@arcgis/core 5.2.0-next.95 → 5.2.0-next.97

package/geometry/geometryEngine.d.ts

@@ -34,7 +34,7 @@ export function extendedSpatialReferenceInfo(spatialReference: SpatialReference)
 /**
  * Calculates the clipped geometry from a target geometry by an envelope.
  *
- * @deprecated since version 4.32. Use [clipOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/clipOperator/) instead.
+ * @deprecated since version 4.32. Use [clipExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/clipOperator/#clipExecute) instead.
  * @param geometry - The geometry to be clipped.
  * @param envelope - The envelope used to clip.
  * @returns Clipped geometry.
@@ -53,7 +53,7 @@ export function clip(geometry: GeometryUnion, envelope: Extent): GeometryUnion;
  * be empty. An undefined cut will only be produced if a left cut or right cut was produced and there was a part
  * left over after cutting, or a cut is bounded to the left and right of the cutter.
  *
- * @deprecated since version 4.32. Use [cutOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/cutOperator/) instead.
+ * @deprecated since version 4.32. Use [cutExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/cutOperator/#cutExecute) instead.
  * @param geometry - The geometry to be cut.
  * @param cutter - The polyline to cut the geometry.
  * @returns Returns an array of geometries created by cutting the input geometry with the cutter.
@@ -66,7 +66,7 @@ export function cut(geometry: GeometryUnion, cutter: Polyline): GeometryUnion[];
 /**
  * Indicates if one geometry contains another geometry.
  *
- * @deprecated since version 4.32. Use [containsOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/containsOperator/) instead.
+ * @deprecated since version 4.32. Use [containsExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/containsOperator/#containsExecute) instead.
  * @param containerGeometry - The geometry that is tested for the "contains" relationship to the other geometry.
  *   Think of this geometry as the potential "container" of the `insideGeometry`.
  * @param insideGeometry - The geometry that is tested for the "within" relationship to the `containerGeometry`.
@@ -83,7 +83,7 @@ export function contains(containerGeometry: GeometryUnion, insideGeometry: Geome
 /**
  * Indicates if one geometry crosses another geometry.
  *
- * @deprecated since version 4.32. Use [crossesOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/crossesOperator/) instead.
+ * @deprecated since version 4.32. Use [crossesExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/crossesOperator/#crossesExecute) instead.
  * @param geometry1 - The geometry to cross.
  * @param geometry2 - The geometry being crossed.
  * @returns Returns `true` if `geometry1` crosses `geometry2`.
@@ -104,7 +104,7 @@ export function crosses(geometry1: GeometryUnion, geometry2: GeometryUnion): boo
  * > and ending points of a single path. Then use the polyline as input for the
  * > [geodesicLength()](https://developers.arcgis.com/javascript/latest/references/core/geometry/geometryEngine/#geodesicLength) method.
  *
- * @deprecated since version 4.32. Use [distanceOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/distanceOperator/) instead.
+ * @deprecated since version 4.32. Use [distanceExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/distanceOperator/#distanceExecute) instead.
  * @param geometry1 - First input geometry.
  * @param geometry2 - Second input geometry.
  * @param distanceUnit - Measurement unit of the return value.
@@ -119,7 +119,7 @@ export function distance(geometry1: GeometryUnion, geometry2: GeometryUnion, dis
 /**
  * Indicates if two geometries are equal.
  *
- * @deprecated since version 4.32. Use [equalsOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/equalsOperator/) instead.
+ * @deprecated since version 4.32. Use [equalsExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/equalsOperator/#equalsExecute) instead.
  * @param geometry1 - First input geometry.
  * @param geometry2 - Second input geometry.
  * @returns Returns `true` if the two input geometries are equal.
@@ -132,7 +132,7 @@ export function equals(geometry1: GeometryUnion, geometry2: GeometryUnion): bool
 /**
  * Indicates if one geometry intersects another geometry.
  *
- * @deprecated since version 4.32. Use [intersectsOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/intersectsOperator/) instead.
+ * @deprecated since version 4.32. Use [intersectsExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/intersectsOperator/#intersectsExecute) instead.
  * @param geometry1 - The geometry that is tested for the intersects relationship to the other geometry.
  * @param geometry2 - The geometry being intersected.
  * @returns Returns `true` if the input geometries intersect each other.
@@ -145,7 +145,7 @@ export function intersects(geometry1: GeometryUnion, geometry2: GeometryUnion):
 /**
  * Indicates if one geometry touches another geometry.
  *
- * @deprecated since version 4.32. Use [touchesOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/touchesOperator/) instead.
+ * @deprecated since version 4.32. Use [touchesExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/touchesOperator/#touchesExecute) instead.
  * @param geometry1 - The geometry to test the "touches" relationship with the other geometry.
  * @param geometry2 - The geometry to be touched.
  * @returns When `true`, `geometry1` touches `geometry2`.
@@ -158,7 +158,7 @@ export function touches(geometry1: GeometryUnion, geometry2: GeometryUnion): boo
 /**
  * Indicates if one geometry is within another geometry.
  *
- * @deprecated since version 4.32. Use [withinOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/withinOperator/) instead.
+ * @deprecated since version 4.32. Use [withinExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/withinOperator/#withinExecute) instead.
  * @param innerGeometry - The base geometry that is tested for the "within" relationship to the other geometry.
  * @param outerGeometry - The comparison geometry that is tested for the "contains" relationship to the other geometry.
  * @returns Returns `true` if `innerGeometry` is within `outerGeometry`.
@@ -171,7 +171,7 @@ export function within(innerGeometry: GeometryUnion, outerGeometry: GeometryUnio
 /**
  * Indicates if one geometry is disjoint (doesn't intersect in any way) with another geometry.
  *
- * @deprecated since version 4.32. Use [disjointOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/disjointOperator/) instead.
+ * @deprecated since version 4.32. Use [disjointExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/disjointOperator/#disjointExecute) instead.
  * @param geometry1 - The base geometry that is tested for the "disjoint" relationship to the other geometry.
  * @param geometry2 - The comparison geometry that is tested for the "disjoint" relationship to the other geometry.
  * @returns Returns `true` if `geometry1` and `geometry2` are disjoint (don't intersect in any way).
@@ -185,7 +185,7 @@ export function disjoint(geometry1: GeometryUnion, geometry2: GeometryUnion): bo
 /**
  * Indicates if one geometry overlaps another geometry.
  *
- * @deprecated since version 4.32. Use [overlapsOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/overlapsOperator/) instead.
+ * @deprecated since version 4.32. Use [overlapsExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/overlapsOperator/#overlapsExecute) instead.
  * @param geometry1 - The base geometry that is tested for the "overlaps" relationship with the other geometry.
  * @param geometry2 - The comparison geometry that is tested for the "overlaps" relationship with the other geometry.
  * @returns Returns `true` if the two geometries overlap.
@@ -199,7 +199,7 @@ export function overlaps(geometry1: GeometryUnion, geometry2: GeometryUnion): bo
 /**
  * Indicates if the given DE-9IM relation is true for the two geometries.
  *
- * @deprecated since version 4.32. Use [relateOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/relateOperator/) instead.
+ * @deprecated since version 4.32. Use [relateExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/relateOperator/#relateExecute) instead.
  * @param geometry1 - The first geometry for the relation.
  * @param geometry2 - The second geometry for the relation.
  * @param relation - The Dimensionally Extended 9 Intersection Model (DE-9IM) matrix relation
@@ -225,7 +225,7 @@ export function relate(geometry1: GeometryUnion, geometry2: GeometryUnion, relat
  * No polygon rings self-intersect.
  * Polylines paths that self-intersect are considered simple.
  *
- * @deprecated since version 4.32. Use [simplifyOperator's isSimple()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/simplifyOperator/#isSimple) method instead.
+ * @deprecated since version 4.32. Use [simplifyIsSimple()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/simplifyOperator/#simplifyIsSimple) method instead.
  * @param geometry - The input geometry.
  * @returns Returns `true` if the geometry is topologically simple.
  * @example
@@ -239,7 +239,7 @@ export function isSimple(geometry: GeometryUnion): boolean;
  * topologically legal with respect to their geometry type. At the end of a simplify operation, no polygon rings
  * or polyline paths will overlap, and no self-intersection will occur.
  *
- * @deprecated since version 4.32. Use [simplifyOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/simplifyOperator/) instead.
+ * @deprecated since version 4.32. Use [simplifyExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/simplifyOperator/#simplifyExecute) instead.
  * @param geometry - The geometry to be simplified.
  * @returns The simplified geometry.
  * @example
@@ -254,7 +254,7 @@ export function simplify(geometry: GeometryUnion): GeometryUnion;
  * The input can be a single geometry (such as a polyline) or an array of any geometry type. The hull is typically a polygon but can also
  * be a polyline or a point in degenerate cases.
  *
- * @deprecated since version 4.32. Use [convexHullOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/convexHullOperator/) instead.
+ * @deprecated since version 4.32. Use [convexHullExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/convexHullOperator/#convexHullExecute) instead.
  * @param geometries - The input geometry or geometries used to calculate
  *   the convex hull. If an array is specified, the input array can include various geometry types. When an array
  *   is provided, the output will also be an array.
@@ -283,7 +283,7 @@ export function convexHull(geometries: GeometryUnion | GeometryUnion[], merge: b
  * Creates the difference of two geometries. The resultant geometry is the portion of `inputGeometry` not in the `subtractor`.
  * The dimension of the `subtractor` has to be equal to or greater than that of the `inputGeometry`.
  *
- * @deprecated since version 4.32. Use [differenceOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/differenceOperator/) instead.
+ * @deprecated since version 4.32. Use [differenceExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/differenceOperator/#differenceExecute) instead.
  * @param inputGeometry - The input geometry to subtract from.
  * @param subtractor - The geometry being subtracted from inputGeometry.
  * @returns Returns the geometry of inputGeometry minus the subtractor geometry.
@@ -298,7 +298,7 @@ export function difference(inputGeometry: GeometryUnion | GeometryUnion[], subtr
  * Creates the symmetric difference of two geometries. The symmetric difference includes the parts
  * that are in either of the sets, but not in both.
  *
- * @deprecated since version 4.32. Use [symmetricDifferenceOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/symmetricDifferenceOperator/) instead.
+ * @deprecated since version 4.32. Use [symmetricDifferenceExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/symmetricDifferenceOperator/#symmetricDifferenceExecute) instead.
  * @param leftGeometry - One of the Geometry instances in the XOR operation.
  * @param rightGeometry - One of the Geometry instances in the XOR operation.
  * @returns The symmetric differences of the two geometries.
@@ -331,7 +331,7 @@ export function symmetricDifference(leftGeometry: GeometryUnion | GeometryUnion[
  * See [intersectLinesToPoints()](https://developers.arcgis.com/javascript/latest/references/core/geometry/geometryEngine/#intersectLinesToPoints) to find the point intersections
  * of two polylines.
  *
- * @deprecated since version 4.32. Use [intersectionOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/intersectionOperator/) instead.
+ * @deprecated since version 4.32. Use [intersectionExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/intersectionOperator/#intersectionExecute) instead.
  * @param geometry1 - The input geometry or array of geometries.
  * @param geometry2 - The geometry to intersect with geometry1.
  * @returns The intersections of the geometries.
@@ -346,7 +346,7 @@ export function intersect(geometry1: GeometryUnion | GeometryUnion[], geometry2:
 /**
  * All inputs must be of the same type of geometries and share one spatial reference.
  *
- * @deprecated since version 4.32. Use [unionOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/unionOperator/) instead.
+ * @deprecated since version 4.32. Use [unionExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/unionOperator/#unionExecute) instead.
  * @param geometries - An array of Geometries to union.
  * @returns The union of the geometries.
  * @example
@@ -359,7 +359,7 @@ export function union(geometries: GeometryUnion[]): GeometryUnion;
  * The offset operation creates a geometry that is a constant planar distance from an input
  * polyline or polygon. It is similar to buffering, but produces a one-sided result.
  *
- * @deprecated since version 4.32. Use [offsetOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/offsetOperator/) instead.
+ * @deprecated since version 4.32. Use [offsetExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/offsetOperator/#offsetExecute) instead.
  * @param geometry - The geometries to offset.
  * @param offsetDistance - The planar distance to offset from the input geometry. If offsetDistance > 0, then the offset
  * geometry is constructed to the right of the oriented input geometry, if offsetDistance = 0, then there is no
@@ -390,7 +390,7 @@ export function offset(geometry: GeometryUnion | GeometryUnion[], offsetDistance
  * with a geographic coordinate system other than WGS84 (wkid: 4326), use
  * [buffer()](https://developers.arcgis.com/javascript/latest/references/core/rest/geometryService/#buffer).
  *
- * @deprecated since version 4.32. Use [bufferOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/bufferOperator/) instead.
+ * @deprecated since version 4.32. Use [bufferExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/bufferOperator/#bufferExecute) instead.
  * @param geometry - The buffer input geometry.
  *        The `geometry` and `distance` parameters must be specified as either both arrays or
  *        both non-arrays. Never specify one as an array and the other a non-array.
@@ -430,7 +430,7 @@ export function buffer(geometry: GeometryUnion | GeometryUnion[], distance: numb
  * have a geographic coordinate system other than WGS84 (wkid: 4326), use
  * [buffer()](https://developers.arcgis.com/javascript/latest/references/core/rest/geometryService/#buffer).
  *
- * @deprecated since version 4.32. Use [geodesicBufferOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/geodesicBufferOperator/) instead.
+ * @deprecated since version 4.32. Use [geodesicBufferExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/geodesicBufferOperator/#geodesicBufferExecute) instead.
  * @param geometry - The buffer input geometry.
  *        The `geometry` and `distance` parameters must be specified as either both arrays or
  *        both non-arrays. Never specify one as an array and the other a non-array.
@@ -459,7 +459,7 @@ export function geodesicBuffer(geometry: GeometryUnion | GeometryUnion[], distan
 /**
  * Finds the coordinate of the geometry that is closest to the specified point.
  *
- * @deprecated since version 4.32. Use [proximityOperator's getNearestCoordinate()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/proximityOperator/#getNearestCoordinate) method instead.
+ * @deprecated since version 4.32. Use [proximityGetNearestCoordinate()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/proximityOperator/#proximityGetNearestCoordinate) method instead.
  * @param geometry - The geometry to consider.
  * @param inputPoint - The point used to search the nearest coordinate in the geometry.
  * @returns Returns an object containing the nearest coordinate.
@@ -469,7 +469,7 @@ export function nearestCoordinate(geometry: GeometryUnion, inputPoint: Point): N
 /**
  * Finds the vertex on the geometry nearest to the specified point.
  *
- * @deprecated since version 4.32. Use [proximityOperator's getNearestVertex()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/proximityOperator/#getNearestVertex) method instead.
+ * @deprecated since version 4.32. Use [proximityGetNearestVertex()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/proximityOperator/#proximityGetNearestVertex) method instead.
  * @param geometry - The geometry to consider.
  * @param inputPoint - The point used to search the nearest vertex in the geometry.
  * @returns Returns an object containing the nearest vertex.
@@ -486,7 +486,7 @@ export function nearestVertex(geometry: GeometryUnion, inputPoint: Point): Neare
  * Finds all vertices in the given distance from the specified point, sorted from the closest to the furthest and
  * returns them as an array of Objects.
  *
- * @deprecated since version 4.32. Use [proximityOperator's getNearestVertices()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/proximityOperator/#getNearestVertices) method instead.
+ * @deprecated since version 4.32. Use [proximityGetNearestVertices()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/proximityOperator/#proximityGetNearestVertices) method instead.
  * @param geometry - The geometry to consider.
  * @param inputPoint - The point from which to measure.
  * @param searchRadius - The distance to search from the inputPoint in the units of the view's spatial reference.
@@ -503,7 +503,7 @@ export function nearestVertices(geometry: GeometryUnion, inputPoint: Point, sear
  * Rotates a geometry counterclockwise by the specified number of degrees.
  * Rotation is around the centroid, or a given rotation point.
  *
- * @deprecated since version 4.32. Use [Transformation's rotate()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/support/Transformation/#rotate) method and the [affineTransformOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/affineTransformOperator/) instead.
+ * @deprecated since version 4.32. Use [Transformation's rotate()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/support/Transformation/#rotate) method and the [affineTransformExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/affineTransformOperator/#affineTransformExecute) instead.
  * @param geometry - The geometry to rotate.
  * @param angle - The rotation angle in degrees.
  * @param rotationOrigin - Point to rotate the geometry around. Defaults to the centroid of the geometry.
@@ -517,7 +517,7 @@ export function rotate(geometry: GeometryUnion, angle: number, rotationOrigin?:
 /**
  * Flips a geometry on the horizontal axis. Can optionally be flipped around a point.
  *
- * @deprecated since version 4.32. Use [Transformation's flipY()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/support/Transformation/#flipY) method and the [affineTransformOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/affineTransformOperator/) instead.
+ * @deprecated since version 4.32. Use [Transformation's flipY()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/support/Transformation/#flipY) method and the [affineTransformExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/affineTransformOperator/#affineTransformExecute) instead.
  * @param geometry - The input geometry to be flipped.
  * @param flipOrigin - Point to flip the geometry around. Defaults to the centroid of the geometry.
  * @returns The flipped geometry.
@@ -530,7 +530,7 @@ export function flipHorizontal(geometry: GeometryUnion, flipOrigin?: Point | nul
 /**
  * Flips a geometry on the vertical axis. Can optionally be flipped around a point.
  *
- * @deprecated since version 4.32. Use [Transformation's flipX()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/support/Transformation/#flipX) method and the [affineTransformOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/affineTransformOperator/) instead.
+ * @deprecated since version 4.32. Use [Transformation's flipX()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/support/Transformation/#flipX) method and the [affineTransformExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/affineTransformOperator/#affineTransformExecute) instead.
  * @param geometry - The input geometry to be flipped.
  * @param flipOrigin - Point to flip the geometry around. Defaults to the centroid of the geometry.
  * @returns The flipped geometry.
@@ -544,7 +544,7 @@ export function flipVertical(geometry: GeometryUnion, flipOrigin?: Point | null
  * Performs the generalize operation on the geometries in the cursor. Point and Multipoint geometries are left unchanged.
  * Envelope is converted to a Polygon and then generalized.
  *
- * @deprecated since version 4.32. Use [generalizeOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/generalizeOperator/) instead.
+ * @deprecated since version 4.32. Use [generalizeExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/generalizeOperator/#generalizeExecute) instead.
  * @param geometry - The input geometry to be generalized.
  * @param maxDeviation - The maximum allowed deviation from the generalized geometry to the original geometry.
  * @param removeDegenerateParts - When `true` the degenerate parts of the geometry will
@@ -561,7 +561,7 @@ export function generalize(geometry: GeometryUnion, maxDeviation: number, remove
 /**
  * Densify geometries by plotting points between existing vertices.
  *
- * @deprecated since version 4.32. Use [densifyOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/densifyOperator/) instead.
+ * @deprecated since version 4.32. Use [densifyExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/densifyOperator/#densifyExecute) instead.
  * @param geometry - The geometry to be densified.
  * @param maxSegmentLength - The maximum segment length allowed. Must be a positive value.
  * @param maxSegmentLengthUnit - Measurement unit for maxSegmentLength.
@@ -577,7 +577,7 @@ export function densify(geometry: GeometryUnion, maxSegmentLength: number, maxSe
 /**
  * Returns a geodetically densified version of the input geometry. Use this function to draw the line(s) of the geometry along great circles.
  *
- * @deprecated since version 4.32. Use [geodeticDensifyOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/geodeticDensifyOperator/) instead.
+ * @deprecated since version 4.32. Use [geodeticDensifyExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/geodeticDensifyOperator/#geodeticDensifyExecute) instead.
  * @param geometry - A polyline or polygon to densify.
  * @param maxSegmentLength - The maximum segment length allowed (in meters if a `maxSegmentLengthUnit` is not provided). This must be a positive value.
  * @param maxSegmentLengthUnit - Measurement unit for `maxSegmentLength`. If not provided, the unit will default to `meters`.
@@ -595,7 +595,7 @@ export function geodesicDensify(geometry: Polyline | Polygon, maxSegmentLength:
  * calculate areas using [geodesicArea()](https://developers.arcgis.com/javascript/latest/references/core/geometry/geometryEngine/#geodesicArea). If the input geometries have a projected coordinate system other than
  * Web Mercator, use planarArea() instead.
  *
- * @deprecated since version 4.32. Use [areaOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/areaOperator/) instead.
+ * @deprecated since version 4.32. Use [areaExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/areaOperator/#areaExecute) instead.
  * @param geometry - The input polygon.
  * @param unit - Measurement unit of the return value.
  * Defaults to the units of the input geometries.
@@ -614,7 +614,7 @@ export function planarArea(geometry: Polygon, unit?: number | AreaUnit): number;
  * calculate lengths using [geodesicLength()](https://developers.arcgis.com/javascript/latest/references/core/geometry/geometryEngine/#geodesicLength). If the input geometries have a projected coordinate system other than
  * Web Mercator, use planarLength() instead.
  *
- * @deprecated since version 4.32. Use [lengthOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/lengthOperator/) instead.
+ * @deprecated since version 4.32. Use [lengthExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/lengthOperator/#lengthExecute) instead.
  * @param geometry - The input geometry.
  * @param unit - Measurement unit of the return value.
  * Defaults to the units of the input geometries.
@@ -634,7 +634,7 @@ export function planarLength(geometry: GeometryUnion, unit?: number | LinearUnit
  *
  * This method only works with WGS84 (wkid: 4326) and [Web Mercator](https://developers.arcgis.com/javascript/latest/references/core/geometry/SpatialReference/#isWebMercator) spatial references.
  *
- * @deprecated since version 4.32. Use [geodeticAreaOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/geodeticAreaOperator/) instead.
+ * @deprecated since version 4.32. Use [geodeticAreaExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/geodeticAreaOperator/#geodeticAreaExecute) instead.
  * @param geometry - The input polygon.
  * @param unit - Measurement unit of the return value.
  * Defaults to the units of the input geometries.
@@ -654,7 +654,7 @@ export function geodesicArea(geometry: Polygon, unit?: number | AreaUnit): numbe
  *
  * This method only works with WGS84 (wkid: 4326) and [Web Mercator](https://developers.arcgis.com/javascript/latest/references/core/geometry/SpatialReference/#isWebMercator) spatial references.
  *
- * @deprecated since version 4.32. Use [geodeticLengthOperator](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/geodeticLengthOperator/) instead.
+ * @deprecated since version 4.32. Use [geodeticLengthExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/geodeticLengthOperator/#geodeticLengthExecute) instead.
  * @param geometry - The input geometry.
  * @param unit - Measurement unit of the return value.
  * Defaults to the units of the input geometry.
@@ -669,7 +669,7 @@ export function geodesicLength(geometry: GeometryUnion, unit?: number | LinearUn
  * Returns an array of points at the intersecting locations of two input polylines. Use
  * [intersect()](https://developers.arcgis.com/javascript/latest/references/core/geometry/geometryEngine/#intersect) for all other geometry intersect operations.
  *
- * @deprecated since version 4.32. Use [intersectionOperator's executeMany()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/intersectionOperator/#executeMany) method instead.
+ * @deprecated since version 4.32. Use [intersectionExecuteMany()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/intersectionOperator/#intersectionExecuteMany) method instead.
  * @param line1 - The first polyline to use in the intersect operation.
  * @param line2 - The second polyline to use in the intersect operation.
  * @returns The point intersections of the input polylines.

package/geometry/operators/affineTransformOperator.d.ts

@@ -13,6 +13,16 @@ import type { GeometryUnion, GeometryWithoutMeshUnion } from "../types.js";
  * @param transformation - The transformation to apply to the `geometry`.
  * @returns Returns the transformed geometry.
  */
+export function affineTransformExecute(geometry: GeometryUnion, transformation: Transformation): GeometryWithoutMeshUnion;
+
+/**
+ * Executes an affine transformation on the geometry.
+ *
+ * @deprecated since 5.2 use [affineTransformExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/affineTransformOperator/#affineTransformExecute)
+ * @param geometry - The geometry to be transformed.
+ * @param transformation - The transformation to apply to the `geometry`.
+ * @returns Returns the transformed geometry.
+ */
 export function execute(geometry: GeometryUnion, transformation: Transformation): GeometryWithoutMeshUnion;
 
 /**
@@ -23,10 +33,29 @@ export function execute(geometry: GeometryUnion, transformation: Transformation)
  * @param transformation - The transformation to apply to the `geometries`.
  * @returns Returns the transformed geometries.
  */
+export function affineTransformExecuteMany(geometries: GeometryUnion[], transformation: Transformation): GeometryWithoutMeshUnion[];
+
+/**
+ * Executes an affine transformation on multiple geometries.
+ *
+ * @deprecated since 5.2 use [affineTransformExecuteMany()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/affineTransformOperator/#affineTransformExecuteMany)
+ * @param geometries - The geometries to be transformed.
+ * All the geometries must have the same spatial reference.
+ * @param transformation - The transformation to apply to the `geometries`.
+ * @returns Returns the transformed geometries.
+ */
 export function executeMany(geometries: GeometryUnion[], transformation: Transformation): GeometryWithoutMeshUnion[];
 
 /**
  * Indicates if the operator supports input geometries that contain curves.
  * The value will always be `true`.
  */
-export const supportsCurves: boolean;
+export const affineTransformSupportsCurves: boolean;
+
+/**
+ * Indicates if the operator supports input geometries that contain curves.
+ * The value will always be `true`.
+ *
+ * @deprecated since 5.2 use [affineTransformSupportsCurves](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/affineTransformOperator/#affineTransformSupportsCurves)
+ */
+export const supportsCurves: ReturnType<typeof Boolean>;

package/geometry/operators/affineTransformOperator.js

@@ -1,2 +1,2 @@
 /* COPYRIGHT Esri - https://js.arcgis.com/5.2/LICENSE.txt */
-import{isSome as r}from"../../core/arrayUtils.js";import{supportsCurves as o,execute as t,executeMany as s}from"./gx/operatorAffineTransform.js";import{getSpatialReference as e,toGeometry as n,fromGeometry as a}from"./support/apiConverter.js";function p(r,o){const s=e(r);return n(t(a(r),o.transform),s)}function f(o,t){const p=o.map(a),f=e(o);return s(p,t.transform).map(r=>n(r,f)).filter(r)}const m=o();export{p as execute,f as executeMany,m as supportsCurves};
+import{isSome as e}from"../../core/arrayUtils.js";import{deprecatedFunction as r}from"../../core/deprecate.js";import o from"../../core/Logger.js";import{supportsCurves as t,execute as n,executeMany as a}from"./gx/operatorAffineTransform.js";import{getSpatialReference as s,toGeometry as f,fromGeometry as c}from"./support/apiConverter.js";function i(e,r){const o=s(e);return f(n(c(e),r.transform),o)}function m(e,t){return r(o.getLogger("esri.geometry.operators.affineTransformOperator"),"execute is deprecated. Use affineTransformExecute instead.",{replacement:"affineTransformExecute",warnOnce:!0}),i(e,t)}function p(r,o){const t=r.map(c),n=s(r);return a(t,o.transform).map(e=>f(e,n)).filter(e)}function u(e,t){return r(o.getLogger("esri.geometry.operators.affineTransformOperator"),"executeMany is deprecated. Use affineTransformExecuteMany instead.",{replacement:"affineTransformExecuteMany",warnOnce:!0}),p(e,t)}const g=t(),x=Boolean(g);export{i as affineTransformExecute,p as affineTransformExecuteMany,g as affineTransformSupportsCurves,m as execute,u as executeMany,x as supportsCurves};

package/geometry/operators/alphaShapeOperator.d.ts

@@ -10,7 +10,7 @@
 import type Polygon from "../Polygon.js";
 import type { GeometryUnion } from "../types.js";
 
-/** Object returned by the [executeMany()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/alphaShapeOperator/#executeMany) method. */
+/** Object returned by the [alphaShapeExecuteMany()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/alphaShapeOperator/#alphaShapeExecuteMany) method. */
 export interface ExecuteResult {
   /** The alpha shape polygon. */
   alphaShape: Polygon;
@@ -18,7 +18,7 @@ export interface ExecuteResult {
   calculatedAlpha: number;
 }
 
-export interface Options {
+export interface AlphaShapeOptions {
   /**
    * Indicates if the alpha shape polygons should be merged.
    * Set to `true` to merge the polygons into a single polygon.
@@ -26,6 +26,9 @@ export interface Options {
   merge?: boolean;
 }
 
+/** @deprecated since 5.2 use [AlphaShapeOptions](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/alphaShapeOperator/#AlphaShapeOptions) */
+export type Options = AlphaShapeOptions;
+
 /**
  * Calculates the alpha shape on the input geometry.
  *
@@ -38,7 +41,24 @@ export interface Options {
  * The result polygon is not guaranteed to be simple in the sense that it may contain very short segments.
  * @example
  * // Calculate the alpha shape of a multipoint geometry
- * const result = alphaShapeOperator.execute(geometry, 100);
+ * const result = alphaShapeExecute(geometry, 100);
+ */
+export function alphaShapeExecute(geometry: GeometryUnion, alpha: number): ExecuteResult;
+
+/**
+ * Calculates the alpha shape on the input geometry.
+ *
+ * @deprecated since 5.2 use [alphaShapeExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/alphaShapeOperator/#alphaShapeExecute)
+ * @param geometry - The input geometry.
+ * Only geometry vertices are used to compute the alpha shape.
+ * @param alpha - Controls the level of detail and concavity of the boundary.
+ * The value represents the square of the alpha radius for the alpha shape. Values of 0.0 or small positive numbers will yield an empty alpha shape.
+ * A negative number or NaN will lead to the alpha shape being computed with the minimal alpha value necessary to produce a connected result.
+ * @returns Returns an object containing a polygon of the alpha shape and the calculated alpha value.
+ * The result polygon is not guaranteed to be simple in the sense that it may contain very short segments.
+ * @example
+ * // Calculate the alpha shape of a multipoint geometry
+ * const result = alphaShapeExecute(geometry, 100);
  */
 export function execute(geometry: GeometryUnion, alpha: number): ExecuteResult;
 
@@ -55,10 +75,34 @@ export function execute(geometry: GeometryUnion, alpha: number): ExecuteResult;
  * @returns Returns the polygons of the alpha shapes or null.
  * The result polygons are not guaranteed to be simple in the sense that they may contain very short segments.
  */
-export function executeMany(geometries: GeometryUnion[], alpha: number, options?: Options): (Polygon | null | undefined)[];
+export function alphaShapeExecuteMany(geometries: GeometryUnion[], alpha: number, options?: AlphaShapeOptions): (Polygon | null | undefined)[];
+
+/**
+ * Calculates the alpha shape on a set of geometries with the option to aggregate the result.
+ *
+ * @deprecated since 5.2 use [alphaShapeExecuteMany()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/alphaShapeOperator/#alphaShapeExecuteMany)
+ * @param geometries - The input geometries.
+ * Only geometry vertices are used to compute the alpha shape.
+ * All the geometries must have the same spatial reference.
+ * @param alpha - Controls the level of detail and concavity of the boundary.
+ * The value represents the square of the alpha radius for the alpha shape. Zero or small positive values will yield an empty alpha shape.
+ * A negative number or NaN will lead to the alpha shape being computed with the minimal alpha value necessary to produce a connected result.
+ * @param options - Additional options.
+ * @returns Returns the polygons of the alpha shapes or null.
+ * The result polygons are not guaranteed to be simple in the sense that they may contain very short segments.
+ */
+export function executeMany(geometries: GeometryUnion[], alpha: number, options?: AlphaShapeOptions): (Polygon | null | undefined)[];
+
+/**
+ * Indicates if the operator supports input geometries that contain curves.
+ * The value will always be `false`.
+ */
+export const alphaShapeSupportsCurves: boolean;
 
 /**
  * Indicates if the operator supports input geometries that contain curves.
  * The value will always be `false`.
+ *
+ * @deprecated since 5.2 use [alphaShapeSupportsCurves](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/alphaShapeOperator/#alphaShapeSupportsCurves)
  */
-export const supportsCurves: boolean;
+export const supportsCurves: ReturnType<typeof Boolean>;

package/geometry/operators/alphaShapeOperator.js

@@ -1,2 +1,2 @@
 /* COPYRIGHT Esri - https://js.arcgis.com/5.2/LICENSE.txt */
-import{supportsCurves as e,execute as r,executeMany as t}from"./gx/operatorAlphaShape.js";import{getSpatialReference as a,toPolygon as p,fromGeometry as o}from"./support/apiConverter.js";function s(e,t){const s=a(e),n=[0];return{alphaShape:p(r(o(e),t,n),s),calculatedAlpha:n[0]}}function n(e,r,s={}){const{merge:n=!1}=s,u=e.map(o),c=a(e);return t(u,r,n).map(e=>p(e,c))}const u=e();export{s as execute,n as executeMany,u as supportsCurves};
+import{deprecatedFunction as e}from"../../core/deprecate.js";import a from"../../core/Logger.js";import{supportsCurves as r,execute as t,executeMany as p}from"./gx/operatorAlphaShape.js";import{getSpatialReference as o,toPolygon as n,fromGeometry as c}from"./support/apiConverter.js";function s(e,a){const r=o(e),p=[0];return{alphaShape:n(t(c(e),a,p),r),calculatedAlpha:p[0]}}function u(r,t){return e(a.getLogger("esri.geometry.operators.alphaShapeOperator"),"execute is deprecated. Use alphaShapeExecute instead.",{replacement:"alphaShapeExecute",warnOnce:!0}),s(r,t)}function h(e,a,r={}){const{merge:t=!1}=r,s=e.map(c),u=o(e);return p(s,a,t).map(e=>n(e,u))}function i(r,t,p={}){return e(a.getLogger("esri.geometry.operators.alphaShapeOperator"),"executeMany is deprecated. Use alphaShapeExecuteMany instead.",{replacement:"alphaShapeExecuteMany",warnOnce:!0}),h(r,t,p)}const m=r(),l=Boolean(m);export{s as alphaShapeExecute,h as alphaShapeExecuteMany,m as alphaShapeSupportsCurves,u as execute,i as executeMany,l as supportsCurves};

package/geometry/operators/areaOperator.d.ts

@@ -8,7 +8,7 @@
 import type { AreaUnit } from "../../core/units.js";
 import type { GeometryUnion } from "../types.js";
 
-export interface Options {
+export interface AreaOptions {
   /**
    * The area unit of the return value.
    * The default is the input geometry's spatial reference unit.
@@ -17,6 +17,9 @@ export interface Options {
   unit?: AreaUnit;
 }
 
+/** @deprecated since 5.2 use [AreaOptions](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/areaOperator/#AreaOptions) */
+export type Options = AreaOptions;
+
 /**
  * Calculates the planar area of the input geometry.
  *
@@ -25,9 +28,22 @@ export interface Options {
  * @returns Returns the planar area of the geometry.
  * @example
  * // Calculate the area of a polygon
- * const area = areaOperator.execute(polygon);
+ * const area = areaExecute(polygon);
  */
-export function execute(geometry: GeometryUnion, options?: Options): number;
+export function areaExecute(geometry: GeometryUnion, options?: AreaOptions): number;
+
+/**
+ * Calculates the planar area of the input geometry.
+ *
+ * @deprecated since 5.2 use [areaExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/areaOperator/#areaExecute)
+ * @param geometry - The geometry to calculate the area from.
+ * @param options - Additional options.
+ * @returns Returns the planar area of the geometry.
+ * @example
+ * // Calculate the area of a polygon
+ * const area = areaExecute(polygon);
+ */
+export function execute(geometry: GeometryUnion, options?: AreaOptions): number;
 
 /**
  * Indicates if the operator supports input geometries that contain curves.
@@ -35,4 +51,12 @@ export function execute(geometry: GeometryUnion, options?: Options): number;
  *
  * @default true
  */
-export const supportsCurves: boolean;
+export const areaSupportsCurves: boolean;
+
+/**
+ * Indicates if the operator supports input geometries that contain curves.
+ * The value will always be `true`.
+ *
+ * @deprecated since 5.2 use [areaSupportsCurves](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/areaOperator/#areaSupportsCurves)
+ */
+export const supportsCurves: ReturnType<typeof Boolean>;

package/geometry/operators/areaOperator.js

@@ -1,2 +1,2 @@
 /* COPYRIGHT Esri - https://js.arcgis.com/5.2/LICENSE.txt */
-import{areaUnitFromSpatialReference as r,convertUnit as t,getMetersPerUnitForSR as o}from"../../core/units.js";import{fromGeometry as e,getSpatialReference as n}from"./support/apiConverter.js";function a(a,i={}){const{unit:s}=i;let c=e(a).calculateArea2D();if(c&&s){const e=n(a);if(e.isGeographic)throw new Error("Unable to convert from an angular area unit to a linear area unit.");const i=r(e);i!==s&&(i?c=t(c,i,s):(c=Math.sqrt(c),c*=o(e),c**=2,c=t(c,"square-meters",s)))}return c}const i=!0;export{a as execute,i as supportsCurves};
+import{deprecatedFunction as e}from"../../core/deprecate.js";import r from"../../core/Logger.js";import{areaUnitFromSpatialReference as t,convertUnit as o,getMetersPerUnitForSR as a}from"../../core/units.js";import{fromGeometry as n,getSpatialReference as c}from"./support/apiConverter.js";function i(e,r={}){const{unit:i}=r;let s=n(e).calculateArea2D();if(s&&i){const r=c(e);if(r.isGeographic)throw new Error("Unable to convert from an angular area unit to a linear area unit.");const n=t(r);n!==i&&(n?s=o(s,n,i):(s=Math.sqrt(s),s*=a(r),s**=2,s=o(s,"square-meters",i)))}return s}function s(t,o={}){return e(r.getLogger("esri.geometry.operators.areaOperator"),"execute is deprecated. Use areaExecute instead.",{replacement:"areaExecute",warnOnce:!0}),i(t,o)}const u=!0,p=Boolean(u);export{i as areaExecute,u as areaSupportsCurves,s as execute,p as supportsCurves};

package/geometry/operators/autoCompleteOperator.d.ts

@@ -16,7 +16,22 @@ import type Polyline from "../Polyline.js";
  * Since only polygons that intersect polylines will be used, it may be necessary to prefilter the input.
  * @example
  * // Auto complete a set of polygons using polylines as boundaries
- * const result = autoCompleteOperator.execute(polygons, polylines);
+ * const result = autoCompleteExecute(polygons, polylines);
+ */
+export function autoCompleteExecute(polygons: Polygon[], polylines: Polyline[]): Polygon[];
+
+/**
+ * Fills the gaps between polygons using the polylines as additional boundaries.
+ *
+ * @deprecated since 5.2 use [autoCompleteExecute()](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/autoCompleteOperator/#autoCompleteExecute)
+ * @param polygons - The polygons to fill.
+ * @param polylines - The polylines to use as boundaries.
+ * @returns Returns the new polygons that were created in the closed empty areas bounded by some of the edges of `polygons` and `polylines`.
+ * The newly created polygons do not overlap any existing `polygons` or `polylines`, and the boundary of a new polygon must contain at least one edge from `polylines`.
+ * Since only polygons that intersect polylines will be used, it may be necessary to prefilter the input.
+ * @example
+ * // Auto complete a set of polygons using polylines as boundaries
+ * const result = autoCompleteExecute(polygons, polylines);
  */
 export function execute(polygons: Polygon[], polylines: Polyline[]): Polygon[];
 
@@ -24,4 +39,12 @@ export function execute(polygons: Polygon[], polylines: Polyline[]): Polygon[];
  * Indicates if the operator supports input geometries that contain curves.
  * The value will always be `true`.
  */
-export const supportsCurves: boolean;
+export const autoCompleteSupportsCurves: boolean;
+
+/**
+ * Indicates if the operator supports input geometries that contain curves.
+ * The value will always be `true`.
+ *
+ * @deprecated since 5.2 use [autoCompleteSupportsCurves](https://developers.arcgis.com/javascript/latest/references/core/geometry/operators/autoCompleteOperator/#autoCompleteSupportsCurves)
+ */
+export const supportsCurves: ReturnType<typeof Boolean>;

package/geometry/operators/autoCompleteOperator.js

@@ -1,2 +1,2 @@
 /* COPYRIGHT Esri - https://js.arcgis.com/5.2/LICENSE.txt */
-import{isSome as r}from"../../core/arrayUtils.js";import{supportsCurves as o,execute as t}from"./gx/operatorAutoComplete.js";import{getSpatialReference as p,fromSpatialReference as e,fromPolyline as s,fromPolygon as m,toPolygon as a}from"./support/apiConverter.js";function i(o,i){const u=p(o);return t(o.map(m),i.map(s),e(u)).map(r=>a(r,u)).filter(r)}const u=o();export{i as execute,u as supportsCurves};
+import{isSome as e}from"../../core/arrayUtils.js";import{deprecatedFunction as r}from"../../core/deprecate.js";import o from"../../core/Logger.js";import{supportsCurves as t,execute as p}from"./gx/operatorAutoComplete.js";import{getSpatialReference as a,fromSpatialReference as m,fromPolyline as s,fromPolygon as c,toPolygon as u}from"./support/apiConverter.js";function n(r,o){const t=a(r);return p(r.map(c),o.map(s),m(t)).map(e=>u(e,t)).filter(e)}function i(e,t){return r(o.getLogger("esri.geometry.operators.autoCompleteOperator"),"execute is deprecated. Use autoCompleteExecute instead.",{replacement:"autoCompleteExecute",warnOnce:!0}),n(e,t)}const f=t(),l=Boolean(f);export{n as autoCompleteExecute,f as autoCompleteSupportsCurves,i as execute,l as supportsCurves};