@ardennguyen/zalo-agent-cli 1.0.7 → 2.1.0

package/node_modules/pako/lib/zlib/inflate.js

@@ -0,0 +1,1575 @@
+'use strict';
+
+// (C) 1995-2013 Jean-loup Gailly and Mark Adler
+// (C) 2014-2017 Vitaly Puzrin and Andrey Tupitsin
+//
+// This software is provided 'as-is', without any express or implied
+// warranty. In no event will the authors be held liable for any damages
+// arising from the use of this software.
+//
+// Permission is granted to anyone to use this software for any purpose,
+// including commercial applications, and to alter it and redistribute it
+// freely, subject to the following restrictions:
+//
+// 1. The origin of this software must not be misrepresented; you must not
+//   claim that you wrote the original software. If you use this software
+//   in a product, an acknowledgment in the product documentation would be
+//   appreciated but is not required.
+// 2. Altered source versions must be plainly marked as such, and must not be
+//   misrepresented as being the original software.
+// 3. This notice may not be removed or altered from any source distribution.
+
+const adler32       = require('./adler32');
+const crc32         = require('./crc32');
+const inflate_fast  = require('./inffast');
+const inflate_table = require('./inftrees');
+
+const CODES = 0;
+const LENS = 1;
+const DISTS = 2;
+
+/* Public constants ==========================================================*/
+/* ===========================================================================*/
+
+const {
+  Z_FINISH, Z_BLOCK, Z_TREES,
+  Z_OK, Z_STREAM_END, Z_NEED_DICT, Z_STREAM_ERROR, Z_DATA_ERROR, Z_MEM_ERROR, Z_BUF_ERROR,
+  Z_DEFLATED
+} = require('./constants');
+
+
+/* STATES ====================================================================*/
+/* ===========================================================================*/
+
+
+const    HEAD = 16180;       /* i: waiting for magic header */
+const    FLAGS = 16181;      /* i: waiting for method and flags (gzip) */
+const    TIME = 16182;       /* i: waiting for modification time (gzip) */
+const    OS = 16183;         /* i: waiting for extra flags and operating system (gzip) */
+const    EXLEN = 16184;      /* i: waiting for extra length (gzip) */
+const    EXTRA = 16185;      /* i: waiting for extra bytes (gzip) */
+const    NAME = 16186;       /* i: waiting for end of file name (gzip) */
+const    COMMENT = 16187;    /* i: waiting for end of comment (gzip) */
+const    HCRC = 16188;       /* i: waiting for header crc (gzip) */
+const    DICTID = 16189;    /* i: waiting for dictionary check value */
+const    DICT = 16190;      /* waiting for inflateSetDictionary() call */
+const        TYPE = 16191;      /* i: waiting for type bits, including last-flag bit */
+const        TYPEDO = 16192;    /* i: same, but skip check to exit inflate on new block */
+const        STORED = 16193;    /* i: waiting for stored size (length and complement) */
+const        COPY_ = 16194;     /* i/o: same as COPY below, but only first time in */
+const        COPY = 16195;      /* i/o: waiting for input or output to copy stored block */
+const        TABLE = 16196;     /* i: waiting for dynamic block table lengths */
+const        LENLENS = 16197;   /* i: waiting for code length code lengths */
+const        CODELENS = 16198;  /* i: waiting for length/lit and distance code lengths */
+const            LEN_ = 16199;      /* i: same as LEN below, but only first time in */
+const            LEN = 16200;       /* i: waiting for length/lit/eob code */
+const            LENEXT = 16201;    /* i: waiting for length extra bits */
+const            DIST = 16202;      /* i: waiting for distance code */
+const            DISTEXT = 16203;   /* i: waiting for distance extra bits */
+const            MATCH = 16204;     /* o: waiting for output space to copy string */
+const            LIT = 16205;       /* o: waiting for output space to write literal */
+const    CHECK = 16206;     /* i: waiting for 32-bit check value */
+const    LENGTH = 16207;    /* i: waiting for 32-bit length (gzip) */
+const    DONE = 16208;      /* finished check, done -- remain here until reset */
+const    BAD = 16209;       /* got a data error -- remain here until reset */
+const    MEM = 16210;       /* got an inflate() memory error -- remain here until reset */
+const    SYNC = 16211;      /* looking for synchronization bytes to restart inflate() */
+
+/* ===========================================================================*/
+
+
+
+const ENOUGH_LENS = 852;
+const ENOUGH_DISTS = 592;
+//const ENOUGH =  (ENOUGH_LENS+ENOUGH_DISTS);
+
+const MAX_WBITS = 15;
+/* 32K LZ77 window */
+const DEF_WBITS = MAX_WBITS;
+
+
+const zswap32 = (q) => {
+
+  return  (((q >>> 24) & 0xff) +
+          ((q >>> 8) & 0xff00) +
+          ((q & 0xff00) << 8) +
+          ((q & 0xff) << 24));
+};
+
+
+function InflateState() {
+  this.strm = null;           /* pointer back to this zlib stream */
+  this.mode = 0;              /* current inflate mode */
+  this.last = false;          /* true if processing last block */
+  this.wrap = 0;              /* bit 0 true for zlib, bit 1 true for gzip,
+                                 bit 2 true to validate check value */
+  this.havedict = false;      /* true if dictionary provided */
+  this.flags = 0;             /* gzip header method and flags (0 if zlib), or
+                                 -1 if raw or no header yet */
+  this.dmax = 0;              /* zlib header max distance (INFLATE_STRICT) */
+  this.check = 0;             /* protected copy of check value */
+  this.total = 0;             /* protected copy of output count */
+  // TODO: may be {}
+  this.head = null;           /* where to save gzip header information */
+
+  /* sliding window */
+  this.wbits = 0;             /* log base 2 of requested window size */
+  this.wsize = 0;             /* window size or zero if not using window */
+  this.whave = 0;             /* valid bytes in the window */
+  this.wnext = 0;             /* window write index */
+  this.window = null;         /* allocated sliding window, if needed */
+
+  /* bit accumulator */
+  this.hold = 0;              /* input bit accumulator */
+  this.bits = 0;              /* number of bits in "in" */
+
+  /* for string and stored block copying */
+  this.length = 0;            /* literal or length of data to copy */
+  this.offset = 0;            /* distance back to copy string from */
+
+  /* for table and code decoding */
+  this.extra = 0;             /* extra bits needed */
+
+  /* fixed and dynamic code tables */
+  this.lencode = null;          /* starting table for length/literal codes */
+  this.distcode = null;         /* starting table for distance codes */
+  this.lenbits = 0;           /* index bits for lencode */
+  this.distbits = 0;          /* index bits for distcode */
+
+  /* dynamic table building */
+  this.ncode = 0;             /* number of code length code lengths */
+  this.nlen = 0;              /* number of length code lengths */
+  this.ndist = 0;             /* number of distance code lengths */
+  this.have = 0;              /* number of code lengths in lens[] */
+  this.next = null;              /* next available space in codes[] */
+
+  this.lens = new Uint16Array(320); /* temporary storage for code lengths */
+  this.work = new Uint16Array(288); /* work area for code table building */
+
+  /*
+   because we don't have pointers in js, we use lencode and distcode directly
+   as buffers so we don't need codes
+  */
+  //this.codes = new Int32Array(ENOUGH);       /* space for code tables */
+  this.lendyn = null;              /* dynamic table for length/literal codes (JS specific) */
+  this.distdyn = null;             /* dynamic table for distance codes (JS specific) */
+  this.sane = 0;                   /* if false, allow invalid distance too far */
+  this.back = 0;                   /* bits back of last unprocessed length/lit */
+  this.was = 0;                    /* initial length of match */
+}
+
+
+const inflateStateCheck = (strm) => {
+
+  if (!strm) {
+    return 1;
+  }
+  const state = strm.state;
+  if (!state || state.strm !== strm ||
+    state.mode < HEAD || state.mode > SYNC) {
+    return 1;
+  }
+  return 0;
+};
+
+
+const inflateResetKeep = (strm) => {
+
+  if (inflateStateCheck(strm)) { return Z_STREAM_ERROR; }
+  const state = strm.state;
+  strm.total_in = strm.total_out = state.total = 0;
+  strm.msg = ''; /*Z_NULL*/
+  if (state.wrap) {       /* to support ill-conceived Java test suite */
+    strm.adler = state.wrap & 1;
+  }
+  state.mode = HEAD;
+  state.last = 0;
+  state.havedict = 0;
+  state.flags = -1;
+  state.dmax = 32768;
+  state.head = null/*Z_NULL*/;
+  state.hold = 0;
+  state.bits = 0;
+  //state.lencode = state.distcode = state.next = state.codes;
+  state.lencode = state.lendyn = new Int32Array(ENOUGH_LENS);
+  state.distcode = state.distdyn = new Int32Array(ENOUGH_DISTS);
+
+  state.sane = 1;
+  state.back = -1;
+  //Tracev((stderr, "inflate: reset\n"));
+  return Z_OK;
+};
+
+
+const inflateReset = (strm) => {
+
+  if (inflateStateCheck(strm)) { return Z_STREAM_ERROR; }
+  const state = strm.state;
+  state.wsize = 0;
+  state.whave = 0;
+  state.wnext = 0;
+  return inflateResetKeep(strm);
+
+};
+
+
+const inflateReset2 = (strm, windowBits) => {
+  let wrap;
+
+  /* get the state */
+  if (inflateStateCheck(strm)) { return Z_STREAM_ERROR; }
+  const state = strm.state;
+
+  /* extract wrap request from windowBits parameter */
+  if (windowBits < 0) {
+    wrap = 0;
+    windowBits = -windowBits;
+  }
+  else {
+    wrap = (windowBits >> 4) + 5;
+    if (windowBits < 48) {
+      windowBits &= 15;
+    }
+  }
+
+  /* set number of window bits, free window if different */
+  if (windowBits && (windowBits < 8 || windowBits > 15)) {
+    return Z_STREAM_ERROR;
+  }
+  if (state.window !== null && state.wbits !== windowBits) {
+    state.window = null;
+  }
+
+  /* update state and reset the rest of it */
+  state.wrap = wrap;
+  state.wbits = windowBits;
+  return inflateReset(strm);
+};
+
+
+const inflateInit2 = (strm, windowBits) => {
+
+  if (!strm) { return Z_STREAM_ERROR; }
+  //strm.msg = Z_NULL;                 /* in case we return an error */
+
+  const state = new InflateState();
+
+  //if (state === Z_NULL) return Z_MEM_ERROR;
+  //Tracev((stderr, "inflate: allocated\n"));
+  strm.state = state;
+  state.strm = strm;
+  state.window = null/*Z_NULL*/;
+  state.mode = HEAD;     /* to pass state test in inflateReset2() */
+  const ret = inflateReset2(strm, windowBits);
+  if (ret !== Z_OK) {
+    strm.state = null/*Z_NULL*/;
+  }
+  return ret;
+};
+
+
+const inflateInit = (strm) => {
+
+  return inflateInit2(strm, DEF_WBITS);
+};
+
+
+/*
+ Return state with length and distance decoding tables and index sizes set to
+ fixed code decoding.  Normally this returns fixed tables from inffixed.h.
+ If BUILDFIXED is defined, then instead this routine builds the tables the
+ first time it's called, and returns those tables the first time and
+ thereafter.  This reduces the size of the code by about 2K bytes, in
+ exchange for a little execution time.  However, BUILDFIXED should not be
+ used for threaded applications, since the rewriting of the tables and virgin
+ may not be thread-safe.
+ */
+let virgin = true;
+
+let lenfix, distfix; // We have no pointers in JS, so keep tables separate
+
+
+const fixedtables = (state) => {
+
+  /* build fixed huffman tables if first call (may not be thread safe) */
+  if (virgin) {
+    lenfix = new Int32Array(512);
+    distfix = new Int32Array(32);
+
+    /* literal/length table */
+    let sym = 0;
+    while (sym < 144) { state.lens[sym++] = 8; }
+    while (sym < 256) { state.lens[sym++] = 9; }
+    while (sym < 280) { state.lens[sym++] = 7; }
+    while (sym < 288) { state.lens[sym++] = 8; }
+
+    inflate_table(LENS,  state.lens, 0, 288, lenfix,   0, state.work, { bits: 9 });
+
+    /* distance table */
+    sym = 0;
+    while (sym < 32) { state.lens[sym++] = 5; }
+
+    inflate_table(DISTS, state.lens, 0, 32,   distfix, 0, state.work, { bits: 5 });
+
+    /* do this just once */
+    virgin = false;
+  }
+
+  state.lencode = lenfix;
+  state.lenbits = 9;
+  state.distcode = distfix;
+  state.distbits = 5;
+};
+
+
+/*
+ Update the window with the last wsize (normally 32K) bytes written before
+ returning.  If window does not exist yet, create it.  This is only called
+ when a window is already in use, or when output has been written during this
+ inflate call, but the end of the deflate stream has not been reached yet.
+ It is also called to create a window for dictionary data when a dictionary
+ is loaded.
+
+ Providing output buffers larger than 32K to inflate() should provide a speed
+ advantage, since only the last 32K of output is copied to the sliding window
+ upon return from inflate(), and since all distances after the first 32K of
+ output will fall in the output data, making match copies simpler and faster.
+ The advantage may be dependent on the size of the processor's data caches.
+ */
+const updatewindow = (strm, src, end, copy) => {
+
+  let dist;
+  const state = strm.state;
+
+  /* if it hasn't been done already, allocate space for the window */
+  if (state.window === null) {
+    state.window = new Uint8Array(1 << state.wbits);
+  }
+
+  /* if window not in use yet, initialize */
+  if (state.wsize === 0) {
+    state.wsize = 1 << state.wbits;
+    state.wnext = 0;
+    state.whave = 0;
+  }
+
+  /* copy state->wsize or less output bytes into the circular window */
+  if (copy >= state.wsize) {
+    state.window.set(src.subarray(end - state.wsize, end), 0);
+    state.wnext = 0;
+    state.whave = state.wsize;
+  }
+  else {
+    dist = state.wsize - state.wnext;
+    if (dist > copy) {
+      dist = copy;
+    }
+    //zmemcpy(state->window + state->wnext, end - copy, dist);
+    state.window.set(src.subarray(end - copy, end - copy + dist), state.wnext);
+    copy -= dist;
+    if (copy) {
+      //zmemcpy(state->window, end - copy, copy);
+      state.window.set(src.subarray(end - copy, end), 0);
+      state.wnext = copy;
+      state.whave = state.wsize;
+    }
+    else {
+      state.wnext += dist;
+      if (state.wnext === state.wsize) { state.wnext = 0; }
+      if (state.whave < state.wsize) { state.whave += dist; }
+    }
+  }
+  return 0;
+};
+
+
+const inflate = (strm, flush) => {
+
+  let state;
+  let input, output;          // input/output buffers
+  let next;                   /* next input INDEX */
+  let put;                    /* next output INDEX */
+  let have, left;             /* available input and output */
+  let hold;                   /* bit buffer */
+  let bits;                   /* bits in bit buffer */
+  let _in, _out;              /* save starting available input and output */
+  let copy;                   /* number of stored or match bytes to copy */
+  let from;                   /* where to copy match bytes from */
+  let from_source;
+  let here = 0;               /* current decoding table entry */
+  let here_bits, here_op, here_val; // paked "here" denormalized (JS specific)
+  //let last;                   /* parent table entry */
+  let last_bits, last_op, last_val; // paked "last" denormalized (JS specific)
+  let len;                    /* length to copy for repeats, bits to drop */
+  let ret;                    /* return code */
+  const hbuf = new Uint8Array(4);    /* buffer for gzip header crc calculation */
+  let opts;
+
+  let n; // temporary variable for NEED_BITS
+
+  const order = /* permutation of code lengths */
+    new Uint8Array([ 16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15 ]);
+
+
+  if (inflateStateCheck(strm) || !strm.output ||
+      (!strm.input && strm.avail_in !== 0)) {
+    return Z_STREAM_ERROR;
+  }
+
+  state = strm.state;
+  if (state.mode === TYPE) { state.mode = TYPEDO; }    /* skip check */
+
+
+  //--- LOAD() ---
+  put = strm.next_out;
+  output = strm.output;
+  left = strm.avail_out;
+  next = strm.next_in;
+  input = strm.input;
+  have = strm.avail_in;
+  hold = state.hold;
+  bits = state.bits;
+  //---
+
+  _in = have;
+  _out = left;
+  ret = Z_OK;
+
+  inf_leave: // goto emulation
+  for (;;) {
+    switch (state.mode) {
+      case HEAD:
+        if (state.wrap === 0) {
+          state.mode = TYPEDO;
+          break;
+        }
+        //=== NEEDBITS(16);
+        while (bits < 16) {
+          if (have === 0) { break inf_leave; }
+          have--;
+          hold += input[next++] << bits;
+          bits += 8;
+        }
+        //===//
+        if ((state.wrap & 2) && hold === 0x8b1f) {  /* gzip header */
+          if (state.wbits === 0) {
+            state.wbits = 15;
+          }
+          state.check = 0/*crc32(0L, Z_NULL, 0)*/;
+          //=== CRC2(state.check, hold);
+          hbuf[0] = hold & 0xff;
+          hbuf[1] = (hold >>> 8) & 0xff;
+          state.check = crc32(state.check, hbuf, 2, 0);
+          //===//
+
+          //=== INITBITS();
+          hold = 0;
+          bits = 0;
+          //===//
+          state.mode = FLAGS;
+          break;
+        }
+        if (state.head) {
+          state.head.done = false;
+        }
+        if (!(state.wrap & 1) ||   /* check if zlib header allowed */
+          (((hold & 0xff)/*BITS(8)*/ << 8) + (hold >> 8)) % 31) {
+          strm.msg = 'incorrect header check';
+          state.mode = BAD;
+          break;
+        }
+        if ((hold & 0x0f)/*BITS(4)*/ !== Z_DEFLATED) {
+          strm.msg = 'unknown compression method';
+          state.mode = BAD;
+          break;
+        }
+        //--- DROPBITS(4) ---//
+        hold >>>= 4;
+        bits -= 4;
+        //---//
+        len = (hold & 0x0f)/*BITS(4)*/ + 8;
+        if (state.wbits === 0) {
+          state.wbits = len;
+        }
+        if (len > 15 || len > state.wbits) {
+          strm.msg = 'invalid window size';
+          state.mode = BAD;
+          break;
+        }
+
+        // !!! pako patch. Force use `options.windowBits` if passed.
+        // Required to always use max window size by default.
+        state.dmax = 1 << state.wbits;
+        //state.dmax = 1 << len;
+
+        state.flags = 0;               /* indicate zlib header */
+        //Tracev((stderr, "inflate:   zlib header ok\n"));
+        strm.adler = state.check = 1/*adler32(0L, Z_NULL, 0)*/;
+        state.mode = hold & 0x200 ? DICTID : TYPE;
+        //=== INITBITS();
+        hold = 0;
+        bits = 0;
+        //===//
+        break;
+      case FLAGS:
+        //=== NEEDBITS(16); */
+        while (bits < 16) {
+          if (have === 0) { break inf_leave; }
+          have--;
+          hold += input[next++] << bits;
+          bits += 8;
+        }
+        //===//
+        state.flags = hold;
+        if ((state.flags & 0xff) !== Z_DEFLATED) {
+          strm.msg = 'unknown compression method';
+          state.mode = BAD;
+          break;
+        }
+        if (state.flags & 0xe000) {
+          strm.msg = 'unknown header flags set';
+          state.mode = BAD;
+          break;
+        }
+        if (state.head) {
+          state.head.text = ((hold >> 8) & 1);
+        }
+        if ((state.flags & 0x0200) && (state.wrap & 4)) {
+          //=== CRC2(state.check, hold);
+          hbuf[0] = hold & 0xff;
+          hbuf[1] = (hold >>> 8) & 0xff;
+          state.check = crc32(state.check, hbuf, 2, 0);
+          //===//
+        }
+        //=== INITBITS();
+        hold = 0;
+        bits = 0;
+        //===//
+        state.mode = TIME;
+        /* falls through */
+      case TIME:
+        //=== NEEDBITS(32); */
+        while (bits < 32) {
+          if (have === 0) { break inf_leave; }
+          have--;
+          hold += input[next++] << bits;
+          bits += 8;
+        }
+        //===//
+        if (state.head) {
+          state.head.time = hold;
+        }
+        if ((state.flags & 0x0200) && (state.wrap & 4)) {
+          //=== CRC4(state.check, hold)
+          hbuf[0] = hold & 0xff;
+          hbuf[1] = (hold >>> 8) & 0xff;
+          hbuf[2] = (hold >>> 16) & 0xff;
+          hbuf[3] = (hold >>> 24) & 0xff;
+          state.check = crc32(state.check, hbuf, 4, 0);
+          //===
+        }
+        //=== INITBITS();
+        hold = 0;
+        bits = 0;
+        //===//
+        state.mode = OS;
+        /* falls through */
+      case OS:
+        //=== NEEDBITS(16); */
+        while (bits < 16) {
+          if (have === 0) { break inf_leave; }
+          have--;
+          hold += input[next++] << bits;
+          bits += 8;
+        }
+        //===//
+        if (state.head) {
+          state.head.xflags = (hold & 0xff);
+          state.head.os = (hold >> 8);
+        }
+        if ((state.flags & 0x0200) && (state.wrap & 4)) {
+          //=== CRC2(state.check, hold);
+          hbuf[0] = hold & 0xff;
+          hbuf[1] = (hold >>> 8) & 0xff;
+          state.check = crc32(state.check, hbuf, 2, 0);
+          //===//
+        }
+        //=== INITBITS();
+        hold = 0;
+        bits = 0;
+        //===//
+        state.mode = EXLEN;
+        /* falls through */
+      case EXLEN:
+        if (state.flags & 0x0400) {
+          //=== NEEDBITS(16); */
+          while (bits < 16) {
+            if (have === 0) { break inf_leave; }
+            have--;
+            hold += input[next++] << bits;
+            bits += 8;
+          }
+          //===//
+          state.length = hold;
+          if (state.head) {
+            state.head.extra_len = hold;
+          }
+          if ((state.flags & 0x0200) && (state.wrap & 4)) {
+            //=== CRC2(state.check, hold);
+            hbuf[0] = hold & 0xff;
+            hbuf[1] = (hold >>> 8) & 0xff;
+            state.check = crc32(state.check, hbuf, 2, 0);
+            //===//
+          }
+          //=== INITBITS();
+          hold = 0;
+          bits = 0;
+          //===//
+        }
+        else if (state.head) {
+          state.head.extra = null/*Z_NULL*/;
+        }
+        state.mode = EXTRA;
+        /* falls through */
+      case EXTRA:
+        if (state.flags & 0x0400) {
+          copy = state.length;
+          if (copy > have) { copy = have; }
+          if (copy) {
+            if (state.head) {
+              len = state.head.extra_len - state.length;
+              if (!state.head.extra) {
+                // Use untyped array for more convenient processing later
+                state.head.extra = new Uint8Array(state.head.extra_len);
+              }
+              state.head.extra.set(
+                input.subarray(
+                  next,
+                  // extra field is limited to 65536 bytes
+                  // - no need for additional size check
+                  next + copy
+                ),
+                /*len + copy > state.head.extra_max - len ? state.head.extra_max : copy,*/
+                len
+              );
+              //zmemcpy(state.head.extra + len, next,
+              //        len + copy > state.head.extra_max ?
+              //        state.head.extra_max - len : copy);
+            }
+            if ((state.flags & 0x0200) && (state.wrap & 4)) {
+              state.check = crc32(state.check, input, copy, next);
+            }
+            have -= copy;
+            next += copy;
+            state.length -= copy;
+          }
+          if (state.length) { break inf_leave; }
+        }
+        state.length = 0;
+        state.mode = NAME;
+        /* falls through */
+      case NAME:
+        if (state.flags & 0x0800) {
+          if (have === 0) { break inf_leave; }
+          copy = 0;
+          do {
+            // TODO: 2 or 1 bytes?
+            len = input[next + copy++];
+            /* use constant limit because in js we should not preallocate memory */
+            if (state.head && len &&
+                (state.length < 65536 /*state.head.name_max*/)) {
+              state.head.name += String.fromCharCode(len);
+            }
+          } while (len && copy < have);
+
+          if ((state.flags & 0x0200) && (state.wrap & 4)) {
+            state.check = crc32(state.check, input, copy, next);
+          }
+          have -= copy;
+          next += copy;
+          if (len) { break inf_leave; }
+        }
+        else if (state.head) {
+          state.head.name = null;
+        }
+        state.length = 0;
+        state.mode = COMMENT;
+        /* falls through */
+      case COMMENT:
+        if (state.flags & 0x1000) {
+          if (have === 0) { break inf_leave; }
+          copy = 0;
+          do {
+            len = input[next + copy++];
+            /* use constant limit because in js we should not preallocate memory */
+            if (state.head && len &&
+                (state.length < 65536 /*state.head.comm_max*/)) {
+              state.head.comment += String.fromCharCode(len);
+            }
+          } while (len && copy < have);
+          if ((state.flags & 0x0200) && (state.wrap & 4)) {
+            state.check = crc32(state.check, input, copy, next);
+          }
+          have -= copy;
+          next += copy;
+          if (len) { break inf_leave; }
+        }
+        else if (state.head) {
+          state.head.comment = null;
+        }
+        state.mode = HCRC;
+        /* falls through */
+      case HCRC:
+        if (state.flags & 0x0200) {
+          //=== NEEDBITS(16); */
+          while (bits < 16) {
+            if (have === 0) { break inf_leave; }
+            have--;
+            hold += input[next++] << bits;
+            bits += 8;
+          }
+          //===//
+          if ((state.wrap & 4) && hold !== (state.check & 0xffff)) {
+            strm.msg = 'header crc mismatch';
+            state.mode = BAD;
+            break;
+          }
+          //=== INITBITS();
+          hold = 0;
+          bits = 0;
+          //===//
+        }
+        if (state.head) {
+          state.head.hcrc = ((state.flags >> 9) & 1);
+          state.head.done = true;
+        }
+        strm.adler = state.check = 0;
+        state.mode = TYPE;
+        break;
+      case DICTID:
+        //=== NEEDBITS(32); */
+        while (bits < 32) {
+          if (have === 0) { break inf_leave; }
+          have--;
+          hold += input[next++] << bits;
+          bits += 8;
+        }
+        //===//
+        strm.adler = state.check = zswap32(hold);
+        //=== INITBITS();
+        hold = 0;
+        bits = 0;
+        //===//
+        state.mode = DICT;
+        /* falls through */
+      case DICT:
+        if (state.havedict === 0) {
+          //--- RESTORE() ---
+          strm.next_out = put;
+          strm.avail_out = left;
+          strm.next_in = next;
+          strm.avail_in = have;
+          state.hold = hold;
+          state.bits = bits;
+          //---
+          return Z_NEED_DICT;
+        }
+        strm.adler = state.check = 1/*adler32(0L, Z_NULL, 0)*/;
+        state.mode = TYPE;
+        /* falls through */
+      case TYPE:
+        if (flush === Z_BLOCK || flush === Z_TREES) { break inf_leave; }
+        /* falls through */
+      case TYPEDO:
+        if (state.last) {
+          //--- BYTEBITS() ---//
+          hold >>>= bits & 7;
+          bits -= bits & 7;
+          //---//
+          state.mode = CHECK;
+          break;
+        }
+        //=== NEEDBITS(3); */
+        while (bits < 3) {
+          if (have === 0) { break inf_leave; }
+          have--;
+          hold += input[next++] << bits;
+          bits += 8;
+        }
+        //===//
+        state.last = (hold & 0x01)/*BITS(1)*/;
+        //--- DROPBITS(1) ---//
+        hold >>>= 1;
+        bits -= 1;
+        //---//
+
+        switch ((hold & 0x03)/*BITS(2)*/) {
+          case 0:                             /* stored block */
+            //Tracev((stderr, "inflate:     stored block%s\n",
+            //        state.last ? " (last)" : ""));
+            state.mode = STORED;
+            break;
+          case 1:                             /* fixed block */
+            fixedtables(state);
+            //Tracev((stderr, "inflate:     fixed codes block%s\n",
+            //        state.last ? " (last)" : ""));
+            state.mode = LEN_;             /* decode codes */
+            if (flush === Z_TREES) {
+              //--- DROPBITS(2) ---//
+              hold >>>= 2;
+              bits -= 2;
+              //---//
+              break inf_leave;
+            }
+            break;
+          case 2:                             /* dynamic block */
+            //Tracev((stderr, "inflate:     dynamic codes block%s\n",
+            //        state.last ? " (last)" : ""));
+            state.mode = TABLE;
+            break;
+          case 3:
+            strm.msg = 'invalid block type';
+            state.mode = BAD;
+        }
+        //--- DROPBITS(2) ---//
+        hold >>>= 2;
+        bits -= 2;
+        //---//
+        break;
+      case STORED:
+        //--- BYTEBITS() ---// /* go to byte boundary */
+        hold >>>= bits & 7;
+        bits -= bits & 7;
+        //---//
+        //=== NEEDBITS(32); */
+        while (bits < 32) {
+          if (have === 0) { break inf_leave; }
+          have--;
+          hold += input[next++] << bits;
+          bits += 8;
+        }
+        //===//
+        if ((hold & 0xffff) !== ((hold >>> 16) ^ 0xffff)) {
+          strm.msg = 'invalid stored block lengths';
+          state.mode = BAD;
+          break;
+        }
+        state.length = hold & 0xffff;
+        //Tracev((stderr, "inflate:       stored length %u\n",
+        //        state.length));
+        //=== INITBITS();
+        hold = 0;
+        bits = 0;
+        //===//
+        state.mode = COPY_;
+        if (flush === Z_TREES) { break inf_leave; }
+        /* falls through */
+      case COPY_:
+        state.mode = COPY;
+        /* falls through */
+      case COPY:
+        copy = state.length;
+        if (copy) {
+          if (copy > have) { copy = have; }
+          if (copy > left) { copy = left; }
+          if (copy === 0) { break inf_leave; }
+          //--- zmemcpy(put, next, copy); ---
+          output.set(input.subarray(next, next + copy), put);
+          //---//
+          have -= copy;
+          next += copy;
+          left -= copy;
+          put += copy;
+          state.length -= copy;
+          break;
+        }
+        //Tracev((stderr, "inflate:       stored end\n"));
+        state.mode = TYPE;
+        break;
+      case TABLE:
+        //=== NEEDBITS(14); */
+        while (bits < 14) {
+          if (have === 0) { break inf_leave; }
+          have--;
+          hold += input[next++] << bits;
+          bits += 8;
+        }
+        //===//
+        state.nlen = (hold & 0x1f)/*BITS(5)*/ + 257;
+        //--- DROPBITS(5) ---//
+        hold >>>= 5;
+        bits -= 5;
+        //---//
+        state.ndist = (hold & 0x1f)/*BITS(5)*/ + 1;
+        //--- DROPBITS(5) ---//
+        hold >>>= 5;
+        bits -= 5;
+        //---//
+        state.ncode = (hold & 0x0f)/*BITS(4)*/ + 4;
+        //--- DROPBITS(4) ---//
+        hold >>>= 4;
+        bits -= 4;
+        //---//
+//#ifndef PKZIP_BUG_WORKAROUND
+        if (state.nlen > 286 || state.ndist > 30) {
+          strm.msg = 'too many length or distance symbols';
+          state.mode = BAD;
+          break;
+        }
+//#endif
+        //Tracev((stderr, "inflate:       table sizes ok\n"));
+        state.have = 0;
+        state.mode = LENLENS;
+        /* falls through */
+      case LENLENS:
+        while (state.have < state.ncode) {
+          //=== NEEDBITS(3);
+          while (bits < 3) {
+            if (have === 0) { break inf_leave; }
+            have--;
+            hold += input[next++] << bits;
+            bits += 8;
+          }
+          //===//
+          state.lens[order[state.have++]] = (hold & 0x07);//BITS(3);
+          //--- DROPBITS(3) ---//
+          hold >>>= 3;
+          bits -= 3;
+          //---//
+        }
+        while (state.have < 19) {
+          state.lens[order[state.have++]] = 0;
+        }
+        // We have separate tables & no pointers. 2 commented lines below not needed.
+        //state.next = state.codes;
+        //state.lencode = state.next;
+        // Switch to use dynamic table
+        state.lencode = state.lendyn;
+        state.lenbits = 7;
+
+        opts = { bits: state.lenbits };
+        ret = inflate_table(CODES, state.lens, 0, 19, state.lencode, 0, state.work, opts);
+        state.lenbits = opts.bits;
+
+        if (ret) {
+          strm.msg = 'invalid code lengths set';
+          state.mode = BAD;
+          break;
+        }
+        //Tracev((stderr, "inflate:       code lengths ok\n"));
+        state.have = 0;
+        state.mode = CODELENS;
+        /* falls through */
+      case CODELENS:
+        while (state.have < state.nlen + state.ndist) {
+          for (;;) {
+            here = state.lencode[hold & ((1 << state.lenbits) - 1)];/*BITS(state.lenbits)*/
+            here_bits = here >>> 24;
+            here_op = (here >>> 16) & 0xff;
+            here_val = here & 0xffff;
+
+            if ((here_bits) <= bits) { break; }
+            //--- PULLBYTE() ---//
+            if (have === 0) { break inf_leave; }
+            have--;
+            hold += input[next++] << bits;
+            bits += 8;
+            //---//
+          }
+          if (here_val < 16) {
+            //--- DROPBITS(here.bits) ---//
+            hold >>>= here_bits;
+            bits -= here_bits;
+            //---//
+            state.lens[state.have++] = here_val;
+          }
+          else {
+            if (here_val === 16) {
+              //=== NEEDBITS(here.bits + 2);
+              n = here_bits + 2;
+              while (bits < n) {
+                if (have === 0) { break inf_leave; }
+                have--;
+                hold += input[next++] << bits;
+                bits += 8;
+              }
+              //===//
+              //--- DROPBITS(here.bits) ---//
+              hold >>>= here_bits;
+              bits -= here_bits;
+              //---//
+              if (state.have === 0) {
+                strm.msg = 'invalid bit length repeat';
+                state.mode = BAD;
+                break;
+              }
+              len = state.lens[state.have - 1];
+              copy = 3 + (hold & 0x03);//BITS(2);
+              //--- DROPBITS(2) ---//
+              hold >>>= 2;
+              bits -= 2;
+              //---//
+            }
+            else if (here_val === 17) {
+              //=== NEEDBITS(here.bits + 3);
+              n = here_bits + 3;
+              while (bits < n) {
+                if (have === 0) { break inf_leave; }
+                have--;
+                hold += input[next++] << bits;
+                bits += 8;
+              }
+              //===//
+              //--- DROPBITS(here.bits) ---//
+              hold >>>= here_bits;
+              bits -= here_bits;
+              //---//
+              len = 0;
+              copy = 3 + (hold & 0x07);//BITS(3);
+              //--- DROPBITS(3) ---//
+              hold >>>= 3;
+              bits -= 3;
+              //---//
+            }
+            else {
+              //=== NEEDBITS(here.bits + 7);
+              n = here_bits + 7;
+              while (bits < n) {
+                if (have === 0) { break inf_leave; }
+                have--;
+                hold += input[next++] << bits;
+                bits += 8;
+              }
+              //===//
+              //--- DROPBITS(here.bits) ---//
+              hold >>>= here_bits;
+              bits -= here_bits;
+              //---//
+              len = 0;
+              copy = 11 + (hold & 0x7f);//BITS(7);
+              //--- DROPBITS(7) ---//
+              hold >>>= 7;
+              bits -= 7;
+              //---//
+            }
+            if (state.have + copy > state.nlen + state.ndist) {
+              strm.msg = 'invalid bit length repeat';
+              state.mode = BAD;
+              break;
+            }
+            while (copy--) {
+              state.lens[state.have++] = len;
+            }
+          }
+        }
+
+        /* handle error breaks in while */
+        if (state.mode === BAD) { break; }
+
+        /* check for end-of-block code (better have one) */
+        if (state.lens[256] === 0) {
+          strm.msg = 'invalid code -- missing end-of-block';
+          state.mode = BAD;
+          break;
+        }
+
+        /* build code tables -- note: do not change the lenbits or distbits
+           values here (9 and 6) without reading the comments in inftrees.h
+           concerning the ENOUGH constants, which depend on those values */
+        state.lenbits = 9;
+
+        opts = { bits: state.lenbits };
+        ret = inflate_table(LENS, state.lens, 0, state.nlen, state.lencode, 0, state.work, opts);
+        // We have separate tables & no pointers. 2 commented lines below not needed.
+        // state.next_index = opts.table_index;
+        state.lenbits = opts.bits;
+        // state.lencode = state.next;
+
+        if (ret) {
+          strm.msg = 'invalid literal/lengths set';
+          state.mode = BAD;
+          break;
+        }
+
+        state.distbits = 6;
+        //state.distcode.copy(state.codes);
+        // Switch to use dynamic table
+        state.distcode = state.distdyn;
+        opts = { bits: state.distbits };
+        ret = inflate_table(DISTS, state.lens, state.nlen, state.ndist, state.distcode, 0, state.work, opts);
+        // We have separate tables & no pointers. 2 commented lines below not needed.
+        // state.next_index = opts.table_index;
+        state.distbits = opts.bits;
+        // state.distcode = state.next;
+
+        if (ret) {
+          strm.msg = 'invalid distances set';
+          state.mode = BAD;
+          break;
+        }
+        //Tracev((stderr, 'inflate:       codes ok\n'));
+        state.mode = LEN_;
+        if (flush === Z_TREES) { break inf_leave; }
+        /* falls through */
+      case LEN_:
+        state.mode = LEN;
+        /* falls through */
+      case LEN:
+        if (have >= 6 && left >= 258) {
+          //--- RESTORE() ---
+          strm.next_out = put;
+          strm.avail_out = left;
+          strm.next_in = next;
+          strm.avail_in = have;
+          state.hold = hold;
+          state.bits = bits;
+          //---
+          inflate_fast(strm, _out);
+          //--- LOAD() ---
+          put = strm.next_out;
+          output = strm.output;
+          left = strm.avail_out;
+          next = strm.next_in;
+          input = strm.input;
+          have = strm.avail_in;
+          hold = state.hold;
+          bits = state.bits;
+          //---
+
+          if (state.mode === TYPE) {
+            state.back = -1;
+          }
+          break;
+        }
+        state.back = 0;
+        for (;;) {
+          here = state.lencode[hold & ((1 << state.lenbits) - 1)];  /*BITS(state.lenbits)*/
+          here_bits = here >>> 24;
+          here_op = (here >>> 16) & 0xff;
+          here_val = here & 0xffff;
+
+          if (here_bits <= bits) { break; }
+          //--- PULLBYTE() ---//
+          if (have === 0) { break inf_leave; }
+          have--;
+          hold += input[next++] << bits;
+          bits += 8;
+          //---//
+        }
+        if (here_op && (here_op & 0xf0) === 0) {
+          last_bits = here_bits;
+          last_op = here_op;
+          last_val = here_val;
+          for (;;) {
+            here = state.lencode[last_val +
+                    ((hold & ((1 << (last_bits + last_op)) - 1))/*BITS(last.bits + last.op)*/ >> last_bits)];
+            here_bits = here >>> 24;
+            here_op = (here >>> 16) & 0xff;
+            here_val = here & 0xffff;
+
+            if ((last_bits + here_bits) <= bits) { break; }
+            //--- PULLBYTE() ---//
+            if (have === 0) { break inf_leave; }
+            have--;
+            hold += input[next++] << bits;
+            bits += 8;
+            //---//
+          }
+          //--- DROPBITS(last.bits) ---//
+          hold >>>= last_bits;
+          bits -= last_bits;
+          //---//
+          state.back += last_bits;
+        }
+        //--- DROPBITS(here.bits) ---//
+        hold >>>= here_bits;
+        bits -= here_bits;
+        //---//
+        state.back += here_bits;
+        state.length = here_val;
+        if (here_op === 0) {
+          //Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
+          //        "inflate:         literal '%c'\n" :
+          //        "inflate:         literal 0x%02x\n", here.val));
+          state.mode = LIT;
+          break;
+        }
+        if (here_op & 32) {
+          //Tracevv((stderr, "inflate:         end of block\n"));
+          state.back = -1;
+          state.mode = TYPE;
+          break;
+        }
+        if (here_op & 64) {
+          strm.msg = 'invalid literal/length code';
+          state.mode = BAD;
+          break;
+        }
+        state.extra = here_op & 15;
+        state.mode = LENEXT;
+        /* falls through */
+      case LENEXT:
+        if (state.extra) {
+          //=== NEEDBITS(state.extra);
+          n = state.extra;
+          while (bits < n) {
+            if (have === 0) { break inf_leave; }
+            have--;
+            hold += input[next++] << bits;
+            bits += 8;
+          }
+          //===//
+          state.length += hold & ((1 << state.extra) - 1)/*BITS(state.extra)*/;
+          //--- DROPBITS(state.extra) ---//
+          hold >>>= state.extra;
+          bits -= state.extra;
+          //---//
+          state.back += state.extra;
+        }
+        //Tracevv((stderr, "inflate:         length %u\n", state.length));
+        state.was = state.length;
+        state.mode = DIST;
+        /* falls through */
+      case DIST:
+        for (;;) {
+          here = state.distcode[hold & ((1 << state.distbits) - 1)];/*BITS(state.distbits)*/
+          here_bits = here >>> 24;
+          here_op = (here >>> 16) & 0xff;
+          here_val = here & 0xffff;
+
+          if ((here_bits) <= bits) { break; }
+          //--- PULLBYTE() ---//
+          if (have === 0) { break inf_leave; }
+          have--;
+          hold += input[next++] << bits;
+          bits += 8;
+          //---//
+        }
+        if ((here_op & 0xf0) === 0) {
+          last_bits = here_bits;
+          last_op = here_op;
+          last_val = here_val;
+          for (;;) {
+            here = state.distcode[last_val +
+                    ((hold & ((1 << (last_bits + last_op)) - 1))/*BITS(last.bits + last.op)*/ >> last_bits)];
+            here_bits = here >>> 24;
+            here_op = (here >>> 16) & 0xff;
+            here_val = here & 0xffff;
+
+            if ((last_bits + here_bits) <= bits) { break; }
+            //--- PULLBYTE() ---//
+            if (have === 0) { break inf_leave; }
+            have--;
+            hold += input[next++] << bits;
+            bits += 8;
+            //---//
+          }
+          //--- DROPBITS(last.bits) ---//
+          hold >>>= last_bits;
+          bits -= last_bits;
+          //---//
+          state.back += last_bits;
+        }
+        //--- DROPBITS(here.bits) ---//
+        hold >>>= here_bits;
+        bits -= here_bits;
+        //---//
+        state.back += here_bits;
+        if (here_op & 64) {
+          strm.msg = 'invalid distance code';
+          state.mode = BAD;
+          break;
+        }
+        state.offset = here_val;
+        state.extra = (here_op) & 15;
+        state.mode = DISTEXT;
+        /* falls through */
+      case DISTEXT:
+        if (state.extra) {
+          //=== NEEDBITS(state.extra);
+          n = state.extra;
+          while (bits < n) {
+            if (have === 0) { break inf_leave; }
+            have--;
+            hold += input[next++] << bits;
+            bits += 8;
+          }
+          //===//
+          state.offset += hold & ((1 << state.extra) - 1)/*BITS(state.extra)*/;
+          //--- DROPBITS(state.extra) ---//
+          hold >>>= state.extra;
+          bits -= state.extra;
+          //---//
+          state.back += state.extra;
+        }
+//#ifdef INFLATE_STRICT
+        if (state.offset > state.dmax) {
+          strm.msg = 'invalid distance too far back';
+          state.mode = BAD;
+          break;
+        }
+//#endif
+        //Tracevv((stderr, "inflate:         distance %u\n", state.offset));
+        state.mode = MATCH;
+        /* falls through */
+      case MATCH:
+        if (left === 0) { break inf_leave; }
+        copy = _out - left;
+        if (state.offset > copy) {         /* copy from window */
+          copy = state.offset - copy;
+          if (copy > state.whave) {
+            if (state.sane) {
+              strm.msg = 'invalid distance too far back';
+              state.mode = BAD;
+              break;
+            }
+// (!) This block is disabled in zlib defaults,
+// don't enable it for binary compatibility
+//#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+//          Trace((stderr, "inflate.c too far\n"));
+//          copy -= state.whave;
+//          if (copy > state.length) { copy = state.length; }
+//          if (copy > left) { copy = left; }
+//          left -= copy;
+//          state.length -= copy;
+//          do {
+//            output[put++] = 0;
+//          } while (--copy);
+//          if (state.length === 0) { state.mode = LEN; }
+//          break;
+//#endif
+          }
+          if (copy > state.wnext) {
+            copy -= state.wnext;
+            from = state.wsize - copy;
+          }
+          else {
+            from = state.wnext - copy;
+          }
+          if (copy > state.length) { copy = state.length; }
+          from_source = state.window;
+        }
+        else {                              /* copy from output */
+          from_source = output;
+          from = put - state.offset;
+          copy = state.length;
+        }
+        if (copy > left) { copy = left; }
+        left -= copy;
+        state.length -= copy;
+        do {
+          output[put++] = from_source[from++];
+        } while (--copy);
+        if (state.length === 0) { state.mode = LEN; }
+        break;
+      case LIT:
+        if (left === 0) { break inf_leave; }
+        output[put++] = state.length;
+        left--;
+        state.mode = LEN;
+        break;
+      case CHECK:
+        if (state.wrap) {
+          //=== NEEDBITS(32);
+          while (bits < 32) {
+            if (have === 0) { break inf_leave; }
+            have--;
+            // Use '|' instead of '+' to make sure that result is signed
+            hold |= input[next++] << bits;
+            bits += 8;
+          }
+          //===//
+          _out -= left;
+          strm.total_out += _out;
+          state.total += _out;
+          if ((state.wrap & 4) && _out) {
+            strm.adler = state.check =
+                /*UPDATE_CHECK(state.check, put - _out, _out);*/
+                (state.flags ? crc32(state.check, output, _out, put - _out) : adler32(state.check, output, _out, put - _out));
+
+          }
+          _out = left;
+          // NB: crc32 stored as signed 32-bit int, zswap32 returns signed too
+          if ((state.wrap & 4) && (state.flags ? hold : zswap32(hold)) !== state.check) {
+            strm.msg = 'incorrect data check';
+            state.mode = BAD;
+            break;
+          }
+          //=== INITBITS();
+          hold = 0;
+          bits = 0;
+          //===//
+          //Tracev((stderr, "inflate:   check matches trailer\n"));
+        }
+        state.mode = LENGTH;
+        /* falls through */
+      case LENGTH:
+        if (state.wrap && state.flags) {
+          //=== NEEDBITS(32);
+          while (bits < 32) {
+            if (have === 0) { break inf_leave; }
+            have--;
+            hold += input[next++] << bits;
+            bits += 8;
+          }
+          //===//
+          if ((state.wrap & 4) && hold !== (state.total & 0xffffffff)) {
+            strm.msg = 'incorrect length check';
+            state.mode = BAD;
+            break;
+          }
+          //=== INITBITS();
+          hold = 0;
+          bits = 0;
+          //===//
+          //Tracev((stderr, "inflate:   length matches trailer\n"));
+        }
+        state.mode = DONE;
+        /* falls through */
+      case DONE:
+        ret = Z_STREAM_END;
+        break inf_leave;
+      case BAD:
+        ret = Z_DATA_ERROR;
+        break inf_leave;
+      case MEM:
+        return Z_MEM_ERROR;
+      case SYNC:
+        /* falls through */
+      default:
+        return Z_STREAM_ERROR;
+    }
+  }
+
+  // inf_leave <- here is real place for "goto inf_leave", emulated via "break inf_leave"
+
+  /*
+     Return from inflate(), updating the total counts and the check value.
+     If there was no progress during the inflate() call, return a buffer
+     error.  Call updatewindow() to create and/or update the window state.
+     Note: a memory error from inflate() is non-recoverable.
+   */
+
+  //--- RESTORE() ---
+  strm.next_out = put;
+  strm.avail_out = left;
+  strm.next_in = next;
+  strm.avail_in = have;
+  state.hold = hold;
+  state.bits = bits;
+  //---
+
+  if (state.wsize || (_out !== strm.avail_out && state.mode < BAD &&
+                      (state.mode < CHECK || flush !== Z_FINISH))) {
+    if (updatewindow(strm, strm.output, strm.next_out, _out - strm.avail_out)) {
+      state.mode = MEM;
+      return Z_MEM_ERROR;
+    }
+  }
+  _in -= strm.avail_in;
+  _out -= strm.avail_out;
+  strm.total_in += _in;
+  strm.total_out += _out;
+  state.total += _out;
+  if ((state.wrap & 4) && _out) {
+    strm.adler = state.check = /*UPDATE_CHECK(state.check, strm.next_out - _out, _out);*/
+      (state.flags ? crc32(state.check, output, _out, strm.next_out - _out) : adler32(state.check, output, _out, strm.next_out - _out));
+  }
+  strm.data_type = state.bits + (state.last ? 64 : 0) +
+                    (state.mode === TYPE ? 128 : 0) +
+                    (state.mode === LEN_ || state.mode === COPY_ ? 256 : 0);
+  if (((_in === 0 && _out === 0) || flush === Z_FINISH) && ret === Z_OK) {
+    ret = Z_BUF_ERROR;
+  }
+  return ret;
+};
+
+
+const inflateEnd = (strm) => {
+
+  if (inflateStateCheck(strm)) {
+    return Z_STREAM_ERROR;
+  }
+
+  let state = strm.state;
+  if (state.window) {
+    state.window = null;
+  }
+  strm.state = null;
+  return Z_OK;
+};
+
+
+const inflateGetHeader = (strm, head) => {
+
+  /* check state */
+  if (inflateStateCheck(strm)) { return Z_STREAM_ERROR; }
+  const state = strm.state;
+  if ((state.wrap & 2) === 0) { return Z_STREAM_ERROR; }
+
+  /* save header structure */
+  state.head = head;
+  head.done = false;
+  return Z_OK;
+};
+
+
+const inflateSetDictionary = (strm, dictionary) => {
+  const dictLength = dictionary.length;
+
+  let state;
+  let dictid;
+  let ret;
+
+  /* check state */
+  if (inflateStateCheck(strm)) { return Z_STREAM_ERROR; }
+  state = strm.state;
+
+  if (state.wrap !== 0 && state.mode !== DICT) {
+    return Z_STREAM_ERROR;
+  }
+
+  /* check for correct dictionary identifier */
+  if (state.mode === DICT) {
+    dictid = 1; /* adler32(0, null, 0)*/
+    /* dictid = adler32(dictid, dictionary, dictLength); */
+    dictid = adler32(dictid, dictionary, dictLength, 0);
+    if (dictid !== state.check) {
+      return Z_DATA_ERROR;
+    }
+  }
+  /* copy dictionary to window using updatewindow(), which will amend the
+   existing dictionary if appropriate */
+  ret = updatewindow(strm, dictionary, dictLength, dictLength);
+  if (ret) {
+    state.mode = MEM;
+    return Z_MEM_ERROR;
+  }
+  state.havedict = 1;
+  // Tracev((stderr, "inflate:   dictionary set\n"));
+  return Z_OK;
+};
+
+
+module.exports.inflateReset = inflateReset;
+module.exports.inflateReset2 = inflateReset2;
+module.exports.inflateResetKeep = inflateResetKeep;
+module.exports.inflateInit = inflateInit;
+module.exports.inflateInit2 = inflateInit2;
+module.exports.inflate = inflate;
+module.exports.inflateEnd = inflateEnd;
+module.exports.inflateGetHeader = inflateGetHeader;
+module.exports.inflateSetDictionary = inflateSetDictionary;
+module.exports.inflateInfo = 'pako inflate (from Nodeca project)';
+
+/* Not implemented
+module.exports.inflateCodesUsed = inflateCodesUsed;
+module.exports.inflateCopy = inflateCopy;
+module.exports.inflateGetDictionary = inflateGetDictionary;
+module.exports.inflateMark = inflateMark;
+module.exports.inflatePrime = inflatePrime;
+module.exports.inflateSync = inflateSync;
+module.exports.inflateSyncPoint = inflateSyncPoint;
+module.exports.inflateUndermine = inflateUndermine;
+module.exports.inflateValidate = inflateValidate;
+*/