@arcgis/map-components 4.33.0-next.161 → 4.33.0-next.163

package/dist/docs/vscode.html-custom-data.json

@@ -144,7 +144,7 @@
     },
     {
       "name": "arcgis-area-measurement-3d",
-      "description": "The Area Measurement 3D component calculates and displays the area and perimeter of a polygon.\nThis component can be used in a [SceneView](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html)\nto measure the area and perimeter of a polygon.\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `clear(): Promise<void>`\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Permanently destroy the component.\n- `start(): Promise<void>`",
+      "description": "The Area Measurement 3D component calculates and displays the area and perimeter of a polygon.\nIt can be used in a [Scene](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/)\ncomponent to measure the area and perimeter of a polygon.\n\n[![measurement-area-3d](https://developers.arcgis.com/javascript/latest/assets/img/apiref/widgets/3D_AreaMeasurement_widget.png)](https://developers.arcgis.com/javascript/latest/sample-code/measurement-3d/)\n\nHow the area and perimeter are computed depends on the scene's spatial reference and the length of the measured perimeter.\n\nIn **geographic coordinate systems** (GCS) and in **Web Mercator**:\n- If the measurement's perimeter is below 100 km, they are computed in a Euclidean manner,\n  in an [ECEF](https://en.wikipedia.org/wiki/ECEF) coordinate system (or equivalent on other planets).\n- If the perimeter is above 100 km, they are computed geodetically, and the visualization takes\n  the curvature of the planet into consideration.\n\nIn **projected coordinate systems** (PCS), apart from Web Mercator, the area and perimeter\nare always calculated in a Euclidean manner (in their respective PCS).\n\nThe area may be visualized and calculated in two ways:\n1. If all the vertices are more or less **coplanar** (aligning onto a horizontal or a sloped plane),\n  the area and perimeter are projected to that plane. Also, the measurements are computed on that plane.\n2. If the vertices have varying z-values and they create a **non-planar** surface, the visualization and the\nmeasurements show the area and perimeter that are projected to a horizontal plane.\n\n![area-measurement-3d-types](https://developers.arcgis.com/javascript/latest/assets/img/apiref/widgets/area-measurement-3d-types.png)\n\nWhen the component is active, a horizontal \"laser\" line is drawn which indicates the height at the current mouse position.\nThis line can help in analyzing the heights of objects relative to each other and the terrain.\n\nThe Area Measurement 3D is designed to work in the Scene component. For measurements in the [Map](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-map/)\ncomponent, use [Area Measurement 2D](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-area-measurement-2d/).\n\n**Things to consider**\n\n* Snapping is enabled by default. This can be temporarily disabled by holding the `CTRL` key.\n* Layer types currently supported for snapping are:\n[FeatureLayer](https://developers.arcgis.com/javascript/latest/api-reference/esri-layers-FeatureLayer.html),\n[GraphicsLayer](https://developers.arcgis.com/javascript/latest/api-reference/esri-layers-GraphicsLayer.html) (except Mesh geometries),\n[GeoJSONLayer](https://developers.arcgis.com/javascript/latest/api-reference/esri-layers-GeoJSONLayer.html),\n[WFSLayer](https://developers.arcgis.com/javascript/latest/api-reference/esri-layers-WFSLayer.html),\n[CSVLayer](https://developers.arcgis.com/javascript/latest/api-reference/esri-layers-CSVLayer.html),\n[3D Object SceneLayer](https://developers.arcgis.com/javascript/latest/api-reference/esri-layers-SceneLayer.html),\nand [BuildingSceneLayer](https://developers.arcgis.com/javascript/latest/api-reference/esri-layers-BuildingSceneLayer.html).\n\n**See also**\n\n- [AreaMeasurementAnalysis](https://developers.arcgis.com/javascript/latest/api-reference/esri-analysis-AreaMeasurementAnalysis.html)\n- [Sample - Measurement in 3D](https://developers.arcgis.com/javascript/latest/sample-code/measurement-3d/)\n- [Sample - Analysis objects](https://developers.arcgis.com/javascript/latest/sample-code/analysis-objects/)\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `clear(): Promise<void>` - Clears the current measurement.\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Permanently destroy the component.\n- `start(): Promise<void>` - Starts a new measurement.",
       "attributes": [
         {
           "name": "auto-destroy-disabled",
@@ -200,7 +200,7 @@
         },
         {
           "name": "state",
-          "description": "The current state of the component.",
+          "description": "The component's state. The values mean the following:\n\n* `disabled` -  not ready yet\n* `ready` - ready for measuring\n* `measuring` - currently measuring\n* `measured` - measuring has finished",
           "values": [
             {
               "name": "disabled"
@@ -218,7 +218,7 @@
         },
         {
           "name": "unit",
-          "description": "Unit system (imperial, metric) or specific unit used for displaying the distance values.",
+          "description": "Unit system (imperial, metric) or specific unit used for displaying the area values. Possible values are listed in\n[unitOptions](#unitOptions).",
           "values": [
             {
               "name": "acres"
@@ -974,7 +974,7 @@
     },
     {
       "name": "arcgis-building-explorer",
-      "description": "The Building Explorer component is used to filter and explore the various components of [BuildingSceneLayers](https://developers.arcgis.com/javascript/latest/api-reference/esri-layers-BuildingSceneLayer.html). BuildingSceneLayers are complex digital models of buildings and interiors and can contain thousands of components grouped in sublayers. Using this component, buildings can be filtered by level, construction phase or by disciplines and categories.\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Permanently destroy the component.",
+      "description": "The Building Explorer component is used to filter and explore the various components of [BuildingSceneLayers](https://developers.arcgis.com/javascript/latest/api-reference/esri-layers-BuildingSceneLayer.html). BuildingSceneLayers are complex digital models of buildings and interiors and can contain thousands of components grouped in sublayers. Using this component, buildings can be filtered by level, construction phase or by disciplines and categories.\n\n**Known limitations**\n\nBuilding Explorer is only supported in a 3D [Scene](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/) component.\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Permanently destroy the component.",
       "attributes": [
         {
           "name": "auto-destroy-disabled",
@@ -983,7 +983,7 @@
         },
         {
           "name": "heading-level",
-          "description": "Indicates the heading level to use for the headings in the widget.",
+          "description": "Indicates the heading level to use for the component title.",
           "values": []
         },
         {
@@ -1000,12 +1000,12 @@
         },
         {
           "name": "icon",
-          "description": "Icon which represents the widget.",
+          "description": "Icon which represents the component. Typically used when the component is controlled by another component (e.g. by the Expand component).\n\nSee also: [Calcite Icons](https://developers.arcgis.com/calcite-design-system/icons/)",
           "values": []
         },
         {
           "name": "label",
-          "description": "The widget's default label.\n\n[Read more...](https://developers.arcgis.com/javascript/latest/api-reference/esri-widgets-BuildingExplorer.html#label)",
+          "description": "The component's default label.",
           "values": []
         },
         {
@@ -1047,7 +1047,7 @@
         },
         {
           "name": "state",
-          "description": "The current state of the view model that can be used for rendering the UI of the widget.\n\n[Read more...](https://developers.arcgis.com/javascript/latest/api-reference/esri-widgets-BuildingExplorer-BuildingExplorerViewModel.html#state)",
+          "description": "The component's state. The values mean the following:\n\n* `disabled` -  \tcomponent is being created\n* `loading` - layers and statistics are loading\n* `ready` - component is ready\n* `failed` - component failed to load data",
           "values": [
             {
               "name": "disabled"
@@ -1488,7 +1488,7 @@
     },
     {
       "name": "arcgis-daylight",
-      "description": "The Daylight component can be used to manipulate the lighting conditions of a [SceneView](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html).\n--\n\n### Events\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n- **arcgisUserDateTimeChange** - Fires when the user changes the date or time in the widget by interacting with the slider, the date picker, the\nseason selector or the play buttons.\n\n### Methods\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Permanently destroy the component.",
+      "description": "The Daylight component can be used to manipulate the lighting conditions of a [Scene](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/).\n\n**Known limitations**\n\nDaylight is only supported in a 3D [Scene](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/) component.\n--\n\n### Events\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n- **arcgisUserDateTimeChange** - Fires when the user changes the date or time in the component by interacting with the slider, the date picker, the\nseason selector or the play buttons.\n\n### Methods\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Permanently destroy the component.",
       "attributes": [
         {
           "name": "auto-destroy-disabled",
@@ -1515,7 +1515,7 @@
         },
         {
           "name": "date-or-season",
-          "description": "Controls whether the widget displays a date or a season picker.",
+          "description": "Controls whether the component displays a date or a season picker.",
           "values": [
             {
               "name": "date"
@@ -1532,7 +1532,7 @@
         },
         {
           "name": "heading-level",
-          "description": "Indicates the heading level to use for the widget title.",
+          "description": "Indicates the heading level to use for the component title.",
           "values": []
         },
         {
@@ -1561,12 +1561,12 @@
         },
         {
           "name": "icon",
-          "description": "Icon which represents the widget.",
+          "description": "Icon which represents the component. Typically used when the component is controlled by another component (e.g. by the Expand component).\n\nSee also: [Calcite Icons](https://developers.arcgis.com/calcite-design-system/icons/)",
           "values": []
         },
         {
           "name": "label",
-          "description": "The widget's default label.\n\n[Read more...](https://developers.arcgis.com/javascript/latest/api-reference/esri-widgets-Daylight.html#label)",
+          "description": "The component's default label.",
           "values": []
         },
         {
@@ -1925,7 +1925,7 @@
     },
     {
       "name": "arcgis-direct-line-measurement-3d",
-      "description": "The Direct Line Measurement 3D component calculates and displays the 3D distance between two points. This component\ncan be used in a [SceneView](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html)\nto measure the vertical, horizontal, and direct distance between two points.\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `clear(): Promise<void>`\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Permanently destroy the component.\n- `start(): Promise<void>`",
+      "description": "The Direct Line Measurement 3D component calculates and displays the 3D distance between two points.\nIt can be used in a [Scene](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/)\ncomponent to measure the vertical, horizontal, and direct distance between two points.\n\n[![measurement-line-3d](https://developers.arcgis.com/javascript/latest/assets/img/apiref/widgets/3D_DirectLineMeasurement_widget.png)](https://developers.arcgis.com/javascript/latest/sample-code/measurement-3d/)\n\nHow distances are computed depends on the scene's spatial reference.\n\nIn **geographic coordinate systems** (GCS) and in **Web Mercator**:\n- Direct distance is computed in a Euclidean manner, in an [ECEF](https://en.wikipedia.org/wiki/ECEF) coordinate system (or equivalent on other planets);\n- Horizontal distance is computed geodetically, taking into consideration the curvature of the planet;\n- Vertical distance is computed as an elevation difference.\n\nIn **projected coordinate systems** (PCS), apart from Web Mercator, all three distances (direct, horizontal, and vertical)\n are computed in a Euclidean manner (in their respective PCS).\n\nDirectLineMeasurement3D widget visualizes and labels the direct, horizontal, and vertical distances and displays the same values\nin the UI panel. When the distance between the points is greater than 100 kilometers,\nthe measurement visualization is simplified, and only the horizontal and vertical distances are calculated.\nThe direct distance option becomes unavailable.\n\n![measurement-line-3d](https://developers.arcgis.com/javascript/latest/assets/img/apiref/widgets/direct-line-measurement-3d.png)\n\nWhen the widget is active, a horizontal \"laser\" line is drawn which indicates the height at the current mouse position.\nThis line can help in analyzing the heights of objects relative to each other and the terrain.\nA second laser line shows the intersection of the scene with the vertical plane that passes through the checkered line.\n\nThe Direct Line Measurement 3D is designed to work in the Scene component. For measurements in the [Map](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-map/)\ncomponent, use [Distance Measurement 2D](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-distance-measurement-2d/).\n\n**Things to consider**\n\n* Snapping is enabled by default. This can be temporarily disabled by holding the `CTRL` key.\n* Layer types currently supported for snapping are:\n[FeatureLayer](https://developers.arcgis.com/javascript/latest/api-reference/esri-layers-FeatureLayer.html),\n[GraphicsLayer](https://developers.arcgis.com/javascript/latest/api-reference/esri-layers-GraphicsLayer.html) (except Mesh geometries),\n[GeoJSONLayer](https://developers.arcgis.com/javascript/latest/api-reference/esri-layers-GeoJSONLayer.html),\n[WFSLayer](https://developers.arcgis.com/javascript/latest/api-reference/esri-layers-WFSLayer.html),\n[CSVLayer](https://developers.arcgis.com/javascript/latest/api-reference/esri-layers-CSVLayer.html),\n[3D Object SceneLayer](https://developers.arcgis.com/javascript/latest/api-reference/esri-layers-SceneLayer.html),\nand [BuildingSceneLayer](https://developers.arcgis.com/javascript/latest/api-reference/esri-layers-BuildingSceneLayer.html).\n\n**See also**\n\n- [DirectLineMeasurementAnalysis](https://developers.arcgis.com/javascript/latest/api-reference/esri-analysis-DirectLineMeasurementAnalysis.html)\n- [Sample - Measurement in 3D](https://developers.arcgis.com/javascript/latest/sample-code/measurement-3d/)\n- [Sample - Analysis objects](https://developers.arcgis.com/javascript/latest/sample-code/analysis-objects/)\n- [Sample - Color theming for interactive tools](https://developers.arcgis.com/javascript/latest/sample-code/view-theme/)\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `clear(): Promise<void>` - Clears the current measurement.\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Permanently destroy the component.\n- `start(): Promise<void>` - Starts a new measurement.",
       "attributes": [
         {
           "name": "auto-destroy-disabled",
@@ -1981,6 +1981,7 @@
         },
         {
           "name": "state",
+          "description": "The component's state. The values mean the following:\n\n* `disabled` -  not ready yet\n* `ready` - ready for measuring\n* `measuring` - currently measuring\n* `measured` - measuring has finished",
           "values": [
             {
               "name": "disabled"
@@ -1998,7 +1999,7 @@
         },
         {
           "name": "unit",
-          "description": "Unit system (imperial, metric) or specific unit used for displaying the distance values.",
+          "description": "Unit system (imperial, metric) or specific unit used for displaying the distance values. Possible values are listed in\n[unitOptions](#unitOptions).",
           "values": [
             {
               "name": "centimeters"
@@ -2055,7 +2056,7 @@
     },
     {
       "name": "arcgis-directline-measurement-3d",
-      "description": "**Deprecated**. The Direct Line Measurement 3D component calculates and displays the 3D distance between two points. This component can be used in a [SceneView](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html) to measure the vertical, horizontal, and direct distance between two points.\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `clear(): Promise<void>`\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Permanently destroy the component.\n- `start(): Promise<void>`",
+      "description": "**Deprecated**. The Directline Measurement 3D component calculates and displays the 3D distance between two points. It can be used in a [Scene](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/) component to measure the vertical, horizontal, and direct distance between two points.\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `clear(): Promise<void>` - Clears the current measurement.\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Permanently destroy the component.\n- `start(): Promise<void>` - Starts a new measurement.",
       "attributes": [
         {
           "name": "auto-destroy-disabled",
@@ -2111,6 +2112,7 @@
         },
         {
           "name": "state",
+          "description": "The component's state. The values mean the following:\n\n* `disabled` -  not ready yet\n* `ready` - ready for measuring\n* `measuring` - currently measuring\n* `measured` - measuring has finished",
           "values": [
             {
               "name": "disabled"
@@ -2128,7 +2130,7 @@
         },
         {
           "name": "unit",
-          "description": "Unit system (imperial, metric) or specific unit used for displaying the distance values.",
+          "description": "Unit system (imperial, metric) or specific unit used for displaying the distance values. Possible values are listed in\n[unitOptions](#unitOptions).",
           "values": [
             {
               "name": "centimeters"
@@ -2529,12 +2531,12 @@
         },
         {
           "name": "icon",
-          "description": "Icon which represents the widget.",
+          "description": "Icon which represents the component. Typically used when the component is controlled by another component (e.g. by the Expand component).\n\nSee also: [Calcite Icons](https://developers.arcgis.com/calcite-design-system/icons/)",
           "values": []
         },
         {
           "name": "label",
-          "description": "The widget's default label.\n\n[Read more...](https://developers.arcgis.com/javascript/latest/api-reference/esri-widgets-ElevationProfile.html#label)",
+          "description": "The component's default label.",
           "values": []
         },
         {
@@ -2576,7 +2578,7 @@
         },
         {
           "name": "state",
-          "description": "The current state of the view model that can be used for rendering the UI\nof the widget.\n\n[Read more...](https://developers.arcgis.com/javascript/latest/api-reference/esri-widgets-ElevationProfile-ElevationProfileViewModel.html#state)",
+          "description": "The component's state. The values mean the following:\n\n* `disabled` -  component is being created\n* `ready` - component is ready; no path configured and no interactive operation ongoing\n* `creating` - user is creating a new input path\n* `created` - input path is configured but no interactive operation is ongoing\n* `selecting` - user is selecting an existing input path\n* `selected` - user selected an existing input path",
           "values": [
             {
               "name": "created"
@@ -4686,7 +4688,7 @@
     },
     {
       "name": "arcgis-line-of-sight",
-      "description": "The Line Of Sight component is a 3D analysis tool that allows you to perform\n[line of sight visibility analysis](https://developers.arcgis.com/javascript/latest/api-reference/esri-analysis-LineOfSightAnalysis.html)\nin a 3D view. Visibility between a given observer and multiple target points is calculated against the currently\ndisplayed content in the view, including ground, integrated meshes, and 3D objects such as buildings or trees.\n\nThe results from the analysis are displayed as lines, where the visible part, indicating what the observer can see,\nis colored green. Visible targets are displayed with a green sphere and a fully green line of sight.\nThe spheres marking occluded targets are displayed red, as are the occluded parts of the lines of sight.\nWhen the line of sight cannot be calculated, it will be displayed with a gray color. This may happen if either\nthe target or the observer is not in the view.\n\nWhen creating a new line of sight analysis with the component, the first click in the scene creates the\n[observer](https://developers.arcgis.com/javascript/latest/api-reference/esri-analysis-LineOfSightAnalysisObserver.html)\nand any further clicks place the [targets](https://developers.arcgis.com/javascript/latest/api-reference/esri-analysis-LineOfSightAnalysisTarget.html).\nBoth, observer and target points, can be moved by dragging them. Additionally, the target points can be removed with a right click.\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `clear(): Promise<void>` - Clear the current analysis results. After calling this method, the user can set a new observer and targets.\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `continue(): Promise<void>` - After [stop()](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-line-of-sight/#stop)\nwas called, this method allows to continue the line of sight analysis and add more targets.\n- `destroy(): Promise<void>` - Permanently destroy the component.\n- `start(): Promise<void>` - Start a new line of sight analysis.\n- `stop(): Promise<void>` - Stop the current line of sight analysis, keeping the results in the view.\nUsers can still interact with existing targets and the observer but they cannot place new target points.",
+      "description": "The Line Of Sight component is a 3D analysis tool that allows you to perform\n[line of sight visibility analysis](https://developers.arcgis.com/javascript/latest/api-reference/esri-analysis-LineOfSightAnalysis.html)\nin a 3D view. Visibility between a given observer and multiple target points is calculated against the currently\ndisplayed content in the view, including ground, integrated meshes, and 3D objects such as buildings or trees.\n\nThe results from the analysis are displayed as lines, where the visible part, indicating what the observer can see,\nis colored green. Visible targets are displayed with a green sphere and a fully green line of sight.\nThe spheres marking occluded targets are displayed red, as are the occluded parts of the lines of sight.\nWhen the line of sight cannot be calculated, it will be displayed with a gray color. This may happen if either\nthe target or the observer is not in the view.\n\nWhen creating a new line of sight analysis with the component, the first click in the scene creates the\n[observer](https://developers.arcgis.com/javascript/latest/api-reference/esri-analysis-LineOfSightAnalysisObserver.html)\nand any further clicks place the [targets](https://developers.arcgis.com/javascript/latest/api-reference/esri-analysis-LineOfSightAnalysisTarget.html).\nBoth, observer and target points, can be moved by dragging them. Additionally, the target points can be removed with a right click.\n\n**Known limitations**\n\nLine Of Sight is only supported in a 3D [Scene](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/) component.\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `clear(): Promise<void>` - Clear the current analysis results. After calling this method, the user can set a new observer and targets.\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `continue(): Promise<void>` - After [stop()](#stop) was called, this method allows to continue the line of sight analysis and add more targets.\n- `destroy(): Promise<void>` - Permanently destroy the component.\n- `start(): Promise<void>` - Start a new line of sight analysis.\n- `stop(): Promise<void>` - Stop the current line of sight analysis, keeping the results in the view.\nUsers can still interact with existing targets and the observer but they cannot place new target points.",
       "attributes": [
         {
           "name": "auto-destroy-disabled",
@@ -5388,7 +5390,7 @@
     },
     {
       "name": "arcgis-navigation-toggle",
-      "description": "The Navigation Toggle component can be used to control the navigation mode of a Scene component.\n\nWhen the navigation mode is set to \"pan\" (default), the mouse drag gesture pans the view and right-click + drag allows the user\nto rotate the view. When the navigation mode is set to \"rotate\", the mouse drag gesture rotates the view and\nright-click + drag pans the view.\n\nThe Navigation Toggle component is only supported in 3D.\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `toggle(): Promise<void>`",
+      "description": "The Navigation Toggle component can be used to control the navigation mode of a Scene component.\n\nWhen the navigation mode is set to \"pan\" (default), the mouse drag gesture pans the view and right-click + drag allows the user\nto rotate the view. When the navigation mode is set to \"rotate\", the mouse drag gesture rotates the view and\nright-click + drag pans the view.\n\n**Known limitations**\n\nNavigation Toggle is only supported in a 3D [Scene](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/) component.\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `toggle(): Promise<void>`",
       "attributes": [
         {
           "name": "icon",
@@ -5414,7 +5416,7 @@
         },
         {
           "name": "navigation-mode",
-          "description": "The navigation mode of the view. See the table below for a list of\npossible values.\n\nPossible Value | Description\n---------------|-------------\npan | The mouse drag gesture pans the view. Right-click + drag allows the user to perform a 3D rotate around the center of the view.\nrotate | The mouse drag gesture performs a 3D rotate around the center of the view and the right-click + drag gesture pans the view.",
+          "description": "The navigation mode of the view. The possible values:\n\n* `pan` - The mouse drag gesture pans the view. Right-click + drag allows the user to perform a 3D rotate around the center of the view.\n* `rotate` - The mouse drag gesture performs a 3D rotate around the center of the view and the right-click + drag gesture pans the view.",
           "values": [
             {
               "name": "pan"
@@ -6049,7 +6051,7 @@
     },
     {
       "name": "arcgis-scene",
-      "description": "The ArcGIS Scene component is used to add 3D maps to web applications. For 2D maps, use the\n[ArcGIS Map component](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-map/).\n\nThe Scene component creates a [SceneView](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html)\nand loads a [WebScene](https://developers.arcgis.com/javascript/latest/api-reference/esri-WebScene.html) item from either\n[ArcGIS Online](https://www.arcgis.com/home/index.html) or [ArcGIS Enterprise portal](https://enterprise.arcgis.com/en/portal/latest/administer/windows/what-is-portal-for-arcgis-.htm).\n\n```html\n<arcgis-scene item-id=\"e2da7564e4f24eaaa918ffd70378056a\"></arcgis-scene>\n```\n\nAlternatively, the Scene component can be initialized without a WebScene item:\n\n```html\n<arcgis-scene\n basemap=\"satellite\"\n ground=\"world-elevation\"\n camera-position=\"12.3808, 46.3959, 4400\"\n camera-tilt=\"75\"\n camera-heading=\"300\">\n</arcgis-scene>\n```\n\nFurther components can be added and connected to the Scene component:\n\n```html\n<arcgis-scene item-id=\"e2da7564e4f24eaaa918ffd70378056a\">\n  <arcgis-layer-list position=\"bottom-right\"></arcgis-layer-list>\n</arcgis-scene>\n```\n\nThe Scene component can be customized further using any of the [core API functionalities](https://developers.arcgis.com/javascript/latest/api-reference/)\nof the ArcGIS Maps SDK for JavaScript.\n\n```js\nconst viewElement = document.querySelector(\"arcgis-scene\");\nviewElement.addEventListener(\"arcgisViewReadyChange\", () => {\n  const layer = new GraphicsLayer({ title: \"My layer\"});\n  viewElement.map.add(layer);\n});\n```\n\nSee also:\n- [SDK sample apps using the Scene component](https://developers.arcgis.com/javascript/latest/sample-code/?tagged=arcgis-scene)\n- [Getting started](https://developers.arcgis.com/javascript/latest/get-started-overview/)\n- [Programming patterns](https://developers.arcgis.com/javascript/latest/programming-patterns/)\n--\n\n### Events\n- **arcgisAnalysisViewCreate** - Fires when the view for an analysis is created.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-analysis-view-create)\n- **arcgisAnalysisViewCreateError** - Fires when an error occurs during the creation of an analysis view after an analysis is added to the view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-analysis-view-create-error)\n- **arcgisAnalysisViewDestroy** - Fires after an analysis view is destroyed.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-analysis-view-destroy)\n- **arcgisViewChange** - This event is for view related property changes:\n[zoom](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#zoom),\n[scale](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#scale),\n[center](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#center),\n[rotation](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#rotation),\n[extent](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#extent),\n[camera](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#camera),\n[viewpoint](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#viewpoint).\nThis event will also emit if [stationary](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#stationary)\ntoggles from `true` to `false`.\n- **arcgisViewClick** - Fires after a user clicks on the view.\n\n```js\nviewElement.addEventListener(\"arcgisViewClick\", (event) => {\n  viewElement.hitTest(event.detail).then((response) => {\n     const result = response.results[0];\n     // ....\n  });\n});\n```\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-click)\n- **arcgisViewDoubleClick** - Fires after double-clicking on the view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-double-click)\n- **arcgisViewDrag** - Fires during a pointer drag on the view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-drag)\n- **arcgisViewHold** - Fires after holding either a mouse button or a single finger on the view for a short amount of time.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-hold)\n- **arcgisViewImmediateClick** - Fires right after a user clicks on the view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-immediate-click)\n- **arcgisViewImmediateDoubleClick** - Is emitted after two consecutive immediate-click events.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-immediate-double-click)\n- **arcgisViewKeyDown** - Fires after a keyboard key is pressed.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-key-down)\n- **arcgisViewKeyUp** - Fires after a keyboard key is released.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-key-up)\n- **arcgisViewLayerviewCreate** - Fires after each layer in the map has a corresponding LayerView created and rendered in the view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-layerview-create)\n- **arcgisViewLayerviewCreateError** - Fires when an error emits during the creation of a LayerView after a layer has been added to the map.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-layerview-create-error)\n- **arcgisViewLayerviewDestroy** - Fires after a LayerView is destroyed and is no longer rendered in the view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-layerview-destroy)\n- **arcgisViewMouseWheel** - Fires when a wheel button of a pointing device (typically a mouse) is scrolled on the view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-mouse-wheel)\n- **arcgisViewPointerDown** - Fires after a mouse button is pressed, or a finger touches the display.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-pointer-down)\n- **arcgisViewPointerEnter** - Fires after a mouse cursor enters the view, or a display touch begins.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-pointer-enter)\n- **arcgisViewPointerLeave** - Fires after a mouse cursor leaves the view, or a display touch ends.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-pointer-leave)\n- **arcgisViewPointerMove** - Fires after the mouse or a finger on the display moves.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-pointer-move)\n- **arcgisViewPointerUp** - Fires after a mouse button is released, or a display touch ends.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-pointer-up)\n- **arcgisViewReadyChange** - This event is for the [ready](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#ready)\nproperty and will be emitted when the view is ready.\nThis event will also emit if the [map](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#map) property is changed.\n\n```js\nviewElement.addEventListener(\"arcgisViewReadyChange\", () => {\n   const layer = new GraphicsLayer({ title: \"My layer\"});\n   viewElement.map.add(layer);\n});\n```\n\n### Methods\n- `addLayer(layer: __esri.Layer | Promise<any>, index?: number): Promise<void>` - **Deprecated**: since 4.33, use `element.map.add(layer)` instead.\n\nAdds a layer to the [map's](https://next.sites.afd.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#map) `layers` collection.. \n- `addLayers(layers: __esri.Layer[], index?: number): Promise<void>` - **Deprecated**: since 4.33, use `element.map.addMany([layer])` instead.\n\nAdds a layer or array of layers to the [map's](https://next.sites.afd.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#map) `layers` collection.. \n- `addTable(table: __esri.FeatureLayer): Promise<void>` - **Deprecated**: since 4.33, use `element.map.tables.add(table)` instead.\n\nAdds a table to the [map's](https://next.sites.afd.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#map) `tables` collection.. \n- `addTables(tables: __esri.FeatureLayer[], index?: number): Promise<void>` - **Deprecated**: since 4.33, use `element.map.tables.addMany([table])` instead.\n\nAdds a table or array of tables to the [map's](https://next.sites.afd.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#map) `tables` collection.. \n- `closePopup(): Promise<void>` - Closes the [popup](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#popup).\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Destroys the Scene component, and any associated resources, including its\n[map](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#map),\n[popup](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#popup),\nand removes components or other UI DOM elements added to it.\n- `goTo(target: __esri.GoToTarget3D, options?: __esri.GoToOptions3D): Promise<unknown>` - Sets the view to a given target.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#goTo)\n- `hitTest(screenPoint: __esri.SceneViewScreenPoint | MouseEvent, options?: __esri.SceneViewHitTestOptions): Promise<__esri.SceneViewHitTestResult>` - Returns [hit test results](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#HitTestResult)\nfrom each layer that intersects the specified screen coordinates.\n\n```js\nviewElement.addEventListener(\"arcgisViewClick\", (event) => {\n  viewElement.hitTest(event.detail).then((response) => {\n     const result = response.results[0];\n     if (result?.type === \"graphic\") {\n        const { longitude, latitude } = result.mapPoint;\n        console.log(\"Hit graphic at (\" + longitude + \", \" + latitude + \")\", result.graphic);\n     } else {\n        console.log(\"Did not hit any graphic\");\n     }\n  });\n});\n```\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#hitTest)\n- `openPopup(options?: __esri.PopupViewOpenPopupOptions): Promise<void>` - Opens the popup based on input options.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#openPopup)\n- `takeScreenshot(options?: __esri.SceneViewTakeScreenshotOptions): Promise<__esri.SceneViewScreenshot>` - Creates a screenshot of the current view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#takeScreenshot)\n- `toMap(screenPoint: __esri.SceneViewScreenPoint | MouseEvent, options?: __esri.SceneViewToMapOptions): __esri.Point | nullish` - Converts the given screen point to a [map point](https://developers.arcgis.com/javascript/latest/api-reference/esri-geometry-Point.html).\n- `toScreen(point: __esri.Point): __esri.SceneViewScreenPoint` - Converts the given [map point](https://developers.arcgis.com/javascript/latest/api-reference/esri-geometry-Point.html) to a screen point.\n- `tryFatalErrorRecovery(): Promise<void>` - Call this method to clear any fatal errors resulting from a lost WebGL context.\n- `viewOnReady(callback?: (): void, errback?: (error: Error) => void): Promise<void>` - `viewOnReady()` may be leveraged once an instance of the component and its underlying [view](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#view) is created and ready.\nThis method takes two input parameters, a `callback` function and an `errback` function, and returns a promise. The `callback` executes when the promise resolves, and the `errback` executes if the promise is rejected.\n- `whenAnalysisView(analysis: __esri.AreaMeasurementAnalysis | __esri.DimensionAnalysis | __esri.DirectLineMeasurementAnalysis | __esri.LineOfSightAnalysis | __esri.SliceAnalysis | __esri.ViewshedAnalysis): Promise<__esri.AreaMeasurementAnalysisView3D | __esri.DimensionAnalysisView3D | __esri.DirectLineMeasurementAnalysisView3D | __esri.LineOfSightAnalysisView3D | __esri.SliceAnalysisView3D | __esri.ViewshedAnalysisView3D>` - Gets the analysis view created for the given analysis object.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#whenAnalysisView)\n- `whenLayerView(layer: __esri.Layer): Promise<__esri.LayerView>` - Gets the layer view created on the view for the given layer.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#whenLayerView)",
+      "description": "The ArcGIS Scene component is used to add 3D maps to web applications. For 2D maps, use the\n[ArcGIS Map component](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-map/).\n\nThe Scene component creates a [SceneView](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html)\nand loads a [WebScene](https://developers.arcgis.com/javascript/latest/api-reference/esri-WebScene.html) item from either\n[ArcGIS Online](https://www.arcgis.com/home/index.html) or [ArcGIS Enterprise portal](https://enterprise.arcgis.com/en/portal/latest/administer/windows/what-is-portal-for-arcgis-.htm).\n\n```html\n<arcgis-scene item-id=\"e2da7564e4f24eaaa918ffd70378056a\"></arcgis-scene>\n```\n\nAlternatively, the Scene component can be initialized without a WebScene item:\n\n```html\n<arcgis-scene\n basemap=\"satellite\"\n ground=\"world-elevation\"\n camera-position=\"12.3808, 46.3959, 4400\"\n camera-tilt=\"75\"\n camera-heading=\"300\">\n</arcgis-scene>\n```\n\nFurther components can be added and connected to the Scene component:\n\n```html\n<arcgis-scene item-id=\"e2da7564e4f24eaaa918ffd70378056a\">\n  <arcgis-layer-list position=\"bottom-right\"></arcgis-layer-list>\n</arcgis-scene>\n```\n\nThe Scene component can be customized further using any of the [core API functionalities](https://developers.arcgis.com/javascript/latest/api-reference/)\nof the ArcGIS Maps SDK for JavaScript.\n\n```js\nconst viewElement = document.querySelector(\"arcgis-scene\");\nviewElement.addEventListener(\"arcgisViewReadyChange\", () => {\n  const layer = new GraphicsLayer({ title: \"My layer\"});\n  viewElement.map.add(layer);\n});\n```\n\n**See also**\n\n- [SDK sample apps using the Scene component](https://developers.arcgis.com/javascript/latest/sample-code/?tagged=arcgis-scene)\n- [Getting started](https://developers.arcgis.com/javascript/latest/get-started-overview/)\n- [Programming patterns](https://developers.arcgis.com/javascript/latest/programming-patterns/)\n--\n\n### Events\n- **arcgisAnalysisViewCreate** - Fires when the view for an analysis is created.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-analysis-view-create)\n- **arcgisAnalysisViewCreateError** - Fires when an error occurs during the creation of an analysis view after an analysis is added to the view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-analysis-view-create-error)\n- **arcgisAnalysisViewDestroy** - Fires after an analysis view is destroyed.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-analysis-view-destroy)\n- **arcgisViewChange** - This event is for view related property changes: [zoom](#zoom), [scale](#scale), [center](#center), [rotation](#rotation), [extent](#extent),\n[camera](#camera), [viewpoint](#viewpoint). This event will also emit if [stationary](#stationary) toggles from `true` to `false`.\n- **arcgisViewClick** - Fires after a user clicks on the view.\n\n```js\nviewElement.addEventListener(\"arcgisViewClick\", (event) => {\n  viewElement.hitTest(event.detail).then((response) => {\n     const result = response.results[0];\n     // ....\n  });\n});\n```\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-click)\n- **arcgisViewDoubleClick** - Fires after double-clicking on the view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-double-click)\n- **arcgisViewDrag** - Fires during a pointer drag on the view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-drag)\n- **arcgisViewHold** - Fires after holding either a mouse button or a single finger on the view for a short amount of time.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-hold)\n- **arcgisViewImmediateClick** - Fires right after a user clicks on the view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-immediate-click)\n- **arcgisViewImmediateDoubleClick** - Is emitted after two consecutive immediate-click events.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-immediate-double-click)\n- **arcgisViewKeyDown** - Fires after a keyboard key is pressed.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-key-down)\n- **arcgisViewKeyUp** - Fires after a keyboard key is released.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-key-up)\n- **arcgisViewLayerviewCreate** - Fires after each layer in the map has a corresponding LayerView created and rendered in the view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-layerview-create)\n- **arcgisViewLayerviewCreateError** - Fires when an error emits during the creation of a LayerView after a layer has been added to the map.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-layerview-create-error)\n- **arcgisViewLayerviewDestroy** - Fires after a LayerView is destroyed and is no longer rendered in the view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-layerview-destroy)\n- **arcgisViewMouseWheel** - Fires when a wheel button of a pointing device (typically a mouse) is scrolled on the view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-mouse-wheel)\n- **arcgisViewPointerDown** - Fires after a mouse button is pressed, or a finger touches the display.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-pointer-down)\n- **arcgisViewPointerEnter** - Fires after a mouse cursor enters the view, or a display touch begins.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-pointer-enter)\n- **arcgisViewPointerLeave** - Fires after a mouse cursor leaves the view, or a display touch ends.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-pointer-leave)\n- **arcgisViewPointerMove** - Fires after the mouse or a finger on the display moves.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-pointer-move)\n- **arcgisViewPointerUp** - Fires after a mouse button is released, or a display touch ends.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#event-pointer-up)\n- **arcgisViewReadyChange** - This event is for the [ready](#ready) property and will be emitted when the view is ready.\nThis event will also emit if the [map](#map) property is changed.\n\n```js\nviewElement.addEventListener(\"arcgisViewReadyChange\", () => {\n   const layer = new GraphicsLayer({ title: \"My layer\"});\n   viewElement.map.add(layer);\n});\n```\n\n### Methods\n- `addLayer(layer: __esri.Layer | Promise<any>, index?: number): Promise<void>` - **Deprecated**: since 4.33, use `element.map.add(layer)` instead.\n\nAdds a layer to the [map's](https://next.sites.afd.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#map) `layers` collection.. \n- `addLayers(layers: __esri.Layer[], index?: number): Promise<void>` - **Deprecated**: since 4.33, use `element.map.addMany([layer])` instead.\n\nAdds a layer or array of layers to the [map's](https://next.sites.afd.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#map) `layers` collection.. \n- `addTable(table: __esri.FeatureLayer): Promise<void>` - **Deprecated**: since 4.33, use `element.map.tables.add(table)` instead.\n\nAdds a table to the [map's](https://next.sites.afd.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#map) `tables` collection.. \n- `addTables(tables: __esri.FeatureLayer[], index?: number): Promise<void>` - **Deprecated**: since 4.33, use `element.map.tables.addMany([table])` instead.\n\nAdds a table or array of tables to the [map's](https://next.sites.afd.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#map) `tables` collection.. \n- `closePopup(): Promise<void>` - Closes the [popup](#popup).\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Destroys the Scene component, and any associated resources, including its [map](#map), [popup](#popup),\nand removes components or other UI DOM elements added to it.\n- `goTo(target: __esri.GoToTarget3D, options?: __esri.GoToOptions3D): Promise<unknown>` - Sets the view to a given target.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#goTo)\n- `hitTest(screenPoint: __esri.SceneViewScreenPoint | MouseEvent, options?: __esri.SceneViewHitTestOptions): Promise<__esri.SceneViewHitTestResult>` - Returns [hit test results](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#HitTestResult)\nfrom each layer that intersects the specified screen coordinates.\n\n```js\nviewElement.addEventListener(\"arcgisViewClick\", (event) => {\n  viewElement.hitTest(event.detail).then((response) => {\n     const result = response.results[0];\n     if (result?.type === \"graphic\") {\n        const { longitude, latitude } = result.mapPoint;\n        console.log(\"Hit graphic at (\" + longitude + \", \" + latitude + \")\", result.graphic);\n     } else {\n        console.log(\"Did not hit any graphic\");\n     }\n  });\n});\n```\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#hitTest)\n- `openPopup(options?: __esri.PopupViewOpenPopupOptions): Promise<void>` - Opens the popup based on input options.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#openPopup)\n- `takeScreenshot(options?: __esri.SceneViewTakeScreenshotOptions): Promise<__esri.SceneViewScreenshot>` - Creates a screenshot of the current view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#takeScreenshot)\n- `toMap(screenPoint: __esri.SceneViewScreenPoint | MouseEvent, options?: __esri.SceneViewToMapOptions): __esri.Point | nullish` - Converts the given screen point to a [map point](https://developers.arcgis.com/javascript/latest/api-reference/esri-geometry-Point.html).\n- `toScreen(point: __esri.Point): __esri.SceneViewScreenPoint` - Converts the given [map point](https://developers.arcgis.com/javascript/latest/api-reference/esri-geometry-Point.html) to a screen point.\n- `tryFatalErrorRecovery(): Promise<void>` - Call this method to clear any fatal errors resulting from a lost WebGL context.\n- `viewOnReady(callback?: (): void, errback?: (error: Error) => void): Promise<void>` - `viewOnReady()` may be leveraged once an instance of the component and its underlying [view](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#view) is created and ready.\nThis method takes two input parameters, a `callback` function and an `errback` function, and returns a promise. The `callback` executes when the promise resolves, and the `errback` executes if the promise is rejected.\n- `whenAnalysisView(analysis: __esri.AreaMeasurementAnalysis | __esri.DimensionAnalysis | __esri.DirectLineMeasurementAnalysis | __esri.LineOfSightAnalysis | __esri.SliceAnalysis | __esri.ViewshedAnalysis): Promise<__esri.AreaMeasurementAnalysisView3D | __esri.DimensionAnalysisView3D | __esri.DirectLineMeasurementAnalysisView3D | __esri.LineOfSightAnalysisView3D | __esri.SliceAnalysisView3D | __esri.ViewshedAnalysisView3D>` - Gets the analysis view created for the given analysis object.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#whenAnalysisView)\n- `whenLayerView(layer: __esri.Layer): Promise<__esri.LayerView>` - Gets the layer view created on the view for the given layer.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#whenLayerView)",
       "attributes": [
         {
           "name": "alpha-compositing-enabled",
@@ -6068,27 +6070,27 @@
         },
         {
           "name": "camera-fov",
-          "description": "The diagonal field of view (fov) angle for the camera. The range of angles must be between 1 and 170 degrees.\n\nSetting the camera fov immediately changes the current view. For animating the view, see this component's\n[goTo()](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#goTo) method.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-Camera.html#fov)",
+          "description": "The diagonal field of view (fov) angle for the camera. The range of angles must be between 1 and 170 degrees.\n\nSetting the camera fov immediately changes the current view. For animating the view, see this component's\n[goTo()](#goTo) method.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-Camera.html#fov)",
           "values": []
         },
         {
           "name": "camera-heading",
-          "description": "The compass heading of the camera in degrees.\n\nSetting the camera heading immediately changes the current view. For animating the view, see this component's\n[goTo()](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#goTo) method.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-Camera.html#heading)",
+          "description": "The compass heading of the camera in degrees.\n\nSetting the camera heading immediately changes the current view. For animating the view, see this component's\n[goTo()](#goTo) method.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-Camera.html#heading)",
           "values": []
         },
         {
           "name": "camera-position",
-          "description": "The position of the camera defined by a map point. It can be a string with the format `\"<longitude>, <latitude>, <elevation>\"`\nor a [Point](https://developers.arcgis.com/javascript/latest/api-reference/esri-geometry-Point.html) instance.\n\nSetting the camera position immediately changes the current view. For animating the view, see this component's\n[goTo()](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#goTo) method.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-Camera.html#position)",
+          "description": "The position of the camera defined by a map point. It can either be set with a\n[Point](https://developers.arcgis.com/javascript/latest/api-reference/esri-geometry-Point.html) instance\nor a string in the format: longitude, latitude, elevation. E.g. `\"12.3808, 46.3959, 4400\"`.\n\nSetting the camera position immediately changes the current view. For animating the view, see this component's\n[goTo()](#goTo) method.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-Camera.html#position)",
           "values": []
         },
         {
           "name": "camera-tilt",
-          "description": "The tilt of the camera in degrees with respect to the surface as projected down from the camera position.\n\nSetting the camera tilt immediately changes the current view. For animating the view, see this component's\n[goTo()](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#goTo) method.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-Camera.html#tilt)",
+          "description": "The tilt of the camera in degrees with respect to the surface as projected down from the camera position.\n\nSetting the camera tilt immediately changes the current view. For animating the view, see this component's\n[goTo()](#goTo) method.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-Camera.html#tilt)",
           "values": []
         },
         {
           "name": "center",
-          "description": "Represents the center point of the view. It can be a string with the format `\"<longitude>, <latitude>\"`\nor a [Point](https://developers.arcgis.com/javascript/latest/api-reference/esri-geometry-Point.html) instance.\n\nSetting the center immediately changes the current view. For animating the view, see this component's\n[goTo()](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#goTo) method.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#center)",
+          "description": "Represents the center point of the view. It can be a string with the format `\"<longitude>, <latitude>\"`\nor a [Point](https://developers.arcgis.com/javascript/latest/api-reference/esri-geometry-Point.html) instance.\n\nSetting the center immediately changes the current view. For animating the view, see this component's\n[goTo()](#goTo) method.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#center)",
           "values": []
         },
         {
@@ -6113,7 +6115,7 @@
         },
         {
           "name": "quality-profile",
-          "description": "SceneView can draw scenes in three different quality modes: `high`, `medium` and `low`.\n\n[Read more...](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#qualityProfile)",
+          "description": "Scenes can be drawn in three different quality modes: `high`, `medium` and `low`.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#qualityProfile)",
           "values": [
             {
               "name": "high"
@@ -6128,7 +6130,7 @@
         },
         {
           "name": "scale",
-          "description": "Represents the map scale at the center of the view.\n\nSetting the scale immediately changes the view. For animating\nthe view, see this component's [goTo()](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#goTo) method.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#scale)",
+          "description": "Represents the map scale at the center of the view.\n\nSetting the scale immediately changes the view. For animating\nthe view, see this component's [goTo()](#goTo) method.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#scale)",
           "values": []
         },
         {
@@ -6150,7 +6152,7 @@
         },
         {
           "name": "zoom",
-          "description": "Represents the level of detail (LOD) at the center of the view.\n\nSetting the zoom immediately changes the current view. For animating the view, see this component's [goTo()](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#goTo) method.\nSetting this property in conjunction with [center](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/#center)\nis a convenient way to set the initial extent of the view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#zoom)",
+          "description": "Represents the level of detail (LOD) at the center of the view.\n\nSetting the zoom immediately changes the current view. For animating the view, see this component's [goTo()](#goTo) method.\nSetting this property in conjunction with [center](#center)\nis a convenient way to set the initial extent of the view.\n\n[Read more](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html#zoom)",
           "values": []
         }
       ],
@@ -6303,7 +6305,7 @@
         },
         {
           "name": "state",
-          "description": "The current state of the widget.\n\n[Read more...](https://developers.arcgis.com/javascript/latest/api-reference/esri-widgets-Search-SearchViewModel.html#state)",
+          "description": "The current state.\n\n[Read more...](https://developers.arcgis.com/javascript/latest/api-reference/esri-widgets-Search-SearchViewModel.html#state)",
           "values": [
             {
               "name": "disabled"
@@ -6355,7 +6357,7 @@
     },
     {
       "name": "arcgis-shadow-cast",
-      "description": "The Shadow Cast component displays the cumulative shadows of 3D features in a [SceneView](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html).\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Permanently destroy the component.\n- `getDuration(point: __esri.Point): Promise<number>`\n- `start(): Promise<void>`\n- `stop(): Promise<void>`",
+      "description": "The Shadow Cast component displays the cumulative shadows of 3D features in a [Scene](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/).\n\n**Known limitations**\n\nShadow Cast is only supported in a 3D [Scene](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/) component.\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Permanently destroy the component.\n- `getDuration(point: __esri.Point): Promise<number>`\n- `start(): Promise<void>`\n- `stop(): Promise<void>`",
       "attributes": [
         {
           "name": "auto-destroy-disabled",
@@ -6418,12 +6420,12 @@
         },
         {
           "name": "icon",
-          "description": "Icon which represents the widget.",
+          "description": "Icon which represents the component. Typically used when the component is controlled by another component (e.g. by the Expand component).\n\nSee also: [Calcite Icons](https://developers.arcgis.com/calcite-design-system/icons/)",
           "values": []
         },
         {
           "name": "label",
-          "description": "The widget's default label.\n\n[Read more...](https://developers.arcgis.com/javascript/latest/api-reference/esri-widgets-ShadowCast.html#label)",
+          "description": "The component's default label.",
           "values": []
         },
         {
@@ -6470,7 +6472,7 @@
         },
         {
           "name": "state",
-          "description": "The current state of the view model that can be used for rendering the UI\nof the widget.\n\n[Read more...](https://developers.arcgis.com/javascript/latest/api-reference/esri-widgets-ShadowCast-ShadowCastViewModel.html#state)",
+          "description": "The component's state. The values mean the following:\n\n* `disabled` -  component is being created\n* `ready` - component is ready",
           "values": [
             {
               "name": "disabled"
@@ -6482,7 +6484,7 @@
         },
         {
           "name": "utc-offset",
-          "description": "The difference in hours between UTC time and the times displayed in the widget.\n\n[Read more...](https://developers.arcgis.com/javascript/latest/api-reference/esri-widgets-ShadowCast-ShadowCastViewModel.html#utcOffset)",
+          "description": "The difference in hours between UTC time and the times displayed in the component.",
           "values": []
         },
         {
@@ -6787,7 +6789,7 @@
     },
     {
       "name": "arcgis-slice",
-      "description": "The Slice component is a 3D analysis tool that can be used to reveal occluded content in a 3D view. It applies\n[slice analysis](https://developers.arcgis.com/javascript/latest/api-reference/esri-analysis-SliceAnalysis.html)\nto any layer type, making it possible to see inside buildings or to explore geological surfaces.\n\nThe slicing [shape](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-slice/#shape)\nis always a [plane](https://developers.arcgis.com/javascript/latest/api-reference/esri-analysis-SlicePlane.html).\nBy default, the plane is either horizontal or vertical. To allow a tilt angle for the plane, set\n[tiltEnabled](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-slice/#tiltEnabled)\nto `true`. The slice hides any content in front of the surface. The handles on the sides of the plane can be used to adjust\nthe size, heading, tilt, and position of the slice plane.\nThe [SlicePlane](https://developers.arcgis.com/javascript/latest/api-reference/esri-analysis-SlicePlane.html)\ncan be set or retrieved using the [shape](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-slice/#shape) property.\n\nOnce the slice plane is applied, layers can be excluded from the slicing. For example, by excluding the sublayers which include\ncolumns and floor slabs, the inner structure of a building can investigated.\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `clear(): Promise<void>` - Clear the [shape](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-slice/#shape) of the slice,\neffectively removing it from the view. Other properties like [excludedLayers](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-slice/#excludedLayers)\nand [excludeGroundSurface](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-slice/#excludeGroundSurface) are not modified.\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Permanently destroy the component.\n- `start(): Promise<void>` - Start the interactive creation of a new slice, clearing the previous\n[shape](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-slice/#shape).",
+      "description": "The Slice component is a 3D analysis tool that can be used to reveal occluded content in a\n[Scene](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/). It applies\n[slice analysis](https://developers.arcgis.com/javascript/latest/api-reference/esri-analysis-SliceAnalysis.html)\nto any layer type, making it possible to see inside buildings or to explore geological surfaces.\n\n[![slice](https://developers.arcgis.com/javascript/latest/assets/img/apiref/widgets/slice.gif)](https://developers.arcgis.com/javascript/latest/sample-code/building-scene-layer-slice/index.html)\n\nThe slicing [shape](#shape)\nis always a [plane](https://developers.arcgis.com/javascript/latest/api-reference/esri-analysis-SlicePlane.html).\nBy default, the plane is either horizontal or vertical. To allow a tilt angle for the plane, set\n[tiltEnabled](#tiltEnabled)\nto `true`. The slice hides any content in front of the surface. The handles on the sides of the plane can be used to adjust\nthe size, heading, tilt, and position of the slice plane.\nThe [SlicePlane](https://developers.arcgis.com/javascript/latest/api-reference/esri-analysis-SlicePlane.html)\ncan be set or retrieved using the [shape](#shape) property.\n\nOnce the slice plane is applied, layers can be excluded from the slicing. For example, by excluding the sublayers which include\ncolumns and floor slabs, the inner structure of a building can investigated.\n\n[![slice-exclude](https://developers.arcgis.com/javascript/latest/assets/img/apiref/widgets/slice-exclude.png)](https://developers.arcgis.com/javascript/latest/sample-code/building-scene-layer-slice/index.html)\n\nWhen interactively creating a new slice, the Shift key can be held to force the slice to be applied vertically.\n\n**Known limitations**\n\nSlice is only supported in a 3D [Scene](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/) component.\n\n**See also**\n\n- [SliceAnalysis](https://developers.arcgis.com/javascript/latest/api-reference/esri-analysis-SliceAnalysis.html)\n- [Sample - BuildingSceneLayer with Slice component](https://developers.arcgis.com/javascript/latest/sample-code/building-scene-layer-slice/)\n- [Sample - Analysis objects](https://developers.arcgis.com/javascript/latest/sample-code/analysis-objects/)\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `clear(): Promise<void>` - Clear the [shape](#shape) of the slice, effectively removing it from the view. Other properties like [excludedLayers](#excludedLayers)\nand [excludeGroundSurface](#excludeGroundSurface) are not modified.\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Permanently destroy the component.\n- `start(): Promise<void>` - Start the interactive creation of a new slice, clearing the previous [shape](#shape).",
       "attributes": [
         {
           "name": "auto-destroy-disabled",
@@ -8491,7 +8493,7 @@
     },
     {
       "name": "arcgis-weather",
-      "description": "The Weather component provides an interface for easily selecting and configuring the weather effects in a [SceneView](https://developers.arcgis.com/javascript/latest/api-reference/esri-views-SceneView.html).\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Permanently destroy the component.",
+      "description": "The Weather component provides an interface for easily selecting and configuring the weather effects in a [Scene](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/).\n\n**Known limitations**\n\nWeather is only supported in a 3D [Scene](https://developers.arcgis.com/javascript/latest/references/map-components/arcgis-scene/) component.\n--\n\n### Events\n- **arcgisPropertyChange** - Emitted when the value of a property is changed. Use this to listen to changes to properties.\n- **arcgisReady** - Emitted when the component associated with a map or scene view is is ready to be interacted with.\n\n### Methods\n- `componentOnReady(): Promise<void>` - Create a promise that resolves once component is fully loaded.\n- `destroy(): Promise<void>` - Permanently destroy the component.",
       "attributes": [
         {
           "name": "auto-destroy-disabled",