChecks Whether to skip verification of the signature & checking if the swap is already committed
-     * @param txOptions Transaction options
-     */
-    initAndClaimWithSecret?(signer: Signer, swapData: T, signature: SignatureData, secret: string, skipChecks?: boolean, txOptions?: TransactionConfirmationOptions): Promise<string[]>;
-
-    /**
-     * Checks whether a swap is already expired, swap expires a bit sooner for the claimer & a bit later for offerer, this
-     *  is used to account for possible on-chain time skew
-     *
-     * @param signer Signer to use for checking the expiry
-     * @param swapData Swap to check
-     */
-    isExpired(signer: string, swapData: T): Promise<boolean>;
-
-    /**
-     * Checks whether a swap is claimable for the signer, i.e. it is not expired yet and is committed on-chain
-     *
-     * @param signer
-     * @param swapData
-     */
-    isClaimable(signer: string, swapData: T): Promise<boolean>;
-
-    /**
-     * Checks whether a given swap is committed on chain (initialized)
-     *
-     * @param swapData
-     */
-    isCommited(swapData: T): Promise<boolean>;
-
-    /**
-     * Returns the full status of the swap, expiry is handled by the isExpired function so also requires a signer/sender
-     *
-     * @param signer
-     * @param swapData
-     */
-    getCommitStatus(signer: string, swapData: T): Promise<SwapCommitState>;
-
-    /**
-     * Checks whether a given swap is refundable by us, i.e. it is already expired, we are offerer & swap is committed on-chain
-     *
-     * @param signer
-     * @param swapData
-     */
-    isRequestRefundable(signer: string, swapData: T): Promise<boolean>;
-
-    /**
-     * Pre-fetches data required for creating init signature
-     */
-    preFetchBlockDataForSignatures?(): Promise<PreFetchData>;
-
-    /**
-     * Pre-fetches data required for init signature verification
-     * @param data
-     */
-    preFetchForInitSignatureVerification?(data: PreFetchData): Promise<PreFetchVerification>;
-
-    /**
-     * Generates the initialization signature
-     *
-     * @param signer Signer to use for signing the message
-     * @param swapData Swap to sign
-     * @param authorizationTimeout Timeout of the authorization
-     * @param preFetchedBlockData Optional pre-fetched data required for creating the signature
-     * @param feeRate Optional fee rate to use for the authorization
-     */
-    getInitSignature(signer: Signer, swapData: T, authorizationTimeout: number, preFetchedBlockData?: PreFetchData, feeRate?: string): Promise<SignatureData>;
-
-    /**
-     * Checks whether a signature is a valid initialization signature for a given swap
-     *
-     * @param sender Address of the sender of the transaction (must be either offerer or claimer)
-     * @param swapData Swap to initialize
-     * @param signature Signature data
-     * @param feeRate Fee rate used for the authorization
-     * @param preFetchedVerificationData Optional pre-fetched data required for signature validation
-     * @returns {Buffer | null} The message being signed if valid or null if invalid signature
-     */
-    isValidInitAuthorization(sender: string, swapData: T, signature: SignatureData, feeRate?: string, preFetchedVerificationData?: PreFetchVerification): Promise<Buffer | null>;
-
-    /**
-     * Returns the expiry timestamp (UNIX milliseconds) of the authorization
-     *
-     * @param swapData Swap
-     * @param signature Signature data
-     * @param preFetchedVerificationData Optional pre-fetched data required for signature validation
-     */
-    getInitAuthorizationExpiry(swapData: T, signature: SignatureData, preFetchedVerificationData?: PreFetchVerification): Promise<number>;
-
-    /**
-     * Checks whether a given init signature is already expired
-     *
-     * @param swapData Swap
-     * @param signature Signature data
-     */
-    isInitAuthorizationExpired(swapData: T, signature: SignatureData): Promise<boolean>;
-
-    /**
-     * Generates the refund signature for a given swap allowing the offerer to refund before expiration
-     *
-     * @param signer Signer to use for signing the message (must be the same as offerer in swap data)
-     * @param swapData Swap to refund
-     * @param authorizationTimeout Timeout of the provided refund authorization
-     */
-    getRefundSignature(signer: Signer, swapData: T, authorizationTimeout: number): Promise<SignatureData>;
-
-    /**
-     * Checks whether a given refund signature is valid
-     *
-     * @param swapData Swap to refund
-     * @param signature Signature received from the claimer
-     */
-    isValidRefundAuthorization(swapData: T, signature: SignatureData): Promise<Buffer | null>;
-
-    /**
-     * Signs the given data with the provided signer
-     *
-     * @param signer Signer to sign the message
-     * @param data Data to sign
-     */
-    getDataSignature(signer: Signer, data: Buffer): Promise<string>;
-
-    /**
-     * Checks whether a provided data is signature is valid
-     *
-     * @param data Data to sign
-     * @param signature Signature
-     * @param publicKey Public key of the signer
-     */
-    isValidDataSignature(data: Buffer, signature: string, publicKey: string): Promise<boolean>;
-
-    /**
-     * Returns the token balance of a given signer's address
-     *
-     * @param signer Address to check the balance of
-     * @param token Token
-     * @param inContract Whether we are checking the liquidity deposited into the LP vault or just on-chain balance
-     */
-    getBalance(signer: string, token: string, inContract: boolean): Promise<bigint>;
-
-    /**
-     * Create a swap data for this given chain
-     *
-     * @param type Type of the swap
-     * @param offerer Offerer address
-     * @param claimer Claimer addres
-     * @param token Token to use for the swap
-     * @param amount Amount of tokens for the swap
-     * @param paymentHash Payment hash identifying the swap
-     * @param sequence Swap sequence uniquelly defining this swap
-     * @param expiry Expiration of the swap
-     * @param payIn Whether the swap is payIn (offerer paying to the contract, or not payIn offerer using funds in his LP vault)
-     * @param payOut Whether the swap is payOut (claimer getting the funds to his on-chain address, or no payOut claimer
-     *  getting his funds into his LP vault)
-     * @param securityDeposit Security deposit for the swap paid by the claimer (options premium)
-     * @param claimerBounty Bounty for the claimer of the swap (used for watchtowers)
-     * @param depositToken Token to be used for security deposit and claimer bounty
-     */
-    createSwapData(
-        type: ChainSwapType,
-        offerer: string,
-        claimer: string,
-        token: string,
-        amount: bigint,
-        paymentHash: string,
-        sequence: bigint,
-        expiry: bigint,
-        payIn: boolean,
-        payOut: boolean,
-        securityDeposit: bigint,
-        claimerBounty: bigint,
-        depositToken?: string
-    ): Promise<T>;
-
-    /**
-     * Returns intermediary's reputation for a given token swaps
-     *
-     * @param address
-     * @param token
-     */
-    getIntermediaryReputation(address: string, token: string): Promise<IntermediaryReputationType>;
-
-    /**
-     * Returns the fee in native token base units to commit (initiate) the swap
-     *
-     * @param signer
-     * @param swapData Swap to initiate
-     * @param feeRate Optional fee rate (fetched on-demand if not provided)
-     */
-    getCommitFee(signer: string, swapData: T, feeRate?: string): Promise<bigint>;
-
-    /**
-     * Returns raw fee (not including any account deposits we might need) for initiating the swap
-     *
-     * @param signer
-     * @param swapData Swap to initiate
-     * @param feeRate Optional fee rate (fetched on-demand if not provided)
-     */
-    getRawCommitFee?(signer: string, swapData: T, feeRate?: string): Promise<bigint>;
-
-    /**
-     * Returns the fee in native token base units to claim the swap
-     *
-     * @param signer Signer claiming the swap
-     * @param swapData Swap to claim
-     * @param feeRate Optional fee rate (fetched on-demand if not provided)
-     */
-    getClaimFee(signer: string, swapData: T, feeRate?: string): Promise<bigint>;
-
-    /**
-     * Returns raw fee (not including any refunds we might get that would make the getClaimFee negative) for claiming the swap
-     *
-     * @param signer Signer claiming the swap
-     * @param swapData Swap to claim
-     * @param feeRate Optional fee rate (fetched on-demand if not provided)
-     */
-    getRawClaimFee?(signer: string, swapData: T, feeRate?: string): Promise<bigint>;
-
-    /**
-     * Returns the fee in native token base units to refund the swap
-     *
-     * @param signer
-     * @param swapData Swap to refund
-     * @param feeRate Optional fee rate (fetched on-demand if not provided)
-     */
-    getRefundFee(signer: string, swapData: T, feeRate?: string): Promise<bigint>;
-
-    /**
-     * Returns raw fee (not including any refunds we might get that would make the getRefundFee negative) for claiming the swap
-     *
-     * @param signer
-     * @param swapData Swap to claim
-     * @param feeRate Optional fee rate (fetched on-demand if not provided)
-     */
-    getRawRefundFee?(signer: string, swapData: T, feeRate?: string): Promise<bigint>;
-
-    /**
-     * Returns the fee rate for committing (initializing) a payIn swap
-     *
-     * @param offerer Offerer of the swap
-     * @param claimer Claimer of the swap
-     * @param token Token to be swapped
-     * @param paymentHash Optional payment hash
-     */
-    getInitPayInFeeRate(offerer: string, claimer: string, token: string, paymentHash?: string): Promise<string>;
-
-    /**
-     * Returns the fee rate for committing (initializing) a non-payIn swap
-     *
-     * @param offerer Offerer of the swap
-     * @param claimer Claimer of the swap
-     * @param token Token to be swapped
-     * @param paymentHash Optional payment hash
-     */
-    getInitFeeRate(offerer: string, claimer: string, token: string, paymentHash?: string): Promise<string>;
-
-    /**
-     * Returns the fee rate for refunding a swap
-     *
-     * @param swapData Swap to refund
-     */
-    getRefundFeeRate(swapData: T): Promise<string>;
-
-    /**
-     * Returns the fee rate for claiming a swap as a specific signer
-     *
-     * @param signer Signer claiming the swap
-     * @param swapData Swap to claim
-     */
-    getClaimFeeRate(signer: string, swapData: T): Promise<string>;
-
-    getExtraData(outputScript: Buffer, amount: bigint, confirmations: number, nonce?: bigint): Buffer;
-
-    /**
-     * Compute the claim hash for a given transaction output, either nonced or just output locked
-     *
-     * @param outputScript Bitcoin output locking script
-     * @param amount Amount of sats in the output
-     * @param confirmations Required number of confirmations for the swap to be claimable
-     * @param nonce Nonce to be used as replay protection
-     */
-    getHashForOnchain(outputScript: Buffer, amount: bigint, confirmations: number, nonce?: bigint): Buffer;
-
-    /**
-     * Compute the claim hash for a given transaction id
-     *
-     * @param txId Bitcoin transaction ID
-     * @param confirmations Required number of confirmations for the swap to be claimable
-     */
-    getHashForTxId(txId: string, confirmations: number): Buffer;
-
-    /**
-     * Compute the claim hash for an HTLC swap with a given swap hash
-     *
-     * @param swapHash
-     */
-    getHashForHtlc(swapHash: Buffer): Buffer;
-
-    /**
-     * Withdraws funds from the trading LP vault
-     *
-     * @param signer Signer to sign the withdrawal with
-     * @param token Token to withdraw
-     * @param amount Amount of the token to withdraw
-     * @param txOptions Transaction options
-     */
-    withdraw(signer: Signer, token: string, amount: bigint, txOptions?: TransactionConfirmationOptions): Promise<string>;
-
-    /**
-     * Returns transactions required for signer to withdraw funds from the trading LP vault
-     *
-     * @param signer Owner of the funds
-     * @param token Token to withdraw
-     * @param amount Amount of the token to withdraw
-     * @param feeRate Optional fee rate to use for the transaction (fetched on-demand if not provided)
-     */
-    txsWithdraw(signer: string, token: string, amount: bigint, feeRate?: string): Promise<TX[]>;
-
-    /**
-     * Deposits funds to the trading LP vault
-     *
-     * @param signer Signer to sign the deposit with
-     * @param token Token to deposit
-     * @param amount Amount of the token to deposit
-     * @param txOptions Transaction options
-     */
-    deposit(signer: Signer, token: string, amount: bigint, txOptions?: TransactionConfirmationOptions): Promise<string>;
-
-    /**
-     * Returns transactions required for signer to deposit funds to the trading LP vault
-     *
-     * @param signer Owner of the funds
-     * @param token Token to deposit
-     * @param amount Amount of the token to deposit
-     * @param feeRate Optional fee rate to use for the transaction (fetched on-demand if not provided)
-     */
-    txsDeposit(signer: string, token: string, amount: bigint, feeRate?: string): Promise<TX[]>;
-
-    /**
-     * Returns the amount of deposits (in native token) that we can claim back (this is useful for SVM chains with the PDAs
-     *  requiring you to put some deposit in order to store data)
-     *
-     * @param signer Signer to check the claimable deposits for
-     */
-    getClaimableDeposits?(signer: string): Promise<{count: number, totalValue: bigint}>;
-
-    /**
-     * Claims the funds from claimable deposits
-     *
-     * @param signer Owner of the deposits, transaction signer
-     * @param txOptions Transaction options
-     */
-    claimDeposits?(signer: Signer, txOptions: TransactionConfirmationOptions): Promise<{txIds: string[], count: number, totalValue: bigint}>;
-
-}
+import {SwapData} from "./SwapData";
+import {BtcStoredHeader} from "../btcrelay/types/BtcStoredHeader";
+import {ChainSwapType} from "./ChainSwapType";
+import {RelaySynchronizer} from "../btcrelay/synchronizer/RelaySynchronizer";
+import {Buffer} from "buffer";
+import {AbstractSigner, TransactionConfirmationOptions} from "../chains/ChainInterface";
+import {SwapCommitState} from "./SwapCommitState";
+
+export type IntermediaryReputationType = {
+    [key in ChainSwapType]: {
+        successVolume: bigint,
+        successCount: bigint,
+        failVolume: bigint,
+        failCount: bigint,
+        coopCloseVolume: bigint,
+        coopCloseCount: bigint
+    }
+};
+
+export type SignatureData = {
+    prefix: string,
+    timeout: string,
+    signature: string
+};
+
+export type BitcoinTransactionData = {
+    blockhash: string,
+    confirmations: number,
+    txid: string,
+    hex: string,
+    height: number
+};
+
+export interface SwapContract<
+    T extends SwapData = SwapData,
+    TX = any,
+    PreFetchData = any,
+    PreFetchVerification = any,
+    Signer extends AbstractSigner = AbstractSigner,
+    ChainId extends string = string
+> {
+
+    readonly chainId: ChainId;
+    readonly claimWithSecretTimeout: number;
+    readonly claimWithTxDataTimeout: number;
+    readonly refundTimeout: number;
+    readonly supportsInitWithoutClaimer?: boolean;
+
+    /**
+     * Initializes the swap contract
+     */
+    start(): Promise<void>;
+
+    /**
+     * Signs & sends transactions for initializing a non-payIn swap (BTC -> SC)
+     *
+     * @param signer Signer to use for the transaction (must match claimer in swap data)
+     * @param swapData Swap to init
+     * @param signature Signature data from the offerer
+     * @param skipChecks Whether to skip verification of the signature & checking if the swap is already committed
+     * @param txOptions Transaction options
+     */
+    init(signer: Signer, swapData: T, signature: SignatureData, skipChecks?: boolean, txOptions?: TransactionConfirmationOptions): Promise<string>;
+
+    /**
+     * Returns the unsigned transactions required for initializing a non-payIn swap (BTC -> SC)
+     *
+     * @param sender Transaction sender address, must be either offerer or claimer
+     * @param swapData Swap to init
+     * @param signature Signature data from the offerer
+     * @param skipChecks Whether to skip verification of the signature & checking if the swap is already committed
+     * @param feeRate Fee rate to use for the transaction
+     */
+    txsInit(sender: string, swapData: T, signature: SignatureData, skipChecks?: boolean, feeRate?: string): Promise<TX[]>;
+
+    /**
+     * Signs & sends transactions required for claiming an HTLC swap
+     *
+     * @param signer Signer for which the transaction should be created (doesn't need to match the claimer)
+     * @param swapData Swap to claim
+     * @param secret Secret pre-image that hashes to the swap hash
+     * @param checkExpiry Whether to check expiration of the swap before executing transactions
+     * @param initAta Whether to initialize a token account if it doesn't exist (applies to e.g. Solana, with token specific ATAs)
+     * @param txOptions Transaction options
+     */
+    claimWithSecret(signer: Signer, swapData: T, secret: string, checkExpiry?: boolean, initAta?: boolean, txOptions?: TransactionConfirmationOptions): Promise<string>;
+
+    /**
+     * Returns the unsigned transactions required for claiming an HTLC swap
+     *
+     * @param signer Signer for which the transaction should be created (doesn't need to match the claimer)
+     * @param swapData Swap to claim
+     * @param secret Secret pre-image that hashes to the swap hash
+     * @param checkExpiry Whether to check expiration of the swap before returning the transactions
+     * @param initAta Whether to initialize a token account if it doesn't exist (applies to e.g. Solana, with token specific ATAs)
+     * @param feeRate Fee rate to use for the transactions
+     * @param skipAtaCheck Whether to skip checking if token account exists
+     */
+    txsClaimWithSecret(signer: string | Signer, swapData: T, secret: string, checkExpiry?: boolean, initAta?: boolean, feeRate?: string, skipAtaCheck?: boolean): Promise<TX[]>;
+
+    /**
+     * Signs & sends transactions required for claiming an on-chain PTLC (proof-time locked contract) swap
+     *
+     * @param signer Signer for which the transaction should be created (doesn't need to match the claimer)
+     * @param swapData Swap to claim
+     * @param tx Bitcoin transaction containing the required output
+     * @param requiredConfirmations Required confirmations for the escrow to be claimed
+     * @param vout Bitcoin tx's output index of the required output
+     * @param storedHeader Optional already retrieved stored header to use for proving
+     * @param synchronizer Optiona synchronizer to be used if BTC relay contract is not synced up to the required blockheight
+     * @param initAta Whether to initialize a token account if it doesn't exist (applies to e.g. Solana, with token specific ATAs)
+     * @param txOptions Transaction options
+     */
+    claimWithTxData(
+        signer: Signer,
+        swapData: T,
+        tx: BitcoinTransactionData,
+        requiredConfirmations: number,
+        vout: number,
+        storedHeader?: BtcStoredHeader<any>,
+        synchronizer?: RelaySynchronizer<any, TX, any>,
+        initAta?: boolean,
+        txOptions?: TransactionConfirmationOptions
+    ): Promise<string>;
+
+    /**
+     * Returns the unsigned transactions required for claiming an on-chain PTLC (proof-time locked contract) swap
+     *
+     * @param signer Signer for which the transaction should be created (doesn't need to match the claimer)
+     * @param swapData Swap to claim
+     * @param tx Bitcoin transaction containing the required output
+     * @param requiredConfirmations Required confirmations for the escrow to be claimed
+     * @param vout Bitcoin tx's output index of the required output
+     * @param storedHeader Optional already retrieved stored header to use for proving
+     * @param synchronizer Optiona synchronizer to be used if BTC relay contract is not synced up to the required blockheight
+     * @param initAta Whether to initialize a token account if it doesn't exist (applies to e.g. Solana, with token specific ATAs)
+     * @param feeRate Fee rate to use for the transactions
+     */
+    txsClaimWithTxData(
+        signer: string | Signer,
+        swapData: T,
+        tx: BitcoinTransactionData,
+        requiredConfirmations: number,
+        vout: number,
+        storedHeader?: BtcStoredHeader<any>,
+        synchronizer?: RelaySynchronizer<any, TX, any>,
+        initAta?: boolean,
+        feeRate?: string
+    ): Promise<TX[]>;
+
+    /**
+     * Signs & sends transactions for refunding a timed out swap
+     *
+     * @param signer Signer to use for the transaction (must match offerer in swap data)
+     * @param swapData Swap to refund
+     * @param check Whether to check if the swap contract still exists on-chain
+     * @param initAta Whether to initialize a token account if it doesn't exist (applies to e.g. Solana, with token specific ATAs)
+     * @param txOptions Transaction options
+     */
+    refund(signer: Signer, swapData: T, check?: boolean, initAta?: boolean, txOptions?: TransactionConfirmationOptions): Promise<string>;
+
+    /**
+     * Returns the transactions for refunding a timed out swap
+     *
+     * @param signer Signer of the refund transaction
+     * @param swapData Swap to refund
+     * @param check Whether to check if the swap contract still exists on-chain
+     * @param initAta Whether to initialize a token account if it doesn't exist (applies to e.g. Solana, with token specific ATAs)
+     * @param feeRate Fee rate to use for the transactions
+     */
+    txsRefund(signer: string, swapData: T, check?: boolean, initAta?: boolean, feeRate?: string): Promise<TX[]>;
+
+    /**
+     * Signs & sends transactions for refunding a swap with a valid refund signature from the claimer
+     *
+     * @param signer Signer to use for the transaction (must match offerer in swap data)
+     * @param swapData Swap to refund
+     * @param signature Refund signature received from the claimer
+     * @param check Whether to check if the swap contract still exists on-chain
+     * @param initAta Whether to initialize a token account if it doesn't exist (applies to e.g. Solana, with token specific ATAs)
+     * @param txOptions Transaction options
+     */
+    refundWithAuthorization(signer: Signer, swapData: T, signature: SignatureData, check?: boolean, initAta?: boolean, txOptions?: TransactionConfirmationOptions): Promise<string>;
+
+    /**
+     * Returns the transactions for refunding a swap with a valid refund signature from the claimer
+     *
+     * @param signer Signer of the refund transaction
+     * @param swapData Swap to refund
+     * @param signature Refund signature received from the claimer
+     * @param check Whether to check if the swap contract still exists on-chain
+     * @param initAta Whether to initialize a token account if it doesn't exist (applies to e.g. Solana, with token specific ATAs)
+     * @param feeRate Fee rate to use for the transactions
+     */
+    txsRefundWithAuthorization(signer: string, swapData: T, signature: SignatureData, check?: boolean, initAta?: boolean, feeRate?: string): Promise<TX[]>;
+
+    /**
+     * Signs & sends transactions for initializing and instantly (upon init confirmation) claiming the HTLC, used for BTC-LN -> SC swaps
+     *
+     * @param signer Signer to use for the transaction (must match claimer in swap data)
+     * @param swapData Swap to process
+     * @param signature Signature data from the offerer
+     * @param secret Secret pre-image that hashes to the swap hash
+     * @param skipChecks Whether to skip verification of the signature & checking if the swap is already committed
+     * @param txOptions Transaction options
+     */
+    initAndClaimWithSecret?(signer: Signer, swapData: T, signature: SignatureData, secret: string, skipChecks?: boolean, txOptions?: TransactionConfirmationOptions): Promise<string[]>;
+
+    /**
+     * Checks whether a swap is already expired, swap expires a bit sooner for the claimer & a bit later for offerer, this
+     *  is used to account for possible on-chain time skew
+     *
+     * @param signer Signer to use for checking the expiry
+     * @param swapData Swap to check
+     */
+    isExpired(signer: string, swapData: T): Promise<boolean>;
+
+    /**
+     * Checks whether a swap is claimable for the signer, i.e. it is not expired yet and is committed on-chain
+     *
+     * @param signer
+     * @param swapData
+     */
+    isClaimable(signer: string, swapData: T): Promise<boolean>;
+
+    /**
+     * Checks whether a given swap is committed on chain (initialized)
+     *
+     * @param swapData
+     */
+    isCommited(swapData: T): Promise<boolean>;
+
+    /**
+     * Returns the full status of the swap, expiry is handled by the isExpired function so also requires a signer/sender
+     *
+     * @param signer
+     * @param swapData
+     */
+    getCommitStatus(signer: string, swapData: T): Promise<SwapCommitState>;
+
+    /**
+     * Checks whether a given swap is refundable by us, i.e. it is already expired, we are offerer & swap is committed on-chain
+     *
+     * @param signer
+     * @param swapData
+     */
+    isRequestRefundable(signer: string, swapData: T): Promise<boolean>;
+
+    /**
+     * Pre-fetches data required for creating init signature
+     */
+    preFetchBlockDataForSignatures?(): Promise<PreFetchData>;
+
+    /**
+     * Pre-fetches data required for init signature verification
+     * @param data
+     */
+    preFetchForInitSignatureVerification?(data: PreFetchData): Promise<PreFetchVerification>;
+
+    /**
+     * Generates the initialization signature
+     *
+     * @param signer Signer to use for signing the message
+     * @param swapData Swap to sign
+     * @param authorizationTimeout Timeout of the authorization
+     * @param preFetchedBlockData Optional pre-fetched data required for creating the signature
+     * @param feeRate Optional fee rate to use for the authorization
+     */
+    getInitSignature(signer: Signer, swapData: T, authorizationTimeout: number, preFetchedBlockData?: PreFetchData, feeRate?: string): Promise<SignatureData>;
+
+    /**
+     * Checks whether a signature is a valid initialization signature for a given swap
+     *
+     * @param sender Address of the sender of the transaction (must be either offerer or claimer)
+     * @param swapData Swap to initialize
+     * @param signature Signature data
+     * @param feeRate Fee rate used for the authorization
+     * @param preFetchedVerificationData Optional pre-fetched data required for signature validation
+     * @returns {Buffer | null} The message being signed if valid or null if invalid signature
+     */
+    isValidInitAuthorization(sender: string, swapData: T, signature: SignatureData, feeRate?: string, preFetchedVerificationData?: PreFetchVerification): Promise<Buffer | null>;
+
+    /**
+     * Returns the expiry timestamp (UNIX milliseconds) of the authorization
+     *
+     * @param swapData Swap
+     * @param signature Signature data
+     * @param preFetchedVerificationData Optional pre-fetched data required for signature validation
+     */
+    getInitAuthorizationExpiry(swapData: T, signature: SignatureData, preFetchedVerificationData?: PreFetchVerification): Promise<number>;
+
+    /**
+     * Checks whether a given init signature is already expired
+     *
+     * @param swapData Swap
+     * @param signature Signature data
+     */
+    isInitAuthorizationExpired(swapData: T, signature: SignatureData): Promise<boolean>;
+
+    /**
+     * Generates the refund signature for a given swap allowing the offerer to refund before expiration
+     *
+     * @param signer Signer to use for signing the message (must be the same as offerer in swap data)
+     * @param swapData Swap to refund
+     * @param authorizationTimeout Timeout of the provided refund authorization
+     */
+    getRefundSignature(signer: Signer, swapData: T, authorizationTimeout: number): Promise<SignatureData>;
+
+    /**
+     * Checks whether a given refund signature is valid
+     *
+     * @param swapData Swap to refund
+     * @param signature Signature received from the claimer
+     */
+    isValidRefundAuthorization(swapData: T, signature: SignatureData): Promise<Buffer | null>;
+
+    /**
+     * Signs the given data with the provided signer
+     *
+     * @param signer Signer to sign the message
+     * @param data Data to sign
+     */
+    getDataSignature(signer: Signer, data: Buffer): Promise<string>;
+
+    /**
+     * Checks whether a provided data is signature is valid
+     *
+     * @param data Data to sign
+     * @param signature Signature
+     * @param publicKey Public key of the signer
+     */
+    isValidDataSignature(data: Buffer, signature: string, publicKey: string): Promise<boolean>;
+
+    /**
+     * Returns the token balance of a given signer's address
+     *
+     * @param signer Address to check the balance of
+     * @param token Token
+     * @param inContract Whether we are checking the liquidity deposited into the LP vault or just on-chain balance
+     */
+    getBalance(signer: string, token: string, inContract: boolean): Promise<bigint>;
+
+    /**
+     * Create a swap data for this given chain
+     *
+     * @param type Type of the swap
+     * @param offerer Offerer address
+     * @param claimer Claimer addres
+     * @param token Token to use for the swap
+     * @param amount Amount of tokens for the swap
+     * @param paymentHash Payment hash identifying the swap
+     * @param sequence Swap sequence uniquelly defining this swap
+     * @param expiry Expiration of the swap
+     * @param payIn Whether the swap is payIn (offerer paying to the contract, or not payIn offerer using funds in his LP vault)
+     * @param payOut Whether the swap is payOut (claimer getting the funds to his on-chain address, or no payOut claimer
+     *  getting his funds into his LP vault)
+     * @param securityDeposit Security deposit for the swap paid by the claimer (options premium)
+     * @param claimerBounty Bounty for the claimer of the swap (used for watchtowers)
+     * @param depositToken Token to be used for security deposit and claimer bounty
+     */
+    createSwapData(
+        type: ChainSwapType,
+        offerer: string,
+        claimer: string,
+        token: string,
+        amount: bigint,
+        paymentHash: string,
+        sequence: bigint,
+        expiry: bigint,
+        payIn: boolean,
+        payOut: boolean,
+        securityDeposit: bigint,
+        claimerBounty: bigint,
+        depositToken?: string
+    ): Promise<T>;
+
+    /**
+     * Returns intermediary's reputation for a given token swaps
+     *
+     * @param address
+     * @param token
+     */
+    getIntermediaryReputation(address: string, token: string): Promise<IntermediaryReputationType>;
+
+    /**
+     * Returns the fee in native token base units to commit (initiate) the swap
+     *
+     * @param signer
+     * @param swapData Swap to initiate
+     * @param feeRate Optional fee rate (fetched on-demand if not provided)
+     */
+    getCommitFee(signer: string, swapData: T, feeRate?: string): Promise<bigint>;
+
+    /**
+     * Returns raw fee (not including any account deposits we might need) for initiating the swap
+     *
+     * @param signer
+     * @param swapData Swap to initiate
+     * @param feeRate Optional fee rate (fetched on-demand if not provided)
+     */
+    getRawCommitFee?(signer: string, swapData: T, feeRate?: string): Promise<bigint>;
+
+    /**
+     * Returns the fee in native token base units to claim the swap
+     *
+     * @param signer Signer claiming the swap
+     * @param swapData Swap to claim
+     * @param feeRate Optional fee rate (fetched on-demand if not provided)
+     */
+    getClaimFee(signer: string, swapData: T, feeRate?: string): Promise<bigint>;
+
+    /**
+     * Returns raw fee (not including any refunds we might get that would make the getClaimFee negative) for claiming the swap
+     *
+     * @param signer Signer claiming the swap
+     * @param swapData Swap to claim
+     * @param feeRate Optional fee rate (fetched on-demand if not provided)
+     */
+    getRawClaimFee?(signer: string, swapData: T, feeRate?: string): Promise<bigint>;
+
+    /**
+     * Returns the fee in native token base units to refund the swap
+     *
+     * @param signer
+     * @param swapData Swap to refund
+     * @param feeRate Optional fee rate (fetched on-demand if not provided)
+     */
+    getRefundFee(signer: string, swapData: T, feeRate?: string): Promise<bigint>;
+
+    /**
+     * Returns raw fee (not including any refunds we might get that would make the getRefundFee negative) for claiming the swap
+     *
+     * @param signer
+     * @param swapData Swap to claim
+     * @param feeRate Optional fee rate (fetched on-demand if not provided)
+     */
+    getRawRefundFee?(signer: string, swapData: T, feeRate?: string): Promise<bigint>;
+
+    /**
+     * Returns the fee rate for committing (initializing) a payIn swap
+     *
+     * @param offerer Offerer of the swap
+     * @param claimer Claimer of the swap
+     * @param token Token to be swapped
+     * @param paymentHash Optional payment hash
+     */
+    getInitPayInFeeRate(offerer: string, claimer: string, token: string, paymentHash?: string): Promise<string>;
+
+    /**
+     * Returns the fee rate for committing (initializing) a non-payIn swap
+     *
+     * @param offerer Offerer of the swap
+     * @param claimer Claimer of the swap
+     * @param token Token to be swapped
+     * @param paymentHash Optional payment hash
+     */
+    getInitFeeRate(offerer: string, claimer: string, token: string, paymentHash?: string): Promise<string>;
+
+    /**
+     * Returns the fee rate for refunding a swap
+     *
+     * @param swapData Swap to refund
+     */
+    getRefundFeeRate(swapData: T): Promise<string>;
+
+    /**
+     * Returns the fee rate for claiming a swap as a specific signer
+     *
+     * @param signer Signer claiming the swap
+     * @param swapData Swap to claim
+     */
+    getClaimFeeRate(signer: string, swapData: T): Promise<string>;
+
+    getExtraData(outputScript: Buffer, amount: bigint, confirmations: number, nonce?: bigint): Buffer;
+
+    /**
+     * Compute the claim hash for a given transaction output, either nonced or just output locked
+     *
+     * @param outputScript Bitcoin output locking script
+     * @param amount Amount of sats in the output
+     * @param confirmations Required number of confirmations for the swap to be claimable
+     * @param nonce Nonce to be used as replay protection
+     */
+    getHashForOnchain(outputScript: Buffer, amount: bigint, confirmations: number, nonce?: bigint): Buffer;
+
+    /**
+     * Compute the claim hash for a given transaction id
+     *
+     * @param txId Bitcoin transaction ID
+     * @param confirmations Required number of confirmations for the swap to be claimable
+     */
+    getHashForTxId(txId: string, confirmations: number): Buffer;
+
+    /**
+     * Compute the claim hash for an HTLC swap with a given swap hash
+     *
+     * @param swapHash
+     */
+    getHashForHtlc(swapHash: Buffer): Buffer;
+
+    /**
+     * Withdraws funds from the trading LP vault
+     *
+     * @param signer Signer to sign the withdrawal with
+     * @param token Token to withdraw
+     * @param amount Amount of the token to withdraw
+     * @param txOptions Transaction options
+     */
+    withdraw(signer: Signer, token: string, amount: bigint, txOptions?: TransactionConfirmationOptions): Promise<string>;
+
+    /**
+     * Returns transactions required for signer to withdraw funds from the trading LP vault
+     *
+     * @param signer Owner of the funds
+     * @param token Token to withdraw
+     * @param amount Amount of the token to withdraw
+     * @param feeRate Optional fee rate to use for the transaction (fetched on-demand if not provided)
+     */
+    txsWithdraw(signer: string, token: string, amount: bigint, feeRate?: string): Promise<TX[]>;
+
+    /**
+     * Deposits funds to the trading LP vault
+     *
+     * @param signer Signer to sign the deposit with
+     * @param token Token to deposit
+     * @param amount Amount of the token to deposit
+     * @param txOptions Transaction options
+     */
+    deposit(signer: Signer, token: string, amount: bigint, txOptions?: TransactionConfirmationOptions): Promise<string>;
+
+    /**
+     * Returns transactions required for signer to deposit funds to the trading LP vault
+     *
+     * @param signer Owner of the funds
+     * @param token Token to deposit
+     * @param amount Amount of the token to deposit
+     * @param feeRate Optional fee rate to use for the transaction (fetched on-demand if not provided)
+     */
+    txsDeposit(signer: string, token: string, amount: bigint, feeRate?: string): Promise<TX[]>;
+
+    /**
+     * Returns the amount of deposits (in native token) that we can claim back (this is useful for SVM chains with the PDAs
+     *  requiring you to put some deposit in order to store data)
+     *
+     * @param signer Signer to check the claimable deposits for
+     */
+    getClaimableDeposits?(signer: string): Promise<{count: number, totalValue: bigint}>;
+
+    /**
+     * Claims the funds from claimable deposits
+     *
+     * @param signer Owner of the deposits, transaction signer
+     * @param txOptions Transaction options
+     */
+    claimDeposits?(signer: Signer, txOptions: TransactionConfirmationOptions): Promise<{txIds: string[], count: number, totalValue: bigint}>;
+
+}