@arcgis/core 5.1.0-next.106 → 5.1.0-next.108

package/assets/esri/widgets/Sketch/t9n/Sketch_hu.json

@@ -1 +1 @@
-{"widgetLabel":"Vázlat","undo":"Visszavonás","redo":"Újra","draw":{"point":"Pont rajzolása","polygon":"Sokszög rajzolása","polyline":"Polyline rajzolása","circle":"Kör rajzolása","rectangle":"Téglalap rajzolása","multipoint":"Multipoint rajzolása","mesh":"Háló rajzolása","freehandPolyline":"Polyline rajzolása (szabadkézi)","freehandPolygon":"Polygon rajzolása (szabadkézi)","streamPolyline":"Polyline rajzolása (adatfolyam)","streamPolygon":"Polygon rajzolása (adatfolyam)","text":"Szöveg hozzáadása"},"digitizers":{"root-point":"Pont rajzolása","root-polygon":"Sokszög rajzolása","root-polyline":"Polyline rajzolása","root-circle":"Kör vagy ellipszis rajzolása","root-rectangle":"Téglalap vagy négyzet rajzolása","root-multipoint":"Multipoint rajzolása","root-mesh":"Háló rajzolása","root-text":"Szöveg hozzáadása","leaf-point":"Pont","leaf-distance-distance":"Távolság-távolság (kör-kör metszéspont)","leaf-direction-distance":"Irány-távolság (kör-vonal metszéspont)","leaf-direction-direction":"Irány-irány (vonal-vonal metszéspont)","leaf-point-segment":"Vonalszegmens","leaf-autocomplete":"Automatikus kiegészítés","leaf-right-angle":"Derékszögszegmens","leaf-freehand":"Szabadkézi szegmens","leaf-stream":"Adatfolyamszegmens","leaf-tangent-arc":"Érintőgörbe-szegmens","leaf-circular-arc":"Ívszegmens","leaf-endpoint-arc":"Végpontívszegmens","leaf-bezier":"Bezier-görbe-szegmens"},"partActions":{"completePart":"Rész befejezése","completeInput":"Aktuális bevitel befejezése","releaseManipulator":"Kurzorkövetés leállítása","captureManipulator":"Kurzor követése","completeDrawing":"Befejezés","cancelDrawing":"Mégse"},"keyboardFeedback":{"tooltip":"Billentyűzetmozgás sebessége: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Speciális billentyűparancsok engedélyezése"},"settings":{"toolOptionsHeading":"í_Drawing options________________ő","freehandSnappingEnabledTitle":"í_Freehand snaps when not streaming__________________ő","freehandSnappingEnabledDescription":"í_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________ő.","bezierEnableSplineBehaviorTitle":"í_Bezier draws splines_____________________ő","bezierEnableSplineBehaviorDescription":"í_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________ő."},"selectedCount":"Kiválasztás: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"í_Processing_____________________ő","finalizingDrawingHint":"í_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________ő.","finalizingDrawingCompleteHint":"í_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________ő.","deleteFeature":"Vektoros elem törlése","deleteFeatures":"Vektoros elemek törlése","selectFeature":"Vektoros elem kijelölése","duplicateFeature":"Vektoros elem másolása","duplicateFeatures":"Vektoros elemek másolása","finalizingDrawingTitle":"í_Processing geometry_______________________ő...","finalizingDrawingCompleteTitle":"í_Geometry required optimization_______________________________ő","simplificationDismiss":"í_Dismiss_______________ő"}
+{"widgetLabel":"Vázlat","undo":"Visszavonás","redo":"Újra","draw":{"point":"Pont rajzolása","polygon":"Sokszög rajzolása","polyline":"Polyline rajzolása","circle":"Kör rajzolása","rectangle":"Téglalap rajzolása","multipoint":"Multipoint rajzolása","mesh":"Háló rajzolása","freehandPolyline":"Polyline rajzolása (szabadkézi)","freehandPolygon":"Polygon rajzolása (szabadkézi)","streamPolyline":"Polyline rajzolása (adatfolyam)","streamPolygon":"Polygon rajzolása (adatfolyam)","text":"Szöveg hozzáadása"},"digitizers":{"root-point":"Pont rajzolása","root-polygon":"Sokszög rajzolása","root-polyline":"Polyline rajzolása","root-circle":"Kör vagy ellipszis rajzolása","root-rectangle":"Téglalap vagy négyzet rajzolása","root-multipoint":"Multipoint rajzolása","root-mesh":"Háló rajzolása","root-text":"Szöveg hozzáadása","leaf-point":"Pont","leaf-distance-distance":"Távolság-távolság (kör-kör metszéspont)","leaf-direction-distance":"Irány-távolság (kör-vonal metszéspont)","leaf-direction-direction":"Irány-irány (vonal-vonal metszéspont)","leaf-point-segment":"Vonalszegmens","leaf-autocomplete":"Automatikus kiegészítés","leaf-right-angle":"Derékszögszegmens","leaf-freehand":"Szabadkézi szegmens","leaf-stream":"Adatfolyamszegmens","leaf-tangent-arc":"Érintőgörbe-szegmens","leaf-circular-arc":"Ívszegmens","leaf-endpoint-arc":"Végpontívszegmens","leaf-bezier":"Bezier-görbe-szegmens"},"partActions":{"completePart":"Rész befejezése","completeInput":"Aktuális bevitel befejezése","releaseManipulator":"Kurzorkövetés leállítása","captureManipulator":"Kurzor követése","completeDrawing":"Befejezés","cancelDrawing":"Mégse"},"keyboardFeedback":{"tooltip":"Billentyűzetmozgás sebessége: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Speciális billentyűparancsok engedélyezése"},"settings":{"toolOptionsHeading":"Rajzolási beállítások","freehandSnappingEnabledTitle":"A szabadkézi mód hozzáillesztést végez, ha nincs folyamatos adatátvitel","freehandSnappingEnabledDescription":"Ha engedélyezi, a Szabadkézi szegmens eszköz hozzáillesztést alkalmaz, amikor nincs aktív húzás.","bezierEnableSplineBehaviorTitle":"A Bezier spline-okat rajzol","bezierEnableSplineBehaviorDescription":"Ha engedélyezve van, a Bezier-szegmens eszköz az előző szegmens alapján következteti ki minden következő szegmens első referenciapontját."},"selectedCount":"Kiválasztás: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Feldolgozás","finalizingDrawingHint":"A rendszer a teljesítmény és a kompatibilitás érdekében egyszerűsíti az Ön rajzát. A gyorsabb feldolgozás érdekében kerülje az önmagukat metsző és átfedő szegmenseket.","finalizingDrawingCompleteHint":"A korábban létrehozott rajz esetében a teljesítmény és a kompatibilitás érdekében egyszerűsítésre volt szükség. Ha a jövőben el szeretné kerülni ezt a lépést, ne rajzoljon átfedő és önmagukat metsző szakaszokat tartalmazó polygonokat.","deleteFeature":"Vektoros elem törlése","deleteFeatures":"Vektoros elemek törlése","selectFeature":"Vektoros elem kijelölése","duplicateFeature":"Vektoros elem másolása","duplicateFeatures":"Vektoros elemek másolása","finalizingDrawingTitle":"Geometria feldolgozása..."}

package/assets/esri/widgets/Sketch/t9n/Sketch_id.json

@@ -1 +1 @@
-{"widgetLabel":"Sketsa","undo":"Batalkan","redo":"Ulangi","draw":{"point":"Gambar titik","polygon":"Gambar poligon","polyline":"Gambar polyline","circle":"Gambar lingkaran","rectangle":"Gambar persegi panjang","multipoint":"Gambar multi-titik","mesh":"Gambar mesh","freehandPolyline":"Gambar polyline (bebas)","freehandPolygon":"Gambar poligon (bebas)","streamPolyline":"Gambar polyline (aliran)","streamPolygon":"Gambar poligon (aliran)","text":"Tambahkan teks"},"digitizers":{"root-point":"Gambar titik","root-polygon":"Gambar poligon","root-polyline":"Gambar polyline","root-circle":"Gambar lingkaran atau elips","root-rectangle":"Gambar persegi panjang atau persegi","root-multipoint":"Gambar multi-titik","root-mesh":"Gambar mesh","root-text":"Tambahkan teks","leaf-point":"Titik","leaf-distance-distance":"Jarak-jarak (perpotongan lingkaran-lingkaran)","leaf-direction-distance":"Arah-jarak (perpotongan lingkaran-garis)","leaf-direction-direction":"Jarak-jarak (perpotongan garis-garis)","leaf-point-segment":"Segmen garis","leaf-autocomplete":"Selesaikan otomatis","leaf-right-angle":"Segmen sudut kanan","leaf-freehand":"Segmen bebas","leaf-stream":"Segmen aliran","leaf-tangent-arc":"Segmen kurva singgung","leaf-circular-arc":"Segmen busur","leaf-endpoint-arc":"Segmen busur titik akhir","leaf-bezier":"Segmen kurva Bezier"},"partActions":{"completePart":"Selesaikan bagian","completeInput":"Selesaikan input saat ini","releaseManipulator":"Hentikan mengikuti kursor","captureManipulator":"Ikuti kursor","completeDrawing":"Selesai","cancelDrawing":"Batalkan"},"keyboardFeedback":{"tooltip":"Kecepatan pergerakan keyboard: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Aktifkan pintasan keyboars lanjutan"},"settings":{"toolOptionsHeading":"ng_Drawing options________________ny","freehandSnappingEnabledTitle":"ng_Freehand snaps when not streaming__________________ny","freehandSnappingEnabledDescription":"ng_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________ny.","bezierEnableSplineBehaviorTitle":"ng_Bezier draws splines_____________________ny","bezierEnableSplineBehaviorDescription":"ng_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________ny."},"selectedCount":"Pilihan: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"ng_Processing_____________________ny","finalizingDrawingHint":"ng_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________ny.","finalizingDrawingCompleteHint":"ng_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________ny.","deleteFeature":"Hapus fitur","deleteFeatures":"Hapus fitur","selectFeature":"Pilih fitur","duplicateFeature":"Duplikat fitur","duplicateFeatures":"Duplikat fitur","finalizingDrawingTitle":"ng_Processing geometry_______________________ny...","finalizingDrawingCompleteTitle":"ng_Geometry required optimization_______________________________ny","simplificationDismiss":"ng_Dismiss_______________ny"}
+{"widgetLabel":"Sketsa","undo":"Batalkan","redo":"Ulangi","draw":{"point":"Gambar titik","polygon":"Gambar poligon","polyline":"Gambar polyline","circle":"Gambar lingkaran","rectangle":"Gambar persegi panjang","multipoint":"Gambar multi-titik","mesh":"Gambar mesh","freehandPolyline":"Gambar polyline (bebas)","freehandPolygon":"Gambar poligon (bebas)","streamPolyline":"Gambar polyline (aliran)","streamPolygon":"Gambar poligon (aliran)","text":"Tambahkan teks"},"digitizers":{"root-point":"Gambar titik","root-polygon":"Gambar poligon","root-polyline":"Gambar polyline","root-circle":"Gambar lingkaran atau elips","root-rectangle":"Gambar persegi panjang atau persegi","root-multipoint":"Gambar multi-titik","root-mesh":"Gambar mesh","root-text":"Tambahkan teks","leaf-point":"Titik","leaf-distance-distance":"Jarak-jarak (perpotongan lingkaran-lingkaran)","leaf-direction-distance":"Arah-jarak (perpotongan lingkaran-garis)","leaf-direction-direction":"Jarak-jarak (perpotongan garis-garis)","leaf-point-segment":"Segmen garis","leaf-autocomplete":"Selesaikan otomatis","leaf-right-angle":"Segmen sudut kanan","leaf-freehand":"Segmen bebas","leaf-stream":"Segmen aliran","leaf-tangent-arc":"Segmen kurva singgung","leaf-circular-arc":"Segmen busur","leaf-endpoint-arc":"Segmen busur titik akhir","leaf-bezier":"Segmen kurva Bezier"},"partActions":{"completePart":"Selesaikan bagian","completeInput":"Selesaikan input saat ini","releaseManipulator":"Hentikan mengikuti kursor","captureManipulator":"Ikuti kursor","completeDrawing":"Selesai","cancelDrawing":"Batalkan"},"keyboardFeedback":{"tooltip":"Kecepatan pergerakan keyboard: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Aktifkan pintasan keyboars lanjutan"},"settings":{"toolOptionsHeading":"Opsi menggambar","freehandSnappingEnabledTitle":"Snap bebas saat tidak sedang streaming","freehandSnappingEnabledDescription":"Jika diaktifkan, alat segmen bebas akan menerapkan fitur penyesuaian posisi saat pengguna tidak sedang menyeret secara aktif.","bezierEnableSplineBehaviorTitle":"Menggambar spline bezier","bezierEnableSplineBehaviorDescription":"Jika diaktifkan, alat segmen Bezier akan menentukan titik kontrol pertama dari setiap segmen berikutnya berdasarkan segmen sebelumnya."},"selectedCount":"Pilihan: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Memproses","finalizingDrawingHint":"Gambar Anda sedang disederhanakan untuk meningkatkan kinerja dan kompatibilitas. Agar pemrosesan lebih cepat, hindari yang saling berpotongan dan tumpang tindih.","finalizingDrawingCompleteHint":"Gambar yang dibuat sebelumnya harus disederhanakan untuk meningkatkan kinerja dan kompatibilitas. Untuk menghindari langkah ini di masa mendatang, jangan gambar poligon dengan bagian yang tumpang tindih dan saling berpotongan.","deleteFeature":"Hapus fitur","deleteFeatures":"Hapus fitur","selectFeature":"Pilih fitur","duplicateFeature":"Duplikat fitur","duplicateFeatures":"Duplikat fitur","finalizingDrawingTitle":"Memproses geometri..."}

package/assets/esri/widgets/Sketch/t9n/Sketch_it.json

@@ -1 +1 @@
-{"widgetLabel":"Schizzo","undo":"Annulla","redo":"Ripeti","draw":{"point":"Disegnare un punto","polygon":"Disegna un poligono","polyline":"Disegna una polilinea","circle":"Disegna un cerchio","rectangle":"Disegna un rettangolo","multipoint":"Disegna un multipoint","mesh":"Disegna una mesh","freehandPolyline":"Disegna una polilinea (mano libera)","freehandPolygon":"Disegna un poligono (mano libera)","streamPolyline":"Disegna una polilinea (flusso)","streamPolygon":"Disegna un poligono (flusso)","text":"Aggiungi testo"},"digitizers":{"root-point":"Disegnare un punto","root-polygon":"Disegna un poligono","root-polyline":"Disegna una polilinea","root-circle":"Disegna una circonferenza o un'ellisse","root-rectangle":"Disegna un rettangolo o un quadrato","root-multipoint":"Disegna un multipoint","root-mesh":"Disegna una mesh","root-text":"Aggiungi testo","leaf-point":"Punto","leaf-distance-distance":"Distanza-distanza (intersezione circonferenza-circonferenza)","leaf-direction-distance":"Direzione-distanza (intersezione circonferenza-linea)","leaf-direction-direction":"Direzione-direzione (intersezione linea-linea)","leaf-point-segment":"Segmento linea","leaf-autocomplete":"Completamento automatico","leaf-right-angle":"Segmento angolo retto","leaf-freehand":"Segmento a mano libera","leaf-stream":"Segmento flusso","leaf-tangent-arc":"Segmento curva tangente","leaf-circular-arc":"Segmento arco","leaf-endpoint-arc":"Segmento arco endpoint","leaf-bezier":"Segmento curva di Bezier"},"partActions":{"completePart":"Termina parte","completeInput":"Termina input corrente","releaseManipulator":"Arresta inseguimento cursore","captureManipulator":"Segui cursore","completeDrawing":"Fine","cancelDrawing":"Annulla"},"keyboardFeedback":{"tooltip":"Velocità di spostamento tastiera: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Abilita tasti di scelta rapida tastiera avanzata"},"settings":{"toolOptionsHeading":"é_Drawing options________________È","freehandSnappingEnabledTitle":"é_Freehand snaps when not streaming__________________È","freehandSnappingEnabledDescription":"é_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________È.","bezierEnableSplineBehaviorTitle":"é_Bezier draws splines_____________________È","bezierEnableSplineBehaviorDescription":"é_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________È."},"selectedCount":"Selezione: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"é_Processing_____________________È","finalizingDrawingHint":"é_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________È.","finalizingDrawingCompleteHint":"é_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________È.","deleteFeature":"Elimina feature","deleteFeatures":"Eliminare le feature","selectFeature":"Seleziona feature","duplicateFeature":"Duplica feature","duplicateFeatures":"Duplica feature","finalizingDrawingTitle":"é_Processing geometry_______________________È...","finalizingDrawingCompleteTitle":"é_Geometry required optimization_______________________________È","simplificationDismiss":"é_Dismiss_______________È"}
+{"widgetLabel":"Schizzo","undo":"Annulla","redo":"Ripeti","draw":{"point":"Disegnare un punto","polygon":"Disegna un poligono","polyline":"Disegna una polilinea","circle":"Disegna un cerchio","rectangle":"Disegna un rettangolo","multipoint":"Disegna un multipoint","mesh":"Disegna una mesh","freehandPolyline":"Disegna una polilinea (mano libera)","freehandPolygon":"Disegna un poligono (mano libera)","streamPolyline":"Disegna una polilinea (flusso)","streamPolygon":"Disegna un poligono (flusso)","text":"Aggiungi testo"},"digitizers":{"root-point":"Disegnare un punto","root-polygon":"Disegna un poligono","root-polyline":"Disegna una polilinea","root-circle":"Disegna una circonferenza o un'ellisse","root-rectangle":"Disegna un rettangolo o un quadrato","root-multipoint":"Disegna un multipoint","root-mesh":"Disegna una mesh","root-text":"Aggiungi testo","leaf-point":"Punto","leaf-distance-distance":"Distanza-distanza (intersezione circonferenza-circonferenza)","leaf-direction-distance":"Direzione-distanza (intersezione circonferenza-linea)","leaf-direction-direction":"Direzione-direzione (intersezione linea-linea)","leaf-point-segment":"Segmento linea","leaf-autocomplete":"Completamento automatico","leaf-right-angle":"Segmento angolo retto","leaf-freehand":"Segmento a mano libera","leaf-stream":"Segmento flusso","leaf-tangent-arc":"Segmento curva tangente","leaf-circular-arc":"Segmento arco","leaf-endpoint-arc":"Segmento arco endpoint","leaf-bezier":"Segmento curva di Bezier"},"partActions":{"completePart":"Termina parte","completeInput":"Termina input corrente","releaseManipulator":"Arresta inseguimento cursore","captureManipulator":"Segui cursore","completeDrawing":"Fine","cancelDrawing":"Annulla"},"keyboardFeedback":{"tooltip":"Velocità di spostamento tastiera: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Abilita tasti di scelta rapida tastiera avanzata"},"settings":{"toolOptionsHeading":"Opzioni di disegno","freehandSnappingEnabledTitle":"Aggancio a mano libera quando non in streaming","freehandSnappingEnabledDescription":"Se abilitato, lo strumento Segmento a mano libera applica l'aggancio automatico anche quando non si sta trascinando attivamente.","bezierEnableSplineBehaviorTitle":"Bezier disegna spline","bezierEnableSplineBehaviorDescription":"Se abilitato, lo strumento Segmento Bezier deduce il primo punto di controllo di ogni segmento successivo dal segmento precedente."},"selectedCount":"Selezione: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Elaborazione in corso","finalizingDrawingHint":"Il disegno viene semplificato per ottimizzare le prestazioni e la compatibilità. Per velocizzare l'elaborazione, evitare segmenti sovrapposti e autointersecanti.","finalizingDrawingCompleteHint":"Il disegno creato in precedenza ha richiesto delle semplificazioni per ottimizzare le prestazioni e la compatibilità. Per evitare questo passaggio in futuro, non disegnare i poligoni con sezioni autointersecanti e sovrapposte.","deleteFeature":"Elimina feature","deleteFeatures":"Eliminare le feature","selectFeature":"Seleziona feature","duplicateFeature":"Duplica feature","duplicateFeatures":"Duplica feature","finalizingDrawingTitle":"Elaborazione geometria in corso..."}

package/assets/esri/widgets/Sketch/t9n/Sketch_ja.json

@@ -1 +1 @@
-{"widgetLabel":"スケッチ","undo":"元に戻す","redo":"やり直し","draw":{"point":"ポイントの描画","polygon":"ポリゴンの描画","polyline":"ポリラインの描画","circle":"円の描画","rectangle":"長方形の描画","multipoint":"マルチポイントの描画","mesh":"メッシュの描画","freehandPolyline":"ポリラインの描画 (フリーハンド)","freehandPolygon":"ポリゴンの描画 (フリーハンド)","streamPolyline":"ポリライン (河川) の描画","streamPolygon":"ポリゴン (河川) の描画","text":"テキストの追加"},"digitizers":{"root-point":"ポイントの描画","root-polygon":"ポリゴンの描画","root-polyline":"ポリラインの描画","root-circle":"円または楕円の描画","root-rectangle":"四角形または正方形の描画","root-multipoint":"マルチポイントの描画","root-mesh":"メッシュの描画","root-text":"テキストの追加","leaf-point":"ポイント","leaf-distance-distance":"距離-距離 (円-円の交点)","leaf-direction-distance":"距離-距離 (円-ラインの交点)","leaf-direction-direction":"距離-距離 (ライン-ラインの交点)","leaf-point-segment":"ライン セグメント","leaf-autocomplete":"自動入力","leaf-right-angle":"直角セグメント","leaf-freehand":"フリーハンド セグメント","leaf-stream":"河川セグメント","leaf-tangent-arc":"正接円弧セグメント","leaf-circular-arc":"円弧セグメント","leaf-endpoint-arc":"端点円弧セグメント","leaf-bezier":"ベジェ曲線セグメント"},"partActions":{"completePart":"パート編集終了","completeInput":"現在の入力を終了","releaseManipulator":"カーソル追従の停止","captureManipulator":"カーソルに追従","completeDrawing":"完了","cancelDrawing":"キャンセル"},"keyboardFeedback":{"tooltip":"キーボードの移動速度: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"高度なキーボード ショートカットの有効化"},"settings":{"toolOptionsHeading":"須_Drawing options________________鷗","freehandSnappingEnabledTitle":"須_Freehand snaps when not streaming__________________鷗","freehandSnappingEnabledDescription":"須_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________鷗.","bezierEnableSplineBehaviorTitle":"須_Bezier draws splines_____________________鷗","bezierEnableSplineBehaviorDescription":"須_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________鷗."},"selectedCount":"選択: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"須_Processing_____________________鷗","finalizingDrawingHint":"須_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________鷗.","finalizingDrawingCompleteHint":"須_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________鷗.","deleteFeature":"フィーチャの削除","deleteFeatures":"フィーチャの削除","selectFeature":"フィーチャの選択","duplicateFeature":"フィーチャの複製","duplicateFeatures":"フィーチャの複製","finalizingDrawingTitle":"須_Processing geometry_______________________鷗...","finalizingDrawingCompleteTitle":"須_Geometry required optimization_______________________________鷗","simplificationDismiss":"須_Dismiss_______________鷗"}
+{"widgetLabel":"スケッチ","undo":"元に戻す","redo":"やり直し","draw":{"point":"ポイントの描画","polygon":"ポリゴンの描画","polyline":"ポリラインの描画","circle":"円の描画","rectangle":"長方形の描画","multipoint":"マルチポイントの描画","mesh":"メッシュの描画","freehandPolyline":"ポリラインの描画 (フリーハンド)","freehandPolygon":"ポリゴンの描画 (フリーハンド)","streamPolyline":"ポリライン (河川) の描画","streamPolygon":"ポリゴン (河川) の描画","text":"テキストの追加"},"digitizers":{"root-point":"ポイントの描画","root-polygon":"ポリゴンの描画","root-polyline":"ポリラインの描画","root-circle":"円または楕円の描画","root-rectangle":"四角形または正方形の描画","root-multipoint":"マルチポイントの描画","root-mesh":"メッシュの描画","root-text":"テキストの追加","leaf-point":"ポイント","leaf-distance-distance":"距離-距離 (円-円の交点)","leaf-direction-distance":"距離-距離 (円-ラインの交点)","leaf-direction-direction":"距離-距離 (ライン-ラインの交点)","leaf-point-segment":"ライン セグメント","leaf-autocomplete":"自動入力","leaf-right-angle":"直角セグメント","leaf-freehand":"フリーハンド セグメント","leaf-stream":"河川セグメント","leaf-tangent-arc":"正接円弧セグメント","leaf-circular-arc":"円弧セグメント","leaf-endpoint-arc":"端点円弧セグメント","leaf-bezier":"ベジェ曲線セグメント"},"partActions":{"completePart":"パート編集終了","completeInput":"現在の入力を終了","releaseManipulator":"カーソル追従の停止","captureManipulator":"カーソルに追従","completeDrawing":"完了","cancelDrawing":"キャンセル"},"keyboardFeedback":{"tooltip":"キーボードの移動速度: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"高度なキーボード ショートカットの有効化"},"settings":{"toolOptionsHeading":"描画オプション","freehandSnappingEnabledTitle":"ストリーミングしていないときはフリーハンドをスナップ","freehandSnappingEnabledDescription":"有効にすると、フリーハンド セグメント ツールは、アクティブにドラッグ操作を行っていない間にスナップを適用します。","bezierEnableSplineBehaviorTitle":"ベジェ曲線はスプラインを描画","bezierEnableSplineBehaviorDescription":"有効にすると、ベジェ セグメント ツールは、後続の各セグメントの最初のコントロール ポイントを、前のセグメントから推測します。"},"selectedCount":"選択: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"処理","finalizingDrawingHint":"パフォーマンスと互換性の観点から、ドローイングは簡素化されています。 処理を高速化するため、自己交差セグメントおよび重複セグメントは回避してください。","finalizingDrawingCompleteHint":"先ほど作成したドローイングは、パフォーマンスと互換性の観点から簡素化する必要があります。 今後、このステップを回避するためには、重複セクションや自己交差セクションを含むポリゴンは描画しないでください。","deleteFeature":"フィーチャの削除","deleteFeatures":"フィーチャの削除","selectFeature":"フィーチャの選択","duplicateFeature":"フィーチャの複製","duplicateFeatures":"フィーチャの複製","finalizingDrawingTitle":"ジオメトリーを処理中です..."}

package/assets/esri/widgets/Sketch/t9n/Sketch_ko.json

@@ -1 +1 @@
-{"widgetLabel":"스케치","undo":"실행 취소","redo":"다시 실행","draw":{"point":"포인트 그리기","polygon":"폴리곤 그리기","polyline":"폴리라인 그리기","circle":"원 그리기","rectangle":"사각형 그리기","multipoint":"멀티포인트 그리기","mesh":"메시 그리기","freehandPolyline":"폴리라인 그리기(자유곡선)","freehandPolygon":"폴리곤 그리기(자유곡선)","streamPolyline":"폴리라인 그리기(하천)","streamPolygon":"폴리곤 그리기(하천)","text":"텍스트 추가"},"digitizers":{"root-point":"포인트 그리기","root-polygon":"폴리곤 그리기","root-polyline":"폴리라인 그리기","root-circle":"타원 또는 원 그리기","root-rectangle":"직사각형 또는 정사각형 그리기","root-multipoint":"멀티포인트 그리기","root-mesh":"메시 그리기","root-text":"텍스트 추가","leaf-point":"포인트","leaf-distance-distance":"거리-거리(원-원 교차)","leaf-direction-distance":"방향-거리(원-선 교차)","leaf-direction-direction":"방향-방향(선-선 교차)","leaf-point-segment":"라인 세그먼트","leaf-autocomplete":"자동 완성","leaf-right-angle":"직각 세그먼트","leaf-freehand":"자유곡선 세그먼트","leaf-stream":"하천 세그먼트","leaf-tangent-arc":"탄젠트 곡선 세그먼트","leaf-circular-arc":"호 세그먼트","leaf-endpoint-arc":"끝점 호 세그먼트","leaf-bezier":"베지어 곡선 세그먼트"},"partActions":{"completePart":"파트 완료","completeInput":"현재 입력 완료","releaseManipulator":"커서 추적 중지","captureManipulator":"커서 추적","completeDrawing":"종료","cancelDrawing":"취소"},"keyboardFeedback":{"tooltip":"키보드 이동 속도: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip}(단축키)"},"advancedSettings":{"keyboardInput":"고급 키보드 단축키 사용"},"settings":{"toolOptionsHeading":"한_Drawing options________________빠","freehandSnappingEnabledTitle":"한_Freehand snaps when not streaming__________________빠","freehandSnappingEnabledDescription":"한_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________빠.","bezierEnableSplineBehaviorTitle":"한_Bezier draws splines_____________________빠","bezierEnableSplineBehaviorDescription":"한_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________빠."},"selectedCount":"선택: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"한_Processing_____________________빠","finalizingDrawingHint":"한_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________빠.","finalizingDrawingCompleteHint":"한_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________빠.","deleteFeature":"피처 삭제","deleteFeatures":"피처 삭제","selectFeature":"피처 선택","duplicateFeature":"피처 복제","duplicateFeatures":"여러 피처 복제","finalizingDrawingTitle":"한_Processing geometry_______________________빠...","finalizingDrawingCompleteTitle":"한_Geometry required optimization_______________________________빠","simplificationDismiss":"한_Dismiss_______________빠"}
+{"widgetLabel":"스케치","undo":"실행 취소","redo":"다시 실행","draw":{"point":"포인트 그리기","polygon":"폴리곤 그리기","polyline":"폴리라인 그리기","circle":"원 그리기","rectangle":"사각형 그리기","multipoint":"멀티포인트 그리기","mesh":"메시 그리기","freehandPolyline":"폴리라인 그리기(자유곡선)","freehandPolygon":"폴리곤 그리기(자유곡선)","streamPolyline":"폴리라인 그리기(하천)","streamPolygon":"폴리곤 그리기(하천)","text":"텍스트 추가"},"digitizers":{"root-point":"포인트 그리기","root-polygon":"폴리곤 그리기","root-polyline":"폴리라인 그리기","root-circle":"타원 또는 원 그리기","root-rectangle":"직사각형 또는 정사각형 그리기","root-multipoint":"멀티포인트 그리기","root-mesh":"메시 그리기","root-text":"텍스트 추가","leaf-point":"포인트","leaf-distance-distance":"거리-거리(원-원 교차)","leaf-direction-distance":"방향-거리(원-선 교차)","leaf-direction-direction":"방향-방향(선-선 교차)","leaf-point-segment":"라인 세그먼트","leaf-autocomplete":"자동 완성","leaf-right-angle":"직각 세그먼트","leaf-freehand":"자유곡선 세그먼트","leaf-stream":"하천 세그먼트","leaf-tangent-arc":"탄젠트 곡선 세그먼트","leaf-circular-arc":"호 세그먼트","leaf-endpoint-arc":"끝점 호 세그먼트","leaf-bezier":"베지어 곡선 세그먼트"},"partActions":{"completePart":"파트 완료","completeInput":"현재 입력 완료","releaseManipulator":"커서 추적 중지","captureManipulator":"커서 추적","completeDrawing":"종료","cancelDrawing":"취소"},"keyboardFeedback":{"tooltip":"키보드 이동 속도: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip}(단축키)"},"advancedSettings":{"keyboardInput":"고급 키보드 단축키 사용"},"settings":{"toolOptionsHeading":"그리기 옵션","freehandSnappingEnabledTitle":"드래그하지 않을 때 자유곡선이 스냅됨","freehandSnappingEnabledDescription":"이 옵션을 활성화하면 자유곡선 세그먼트 도구에서 실제로 드래그하지 않는 동안 스내핑이 적용됩니다.","bezierEnableSplineBehaviorTitle":"베지어로 스플라인 그리기","bezierEnableSplineBehaviorDescription":"이 옵션을 활성화하면 베지어 세그먼트 도구가 이전 세그먼트에서 이어지는 각 세그먼트의 첫 번째 기준점을 추론합니다."},"selectedCount":"선택: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"처리 중","finalizingDrawingHint":"성능 및 호환성을 위해 그리기를 단순화하는 중입니다. 더 빠르게 처리하려면 자체 교차하거나 중첩되는 세그먼트를 피하세요.","finalizingDrawingCompleteHint":"앞서 생성한 그리기는 성능 및 호환성을 위해 단순화가 필요했습니다. 앞으로 이 단계를 거치지 않으려면 중첩되거나 자체 교차하는 부분이 있는 폴리곤을 그리지 마세요.","deleteFeature":"피처 삭제","deleteFeatures":"피처 삭제","selectFeature":"피처 선택","duplicateFeature":"피처 복제","duplicateFeatures":"여러 피처 복제","finalizingDrawingTitle":"지오메트리를 처리하는 중..."}

package/assets/esri/widgets/Sketch/t9n/Sketch_lt.json

@@ -1 +1 @@
-{"widgetLabel":"Eskizas","undo":"Atšaukti","redo":"Grąžinti","draw":{"point":"Brėžti tašką","polygon":"Brėžti poligoną","polyline":"Brėžti poliliniją","circle":"Brėžti apskritimą","rectangle":"Brėžti stačiakampį","multipoint":"Brėžti keletą taškų","mesh":"Brėžti tinklelį","freehandPolyline":"Brėžti poliliniją (laisvai)","freehandPolygon":"Brėžti poligoną (laisvai)","streamPolyline":"Brėžti poliliniją (srovė)","streamPolygon":"Brėžti poligoną (srovė)","text":"Pridėti tekstą"},"digitizers":{"root-point":"Brėžti tašką","root-polygon":"Brėžti poligoną","root-polyline":"Brėžti poliliniją","root-circle":"Brėžti apskritimą arba elipsę","root-rectangle":"Brėžti stačiakampį arba kvadratą","root-multipoint":"Brėžti keletą taškų","root-mesh":"Brėžti tinklelį","root-text":"Pridėti tekstą","leaf-point":"Taškas","leaf-distance-distance":"Atstumas–atstumas (apskritimo–apskritimo sankirta)","leaf-direction-distance":"Kryptis–atstumas (apskritimo–linijos sankirta)","leaf-direction-direction":"Kryptis–kryptis (linijos–linijos sankirta)","leaf-point-segment":"Linijos segmentas","leaf-autocomplete":"Automatiškai užbaigti","leaf-right-angle":"Stačiojo kampo segmentas","leaf-freehand":"Braižymo ranka segmentas","leaf-stream":"Srauto segmentas","leaf-tangent-arc":"Liestinės kreivės segmentas","leaf-circular-arc":"Lanko segmentas","leaf-endpoint-arc":"Pabaigos taško lanko segmentas","leaf-bezier":"Bezjė kreivės segmentas"},"partActions":{"completePart":"Baigti dalį","completeInput":"Baigti dabartinę įvestį","releaseManipulator":"Nebesekti žymeklio","captureManipulator":"Sekti žymeklį","completeDrawing":"Baigti","cancelDrawing":"Atšaukti"},"keyboardFeedback":{"tooltip":"Klaviatūros judėjimo greitis: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Įjungti išplėstinius klaviatūros klavišus"},"settings":{"toolOptionsHeading":"Į_Drawing options________________š","freehandSnappingEnabledTitle":"Į_Freehand snaps when not streaming__________________š","freehandSnappingEnabledDescription":"Į_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________š.","bezierEnableSplineBehaviorTitle":"Į_Bezier draws splines_____________________š","bezierEnableSplineBehaviorDescription":"Į_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________š."},"selectedCount":"Pasirinkimas: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Į_Processing_____________________š","finalizingDrawingHint":"Į_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________š.","finalizingDrawingCompleteHint":"Į_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________š.","deleteFeature":"Ištrinti elementą","deleteFeatures":"Ištrinti elementus","selectFeature":"Pasirinkti elementą","duplicateFeature":"Dubliuoti elementą","duplicateFeatures":"Dubliuoti elementus","finalizingDrawingTitle":"Į_Processing geometry_______________________š...","finalizingDrawingCompleteTitle":"Į_Geometry required optimization_______________________________š","simplificationDismiss":"Į_Dismiss_______________š"}
+{"widgetLabel":"Eskizas","undo":"Atšaukti","redo":"Grąžinti","draw":{"point":"Brėžti tašką","polygon":"Brėžti poligoną","polyline":"Brėžti poliliniją","circle":"Brėžti apskritimą","rectangle":"Brėžti stačiakampį","multipoint":"Brėžti keletą taškų","mesh":"Brėžti tinklelį","freehandPolyline":"Brėžti poliliniją (laisvai)","freehandPolygon":"Brėžti poligoną (laisvai)","streamPolyline":"Brėžti poliliniją (srovė)","streamPolygon":"Brėžti poligoną (srovė)","text":"Pridėti tekstą"},"digitizers":{"root-point":"Brėžti tašką","root-polygon":"Brėžti poligoną","root-polyline":"Brėžti poliliniją","root-circle":"Brėžti apskritimą arba elipsę","root-rectangle":"Brėžti stačiakampį arba kvadratą","root-multipoint":"Brėžti keletą taškų","root-mesh":"Brėžti tinklelį","root-text":"Pridėti tekstą","leaf-point":"Taškas","leaf-distance-distance":"Atstumas–atstumas (apskritimo–apskritimo sankirta)","leaf-direction-distance":"Kryptis–atstumas (apskritimo–linijos sankirta)","leaf-direction-direction":"Kryptis–kryptis (linijos–linijos sankirta)","leaf-point-segment":"Linijos segmentas","leaf-autocomplete":"Automatiškai užbaigti","leaf-right-angle":"Stačiojo kampo segmentas","leaf-freehand":"Braižymo ranka segmentas","leaf-stream":"Srauto segmentas","leaf-tangent-arc":"Liestinės kreivės segmentas","leaf-circular-arc":"Lanko segmentas","leaf-endpoint-arc":"Pabaigos taško lanko segmentas","leaf-bezier":"Bezjė kreivės segmentas"},"partActions":{"completePart":"Baigti dalį","completeInput":"Baigti dabartinę įvestį","releaseManipulator":"Nebesekti žymeklio","captureManipulator":"Sekti žymeklį","completeDrawing":"Baigti","cancelDrawing":"Atšaukti"},"keyboardFeedback":{"tooltip":"Klaviatūros judėjimo greitis: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Įjungti išplėstinius klaviatūros klavišus"},"settings":{"toolOptionsHeading":"Braižymo parinktys","freehandSnappingEnabledTitle":"Ranka brėžiami eskizai pritraukiami, kai nesiunčiami srautiniu būdu","freehandSnappingEnabledDescription":"Kai ši funkcija įjungta, braižymo ranka segmentų įrankis pritaiko pritraukimą, kai aktyviai nevelkama.","bezierEnableSplineBehaviorTitle":"Bezjė įrankiu brėžiamos kreivės","bezierEnableSplineBehaviorDescription":"Kai ši funkcija įjungta, Bezjė segmentų įrankiu nustatomas kiekvieno paskesnio segmento pirmas kontrolinis taškas remiantis ankstesniu segmentu."},"selectedCount":"Pasirinkimas: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Apdorojama","finalizingDrawingHint":"Jūsų brėžinys supaprastinamas siekiant našumo ir suderinamumo. Siekiant spartesnio apdorojimo, venkite save kertančių ir persidengiančių segmentų.","finalizingDrawingCompleteHint":"Anksčiau sukurtą brėžinį reikia supaprastinti siekiant našumo ir suderinamumo. Kad išvengtumėte šio veiksmo ateityje, nebraižykite poligonų su perisdenčiančiomis ir save kertančiomis sekcijomis.","deleteFeature":"Ištrinti elementą","deleteFeatures":"Ištrinti elementus","selectFeature":"Pasirinkti elementą","duplicateFeature":"Dubliuoti elementą","duplicateFeatures":"Dubliuoti elementus","finalizingDrawingTitle":"Apdorojama geometrija…"}

package/assets/esri/widgets/Sketch/t9n/Sketch_lv.json

@@ -1 +1 @@
-{"widgetLabel":"Skice","undo":"Atsaukt","redo":"Atcelt atsaukšanu","draw":{"point":"Zīmēt punktu","polygon":"Zīmēt poligonu","polyline":"Zīmēt polilīniju","circle":"Zīmēt apli","rectangle":"Zīmēt taisnstūri","multipoint":"Zīmēt vairākpunktu","mesh":"Zīmēt režģi","freehandPolyline":"Zīmēt polilīniju (ar brīvu roku)","freehandPolygon":"Zīmēt laukumu (ar brīvu roku)","streamPolyline":"Zīmēt līniju (straumēt)","streamPolygon":"Zīmēt laukumu (straumēt)","text":"Pievienot tekstu"},"digitizers":{"root-point":"Zīmēt punktu","root-polygon":"Zīmēt poligonu","root-polyline":"Zīmēt līniju","root-circle":"Zīmēt apli vai elipsi","root-rectangle":"Zīmēt taisnstūri vai kvadrātu","root-multipoint":"Zīmēt vairākpunktu","root-mesh":"Zīmēt režģi","root-text":"Pievienot tekstu","leaf-point":"Punkts","leaf-distance-distance":"Attālums-attālums (aplis-aplis krustpunkts)","leaf-direction-distance":"Virziens-attālums (aplis-līnija krustpunkts)","leaf-direction-direction":"Virziens-virziens (līnija-līnija krustpunkts)","leaf-point-segment":"Līnijas segments","leaf-autocomplete":"Automātiski pabeigt","leaf-right-angle":"Taisnleņķa segments","leaf-freehand":"Brīvrokas segments","leaf-stream":"Straumēt segmentu","leaf-tangent-arc":"Pieskares līknes segments","leaf-circular-arc":"Līknes segments","leaf-endpoint-arc":"Galapunkta līknes segments","leaf-bezier":"Bezjē līknes segments"},"partActions":{"completePart":"Pabeigt daļu","completeInput":"Pabeigt pašreizējo ievadi","releaseManipulator":"Pārtraukt kursora sekošanu","captureManipulator":"Sekot kursoram","completeDrawing":"Pabeigt","cancelDrawing":"Atcelt"},"keyboardFeedback":{"tooltip":"Tastatūras kustības ātrums: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (īsceļa taustiņš)"},"advancedSettings":{"keyboardInput":"Iespējot papildu tastatūras saīsnes"},"settings":{"toolOptionsHeading":"ķ_Drawing options________________ū","freehandSnappingEnabledTitle":"ķ_Freehand snaps when not streaming__________________ū","freehandSnappingEnabledDescription":"ķ_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________ū.","bezierEnableSplineBehaviorTitle":"ķ_Bezier draws splines_____________________ū","bezierEnableSplineBehaviorDescription":"ķ_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________ū."},"selectedCount":"Izvēle: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"ķ_Processing_____________________ū","finalizingDrawingHint":"ķ_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________ū.","finalizingDrawingCompleteHint":"ķ_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________ū.","deleteFeature":"Izdzēst elementu","deleteFeatures":"Dzēst elementus","selectFeature":"Atlasīt elementu","duplicateFeature":"Dublēt elementu","duplicateFeatures":"Dublēt elementus","finalizingDrawingTitle":"ķ_Processing geometry_______________________ū...","finalizingDrawingCompleteTitle":"ķ_Geometry required optimization_______________________________ū","simplificationDismiss":"ķ_Dismiss_______________ū"}
+{"widgetLabel":"Skice","undo":"Atsaukt","redo":"Atcelt atsaukšanu","draw":{"point":"Zīmēt punktu","polygon":"Zīmēt poligonu","polyline":"Zīmēt polilīniju","circle":"Zīmēt apli","rectangle":"Zīmēt taisnstūri","multipoint":"Zīmēt vairākpunktu","mesh":"Zīmēt režģi","freehandPolyline":"Zīmēt polilīniju (ar brīvu roku)","freehandPolygon":"Zīmēt laukumu (ar brīvu roku)","streamPolyline":"Zīmēt līniju (straumēt)","streamPolygon":"Zīmēt laukumu (straumēt)","text":"Pievienot tekstu"},"digitizers":{"root-point":"Zīmēt punktu","root-polygon":"Zīmēt poligonu","root-polyline":"Zīmēt līniju","root-circle":"Zīmēt apli vai elipsi","root-rectangle":"Zīmēt taisnstūri vai kvadrātu","root-multipoint":"Zīmēt vairākpunktu","root-mesh":"Zīmēt režģi","root-text":"Pievienot tekstu","leaf-point":"Punkts","leaf-distance-distance":"Attālums-attālums (aplis-aplis krustpunkts)","leaf-direction-distance":"Virziens-attālums (aplis-līnija krustpunkts)","leaf-direction-direction":"Virziens-virziens (līnija-līnija krustpunkts)","leaf-point-segment":"Līnijas segments","leaf-autocomplete":"Automātiski pabeigt","leaf-right-angle":"Taisnleņķa segments","leaf-freehand":"Brīvrokas segments","leaf-stream":"Straumēt segmentu","leaf-tangent-arc":"Pieskares līknes segments","leaf-circular-arc":"Līknes segments","leaf-endpoint-arc":"Galapunkta līknes segments","leaf-bezier":"Bezjē līknes segments"},"partActions":{"completePart":"Pabeigt daļu","completeInput":"Pabeigt pašreizējo ievadi","releaseManipulator":"Pārtraukt kursora sekošanu","captureManipulator":"Sekot kursoram","completeDrawing":"Pabeigt","cancelDrawing":"Atcelt"},"keyboardFeedback":{"tooltip":"Tastatūras kustības ātrums: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (īsceļa taustiņš)"},"advancedSettings":{"keyboardInput":"Iespējot papildu tastatūras saīsnes"},"settings":{"toolOptionsHeading":"Zīmēšanas opcijas","freehandSnappingEnabledTitle":"Brīvrokas fotografēšana, kad netiek straumēts","freehandSnappingEnabledDescription":"Ja brīvrokas segmenta rīks ir iespējots, tas veic piesaisti, aktīvi nevelkot.","bezierEnableSplineBehaviorTitle":"Bezjē zīmē splainus","bezierEnableSplineBehaviorDescription":"Kad šī opcija ir iespējota, Bezjē segmenta rīks katra nākamā segmenta pirmo kontrolpunktu nosaka, balstoties uz iepriekšējo segmentu."},"selectedCount":"Izvēle: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Notiek apstrāde","finalizingDrawingHint":"Jūsu zīmējums tiek vienkāršots, lai uzlabotu veiktspēju un saderību. Lai nodrošinātu ātrāku apstrādi, izvairieties no paškrustojošiem un pārklājošiem segmentiem.","finalizingDrawingCompleteHint":"Iepriekš izveidotajam zīmējumam bija nepieciešama vienkāršošana, lai uzlabotu veiktspēju un saderību. Lai turpmāk izvairītos no šīs darbības, nezīmējiet poligonus ar sadaļām, kas pārklājas vai paškrustojas.","deleteFeature":"Izdzēst elementu","deleteFeatures":"Dzēst elementus","selectFeature":"Atlasīt elementu","duplicateFeature":"Dublēt elementu","duplicateFeatures":"Dublēt elementus","finalizingDrawingTitle":"Notiek ģeometrijas apstrāde..."}

package/assets/esri/widgets/Sketch/t9n/Sketch_nl.json

@@ -1 +1 @@
-{"widgetLabel":"Schetsen","undo":"Ongedaan maken","redo":"Opnieuw uitvoeren","draw":{"point":"Een punt tekenen","polygon":"Teken een polygoon","polyline":"Een polylijn tekenen","circle":"Een cirkel tekenen","rectangle":"Een rechthoek tekenen","multipoint":"Een multipunt tekenen","mesh":"Een mesh tekenen","freehandPolyline":"Een polylijn tekenen (vrije hand)","freehandPolygon":"Een polygoon tekenen (vrije hand)","streamPolyline":"Teken een polylijn (stroom)","streamPolygon":"Teken een polygoon (stroom)","text":"Tekst toevoegen"},"digitizers":{"root-point":"Een punt tekenen","root-polygon":"Teken een polygoon","root-polyline":"Een polylijn tekenen","root-circle":"Een cirkel of ellips tekenen","root-rectangle":"Een rechthoek of vierkant tekenen","root-multipoint":"Een multipunt tekenen","root-mesh":"Een mesh tekenen","root-text":"Tekst toevoegen","leaf-point":"Punt","leaf-distance-distance":"Afstand-afstand (cirkel-cirkel-kruispunt)","leaf-direction-distance":"Richting-afstand (cirkel-lijn-kruispunt)","leaf-direction-direction":"Richting-richting (lijn-lijn-kruispunt)","leaf-point-segment":"Lijnsegment","leaf-autocomplete":"Automatisch invullen","leaf-right-angle":"Rechte hoek-segment","leaf-freehand":"Vrije hand-segment","leaf-stream":"Stroomsegment","leaf-tangent-arc":"Raaklijncurve-segment","leaf-circular-arc":"Boogsegment","leaf-endpoint-arc":"Eindpunt boog-segment","leaf-bezier":"Beziér-curve-segment"},"partActions":{"completePart":"Deel voltooien","completeInput":"Huidige invoer voltooien","releaseManipulator":"Cursor niet meer volgen","captureManipulator":"Cursor volgen","completeDrawing":"Voltooien","cancelDrawing":"Annuleren"},"keyboardFeedback":{"tooltip":"Snelheid toetsenbordbewegingen: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Geavanceerde sneltoetsen inschakelen"},"settings":{"toolOptionsHeading":"IJ_Drawing options________________ä","freehandSnappingEnabledTitle":"IJ_Freehand snaps when not streaming__________________ä","freehandSnappingEnabledDescription":"IJ_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________ä.","bezierEnableSplineBehaviorTitle":"IJ_Bezier draws splines_____________________ä","bezierEnableSplineBehaviorDescription":"IJ_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________ä."},"selectedCount":"Selectie: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"IJ_Processing_____________________ä","finalizingDrawingHint":"IJ_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________ä.","finalizingDrawingCompleteHint":"IJ_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________ä.","deleteFeature":"Object verwijderen","deleteFeatures":"Objecten verwijderen","selectFeature":"Object selecteren","duplicateFeature":"Object dupliceren","duplicateFeatures":"Objecten dupliceren","finalizingDrawingTitle":"IJ_Processing geometry_______________________ä...","finalizingDrawingCompleteTitle":"IJ_Geometry required optimization_______________________________ä","simplificationDismiss":"IJ_Dismiss_______________ä"}
+{"widgetLabel":"Schetsen","undo":"Ongedaan maken","redo":"Opnieuw uitvoeren","draw":{"point":"Een punt tekenen","polygon":"Teken een polygoon","polyline":"Een polylijn tekenen","circle":"Een cirkel tekenen","rectangle":"Een rechthoek tekenen","multipoint":"Een multipunt tekenen","mesh":"Een mesh tekenen","freehandPolyline":"Een polylijn tekenen (vrije hand)","freehandPolygon":"Een polygoon tekenen (vrije hand)","streamPolyline":"Teken een polylijn (stroom)","streamPolygon":"Teken een polygoon (stroom)","text":"Tekst toevoegen"},"digitizers":{"root-point":"Een punt tekenen","root-polygon":"Teken een polygoon","root-polyline":"Een polylijn tekenen","root-circle":"Een cirkel of ellips tekenen","root-rectangle":"Een rechthoek of vierkant tekenen","root-multipoint":"Een multipunt tekenen","root-mesh":"Een mesh tekenen","root-text":"Tekst toevoegen","leaf-point":"Punt","leaf-distance-distance":"Afstand-afstand (cirkel-cirkel-kruispunt)","leaf-direction-distance":"Richting-afstand (cirkel-lijn-kruispunt)","leaf-direction-direction":"Richting-richting (lijn-lijn-kruispunt)","leaf-point-segment":"Lijnsegment","leaf-autocomplete":"Automatisch invullen","leaf-right-angle":"Rechte hoek-segment","leaf-freehand":"Vrije hand-segment","leaf-stream":"Stroomsegment","leaf-tangent-arc":"Raaklijncurve-segment","leaf-circular-arc":"Boogsegment","leaf-endpoint-arc":"Eindpunt boog-segment","leaf-bezier":"Beziér-curve-segment"},"partActions":{"completePart":"Deel voltooien","completeInput":"Huidige invoer voltooien","releaseManipulator":"Cursor niet meer volgen","captureManipulator":"Cursor volgen","completeDrawing":"Voltooien","cancelDrawing":"Annuleren"},"keyboardFeedback":{"tooltip":"Snelheid toetsenbordbewegingen: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Geavanceerde sneltoetsen inschakelen"},"settings":{"toolOptionsHeading":"Tekenopties","freehandSnappingEnabledTitle":"Vrije hand wordt vastgezet als er niet wordt gestreamd","freehandSnappingEnabledDescription":"Indien dit is ingeschakeld, past de segmenttool Vrije hand snapping toe als er niet actief wordt gesleept.","bezierEnableSplineBehaviorTitle":"Bezier tekent splines","bezierEnableSplineBehaviorDescription":"Indien ingeschakeld, leidt de Bezier-segmenttool het eerste controlepunt van elk volgende segment af aan de hand van het voorgaande segment."},"selectedCount":"Selectie: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Bezig met verwerken","finalizingDrawingHint":"Uw tekening wordt vereenvoudigd voor prestatie- en compatibiliteitsdoeleinden. Er kan sneller worden verwerkt als u geen zelf-kruisende en overlappende segmenten hebt.","finalizingDrawingCompleteHint":"De tekening die eerder is gemaakt, moest worden vereenvoudigd vanwege prestaties en compatibiliteit. U kunt deze stap in de toekomst vermijden door geen polygonen met overlappende en zelf-kruisende secties te tekenen.","deleteFeature":"Object verwijderen","deleteFeatures":"Objecten verwijderen","selectFeature":"Object selecteren","duplicateFeature":"Object dupliceren","duplicateFeatures":"Objecten dupliceren","finalizingDrawingTitle":"Bezig met verwerken geometrie..."}

package/assets/esri/widgets/Sketch/t9n/Sketch_no.json

@@ -1 +1 @@
-{"widgetLabel":"Skisse","undo":"Angre","redo":"Gjør om","draw":{"point":"Tegn et punkt","polygon":"Tegn en polygon","polyline":"Tegn en polylinje","circle":"Tegn en sirkel","rectangle":"Tegn et rektangel","multipoint":"Tegn et multipunkt","mesh":"Tegn en maske","freehandPolyline":"Tegn en polylinje (frihånd)","freehandPolygon":"Tegn et polygon (frihånd)","streamPolyline":"Tegn en polylinje (strøm)","streamPolygon":"Tegn et polygon (strøm)","text":"Legg til tekst"},"digitizers":{"root-point":"Tegn et punkt","root-polygon":"Tegn en polygon","root-polyline":"Tegn en polylinje","root-circle":"Tegn en sirkel eller ellipse","root-rectangle":"Tegn et rektangel eller kvadrat","root-multipoint":"Tegn et multipunkt","root-mesh":"Tegn en maske","root-text":"Legg til tekst","leaf-point":"Punkt","leaf-distance-distance":"Avstand-avstand (sirkel-sirkel-krysningspunkt)","leaf-direction-distance":"Retning-avstand (sirkel-linje-krysningspunkt)","leaf-direction-direction":"Retning-retning (linje-linje-krysningspunkt)","leaf-point-segment":"Linjesegment","leaf-autocomplete":"Autofullfør","leaf-right-angle":"Rettvinklet segment","leaf-freehand":"Frihåndssegment","leaf-stream":"Strømsegment","leaf-tangent-arc":"Tangeringskurvesegment","leaf-circular-arc":"Buesegment","leaf-endpoint-arc":"Endepunktbuesegment","leaf-bezier":"Bezierkurvesegment"},"partActions":{"completePart":"Fullfør del","completeInput":"Fullfør nåværende inndata","releaseManipulator":"Slutt å følge markøren","captureManipulator":"Følg markøren","completeDrawing":"Fullfør","cancelDrawing":"Avbryt"},"keyboardFeedback":{"tooltip":"Tastaturbevegelseshastighet: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (hurtigtast)"},"advancedSettings":{"keyboardInput":"Aktiver hurtigtaster"},"settings":{"toolOptionsHeading":"å_Drawing options________________ø","freehandSnappingEnabledTitle":"å_Freehand snaps when not streaming__________________ø","freehandSnappingEnabledDescription":"å_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________ø.","bezierEnableSplineBehaviorTitle":"å_Bezier draws splines_____________________ø","bezierEnableSplineBehaviorDescription":"å_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________ø."},"selectedCount":"Utvalg: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"å_Processing_____________________ø","finalizingDrawingHint":"å_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________ø.","finalizingDrawingCompleteHint":"å_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________ø.","deleteFeature":"Slett geoobjekt","deleteFeatures":"Slett geoobjekter","selectFeature":"Velg geoobjekt","duplicateFeature":"Duplikat geoobjekt","duplicateFeatures":"Duplikate geoobjekter","finalizingDrawingTitle":"å_Processing geometry_______________________ø...","finalizingDrawingCompleteTitle":"å_Geometry required optimization_______________________________ø","simplificationDismiss":"å_Dismiss_______________ø"}
+{"widgetLabel":"Skisse","undo":"Angre","redo":"Gjør om","draw":{"point":"Tegn et punkt","polygon":"Tegn en polygon","polyline":"Tegn en polylinje","circle":"Tegn en sirkel","rectangle":"Tegn et rektangel","multipoint":"Tegn et multipunkt","mesh":"Tegn en maske","freehandPolyline":"Tegn en polylinje (frihånd)","freehandPolygon":"Tegn et polygon (frihånd)","streamPolyline":"Tegn en polylinje (strøm)","streamPolygon":"Tegn et polygon (strøm)","text":"Legg til tekst"},"digitizers":{"root-point":"Tegn et punkt","root-polygon":"Tegn en polygon","root-polyline":"Tegn en polylinje","root-circle":"Tegn en sirkel eller ellipse","root-rectangle":"Tegn et rektangel eller kvadrat","root-multipoint":"Tegn et multipunkt","root-mesh":"Tegn en maske","root-text":"Legg til tekst","leaf-point":"Punkt","leaf-distance-distance":"Avstand-avstand (sirkel-sirkel-krysningspunkt)","leaf-direction-distance":"Retning-avstand (sirkel-linje-krysningspunkt)","leaf-direction-direction":"Retning-retning (linje-linje-krysningspunkt)","leaf-point-segment":"Linjesegment","leaf-autocomplete":"Autofullfør","leaf-right-angle":"Rettvinklet segment","leaf-freehand":"Frihåndssegment","leaf-stream":"Strømsegment","leaf-tangent-arc":"Tangeringskurvesegment","leaf-circular-arc":"Buesegment","leaf-endpoint-arc":"Endepunktbuesegment","leaf-bezier":"Bezierkurvesegment"},"partActions":{"completePart":"Fullfør del","completeInput":"Fullfør nåværende inndata","releaseManipulator":"Slutt å følge markøren","captureManipulator":"Følg markøren","completeDrawing":"Fullfør","cancelDrawing":"Avbryt"},"keyboardFeedback":{"tooltip":"Tastaturbevegelseshastighet: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (hurtigtast)"},"advancedSettings":{"keyboardInput":"Aktiver hurtigtaster"},"settings":{"toolOptionsHeading":"Tegnealternativer","freehandSnappingEnabledTitle":"Frihånd forankres utenom strømming","freehandSnappingEnabledDescription":"Når dette er aktivert, bruker Frihånd-segmentverktøyet forankring når det ikke aktivt dras.","bezierEnableSplineBehaviorTitle":"Bezier tegner spliner","bezierEnableSplineBehaviorDescription":"Når dette er aktivert, utleder Bezier-segmentverktøyet det første kontrollpunktet for hvert etterfølgende segment fra forrige segment."},"selectedCount":"Utvalg: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Behandler","finalizingDrawingHint":"Tegningen din blir forenklet med tanke på ytelse og kompatibilitet. Med tanke på raskere behandling bør du unngå segmenter som sammenføyer seg selv og som overlapper.","finalizingDrawingCompleteHint":"Tegningen du opprettet tidligere, krever forenkling med tanke på ytelse og kompatibilitet. Hvis du vil unngå dette trinnet i fremtiden, bør du ikke tegne polygoner med overlappende seksjoner eller seksjoner som sammenføyer seg selv.","deleteFeature":"Slett geoobjekt","deleteFeatures":"Slett geoobjekter","selectFeature":"Velg geoobjekt","duplicateFeature":"Duplikat geoobjekt","duplicateFeatures":"Duplikate geoobjekter","finalizingDrawingTitle":"Behandler geometri …"}

package/assets/esri/widgets/Sketch/t9n/Sketch_pl.json

@@ -1 +1 @@
-{"widgetLabel":"Dodaj geometrię","undo":"Cofnij","redo":"Ponów","draw":{"point":"Rysuj punkt","polygon":"Rysuj poligon","polyline":"Rysuj polilinię","circle":"Rysuj okrąg","rectangle":"Rysuj prostokąt","multipoint":"Rysuj wielopunkt","mesh":"Rysuj siatkę","freehandPolyline":"Narysuj polilinię (odręcznie)","freehandPolygon":"Narysuj poligon (odręcznie)","streamPolyline":"Narysuj polilinię (strumień)","streamPolygon":"Narysuj poligon (strumień)","text":"Dodaj tekst"},"digitizers":{"root-point":"Rysuj punkt","root-polygon":"Rysuj poligon","root-polyline":"Rysuj polilinię","root-circle":"Rysuj koło lub elipsę","root-rectangle":"Rysuj prostokąt lub kwadrat","root-multipoint":"Rysuj wielopunkt","root-mesh":"Rysuj siatkę","root-text":"Dodaj tekst","leaf-point":"Punkt","leaf-distance-distance":"Odległość-odległość (przecięcie okręgów)","leaf-direction-distance":"Kierunek-odległość (przecięcie okręgu z linią)","leaf-direction-direction":"Kierunek-kierunek (przecięcie linii)","leaf-point-segment":"Segment linii","leaf-autocomplete":"Autouzupełnianie","leaf-right-angle":"Segment kąta prostego","leaf-freehand":"Segment dowolnej linii","leaf-stream":"Segment strumienia","leaf-tangent-arc":"Segment krzywej stycznej","leaf-circular-arc":"Segment łuku","leaf-endpoint-arc":"Punkt końcowy segmentu łuku","leaf-bezier":"Segment krzywej Beziera"},"partActions":{"completePart":"Zakończ część","completeInput":"Zakończ bieżące wprowadzanie","releaseManipulator":"Przestań śledzić kursor","captureManipulator":"Śledź kursor","completeDrawing":"Zakończ","cancelDrawing":"Anuluj"},"keyboardFeedback":{"tooltip":"Szybkość ruchu klawiatury: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (skrót klawiszowy)"},"advancedSettings":{"keyboardInput":"Włącz zaawansowane skróty klawiaturowe"},"settings":{"toolOptionsHeading":"ł_Drawing options________________ą","freehandSnappingEnabledTitle":"ł_Freehand snaps when not streaming__________________ą","freehandSnappingEnabledDescription":"ł_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________ą.","bezierEnableSplineBehaviorTitle":"ł_Bezier draws splines_____________________ą","bezierEnableSplineBehaviorDescription":"ł_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________ą."},"selectedCount":"Wybór: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"ł_Processing_____________________ą","finalizingDrawingHint":"ł_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________ą.","finalizingDrawingCompleteHint":"ł_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________ą.","deleteFeature":"Usuń obiekt","deleteFeatures":"Usuń obiekty","selectFeature":"Wybierz obiekt","duplicateFeature":"Duplikuj obiekt","duplicateFeatures":"Duplikuj obiekty","finalizingDrawingTitle":"ł_Processing geometry_______________________ą...","finalizingDrawingCompleteTitle":"ł_Geometry required optimization_______________________________ą","simplificationDismiss":"ł_Dismiss_______________ą"}
+{"widgetLabel":"Dodaj geometrię","undo":"Cofnij","redo":"Ponów","draw":{"point":"Rysuj punkt","polygon":"Rysuj poligon","polyline":"Rysuj polilinię","circle":"Rysuj okrąg","rectangle":"Rysuj prostokąt","multipoint":"Rysuj wielopunkt","mesh":"Rysuj siatkę","freehandPolyline":"Narysuj polilinię (odręcznie)","freehandPolygon":"Narysuj poligon (odręcznie)","streamPolyline":"Narysuj polilinię (strumień)","streamPolygon":"Narysuj poligon (strumień)","text":"Dodaj tekst"},"digitizers":{"root-point":"Rysuj punkt","root-polygon":"Rysuj poligon","root-polyline":"Rysuj polilinię","root-circle":"Rysuj koło lub elipsę","root-rectangle":"Rysuj prostokąt lub kwadrat","root-multipoint":"Rysuj wielopunkt","root-mesh":"Rysuj siatkę","root-text":"Dodaj tekst","leaf-point":"Punkt","leaf-distance-distance":"Odległość-odległość (przecięcie okręgów)","leaf-direction-distance":"Kierunek-odległość (przecięcie okręgu z linią)","leaf-direction-direction":"Kierunek-kierunek (przecięcie linii)","leaf-point-segment":"Segment linii","leaf-autocomplete":"Autouzupełnianie","leaf-right-angle":"Segment kąta prostego","leaf-freehand":"Segment dowolnej linii","leaf-stream":"Segment strumienia","leaf-tangent-arc":"Segment krzywej stycznej","leaf-circular-arc":"Segment łuku","leaf-endpoint-arc":"Punkt końcowy segmentu łuku","leaf-bezier":"Segment krzywej Beziera"},"partActions":{"completePart":"Zakończ część","completeInput":"Zakończ bieżące wprowadzanie","releaseManipulator":"Przestań śledzić kursor","captureManipulator":"Śledź kursor","completeDrawing":"Zakończ","cancelDrawing":"Anuluj"},"keyboardFeedback":{"tooltip":"Szybkość ruchu klawiatury: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (skrót klawiszowy)"},"advancedSettings":{"keyboardInput":"Włącz zaawansowane skróty klawiaturowe"},"settings":{"toolOptionsHeading":"Opcje rysowania","freehandSnappingEnabledTitle":"Przyciąganie odręczne, gdy nie ma transmisji strumieniowej","freehandSnappingEnabledDescription":"Po włączeniu tej opcji narzędzie Segment odręczny stosuje przyciąganie, gdy nie jest aktywnie przeciągane.","bezierEnableSplineBehaviorTitle":"Bezier rysuje krzywe wygładzone","bezierEnableSplineBehaviorDescription":"Po włączeniu tej opcji narzędzie Segment Beziera wywodzi pierwszy punkt kontrolny każdego kolejnego segmentu na podstawie poprzedniego segmentu."},"selectedCount":"Wybór: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Przetwarzanie","finalizingDrawingHint":"Twój rysunek jest upraszczany w celu zapewnienia wydajności i zgodności. Aby przyspieszyć przetwarzanie, unikaj segmentów przecinających się lub nakładających się na siebie.","finalizingDrawingCompleteHint":"Wcześniej utworzony rysunek wymagał uproszczenia ze względu na wydajność i zgodność. Aby uniknąć tego etapu w przyszłości, nie rysuj wielokątów z nakładającymi się lub przecinającymi się odcinkami.","deleteFeature":"Usuń obiekt","deleteFeatures":"Usuń obiekty","selectFeature":"Wybierz obiekt","duplicateFeature":"Duplikuj obiekt","duplicateFeatures":"Duplikuj obiekty","finalizingDrawingTitle":"Przetwarzanie geometrii..."}

package/assets/esri/widgets/Sketch/t9n/Sketch_pt-BR.json

@@ -1 +1 @@
-{"widgetLabel":"Esboço","undo":"Desfazer","redo":"Refazer","draw":{"point":"Desenhar um ponto","polygon":"Desenhar um polígono","polyline":"Desenhar uma polilinha","circle":"Desenhar um círculo","rectangle":"Desenha um retângulo","multipoint":"Desenhar um ponto múltiplo","mesh":"Desenhar uma malha","freehandPolyline":"Desenhar uma polilinha (à mão livre)","freehandPolygon":"Desenhar um polígono (à mão livre)","streamPolyline":"Desenhe uma polilinha (fluxo)","streamPolygon":"Desenhe um polígono (fluxo)","text":"Adicionar texto"},"digitizers":{"root-point":"Desenhar um ponto","root-polygon":"Desenhar um polígono","root-polyline":"Desenhar uma polilinha","root-circle":"Desenhar um círculo ou elipse","root-rectangle":"Desenhar um retângulo ou quadrado","root-multipoint":"Desenhar um ponto múltiplo","root-mesh":"Desenhar uma malha","root-text":"Adicionar texto","leaf-point":"Ponto","leaf-distance-distance":"Distância-distância (intersecção círculo-círculo)","leaf-direction-distance":"Direção-distância (intersecção círculo-linha)","leaf-direction-direction":"Direção-direção (intersecção linha-linha)","leaf-point-segment":"Segmento de linha","leaf-autocomplete":"Auto completar","leaf-right-angle":"Segmento de ângulo à direita","leaf-freehand":"Segmento à mão livre","leaf-stream":"Segmento de fluxo","leaf-tangent-arc":"Segmento de curva tangente","leaf-circular-arc":"Segmento de arco","leaf-endpoint-arc":"Segmento de arco da extremidade","leaf-bezier":"Segmento de curva de Bezier"},"partActions":{"completePart":"Finalizar parte","completeInput":"Finalizar entrada atual","releaseManipulator":"Parar cursor à seguir","captureManipulator":"Cursor à seguir","completeDrawing":"Finalizar","cancelDrawing":"Cancelar"},"keyboardFeedback":{"tooltip":"Velocidade de movimento do teclado: {value} {unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Habilitar atalhos de teclado avançados"},"settings":{"toolOptionsHeading":"ã_Drawing options________________Ç","freehandSnappingEnabledTitle":"ã_Freehand snaps when not streaming__________________Ç","freehandSnappingEnabledDescription":"ã_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________Ç.","bezierEnableSplineBehaviorTitle":"ã_Bezier draws splines_____________________Ç","bezierEnableSplineBehaviorDescription":"ã_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________Ç."},"selectedCount":"Seleção: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"ã_Processing_____________________Ç","finalizingDrawingHint":"ã_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________Ç.","finalizingDrawingCompleteHint":"ã_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________Ç.","deleteFeature":"Excluir feição","deleteFeatures":"Excluir feições","selectFeature":"Selecionar feição","duplicateFeature":"Duplicar feição","duplicateFeatures":"Duplicar feições","finalizingDrawingTitle":"ã_Processing geometry_______________________Ç...","finalizingDrawingCompleteTitle":"ã_Geometry required optimization_______________________________Ç","simplificationDismiss":"ã_Dismiss_______________Ç"}
+{"widgetLabel":"Esboço","undo":"Desfazer","redo":"Refazer","draw":{"point":"Desenhar um ponto","polygon":"Desenhar um polígono","polyline":"Desenhar uma polilinha","circle":"Desenhar um círculo","rectangle":"Desenha um retângulo","multipoint":"Desenhar um ponto múltiplo","mesh":"Desenhar uma malha","freehandPolyline":"Desenhar uma polilinha (à mão livre)","freehandPolygon":"Desenhar um polígono (à mão livre)","streamPolyline":"Desenhe uma polilinha (fluxo)","streamPolygon":"Desenhe um polígono (fluxo)","text":"Adicionar texto"},"digitizers":{"root-point":"Desenhar um ponto","root-polygon":"Desenhar um polígono","root-polyline":"Desenhar uma polilinha","root-circle":"Desenhar um círculo ou elipse","root-rectangle":"Desenhar um retângulo ou quadrado","root-multipoint":"Desenhar um ponto múltiplo","root-mesh":"Desenhar uma malha","root-text":"Adicionar texto","leaf-point":"Ponto","leaf-distance-distance":"Distância-distância (intersecção círculo-círculo)","leaf-direction-distance":"Direção-distância (intersecção círculo-linha)","leaf-direction-direction":"Direção-direção (intersecção linha-linha)","leaf-point-segment":"Segmento de linha","leaf-autocomplete":"Auto completar","leaf-right-angle":"Segmento de ângulo à direita","leaf-freehand":"Segmento à mão livre","leaf-stream":"Segmento de fluxo","leaf-tangent-arc":"Segmento de curva tangente","leaf-circular-arc":"Segmento de arco","leaf-endpoint-arc":"Segmento de arco da extremidade","leaf-bezier":"Segmento de curva de Bezier"},"partActions":{"completePart":"Finalizar parte","completeInput":"Finalizar entrada atual","releaseManipulator":"Parar cursor à seguir","captureManipulator":"Cursor à seguir","completeDrawing":"Finalizar","cancelDrawing":"Cancelar"},"keyboardFeedback":{"tooltip":"Velocidade de movimento do teclado: {value} {unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Habilitar atalhos de teclado avançados"},"settings":{"toolOptionsHeading":"Opções de desenho","freehandSnappingEnabledTitle":"Fotos tiradas à mão livre quando não estou reproduzindo","freehandSnappingEnabledDescription":"Quando ativada, a ferramenta Segmento à mão livre aplica o alinhamento automático mesmo quando o usuário não está arrastando ativamente.","bezierEnableSplineBehaviorTitle":"Bezier desenha splines","bezierEnableSplineBehaviorDescription":"Quando ativada, a ferramenta de segmento Bezier infere o primeiro ponto de controle de cada segmento subsequente a partir do segmento anterior."},"selectedCount":"Seleção: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Processando","finalizingDrawingHint":"Seu desenho está sendo simplificado para melhor desempenho e compatibilidade. Para um processamento mais rápido, evite segmentos que se sobreponham ou se interseccionem.","finalizingDrawingCompleteHint":"O desenho criado anteriormente precisava ser simplificado para melhorar o desempenho e a compatibilidade. Para evitar esse problema no futuro, não desenhe polígonos com seções sobrepostas e que se autointersectam.","deleteFeature":"Excluir feição","deleteFeatures":"Excluir feições","selectFeature":"Selecionar feição","duplicateFeature":"Duplicar feição","duplicateFeatures":"Duplicar feições","finalizingDrawingTitle":"Processando geometria..."}

package/assets/esri/widgets/Sketch/t9n/Sketch_pt-PT.json

@@ -1 +1 @@
-{"widgetLabel":"Rascunho","undo":"Anular","redo":"Refazer","draw":{"point":"Desenhar um ponto","polygon":"Desenhar um polígono","polyline":"Desenhar uma polilinha","circle":"Desenhar um círculo","rectangle":"Desenhar um retângulo","multipoint":"Desenhar um multiponto","mesh":"Desenhar uma rede","freehandPolyline":"Desenhar uma polilinha (à mão livre)","freehandPolygon":"Desenhar um polígono (à mão livre)","streamPolyline":"Desenhar uma polilinha (stream)","streamPolygon":"Desenhar um polígono (stream)","text":"Adicionar texto"},"digitizers":{"root-point":"Desenhar um ponto","root-polygon":"Desenhar um polígono","root-polyline":"Desenhar uma polilinha","root-circle":"Desenhar um círculo ou uma elipse","root-rectangle":"Desenhar um retângulo ou quadrado","root-multipoint":"Desenhar um multiponto","root-mesh":"Desenhar uma rede","root-text":"Adicionar texto","leaf-point":"Ponto","leaf-distance-distance":"Distância-distância (interseção círculo-círculo)","leaf-direction-distance":"Direção-distância (interseção círculo-linha)","leaf-direction-direction":"Direção-direção (interseção linha-linha)","leaf-point-segment":"Segmento de linha","leaf-autocomplete":"Conclusão automática","leaf-right-angle":"Segmento de ângulo reto","leaf-freehand":"Segmento à mão livre","leaf-stream":"Segmento de stream","leaf-tangent-arc":"Segmento de curva tangente","leaf-circular-arc":"Segmento de arco","leaf-endpoint-arc":"Segmento de arco final","leaf-bezier":"Segmento de curva Bezier"},"partActions":{"completePart":"Terminar parte","completeInput":"Terminar entrada atual","releaseManipulator":"Parar de seguir o cursor","captureManipulator":"Seguir o cursor","completeDrawing":"Terminar","cancelDrawing":"Cancelar"},"keyboardFeedback":{"tooltip":"Velocidade de movimento do teclado: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Ativar atalhos de teclado avançados"},"settings":{"toolOptionsHeading":"õ_Drawing options________________ç","freehandSnappingEnabledTitle":"õ_Freehand snaps when not streaming__________________ç","freehandSnappingEnabledDescription":"õ_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________ç.","bezierEnableSplineBehaviorTitle":"õ_Bezier draws splines_____________________ç","bezierEnableSplineBehaviorDescription":"õ_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________ç."},"selectedCount":"Seleção: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"õ_Processing_____________________ç","finalizingDrawingHint":"õ_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________ç.","finalizingDrawingCompleteHint":"õ_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________ç.","deleteFeature":"Eliminar elemento","deleteFeatures":"Eliminar elementos","selectFeature":"Selecionar elemento","duplicateFeature":"Duplicar elemento","duplicateFeatures":"Duplicar elementos","finalizingDrawingTitle":"õ_Processing geometry_______________________ç...","finalizingDrawingCompleteTitle":"õ_Geometry required optimization_______________________________ç","simplificationDismiss":"õ_Dismiss_______________ç"}
+{"widgetLabel":"Rascunho","undo":"Anular","redo":"Refazer","draw":{"point":"Desenhar um ponto","polygon":"Desenhar um polígono","polyline":"Desenhar uma polilinha","circle":"Desenhar um círculo","rectangle":"Desenhar um retângulo","multipoint":"Desenhar um multiponto","mesh":"Desenhar uma rede","freehandPolyline":"Desenhar uma polilinha (à mão livre)","freehandPolygon":"Desenhar um polígono (à mão livre)","streamPolyline":"Desenhar uma polilinha (stream)","streamPolygon":"Desenhar um polígono (stream)","text":"Adicionar texto"},"digitizers":{"root-point":"Desenhar um ponto","root-polygon":"Desenhar um polígono","root-polyline":"Desenhar uma polilinha","root-circle":"Desenhar um círculo ou uma elipse","root-rectangle":"Desenhar um retângulo ou quadrado","root-multipoint":"Desenhar um multiponto","root-mesh":"Desenhar uma rede","root-text":"Adicionar texto","leaf-point":"Ponto","leaf-distance-distance":"Distância-distância (interseção círculo-círculo)","leaf-direction-distance":"Direção-distância (interseção círculo-linha)","leaf-direction-direction":"Direção-direção (interseção linha-linha)","leaf-point-segment":"Segmento de linha","leaf-autocomplete":"Conclusão automática","leaf-right-angle":"Segmento de ângulo reto","leaf-freehand":"Segmento à mão livre","leaf-stream":"Segmento de stream","leaf-tangent-arc":"Segmento de curva tangente","leaf-circular-arc":"Segmento de arco","leaf-endpoint-arc":"Segmento de arco final","leaf-bezier":"Segmento de curva Bezier"},"partActions":{"completePart":"Terminar parte","completeInput":"Terminar entrada atual","releaseManipulator":"Parar de seguir o cursor","captureManipulator":"Seguir o cursor","completeDrawing":"Terminar","cancelDrawing":"Cancelar"},"keyboardFeedback":{"tooltip":"Velocidade de movimento do teclado: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Ativar atalhos de teclado avançados"},"settings":{"toolOptionsHeading":"Opções de desenho","freehandSnappingEnabledTitle":"A ferramenta À mão livre ajusta quando não está a transmitir","freehandSnappingEnabledDescription":"Quando ativada, a ferramenta de segmento À mão livre aplica o ajuste enquanto não se estiver a arrastar ativamente.","bezierEnableSplineBehaviorTitle":"O Bezier desenha splines","bezierEnableSplineBehaviorDescription":"Quando ativada, a ferramenta de segmento Bezier determina o primeiro ponto de controlo de cada segmento subsequente com base no segmento anterior."},"selectedCount":"Seleção: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"A processar","finalizingDrawingHint":"O seu desenho está a ser simplificado por motivos de desempenho e compatibilidade. Para um processamento mais rápido, evite segmentos que se cruzem ou se sobreponham.","finalizingDrawingCompleteHint":"O desenho criado anteriormente precisava de ser simplificado por motivos de desempenho e compatibilidade. Para evitar este passo no futuro, não desenhe polígonos com secções sobrepostas ou que se cruzem entre si.","deleteFeature":"Eliminar elemento","deleteFeatures":"Eliminar elementos","selectFeature":"Selecionar elemento","duplicateFeature":"Duplicar elemento","duplicateFeatures":"Duplicar elementos","finalizingDrawingTitle":"A processar a geometria..."}

package/assets/esri/widgets/Sketch/t9n/Sketch_ro.json

@@ -1 +1 @@
-{"widgetLabel":"Schiță","undo":"Anulare","redo":"Refacere","draw":{"point":"Trasarea unui punct","polygon":"Desenați un poligon","polyline":"Trasați o linie poligonală","circle":"Trasați un cerc","rectangle":"Trasare dreptunghi","multipoint":"Trasați un multipunct","mesh":"Trasați o rețea","freehandPolyline":"Trasați o polilinie (liber)","freehandPolygon":"Trasați un poligon (liber)","streamPolyline":"Trasați o linie poligonală (transmisie)","streamPolygon":"Trasați un poligon (transmisie)","text":"Adăugare text"},"digitizers":{"root-point":"Trasarea unui punct","root-polygon":"Desenați un poligon","root-polyline":"Trasați o linie poligonală","root-circle":"Trasați un cerc sau o elipsă","root-rectangle":"Trasați un dreptunghi sau un pătrat","root-multipoint":"Trasați un multipunct","root-mesh":"Trasați o rețea","root-text":"Adăugare text","leaf-point":"Punct","leaf-distance-distance":"Distanță-distanță (intersecție cerc-cerc)","leaf-direction-distance":"Direcție-distanță (intersecție cerc-linie)","leaf-direction-direction":"Direcție-direcție (intersecție linie-linie)","leaf-point-segment":"Segment de linie","leaf-autocomplete":"Completare automată","leaf-right-angle":"Segment de unghi drept","leaf-freehand":"Segment manual","leaf-stream":"Segment de transmisie","leaf-tangent-arc":"Segment de curbă tangentă","leaf-circular-arc":"Segment de arc","leaf-endpoint-arc":"Segment de arc punct final","leaf-bezier":"Segment de curbă Bezier"},"partActions":{"completePart":"Parte finalizare","completeInput":"Finalizare intrare curentă","releaseManipulator":"Nu mai urmări cursorul","captureManipulator":"Urmărire cursor","completeDrawing":"Finalizare","cancelDrawing":"Anulare"},"keyboardFeedback":{"tooltip":"Viteză de deplasare tastatură: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (tastăScurtătură)"},"advancedSettings":{"keyboardInput":"Activați scurtături avansate pe tastatură"},"settings":{"toolOptionsHeading":"Ă_Drawing options________________ș","freehandSnappingEnabledTitle":"Ă_Freehand snaps when not streaming__________________ș","freehandSnappingEnabledDescription":"Ă_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________ș.","bezierEnableSplineBehaviorTitle":"Ă_Bezier draws splines_____________________ș","bezierEnableSplineBehaviorDescription":"Ă_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________ș."},"selectedCount":"Selecție: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Ă_Processing_____________________ș","finalizingDrawingHint":"Ă_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________ș.","finalizingDrawingCompleteHint":"Ă_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________ș.","deleteFeature":"Ștergere obiect spațial","deleteFeatures":"Ștergere obiecte spațiale","selectFeature":"Selectare obiect spațial","duplicateFeature":"Duplicare obiect spațial","duplicateFeatures":"Duplicare obiecte spațiale","finalizingDrawingTitle":"Ă_Processing geometry_______________________ș...","finalizingDrawingCompleteTitle":"Ă_Geometry required optimization_______________________________ș","simplificationDismiss":"Ă_Dismiss_______________ș"}
+{"widgetLabel":"Schiță","undo":"Anulare","redo":"Refacere","draw":{"point":"Trasarea unui punct","polygon":"Desenați un poligon","polyline":"Trasați o linie poligonală","circle":"Trasați un cerc","rectangle":"Trasare dreptunghi","multipoint":"Trasați un multipunct","mesh":"Trasați o rețea","freehandPolyline":"Trasați o polilinie (liber)","freehandPolygon":"Trasați un poligon (liber)","streamPolyline":"Trasați o linie poligonală (transmisie)","streamPolygon":"Trasați un poligon (transmisie)","text":"Adăugare text"},"digitizers":{"root-point":"Trasarea unui punct","root-polygon":"Desenați un poligon","root-polyline":"Trasați o linie poligonală","root-circle":"Trasați un cerc sau o elipsă","root-rectangle":"Trasați un dreptunghi sau un pătrat","root-multipoint":"Trasați un multipunct","root-mesh":"Trasați o rețea","root-text":"Adăugare text","leaf-point":"Punct","leaf-distance-distance":"Distanță-distanță (intersecție cerc-cerc)","leaf-direction-distance":"Direcție-distanță (intersecție cerc-linie)","leaf-direction-direction":"Direcție-direcție (intersecție linie-linie)","leaf-point-segment":"Segment de linie","leaf-autocomplete":"Completare automată","leaf-right-angle":"Segment de unghi drept","leaf-freehand":"Segment manual","leaf-stream":"Segment de transmisie","leaf-tangent-arc":"Segment de curbă tangentă","leaf-circular-arc":"Segment de arc","leaf-endpoint-arc":"Segment de arc punct final","leaf-bezier":"Segment de curbă Bezier"},"partActions":{"completePart":"Parte finalizare","completeInput":"Finalizare intrare curentă","releaseManipulator":"Nu mai urmări cursorul","captureManipulator":"Urmărire cursor","completeDrawing":"Finalizare","cancelDrawing":"Anulare"},"keyboardFeedback":{"tooltip":"Viteză de deplasare tastatură: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (tastăScurtătură)"},"advancedSettings":{"keyboardInput":"Activați scurtături avansate pe tastatură"},"settings":{"toolOptionsHeading":"Opțiuni de trasare","freehandSnappingEnabledTitle":"Fixare cu mâna liberă atunci când nu se difuzează","freehandSnappingEnabledDescription":"Când este activat, instrumentul Segment manual aplică fixarea atunci când nu glisați în mod activ.","bezierEnableSplineBehaviorTitle":"Funcții polinomiale de trasări Bezier","bezierEnableSplineBehaviorDescription":"Când este activat, instrumentul Segment Bezier deduce primul punct de control al fiecărui segment ulterior din segmentul anterior."},"selectedCount":"Selecție: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"În curs de procesare","finalizingDrawingHint":"Trasarea dvs. este simplificată pentru performanță și compatibilitate. Pentru procesare mai rapidă, evitați segmentele auto-intersectate și suprapuse.","finalizingDrawingCompleteHint":"Trasarea creată anterior a necesitat simplificare pentru performanță și compatibilitate. Pentru a evita acest pas în viitor, nu trasați poligoane cu secțiuni suprapuse sau auto-intersectate.","deleteFeature":"Ștergere obiect spațial","deleteFeatures":"Ștergere obiecte spațiale","selectFeature":"Selectare obiect spațial","duplicateFeature":"Duplicare obiect spațial","duplicateFeatures":"Duplicare obiecte spațiale","finalizingDrawingTitle":"Se procesează geometria..."}

package/assets/esri/widgets/Sketch/t9n/Sketch_ru.json

@@ -1 +1 @@
-{"widgetLabel":"Скетч","undo":"Отменить","redo":"Повторить","draw":{"point":"Нарисовать точку","polygon":"Нарисовать полигон","polyline":"Нарисовать полилинию","circle":"Нарисовать окружность","rectangle":"Нарисовать прямоугольник","multipoint":"Нарисовать мультиточку","mesh":"Нарисовать модель mesh","freehandPolyline":"Нарисовать полилинию (произвольную)","freehandPolygon":"Нарисовать полигон (произвольный)","streamPolyline":"Нарисовать полилинию (потоковую)","streamPolygon":"Нарисовать полигон (потоковый)","text":"Добавить текст"},"digitizers":{"root-point":"Нарисовать точку","root-polygon":"Нарисовать полигон","root-polyline":"Нарисовать полилинию","root-circle":"Нарисовать окружность или эллипс","root-rectangle":"Нарисовать прямоугольник или квадрат","root-multipoint":"Нарисовать мультиточку","root-mesh":"Нарисовать модель mesh","root-text":"Добавить текст","leaf-point":"Точка","leaf-distance-distance":"Расстояние-расстояние (пересечение окружность-окружность)","leaf-direction-distance":"Направление-Расстояние (пересечение окружность-линия)","leaf-direction-direction":"Направление-Направление (пересечение линия-линия)","leaf-point-segment":"Линейный сегмент","leaf-autocomplete":"Автозавершение","leaf-right-angle":"Сегмент с прямым углом","leaf-freehand":"Сегмент произвольной линии","leaf-stream":"Потоковый сегмент","leaf-tangent-arc":"Сегмент касательной кривой","leaf-circular-arc":"Сегмент дуги","leaf-endpoint-arc":"Сегмент дуги конечной точки","leaf-bezier":"Сегмент параметрической кривой"},"partActions":{"completePart":"Завершить часть","completeInput":"Завершить текущий ввод","releaseManipulator":"Остановить следование за курсором","captureManipulator":"Следовать курсору","completeDrawing":"Завершить","cancelDrawing":"Отмена"},"keyboardFeedback":{"tooltip":"Скорость перемещения клавиатуры: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Включить дополнительные клавиши быстрого доступа"},"settings":{"toolOptionsHeading":"Ж_Drawing options________________Я","freehandSnappingEnabledTitle":"Ж_Freehand snaps when not streaming__________________Я","freehandSnappingEnabledDescription":"Ж_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________Я.","bezierEnableSplineBehaviorTitle":"Ж_Bezier draws splines_____________________Я","bezierEnableSplineBehaviorDescription":"Ж_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________Я."},"selectedCount":"Выборка: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Ж_Processing_____________________Я","finalizingDrawingHint":"Ж_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________Я.","finalizingDrawingCompleteHint":"Ж_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________Я.","deleteFeature":"Удалить объект","deleteFeatures":"Удаление объектов","selectFeature":"Выбрать объект","duplicateFeature":"Дублировать объект","duplicateFeatures":"Дублировать объекты","finalizingDrawingTitle":"Ж_Processing geometry_______________________Я...","finalizingDrawingCompleteTitle":"Ж_Geometry required optimization_______________________________Я","simplificationDismiss":"Ж_Dismiss_______________Я"}
+{"widgetLabel":"Скетч","undo":"Отменить","redo":"Повторить","draw":{"point":"Нарисовать точку","polygon":"Нарисовать полигон","polyline":"Нарисовать полилинию","circle":"Нарисовать окружность","rectangle":"Нарисовать прямоугольник","multipoint":"Нарисовать мультиточку","mesh":"Нарисовать модель mesh","freehandPolyline":"Нарисовать полилинию (произвольную)","freehandPolygon":"Нарисовать полигон (произвольный)","streamPolyline":"Нарисовать полилинию (потоковую)","streamPolygon":"Нарисовать полигон (потоковый)","text":"Добавить текст"},"digitizers":{"root-point":"Нарисовать точку","root-polygon":"Нарисовать полигон","root-polyline":"Нарисовать полилинию","root-circle":"Нарисовать окружность или эллипс","root-rectangle":"Нарисовать прямоугольник или квадрат","root-multipoint":"Нарисовать мультиточку","root-mesh":"Нарисовать модель mesh","root-text":"Добавить текст","leaf-point":"Точка","leaf-distance-distance":"Расстояние-расстояние (пересечение окружность-окружность)","leaf-direction-distance":"Направление-Расстояние (пересечение окружность-линия)","leaf-direction-direction":"Направление-Направление (пересечение линия-линия)","leaf-point-segment":"Линейный сегмент","leaf-autocomplete":"Автозавершение","leaf-right-angle":"Сегмент с прямым углом","leaf-freehand":"Сегмент произвольной линии","leaf-stream":"Потоковый сегмент","leaf-tangent-arc":"Сегмент касательной кривой","leaf-circular-arc":"Сегмент дуги","leaf-endpoint-arc":"Сегмент дуги конечной точки","leaf-bezier":"Сегмент параметрической кривой"},"partActions":{"completePart":"Завершить часть","completeInput":"Завершить текущий ввод","releaseManipulator":"Остановить следование за курсором","captureManipulator":"Следовать курсору","completeDrawing":"Завершить","cancelDrawing":"Отмена"},"keyboardFeedback":{"tooltip":"Скорость перемещения клавиатуры: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Включить дополнительные клавиши быстрого доступа"},"settings":{"toolOptionsHeading":"Опции отображения","freehandSnappingEnabledTitle":"Произвольная линия замыкается вне режима потоковой передачи","freehandSnappingEnabledDescription":"Если опция включена, инструмент Сегмент произвольной линии использует замыкание, пока пользователь не выполняет перетаскивание.","bezierEnableSplineBehaviorTitle":"Безье создает сплайны","bezierEnableSplineBehaviorDescription":"Если опция включена, инструмент Сегмент Безье определяет первую контрольную точку каждого следующего сегмента на основе предыдущего сегмента."},"selectedCount":"Выборка: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Обработка","finalizingDrawingHint":"Ваш чертеж упрощается для повышения производительности и совместимости. Чтобы ускорить обработку, избегайте самопересекающихся и перекрывающихся сегментов.","finalizingDrawingCompleteHint":"Созданный ранее чертеж потребовал упрощения для повышения производительности и совместимости. Чтобы избежать этого шага в будущем, не создавайте полигоны с перекрывающимися и самопересекающимися участками.","deleteFeature":"Удалить объект","deleteFeatures":"Удаление объектов","selectFeature":"Выбрать объект","duplicateFeature":"Дублировать объект","duplicateFeatures":"Дублировать объекты","finalizingDrawingTitle":"Обработка геометрии..."}

package/assets/esri/widgets/Sketch/t9n/Sketch_sk.json

@@ -1 +1 @@
-{"widgetLabel":"Skica","undo":"Späť","redo":"Znova","draw":{"point":"Nakresliť bod","polygon":"Nakresliť polygón","polyline":"Nakresliť líniu","circle":"Nakresliť kruh","rectangle":"Nakresliť pravouholník","multipoint":"Nakresliť multibod","mesh":"Nakresliť mriežku","freehandPolyline":"Nakresliť líniu (voľnou rukou)","freehandPolygon":"Nakresliť polygón (voľnou rukou)","streamPolyline":"Nakresliť líniu (stream)","streamPolygon":"Nakresliť polygón (stream)","text":"Pridať text"},"digitizers":{"root-point":"Nakresliť bod","root-polygon":"Nakresliť polygón","root-polyline":"Nakresliť líniu","root-circle":"Nakresliť kruh alebo elipsu","root-rectangle":"Nakresliť pravouholník alebo štvorec","root-multipoint":"Nakresliť multibod","root-mesh":"Nakresliť mriežku","root-text":"Pridať text","leaf-point":"Bod","leaf-distance-distance":"Vzdialenosť-vzdialenosť (priesečník kruh-kruh)","leaf-direction-distance":"Vzdialenosť-vzdialenosť (priesečník kruh-priamka)","leaf-direction-direction":"Vzdialenosť-vzdialenosť (priesečník priamka-priamka)","leaf-point-segment":"Líniový segment","leaf-autocomplete":"Automatické dokončovanie","leaf-right-angle":"Segment pravého uhla","leaf-freehand":"Segment voľnej ruky","leaf-stream":"Streamovať segment","leaf-tangent-arc":"Segment dotyčnice krivky","leaf-circular-arc":"Segment oblúka","leaf-endpoint-arc":"Segment rozhrania oblúka","leaf-bezier":"Segment Bézierovej krivky"},"partActions":{"completePart":"Dokončiť časť","completeInput":"Dokončiť aktuálny vstup","releaseManipulator":"Zastaviť sledovanie kurzoru","captureManipulator":"Sledovať kurzor","completeDrawing":"Dokončiť","cancelDrawing":"Zrušiť"},"keyboardFeedback":{"tooltip":"Rýchlosť pohybu klávesnice: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Povoliť pokročilé klávesové skratky"},"settings":{"toolOptionsHeading":"ĺ_Drawing options________________ľ","freehandSnappingEnabledTitle":"ĺ_Freehand snaps when not streaming__________________ľ","freehandSnappingEnabledDescription":"ĺ_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________ľ.","bezierEnableSplineBehaviorTitle":"ĺ_Bezier draws splines_____________________ľ","bezierEnableSplineBehaviorDescription":"ĺ_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________ľ."},"selectedCount":"Výber: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"ĺ_Processing_____________________ľ","finalizingDrawingHint":"ĺ_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________ľ.","finalizingDrawingCompleteHint":"ĺ_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________ľ.","deleteFeature":"Zmazať prvok","deleteFeatures":"Zmazať prvky","selectFeature":"Vybrať prvok","duplicateFeature":"Duplikovať prvok","duplicateFeatures":"Duplikovať prvky","finalizingDrawingTitle":"ĺ_Processing geometry_______________________ľ...","finalizingDrawingCompleteTitle":"ĺ_Geometry required optimization_______________________________ľ","simplificationDismiss":"ĺ_Dismiss_______________ľ"}
+{"widgetLabel":"Skica","undo":"Späť","redo":"Znova","draw":{"point":"Nakresliť bod","polygon":"Nakresliť polygón","polyline":"Nakresliť líniu","circle":"Nakresliť kruh","rectangle":"Nakresliť pravouholník","multipoint":"Nakresliť multibod","mesh":"Nakresliť mriežku","freehandPolyline":"Nakresliť líniu (voľnou rukou)","freehandPolygon":"Nakresliť polygón (voľnou rukou)","streamPolyline":"Nakresliť líniu (stream)","streamPolygon":"Nakresliť polygón (stream)","text":"Pridať text"},"digitizers":{"root-point":"Nakresliť bod","root-polygon":"Nakresliť polygón","root-polyline":"Nakresliť líniu","root-circle":"Nakresliť kruh alebo elipsu","root-rectangle":"Nakresliť pravouholník alebo štvorec","root-multipoint":"Nakresliť multibod","root-mesh":"Nakresliť mriežku","root-text":"Pridať text","leaf-point":"Bod","leaf-distance-distance":"Vzdialenosť-vzdialenosť (priesečník kruh-kruh)","leaf-direction-distance":"Vzdialenosť-vzdialenosť (priesečník kruh-priamka)","leaf-direction-direction":"Vzdialenosť-vzdialenosť (priesečník priamka-priamka)","leaf-point-segment":"Líniový segment","leaf-autocomplete":"Automatické dokončovanie","leaf-right-angle":"Segment pravého uhla","leaf-freehand":"Segment voľnej ruky","leaf-stream":"Streamovať segment","leaf-tangent-arc":"Segment dotyčnice krivky","leaf-circular-arc":"Segment oblúka","leaf-endpoint-arc":"Segment rozhrania oblúka","leaf-bezier":"Segment Bézierovej krivky"},"partActions":{"completePart":"Dokončiť časť","completeInput":"Dokončiť aktuálny vstup","releaseManipulator":"Zastaviť sledovanie kurzoru","captureManipulator":"Sledovať kurzor","completeDrawing":"Dokončiť","cancelDrawing":"Zrušiť"},"keyboardFeedback":{"tooltip":"Rýchlosť pohybu klávesnice: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Povoliť pokročilé klávesové skratky"},"settings":{"toolOptionsHeading":"Možnosti kreslenia","freehandSnappingEnabledTitle":"Voľná kresba sa prichytáva mimo režimu streamovania","freehandSnappingEnabledDescription":"Po povolení nástroj na voľnú kresbu segmentov používa prichytávanie, keď práve nekreslíte ťahaním.","bezierEnableSplineBehaviorTitle":"Bézier používa spline krivky","bezierEnableSplineBehaviorDescription":"Ak je táto možnosť povolená, nástroj Bézier segmentu odvodí prvý kontrolný bod každého nasledujúceho segmentu z predchádzajúceho segmentu."},"selectedCount":"Výber: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Spracováva sa","finalizingDrawingHint":"Vaša kresba sa zjednodušuje na zlepšenie výkonu a kompatibility. Na rýchlejšie spracovanie sa vyhnite samopretínajúcim sa a prekrývajúcim sa segmentom.","finalizingDrawingCompleteHint":"Kresba vytvorená vyžadovala zjednodušenie na zlepšenie výkonu a kompatibility. Ak sa chcete tomuto kroku v budúcnosti vyhnúť, nekreslite polygóny s prekrývajúcimi sa a samopretínajúcimi sa časťami.","deleteFeature":"Zmazať prvok","deleteFeatures":"Zmazať prvky","selectFeature":"Vybrať prvok","duplicateFeature":"Duplikovať prvok","duplicateFeatures":"Duplikovať prvky","finalizingDrawingTitle":"Spracováva sa geometria..."}

package/assets/esri/widgets/Sketch/t9n/Sketch_sl.json

@@ -1 +1 @@
-{"widgetLabel":"Skiciraj","undo":"Razveljavi","redo":"Uveljavi","draw":{"point":"Nariši točko","polygon":"Nariši poligon","polyline":"Nariši polilinijo","circle":"Nariši krog","rectangle":"Nariši pravokotnik","multipoint":"Nariši mnogotočko","mesh":"Nariši mrežo","freehandPolyline":"Nariši polilinijo (prostoročno)","freehandPolygon":"Nariši poligon (prostoročno)","streamPolyline":"Nariši polilinijo (pretok)","streamPolygon":"Nariši poligon (pretok)","text":"Dodaj besedilo"},"digitizers":{"root-point":"Nariši točko","root-polygon":"Nariši poligon","root-polyline":"Nariši polilinijo","root-circle":"Nariši krog ali elipso","root-rectangle":"Nariši pravokotnik ali kvadrat","root-multipoint":"Nariši mnogotočko","root-mesh":"Nariši mrežo","root-text":"Dodaj besedilo","leaf-point":"Točka","leaf-distance-distance":"Razdalja-razdalja (presek krog-krog)","leaf-direction-distance":"Smer-razdalja (presek krog-linija)","leaf-direction-direction":"Smer-smer (presek linija-linija)","leaf-point-segment":"Segment linije","leaf-autocomplete":"Samodejno izpolnjevanje","leaf-right-angle":"Odsek desnega kota","leaf-freehand":"Prostoročni odsek","leaf-stream":"Odsek pretoka","leaf-tangent-arc":"Odsek tangentne krivulje","leaf-circular-arc":"Odsek loka","leaf-endpoint-arc":"Odsek loka končne točke","leaf-bezier":"Odsek Bezierove krivulje"},"partActions":{"completePart":"Končaj del","completeInput":"Končaj trenutni vnos","releaseManipulator":"Prekini spremljanje kazalca","captureManipulator":"Sledi kazalcu","completeDrawing":"Končaj","cancelDrawing":"Prekliči"},"keyboardFeedback":{"tooltip":"Hitrost premikanja tipkovnice: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Omogoči napredne bližnjice na tipkovnici"},"settings":{"toolOptionsHeading":"Š_Drawing options________________č","freehandSnappingEnabledTitle":"Š_Freehand snaps when not streaming__________________č","freehandSnappingEnabledDescription":"Š_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________č.","bezierEnableSplineBehaviorTitle":"Š_Bezier draws splines_____________________č","bezierEnableSplineBehaviorDescription":"Š_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________č."},"selectedCount":"Izbira: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Š_Processing_____________________č","finalizingDrawingHint":"Š_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________č.","finalizingDrawingCompleteHint":"Š_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________č.","deleteFeature":"Izbriši geoobjekt","deleteFeatures":"Izbriši geoobjekte","selectFeature":"Izberi geoobjekt","duplicateFeature":"Podvoji geoobjekt","duplicateFeatures":"Podvoji geoobjekte","finalizingDrawingTitle":"Š_Processing geometry_______________________č...","finalizingDrawingCompleteTitle":"Š_Geometry required optimization_______________________________č","simplificationDismiss":"Š_Dismiss_______________č"}
+{"widgetLabel":"Skiciraj","undo":"Razveljavi","redo":"Uveljavi","draw":{"point":"Nariši točko","polygon":"Nariši poligon","polyline":"Nariši polilinijo","circle":"Nariši krog","rectangle":"Nariši pravokotnik","multipoint":"Nariši mnogotočko","mesh":"Nariši mrežo","freehandPolyline":"Nariši polilinijo (prostoročno)","freehandPolygon":"Nariši poligon (prostoročno)","streamPolyline":"Nariši polilinijo (pretok)","streamPolygon":"Nariši poligon (pretok)","text":"Dodaj besedilo"},"digitizers":{"root-point":"Nariši točko","root-polygon":"Nariši poligon","root-polyline":"Nariši polilinijo","root-circle":"Nariši krog ali elipso","root-rectangle":"Nariši pravokotnik ali kvadrat","root-multipoint":"Nariši mnogotočko","root-mesh":"Nariši mrežo","root-text":"Dodaj besedilo","leaf-point":"Točka","leaf-distance-distance":"Razdalja-razdalja (presek krog-krog)","leaf-direction-distance":"Smer-razdalja (presek krog-linija)","leaf-direction-direction":"Smer-smer (presek linija-linija)","leaf-point-segment":"Segment linije","leaf-autocomplete":"Samodejno izpolnjevanje","leaf-right-angle":"Odsek desnega kota","leaf-freehand":"Prostoročni odsek","leaf-stream":"Odsek pretoka","leaf-tangent-arc":"Odsek tangentne krivulje","leaf-circular-arc":"Odsek loka","leaf-endpoint-arc":"Odsek loka končne točke","leaf-bezier":"Odsek Bezierove krivulje"},"partActions":{"completePart":"Končaj del","completeInput":"Končaj trenutni vnos","releaseManipulator":"Prekini spremljanje kazalca","captureManipulator":"Sledi kazalcu","completeDrawing":"Končaj","cancelDrawing":"Prekliči"},"keyboardFeedback":{"tooltip":"Hitrost premikanja tipkovnice: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Omogoči napredne bližnjice na tipkovnici"},"settings":{"toolOptionsHeading":"Možnosti risanja","freehandSnappingEnabledTitle":"Prostoročni hitri preklop, ko ni pretakanja","freehandSnappingEnabledDescription":"Ko je omogočeno, orodje za prosti segment uporabi hitri preklop, medtem ko ni aktivnega vlečenja.","bezierEnableSplineBehaviorTitle":"Bezier riše polinomske krivulje","bezierEnableSplineBehaviorDescription":"Ko je omogočeno, orodje za Bezierjev odsek sklepa o prvi kontrolni točki vsakega naslednjega segmenta na podlagi prejšnjega segmenta."},"selectedCount":"Izbira: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Procesiranje","finalizingDrawingHint":"Vaša risba je poenostavljena za delovanje in združljivost. Za hitrejše procesiranje se izogibajte samopresečnim in prekrivajočim se segmentom.","finalizingDrawingCompleteHint":"Prej ustvarjena risba je zahtevala poenostavitev zaradi delovanja in združljivosti. Da bi se temu koraku v prihodnje izognili, ne rišite poligonov s prekrivajočimi se in samopresečnimi razdelki.","deleteFeature":"Izbriši geoobjekt","deleteFeatures":"Izbriši geoobjekte","selectFeature":"Izberi geoobjekt","duplicateFeature":"Podvoji geoobjekt","duplicateFeatures":"Podvoji geoobjekte","finalizingDrawingTitle":"Procesiranje geomerije ..."}

package/assets/esri/widgets/Sketch/t9n/Sketch_sr.json

@@ -1 +1 @@
-{"widgetLabel":"Skiciraj","undo":"Opozovi radnju","redo":"Ponovi radnju","draw":{"point":"Nacrtaj tačku","polygon":"Nacrtajte poligon","polyline":"Nacrtaj poliliniju","circle":"Nacrtaj krug","rectangle":"Nacrtaj pravougaonik","multipoint":"Nacrtaj više tačaka","mesh":"Nacrtaj mrežu","freehandPolyline":"Nacrtajte poliliniju (slobodnom rukom)","freehandPolygon":"Nacrtajte poligon (slobodnom rukom)","streamPolyline":"Nacrtaj poliliniju (strim)","streamPolygon":"Nacrtaj poligon (strim)","text":"Dodaj tekst"},"digitizers":{"root-point":"Nacrtaj tačku","root-polygon":"Nacrtajte poligon","root-polyline":"Nacrtaj poliliniju","root-circle":"Nacrtaj krug ili elipsu","root-rectangle":"Nacrtaj pravougaonik ili kvadrat","root-multipoint":"Nacrtaj više tačaka","root-mesh":"Nacrtaj mrežu","root-text":"Dodaj tekst","leaf-point":"Tačka","leaf-distance-distance":"Rastojanje-rastojanje (presek krug-krug)","leaf-direction-distance":"Smer-rastojanje (presek krug-linija)","leaf-direction-direction":"Smer-smer (presek linija-linija)","leaf-point-segment":"Segment linije","leaf-autocomplete":"Automatsko popunjavanje","leaf-right-angle":"Segment desnog ugla","leaf-freehand":"Segment crtan slobodnom rukom","leaf-stream":"Segment strima","leaf-tangent-arc":"Segment tangentne krive","leaf-circular-arc":"Segment luka","leaf-endpoint-arc":"Segment luka krajnje tačke","leaf-bezier":"Segment Bezjeove krive"},"partActions":{"completePart":"Završi deo","completeInput":"Završi trenutni unos","releaseManipulator":"Prestani da pratiš kursor","captureManipulator":"Prati kursor","completeDrawing":"Završi","cancelDrawing":"Otkaži"},"keyboardFeedback":{"tooltip":"Brzina kretanja tastature: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (taster prečice)"},"advancedSettings":{"keyboardInput":"Omogući napredne prečice na tastaturi"},"settings":{"toolOptionsHeading":"Č_Drawing options________________ž","freehandSnappingEnabledTitle":"Č_Freehand snaps when not streaming__________________ž","freehandSnappingEnabledDescription":"Č_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________ž.","bezierEnableSplineBehaviorTitle":"Č_Bezier draws splines_____________________ž","bezierEnableSplineBehaviorDescription":"Č_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________ž."},"selectedCount":"Odabir: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Č_Processing_____________________ž","finalizingDrawingHint":"Č_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________ž.","finalizingDrawingCompleteHint":"Č_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________ž.","deleteFeature":"Obriši geoobjekat","deleteFeatures":"Obriši geoobjekte","selectFeature":"Izaberite geoobjekat","duplicateFeature":"Duplirani geoobjekat","duplicateFeatures":"Duplirani geoobjekti","finalizingDrawingTitle":"Č_Processing geometry_______________________ž...","finalizingDrawingCompleteTitle":"Č_Geometry required optimization_______________________________ž","simplificationDismiss":"Č_Dismiss_______________ž"}
+{"widgetLabel":"Skiciraj","undo":"Opozovi radnju","redo":"Ponovi radnju","draw":{"point":"Nacrtaj tačku","polygon":"Nacrtajte poligon","polyline":"Nacrtaj poliliniju","circle":"Nacrtaj krug","rectangle":"Nacrtaj pravougaonik","multipoint":"Nacrtaj više tačaka","mesh":"Nacrtaj mrežu","freehandPolyline":"Nacrtajte poliliniju (slobodnom rukom)","freehandPolygon":"Nacrtajte poligon (slobodnom rukom)","streamPolyline":"Nacrtaj poliliniju (strim)","streamPolygon":"Nacrtaj poligon (strim)","text":"Dodaj tekst"},"digitizers":{"root-point":"Nacrtaj tačku","root-polygon":"Nacrtajte poligon","root-polyline":"Nacrtaj poliliniju","root-circle":"Nacrtaj krug ili elipsu","root-rectangle":"Nacrtaj pravougaonik ili kvadrat","root-multipoint":"Nacrtaj više tačaka","root-mesh":"Nacrtaj mrežu","root-text":"Dodaj tekst","leaf-point":"Tačka","leaf-distance-distance":"Rastojanje-rastojanje (presek krug-krug)","leaf-direction-distance":"Smer-rastojanje (presek krug-linija)","leaf-direction-direction":"Smer-smer (presek linija-linija)","leaf-point-segment":"Segment linije","leaf-autocomplete":"Automatsko popunjavanje","leaf-right-angle":"Segment desnog ugla","leaf-freehand":"Segment crtan slobodnom rukom","leaf-stream":"Segment strima","leaf-tangent-arc":"Segment tangentne krive","leaf-circular-arc":"Segment luka","leaf-endpoint-arc":"Segment luka krajnje tačke","leaf-bezier":"Segment Bezjeove krive"},"partActions":{"completePart":"Završi deo","completeInput":"Završi trenutni unos","releaseManipulator":"Prestani da pratiš kursor","captureManipulator":"Prati kursor","completeDrawing":"Završi","cancelDrawing":"Otkaži"},"keyboardFeedback":{"tooltip":"Brzina kretanja tastature: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (taster prečice)"},"advancedSettings":{"keyboardInput":"Omogući napredne prečice na tastaturi"},"settings":{"toolOptionsHeading":"Opcije crtanja","freehandSnappingEnabledTitle":"Crtanje slobodnom rukom se kači kada nema striminga","freehandSnappingEnabledDescription":"Kada je ovo omogućeno, alatka za crtanje segmenta slobodnom rukom primenjuje kačenje dok nema aktivnog povlačenja.","bezierEnableSplineBehaviorTitle":"Splajnovi Bezjeovog crteža","bezierEnableSplineBehaviorDescription":"Kada je ovo omogućeno, alatka za Bezjeov segment zaključuje prvu kontrolnu tačku svakog sledećeg segmenta iz prethodnog segmenta."},"selectedCount":"Odabir: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Obrada","finalizingDrawingHint":"Vaš crtež se pojednostavljuje zbog boljih performansi i kompatibilnosti. Za bržu obradu, izbegavajte samopresecajuće i preklapajuće segmente","finalizingDrawingCompleteHint":"Crtež koji je ranije kreiran zahteva pojednostavljivanje zbog boljih performansi i kompatibilnosti. Da biste izbegli ovaj korak u budućnosti, nemojte da crtate poligone sa preklapajućim i samopresecajućim odeljcima.","deleteFeature":"Obriši geoobjekat","deleteFeatures":"Obriši geoobjekte","selectFeature":"Izaberite geoobjekat","duplicateFeature":"Duplirani geoobjekat","duplicateFeatures":"Duplirani geoobjekti","finalizingDrawingTitle":"Obrada geometrije..."}

package/assets/esri/widgets/Sketch/t9n/Sketch_sv.json

@@ -1 +1 @@
-{"widgetLabel":"Skiss","undo":"Ångra","redo":"Upprepa","draw":{"point":"Rita en punkt","polygon":"Rita en polygon","polyline":"Rita en polylinje","circle":"Rita en cirkel","rectangle":"Rita en rektangel","multipoint":"Rita en multipunkt","mesh":"Rita ett rutnät","freehandPolyline":"Rita en polylinje (frihand)","freehandPolygon":"Rita en polygon (frihand)","streamPolyline":"Rita en polylinje (ström)","streamPolygon":"Rita en polygon (ström)","text":"Lägg till text"},"digitizers":{"root-point":"Rita en punkt","root-polygon":"Rita en polygon","root-polyline":"Rita en polylinje","root-circle":"Rita en cirkel eller ellips","root-rectangle":"Rita en rektangel eller kvadrat","root-multipoint":"Rita en multipunkt","root-mesh":"Rita ett rutnät","root-text":"Lägg till text","leaf-point":"Punkt","leaf-distance-distance":"Avstånd-avstånd (cirkel-cirkelkorsning)","leaf-direction-distance":"Riktning-avstånd (cirkel-linjekorsning)","leaf-direction-direction":"Riktning-riktning (linje-linjekorsning)","leaf-point-segment":"Linjesegment","leaf-autocomplete":"Komplettera automatiskt","leaf-right-angle":"Segment för rät vinkel","leaf-freehand":"Frihandssegment","leaf-stream":"Strömningssegment","leaf-tangent-arc":"Tangentkurvsegment","leaf-circular-arc":"Bågsegment","leaf-endpoint-arc":"Slutpunktsbågsegment","leaf-bezier":"Bezier-kurvsegment"},"partActions":{"completePart":"Slutför del","completeInput":"Slutför aktuella indata","releaseManipulator":"Sluta följa markören","captureManipulator":"Följ markör","completeDrawing":"Slutför","cancelDrawing":"Avbryt"},"keyboardFeedback":{"tooltip":"Tangentbordets rörelsehastighet: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Aktivera avancerade kortkommandon"},"settings":{"toolOptionsHeading":"Å_Drawing options________________ö","freehandSnappingEnabledTitle":"Å_Freehand snaps when not streaming__________________ö","freehandSnappingEnabledDescription":"Å_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________ö.","bezierEnableSplineBehaviorTitle":"Å_Bezier draws splines_____________________ö","bezierEnableSplineBehaviorDescription":"Å_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________ö."},"selectedCount":"Val: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Å_Processing_____________________ö","finalizingDrawingHint":"Å_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________ö.","finalizingDrawingCompleteHint":"Å_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________ö.","deleteFeature":"Ta bort objekt","deleteFeatures":"Ta bort geoobjekt","selectFeature":"Välj geoobjekt","duplicateFeature":"Dubblerat geoobjekt","duplicateFeatures":"Dubblerade geoobjekt","finalizingDrawingTitle":"Å_Processing geometry_______________________ö...","finalizingDrawingCompleteTitle":"Å_Geometry required optimization_______________________________ö","simplificationDismiss":"Å_Dismiss_______________ö"}
+{"widgetLabel":"Skiss","undo":"Ångra","redo":"Upprepa","draw":{"point":"Rita en punkt","polygon":"Rita en polygon","polyline":"Rita en polylinje","circle":"Rita en cirkel","rectangle":"Rita en rektangel","multipoint":"Rita en multipunkt","mesh":"Rita ett rutnät","freehandPolyline":"Rita en polylinje (frihand)","freehandPolygon":"Rita en polygon (frihand)","streamPolyline":"Rita en polylinje (ström)","streamPolygon":"Rita en polygon (ström)","text":"Lägg till text"},"digitizers":{"root-point":"Rita en punkt","root-polygon":"Rita en polygon","root-polyline":"Rita en polylinje","root-circle":"Rita en cirkel eller ellips","root-rectangle":"Rita en rektangel eller kvadrat","root-multipoint":"Rita en multipunkt","root-mesh":"Rita ett rutnät","root-text":"Lägg till text","leaf-point":"Punkt","leaf-distance-distance":"Avstånd-avstånd (cirkel-cirkelkorsning)","leaf-direction-distance":"Riktning-avstånd (cirkel-linjekorsning)","leaf-direction-direction":"Riktning-riktning (linje-linjekorsning)","leaf-point-segment":"Linjesegment","leaf-autocomplete":"Komplettera automatiskt","leaf-right-angle":"Segment för rät vinkel","leaf-freehand":"Frihandssegment","leaf-stream":"Strömningssegment","leaf-tangent-arc":"Tangentkurvsegment","leaf-circular-arc":"Bågsegment","leaf-endpoint-arc":"Slutpunktsbågsegment","leaf-bezier":"Bezier-kurvsegment"},"partActions":{"completePart":"Slutför del","completeInput":"Slutför aktuella indata","releaseManipulator":"Sluta följa markören","captureManipulator":"Följ markör","completeDrawing":"Slutför","cancelDrawing":"Avbryt"},"keyboardFeedback":{"tooltip":"Tangentbordets rörelsehastighet: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"Aktivera avancerade kortkommandon"},"settings":{"toolOptionsHeading":"Ritalternativ","freehandSnappingEnabledTitle":"Frihand snappar när den inte strömmar","freehandSnappingEnabledDescription":"När det är aktiverat tillämpar frihandssegmentverktyget snappning medan det inte drar aktivt.","bezierEnableSplineBehaviorTitle":"Bezier ritar splines","bezierEnableSplineBehaviorDescription":"När det är aktiverat härleder Bezier-segmentverktyget den första kontrollpunkten för varje efterföljande segment från det föregående segmentet."},"selectedCount":"Val: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"Bearbetar","finalizingDrawingHint":"Din ritning förenklas för prestanda och kompatibilitet. Undvik segment som korsar sig själva och överlappande segment för snabbare bearbetning.","finalizingDrawingCompleteHint":"Ritningen som skapats tidigare kräver förenkling för prestanda och kompatibilitet. Rita inte polygoner med överlappande sektioner och sektioner som korsar sig själva för att undvika det här steget i framtiden.","deleteFeature":"Ta bort objekt","deleteFeatures":"Ta bort geoobjekt","selectFeature":"Välj geoobjekt","duplicateFeature":"Dubblerat geoobjekt","duplicateFeatures":"Dubblerade geoobjekt","finalizingDrawingTitle":"Bearbetar geometri..."}

package/assets/esri/widgets/Sketch/t9n/Sketch_th.json

@@ -1 +1 @@
-{"widgetLabel":"วาด","undo":"ย้อนกลับ","redo":"ทำซ้ำ","draw":{"point":"วาดจุดหนึ่งจุด","polygon":"วาดรูปหลายเหลี่ยม","polyline":"วาดเส้นหลายรูปแบบ","circle":"วาดวงกลม","rectangle":"วาดสี่เหลี่ยมผืนผ้าหนึ่งอัน","multipoint":"วาดมัลติพอยท์","mesh":"วาดตาข่าย","freehandPolyline":"วาดเส้นหลายรูปแบบ (ด้วยมือ)","freehandPolygon":"วาดรูปหลายเหลี่ยม (ด้วยมือ)","streamPolyline":"วาดเส้นหลายรูปแบบ (ลำน้ำ)","streamPolygon":"วาดรูปหลายเหลี่ยม (ลำน้ำ)","text":"เพิ่มข้อความ"},"digitizers":{"root-point":"วาดจุดหนึ่งจุด","root-polygon":"วาดรูปหลายเหลี่ยม","root-polyline":"วาดเส้นหลายรูปแบบ","root-circle":"วาดวงกลมหรือวงรี","root-rectangle":"วาดสี่เหลี่ยมผืนผ้าหรือสี่เหลี่ยมจัตุรัส","root-multipoint":"วาดมัลติพอยท์","root-mesh":"วาดตาข่าย","root-text":"เพิ่มข้อความ","leaf-point":"จุด","leaf-distance-distance":"ระยะทาง-ระยะทาง (จุดตัดวงกลม-วงกลม)","leaf-direction-distance":"ระยะทาง-ระยะทาง (จุดตัดวงกลม-เส้น)","leaf-direction-direction":"ระยะทาง-ระยะทาง (จุดตัดเส้น-เส้น)","leaf-point-segment":"ส่วนย่อยของเส้น","leaf-autocomplete":"เติมอัตโนมัติ","leaf-right-angle":"ส่วนย่อยของฉากด้านขวา","leaf-freehand":"ส่วนย่อยวาดอิสระ","leaf-stream":"ส่วนย่อยลำน้ำ","leaf-tangent-arc":"ส่วนย่อยเส้นโค้งแทนเจนต์","leaf-circular-arc":"ส่วนย่อยเส้นโค้ง","leaf-endpoint-arc":"ส่วนย่อยเส้นโค้งปลายทาง","leaf-bezier":"ส่วนย่อยเส้นโค้ง Bezier"},"partActions":{"completePart":"เสร็จสิ้นส่วน","completeInput":"เสร็จสิ้นอินพุตปัจจุบัน","releaseManipulator":"หยุดการติดตามเคอร์เซอร์","captureManipulator":"ติดตามเคอร์เซอร์","completeDrawing":"สิ้นสุด","cancelDrawing":"ยกเลิก"},"keyboardFeedback":{"tooltip":"ความเร็วการเคลื่อนที่แป้นพิมพ์: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"เปิดใช้งานแป้นพิมพ์ลัดขั้นสูง"},"settings":{"toolOptionsHeading":"ก้_Drawing options________________ษฺ","freehandSnappingEnabledTitle":"ก้_Freehand snaps when not streaming__________________ษฺ","freehandSnappingEnabledDescription":"ก้_When enabled, the Freehand segment tool applies snapping while not actively dragging____________________________________________ษฺ.","bezierEnableSplineBehaviorTitle":"ก้_Bezier draws splines_____________________ษฺ","bezierEnableSplineBehaviorDescription":"ก้_When enabled, the Bezier segment tool infers the first control point of each subsequent segment from the previous segment______________________________________________________________ษฺ."},"selectedCount":"การเลือก: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"ก้_Processing_____________________ษฺ","finalizingDrawingHint":"ก้_Your drawing is being simplified for performance and compatibility. For faster processing, avoid self-intersecting and overlapping segments_______________________________________________________________________ษฺ.","finalizingDrawingCompleteHint":"ก้_The drawing created earlier required simplification for performance and compatibility. To avoid this step in the future, don't draw polygons with overlapping and self-intersecting sections________________________________________________________________________________________________ษฺ.","deleteFeature":"ลบข้อมูลนี้","deleteFeatures":"ลบฟีเจอร์","selectFeature":"เลือกฟีเจอร์","duplicateFeature":"ฟีเจอร์ซ้ำ","duplicateFeatures":"ฟีเจอร์ซ้ำ","finalizingDrawingTitle":"ก้_Processing geometry_______________________ษฺ...","finalizingDrawingCompleteTitle":"ก้_Geometry required optimization_______________________________ษฺ","simplificationDismiss":"ก้_Dismiss_______________ษฺ"}
+{"widgetLabel":"วาด","undo":"ย้อนกลับ","redo":"ทำซ้ำ","draw":{"point":"วาดจุดหนึ่งจุด","polygon":"วาดรูปหลายเหลี่ยม","polyline":"วาดเส้นหลายรูปแบบ","circle":"วาดวงกลม","rectangle":"วาดสี่เหลี่ยมผืนผ้าหนึ่งอัน","multipoint":"วาดมัลติพอยท์","mesh":"วาดตาข่าย","freehandPolyline":"วาดเส้นหลายรูปแบบ (ด้วยมือ)","freehandPolygon":"วาดรูปหลายเหลี่ยม (ด้วยมือ)","streamPolyline":"วาดเส้นหลายรูปแบบ (ลำน้ำ)","streamPolygon":"วาดรูปหลายเหลี่ยม (ลำน้ำ)","text":"เพิ่มข้อความ"},"digitizers":{"root-point":"วาดจุดหนึ่งจุด","root-polygon":"วาดรูปหลายเหลี่ยม","root-polyline":"วาดเส้นหลายรูปแบบ","root-circle":"วาดวงกลมหรือวงรี","root-rectangle":"วาดสี่เหลี่ยมผืนผ้าหรือสี่เหลี่ยมจัตุรัส","root-multipoint":"วาดมัลติพอยท์","root-mesh":"วาดตาข่าย","root-text":"เพิ่มข้อความ","leaf-point":"จุด","leaf-distance-distance":"ระยะทาง-ระยะทาง (จุดตัดวงกลม-วงกลม)","leaf-direction-distance":"ระยะทาง-ระยะทาง (จุดตัดวงกลม-เส้น)","leaf-direction-direction":"ระยะทาง-ระยะทาง (จุดตัดเส้น-เส้น)","leaf-point-segment":"ส่วนย่อยของเส้น","leaf-autocomplete":"เติมอัตโนมัติ","leaf-right-angle":"ส่วนย่อยของฉากด้านขวา","leaf-freehand":"ส่วนย่อยวาดอิสระ","leaf-stream":"ส่วนย่อยลำน้ำ","leaf-tangent-arc":"ส่วนย่อยเส้นโค้งแทนเจนต์","leaf-circular-arc":"ส่วนย่อยเส้นโค้ง","leaf-endpoint-arc":"ส่วนย่อยเส้นโค้งปลายทาง","leaf-bezier":"ส่วนย่อยเส้นโค้ง Bezier"},"partActions":{"completePart":"เสร็จสิ้นส่วน","completeInput":"เสร็จสิ้นอินพุตปัจจุบัน","releaseManipulator":"หยุดการติดตามเคอร์เซอร์","captureManipulator":"ติดตามเคอร์เซอร์","completeDrawing":"สิ้นสุด","cancelDrawing":"ยกเลิก"},"keyboardFeedback":{"tooltip":"ความเร็วการเคลื่อนที่แป้นพิมพ์: {value}{unit}","value":"{value}{unitCompact}"},"tooltips":{"shortcutMessage":"{originalTooltip} (shortcutKey)"},"advancedSettings":{"keyboardInput":"เปิดใช้งานแป้นพิมพ์ลัดขั้นสูง"},"settings":{"toolOptionsHeading":"ตัวเลือกการวาด","freehandSnappingEnabledTitle":"สแนปวาดอิสระขณะไม่ได้สตรีม","freehandSnappingEnabledDescription":"เมื่อเปิดใช้งานแล้ว เครื่องมือเซกเมนต์วาดอิสระจะใช้การสแนปขณะที่ไม่ได้กำลังลากเส้นอย่างต่อเนื่อง","bezierEnableSplineBehaviorTitle":"Bezier วาดเส้นโค้งสไปลน์","bezierEnableSplineBehaviorDescription":"เมื่อเปิดใช้งาน เครื่องมือเซกเมนต์ Bezier จะอนุมานจุดควบคุมจุดแรกของแต่ละเซกเมนต์ถัดไปจากเซกเมนต์ก่อนหน้า"},"selectedCount":"การเลือก: {count}","selectedCountTruncated":"{truncated}+","finalizingDrawing":"กำลังประมวลผล","finalizingDrawingHint":"การวาดของคุณจะถูกทำให้ง่ายขึ้น เพื่อเพิ่มประสิทธิภาพและความเข้ากันได้ เพื่อการประมวลผลที่รวดเร็วขึ้น โปรดหลีกเลี่ยงส่วนที่ตัดกับตัวเองและทับซ้อนกัน","finalizingDrawingCompleteHint":"การวาดที่สร้างขึ้นก่อนหน้านี้ จะถูกทำให้ง่ายขึ้นเพื่อเพิ่มประสิทธิภาพและความเข้ากันได้ เพื่อหลีกเลี่ยงขั้นตอนนี้ในอนาคต อย่าวาดรูปหลายเหลี่ยมที่มีส่วนทับซ้อนกันและตัดกับตัวเอง","deleteFeature":"ลบข้อมูลนี้","deleteFeatures":"ลบฟีเจอร์","selectFeature":"เลือกฟีเจอร์","duplicateFeature":"ฟีเจอร์ซ้ำ","duplicateFeatures":"ฟีเจอร์ซ้ำ","finalizingDrawingTitle":"กำลังประมวลผลเรขาคณิต..."}